Over 1 million tech questions and answers.

Inconsistent error warnings: Errors detected, yet no errors detected

Q: Inconsistent error warnings: Errors detected, yet no errors detected

My laptop has suddenly started running CHKDSK during startup. After it completes and finishes booting I go to Properties > Tools > Error Checking of my C drive and click ?Check?. It says errors were found on this drive and to repair drive now to prevent data loss. I click to run it, the system reboots, I see the prompt to cancel CHKDSK by pressing any key, let it run, the screen remains blank with just the little spinning dots. It finishes (in less than a minute, which is faster than it usually takes) and loads to desktop. I check the C drive properties again and it still says there are errors and to repair.

Running CHKDSK from CMD prompt I get ?Windows has scanned the file system and found no problems. No further action is required.? Running a 3rd-party disk checker (Disk Doctor, Tune-Up Utilities) also reports no errors. Yet the properties dialog continues to warn that there are errors.

I can?t be certain when this started. Just noticed this yesterday when I booted up (I don?t usually stick around and watch the computer boot). Windows has all the latest updates/patches. This is an HP ENVY laptop that came with Windows 10 pre-installed.

Anyone have any ideas?

Read other answers
Preferred Solution: Inconsistent error warnings: Errors detected, yet no errors detected

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


My computer was scanned by Error Guard and it detected 353 errors in my computer. And the truth is, my computer has been freezing, rebooting all by itself, and its really slow, so i know something is wrong with it. But i need to pay $30 to register Error Guard before I can use it to fix these problems.

What exactly is Error Guard?
Is there a free version of Error Guard that i can download?

Thanks for your help.

A:Error Guard detected 353 errors in my Computer

Try running 'SpyBot S&D' and fix all it finds.Do the same with Adaware. Half the time these payfor programs only fix minor stuff like deleting defunk short cuts etc. Let us know how you get on.

Read other 3 answers

After running sfc/scannow, no matter how many times I run it, I continuously receive the same error(s). sfc/scannow
Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.log windir\Logs\CBS\CBS.log. For example...Here is the portion of the CBS.log giving me the errors:2011-07-25 19:14:27, Info CSI 000002e4 [SR] Verify complete
2011-07-25 19:14:27, Info CSI 000002e5 [SR] Repairing 4 components
2011-07-25 19:14:27, Info CSI 000002e6 [SR] Beginning Verify and Repair transaction
2011-07-25 19:14:27, Info CSI 000002e7 [SR] Cannot repair member file [l:20{10}]"C_1140.NLS" of Microsoft-Windows-International-CodePage-1140, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2011-07-25 19:14:27, Info CSI 000002e8 [SR] Cannot repair member file [l:20{10}]"C_1047.NLS" of Microsoft-Windows-International-CodePage-1047, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file ... Read more

A:SFC/scannow - Errors Detected - But Unable to Fix

Welcome aboard You're not saying what are your computer problems.

Read other 8 answers

My 2-year old laptop keeps on freezing frequently even after I have downloaded all the suggested software and hardware updates, after cleaning the fan with compressed air, after BIOS update and after I formatted it. Extensive system and memory checks show no errors. It works smooty for the rest, but it is becoming impossible to use it and I don't know what else to try (the warrantee, of course, expired less than 2 months ago). Does anyone have a suggestion? Thanks!

Read other answers

In another thread
Mozilla firefox constantly crashes

It was suggested that i make a thread here to fix the errors in the DDS scan log that i have attached below. Any help will be much appreciated!!

Thanks for reading!

Read other answers

I did a hijack this scan. Please help me out! Thank you! The errors found by spybot are:

DSO Exploit

Thanks again.

Logfile of HijackThis v1.99.1
Scan saved at 1:55:45 PM, on 5/21/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\ewido\security suite\ewidoctrl.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Creative\SBAudigy2ZS\DVDAudio\CTDVDDET.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exe
C:\Program Files\Java\jre1.5.0_03\bin\jusched.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Trend Micro\Internet Security 14\pccguide.exe
C:\Program Files\Creative\MediaSource\RemoteControl\RCMan.EXE
C:\WINDOWS\sys... Read more

A:Critical errors detected by Spybot

Read other 16 answers

Hello, my parents computer will not allow any downloads of any item.  I have tried multiple browsers, safe mode, resetting IE11, etc.  I uninstalled McCaffe and tried downloading, no luck, tried getting rid of the infection with Norton and no luck.   The download will download everything up to 99%, then it "detects" a virus and the download fails. I'm not an expert but I can find my away around a computer with some instruction (unfortunately due to past issues lol).  Thanks for the help!  Ben
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 11.0.9600.16428
Run by Alley at 19:10:35 on 2014-02-10
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.4863.3021 [GMT -5:00]
AV: McAfee Anti-Virus and Anti-Spyware *Enabled/Updated* {ADA629C7-7F48-5689-624A-3B76997E0892}
SP: McAfee Anti-Virus and Anti-Spyware *Enabled/Updated* {16C7C823-5972-5907-58FA-0004E2F9422F}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: McAfee Firewall *Enabled* {959DA8E2-3527-57D1-4915-924367AD4FE9}
============== Running Processes ===============
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchos... Read more

A:Download errors- virus detected and deleted at 99%

Hello benhoff27 I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same... Read more

Read other 14 answers

Hello and thanks for being here.
I have a problem that started when I was trying to find a keycode for a game I already bought. (I had lost the box, thus no keycode) I know I shouldnt get progams like this, and trust me, I wont again.
As soon as I clicked it, I was nuked with spyware, a new background, etc, which all were promptly taken care of with my software Ad-Ware, Malwarebyte, and AVGs free AV. I thought I was clear. But now my Firefox keeps erroring out, and rendering itself useless, begging to be restarted. Ive swtiched to IE but I prefer Firefox.
Also, When I restart, I have a new set of malware that appear when I check it with Malwarebyte or Ad-Ware, no matter how much I cleaned it the time before.

