Over 1 million tech questions and answers.

Need Help with UEFI settings in Window 10

Q: Need Help with UEFI settings in Window 10

Need Help with my UEFI settings in Window10. I had recently done a clean install on my 1TB HDD. I formatted the entire disk and recreated partitions using Windows 10 DVD. The windows installed fine but the problem is I can only boot into the OS through "Windows Boot Manager", if I select my HDD option all I get is a blank screen with a blinking cursor. I am not sure what exactly I need to do to get it to boot from my HDD. Earlier I used to have multiple OS but at present I am only using Win 10. Also I have attaching my system info which can help further.

Secondary Question: Is it normal to boot from "Windows Boot Manager"? What are the Pros and Cons associated?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Need Help with UEFI settings in Window 10

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 61.2

I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode.
All options are blanked out except for "exit". How can I get it to let me edit the settings again?

A:Cannot change UEFI settings / UEFI stuck in read only mode

You may have to disable the "Secure Boot" option first.

Read other 10 answers
RELEVANCY SCORE 50.4

HelloI need to alter the virtualisation settings in UEFI but have no acceess to the settings.BIOS version is  L70 v.1.34 (recommanded HP update) after upgrading from  version v.1.08.This laptop was upgraded from Win 7 Pro 64 to Win 10 Pro 64Productnumber D5D93AV System Information tells me BIOS mode is Legacy. Access via settings --> updates&Security -->Recovery -->Advanced Startup -->Troubleshoot -->Advanced Options gives me NO UEFI button. Access via Start --> Power --> restart (with shiftkey enabled) gives me an option menu.If I select Troubleshoot -->Advanced Options --> there are still NO UEFI button. Access via F10 BIOS Setup gives me a HP GUI (not an oldschool DOS enviroment as in AWARD BIOS) and:Question Login as a guest user?  with two buttons YES or NOIf I mouseselect NO I get three possibillities to login under my account.If I do so and give my password I end up in a Main - Security - Advanced HP Computer  Setup menu.In the Advanced Menu I see the desired checkboxes which are greyed out and not selectable. In the current configuration I cannot update my Windows 7 virtualized enviroment unde VM ware. Please help me to get rid of the Legacy mode of the BIOS and get me into the UEFI-settings for running VMware properly.     

Read other answers
RELEVANCY SCORE 50.4

I Have Acer Aspire 4745 Laptop which has windows 8.1
I want to install Windows 7 But My BIOS does not have any UEFI Option.
Please Help Me!!

A:UEFI Settings Not Available..How To Go Back To Win 7?

You don't need UEFI for Win7.
Burn an ISO with Rufus and select MBR setting.

Read other 1 answers
RELEVANCY SCORE 50

Whenever I add an attachment to my emails, and even here on your website when I uploaded the attached pics, the 'Choose to Upload' pop-up window containing (in this case) my pics ALWAYS (but never used to) opens in the Details mode instead of Thumbnails where I can actually view the pics to be attached prior to attaching them.
I would like the default setting for this occurrence to obviously be in the Thumbnails mode.

In a related issue I would also like to be able to load more than one pic at a time when attaching pics to emails, etc...
Is there such a setting?

Thanks for the assistance
 

A:Default Settings for 'Choose File To Upload' Window, Window displays 'Details' vs 'Th

Read other 15 answers
RELEVANCY SCORE 50

I can't see UEFI BIOS Firmware settings in Windows 8.1 repair Troubleshoot section.

A:UEFI BIOS Firmware settings

How to access UEFI Firmware settings on Windows 8.1

Its not available in my system.

Read other 6 answers
RELEVANCY SCORE 50

I am unable to modify my UEFI security settings including virtualization, it's perfectly supported by my CPU but I don't get an "Enable" option. HELP ?

Read other answers
RELEVANCY SCORE 50

Hello all,
My system specs are the following: Windows 10 Enterprise 64-bit UEFI Bios Phoenix BIOS version and drivers are updated, also confirmed by Slimdrivers. Samsung Series 5 ULTRA 530U4C-S02PT Also: It is an hybrid drive, 1TB HDD & 24GB SSD that is supposedly well installed (the laptop never been so fast after formating and installing windows 10 with express cache to take advantage of SSD hybrid boosting). Windows works like a speedster the only problem is the inaccessibility of BIOS, for example i want to enable the virtualization VT-X to install Oracle VM and i can't go BIOS to edit virtualization.
Problems: UEFI BIOS firmware settings boot dialog is inaccessible.Not working suggested fixes:

i) hotkeys Esc, F2, F4, F8 and F10 don't log in BIOS. Although safe mode, debug logging, etc are available. Disabling Fast Bios in the control panel > power management dialog doesn't do anything.ii) automatic repair seems to give an error, after the account is specified in the repair boot dialog it gives error.iii) recovery > Advanced options > UEFI Firmware Settings Boot is not Visible.iv) EasyUEFI free only works with Windows 10 Home, not Enterprise (it would resolve the issue appropriately with the boot into UEFI option) Sources:
Cause (according to internet forums): i) Probably my uefi has Secure Boot Enabled and Fast Boot also, making the boot system almost instantaneous and rendering other boot scenarios blocked. Because system is only seeing the SSD drive as b... Read more

Read other answers
RELEVANCY SCORE 50

Hello,

I am really confused on what settings are required in the UEFI Bios to run recovery USB/ disks or Linux live CDs.
It all used to be so simple. The manufacturer helpdesk seems unaware that it supplies UEFI systems - so I am working blind. Have tried boot CDs and USBs but all have booted straight into Windows to date.
Perhaps there is a basic guide but I have not found one yet.
I don't wish to change settings I have no understanding of.

