Over 1 million tech questions and answers.

BSOD when reaching windows screen after attempted driver installation

Q: BSOD when reaching windows screen after attempted driver installation

Ok so I was installing my drivers from the cd for my new motherboard and all was going well but then my mouse+keyboard cut out and the system crashed and now when ever I try to boot it and it gets right about to the windows screen this happens.
Any help would be nice
(Didn't uninstall old gigabyte drivers as i'm not sure where the unistaller/file locations are

RELEVANCY SCORE 200
Preferred Solution: BSOD when reaching windows screen after attempted driver installation

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD when reaching windows screen after attempted driver installation

Quick note I can get into the system if I boot in safemode if that helps at all.

Read other 3 answers
RELEVANCY SCORE 72.8

Over the past four days I've not been able to install the KB4022719 windows update on my Windows Ultimate 64bit laptop (Dell L702X). It repeatedly fails with the error 0x80004005.
From the WindowsUpdate.log file I can see:
2017-06-18 14:31:28:379
4976 1078
Handler Starting install of CBS update 907279C7-1F8B-4D90-A980-016CE24A2E5D
2017-06-18 14:31:28:675
4976 1078
Handler CBS package identity: Package_for_RollupFix~31bf3856ad364e35~amd64~~7601.23833.1.6
2017-06-18 14:31:28:675
4976 1078
Handler Installing express with source=C:\Windows\SoftwareDistribution\Download\a021ca4fd1e92e19406ed08979073a70, workingdir=C:\Windows\SoftwareDistribution\Download\a021ca4fd1e92e19406ed08979073a70
2017-06-18 14:31:33:340
1220 1bb0
Report REPORT EVENT: {281CEB78-700D-44C4-9B0D-E879E01FC150}
2017-06-18 14:31:28:332+0100 1
181 101
{4228CA7B-BF66-41F4-89BF-AC4C07C24CF7}
200 0 AutomaticUpdates
Success Content Install
Installation Started: Windows successfully started the following update: 2017-06 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4022719)
2017-06-18 14:31:54:010
4976 11c4
Handler FATAL: CBS called Error with 0x80004005, 
2017-06-18 14:31:54:010
4976 1078
Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80004005
2017-06-18 14:31:54:010
4976 1078
Handler :::::::::
2017-06-18 14:31:54:010
1220 10fc
AU >>##  RESUMED  ## AU: Installing update [UpdateId = {42... Read more

Read other answers
RELEVANCY SCORE 64

My friends PC had a few BSODs for some time now. She never bothered to try and resolve the issue, relying on her laptop instead. I though it was her security software (Norton) so i removed that and that BSOD went away. A few weeks later (first week in August, i think) it returned, but the PC wouldn't boot into normal mode without BSOD, only safe mode. I tried to update the bios in safe mode and when it got to the end of the update it just sat there without fully completing. I tried to close the update and suddenly...BSOD. Afterwards, I got a BSOD everytime i tried to boot into normal mode, and a BSOD everytime i tried to access the internet (using Chrome everytime) in Safe Mode. however, if i didn't try to get online and used the PC, it was just fine. I attempted a system restor, which was successful and as of today, my PC will boot into normal mode for about 5 minutes then BSOD; it will boot into Safe Mode and BSOD when I try to use Chrome but not when I use IE. That's all the info i can remember.

Just by the behavior of my PC only BSOD-ing in safe mode when i try to access chrome but not when i use IE, i think it's Chrome, but i wanted some expert help, just to be sure.

A:BSOD after attempted driver update; use of chrome trigger

Welcome to the Forum.
I would first suggest you remove Norton for testing purposes:

Code:
Start Menu\Programs\Norton Internet Security Public:Start Menu\Programs\Norton Internet Security Public
Start Menu\Programs\Norton Online Backup Public:Start Menu\Programs\Norton Online Backup Public
Use Revo Uninstaller Free to remove the software.Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems


   Information
Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software.

Microsoft Security Essentials & Malwarebytes Free.

