Over 1 million tech questions and answers.

windows vista 64 bit - can't install brother printer

Q: windows vista 64 bit - can't install brother printer

Hi, I cannot re-install my brother printer HL2170W. I have seen here a post that had the link to the website for the latest drivers...went there and when i unzip the file there is no setup file or even an executable file that gets zipped. Am i missing something?

Prior to this, I ran the install of the latest drivers (I think) from the website for 64 bit vista. Then it went through the installation and completed but the printer does not show up on the control panel. So, that is why I tried to follow the instructions posted here.

Thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: windows vista 64 bit - can't install brother printer

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 75.2

I cannot find a driver when trying to install the printer over my home network.Printer is installed and working on Dell XP 3100
Printer has prevously been installed via usb on Tosh Win 7
Printer & file sharing are set up on both computers
Files and printers can be seen from the Tosh that are on the Dell.
When i try to install, I get error message that a driver cannot be found. Remeber the printer is installed locally on both machines... so drivers are present.
Does anyone know how to direct to the driver? I do not have an printer install disc... installed from download.

thanks
JP

A:Install Brother HL-1440 as network printer on Windows 7

With my Brother, running the downloaded installer finds the printer already on he network. Sets it up and install the drivers. Otherwise, W& will try to use it's geneic WSD, which is not bidirectional.
I did have a problem that I resolved by completely uninstalling and re-running the latest installer from Brother's website. Hope that helps.

Read other 1 answers
RELEVANCY SCORE 70.8

I have Windows Vista Home Premium 64 bit version and the install of the Brother DCP 7065DN is causing me grief.

The copy and scan functions are operable, but not the printer function.

I am logged in as Administrator in Vista.

Printing a test page returns an "access is denied" message.

So I try to open as administrator and trying the Print test page, returns message "Printer not installed"

I have tried the XP compatibility mode as well as XP and Win7 printer drivers but no success.

I have had no problem installed the printer on another hard drive with Win 7

Brother says my Vista is corrupted and contact support.microsoft.com . How nice, Doing a web search, it seems that Brother definitely has compatibility issues with Vista judging on all the posts. Unfortunately I see few solutions.

Any takers out there?
 

A:Brother Printer DCP 7065DN printer driver won't install

Read other 14 answers
RELEVANCY SCORE 67.6

Here I go again. I asked this before and the problem was solved. However I installed a new and upgraded mobo and cpu. The printer will not install now. For general safety I reinstalled W10 and all my programs. I downloaded and ran the Brother drivers setup.exe. All I get is "machine not found". This is so even though after running setup.exe the Brother mfc-j895dw printer appears in Devices and Printers each time I attempt the install though I remove that device each time. I even tried the previously failed cd install just in case but it still fails. Setup.exe runs and decompresses all the files into a folder Install which contains setup.exe. I deleted that folder and the driver download and tried running setup several times to no avail. I deleted the downloaded file, the Install folder, and the printer from Devices and Printers before attempting each reinstall. I disconnect the Brother from everything before starting setup and only reconnect it when installation says to reconnect. I also set the printer as the default printer each time to no avail.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: AMD Ryzen 3 3200G with Radeon Vega Graphics, AMD64 Family 23 Model 24 Stepping 1
Processor Count: 4
RAM: 16310 Mb
Graphics Card: NVIDIA GeForce GT 710, 1024 Mb
Hard Drives: C: 111 GB (64 GB Free); H: 465 GB (369 GB Free); I: 931 GB (817 GB Free);
Motherboard: ASUSTeK COMPUTER INC., ROG STRIX B450-F G... Read more

Read other answers
RELEVANCY SCORE 67.6

If you check posts by chuy123, he had the same problem as I do.An error message appears during installation of the Brother printer driver as follows: "An error occurred when copying file BRSM9569CDW_0000.DSI. Cannot copy file to destination directory." I spent over an hour with a Level 5 tech support person at Brother and he could not solve the problem. Any suggestions as to what can possilby be blocking the file from being copied?