I have a Medion /Lenovo desktop with an AMI UEFI Bios (12 July 2012) and Aptio Setup.

The following seem relevant are supplied as enabled in "Bios":

Intel Rapid Startup Technology
Quiet Boot
Boot Select Mode [UEFI]
UEFI Hard Disk BBS Priorities - Boot Option #1 - Windows Boot Manager
Secure Boot - Secure Boot Mode [Standard]

What do these all mean and what effect do they have on how Windows 8 runs and how boot drives run?

A:UEFI Bios Settings for Windows 8

To boot a DVD/CD/USB drive, the bootable software DVD/CD/USB disc need have full supports Windows 8, UEFI, GPT & Secure Boot & signed by Microsoft.

Boot the disc in UEFI mode from the One Time Boot Menu, check your manual for the F? key.

Read other 13 answers
RELEVANCY SCORE 50

Hi All,

I'm having my first encounter with UEFI on a new(to me) HP Laptop with Windows 8.1. (excuse the noobiness)
I have read/Googled quite a bit and am trying to understand.
If I understand the basics of the UEFI BIOS and "Key" and OS/Software needs a matching "Key" to be able to install.
I understand that along with this, there is a new method of partitioning "GPT" to support the UEFI/Safe Boot/Key.

To my questions/quries,

1. I have a set of "Full Recovery Disks",
Which I assume are able to put the Laptop back to original even if disk is replaced,
So the recovery disks will re-create the disk partitions(GPT?) to work with UEFI..??

2. I want to be able to boot from USB to try Linux Live boots.
From what I have read, I need to disable "Safe Boot", and enable "Legacy" mode, is this correct..??
I do understand this will bypass the extra security that "Safe Boot" brings.

Not sure if I should do another post for this one, but here goes.?
I have a Retail Windows 8.0 Pro Install disk, unopened with Key.
Can I install that on this Laptop, or is it only for use on a machine with No OS.?
If it's a YES, am I right to assume that if I removed all partition from the disk, like it was new,
It would create the necessary partitions/format to work with the UEFI BiIOS..??

Many Thanks
Dave

A:UEFI Settings for USB Boot and Recovery.?

HP Laptop with Windows 8.1



1) yes, will reinstall Windows 8.1 x64 HP OEM version.

3) Why would you downgrade to Windows 8?

2) The right version of Linux will boot with Secure Boot & UEFI.

Read other 4 answers
RELEVANCY SCORE 50

Hey guys,
So Im trying to install a new graphics card, and I have to tweak some settings in the bios. Unfortunately, when I try to open it(pressing escape at startup, scrolling down, and selecting uefi settings and pressing enter) nothing happens. I looked this up, and it said to go to advanced startup and go through some steps to get to a menu that supposedly contains "uefi firmware settings". Now, I confirmed that this is the right menu, but the option is just not there. I thought about updating my BIOS, but there are no updates for it available.
Does anyone know what do?
Thanks in advance

A:Cant acces uefi firmware settings

Can you confirm that you do have UEFI Bios? The simplest way to do this is check via System Information (type in the search box) and see what it says. E.g.

Read other 1 answers
RELEVANCY SCORE 50

I have replaced the HDD with SSD on my 6 month old Win 10 Satellite C55 the idea is to install Win 7 on it. Problem it will not read the installation disk,
suggestion's given disable UEFI ect I cannot get into this section as it is grayed out.

Read other answers
RELEVANCY SCORE 49.6

HelloI need to alter the UEFI-settings but have no acceess.BIOS version is  L70 v.1.34 (recommanded HP update) after upgrading from  version v.1.08.This laptop was upgraded from Win 7 Pro 64 to Win 10 Pro 64Productnumber D5D93AV System Information tells me BIOS mode is Legacy  instead of UEFI. Access via settings --> updates&Security -->Recovery -->Advanced Startup -->Troubleshoot -->Advanced Options gives me NO UEFI settings. Access via Start --> Power --> restart (with shiftkey enabled) gives me an option menu.If I select Troubleshoot -->Advanced Options --> there are still NO UEFI settings. Access via F10 BIOS Setup gives me a HP GUI (not an oldschool DOS enviroment as in AWARD BIOS) and:Question Login as a guest user?  with two buttons YES or NOIf I mouseselect NO I get three possibillities to login under my account.If I do so and give my password I end up in a Main - Security - Advanced HP Computer  Setup menu.In the Advanced Menu I see the desired checkboxes which are greyed out and not selectable. In the current configuration I cannot update my Windows 7 virtualized enviroment unde VM ware. Please help me to get rid of the Legacy mode of the BIOS and get me into the UEFI-settings for running VMware properly. Rgds. from Peter

Read other answers
RELEVANCY SCORE 49.6

I installed Windows 8.1 (64) with UEFI in my Asus X550L laptop (I refer this forum UEFI USB guide). After the installation I can see 4 partitions. Just like the tutorial mentioned. Once the Windows 8.1 installation completed I try to boot into the UEFI settings menu, but it boot into the BIOS.