I did the 5 but I had a little trouble with Panda (I thought it was going to do something after I Disinfected it) and IESpyad now uses ZoneOut and not sure how to use it. It gives me a list of sites but I dont know how to apply it.

Heres my beloved HJT File

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:10:58 PM, on 8/31/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16711)
Boot mode: Normal

Running processes:
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Windows\ehome\ehtray.... Read more

A:Firefox Errors, Malware detected Repeatedly

Bump Pls

Read other 2 answers

Hello Bleeping, i had some strange problems which i need help with...i didn't know how to start so i make screenshots to explaine my problems clearly....1st section : My problems.....1- Start menu problems:2- Control Panel problems:3-Display Properties proplem:4-Quick Launch problem:2nd Section : Steps been taken....1-Full Scans using: Kaspersky/MBAM/SbyBot S&D/Ad ware "with last database".... No thing was detected...3rd Section: Logs & Sys info1- XP/SP3 Os , with last updates....2-MBAM LOG:Malwarebytes' Anti-Malware 1.38Database version: 2410Windows 5.1.2600 Service Pack 311/07/2009 11:38:13 ???mbam-log-2009-07-11 (23-38-13).txtScan type: Full Scan (C:\|D:\|E:\|F:\|G:\|H:\|)Objects scanned: 261223Time elapsed: 1 hour(s), 1 minute(s), 51 second(s)Memory Processes Infected: 0Memory Modules Infected: 0Registry Keys Infected: 0Registry Values Infected: 0Registry Data Items Infected: 0Folders Infected: 0Files Infected: 0Memory Processes Infected:(No malicious items detected)Memory Modules Infected:(No malicious items detected)Registry Keys Infected:(No malicious items detected)Registry Values Infected:(No malicious items detected)Registry Data Items Infected:(No malicious items detected)Folders Infected:(No malicious items detected)Files Infected:(No malicious items detected)Case Not Solved Yet

A:Starnge Behavior,Multi errors,No virus detected...

Hello DevilsignPlease try this http://www.superantispyware.com/ and see what it finds Please post the log when finished. * Double-click SUPERAntiSypware.exe and use the default settings for installation. * An icon will be created on your desktop. Double-click that icon to launch the program. * If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.) * In the Main Menu, click the Preferences... button. * Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked. * Click the "Scanning Control" tab, and under Scanner Options, make sure the following are checked (leave all others unchecked): o Close browsers before scanning. o Scan for tracking cookies. o Terminate memory threats before quarantining. * Click the "Close" button to leave the control center screen and exit the program. * Do not run a scan just yet.Reboot your computer in "Safe Mode" using the F8 method. To do this, restart your computer and after hearing your computer beep once duri... Read more

Read other 5 answers

Hello, Need some help,Upon running Lenovo Solution Center scan, I received the error of "Failed, Hardware scan has detected one or more fails". Result Code: WHD01V01G-UL7AZL Waiting for some feedback. Have a nice day,Ricardo

Read other answers

So I ran scandisk this morning, the power was interupted during the check, when it came back it said scandisk had detected an error and was closing windows to prevent damage. It will repeats this message when I try safemode, or system restore... I have no Idea what to do.. I do not have an xp home cd(system) but I do have an xp pro cd...

what do I do??

A:Scandisck detected errors and closed windows. I cannot load xp.

Read other 7 answers

First of all, if this is in the wrong place, I'm so sorry!

Tonight I came to my computer(windows xp) to a new desktop saying;

"Warning! Spyware threat has been detected on your PC.

Your computer has several fatal errors due to spyware activity.

Your IP address is ##.##.##.### and via this address an unautorized access was gained by another computer. It is strongly recommended to install an antispyware software to close all security vulnerabilities."

I noticed it is actually a website put on my desktop, because I'll go change it, and it comes right back.

Also I get popups asking me to download an antispyware program(I can't remember the name but it will probably popup soon again).

I also get little warnings up from my start bar...

"Your security and privacy are at risk" (it went down before I could get it all typed!)
"Your computer is working slowly!" - and asks me to download something.
and others.

Oh and when I open my internet explorer, it has a different home page, but I checked and it still says "About:Blank" like I had it. It says;

"Possible spyware infection has been detected.

Click here to scan your PC for spyware, adware, trojans and viruses and remove them

from your computer. Full system scan is highly recommended by Windows Security Center.

Spyware is a software that performs certain behaviors such as advertising, collecting personal information,

or changing the configu... Read more

A:Warning! Spyware Threat Has Been Detected On Your Pc (and Additional Errors)

Hi. I had the same thing happen last night. I followed the directions listed at this site on removing malware. Everything says my computer is now virus free but my system alert warning constantly flashes and the pop up to download the spyware program keeps popping up. Are you having that problem too? Hope there's someone out there that can help us!