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 3.00GHz, x86 Family 15 Model 4 Stepping 4
Processor Count: 2
RAM: 2046 Mb
Graphics Card: NVIDIA GeForce 8400GS, 1024 Mb
Hard Drives: C: Total - 39542 MB, Free - 13132 MB; F: Total - 20316 MB, Free - 12522 MB; G: Total - 26231 MB, Free - 21542 MB; H: Total - 29721 MB, Free - 29574 MB; I: Total - 30914 MB, Free - 30175 MB; J: Total - 45739 MB, Free - 41362 MB; K: Total - 21108 MB, Free - 6293 MB; L: Total - 21108 MB, Free - 21040 MB;
Motherboard: Dell Inc., 0X8582
Antivirus: Avast, Updated: Yes, On-Demand Scanner: Disabled
 

Read other answers
RELEVANCY SCORE 67.2

Not sure if this is the right place to post this question ?

Just purchased a Brother MFC-490cw all-in-one printer. I have 1 desktop hard wired into it ( Cat5) from printer into router.

I can't get my Vista laptop to see the printer at all.

I have everything setup in Infrastructure Mode (printer hooked up to router hard wired & laptop hooked up to router wireless).

Forgot to mention that I have a D-Link basic N wireless router (DIR-615).

What do I do ??
 

A:Can't get my Vista laptop to see my Brother printer ?

Read other 6 answers
RELEVANCY SCORE 67.2

Hello all,
Just bought a Brother mfc-5490cn and am having issues installing the software suite to print from a PC via an ethernet connection.

Every time I attempt to install it, towards the end of the installation while it is installing everything I get this error message.

"

An error occurred during the installation.
Please restart your PC, ensure all applications are closed
- Then reinstall "MFL-Pro Suite".

ISO34- InstallNetworkDriver - 1
"

When I hit the "Ok" button, the installer hangs and I have to end task it.

Any ideas as to what may be causing this?

I am running Win XP Pro service pack 3 using an admin account.

Thanks in advanced.

A:Unable To Install MFL-Pro Suite For Brother Printer

I would try installing it in Safe mode
If you do it in normal mode, I would disconnect from the net, turn off your AV, firewall, and any spyware scanners that monitor registry changes like Spybot's Teatimer function

Read other 1 answers
RELEVANCY SCORE 67.2

I am running into a problem trying to install a Brother QL-800 label printer on a Dell Desktop running 64 Bit Windows 8.1 Professional. The driver installer was downloaded directly from the Brother website Support download page for that model. The installation procedure took a while and completed without any kind of failure or warnings.

The previously installed P-Touch labeling software could not find a compatible label printer and chose the Windows default networked laser printer as the output device. The QL-800 was powered up and connected by a USB cable to the computer before launching the P-Touch software. When I checked the Windows Devices & Printers control panel, the QL-800 was listed as a storage device under Devices instead of under Printers. I removed the device and ran the Brother cleanup utility to remove the drivers and then repeated the installation procedure with the same results.

The user had been using the P-Touch software with an older QL-550 label printer that was starting to have mechanical problems but otherwise was working OK with the P-Touch software. It was not connected to the computer when I removed it from the Windows printer list before I installed the QL-800 drivers. The software was able to immediately recognize and use the QL-550 when the USB cable was moved from the QL-800 to the QL-550.

What do I need to do to make the QL-800 install as a printer? I am leary of uninstalling the QL-550 drivers as the user does need to print labels on a r... Read more

Read other answers
RELEVANCY SCORE 66.4

usb Brother 2142 laser printer on xp works fine, but vista says XP machine has the "wrong driver" and cannot connect.

Both machines can see each other perfectly otherwise.

Please, does anyone know how I can fix this, or know a workaround?

A:vista 64 cannot share xp usb brother laser printer

my recomdendations with printers throw it out the window lmao hate em

best thing to do is go to the website and find the driver

last option go into device manager and see if it is reading it wrong or found it

Read other 3 answers
RELEVANCY SCORE 66.4

I have a relatively new Brother HL-2170W that was working perfectly by USB instead of wireless. A few days ago, Windows Vista Home Premium 32 bit installed Vista update 2 and since then, the printer has not worked. The printer software loads the printer into printers on control panel and shows ready and is set at default. However, when you send a document to print, it shows 1 document but show error. I have another printer (all in one) Brother MFC-7420 that works fine. When I open the Device Manager and select view all, the HL-2170W is not shown. When I up-plug the 2170, and plug in the MFC 7420, the device manager picks it up and when you select view all, the MFC-7420 is shown. No matter what I have tried, the HL-2170W will not work. Remember it was working fine until Vista update 2 installed. I would appreciate anyone's help.......!
 