In BIOS, when I select "Launch EFI Shell from filesystem device" it shows not found message.


What could be the reason and how to fix this matter?

A:Issue with Asus X550L UEFI settings

The EFI shell is something you don't normally have to invoke. It is probably not even set up to use.

The UEFI settings are accessed through the Bios. What exactly are you wanting to do with the UEFI settings?

Read other 9 answers
RELEVANCY SCORE 49.6

Hello community, I cannot change any settings in my UEFI on my B50-70 Notebook.The last thing I installed was ubuntu, now I wanted to install Windows 10 again.I cannot boot from any UEFI USB/CD/HDD anymore, it still has ubuntu as the only UEFI Boot entry.It says "cannot boot ubuntu" all the time, but It doesn't accept any changes to the boot order.Also removing the battery or the HDD doesn't change anything. It still wants to boot to the "ubuntu" boot entry.Loading default settings does nothing. All settings are like before after reboot.I still can boot in Legacy mode though, but I always need to hit enter to confirm the "cannot boot ubuntu" dialog.I have the lastest UEFI Firmware installed (3.04 or so). Now since I cannot change any settings or boot entries, I think the chip where all settings are saved is somehow burned in all the settings forever. I tried many EFI Boot sources, these work on all other notebooks/pcs, also they worked on this notebook before. Is there any way to read out which .efi file it has set for the entry "ubuntu" from a legacy booted OS? So I could make a workaround by placing the Windows bootloader to the same path with the same filename. Thanks in advance.

Read other answers
RELEVANCY SCORE 49.6

I want to change my 390mb dedicated to 3247 mb dedicated since,Hp claims it can go up to 3247mb dedicated. How do I get to BIOS and Change The video memory in BIOS????How do I know where to lokk?what keys to push?  HELP and please give the info and not refuse it. Thank you for your cooperation. http://www8.hp.com/h20195/v2/GetPDF.aspx/c05091586.pdf











Solved!
View Solution.

A:A-10 9600p video memory settings UEFI HELP

me-262 wrote: ..... How do I get to BIOS and Change The video memory in BIOS????Hi, No you can't, the system will work this out and assign/allocate available system RAM to video UP TO (means not dedicated) Regards.

Read other 2 answers
RELEVANCY SCORE 49.6

I have a Dell Precision Tower 5810 running Windows 8.1 Pro 64-bit
I created Rescue Media for the Macrium Reflect Free Imaging Software on a USB Flash Drive.
I can boot to that USB Flash Drive IF I can first boot into Windows 8.1 Pro 64-bit
But, the chances are that when I will need that Rescue Media, I probably will not be able to boot into Windows 8.1 Pro 64-bit.
I have tried to directly access the UEFI by pressing the F2 key at the Dell Logo after powering on the System.  I also tried F12.  Neither has worked.
Is there something different that needs to be done on a Dell Precision Tower 5810 running Windows 8.1 Pro 64-bit to directly access the UEFI & change the boot sequence when I cannot boot into Windows?

A:Accessing PC's UEFI Settings if I canNOT boot into Windows

Donald357,
Below are some links to help you with the UEFI settings.
Access UEFI (BIOS) System Setup from Windows 8 / 8.1
How to troubleshoot and reinstall the operating system on Precision Desktop Workstations

Read other 4 answers
RELEVANCY SCORE 49.6

Hi

Here is my situation:

I have upgraded a few days ago my daughter's PC from Windows 7 home premium to Windows 10 Home. The upgrade (a clean install) was done on a brand new SSD (Samsung 860 Evo 250gb). After the upgrade, I loaded several programs and created an image of my C: drive with Macrium reflect v7.2 free.

When I installed the Samsung Magician software I realized that AHCI mode was not activated. So I went into the UEFI and turned AHCI mode on. I saved and rebooted the PC. On reboot what I got was a blue screen of death (BSOD). In the process, I lost my Boot manager and had a hard time reboting. Now, everything is screwed up. Sometimes the PC boots and sometimes it does not. It is a mess. It is not reliable at all. When it boots though, everything works normally. Every time, I just do not know if I will be able to reboot or not.

I did not know that I should have enabled the AHCI mode in the BIOS (or UEFI if you prefer) BEFORE installing Windows 10.

To solve the problem, I am thinking of running a restore with Macrium Reflect as I have an image of the boot drive dated the day PRIOR to the day I changed the AHCI mode in the UEFI. BEFORE I restore, I want to change the UEFI setting of AHCI mode to ON.

