Over 1 million tech questions and answers.

PCI compliance security analyser

Q: PCI compliance security analyser

Hi
What is a good PCI compliance security analyser primarily for Win 7 but also for later versions?
Thanks
Regards

Read other answers
RELEVANCY SCORE 200
Preferred Solution: PCI compliance security analyser

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 64

I have applied Microsoft security baseline to Windows 10 IoT.


Can anyone please provide a workaround or a solution to revert back the system to previous/original state?
(Any way which can basically revert the system + group policy + registry settings back to the way it was before applying security baselines)

PS: Microsoft compliance toolkit itself does not have this option which is why I have mention even a workaround would help if you know any.

Note: Just reversing GPO will not help. We will need to revert GPO + registry + (potential changes introduced by baseline).

Read other answers
RELEVANCY SCORE 60.8

Hi all - I'm having an error throughout many of the security and compliance pages in my instance - not getting too much help as yet so thought I'd post here. The errors I'm seeing are as follows:


error








The requested search root 'APCPR06A002.prod.outlook.com/ConfigurationUnits/XXXXXXXXXXXXXX.onmicrosoft.com/Configuration/Transport Settings/Rules/SafeAttachmentVersioned' is not within the scope
of this operation. Cannot perform searches outside the scope 'apcprd06.prod.outlook.com/Configuration/Services/Microsoft Exchange/ExchangeLabs'.








The requested search root 'APCPR06A002.prod.outlook.com/ConfigurationUnits/XXXXXXXXXXXX.onmicrosoft.com/Configuration/Transport Settings/Rules/AntiPhishVersioned' is not within the scope of this operation. Cannot
perform searches outside the scope 'apcprd06.prod.outlook.com/Configuration/Services/Microsoft Exchange/ExchangeLabs'.

The requested search root 'APCPR06A002.prod.outlook.com/ConfigurationUnits/XXXXXXXXX.onmicrosoft.com/Configuration/Transport Settings/Rules/SafeLinksVersioned'
is not within the scope of this operation. Cannot perform searches outside the scope 'apcprd06.prod.outlook.com/Configuration/Services/Microsoft Exchange/ExchangeLabs'.

Any thoughts?

Read other answers
RELEVANCY SCORE 57.2

Hello Friends,
I am trying to gather report with MBSA for Windows update from WSUS server, and getting this error.
 Windows Update Client failed to detect with error 0x80072efe.
Please help to resolve.

Regards
Amit




Amit Kumar

Read other answers
RELEVANCY SCORE 45.2

===========================================================================================================================
Log was analyzed using HijackThis Analyzer - Updated on 1/7/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfTray.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfAgent.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
O3 - Toolbar: McAfee VirusScan - {BA52B914-B692-46c4-B683-905236F6F655} - c:\progra~1\mcafee.com\vso\mcvsshl.dll
O4 - HKLM\..\Run: [VirusScan Online] "c:\PROGRA~1\mcafee.com\vso\mcvsshld.exe"
O4 - HKLM\..\Run: [MCUpdateExe] C:\PROGRA~1\mcafee.com\agent\mcupdate.exe
O4 - HKLM\..\Run: [VSOCheckTask] "c:\PROGRA~1\mcafee.com\vso\mcmnhdlr.exe" /checktask
O4 - HKLM\..\Run: [MPFExe] C:\PROGRA~1\McAfee.com\PERSON~1\MpfTray.exe
O4 - HKLM\..\Run: [SmcService] C:\PROGRA~1\Sygate\SPF\smc.exe -startgui
O23 - Service: McAfee.com McShield - Unknown - C:\Program Files\McAfee.com\VSO\mcshield.exe
O23 - Service: McAfee SecurityCenter Update Manager - McAfee, Inc - C:\PROGRA~1\McAfee.com\Agent\mcupdmgr.exe
O23 - Service: McAfee.com VirusScan Online Realtime Engine - Networks Associates Technology, Inc - c:\PROGRA~1\mcafee.com\vso\mcvsrte... Read more

A:HJT LOG Analyser used, thanks

Welcome to TSF.

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

Reboot into Safe Mode (hit F8 key until ... Read more

Read other 1 answers
RELEVANCY SCORE 44.8

Windows 2000 Professional -Popups, quick launch bar started, windows explorer started, changes in browser, and more. adware, spybot, cwshredder, hijack this, hyjack this analyser, housecall.trendmicro, norton AV 2005, spywareblaster, dillCompare, lspfix. and killbox have all been downloaded and ready to go. This is my last attempt to get this computer cleaned. I have been trying almost all the above to get the computer cleaned but it all keeps coming back. Please help...... I have run they Analyser and it was done according to the instructions. Can I send it?

A:Hijackthis Analyser

Hi smiliey, I thought this was posted in my forum also? I will close this thread.

Read other 1 answers
RELEVANCY SCORE 44.8

Theres a computer we have connected to our network in the office and its running alot slower than our other computers connected to it. So is there any kind of software (preferably free) that we can use to check the speed of it connected to our network?
 

A:Network analyser

http://www.speakeasy.net/speedtest/

This will test it's ability to download and upload some files - compare it to another box on your network.