Update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free


   Note
Do not start the trial version of MalwareBytes


You may also take a look at: Good & Free System Security Combination

Code:
Start Menu\Programs\PC Help & Tools Public:Start Menu\Programs\PC Help & Tools Public
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evide... Read more

Read other 3 answers
RELEVANCY SCORE 63.2

Hey everyone,

For ages, I've been having these issues of my laptop constantly freezing, crashing, programs not responding, etc. Well, I've finally decided to do something about it.

SPECS:
Device: HP Pavilion m6
Windows 7 x64
AMD A10-4600M Processor APU with Radeon 2.29GHz
RAM: 6GB
Available space on the C: drive: 330GB

The current problem: Windows will not start in normal mode. Upon entering the login screen, it will crash and enter a BDOS screen reading, "A device driver attempting to corrupt the system has been caught." I have been having problems with perpetual freezing for months now, but it has never gotten this bad before.
NOTE: Windows will run smoothly in safe mode, which is why I have narrowed the most probable cause to be a driver issue

Steps I have already taken:

-Ran CCleaner with no issues
-Defragged the disk with no issues
-Scanned for viruses with multiple antivirus programs (Vipre security, Malware bytes, and RogueKiller)
-Have gone into MSconfig and have disabled all startup programs and all startup services EXCEPT FOR MICROSOFT services
-I have attempted to do a system scan several times, but it would always get stuck at 64% of verification scan, even in safe mode
-I have checked the Event Viewer. The errors that appear at the time of the two most recent crashes are:
1. The DHCP Client service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error:
A device attached to the system... Read more

A:Constant freezing, BSOD driver has attempted to corrupt system

I read the dump files you posted. They all gave the same cause


Code:
tcpipreg
start end module name
fffff880`081e0000 fffff880`081f2000 tcpipreg (pdb symbols) c:\symcache\tcpipreg.pdb\2E2DF5F7FC39481BBAF303EBD91BB0721\tcpipreg.pdb
Loaded symbol image file: tcpipreg.sys
Mapped memory image file: c:\symcache\tcpipreg.sys\506C62BE12000\tcpipreg.sys
Image path: \SystemRoot\System32\drivers\tcpipreg.sys
Image name: tcpipreg.sys
Timestamp: Wed Oct 03 11:07:26 2012 (506C62BE)
CheckSum: 00010902
ImageSize: 00012000
File version: 6.1.7601.17964
Product version: 6.1.7601.17964
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 1.0 App
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft? Windows? Operating System
InternalName: tcpipreg.sys
OriginalFilename: tcpipreg.sys
ProductVersion: 6.1.7601.17964
FileVersion: 6.1.7601.17964 (win7sp1_gdr.121003-0333)
FileDescription: TCP/IP Registry Compatibility Driver
LegalCopyright: ? Microsoft Corporation. All rights reserved.
That is a Windows update driver - TCP/IP Registry Compatibility Driver

Read other 4 answers
RELEVANCY SCORE 62

Hi there,

For the record I am running Windows 7 Ultimate 64-bit in the event that helps.

So I booted up my computer today and I was greeted with the following desktop problem when I clicked the Start button: (The start button icon is modified)


No other editing programs are running, I do use Rainmeter but that was the first thing I ruled out.
I have already made sure that the start menu is not set to show previously opened documents or folders.

If anyone has an idea of how to fix this, your assistance would be greatly appreciated, I have simply never quite run into this problem before.

A:Windows 7 Start Menu reaching top of the screen

Hi there ... Read the Tutorial below ..

Start Menu - Change Height

Read other 3 answers
RELEVANCY SCORE 62

Hello 8 forums

I have encounter this problem twice. I install Warframe just now and everything was fine and I shutdown my PC and went for lunch. After that, when I boot up my computer , it was unable to boot to desktop and the blackscreen kept flicker. I did a system restore which I made in few months back. Any solution rather than system restore if it happen again? Thanks

ronghuang

A:Flicking of black screen on reaching windows

Warframe support--

https://www.warframe.com/login?destination=zendesk

They have a forum also.