My question is this:

Question 1
If I do just that, will it save my butt ? I mean not have to re-install everything.

Question 2
Will windows install the necessary drivers for the AHCI mode (after the image is restored) or will it turn AHCI mode back to IDE... Read more

Read other answers
RELEVANCY SCORE 48.8

For the installation process I want to enable the Vt-X.in windows10 but I con't do that because of there is no UEFI option .so what I do getting this option .

Read other answers
RELEVANCY SCORE 48.8

I'm trying to troubleshoot some problems my new Yoga 730 (81TC). Lenovo support documentation solution to change this in the UEFI/BIOS references 7th gen Intel processors, but this is 8th. How do I change the Security Level from SL1 to SL0?TIA!

Read other answers
RELEVANCY SCORE 48.8

We are now migrating from Windows 7 to Windows 10.With windows 7 we were running legacy BIOS. Now with Windows 10 it is UEFI and Secure Boot on all machines before deployment of operating system. I have configured the BIOS settings exactly as i wanted on one machine. (UEFI, Boot Order, Secure Boot Enabled)Then i have used CFGWIN.exe to export my settings to a txt file CFGWIN.exe /c /path:c:\settings.txt Now i want to use this configuration on all other Lenovo computers, without going in to BIOS and change all settings manually. So in my OS deployment i run:CFGWIN.exe /r /path:c:\settings.txt (after that i reboot the computers and continue with OS deployment) But BIOS are not set to UEFI, Secure Boot is still disabled? Please help!

A:Update BIOS settings LEGACY to UEFI (ThinkCentre M...

What version of BIOS are on?   Are all the computers on the same? 

Read other 1 answers
RELEVANCY SCORE 48.8

We are now migrating from Windows 7 to Windows 10.With windows 7 we were running legacy BIOS. Now with Windows 10 it is UEFI and Secure Boot on all machines before deployment of operating system. I have configured the BIOS settings exactly as i wanted on one machine. (UEFI, Boot Order, Secure Boot Enabled)Then i have used CFGWIN.exe to export my settings to a txt file CFGWIN.exe /c /path:c:\settings.txt Now i want to use this configuration on all other Lenovo computers, without going in to BIOS and change all settings manually. So in my OS deployment i run:CFGWIN.exe /r /path:c:\settings.txt (after that i reboot the computers and continue with OS deployment) But BIOS are not set to UEFI, Secure Boot is still disabled? Please help! Sorry Wrong Thread, how do i change?

Read other answers
RELEVANCY SCORE 48.8

I have Dell Inspiron 15R 5537,. i installed  Windows 8 and yesterday updated it inot window 10. Now my UEFI Firmware Settings" option is missing from the Windows advanced startup options. 

Is there a method or driver that allows for enabling the UEFI Firmware Settings menu entry? 

I'm even willing to reinstall the fresh Window agin, though I also can't seem to boot from CD/DVD at this point.
thanks for your reply.

Read other answers
RELEVANCY SCORE 48.8

I need to change my UEFI or legacy of HP pavilion 15 notebook laptop. pls help

A:in need settings procedure to change my UEFI boot order hp p...

Hi,  To change boot order, see this : Configuring the Boot Order in the System BIOS  Regards Visruth 

Read other 1 answers
RELEVANCY SCORE 48.8

I am having a perplexing issue after doing a clean install of Windows 8 on a 256GB SSD where I can not get into the "UEFI Firmware Settings" Tile in Advanced Options. Basically, when trying to enter the EFI/BIOS via: Settings in Charms / PC Settings / General / Advanced Startup / Restart Now / Troubleshoot / Advanced optons I do not see the "UEFI Firmware Settings" tile to get into the UEFI/BIOS!

My machine (which only has (1) hard drive) is an Asus N56VZ and came pre-installed with Windows 8 on the factory 750GB 7200rpm HDD. I cleanly reinstalled the OS on to a new 256GB SSD via an OEM copy on a disc and all seemed basically OK except that sometimes when getting to the Login screen it would freeze and the cursor would not be flashing, I could not enter my password nor shut down via the power icon on the bottom left of the screen. I would then have to hold down the power button to shut off the machine. This freezing of the login screen would be intermitent where most of the time I could enter my password but maybe 20% or so of the time I could not log in.

Due to that bug I decided to securely erase the SSD and once again reinstall Windows 8 and now I have this issue where in the Advanced Options menu there is only (5) tiles/options present and not the usual (6) as the "UEFI Firmware Settings" functionality is now missing!

Any help would be greatly appreciated!

Thanks!
...Glenn

A:UEFI Firmware Settings Tile not appearing after OS install

Did you install in UEFI mode & partition the drive for UEFI install?

UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

Read other 4 answers
RELEVANCY SCORE 48.8

So I have a 100-15iby that's out of warranty, so I decided to try Linux on it (works great, unless you leave it doing a distro upgrade overnight and a power outage happens and the battery dies, requiring a reinstall) So I go to re-install and I try and boot from the USB, and it says "Boot from USB <Verbatim Store-N-Go> has failed".  This raised an eyebrow, and I thought it might be a bad thumb stick, so I try another, a Kingston drive. I load up the boot menu and the option for USB says "EFI USB <Verbatim Store-N-Go>", which is weird because any other time I've tried to boot from this Kingston drive it said the name of the Drive next to the USB option. Tried to boot using Legacy mode, but that only brought up the UEFI boot menu, it was at this time that I noticed that the UEFI Bios isn't saving settings.  So I take the laptop apart, pop the CMOS battery out, hold the power button for 15 sec to hard-reset, then power on/off for good measure, put the battery back in, closed the laptop up and powered it back on. And the Settings were still there! GRRRR... It still boots into Windows fine, so I know the laptop is working, so at this point I'm thinking the CMOS battery is dead (which if this was the case, I should have been able to clear the settings, but no dice), or there's something wrong with the Bios or Mobo. I can't revert the Bios because the setting for allowing a reversion is disabled and can't be enabled to al... Read more

Read other answers
RELEVANCY SCORE 48.8

I have a Yoga 3 14 running Windows 10.  When I try to restart into EUFI Settings (following instructions http://zd.net/2fK7Zjw), machine boots up to a blank screen.  Computer is seemingly on (eg: cap lock button light and screen backlighting turn on and off), but nothing is visible on screen.  Powering off and on restarts computers successfully back to windows. Thanks for your help!

Read other answers
RELEVANCY SCORE 48.8

Nob question for you experts. After reading many threads about this UEFI stuff, i'm confused. I have a Asus Sabertooth z77 motherboard and will be fresh installing windows 8.1 full to Samsung 250gb ssd. I'm not quite getting what i'm supposed to configure on the MB for UEFI boot prior to installing the windows 8.1. Anyone please explain step by step as to what needs to done in the bios before I install windows please. Oh and I will be using the DVD disk to install.

A:UEFI settings for ASUS z77 prior to Clean install

   Tip
If you are installing Windows 7/8/10 from a USB flash drive in UEFI Boot Mode, then you need to have a UEFI Boot Mode compatible Windows 7/8/10 USB flash drive.

Here is more info: UEFI Boot Mode (installing using the GPT partition style) and Legacy BIOS Boot Mode (installing using the MBR partition style). -> link

Asus motherboard with UEFI firmware. How to install Windows 7/8/10 64-bit in UEFI Boot Mode.

You do not need to change the default UEFI firmware (BIOS) settings.

Note: You need to select to boot from the UEFI type (marked UEFI in the boot menu) if you want to install Windows 7/8/10 64-bit in UEFI Boot Mode (see screenshot below).

Note: You do not need to change the boot order of drives in your UEFI firmware settings.
- Connect your Windows 7/8/10 64-bit USB flash drive (Note: FAT32 file system) or insert your Windows 7/8/10 64-bit DVD.
- Restart the computer.
- Press the correct key to enter the boot menu (for example, Asus F8 and Gigabyte F12).
- Select to boot from the "UEFI: USB/DVD device name" (see screenshot below).

If you are booting from a Windows 7/8/10 64-bit USB flash drive in UEFI Boot Mode, then UEFI firmware run \efi\boot\bootx64.efi file. Note: This file does not exist by default in the Windows 7 installation media, so you need to create this file by using the Rufus program, if you want UEFI Boot Mode compatible Windows 7 64-bit USB flash drive.

If you are booting from a Windows 7/8/10 64-bit DVD in UEFI Boot ... Read more

Read other 3 answers
RELEVANCY SCORE 48.4

This is not really a question. I wrestled with this problem at a client site and wanted to share our findings with the community since I don't see the actual solution posted in an obvious place online and even HP support took a long time to help figure out the issue. Latest UEFI "BIOS" file at time of writing (6/11/2016) does not help either. My suggestion to HP would be to encode a clear INPUT FAILURE message when the 4 digit code has been rejected instead of what currently happens - the PC plays a tune and it seems like all is well but then you get the boot error listed below. ProbOn an HP with UEFI, settings revert back when trying to disable secure bootError msg - Selected boot image did not authenticate CauseNUMLock not being ON when system prompts for 4 digit code upon boot (causing code to be rejected)and/orFast boot is ENABLED Solution1 - DISABLE Fast BootAND2 - Either use the number keys or hit NUMLock and THEN use number padHP should show numbers entered, "sing" some audio, and then UEFI settings should stick *Remember that a USB stick must be formatted Fat32 to show as a boot option in UEFI unless you enable legacy boot options (assuming they are available)

Read other answers
RELEVANCY SCORE 48.4

Hello, I am not able to alter any variable (except Date) or boot from USB. Firmware update also not working. Disabling Secure Boot, Reset to Setup mode, Restore Factory keys or restore to factory defaults show no effect (after reboot settings are the same, efi dbx database still filled up). Tried also Windows EasyUEFI and Ubuntu efibootmgr.What is the correct solution to install and activate the EFI shell? In my opinion the EFI NVRAM is full or defect and the bos not able to handle it correctly or provide a solution for cleanup/fix.Any ideas? Best regardsPeter PS: would it work to Flash the SPI IC on the board in place without desoldering with my Miniprog?I can live with the situation but it is highly uncomfortable not being able to boot from USB stick. 