Read other 4 answers

Hi everyone, I'm pretty worried because recently I've been getting intermittent errors such as "Windows - System Error : Unknown Hard Error" and Event Log warnings and errors. I think something is wrong with my MFT but I'm not quite sure...I just got rid of a TDL3 rootkit infection but apparently it did it's job. Here is my thread on that: http://www.bleepingcomputer.com/forums/t/310183/yourprotectiontrojanjavaredirectpopup-saga/ I'm running an HP laptop with XP Pro SP3 on it. Let me know if you need more info. I've got about 45 of these warnings over the course of 15 minutes:Event Type: WarningEvent Source: NtfsEvent Category: NoneEvent ID: 50Date: 5/2/2010Time: 4:46:30 AMUser: N/AComputer: 1337B00KDescription:{Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.Data:0000: 00040004 00520002 00000000 800400320010: 00000000 c000009a 00000000 000000000020: 00000000 00000000 c000009a Here are a few other event errors and warnings I started getting:Event Type: ErrorEvent Source: SrvEvent Category: NoneEvent ID: 2019Date: 5/2/2010Time: 4:58:24 AMUser: N/AComputer: 1337B00KDescription:The server was unable to allocate from the system nonpaged pool because the pool was empty.Data:0000: 00040000 00540001 00000000 c00007e30010: 00000000 c000009a 00000000 000000000020: 00000000 00000000 00000002 Event Type: ErrorE... Read more

A:MANY event log errors and warnings (50,51,57,etc) Unknown Hard Error/NonPagedPool...

sounds like your harddrive is kicking off while the system is running.

did you try a scandisk /r

also check to see if hard drive power off is set for a time longer than system standby in your power managment setup

Read other 23 answers

Hi everyone, I'm pretty worried because recently I've been getting intermittent errors such as "Windows - System Error : Unknown Hard Error" and Event Log warnings and errors. I think something is wrong with my MFT but I'm not quite sure...I just got rid of a TDL3 rootkit infection but apparently it did it's job. I'm running an HP laptop with XP Pro SP3 on it. Let me know if you need more info. I've got about 45 of these warnings over the course of 15 minutes:

Event Type: Warning
Event Source: Ntfs
Event Category: None
Event ID: 50
Date: 5/2/2010
Time: 4:46:30 AM
User: N/A
Computer: 1337B00K
{Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.

0000: 00040004 00520002 00000000 80040032
0010: 00000000 c000009a 00000000 00000000
0020: 00000000 00000000 c000009a

Been having some of these as well:

Event Type: Error
Event Source: Srv
Event Category: None
Event ID: 2019
Date: 5/2/2010
Time: 4:58:24 AM
User: N/A
Computer: 1337B00K
The server was unable to allocate from the system nonpaged pool because the pool was empty.

0000: 00040000 00540001 00000000 c00007e3
0010: 00000000 c000009a 00000000 00000000
0020: 00000000 00000000 00000002

This next one has me worried about the health of my hard drive...the day before... Read more

A:MANY event log errors and warnings (50,51,57,etc) Unknown Hard Error/NonPagedPool...


I just got rid of a TDL3 rootkit infection but apparently it did it's job.

Did you have an expert give you a clean bill of health for your system here on this forum?

If not, I would advise you to Read this thoroughly making sure you follow all directions to the end. If you cannot complete any of the instructions, go onto the next.

kind regards,

Read other 11 answers

I'm getting the alert, "Windows detected a hard disk problem" and I'm advised to backup the computer. The computer is backed up, so what I want to do is run a chkdsk on the hard drive. When I try to do so on the C: drive I get the message, "Windows
can't check the disk while it's in use. Do you want to check for hard disk error the next time you start your computer?" I do select 'Schedule disk check', then restart the computer.

Nothing happens.
I've done this several time. I will say that I have a boot manager that allows me to select among operating systems at boot time, with the default being Windows 7. Could this be short-circuiting the chkdsk on restart? If so, is there some other way to accomplish
the check/repair?

Read other answers

Keyboard not detected, Mouse not detected. Fatal Error, System Halted.

That's what the system said, in DOS, on the black screen. Of course, I had my mouse and keyboard unplugged at the time, because I had just unplugged everything to move the computer.

Anyways, I plugged the keyboard and mouse in, restarted the computer, and everything started normally.

My question is, what is with this error? Vista can't boot up if I don't have a keyboard and mouse plugged in? It's not a big deal, but it seems like very odd behavior.

A:Keyboard not detected, Mouse not detected. Fatal Error, System Halted.

This has nothing to do with Vista whatsoever. As you said it showed up on the black screen with white text, which is the boot screen. The computer hasnt even started loading windows yet. The fatal eror occurs because you have no input device. The computer recognises this, and given that they are important, it puts a warning up that there is no connection.
It is completely normal, really, and whatever OS you have, its going to do the same thing.

Read other 1 answers

I'm getting blue screens when I play moderately to heavily intensive games on my laptop. The location listed in the minidumps has been inconsistent, but may be pointing to a driver. I have tried using Driver Verifier, but have been getting no results. The harddrive is new, and the memory is relatively new as well. The memory failed one MemCheck 86+ test once, but has passed everything since.

A:Inconsistent errors while playing games

Is Windows fully updated? If not do that.

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff9800064ce90, 0, fffff8000327176c, 0}

*** WARNING: Unable to verify timestamp for fbfmon.sys
*** ERROR: Module load completed but symbols could not be loaded for fbfmon.sys

Could not read faulting driver name
Probably caused by : fbfmon.sys ( fbfmon+330f )

Followup: MachineOwner
Uninstall the Lenova boot optimiser. This sort of bloatware is often the cause of BSOD's. Also consider running through this to clean out other bloatware:
Clean Up Factory Bloatware

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a0d28eb... Read more

Read other 2 answers

I wonder if someone might be able to help me with BSOD errors that I've been getting for the last 2 months. I've tried pretty much everything I can think of, and I'm having no luck figuring out what problem is.

The crashes are pretty random, constant, and the error codes (dump file attached), are inconsistent. Occasionally the comptuer will just freeze rather than BSOD, but that's not too frequent. I often get numerous crashes right when turning on the computer, but after 3-5 attempts, I can usually get it to fully boot, and stay on long enough to work on. But then it'll BSOD later.

The only thing I've noticed with the BlueScreenView results is that under the "caused by driver" category, I see ntoskrnl.exe more often than anything else. I've googled this, but haven't yet found any solution.