Read other 3 answers
RELEVANCY SCORE 61.2

Hi, so I woke up this morning and turned on my pc and it turned on then went to a screen that said, turn on pc in: safe mode, safe mode with networking, start windows normally, etc.

So I clicked on all of them and the result was the same, It took me to the windows XP loading screen were the blue bar at the bottom would begin to load and then it would just restart, it has been doing this all day.

I have been googling this issue all day but I do not know what to do.

Originally I presumed my power supply might be at fault since it seemed to be making lots of noises the past 4 months.
I have read that faulty RAM could also be the issue, I am currently running memtest86.
I have heard of people reformatting and the problem persisted.

I just need some advice.

btw, this is posted from my other pc

A:Computer restarts after reaching Windows XP loading screen..

Not to be a messenger of doom, but i once saw a video on youtube about this exact problem. The poor guy had to replace his entire motherboard. I hope this isn't the cause of your problem, but it is a possible cause.

Read other 8 answers
RELEVANCY SCORE 60

Good morning.... I was using my computer, then I saw an Intel card driver update in Windows update. I clicked "install". After that, Windows screen became black and I can only movel the cursor. If I click the power button, the computer screen turns off, but When i click it again, there is the black screen again. Is there some way of switching it off and accessing the bios? (to install Windows again), or to solve this problem?. Thanks in advance for your help, technology is rebelling to me
 

A:Windows 10 black screen after driver installation

Insert your recovery disk and boot into safe mode then do a system restore.
 

Read other 8 answers
RELEVANCY SCORE 59.6

I recently Bought Nvidia QuadroFX 3450 (PCI E) , Installed it last night and Nvidia graphics Driver , Installation was fine and I started installing drivers , After I rebooted, I was brought Windows loading screen and then a black screen , I couldn't move my mouse after a few screen blinks it booted into the BSOD (error code 0x00000116) , The screenshot is below :

My Computer Specs are :

Windows : Windows 7 Enterprise SP1 - 64bit
Processor : Dual Core E5700 3.0GHZ
Motherboard : Intel DG41WV
RAM : 4GB
PSU : 420V

Once i Remove the Nvidia graphics driver from safe mode and restarts the windows starts working fine !!
I've reset CMOS and other things but no luck can anyone help me ??

A:BSOD After Nvidia driver installation - Can't log into windows

Anyone please ??

Read other 1 answers
RELEVANCY SCORE 58.8

Im installing windows xp and it seems hanging in the 34min remaining progress. What it seems to be wrong in the process on th 34min, i just cant get theough it. I think it is not really hanging because the HDD activity led in my PC is still flashing. Has anyone experience this....

thanks and more power.

A:Installation hangs upon reaching 34 mins remaining

How long have you let it go? What do you do when you think it has stopped, do you reboot?
Is this a format and fresh install or a Repair Install?

Read other 4 answers
RELEVANCY SCORE 57.2

Had my computer for around two years now, decided to restart it after being on for a couple days. Windows wanted to install updates, so of course I end up pressing shut down instead so it can. When I go to turn it on again, it gets to the point where it is loading Windows, sits there for about 15-20 seconds, and throws a BSOD at me. I restart and get the same result every time with the same exact error, whether I try to boot normally, the last good config, or in safe mode:

A problem has been detected and Windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:

*** STOP: 0x000000D1 (0x00000018, 0x00000002, 0x00000000, 0xF732D25F)

*** iaStor.sys - Address F732D25F base at F731E000, DateStamp 42b2df42Click to expand...

First stop was Dell's tech support website since, this being a Dell computer ... Read more

A:BSOD on attempted Windows load

Read other 6 answers
RELEVANCY SCORE 57.2

Had my computer for around two or three years now, decided to restart it after being on for a couple days. Windows wanted to install updates, so of course I end up pressing shut down instead so it can. When I go to turn it on again, it gets to the point where it is loading Windows, sits there for about 15-20 seconds, and throws a BSOD at me. I restart and get the same result every time with the same exact error, whether I try to boot normally, the last good config, or in safe mode:


Quote:




A problem has been detected and Windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:

*** STOP: 0x000000D1 (0x00000018, 0x00000002, 0x00000000, 0xF732D25F)

*** iaStor.sys - Address F732D25F base at F731E000, DateStamp 42b2df42




First stop was Dell's tech support... Read more

A:BSOD on attempted Windows load

That error is almost always a defective ram issue. If you have more than 1 stick of ram take one out and use process f elimination to find the bad one...remember to always use the very left memory slot.