A:Solved: Brother Printer is not Recognized by Vista

Uninstall your Hl-2170W...

Go to the website below, download and install the new drivers...
http://www.brother-usa.com/Downloads/Default.aspx
 

Read other 1 answers
RELEVANCY SCORE 66.4

Hi since changing to W10 I am unable to install the above on my lap top, both worked fine on my old vista machine, little notice comes saying something like ..incompatable with the O.S, is there away to get around this ?
The printer, an Epson DX4400 is a few years old I know, but it is still very good and I dont really want to get rid of it, any help / suggestions would be appreciated.
Thanks.

A:Unable to install Epson printer or Brother Labeller

Vista came in 2006 and Windows 10 in 2016.
Try Installing the Driver in compatiablity mode.Right click the Driver setup file and select properties>compatiablity>Run this in Windows vista.
50-50 chances that it should work.

Read other 0 answers
RELEVANCY SCORE 65.6

System - Dell 1501 , OS - Vista home ..Printer : Brother MFC 440CN ..Printer gives an error while installing that "system doesnot have enough space it requires 44MB of space" wheras i have 77GB of HDD space free. I tried to uninstall MFC pro suite from add remove ..it gives an error, " the cd from which you are trying to install doesnot have drivers for this OS" . i have also downloaded windows installer clean up & removal tool from brother website. Its not removing the program from add remove.. Kindly suggest
 

Read other answers
RELEVANCY SCORE 63.2

Hi,

Hope this is the correct Forum for Printer questions.
Is it ?

Have a 5 yr old Brother printer (HL-2140) which uses a TN-360 ink Cartridge.

A Brother branded "high yield" TN-360 goes for about $ 50. Wow.

I see that Amazon carries several other non Brother, but supposedly compatible
TN-360 cartridges by mfg. names I've never heard of.

Much, much cheaper.
Am willing to try one, but am very uncertain which of the brands to go with.

Anyone have any experience with non Brother labeled "compatible" cartridges ?
Any good ?
Which Brand should I try, perhaps ?

Note: It's almost worth buying a brand new Brother printer instead !

Thought on ?

Thanks,
Bob

A:Brother Printer and Non-Brother Branded Ink Cartridges ?

Hi, again:

You will likely find that the answer to this question falls into 2 major camps:
Only use OEM, branded ink from the printer manufacturer (or a trusted, high-volume, reputable seller), OR
It's perfectly fine to use knockoff, refurb, non-branded
I don't know anything about Brother, as I have been using HP printers/all-in-ones since the days of the printing press.

No matter which brand, in the printer industry, the ink/toner is how the manufacturer makes its money, not on the hardware.

There are many factors in the risk:benefit calculation, such as budget, volume of printing needs, need for optimal performance, etc.

My own personal experience for relatively heavy home/home office use is that it is not worth skimping on the cost of discounted ink/toner.
There can be serious quality issues with the cheap stuff (even branded, refurbished ones).
And there can be quality issues even when buying "new" OEM ink/toner from 3rd-party sites or even brick and mortar big box stores (the items may be legit, but they are stale).
If the price seems too good to be true, it probably is.
HP has a terrific ink/toner program -- 2 or 3 mouse clicks and I have the products on my doorstep 1 or 2 business days later, with free shipping. The price is highly competitive, and the ink/toner is always fresh and high-quality. This works very well for me.

Your mileage may vary, of course....
Cheers, MM
P.S. Did you resolve the other issue reported HERE??? If so, it helps us (a... Read more

Read other 4 answers
RELEVANCY SCORE 61.2

I just set up my new Dell with Windows 7. I connected it to my Brother MFC-8840D printer with a USB connection. Windows 7 recognized the printer and set it as default. But I cannot print anything. I called Brother, and the person said that the proper driver was in the computer. However, she then sent me an email which indicated that Brother does not offer a driver for this unit with Windows 7, but that an appropriate driver can be found on Windows Update. I had no success going to Windows Update. Does anyone have an idea (short of having to buy a new printer)?

Thanks.
 

A:Windows 7 and Drivers for a Brother Printer

I'd try to get clarification from the tech support person about getting a working driver via Windows Update, and why it didn't work for you.