The Bug Check Strings are all over the place... nothing jumps out as being seen too often.

Sofar here is what I've tried.

Thoroughly scanned my computer for possible viruses or malaware - no issues found

Cleaned the dust out of my computer and fans - no improvement

Scanned my HD for bad sectors - no issues found

Installed all relevant windows updates - no improvement

Removed new USB 3.0 PCIe Expansion Card (this was the ony new hardware I added in the last

several months) - removing the card made no improvements

updated my video card driver - no improvement

updated my motherboard drivers - no improvement

ran memory tests - on the 2n... Read more

A:Inconsistent but frequent BSOD errors.

Anyone have ANY thoughts on how to approach fixing this?

Read other 9 answers

I have 40 Windows 7 machines in a single domain on a Server 2008R2. I have a handful of machines that are refusing to map to some individual folders on the server to which the credentials supplied have full access.  For example:
I have the following folders on my DATAPART1 (D:)
When I log in as an admin on one of these offending machines, I can map \\dc\shared\marketing   
but not    \\dc\shared\profiles.  I have full rights to both folders.  I also cannot map \\dc\shared.  I cannot find anything which prevents the folder mappings.  When I go to another
machine with my credentials, all mappings work fine.  But, when I login to a third machine, \dc\shared\profiles works, but \\dc\shared\marketing does not.
What would prevent a individual machine from mapping to a folder to which the user has full rights?  The machines that are having issues are consistent in the folders they refuse to map to. 

Read other answers

I can't seem to get Message Analyzer to capture network data. After clicking on "Start Local Trace"  I just get a bunch of "Windows_Kernel_Trace". And I get an error at the top that says "Modules Loaded: Errors or warnings
were found when loading modules". I'm not sure what the cause is, and what I need to do to fix this.  And this is what I get when I click on the show log button (I couldn't paste everything because it's too long, and this website won't take
it all)

6/1/2016 2:54:36 PM Information Cannot generate enum for map TCPIP_SLOW_PATH_REASON_ValueMap because it have different fields with same name
6/1/2016 2:54:36 PM Information Cannot generate enum for map TCPIP_SLOW_PATH_REASON_ValueMap because it have different fields with same name
6/1/2016 2:54:38 PM Progress Loaded cached module 'Windows_Kernel_Trace_ProcessTracking_2cc3d1b85397939c45061ef9388fb58e_4_0_7948_0.mdb'
6/1/2016 2:54:38 PM Information Module cache file doesn't exist: C:\Users\N5227\AppData\Local\Microsoft\MessageAnalyzer\CompilationCache\ExtendTCPIP_66747ecf79d16b47eac835c67c1f284b_4_0_7948_0.mdb
6/1/2016 2:54:38 PM Information Module cache file doesn't exist: C:\Users\N5227\AppData\Local\Microsoft\MessageAnalyzer\CompilationCache\ExtendTCPIP_66747ecf79d16b47eac835c67c1f284b_4_0_7948_0.mdb
6/1/2016 2:54:39 PM Error C:\Users\N5227\AppData\Local\Microsoft\MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEtwProcess\TCPIPComponentExt.opn(173... Read more

Read other answers


is there anyone able to tell me what these errors are from?


- DistributedCOM

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 

 and APPID 
 to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

- Schannel

A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 70. The Windows SChannel error state is 105.


- hcmon

1 - Detected unrecognized USB driver (\Driver\EtronXHCI).

2- Detected unrecognized USB driver (\Driver\pci).

Application error: (Logitech forum unable to provide an answer) the software continue on crashing; maybe related to the previous "hcmon" warnings? though the two events don't seem to be "time-related".

Faulting application name: LCore.exe, version:, time stamp: 0x543d6bf8
Faulting module name: Qt5Network.dll, version:, time stamp: 0x53695429
Exception code: 0xc0000005
Fault offset: 0x0000000000078280
Faulting process ID: 0x96c
Faulting application start time: 0x0... Read more

Read other answers

 I'm no computer guru but can anyone tell me in layman terms what's all of the errors and warnings about?MS identifies some of these but explanations mean nothing to me. I have a Netgear Modem/Router Mo 7550 issued by AT&T and in light of Netgear's security issues with their routersI'm kinda of gun-shy when I see reports like this. Thanks,Royg     

Read other answers

I have two problems concerning my two computers.
1- for many months, when i turn on my computer, it says on the black board "Warning! Insert Key Pressed or Clock Gen. Watch Dog Reset. Please enter then in Setup, and save the settings before exit!", and for me to continue, i have to press F1. and now it always verifies the consistence of the disk. what does this mean?

2- in some specific folders my portable computer has started to make errors, i don't know why. it just says something like: "explorer.exe has found an error and it is going to close" the problem is, my portable disk is making this error too, and it's urgent for me to save files there...

Read other answers

Hi, I hope someone could explain this to me, Im kind a worried i keep seeing this in my performance event log viewer. Im worried that it may damage my unit. My unit is Sattelite A305-S6905. Intel Core 2 Duo Processor T6400, 3GB SDRAM, 320 GB HDD. Is this the result of what Ive done these past days, I installed Vista Visual Master and change my boot screensaver, & my log in screen saver. I also Installed vidalia.exe even if i dont really know if there is a good benifit on it.Thanks in advance!