Read other 19 answers
RELEVANCY SCORE 56.8

My laptop is is an HP ENVY m6 Notebook PC, serial code: CND3010HN6

Hello, the past couple of days whenever I have tried to login to my laptop I am presented with a blank gray screen. Here's how it typically goes down:

Turn on laptop using power button (after hard shut down)
Boot screen with HP logo on top and spinning dots on bottom happens
HP logo screen disapears and I am greeted with gray screen for about a minute
Gray screen is replaced by lock screen
Lift lock screen and login to account using password
I now have a gray screen that does not turn into the desktop
Here are some things that happen on the gray screen after login:

I can move my mouse and the cursor pops up and sometimes has the blue loading circle next to it
I can open the task menu by using CTRL + ALT + DELETE but cannot open task manager.
I cannot use any windows key commands (opening the metro screen, popping up the search bar on the side)
Before this happened I was installing a driver for a bluetooth adapter (my laptop does not have bluetooth built in) and had accidentally triggered a restart while it was installing. On the login screen there is an option to login using the bluetooth security tag (I don't know how to use this so I don't know if it will help.) it may also be worth noting that e laptop also has a fingerprint scanner but I don't know if that changes anything (I use that to log in most of the time.)

Thank you so much for reading my wall of text, I hope you can solve my... Read more

Read other answers
RELEVANCY SCORE 56.4

I was having some BSOD errors on windows 7 while gaming and after messing about with drivers and checking all hardware I came to the conclusion that a clean install of windows would be my best bet. So that's what I did, and after my clean install I have nothing on my PC other than a few drivers (the correct ones) and a handful of programs. I just experienced another BSOD which was System_Service_Exception and I am now at a loss as to what could be the problem. Would appreciate any help, thanks.

A:Windows 7 BSOD (Clean install attempted)

Hi,

Upgrade to Service Pack 1, by running Windows Update. Do you still have BSOD's then?

Regards,
Golden

Read other 1 answers
RELEVANCY SCORE 56

Hello and thank you for taking the time to read this.
 
I am having trouble with my computer. I am currently running Windows Vista 64-bit, service pack 2.
 
My computer was running fine last night and was even working normally when I turned it on this morning. The problem started when I started watching videos on YouTube; halfway through one of them my screen blacked out. It would intermittently pulse gray for a split second, then return to black. Ultimately, the computer blue-screened and I had to reset it. Upon booting back up, the computer seemed to be working normally again, so I gave it a few minutes and then started playing a video game (Mount & Blade: Warband, if knowing which is important). A couple minutes into the game my framerate crashed, giving me a new frame every 5 to 10 seconds. Several minuted after this started, my computer blue-screened again, forcing another reset.
 
This time the motherboard splash screen that first pops up upon startup was filled with graphical glitches/artifacts, and the boot information feed that comes up after that poured out a seemingly random sequence of numbers, letters, and other characters in place of the actual boot information. The computer got to the Windows loading screen before the monitor blacked out and the computer blue-screened again.
 
At this point the computer will start up fine in safe mode, but I will always blue-screen when attempting to boot in normal mode. I'm at a loss as to what the prob... Read more

A:Windows won't start normally (BSOD when attempted). Possible graphics issue.

I'd boot into safe mode...uninstall current graphics drivers via Device Manager...then reboot.
 
Reinstall graphics drivers from either Drivers Disk or download from website of manufacturer.  If OEM system...get drivers from system manufacturer's website and install from desktop..
 
Louis

Read other 3 answers
RELEVANCY SCORE 56

It started to occur randomly, I didn't install any new software or hardware.