Is it slower just on the internet or is it slower in general? If that is the case and it just started that usually indicates RAM is being eaten up by something, like say malware, spyware perhaps.
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hello,
Please help me get rid of the xlime popups and others on my PC. I have followed the instructions of before I post my log.
This is my hijack this analyser log. Please help!!! Thanks!!
===========================================================================================================================
Log was analyzed using HijackThis Analyzer - Updated on 1/3/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Common Files\Symantec Shared\Security Center\SymWSC.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
O2 - BHO: CNavExtBho Class - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [ccApp] "C:\Program Files\Common Files\Symantec Shared\ccApp.exe"
O4 - HKLM\..\Run: [ccRegVfy] "C:\Program Files\Common Files\Symantec Shared\ccRegVfy.exe"
O23 - Service: Symantec Event Manager - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
O23 - Service: Symantec Password Validation Service - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccPwdSvc.exe
O23 - Service: Norton AntiVirus Auto Protect Service - Symantec Corporation - ... Read more

A:Hijack this with analyser log.

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

If you have a fast internet connection (broadband), run an ... Read more

Read other 1 answers
RELEVANCY SCORE 44.8

I am facing lot of problem with speed of PC , It is taking hell of time to open the simple word file

just i would like to know by deleting history & index.dat would serve the purpose


while surfing i came to know about index.dat analyser (is this safe to use for win xp)

is there is any way to know & delete these hidden (black box) without using any third party software

A:index.dat analyser

Hi sspt, and welcome to TSF.

Tracking down all of your index.dat files is next to impossible. I would advise against this plan because of the risk of deleting files required to run your system.

Ccleaner is a tried and trusted program and very popular. Here is the link but watch out for the install options, if you don't untick the bottom box, it will install Yahoo toolbar, which i imagine you don't need!

Also, do not use the registry cleaner part of the program. Registry cleaners are not good
Quote:




If they work, you won't notice any difference, if they don't work, you end up with an expensive doorstop.




Ccleaner

Here is a link to some very good, reliable advice, right here at TSF.

Is your pc running slow?

Any more questions, please feel free to post back.

Read other 1 answers
RELEVANCY SCORE 44.8

I have a problem that I am lost on. I have run Ad-Aware and Spybot, which picked up several items that needed to be removed from my friends computer. The problem is this. I can access sites on the internet, but one site refuses to download the graphics for the site. I have confirmed through sources that the site is functional, but no matter what I try I cannot get this site to download and display the images. IE simply hangs trying to download em. Is there anything in this hijackthis log file that anybody can detect as being a problem.

====================================================================
Log was analyzed using KRC HijackThis Analyzer - Updated on 4/1/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\Program Files\Trend Micro\Internet Security\tmproxy.exe
C:\Program Files\Trend Micro\Internet Security\PccPfw.exe
C:\Program Files\Trend Micro\Internet Security\Tmntsrv.exe
C:\Program Files\Trend Micro\Internet Security\PCClient.EXE
C:\Program Files\Trend Micro\Internet Security\PCCGUIDE.EXE
C:\Program Files\Trend Micro\Internet Security\TMOAgent.exe
O4 - HKLM\..\Run: [TM Outbreak Agent] "C:\Program Files\Trend Micro\Internet Security\TMOAgent.exe" /run
O4 - HKLM\..\Run: [PCClient.exe] "C:\Program Files\Trend Micro\Internet Security\PCClient.exe"
O4 - HKLM\..\Run: [pccguide.exe] "C:\Program Files\Trend Micro\Internet Security\pccguide.exe"
O23 - Service: Tr... Read more

A:Hijack This Analyser Log.

Welcome to TSF moosmum

You need to uprade hijack this


First, create a folder for HijackThis in the root folder of your hard drive so it can make proper backups

example

C:/HJT/
C:/hijackthis/

next


Click here to download Hijack This. 1.99.1 Save it to the folder you have just created

Close all open windows and open HIJACK THIS. Click ?Scan? . When the scan is finished (it only takes a second), the scan button will change to?Save Log?. Click on?Save Log? and save it to NotePad. Copy the entire log and paste it here.

DO NOT FIX ANYTHING YET , most items that appear in the log are harmless or even needed. Wait for someone to analyze the scan and advise.

Lobos

Read other 1 answers
RELEVANCY SCORE 44.8

I haven't been hit by a virus, trojan, or spyware. My System is a mess because I have 70GB of space spread over 3 partitions on two drives, and I haven't been doing my housekeeping.

My system drive is nearly full, and I only have about 3GB in total left on my other partitions. It runs ok, just about, but I don't have enough space to defragment it now, and I can't seem to find anything I want, when I want it. It's time for a cleanup!

I'm looking for a program, having seen one before, that gives me an explorer like view of my disks, but shows both numerically and graphically which folders use what amount of space, including the system ones ("system volume information", for example).

I can't remember what it was called ow though, and this is one of those rare occasions where I could really use it.

Is there a freeware/shareware program that anyone could recommend?
 

A:Directory analyser?

That's the phrase I was looking for. "file manager" lmao.

I don't really have much need for them. but on this occasion, I'd like to try to follow the trail and see where I've been hiding all the junk.

I have resolved the extremely low space on my system drive for now though by deleting a memory.dmp file of 500 MB
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hiya guys, firstly, let me apologise as I have just sent you an email because I couldn't find the New Thread command! Success on my last attempt for the day. So, here is my predicament. I'm very inexperienced at most computer use so please forgive my confused dialogue. .
Reading through your site all day, following the instructions to clear some Farmmext problem. I downloaded the virus program you sent me to (forgot the name), selected all the criteria as written, ran it, no problems. Then after rebooting (I assume this is restarting the computer?), downloaded and ran HJT, saving the log in the same folder. This log is below. At this point I uninstalled the virus scan program you led me to, as I was told by a friend that you shouldn't run a computer with two virus programs at the same time. . Then, downloaded and ran HijackThisAnalyser, and at the 'yes' prompt, Norton warned me of a Bloodhound.Exploit.6 virus that wouldn't let HJTanalyser continue. Hence why there is no report from that procedure. Norton did quarantine bloodhound, but that does not seem to have made any difference, even when I tried to run the analyser again. Norton also sent me to Symantec where I was advised to download a patch (a newer version of outlook express) which would stop bloodhound from being a nuisance. Norton seems to think this is a high risk problem. This may seem elementary to you, but I am one very baffled person. If you think you can help, it would be much appreciated. Many th... Read more

A:HJT analyser vs Bloodhound

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that 'Display the contents of system folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

The Temp folders should be cleaned out periodically as installation programs and hijack programs leave a lot of junk there. Download CleanUp! (Alternate Link if main link don't work) and install it. You will use this later.