Warning 5/1/2009 8:56:05 PM Diagnostics-Performance 109 Boot Performance Monitoring
Warning 5/1/2009 8:56:05 PM Diagnostics-Performance 100 Boot Performance Monitoring
Warning 5/1/2009 8:56:04 PM Diagnostics-Performance 201 Shutdown Performance Monitoring
Warning 5/1/2009 8:56:04 PM Diagnostics-Performance 200 Shutdown Performance Monitoring
Warning 5/1/2009 5:49:52 PM Diagnostics-Performance 100 Boot Performance Monitoring
Warning 5/1/2009 5:49:51 PM Diagnostics-Performance 200 Shutdown Performance Monitoring
Warning 5/1/2009 5:34:24 PM Diagnostics-Performance 101 Boot Performance Monitoring
Error 5/1/2009 5:34:24 PM Diagnostics-Performance 100 Boot Performance Monitoring
Warning 5/1/2009 5:34:22 PM Diagnostics-Performance 200 Shutdown Performance Monitoring
Error 5/1/2009 5:11:52 PM Diagnostics-Performance 400 System Performance Monitoring
Warning 5/1/2009 5:08:08 PM Diagnostics-Performance 101 Boot Performance Monitoring
Warning 5/1/2009 5:08:08 PM Diagnostics-Performance 100 ... Read more

Read other answers

Hi All,

Would really appriciate any help I can get with the following!

I'm unable to open Outlook (2000) as I keep getting an error message everytime I try to open the program. The error message is:

"Errors have been detected in the file C:\Documents & Settings\my name\Local Settings\Application Data\Microsoft\Outlook\Outlook.pst. Quit Outlook and all enabled mail applications, and then use the Inbox Repair Tool (Scanpst.exe) to diagnose and repair erros in the file. For more information about the Inbox Repair Tool see Help"

(If I could open Outlook and "see Help" I would! )

The power went off in my flat last night....maybe this is a consequence? Anyways, any help is appriciated!

A:Outlook - "Errors have been detected...." Help please!

Read other 8 answers

My Windows 8.1 PC used to do a full Defender scan in about 8 minutes. A few days ago it wouldn't complete a scan after 13 hours, the progress bar was only like %3 done. I made a thread. Someone suggested scan in safe mode. I didn't do safe mode but I scanned again and after about 15 hours, it completed.
I Scan at least once a day and same with spybott. Spybot only ever finds Minor 'green' threats like cookies or browser history etc. Defender has never popped up or had a scan finish saying that anything was found.
But after this Defender scan finally finished, I checked (I think for the first time ever) the Detected Items list in it and found about 8 Sever 'Exploit" items. I should have written them down I guess but I just did Remove All. The Severe items said they were only from about 3 weeks to a week ago detected which is in line with how the scan was all of a sudden taking forever.
Should I worry about this?
I scanned again and as always, No Detected Items are found. the Detected Items list is also blank.

What else can I run like hijack this, malware bytes etc that won't interfere with Spybot and Defender? I have tried using as many scan tools as I can but there's always some stupid thing that makes one cause my main Defender protection to disable.
Hackers should be put in a dark cell forever.

Read other answers

Hi peoples!

As my subject line suggests, I'm having more than a couple of computer difficulties. When I start the computer, I get a screen freeze and have to press Ctrl,Alt,Del once before any programs will startup.
A lot of probs with internet connection and slowness while surfing as well as a lot of pop up ads in my face.
There are system boxes coming up with registry and dll errors and the whole system seems SLOW.

I use spybot regularly, but it doesn't seem to pick up everything??!
One error that comes up often is -
0x00404f94 Windows/System32/exploer.exe Application Error

So I pretty much have the works going on here!

If anyone is brave enough to give me a pointer or two then I would welcome any suggestions....
Here is the Hijack This log.......
Logfile of HijackThis v1.97.5
Scan saved at 4:15:42 PM, on 4/12/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\HighCriteria\TotalRecorder\TotRecSched.exe
C:\P... Read more

A:massive lags, error msgs, system errors, dlls registry errors...

Sorry but I don't see any antivirus software running there and you have a lot of virus/trojan type processes running.

You need to do an on-line scan to remove the problems and also think about installing one (AVG is good, and its free). Then post a log back once that is cleaned up.

Issues I refer to include these to show how bad it is:

O2 - BHO: (no name) - {00000010-6F7D-442C-93E3-4A4827C2E4C8} - (no file)
O2 - BHO: (no name) - {000020DD-C72E-4113-AF77-DD56626C6C42} - C:\WINDOWS\twaintec.dll
O2 - BHO: (no name) - {A3FDD654-A057-4971-9844-4ED8E67DBBB8} - C:\Program Files\SideFind\sfbho13.dll
O4 - HKLM\..\Run: [winini.exe] C:\WINDOWS\System32\winini.exe
O4 - HKLM\..\Run: [exploer.exe] C:\WINDOWS\System32\exploer.exe
O4 - HKLM\..\Run: [logon.exe] C:\WINDOWS\System32\logon.exe
O4 - HKLM\..\Run: [satmat] C:\WINDOWS\satmat.exe
O4 - HKLM\..\Run: [NvCplSystem] C:\WINDOWS\system.exe
O4 - HKLM\..\Run: [regdata.exe] C:\WINDOWS\system32\regdata.exe
O4 - HKLM\..\RunServices: [winini.exe] C:\WINDOWS\System32\winini.exe
O4 - HKLM\..\RunServices: [exploer.exe] C:\WINDOWS\System32\exploer.exe
O4 - HKLM\..\RunServices: [logon.exe] C:\WINDOWS\System32\logon.exe
O4 - HKLM\..\RunServices: [regdata.exe] C:\WINDOWS\system32\regdata.exe
O4 - HKCU\..\Run: [NDrv] C:\WINDOWS\System32\NDrv.exe
O4 - HKCU\..\RunServices: [exploer.exe] C:\WINDOWS\System32\exploer.exe
O4 - HKCU\..\RunServices: [winini.exe] C:\WINDO... Read more

Read other 3 answers

Hellow all you experts.

I just discovered while rummaging around Administrative Event area and found tons of errors, warnings plus others. The computer appears to work just find but this area still shows a lot of errors net.tcp, email and web sites work fine, I don't use an internal modem, my Internet access is cable with Cox.