A:BSOD on Windows 8.1 ATTEMPTED EXECUTE OF NOEXECUTE MEMORY

Hi shera & Welcome to the forums ^_^,

I am extremely sorry for the delayed response . There are very few BSOD analysts. Do you still need help with your problem? If yes, then kindly reply back to this topic and I would reply within 48 hours. Also, I would be notified via email once you post.
-Pranav

Read other 1 answers
RELEVANCY SCORE 55.6

Hello;
Running  Windows 7 service pack 1  I5 on an ASUS laptop
 
Doing a  "CLEAN BOOT"  for  Windows Repair ( All in One ) by TWEAKING.com.
After reboot  all I get is a blalnk screen.
Appearently during the set up for the "CLEAN  BOOT"  performed the disabling of processes in the wrong sequence result blank screen.
Any suggestions on how to recover ?.
Thanks
john

A:Blank screen - attempted clean boot (Windows Repair)

Did you allow Windows Repair to set a system restore point ??

Read other 3 answers
RELEVANCY SCORE 55.6

Hi, I'm having trouble with the screen on my Toshiba Satellite L775-S7352 when it reaches the Welcome screen on Windows 7 Home Premium 64 bit. This happens while reaching the Windows Welcome screen & sometimes it will reach the desktop before going fuzzy. It boots fine into Safe Mode.

https://www.youtube.com/watch?v=JpwnCvsN-G8

I've already checked the HDD and the Memory - they are fine... I've done a fresh install of Windows 7 Home Premium 64 bit from the manufacturer's recovery disks - the screen and everything else worked fine even through the first round of Windows Update (193 files) the machine rebooted after the updates and I checked for more updates. As soon as the installation of the second round of updates began the screen went buggy.

So I formatted the HDD and tried another reinstall - I successfully reinstalled the system and this time the screen went buggy trying to search for the first update for this reinstall...

Is this an issue with the screen or the GPU? any ideas?

Thanks,

Mike

A:Toshiba Satellite laptop has Fuzzy screen when reaching Welcome Screen

Hi first hook it up to an external monitor. does the external have the same problem?

Read other 9 answers
RELEVANCY SCORE 55.2

A few days ago my computer blue screened with some sort of memory error. When I attempted to start it back up, it began installing windows updates that I had been putting off. After it looked like it had mostly finished, it got to a screen that said "preparing to configure windows. Do not restart your computer". After sitting on that screen for about thirty seconds the computer rebooted, and then went back to that screen. After about 20 minutes of this, I decided that it probably wasn't going to fix itself.

Things I've tried:
Booting into safe mode (when I attempt to boot into safe mode I end up in the same loop)
There's a tutorial on this site about repair the registry hives, I followed it but It had no effect
I found a tutorial on another site that suggested using the dism took to revert pending installations. This also had no effect
I used a windows 7 install disk and a repair disk and have had no luck with them.
The automatic start up repair tool lists error "system file integrity check. Code: 0xa" or something similar

A:Infinite reboot loop after a BSoD and attempted windows updates

Hello Sk8kidamh,

That issue certainly doesn't sound good.

Can you just clarify that you cannot log into your computer, but you can get into options, such as system restore, command prompt, start-up repair?

If so, please open System Recovery Options (What are the system recovery options in Windows? - Windows Help) and select Command Prompt. When in Command Prompt, please type sfc /scannow and select enter.

Hopefully we can resolve this issue.

Thank you,
VinnyBuxton

Read other 9 answers
RELEVANCY SCORE 55.2

Alright, today I hibernated my computer (I usually hibernate) left it for an hour and attempted to turn it back on, now it loads fine but once it gets to the point where it should display the vista logo and then the log in screen the screen goes blank. The hard disk light is blinking fast so fast it's almost just staying on and the wireless does its blinking patterns as if it's redying the wireless connection but the screen remains black. I've tried safe mode, same result. Two screens, same result. I booted Ubuntu and it was fine so I'm using that now.

First of all, any insight into how I should go about fixing this?
If not, I have extremely important files on the hard drive is there any way you could recommend getting them back?