Reboot into Safe Mode (hit F8 key until menu shows up). Make sure to close any open browsers. Run a scan in HijackThis. Check each of the following a... Read more

Read other 4 answers
RELEVANCY SCORE 44

Hi,

I am looking for an application with which I can analyse which ports my ISP is blocking and which ones have priority over others. I'm looking for a freeware application pls.

Actually, my ISP gives me 32 up/64 down connection and I feel they give priority to common ports like 80, 25, 110 and they do not give priority to ports 5060, etc.

Any help would be highly appreciated.

Regards.
 

A:Port Priority Analyser

Have you asked them?
 

Read other 2 answers
RELEVANCY SCORE 44

I used the guidelines in the sticky and used HJT Analyser program to create the following log. It is not very long so I read the post by Microbell in this thread http://www.techsupportforum.com/showthread.php?t=27060 and followed procedure 1 to 5 using kill2me, pv, vx2finder,etc. and also came up with another sets of log. I am copying that at the bottom of HJT Analyser Log. Please help.

===========================================================================================================================
Log was analyzed using HijackThis Analyzer - Updated on 12/17/04
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\PROGRA~1\Grisoft\AVG6\avgserv.exe
C:\Program Files\Grisoft\AVG6\avgcc32.exe
C:\Program Files\SpywareGuard\sgmain.exe
C:\Program Files\SpywareGuard\sgbhp.exe

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




Logfile of HijackThis v1.99.0
Scan saved at 12:36:12, on 21/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\Software\Avant\HijackThis.exe

R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyOverride = local
O1 - Hosts: 69.20.16.183 auto.search.msn.com
O1 - Hosts: 69.20.16.183 search.netscape.com
O1 - Hosts: 69.20.16.183 ieautosearch
O1 - Hosts: 69.20.16.183 ieautosearch
O1 - Hosts: 69.20.16.183 ieautosea... Read more

A:HJT Analyser Log not very long but still having problems??

Welcome to TSF.

Didn't you post at KRC Forum also? Here is the fix:

Please print out the instructions here so that you can follow along more easily.

This is a new type of hijack and may take a couple of tries to remove it. If you have any questions during this process, please ask us (just don't reboot).

1. Run VX2Finder(126) again.

2. Run CleanUp! program and click on CleanUp button. Say NO when it asks you to reboot/logoff. Check your Downloaded Program Files folder for any program that you do not recongized and remove anything in question.

3. Delete the following files:

C:\WINDOWS\System32\guard.tmp <<< If it exists!
IEXPLORER.EXE
npvcbkpq.exe

4. Go to Start->Run and type in regedit and hit OK. Go to File->Export and save the registry somewhere as a backup. After that's done, go to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\ModuleUsage

Delete the whole ModuleUsage folder. Close Regedit.

5. Run KillBox now.
a) Click on the 'Delete on Reboot' button.
b) Check 'End Explorer Shell While Killing File.'

Copy and paste each of the following locations (one by one) into KillBox (check 'Unregister .dll Before Deleting' if it's not grayed out) and hit the X button for each one (when it asks you if you want to reboot, click NO):

C:\WINDOWS\system32\ijxwan.dll
C:\WINDOWS\system32\azaol1931.dll

6. On the reboot hit the F8 key (repeatedly until a menu shows up) to enter Safe Mode.

7... Read more

Read other 17 answers
RELEVANCY SCORE 44

seems to be readily available for 9x and XP - but can anyone recommend freeware/MS tool to examine where boot time is lost in 2000
 

Read other answers
RELEVANCY SCORE 44

Hi

My ISP is putting in place a 40GB per month download limit, Im not exactly sure how much I use at present as I watch a load of music videos, youtube clips, mp3s, mmorpgs games and general web surfing, is there a program that I can download that can monitor my usuage and report back to me how much I use?

I want to know if im within the limits before I change over to the new contract as I dont want to be cut off half way though the month!

Hope you can help.

Ta

A:Download Bandwidth Analyser

Usually an ISP provides a customer with access to this sort of information on their web site, using your account number.
So you don't get cut off half way thru the month.

Read other 4 answers
RELEVANCY SCORE 44

Firts time on here some please bare with me. i have multiple problems on my computer; mouse zooms in different direction to which you want it to go, trys to remove a program each time i start the machine, @ symbol has changed with " symbols and some others, so its a bit of a nightmare!!!

Hope you can help, here is my hijackthis log which has been analyser with hijackthis analyser, thanks cleggsy:

====================================================================
Log was analyzed using KRC HijackThis Analyzer - Updated on 9/28/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
O4 - HKLM\..\Run: [AVG7_CC] C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe /STARTUP
O4 - HKLM\..\Run: [AVG7_EMC] C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
O23 - Service: AVG7 Alert Manager Server (Avg7Alrt) - GRISOFT, s.r.o. - C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
O23 - Service: AVG7 Update Service (Avg7UpdSvc) - GRISOFT, s.r.o. - C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Logfile of HijackThis v1.99.1
Scan saved at 4:22:29 PM, on 10/15/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\PROGRA~1\BTBROA~1\SMARTB~1\BTHelpNotif... Read more

A:Hi-jack this analyser log - many problems?!?!