If Brother has a Vista driver try that.

Or try the Vista or XP driver using the Troubleshoot Compatibility option (assuming you have a self-installing executable right click on it to get that option). You can spend the better part of an afternoon with the "recommended" settings, and with XP or Vista with various service pack levels. Oh, and sometimes this works. Start reading from post # 18 in this thread to see how this technique worked for some USB wireless adapters.
 

Read other 1 answers
RELEVANCY SCORE 60.4

Hi,

Please guide me how I can get a driver for my brother printer HL -1030 for Windows 7. I called Brother office in Canada and they say this printer is not compatible with Windows 7. Is there any other printer driver I can download and get my printer working.

Thanks in advance.

Wonderdollar

A:Brother HL-1030 printer driver for Windows 7

You should be able to use the XP drivers and install them in compatibilty mode.

Here's a link to the XP Home/Pro 32-Bit Drivers
Brother Solutions Center: HL-1030: Downloads: Others

To run the installer in compatibility mode:

Right Click Installer > Properties > Compatibility > Select the OS you want. (In this case, XP)

Read other 9 answers
RELEVANCY SCORE 60.4

Hi thanks for solutions in advance.
I have a Hp compaq nx9005 running on Xp, a surface Rt and a brother printer Mfc-5890cn.
The problem I have is firstly no internet so currently running on personal hotspot.
I am searching for solution to transfer files to print to printer. I have tried iprint app on mobile.
Have bought a memorystick to transfer from Rt to Xp, with original thoughts of transferring from memory stick then printing from here. Have tried never ware cloud ready download but link fails.
Is there another simple solution to just transfer and print from and to the devices. Thank you
 

Read other answers
RELEVANCY SCORE 60.4

I'm trying to figure why this keeps happening and how to get my printer offline. I've gone to Print Management, right-clicked on the printer (under the 'All Printers' list), went to 'Properties', and have no idea what to do next. I've looked at similar questions
on your Tech support page and it looks like there are answers but no helpful ones. Everyone seems to be having issues with Windows 8 and their printers being offline. Please help!

Read other answers
RELEVANCY SCORE 59.6

Recently got a new laptop (with windows 10) and switched to cable internet.
My printer says it is connected to wifi, my laptop is connected
I can only print if it is connected with a cord

someone said it could be a windows 10 issue??

my printer is a brother mfc-j875dw

HELP greatly appreciated!!!
 

A:Brother printer not printing wifi - windows 10 issue??

Hi and welcome!
I found these steps from Brother's support section of their website.

1. Turn off your Brother machine. Wait a few seconds, then turn it on again.
Wait at least three minutes for the machine to join the network.
If the issue continues, go to STEP 2.

2. Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and the Subnet Mask.
> Click here to see how to use the Network Connection Repair Tool
If the issue continues, go to STEP 3.

3. Check your machine's wireless status by printing the WLAN report.
> Click here to check the wireless status on the WLAN report.

If your WLAN report is stating "Connection OK", although you can not print, refer to "Check the wireless status on the WLAN report" and check "Connection: OK"
 

Read other 1 answers
RELEVANCY SCORE 59.2

I've installed a Brother HL-1240 laser printer on a new Windows 8 computer. Brother says that Windows has built in the driver for this printer. Sure enough, the printer appears on my device list. However, the printer preferences says that the maximum resolution is 300 dpi. The specs for the printer clearly state a max resolution of 600 dpi.

When I used the printer on an XP computer I got 600 dpi.

Has anyone else run into the problem of the Windows 8 printer drive not allowing the maximum printer resolution?

Any solution? I chatted with Brother support and they said that since Windows created the drive that there was nothing Brother could do.

BTW - The printer functions in Windows 8, it just can't supply the max resolution so many of my pdf prints look pixelated.

A:Windows 8 built-in Brother printer driver caps resolution

Originally Posted by ChrisVan


I chatted with Brother support and they said that since Windows created the drive that there was nothing Brother could do.



Just my two cents but I seriously doubt that the Win 8 developers are in the driver development business for all 3rd party hardware. Just because it is inherently available via Windows 8 installation methods does not mean that it was created by the Windows 8 developers. With that said, I would be going back to Brother support and tell them that "they" made a mistake when they submitted that Win 8 driver for inclusion in the Win 8 operating system. Specifically, they forgot (or knowingly) did not include the 600 DPI option. And, while you are at it, ask them if there might be an alternative driver (w/600 DPI) available that might work for your specific printer. Good luck.