Thanks for any help, I'd hate to have to take it in and risk the guys at the store deciding it's easier just to wipe the hard drive or something.

A:Screen turns black before reaching the login screen

Are you using a Ubuntu Live CD, or are you dual booting?
If you're dual booting, you can access your ntfs partition from Ubuntu using steps listed on many many web sites: http://www.google.com/search?hl=en&q...earch&aq=f&oq=
Some are easier than others.

As for fixing your Vista. I have reservations because in some of my steps Vista has this nasty habit of overwriting the master boot record with its own without warning you (making you unable to boot into ubuntu if you dual boot), so research some more, and proceed with caution. If you boot into the Vista DVD, I think you can click repair, and you have a bunch of options and it looks like this:
http://neosmart.net/wiki/download/at...eryOptions.png
I haven't tried them in a while so I can't really recall what each does.
You can try going back using a restore point. Be VERY cautious with "Startup Repair". I think that's the one that rewrites the master boot record. (if you really need to try it, research how you can backup the master boot record in ubuntu, then restore it if needed - usually a flash drive, a floppy, or a bootable CD may be needed - you most likely would be able to do it from the live cd if you know the steps though).
And if all else fails, do a repair install. Can't recall how it's done, but there are many sites dedicated to that topic. You can also ask around the forum about it.

Read other 2 answers
RELEVANCY SCORE 54.4

Hey folks,

Recently I picked back up some of my old favorite PC games. One thing I noticed is that some games would take up nearly half of the allotted memory I gave to them. For example, I allowed Minecraft 2048MB of memory to use, and sometimes it ranged upwards of 70% or so in usage. To alleviate this issue, I went to the store and picked up 16 GB of RAM, hoping it'd run things faster and allowing me to store more on my desktop.

I swapped out the sticks of RAM I had in before and replaced them with the new sticks, but when I tried to turn back on my computer, it wouldn't turn on. So here's a list of things I tried or things I noticed:

- Checked the PSU, unplugged and replugged, checked to see if running on a wall outlet or extension cord mattered. Nothing really changed, computer wouldn't turn on.

- The first few times I tried turning it on, the power light would flick on, as well as the fans, but they'd sputter out within a second or two.

- Tried to reinstall the old RAM sticks, tried mixing-and-matching them in different ports in case one was faulty (I had 6 GB of RAM installed initially, only 4 was present on my desktop, so one port must be faulty, right?).

- Motherboard light was still on, not sure exactly what that means.

- Not only does my case's power button not turn on the computer, but the button that allows me to toggle the fan's red backlight is also not working. Does this mean there's a power issue related to the c... Read more

A:Attempted RAM Installation, Computer Won't Turn On

Read other 7 answers
RELEVANCY SCORE 54

Hi and let me thank you in advance for any help you can give me..My cpu is crashing an awful lot and freezing and just behaving erratically basically. I'm not an expert by far but i know something's a miss because i bought it new and up until a little while ago it was fine, now it's terrible. I have norton 360, spyware doctor, superantispyware, spybot s&d and i just d/l'd malwarebytes anti malware to see if i can get to the bottom of it but so far still no better. I am posting the hijackthis log for any kind sole to take a look at to see if you know what's wrong with it...
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:21:21, on 01/03/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18372)
Boot mode: Normal

Running processes:
C:\Windows\System32\smss.exe
C:\Windows\system32\csrss.exe
C:\Windows\system32\wininit.exe
C:\Windows\system32\csrss.exe
C:\Windows\system32\services.exe
C:\Windows\system32\lsass.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\winlogon.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe
C:\Windows\System32\svchost.exe
C:\Windows\System32\svchost.exe
C:\Windows\System32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\rundll32.exe
C:\Windows\system32\svchost.exe
C:\Windows\System32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\... Read more

A:BSOD - cpu usage reaching 100%.

Re: cpu usage reaching 100%..please help!!

That all looks normal.I see no problems there at all.I will move you to another forum and see if they can help.