Hello and Welcome

Please subscribe to this thread to get immediate notification of fixes as soon as they are posted.

With regards to your keyboard issues, have you made any recent changes to your Regional & Language Options settings?

Please go to Control Panel > Regional & Language Options.
Under the Languages tab, select the details button.
Under settings, scroll down & ensure that you're using the US keyboard settings.


This webpage would not be available when you're carrying out the fix. Please save the following instructions in Notepad. I have customed my instructions on the assumption that you are using Notepad. It may lead to some confusion should you choose to do otherwise.

If there's anything that you don't understand, kindly ask your questions before proceeding with the fixes. There should not be any opened browsers when you are carrying out the procedures below.


IT IS IMPORTANT THAT YOU DON'T MISS A STEP & PERFORM EVERYTHING IN THE RIGHT ORDER.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


Click Start->Run - type SERVICES.MSC & then click on the OK button Locate the service - NetDDE Server (NetDDEsrv)
Double-click on it to open the Properties dialog. Under the General tab, note down the name of "Service name". We shall need it later.
Stop the service by using the Stop button.
Change the Startup type to Disabled & then click on t... Read more

Read other 19 answers
RELEVANCY SCORE 44

I looking to buy and install and SSD for my pc and need to shrink down my C: drive to clone. My C drive says it using 169GB but when i open up disk analyser program it only really adds up to about 70GB. If i look at the folders in my C drive it too only really adds up to about 70GB so where is all this other data? I want to buy a 60GB ssd drive and I have about 40GB worth of my own files which i can move but that still wont reduce the C; drive to around 60GB.

Any help would be appreciated.

Cheers

A:Disk Analyser doesn't add up

Downloaded tree size and found about 100GB worth of system restore files. Turned it off so they all get deleted and I'm gonna reduce the size it can use to about 1% of my 1TB HDD.

Read other 1 answers
RELEVANCY SCORE 44

Ive been getting these very annoying bsods... at random times blue screen view thinks its ntoskrnl.exe
But could u please fully analyse them for me? Thnx
Its not working to put the minidump in attachment I will try put the bsods in zip , Ok I uploaded it.
Here the dump files are:

A:Need a bsod analyser , Thnx.

We are seeing a continuous race of display driver driven BSODs, over two of the latest versions; 320.49 WHQL and 327.23 WHQL.

Install the latest 314.20 only and see if it works there or not. As you havent posted your query following the BSOD posting instructions, we cannot evaluate if that suggested version works for your system or not. Still follow those steps below:
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
During this process, accept all the suggested restarts.

Let us know how it is going there.

Read other 9 answers
RELEVANCY SCORE 44

OK, I keep getting these annoying pop ups from Cofidis and Mr Bookmaker and stuff. I ran my PC in safe mode with system restore off and all. Scanned with Ad aware SE before I restarted and then ran HJT. I then ran the HJT analyser and analysed the log, which I'm posting below. I know my problem has something to do with cxtpls.exe, which keeps coming back after numerous scans and all. Anyway, here is the log, I hope I did the proper way. Thx in advance for help, you devoutees!!

===========================================================================================================================
Log was analyzed using HijackThis Analyzer - Updated on 1/7/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\IWP\NPFMntor.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
O2 - BHO: NAV Helper - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O4 - HKLM\.... Read more

A:Analysed log with analyser and read FAQ. PLease Help

Hi and welcome to TSF.

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

The Temp folders should be cleane... Read more

Read other 6 answers
RELEVANCY SCORE 44

Greetings,
I have a USB3 card installed in my desktop but owing to troubles with Windows I've had to flatten the system which has also, obviously, lost me the drivers for it. Trouble is, I have no idea whatever on the make of the card. No doubt I could pull it and have a look, but this is a real PITA because of the location of the PC. Is there some software that will go and identify it for me?

A:Looking for free hardware analyser

I use this: HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools - which does much more than identify your hardware. Makes a great job of doing that, but also tells you temp's of everything in your system, fan speeds, peripherals, you name it.

There is also www.aida64.com - which is simply hardware ID. Have not used it myself, so not a personal recommendation, but a mate says he likes it.

Taking the card out may be a PITA, but if you cannot get the result you want from the above, it may be necessary. unplug it, remove it, uninstall any associated software. Switch off PC, replace card, switch on, let Windows find it as "Found New Hardware" and let windows install drivers.

Good luck, let us know how you get on.

Read other 3 answers
RELEVANCY SCORE 43.6

Dear Bleepingcomputers and friends,
 
I need you guys' help!
 
Have a  customer that need help getting PCI complaint [1] at five of her facilities.   So far I only have two thing left to figure out.  I only have available Window XP Pro sp3 machines to do this on. 
 
1)  I need to set up an internal IDS/IPS [2] scanner.   Antivirus doesn't count (PCI's insistence).  Wireshark?
 
2)  I need to set up an FIM [3] system on each computer with credit card information (PCI's doesn't care that the information is encrypted).  Again, Antivirus doesn't count (PCI insistence). 
 
 
 
Many thanks,
-T
 
1)  http://www.pcicomplianceguide.org/pcifaqs.php
 
2) Intrusion Detection System, Intrusion Preventions System
 
3) File Integrity Monitoring
 
 
 
 

A:need help with PCI compliance

price is everything in this question... Establish that and you can pretty much just Google it.
 