Does anyone know of a Microsoft utility that can be used to fix these areas. I never had any problem with XP Pro in this same area was able to correct the errors, Windows 7 Pro does not appear as helpffull.

A:Windows 7 pro even errors-warnings

Would have to see the errors to give some direction here.
If you follow these steps here the file you are left with will contain a copy of your error log for us.

Read other 1 answers

Logfile of HijackThis v1.99.1Scan saved at 7:01:00 AM, on 6/26/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.5730.0011)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Analog Devices\Core\smax4pnp.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\WINDOWS\system32\igfxtray.exeC:\WINDOWS\system32\hkcmd.exeC:\WINDOWS\system32\igfxpers.exeC:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exeC:\WINDOWS\system32\igfxsrvc.exeC:\WINDOWS\system32\RunDll32.exeC:\Program Files\Java\jre1.6.0_01\bin\jusched.exeC:\PROGRA~1\Grisoft\AVG7\avgcc.exeC:\Documents and Settings\All Users\Application Data\jopkrcbs.exeC:\WINDOWS\system32\scchk32.exeC:\Program Files\MSN Messenger\MsnMsgr.ExeC:\WINDOWS\system32\ctfmon.exeC:\PROGRA~1\Grisoft\AVG7\avgamsvr.exeC:\PROGRA~1\Grisoft\AVG7\avgupsvc.exeC:\Program Files\Hewlett-Packard ... Read more

A:Log - Popups, Warnings, Errors

Hi jEnNyMe,Download combofix from here**Save it directly to your desktop**Double click on combofix.exe & follow the prompts.When finished, it shall produce a log for you. Post that log in your next replyWarning: Do not mouseclick combofix's window whilst it's running. That may cause it to stallA log will be produced that will ultimately be named C:\ComboFix.txt I'll need that in your next reply, along with a fresh HJT log

Read other 7 answers

Hi, this is my first time in here so please bear with me if I posted in wrong place, ty.

I have just reset my pc using win8 disc ( Fujitsu AH512 Laptop) and I did scannow under administrator , some files were missing but repaired itself, I went to view the event viewer in comp management and I have errors and warnings in there, is this normal after a reset and is it something I need to worry about now , also laptop seems to be running good, antivirus is ok, scans are ok the only thing that seems to be an issue is I downloaded comodo dragon but it wont open, it asks what do I want to open with then just re-downloads it ?, thank you in advance for any help or constructive comments .

A:Event Errors/Warnings

A lot of those "errors" one sees in event viewer are really just timeouts and such that are corrected or redone milliseconds later. The event viewer is there actually when trouble shooting a specific problem and actually meaningless for day to day checking.

If you want to see a well filtered view for programs and windows just go to Action Center and open Maintenance, then click "view reliability history", and it shows you program updates, crashes and response failures. If an error happens once or once in a Blue Moon, it's nothing to worry about. It's when they show up all the time that something needs to be done.

If something is giving constant errors/warnings then right click it>view details-and you get information on it, specially the Process ID, that is then used in Event Viewer to filter it an see when & how often this happens to help troubleshoot or post when you need help.

Too many people here look at Event Viewer(there is a reason it's hidden) and panic seeing all the errors(many of which happen because of specific user settings when windows wanted to something and can't or was interrupted). So don't worry unless you have a real problem.

I hope this helps.--Cliff

Read other 3 answers

Hey folks.
I suppose I should start by saying that I consider myself to have abouve averge computer skills in regards to OS, hardware and the. I also have below average typing skills.(superfast hunt and peck) I also know enough to know when to stop chasing files and ask someone else!
So heres the deal.I noticed a few days ago my system was acting quirky. "window exploer stopped working;Outlook has encountered anerrer..." things like that. Iknow my system fairly well(not great). I just started using x64 Home Premium like 6 mos ago. (Former XP Pro lover) Yeah I know, late bloomer. I use Malwarebytes, Defender, as well as Superantispy (on bootable CD with PE). Nice. Most of which I use every few days,if not more. None of which found any issues. My antivirus on the other hand seems to have detected, but says was unable to repair/quarrantine.
From Trend Micro internet security:

Possible_Hifrm-5C:\Users\JaderCo\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\4M11433N\505529[1].htm

The log files it had are no longer present.(No worries,I made a manual log before it dissappeared
There are a few other log files I saved as well, along with event viewer logs.
Sorry, but I didnt want to take liberties and post a loig without being asked for one. Seemed rude. But here are a fre of the errors I found, as well as some processes that I feel certain are NOT OS files or exe.
Warning: Event ID 1530 detected reg file in use bu another process...file w... Read more

A:errors, warnings and reg. leaks!

OK, so looking back at my post it does seem a little lacking in info. At least theres no typos...
I have been trying to narrow down what is writing to my disks, and robbing my memory.
This is what I've done so far, and what I found:
Disabled Machine Script Debugger.
Disabled indexing.
Remot access conn manager was using TONS of resources. I couldnt disable it in services(options were shaded out) But I managed to taskkill it.Not sure if the Perfmon events are relevant, seeing how resources are being vamped,but just to give a few:
Event 302
Event 351
Mostly stating usb drivers causing issues...?Oh, and I was able to open task manager. In the resource monitor, the image name is Taskmgr...the description is Acronis disk director. No clue there.
Localsystemnetworkrestricted (SVCHOST.exe is doing the majority of the read/write Its eve trying to write files to 2nd drive. Seems to be backup files, but I have auto backup off.
I just checked perfmon, and now LOTS of files being written to I:\ drive.
I'm leaning toward Trend being corrupt, and allowing an event to occur that triggered this mess. It says summary report for past 2 days 0 incidents. I just copied its log stating an infection this morning,so...yeah.
One process SFCTLCOM.exe description was to control all Trend functions. It now says TMPWF.exe controls all Trend functions.
Could Acronis be running somewhere doing this? An NTFS volume log is being written there. And the process snapman.exe is popping up a lot. Part of Acroni... Read more

Read other 1 answers

I think I have been the victim of some kind of scam from someone calling themselves logmein123.com.
I did not do any of the things suggested so I am pretty sure nothing has happened to the computer but the scam started by directing me to the errors and warnings displayed in COMPUTER MANAGEMENT>SYSTEM.
I was surprised to find about a dozen errors and about the same number of warnings.
Is this important?
If so what should I do about it?