Read other answers
RELEVANCY SCORE 48.4

This is not really a question. I wrestled with this problem at a client site and wanted to share our findings with the community since I don't see the actual solution posted in an obvious place online and even HP support took a long time to help figure out the issue. Latest UEFI "BIOS" file at time of writing (6/11/2016) does not help either. My suggestion to HP would be to encode a clear INPUT FAILURE message when the 4 digit code has been rejected instead of what currently happens - the PC plays a tune and it seems like all is well but then you get the boot error listed below. ProbOn an HP with UEFI, settings revert back when trying to disable secure bootError msg - Selected boot image did not authenticate CauseNUMLock not being ON when system prompts for 4 digit code upon boot (causing code to be rejected)and/orFast boot is ENABLED Solution1 - DISABLE Fast BootAND2 - Either use the number keys or hit NUMLock and THEN use number padHP should show numbers entered, "sing" some audio, and then UEFI settings should stick *Remember that a USB stick must be formatted Fat32 to show as a boot option in UEFI unless you enable legacy boot options (assuming they are available)

Read other answers
RELEVANCY SCORE 48.4

Hi. I got my hands on an Ideapad Z710 with a broken LCD screen. 1. Does anybody know how to display the boot process on an external screen?2. Is it possible to find some documentation or manual over the UEFI/BIOS menues?  Best RegardsMats

Read other answers
RELEVANCY SCORE 47.2

Having problems installing Windows 7 Pro-SP1 from DVD computer with UEFI mode is enabled. Please see step by step as below for more detail:

I'm using Lenovo machine T530 with clean HDDGo to Bios and enabled UEFI only modeInsert Win7pro-SP1 DVD into optical driveWhen I run the Windows 7 disc I get past "windows is loading files..." and then freeze on "starting windows" just after I see 4 little colored balls in the center of the screen.

Notice: Please help me as soon as as possible. Thanks all everyone so much!

A:Window 7 hang up at Starting Windows" Screen while installing with UEFI mode

Hi,


You can check whether the following threads could help


Windows 7 Install Stuck at Setup is Starting.
http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/ea05aa7a-b536-4508-9d70-83bfc65b3ed6


Windows 7 Install Hangs at "Starting Windows" Screen
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/1ad56a84-c023-437e-8df1-229d4d11df75


Hope this helps.

Vincent Wang
TechNet Community Support

Read other 9 answers
RELEVANCY SCORE 44

Hi, Let me assume that a bios supervisor password is already set.I wonder how to change the Bios settings to a configuration which is suitable for Windows 10. (e.g. TPM 2.0/PTT enabled, UEFI enabled, Secure Boot enabled,  CSM disabled, Device Guard enabled, etc.)The change should be done with no user interaction at the system side. Therefore we are looking for a script or tool. So far I could find some pieces, e.g. that enabling "Secure Boot" using WMI will activate ?UEFI Only? mode in Bios, at least for ThinkPads; or the use of SRSETUPWIN to activate TPM2.0. But here the complication starts. The switching can only be done when the TPM 1.2 is not owned or active. I discovered that with powershell there should be options to reset the TPM, but I am not the programming guy and that is why my efforts were not successful. What I am missing is some kind of guide from Lenovo on how to achieve the challenges that will show up with a migration from Windows 7 to 10 in an enterprise environment. Some explaining scripts or guidelines which can be followed on implementing in e.g. SCCM. Hope you can offer some clues.Thanks in advance.

Read other answers
RELEVANCY SCORE 44

Hello,
When I press Restore Settings button in BIOS setting (through F2 when Dell logo is displayed at booting) then the dialog with two options is shown:

BIOS Defaults
Factory Settings

What is the difference about these two options (BIOS Defaults vs. Factory Settings) please?
Thank you.

Read other answers
RELEVANCY SCORE 44

I cannot seem to access the bios at all with windows 8.1 and my gtx 780 ti. When I connect the hdmi to my gtx 670, I can see the bios screen and can change the config but with the hdmi in my 780 ti I get a black screen until the dual boot windows selection. I've disable fast boot and have no idea what else to do.

A:No "uefi firmware settings" option on asrock z77 extreme 4

My guess is its defaulted back to another output on that card. I have three monitors on my GT 640. My BIOS splash screen and the Windows splash screen display on one monitor (DVI), and the Windows logon screen etc display on my main monitor (HDMI). It does the same thing whether I set Windows to single monitor or extend. I haven't tried it with just the HDMI monitor plugged in by itself though. Normally they should all go to the one monitor that's plugged in. If I get a chance latter on I'll unplug my two DVI monitors and see what happens. There is no guaranty that it will do what yours is doing but it will be interesting to see what happens just for future reference for me.