Also establishing training and user outlines/ skill-sets would be beneficial... As those XP machines could be nixxed and you could do it very cheap/free if they have decent users...

Read other 7 answers
RELEVANCY SCORE 43.2

Not sure if this is the correct forum for this question...
Recently had a PCI Compliance Scan performed which I failed for the following reason: "Firewall UDP Packet Source Port 53 Ruleset Bypass".  I am using Windows Firewall in Windows 7 Pro and the only place I can find any rule that specifies
port 53 is Core Networking DNS (UDP-Out).  I am not sure if I should disable this rule or not.  Or should I block port 53 in my wireless router?
Thanks in advance!

Read other answers
RELEVANCY SCORE 43.2

I am currently operating XP Pro 32 bit and Directx 9. In a few days I will be installing from scratch Vista Home premium 64 bit.

What I am not sure of is whether my CPU is compliant with Directx 10.

It is an Intel Pentium D 915.

I have searched Intels site for hours to no avail.

Does anyone have an answer for me please?

Regards

cogs06

A:Directx 10 Compliance

For DirectX 10 to work you need a graphics card that is capable eg ATI HD 2000 series or above

Vista is capable of running DirectX 9 and 10 so you wont need to upgrade your graphics card unless you want to use DirectX 10

Read other 10 answers
RELEVANCY SCORE 43.2

Hello,
We are using Windows 8.1 currently in a Fax Appliance. this used by medical and financial offices around the country.
We need to know if Windows 8.1 currently meets HIPAA standards for compliancy. We understand it is no longer in mainstream support, and exist now in a state of extended support and will be EOL by 2023. 
If this product does not meet HIPAA compliance standards we need to know now.
Thank you,
Ron.

Read other answers
RELEVANCY SCORE 43.2

Hello all,

while evaluating a new enterprise tool for our company a question was asked to the suppliers if their software is Vista compliant. One solution only requires a thin client with IE 5.5 or higher to use and say that they will not check if their software is Vista compliant as Vista uses IE 7 and they have tested with IE7 and Windows XP and it works fine.

Is there something that could prevent their software from working in Vista? Should we require them to certify Vista compliance?

BR Martin

Read other answers
RELEVANCY SCORE 43.2

Hello,
Can anybody tell me of a good company that provides information about Compliance management? Someone recommended the site "infolocktech"
Any recommendations on this?
_________________
Dual DVD Recorders Football News
 

Read other answers
RELEVANCY SCORE 43.2

Is there a plan to make MBSA Section 508 compliant (American with Disabilities Act)?

Read other answers
RELEVANCY SCORE 43.2

I purchased a usb type c spectre late last year (the rose version with i7 and 512GB.  It generally works well but so far the power system is very disappointing.  The basic issue is I purchased this device specifically because it purports to be USB Type C compliant.  That means I should be able to charge the device with any usb type c charger provided it meets the technical specs (e.g. 45 watts and so forth).  But it doesn't.  Instead, the software settings seem to make it in effect a proprietary set up.  If so, this is objectionable and possibly contrary Australian consumer law.  The problem is that I can only charge the device with the supplied charger.  The first issue is the charger is excessively heavy and bulky.  Why does the world's slimest and lightest laptop have such a bulky charger.  It's comparable to the laptop itself.  This is just dumb!The second issue is I can't use the rest of my USB Type C set up including a large battery, and a charger in my car.  Nor can I use my phone charger.  So I have to drag the HP charger everywhere.  The third issue is that only 1 of the 3 ports actually charges other devices at the USB Type C spec.  The 2 lighting ports are not USB Type C at all - they are just 3.1 with a usb type c connector.  So they only charge the phone at 20 per cent, the phone won't transfer data, and various peripherals such as a bluetooth keyboard/mouse don't have enough juice to... Read more

Read other answers
RELEVANCY SCORE 43.2

I'm working on a government project that includes using PowerPoint slideshows on the internet. If you're at all familiar with the government, you're aware that there is a MAJOR push to make sure all files on the internet are 508 compliant (accessible to users with disabilities.) I'm hearing from some folks that PowerPoint is NOT 508 compliant, while others say it can be MADE compliant. (In my digging around, I found a download that claims to walk you through making a PP slideshow compliant.)

Has anyone out there run into this situation? Have any suggestions?

Thanks in advance!
Terry
 

Read other answers
RELEVANCY SCORE 43.2

Here is my analyzer log :

====================================================================
Log was analyzed using KRC HijackThis Analyzer - Updated on 3/2/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\PROGRA~1\NORTON~1\navapw32.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
O2 - BHO: NAV Helper - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [NAV Agent] C:\PROGRA~1\NORTON~1\navapw32.exe
O4 - HKLM\..\Run: [Symantec NetDriver Monitor] C:\PROGRA~1\SYMNET~1\SNDMon.exe

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Logfile of HijackThis v1.98.2
Scan saved at 14:54:50, on 2005-03-06
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\MSN Apps\Updater\01.02.3000.1001\fr-ca\msnappau.exe
C:\WINDOWS\system32\P2P Networking\P2P Networking.exe
C:\WINDOWS\system32\wsxsvc\wsxsvc.exe
C:\WINDOWS\system32\vmss\vmss.exe
C:\WINDOWS\system32\certmgr8.exe
C:\WINDOWS\isrvs\desktop.exe
C:\Program Files\Control Kids\Control kids.exe
C:\WINDOWS\system32\cdrtc885.exe
C:\Program Files\Fichiers communs\Symantec Shared\Security Center\SymWSC.exe
C:\Program Files\LimeWire\LimeWire.exe
C:\Documents and Settings\Mel\Local Setti... Read more

A:HJT+analyser log : download trojan=isrvs\sysupd.dll

Hi chris and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

You may wish to Subscribe to this thread (Thread Tools) so that you are notified when a reply has been made.