A:Solved: Warnings and errors

Read other 16 answers

I just did a clean install of Home Premium but I'm STILL having performance problems. So I naturally go to the Event Viewer to check it out. I came up with a CRAAAZY amount of Warnings and Errors. (Snipping jpg attached). But what I need to know is how to fix all this stuff. Any help available???

Read other answers

[Edit] Apologies for spelling mistake in my post title. I don't think I can edit that...
Windows 7 Home Premium Service Pack 1, Automatic Updates (so I presume the system is up to date) running Avast Free antivirus (fully updated with latest definitions)
Hello - I hope someone might be able to help me. Several weeks ago I downloaded and installed what I thought was a legitimate program for driving a new digital microscope that I use for my work. I'm usually a very cautious browser, and only download from legitimate sites, but this time it looks like I goofed. The installer made the usual offers of adware, which I declined, but then went ahead and installed a bunch anyway. The immediate symptoms were attempted browser hijacks (some successful, some blocked by Avast). I cleaned up what I could manually (including uninstalling the digital microscope program), but there was at least one adware program that would not fully uninstall through add/remove programs. Over the next week or so I looked up what to do about it, and eventually ran through the malware removal guide listed here: https://www.reddit.com/r/techsupport/comments/33evdi/suggested_reading_official_malware_removal_guide/. The tools found a bunch of things (all apparently adware, nothing nasty) and removed them. After three cycles through the malware tools, everything was coming up clean (no reported threats/infections).
However, since that time, I get periodic Avast "threat detected" warnings (thi... Read more

A:Frequent Avast "Threat Detected" Warnings - No Infectionions Found

Follow up: I can now add RogueKiller to the list of programs run that report an apparently clean system.
Avast threat detections continue - a partial list is:

Read other 16 answers

Hello- All of a sudden I am getting unexplained warnings and errors in Event Viewer.

The warnings are Event ID 6000 and 1530. The errors are Event ID 8193. Please note attachments for Event

details. They appear to have something to do with 'GPClient', the Registry being in use, and

System Restore.

My AV appears to play into it. I uninstalled the avast! AV with the avast! Tool and did a further clean-up

with rejzor's tool as well- all done in safe mode. We then reinstalled avast!

We have searched for solutions to absolutely no avail. Please advise on this matter- any help will be greatly




Read other answers

The guts of my thread disappeared.. ugg..

I'm having issues with my laptop-- tons of things going on in the event viewer-- it's affecting me when I'm streaming video, video chat etc.. it's stuttering & sputtering as if something on the inside is taking up my resources and slowing me down to a stop. I have no idea what's causing it, but I'd like it to stop.
Lots of the tasks listed in the event viewer have Error & Warning icons associated with the line items. I have no idea how to fix this.. any and all help is appreciated!
Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 6075 Mb
Graphics Card: NVIDIA Quadro FX 880M, 1024 Mb
Hard Drives: C: Total - 286951 MB, Free - 190388 MB; Q: Total - 15999 MB, Free - 6064 MB;
Motherboard: LENOVO, 439123U
Antivirus: Windows Defender, Disabled

A:EVENT VIEWER - Warnings & Errors 13,311 of them!

Read other 10 answers

The telephone scammers ask you to look at all the errors and warnings etc. shown in Event Viewer to entice you to pay up to fix them but there is no real problem, is there? 
I see many are for not shutting down properly etc. but is there any concern for any of these errors and warnings?
Thanks for advice.

Read other answers

I'd hoped to resolve these myself but right off the bat I don't understand what to do or where to go.

This VSS one tells me to "check security on the volume" but I don't even know where to go to do that.

My Event Viewer is loaded with errors & warnings. Many people have said to ignore it for the most part but I am having a couple issues that I think could be resolved by going thru' some but I just get lost. I just don't know enough computer-eez (if there is such a word) to feel confident that I won't mess things up worse.

A:Event Viewer Errors & Warnings

Much to read here Event ID 12348
and here
Event ID 12348

Read other 9 answers

Yesterday I spent some time running all my utility programs, including doing a Norton virus scan, super anti-spyware scan, glary utilities and finally ad-aware 2008. It was late so I left ad-aware running the scan and checked on it in the morning. There were two minor issues it picked up so I cleaned those and logged off the computer. When I started it tonight, I began having massive issues in many programs. I ran all the utility programs again and they found a few minor things, but nothing major. Mozilla 3.0.04 runs fine EXCEPT it will not allow any file downloads. IE7 does not run at all and keeps trying to connect to a blank page after getting an error message (can't find my home page). When going to Help & Support, I get the following error "cannot find 'hcp://system/panels/Context.htm'. I also get an error message when opening Quicken 2009. I am attaching my HJ Log. Please let me know if you can help.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:13:48 AM, on 11/20/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C... Read more

A:Multiple Errors and Warnings in Various Programs

Well it has been a number of days so I wanted to give an update on what has transpired since I wrote this. I uninstalled IE7 and reinstalled it and that seemed to take care of most of my problems, including being able to download from Firefox, open email in Outlook and generally access most of my programs relying on web access.