Read other 1 answers
RELEVANCY SCORE 57.2

Hello, my brother has windows vista pc. He wants windows 7 too, is there anyway he can switch from windows vista to windows 7? :O. Like not a hard direction, he wants easy directions. Can you do it without a dvd?

A:My brother Has windows Vista

Below is a link to a tutorial that includes all of the relevent information. Note that you/he will need to buy an Upgrade version of Windows 7.

Upgrade Install with Windows 7

Read other 8 answers
RELEVANCY SCORE 55.6

Good Evening,

I am using Windows 7 and recently had to reinstall it. I also reinstalled my Brother printer software from the original CD that came with it including the scanner driver. Everything installed except the scanner driver. I uninstalled all the Brother software and then downloaded the drivers from the internet and still I got the same result, no scanner driver installed. I repeated this multiple times and the scanner driver just won't install. Does anyone know if this could be a glitch with Windows 7? Previously before I reformatted with Windows 7 the scanner driver installed.
 

A:Brother MFC-J825DW Scanner Software Won't Install on Windows 7

Are these the drivers you download Bossard Full Driver & Software Package I am assuming you have Windows 7 (32-bit).
 

Read other 1 answers
RELEVANCY SCORE 53.2

hey guys,

i just recently bought a brother all-in-one printer (model # MFC-495CW) and was wondering how to use the feeder on the top of the machine to do couble sided copies/scans?

if you could help that would be awesome
 

Read other answers
RELEVANCY SCORE 53.2

Today i found my brother HL - 1210 printer no respond, any suggestion?

Davidnaoe

Read other answers
RELEVANCY SCORE 53.2

i just got a Brother MFC-4420C multifunction printer, i went onto the Brother site, downloaded the drivers, etc. and tryed 2 run the driver, and got this messgae, any1 know why? thanks :
 

A:Brother printer

Read other 9 answers
RELEVANCY SCORE 53.2

My brother printer won't print double sided ever since my hard drive crashed. I have a new hard drive now. I completely uninstalled printer and started over from scratch. Updated software and driver. My iPad will print to the printer and do double sided printer but not my laptop. What else can I do?
 

A:Brother printer

Please post only one thread relating to your problem. Posting multiple threads for the same problem makes it difficult to help when suggestions are spread across multiple threads, and it is against forum rules.
 

Read other 1 answers
RELEVANCY SCORE 53.2

Windows 7 Professional

Haven't had the need to use my printer in a couple of weeks, so I don't know when the problem started. It is a Brother HL-2270DW that has been problem free. There are tests that can be tried using the printer itself and it says it has a good connection and should be functioning.

Nevertheless, when I click on print, the available choices are Microsoft XPS Document writer and Fax; the Brother unit is not included as an option. When I enter the control panel and look at the devices, my printer is mentioned with a Troubleshooting necessary indicated, but letting the troubleshooter do its job does not provice any suitable result.

I returned to a restore point the 23 of this month, but am not wanting to go much further back, because except for the printer problem, my computer is working great, and I don't want to remove necessary updates, etc. that might create a whole new problem.

I have shut down for half minute and restarted the printer to see if it might provide a benefit, but when I restart the printer, it's self trouble shooting feature suggest that the unit is both attached and working properly. Toner is over 90% remaining. BTW it is wifi and my router seems to be working perfectly. Drivers are latest.

Thanks for any input!

A:Printer problem needs guru. Looks like Windows not Brother problem.

Do you have it setup as a wireless printer? If so, reinstall the printer driver but use a USB cable initially.
Once that is working then setup wireless.

If you don't have the CD or can't find it, the drive is available from the Brother web site (I have the same printer).

Read other 6 answers
RELEVANCY SCORE 52.8

It will not print when I select print from computer or will not print when I try to copy. But it will print if I scan and then select print. I am elderly and know very little about computers and printers. Thanks for any help you can give me.
 

Read other answers
RELEVANCY SCORE 52.8

I had a paper jam in my Brother MFC 5440-CN. Cleared the jam, but printer still wouldn't print. It was balking because it thought that three of the ink cartridges, which were all at least 1/3 full, were empty.