Please be patient with me during this time.

Read other 8 answers
RELEVANCY SCORE 42.8

I work at a very small business with a newer credit card machine that is wired into a Netgear router with an Ethernet cable.

Credit card terminal runs thur no computer, it is hooked directly to the router.

I try to take care of all the IT concerns and problem when they come up.

The new PCI compliance rules that went into effect on Jan 31st 2018 are giving me real problems.

We have a static IP address which has not changed for about 4 years.
We always passed the PCI compliance scan done by a company called Trustwave.

For the pass 2 months we have failed the scans. The reason stated in the report is "Host not detected".

They (Trustwave) has told me that something in the router must be blocking the scan.

Basically they have been no help.

Does anyone know the solution to this problem?? I think that there must be thousands of small business with the same problem, as I tried to call Trustwave support but got only voice mail leave a call back number because of high call volume. I have been communicating with them only by email.

I am thinking that there must be a simple solution to this, but I have not found it yet.

If we passed the last 4 years and nothing on our end has changed then why can we not pass now.?

Makes no sense to me.

Anybody got any ideas ??? Should I call the bank that services the credit card machine ?

Thanks in advance for any help..................
 

Read other answers
RELEVANCY SCORE 42.8

Here's my situation. We have 4 systems that get remotely used. How ever we have been upgrading to be PCI-DSS compliant. We now need a way for these specific users to gain remote access to their desktops. Here are my thoughts but not sure which is best. So I'm just looking for your quick thoughts on this.

1. VPN that is PCI compliant. Then remote desktop from within the VPN. Would this still be PCI compliant? We have a Netgear FV338 router that is VPN pci compliant, but 60 bucks a client.

2. Use a 3rd party app such as go to my pc. That claims to be PCI compliant. I find these to vulnerable to changes in PCI compliancy. Will these actually pass our test?

I am just looking for options or if anyone has come across this situation?

Read other answers
RELEVANCY SCORE 42.8

Hopefully this is the right forum to post in..
I do IT work and am expanding into medical practices. I understand they must be HIPPA compliant and i was wondering if I need to be certified/take a test or anything to be able to even do IT work for a medical practice (third party IT). Some have said i need to have some certification to see the confidential patient information and I was wondering if any of you could maybe be more specific and show me what requirements they must meet or what certification I need to get to legally be able to work on their stuff, being I will be exposed to private patient information. 
 
Thanks

A:HIPPA Compliance/Certification?

No, there is no certification required.  However, you do need to be fully aware of the HIPAA laws and the security systems on the computer and any transference of data must be HIPAA compliant.
 
For more information, you can read these:
 
http://www.hhs.gov/ocr/privacy/hipaa/faq/securityrule/2003.html
 
http://www.hhs.gov/ocr/privacy/hipaa/understanding/
 
http://smallbusiness.chron.com/hipaa-certification-2810.html
 
Orange Blossom

Read other 4 answers
RELEVANCY SCORE 42.8

Hi Team.

I have a client with banking operations.

Long time send MBSA report about scanning servers to Regulatory Office.

There is documentary support about MBSA meet some Regulation, Process or Standard?

Thanks

Read other answers
RELEVANCY SCORE 42.8

Update: Installation successful, at the cost of one RAM module (remove from system), as suggested in this thread.
However, boot still fails with 2 modules in place.

Original Post:
Hello, my version of Windows 7 has failed to install, both at boot and within windows XP. The in-OS install failed, generically stating that it couldn't read the files it was looking for. (It REALLY needs a details tab for IT experts. It could have been my raid drivers, which seem to be running afoul in other OS's...s) The boot install didn't even start stating that my BIOS was not fully compatible with APCI.
However it is a feature-laden Gigabyte model from this year! There are no BIOS updates in regards to ACPI.

MA790TX-UD4P motherboard....

In my next installation attempt I will mount the ISO with Emulation and install from there, at least until restart.

Full system specs in my profile...

Edit: I've taken a look at this thread, I should note that I have no onboard video and only have access to an Nvidia 9800 GT with this motherboard.
I will attempt the removal of the 2nd DIMM as suggested on page 2.

A:ACPI Compliance Failure? REALLY?

Welcome SI5K,


Sounds like you have been reading some posts first, good start. Must give you a for having your system specs in place. I have found in several of my installs of Win7 that the Bios settings were rather confusing as to how ACPI was enabled or not. So I just made several attemps until I got the right one recognized by Win7 install. that's just one thought. What Build # of win7 are you installing? How did you burn the DVD? 4x speed? seems to work best for most members. You did not state how much memory you have, but you say you took 1 stick out & attempted an install.

No Over-clocking of CPU, right ?

We can start here & other members will jump in with their thoughts, also. Sounds like all the right hardware, just some minor bugs to configure correctly.

" Doc "

Read other 9 answers
RELEVANCY SCORE 42.8

Hi guys...an odd question here and I am mad at my IT Manager !!

Being a network Admin in-charge, i want to enforce a few policies at help desk. One of them is, not to create any user account unless an email arrives from HR to HelpDesk, informing of the user's badge ID, the department he/she belongs to. The status of employment and all those things. The procedures are in place but sometimes it so happens that some head of the Dept. call our IT Manager over the phone, or send him an email directly whcih is then forwarded to our Help Desk incharge who is then left with little options but to create the account without due processes.