My two remaining problems are that I can not open links in Outlook emails (General Failure error message) and I still can not access the Help & Support function. Most other problems have been resolved.

If from looking at the original log it appears I didn't have a virus than please let me know and I'll post on the other issues in another forum.

Read other 1 answers

i just found out about this event viewer and i have a 'few' questions!
under security i have numerous 'failure audit' the info section says the reason is unknown user name or a bad password~if this is talking about the windows PW you can change, i don't even have one on right now~anyway it lists system, my name, and anonomous~who is anonomous? my error list is crazy~i have success and failure all over~lol
i guess this is a terrible post because i don't even know how to ask my questions! i'm so confused~anonomous was one of the sucessful logons~am i being hacked?

A:event viewer errors & warnings

A trusted logon process has registered with the Local Security Authority.
Logon Process Name RASMAN

what is this? is it ok?

Read other 1 answers

Hi all,

I kindly require assistance with Warnings and Errors I get in event viewer, I know some of them are really minor but still if possible, I'd like to get rid of them.
I've attached the system event log file.

I don't do anything in particular to trigger them, they just accumulate with time.

Thanks in advance.

Read other answers


I am getting a lot of warnings and errors in Windows 7 (x64) Event Viewer

The errors are generally:

Failed extract of third-party root list from auto update cab at: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: The data is invalid.
The following boot-start or system-start driver(s) failed to load: EIO_XP

The warnings are usually related to DNS Client Events and usually have the format:

"Name resolution for the name sdmc.devicevm.com timed out after none of the configured DNS servers responded."

Sometimes a different address or IP address appears instead of smdc.devicevm.com (e.g. and others)

The EIO_XP driver appears to be associated with ASUS Smart Doctor which I do not have installed, I haven't been able to find anything more about it. Can anyone help me with these problems?


Read other answers

I've got a couple of error messages and warnings found in my Events Viewer that I don't really understand and want to get rid of it...If anyone could help, it'll be greatly appreciated.
First is in my Application :
Lots and lots of warnings about my MSiInstaller...
Reads: Detection of product 91120409-6000-11D3-8CFE-0150048383C9
feature "WORD" file failed during request for component
ERROR 1001
Next one..
reads the same but has "PRODUCT FILES" as the component...
ERROR 1004

Lastly is my SYSTEM log
Reads: Following boot-start or system drivers failed to load
SYMTDI Error 7026

and Symantec Network Proxy service terminated with service specific
error 4294967295 (0xsFFFFFFFF) Error 7024

I have no clue what that all means, but my events viewer is full of yellow signs and red crosses...HELP me get rid of them...
Please reply..

A:Errors and warnings in Event Viewer

Do you mean event log; I'm not sure-if so---here's a reference guide for what the events mean, if you are choosing not to use the event log's MS online support link... click on the xp link at this pagelink ;

Read other 1 answers

For the past month or so, I been experiencing the following on an HP Pavillion tx2000 notebook:

The system will simply shut down. It doesn't go to sleep or hibernate, it shuts itself down like a normal shutdown with the exception that it doesn't prompt to save any open work as Windows normally would if I initiated the shut down. All unsaved work is lost. There are no errors. No BSODs. When I reboot the system, it boots normally as if nothing had happened. I do not see anything exceptional in the Event log, but I'll admit that I am not exactly sure what I'd be looking for.

This happens after some period of inactivity. Sometimes after fifteen minutes, sometimes a half hour, but if I leave the thing unattended for any length of time, it will most certainly be shut down when I return. I've even seen it happen while I was in the middle of typing once! Prior to this happening, I could leave the machine running overnight without such problems.

I've gone through all of the power settings available and basically told it "never go to sleep or turn anything off under any circumstances!" I'm not sure what other settings I could change to prevent this. I've checked the cpu and other component temperatures using PC Wizard 2012 and CoreTemp and neither of them report anything exceptional (although this machine and several other HPs I have run notoriously hot). BIOS is up to date and BIOS diagnostics do not reveal any problems.

I'm thinking of just wiping the machine and loadin... Read more

A:System Just Shuts Down - No Errors/Warnings

Run a full anti virus scan
Download and run a full, updated scan with Malwarebytes, if negative
Lets try a small test. Boot up in safe mode, leave the computer on overnight and lets see if the problem happens.

You may also get a clue to the cause by going to the event viewer, after the problem occurs. Just go to search, by the start button, and type event viewer. In viewer go to administrative and look for critical and errors at the time of the shut down.

Read other 1 answers

While messing around trying to solve my problem in the post immediately below, I went into my Event Viewer and discovered 256 errors and warnings. I've had this computer 5 days. Is that an usually high number for 5 days of usage? Some of the errors are dated 3 months before I got the computer. Does this mean there were errors in the initial installations?

A:Event Viewer: How many errors and warnings are too many?

It depends a great deal on what the "errors" are. Some errors are pretty much meaningless. Other errors about services not starting and so on may be temporary with a later entry showing that the service did, in fact, start. If you are not having obvious problems with your machine, and you do not know what the entries in the log mean, save yourself the anxiety and don't read them, or find someone to read them that knows what they mean.

Read other 3 answers

Hi guys!

Its just been couple of days since I knew what the feature of "Event Viewer" is and I check Event Viewer for regular basis but now whenever I open Event Viewer and click on "Administrative Events" then it says "Query error" and the message is:
Log Error
Microsoft-Windows-GWX-ins/Debug The specified channel could not be found. Check channel configuration
Microsoft-Windows-GWX-ins/operational The specified channel could not be found. Check channel configuration

And apart from this I have several other warnings/errors But I want to fix this issue first so that I can post other errors. Thanks for your time guys! please reply if you have any idea about this! please! please!

Read other answers