Usually I've been able to get it to print anyway, but this time I gave up, finally, and replaced the cartridges with new ones; also I unplugged and plugged it, made sure the paper tray was just right, and then - ta-da! - got it to print a page.

Foolishly allowing this success to go to my head, I decided to run the printer through a cleaning cycle, after I printed out a test pattern that was a little bit off. At that point, the printer beeped several times in its charming shrill, high-pitched way, and ever since has been displaying "Unable to print - see troubleshooting and routine maintenance chapter in user's guide". Also, it won't shut down unless unplugged.

There wasn't much that was relevant in the guide, other than things I'd already tried. When I plug it back in and try to print something, it makes a ratcheting sound that is not part of its normal printing sounds, so I turned it over and put some oil on a horizontal metal rod that must be part of the paper feeding mechanism. This did nothing except guarantee greasy print-outs if I ever get this thing going again.

I attempted to reinstall the drivers. The Brother Solution Site says to download them and choose "desktop" for their destination, after which you ca... Read more

A:Brother printer on strike

Read other 8 answers
RELEVANCY SCORE 52.8

anyone got any experience with this machine? I called the tech support line - and it was a total waste of time. Ready to return the product if I can't get some answers to envelope printing problems
 

A:Brother MFC9420 printer

Read other 6 answers
RELEVANCY SCORE 52.8

Hi everyone, please guide me in solving this problem..!
Before, I can automatically scan files directly to email as an attachment by just going to scan button and go to "scan to email" and it will just appear directly but now i can't do it automatically. I can scan now but by just manually clicking "scan and camera wizard" this thing works but it just appear to be save as a file not directly to email as attachment. it takes me too long to scan many files. hope you could help me.
 

Read other answers
RELEVANCY SCORE 52.8

Hi All!
I have a Brother P-Touch PC label printer and I am using Windows 7 32 bit Ultimate. Brother does not have a driver for Windows 7 and it appears neither does Microsoft. Since I have a considerable stock of label cartridges I would love to continue to use this printer. Any ideas on how to make the printer work again?

Thanks in advance, Ed

A:Help with Brother P-Touch PC printer

Hi whats the full model number of the printer? have you tried installing the driver in compatibility mode?

Read other 4 answers
RELEVANCY SCORE 52.8

I am trying to print a trial balance using peachtree DOS program and the above printer.

It prints alright but extends every page of trial balance into two pages. For every page, it prints
the last line on the next page and then goes on to next page. I am trying to say that
it uses 4 pages for 2 pages of print material. If it can print 2 more lines on a page, then it can
accomplish this task in 2 pages. At present the printer setup will only allow 60 lines/page.
Is there a compression code that I can use to increase the no. of lines that the printer will
print per page?

Any help will save me half the no. of pages.

Many thanks.

Best regards,
Gulab Gidwani
 

Read other answers
RELEVANCY SCORE 52.8

Hi All,
I'm trying to install drivers for my Brother MFC 210c printer.
I have uninstalled the old drivers, unplugged the printer, and tried to install the new drivers, BUT ... I get error code 0x80040705? Installation process is terminated.
Any help would be greatly appreciated.

A:Brother Printer error

Hi after uninstalling the driver check the the registry under local machine>software> find the printer name driver,, I mean see if there is any left over there..
you can also try to use revo uninstallator Revo Uninstaller - Free software downloads and software reviews - CNET Download.com to remove the previous printer driver.. obviously the uninstallation is leaving leftover files..

Read other 1 answers
RELEVANCY SCORE 52.8

When printing, the printer box opens and says "printer off line" when it isn't off line. This happens about every 3rd print job. Any ideas? Regards
 

A:brother hl630 printer

Hiya

Have you made sure that the Plug that goes into the printer and PC is secure? It may be loose.

Also, what version of Windows are you running? Now, go to Control panel | System. Device Manager. Under Printers, is there a yellow !

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 52.8

I tried printing a PDF document from Windows 8 PDF reader but continually got the following message. The printer drivers are installed and I can print from both notepad and Microsoft Word making it strange that I cannot do the same from the PDF reader (built into Win8). Any suggestions will be welcome.

A:Brother HL-2170W Printer

Anyone else having problems printing from the Win8 PDF reader?