Read other 2 answers
RELEVANCY SCORE 44

Hi Guys
I restored an image created with Macrium Reflect on my wife's computer (Custom build with Asus P8Z77-V LX mother board) and everything went fine until rebooting when i got to the "Please press DEL or F2 to enter UEFI BIOS settings" then everything stopped.
I have tried F2 DEL F8 F12 just about all the F combinations and nothing works, I have two SSD drives one with Win7 Pro and one with Win10 Pro (not connected at the same time) and neither of them will boot up.
I have tried changing the jumper pins from 1 and 2 to 2 and 3 for 10 sec to clear the RTC Ram in CMOS then returned then to 1 and 2 and tried rebooting...no change so i removed the battery and repeated the jumper pin swap then reinstalled the battery and still no change, cannot get passed press DEL or F2 to access the BIOS settings.
I even downloaded the latest BIOS and updater as shown and put them on a USB flash drive together and tried the Macrium Rescue disk, and still nothing happened and it will not open the BIOS maybe i got it all wrong ?
I was hoping someone here might know how to put it right, i am out of idea's and any help would be greatly appreciated.

System Specs

Intel Core i7 3770K Ivy Bridge 3.5GHz 8MB
Motherboard Asus P8Z77-V LX LGA1155 ATX Motherboard
Memory G.Skill 8GB Kit (2x4GB) DDR3 Ripjaws X C9 1600MHz
Samsung 840 Series 120GB 2.5" 7mm SSD SATA3 530/130 x2 = 1 Win7 and 1 Win10
Storage Drive Western Digital Caviar Black WD2002FAEX 3.5" 2TB 64MB 7200RPM
Graphic... Read more

Read other answers
RELEVANCY SCORE 43.2

Ok this has been annoying me in every version of windows since win98 and Im hoping maybe someone can finnaly help me fix it. I am running winxp professional and view alot of folders though my computer view. I use the classic window style, each in a new window and NO folder tasks enabled. So basiccaly all the basic settings. I want each folder however to remmember its size. Occasionally and at random the folders go back to there "defualt" size and icons types. I cant just use the option to make all the windows the same cuz each one has a different setting that i wish to preserve. Is there any registry entry or hidden file i can back up to preserve these window, sizes, and icon view. Its a real pain changin it back all the time. Any help would be aprreciatied.
 

Read other answers
RELEVANCY SCORE 43.2

I am running Win 10, and trying to set a default in:

?Windows Settings, Personalization, Choose a fit, to the "Fill Selection".

When I set it, it goes back to ?Tile? all the time after a reboot or when waking up from sleep setting.

How can I make ?Fill Mode? the default so it doesn?t go back to ?Tile?.

It's got me baffled.

Can anyone help me. I would appreciate any suggestions.

Floyd
 

A:Window settings

Your directions to Fill Selection is missing something, Personalization does not directly lead to Choose a Fit ?
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hello, I have a Y720 tha comes with a 1x 129 GB M2 SSD and x1 HDD, in UEFI mode. I'm currently trying to replace the M2 SSD with a newly bougth Samsung 960 EVO M2 where I would like to install Windows 10 also in UEFI mode, as it has better power management than Legacy. But I have tried booting the Windows 10 installer USB stick and the laptop does not recognize in bios. I have created the usb stick with RUFUS 2.18 (latest), choosing UEFI + GPT and Fat32 file format. Before that I also tried restoring a system backup image I created from the former M2 using AOMEI Backupper but I couldn't boot the USB utility to do so either (the same happened: Bios does not recognise it, despite creating it choosing UEFI mode) Things I have tried: 1. Disabling secure boot (although the Secure Boot Status staed "Enabled", so I used the "REset Secure Boot mode" option too...)2. Chaging Optimal OS Setting to disabled in seetings, but still no use3. Using the Novo Button on the right part of the laptop. Of course, changing boot mode to Legacy would allow me to install Windows from USB ....but in Legacy mode, which I'm trying to avo So ...is there a way to boot a UEFI usb stick to install Windows in UEFI mode from it?  thanks!

Read other answers
RELEVANCY SCORE 42.8

What is UEFI Boot Source means and why some people disable this feature?

Regard,
Thanks.

Read other answers
RELEVANCY SCORE 42.8

Platform:
Windows 10 Pro
GA-X79-UD5 rev 1.0
E5-2670
40GB DDR3 Quad
512 SSD
GTX 1060

Scenario:
Upgraded Video Card from GTX 560 Ti to GTX 1060 Strix, machine boots but no video output or just black/blank screen.

Did a bit of online research and realize that two ways of fixing this
1. Change PCI setting to Legacy in BIOS/UEFI
2. Update to latest BIOS.

I decided to try and update BIOS to latest BETA (13w) using @bios from Windows. Everything went ok, reboots fine and still does now with Windows loading no problem, BUT i can't get to BIOS/UEFI???

All i get is the UEFI empty blue screen, no menus/options, just blank screen...

So i thought maybe i can reverse back to previous BIOS from windows but program wouldn't allow this. I tried sticking BIOS file in USB but the problem is i can't get to BIOS.