HelpDesk incharge is bound by his position to defy IT manager and he is scared to tell me (sometimes he does) that IT manager is forcing him to dilute the AD account creation policy.

I don't want to confront IT manager based upon inputs by Helpdesk guys but would rather put a mechanism in place, where I would automatically come to know, that an account has been created and I can ask helpdesk to provide proof of the email from HR arbitrarily and then confront the manager.

I know some Audit trails can be put and they would appear under Securty tab of Event manager ( or so I guess) but I need something more automated that would land in my mailbox.

Is this possible?
 

Read other answers
RELEVANCY SCORE 42.8

What are the requirements for an existing application to be comaptible on Windows Vista RC1? How they are different from " Works with Windows Vista" requiremnts?

A:Requirements For Application Compliance.

I suspect that you'll have to contact Microsoft on MSDN to find that out. But, since Vista has gone RTM, I suspect they aren't very concerned with RC1 right now.

Read other 2 answers
RELEVANCY SCORE 42.8

Log was analyzed using KRC HijackThis Analyzer - Updated on 9/28/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
C:\Program Files\Spyware Doctor\swdoctor.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\DefWatch.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\Rtvscan.exe
O2 - BHO: PCTools Site Guard - {5C8B2A36-3DB1-42A4-A3CB-D426709BBFEB} - C:\PROGRA~1\SPYWAR~1\tools\iesdsg.dll
O2 - BHO: PCTools Browser Monitor - {B56A7D7D-6927-48C8-A975-17DF180C71AC} - C:\PROGRA~1\SPYWAR~1\tools\iesdpb.dll
O4 - HKLM\..\Run: [vptray] C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
O4 - HKCU\..\Run: [Spyware Doctor] "C:\Program Files\Spyware Doctor\swdoctor.exe" /Q
O9 - Extra button: Spyware Doctor - {2D663D1A-8670-49D9-A1A5-4C56B4E14E84} - C:\PROGRA~1\SPYWAR~1\tools\iesdpb.dll
O23 - Service: DefWatch - Symantec Corporation - C:\PROGRA~1\SYMANT~1\SYMANT~1\DefWatch.exe

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Logfile of HijackThis v1.99.1
Scan saved at 14:51:53, on 26/10/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Java\jre1.5.0_04\bin\jusched.exe
C:\Program Files\Lexmark X74-X75\lxbbbmgr.exe
C:\Program Files\Lexmark X74-X75\lxbbbmon.exe
C:\windows\system32\msqsearc.exe
C:\Program Files\eRoom 7\ERClient7.exe
C:\Lotus\Notes\ntmulti.exe
C:\Program Files\Spyware Doctor\sdhelp.exe... Read more

A:HJT Analyser log - pls review fore Safesearch and D Luca trojan

Hello and Welcome

Please subscribe to this thread to get immediate notification of fixes as soon as they are posted.

Before proceeding any further, please create a new directory - C:\PROGRAM FILES\HIJACKTHIS\
Re-locate your HijackThis files to the new directory


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


Please download these additional files/programs. Do not run them until instructed to do so.
Unless otherwise stated, they should be stored in same directory as the HiJackThis program.

CleanUp.exe - Install.

'UNPLUG'/DISCONNECT YOUR COMPUTER FROM THE INTERNET WHEN YOU HAVE FINISHED DOWNLOADING


Please save the following instructions in Notepad.

If there's anything that you don't understand, kindly ask your questions before proceeding with the fixes. There should not be any opened browsers when you are carrying out the procedures below.


IT IS IMPORTANT THAT YOU DON'T MISS A STEP & PERFORM EVERYTHING IN THE RIGHT ORDER.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


With HiJackThis & place a check next to these items and select "Fix checked":

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://g.msn.com.sg/0SEENSG/SAOS01
O4 - HKLM\..\Run: [dxvid] c:\windows\system32\dxvid.exe /nocomm
O4 - HKLM\..\Run: [msqsearc] c:\windows\system32\msqsearc.exe /install


* * * ... Read more

Read other 6 answers
RELEVANCY SCORE 42.8

<xmlns:texthelpns rwthpgen="1"></xmlns:texthelpns>Hi All,

This should be a really simple question and one that I should be able to find the answer for myself without posting here, unfortunately I can't. I would like to see raw IP addresses in the trace, not resolved ones. In Wireshark this is a doodle, you go to Preferences
-> Name resolution and untick what you do not want to resolve. I have been looking for 30 minutes now and can't find anything either in the menus, help of an Internet search.

Thanks

Chris

Read other answers
RELEVANCY SCORE 42.4

Hello everybody
I am newbie in message analyzer and trying to analyze and compare websocked and http1.1 and other protocols in my infrastructure. I tried to understand the message analyser but i need your help since i am beginner in this.

I am looking for a way to find out difference between bandwidth usage , handshaking speed , packet size ... during the transmigration. i would like to do this on local machine ( the server and client is on localhost ans send and receiving JSON by each other)
and in the next step I will do that in real infrastructure.
would you please let me know how can I do that in the best way ? it is appreciated to let me know which filtering or user should i use and how to make report from them.

Thank you

Read other answers
RELEVANCY SCORE 42.4

For the past few days my IE and OE is v slow. I ran Ad-aware, Spy-BOT. But to no avail. I read in this forum an advice to run Hijackthis and the Hijackthis analyser. I did that and attached below is the Results.txt. Can somebody assist in analysing this output ?