Read other 9 answers
RELEVANCY SCORE 52.8

All my colors are printing with the exception of the black ink! All wells are full of ink
including my black! I can't get it to print from WordPerfect,WordPad, etc.
 

Read other answers
RELEVANCY SCORE 52.8

after clearing paper jam my Brother DCP-130C the printer doesn't work and on the LCD panel i read "print unable 50, see user guide, etc.."
I couldnt find the meaning of the 50 code and Brother do not recognize it.
Where can I find the explanation in order to repair the problem if possible?
Tanks
 

Read other answers
RELEVANCY SCORE 52.8

Hi everyone,

A few months ago I bought a new laptop (Compaq Presario C700, nothing special), which brought me my first (sometimes frustrating) experiences with Windows Vista. I now want to use a printer my uncle gave me; a Brother HL - 1030 Laser Printer.

Now my problem: I can't install proper driver software.
I have the software, but it won't install. It says that NT 4.0 drivers are blocked by an enabled policy on my computer. I've found something on that on this forum (http://forums.techguy.org/windows-vista/766895-solved-nt-4-0-driver.html) but when I enter a port name, it says: 'the network path was not found.'

I've also searched on the Brother site for help, but they don't have any driver support for Windows Vista and the only service program available for download is to uninstall driver software

I'm a little nooby, but I put in effort to try and solve this.
Please help me do this and get a nice drawing I made as a reward

Greets,

Guus Evers, Breda, Holland.

 

A:Installing my Brother printer

Read other 7 answers
RELEVANCY SCORE 52.8

I am unable to print envelopes using Word 2010 on my Brother MFC7840W printer. Envelope info is sent from computer and received by printer, but envelope exits printer without any print.

Printer seems to work for all other printing functions.
 

Read other answers
RELEVANCY SCORE 52.8

My brother DCP 7020 printer will no longer print the printer just keeps restarting over and over. I am running win7 Home Premium 64 bit
 

A:Brother DCP 7020 Printer

will no longer print the printer just keeps restarting over and overClick to expand...

is this when you first switch on ?
or when you send something to print

does it photocopy ?

user manual
http://www.brother-usa.com/ModelDocuments/Consumer/Users Manual/UM_DCP_7020_EN_1154.PDF
 

Read other 1 answers
RELEVANCY SCORE 52.8

I have got a problem with a brother 1660e printer. When you print a page only the top 1/4 of the page prints off. I have replace the drivers, and check versions can seem to find anythin wrong with it!

Any help appreciated.
Cheers
rutter
 

Read other answers
RELEVANCY SCORE 52.8

If you are having any query related Brother Printer Support dial Brother Printer Support number 1-800-889-3692 and Get 24X7 Brother Printer Support with Brother Printer Support technical support team.
 

Read other answers
RELEVANCY SCORE 52.8

My computer won't work with my Brother (MFC- L2740DW) printer. It keeps throwing up an error box:

Printer not activated error 30

So the question is...How do I activate my printer?
 

Read other answers
RELEVANCY SCORE 52.8

I have a Brother dcp 165c printer and cannot get the magenta cartridge to work. I have tried cleaning it via the ink management option but nothing happens. How can I manually clean the nozzle and/or print head? Thanks.
 

Read other answers
RELEVANCY SCORE 52.8

Regarding imy Brother printer MFC-J430w...stopped working for no explainable reason.  I was using it wireless.  I plugged it in to see if it would start printing again.  I have tried driver update in Windows 7 to no avail.  Does anyone
have any idea how I can reconnect with my printer?  Please. 

Read other answers
RELEVANCY SCORE 52.8

Hi again...

I have a Brother All In One which was working fine in Windows 7 but is now contstantly showing up as "offline" in the print queue. I have a home network with my "main" machine my desktop running Win 7. I have 2 other laptops - one is a HP with Vista, and the other is a Macbook Pro. I have been able to print today from the laptops, but the desktop (Win 7) tells me that the machine is offline. To be clear, the machine is on, and is connected to my network.

Windows 7 is being stubborn and is not recognizing that it's online. I've printed to it in the past and now it's not cooperating (when I need it to, of course).

Help.

A:Brother Printer Offline

Did you try uninstalling/reinstalling the print driver?

Read other 9 answers