I Have tried running backup BIOS as board has two, but still same problem.
 

Read other answers
RELEVANCY SCORE 42.8

**** This issue has been resolved ****
**** Look at Page 4, posts 4 and 5 ****
**** You need to enable Legacy MBR by Enabling Launch CSM in the EFI Setup ****

Hello all,

This is my first post. I am a Windows 7 user and now (against my will) Windows 8.

I bought an ASUS N76 laptop pre-loaded with Windows 8 so these are the new generation n76 series. The old ones come with Windows 7. Anyway...

I attempted to boot a Windows 7 ULT 64 install DVD but the install hangs on the Windows logo/flag. So...

- Windows is loading files is shown and hidden
- The animated Windows logo appears and then it just hangs....go figure

I have no idea what is going wrong. I went into the UEFI setup and the only option for my BR is EUFI boot.

I also added a "boot option" asking the EFI to boot "efi\microsoft\boot\boot.efi" or "\efi\microsoft\boot\boot.efi" but when selected (from Boot Override), the screen goes blank for a few seconds, the BR starts spinning and I am thrown back at the EFI so it looks like it cannot find the file. For path, I selected the BR device and at the end has a "\".

I have secure boot disabled. (yep, I have an option for that). So now I am left empty handed and I am stuck with Windows 8. I even put in a brand new SSD hoping I would install W7 on it but I can't even start the setup!! Argh....

I am very experienced with MBR and BIOS but I am a complete newbie to UEFI. I don't know what is going wrong and why the setup hangs....Ther... Read more

A:Asus N76 UEFI - W7 64 Install Hangs on Logo (DVD UEFI Boot)

Win8 PC's have Secure BIOS which must be disabled to install any other oS, then you can install in UEFI mode following these steps: Downgrade Windows 8 to Windows 7

If you want to bypass UEFI and install normally to an MBR drive the procedure is related here: MS new "Secure Boot" locked BIOS arrives

Other info on EFI:
Technical Note: UEFI BIOS vs. Legacy BIOS - YouTube
The 30-year-long Reign of BIOS is Over: Why UEFI W... - Input Output

Read other 9 answers
RELEVANCY SCORE 42.8

Trying to understand handshaking between UEFI & Win 7. Have Win7 Pro sp1 64 installed on SSD, mb=Asus F2A85-V Pro. Example: boot to flashdrive to do Acronis backup of SSD; remove SDD, insert spinner; boot again to flashdrive to do Acronis restore to spinner (to test backup); remove flashdrive, boot to UEFI, set UEFI spinner as default, save & reset; spinner starts boot (#1), Win logo shows briefly, reboots (#2) and shows Win repair/normal screen; choose normal; Windows desktop shows; new driver is loaded for spinner and asks for reboot (that part I understand); reboot (#3) starts and again briefly shows Win logo before yet again rebooting (#4) to the Win repair/normal screen; again choose normal & all is happy. But then I remove the spinner, insert the SSD, and have to go through the whole deal again. Why so many reboots?

Similarly, if I change any hd/flashdrive configuration, my UEFI boot selection is lost & I have to reset it again - sometimes with the multiple reboot scenerio, sometimes not. Sure wish I could force that the UEFI selection stay there as long as the selected drive is installed.

A:UEFI boot keeps changing; UEFI/Win7 handshaking confusion

Hello and welcome diana look I am having a little difficulty in following the train of the thread.

Now do you mean you just backed up the SSD to a USB stick ? then tried to transfer that USB stick back up to the spinner? If it was just a back up then I don't think it is going to work because it is only a backup.

To make the spinner the boot device I would be cloning the SSD to the spinner. I wouldn't mucking around with sticks as I cannot see why that is necessary.

Read other 6 answers
RELEVANCY SCORE 42.8

The short answer to the headline?s question is that a UEFI scanner is all about helping you protect your computer against people who seek to take it over by abusing its Unified Extensible Firmware Interface (UEFI). A successful attack on a system?s UEFI can give the attacker complete control of that system, including persistence: the ability to secretly maintain unauthorized access to the machine despite rebooting and/or reformatting of the hard drive.

As you can imagine, this form of persistence is not a virtue and can prolong the pain and inconvenience of a malicious code infection. If your security software only scan drives and memory, without scanning UEFI, it is possible to think you have a clean machine when you don?t, that?s why we recommend a security solution that scans it, like ESET.

Why does my device have a UEFI?

Computing devices work by executing code: the instructions that we call software and which make the hardware ? such as a laptop or smartphone ? do something useful. Code can be fed to the device in several ways. For example, it can be read from storage on a disk, held in memory, or delivered via a network connection. But when you power on a digital device it has to start somewhere (bootstrap), and that first piece of code is typically stored in a chip on the device. This code, referred to as firmware, may include a ?power-on self-test? or POST to make sure things are working correctly, followed by the loading into memory of the basic in... Read more

A:Fighting persistent malware with a UEFI scanner, or ‘What’s it all about UEFI?”

Isn't it the same as Avast's Boot time scan?
Edit: No it's not
 

Read other 0 answers