________________________
===========================================================================================================================
Log was analyzed using KRC HijackThis Analyzer - Updated on 1/12/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\WINDOWS\SYSTEM\ZONELABS\VSMON.EXE
C:\PROGRAM FILES\ZONEALARM\ZLCLIENT.EXE
O3 - Toolbar: McAfee VirusScan - {BA52B914-B692-46c4-B683-905236F6F655} - C:\PROGRAM FILES\MCAFEE.COM\VSO\MCVSSHL.DLL
O4 - HKLM\..\Run: [Zone Labs Client] "C:\Program Files\ZoneAlarm\zlclient.exe"
O4 - HKLM\..\RunServices: [TrueVector] C:\WINDOWS\SYSTEM\ZONELABS\VSMON.EXE -service

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Logfile of HijackThis v1.99.0
Scan saved at 10:53:24 PM, on 1/12/2005
Platform: Windows ME (Win9x 4.90.3000)
MSIE: Internet Explorer v5.50 (5.50.4134.0100)

Running processes:
D:\DOWNLOADS\TESCOBROADBAND\DRAGDIAG.EXE
C:\WINDOWS\SYSTEM\IENACLEN.EXE
C:\PROGRAM FILES\MOZILLAFIREFOX\FIREFOX.EXE
D:\CLEAN COMP\HJT\HIJACKTHIS.EXE

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = ... Read more

A:IE and Outlook Express v v slow - Hijackthis analyser output attached

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Go to Start->Settings->Control Panel and double-click on the System icon. On the Performance tab click File System. Click the Troubleshooting tab, and then check Disable System Restore. Click OK. Click Yes when you are prompted to restart Windows. When we have confirmed that your log file is clean, you may enable System Restore again by following the same steps as above ... Read more

Read other 1 answers
RELEVANCY SCORE 42.4

When you change the following registry value to "1", is FIPS enabled in realtime or does the machine need to be rebooted?

HKLM\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled

We require FIPS 140-2 compliance on all machines running WinZip. I was wondering if it was possible to enable FIPS when WinZip is opened. FIPS breaks several sites, applications, etc in our environment and trying to find the best way to be FIPS compliant so
that WinZip runs in FIPS mode. FIPS is not needed for anything other than WinZip at this point. Any suggestions?

Read other answers
RELEVANCY SCORE 42.4

(i was wondering if anyone has a list of all the hipaa guidelines for computers/networks/systems?

i've been trying to find a comprehensive list but all i can find online are legal documents. i'm looking for a list that i can use as a checklist.

like passwords must be this length and workstations must lock after so many minutes.

any assistance is greatly appreciated.

thank you. = ])
 

A:(hipaa compliance cheat sheet?)

Read other 6 answers
RELEVANCY SCORE 42.4

I am having a issue playing Blu Ray disks. I continue to get a HDCP compliance error everytime I try to play a Blu Ray video.  I am using arcsoft TMT6 on windows 7. I checked to make sure my monitor and video card are both HDCP compliant, and they both are. I used to be able to watch Blu Ray movies, and I'm not sure what changed, or why I cant watch them now. Also, I used cyberlink BluRay advisor and it said my "software player was not found" and "video connection type is digital without HDCP". Those are the only two problems found. I have a HP 2310 series wide lcd display and have a ATI Radeon HD 5570 video card, and am using a HDMI cable to the monitor. Can someone please help me with this. 

A:HDCP Compliance Issue, Everything is Compliant Though???

Hi Eric,   The Cyberlink BD Advisor only look for a Cyberlink BD software player.  You might very well have a perfectly good BD HDCP certified software player and Cyberlink won't indicate that you have it.  Your non-Cyberlink BD player might need updating to play the new BD titles.  The other issue might be a loose or faulty HDMI cable, a bad video card, corrupted video driver or a monitor problem. Power off the PC and monitor. Check the cables for tightness.  Be sure that you monitor has only one video connection and that it is a HDMI cable. Now try a monitor reset by unplugging the monitor's power cord and then hold down the power button for 30 seconds.  If you still have issues then try reinstalling the video card driver or installing the latest AMD driver from the AMD web site.

Read other 2 answers
RELEVANCY SCORE 42.4

Hi,

I have been trying to make my web pages 3WC / 4.01 compliant and viewable as much as possible across different browsers (albeit not perfectly)

I have been to http://AnyBrowser.Com and checked my pages in their site viewer. I have looked at the 3WC homepage and their markup Validation service at http://validator.w3.org/

Basically according to all the above, my pages look like crap and have heaps of errors.

I have located the online HTML Tidy service at:

http://cgi.w3.org/cgi-bin/tidy

I have used this HTML Tidy in combination with the Site Viewer at AnyBrowser.com and the Validator at 3WC.

After having reviewed and noted results of my existing pages in the Site Viewer and the Validator, I put my pages through the HTML Tidy, Copied the Page Source, pasted this into Dreamweaver and uploaded new pages.

I have put these new pages back through the Site Viewer and the Validator only to find that the pages are MUCH worse than they were before.

Even in the 3WC Validator the code entered by HTML Tidy is noted as errors (ex: Doc Type is replaced by Tidy code etc).

I can't understand why HTML Tidy would allow this to happen if it is indeed supposed to promote the 3WC compliance?

I am thinking that my only option at this point is to delete my HTML Tidy pages, go back to the originals and go through the errors listed in the 3WC Validator and manually fix them one by one...which (even with the error explanations handy) I am not sure that I can do properly (or indeed ... Read more

Read other answers