Read other 35 answers
RELEVANCY SCORE 52.4

Hi, all. I'm in the middle of installing Windows 7 Pro x64, but it's giving me the message "Installing an unsigned 64-bit device driver is not supported and might result in an unstable Windows installation". This occurs after I click "Load Driver" and select my Rapid Storage Tech driver from my USB stick.

This is the driver I'm trying to install: Lenovo Support - Intel Rapid Storage Technology Driver Windows 7 (64-bit), Vista (64-bit) and XP (64-bit) - ThinkPad

I've even tried rebuilding my Windows 7 image in RT Seven Lite with the "Force Unsigned driver integration" checkbox checked. I still get the message after burning that ISO, and retrying the installation. How do I force unsigned driver installation?

A:[SOLVED] Unsigned Driver Installation During Windows 7 Installation

Nevermind, I just let the install finish as normal, and I haven't gotten any bluescreens. For future thread visitors, just make sure your SATA mode in the BIOS is set to "AHCI", and not "Compatibility", and you should be fine.

Read other 2 answers
RELEVANCY SCORE 52.4

Hi, i just recently bought a new computer which i had built myself, so far i have encountered my first problem within minutes, my computer does not show a splash screen or post screen when first turned on, it only comes up with a message asking about booting to cd/dvd drive, I have tryedto press delete to bring up BIOS but nothing happens. ive tried replugging most coords into the power supply into the hard drive, everything but nothing changes this message. I am really concerned i have a faulty part but trying to believe i dont, so if anyone knows how to fix this or potentially fix this please help.

my regards.
 

A:problems reaching BIOS and splash screen on my new computer

First of all, you need to post your exact parts ie make and model of mb, the exact cpu you installed, the exact ram, etc, etc, etc. Post links to your parts ie newegg links or wherever you bought the parts. We have no idea what we are working on so knowing helps.

Next have you read and followed the guide at the top of the forum for problem builds?
 

Read other 1 answers
RELEVANCY SCORE 52

As requested, I have made a new post containing the Performance run, and the System Dump files.

Also, I'm running Windows 7
32 bit
I originally had XP on my machine. Then a while back I switched to Windows 7 Ultimate, after that messed up, I went down to a version of Windows 7 Professional
I'm not entirely sure of the computer's age, but it's between 3 and 5 years
I installed the most current Operating System a few months ago
ACPI x86 Based PC
AMD Athlon 64 X2 Dual Core Processor 4200+ 2.21 GHz
Nvidia Geforce 8600 GT video card
Motherboard: ASUS M2N-SLI
Power Supply: Cooler Master eXtreme Power RP-600-PCAR 600W ATX from Factor 12V V2.01

I hope I did everything right... if not, tell me what I missed. Also, thanks again for your help on this

Also, the Performance Scan is in the .zip folder named PERFMON

A:Driver IRQL Blue Screen - BSOD [moved from Vista/ Windows 7]

Hi -

The particular version of Windows 7 would not be an issue. One problem I see is XP device drivers - you need Windows 7 device drivers even with x86.

Your USB wifi driver, Arcavir system protection and Trend Micro Internet Security are among the probable causes of the BSODs.

1. Update this Asus ATK0110 driver ASAP -

Code:
ASACPI.sys Thu Aug 12 22:52:52 2004 (411C2D04)
Asus Support --> ASUSTeK Computer Inc.-Support-

Slideshow is for Asus Cool 'n Quiet asio.sys update; scroll down at Asus site and look for ATK0110 - Asus mobo utility driver updates - Windows Live


2. These drivers must be updated -

Code:

nvm62x32.sys Fri Oct 17 17:00:39 2008 (48F8FCF7) - NVIDIA nForce Networking Controller
LUsbFilt.Sys Fri Feb 29 05:08:14 2008 (47C7D98E) - Logitech SetPoint USB Filter
WUSBGXP.sys Tue Mar 30 18:29:46 2004 (4069F4DA) - Cisco/ Linksys USB wifi

http://sysnative.com/0x1/DriverReference.html#nvm62x32.sys

http://sysnative.com/0x1/DriverReference.html#LUsbFilt.Sys

Cisco/ Linksys - Linksys by Cisco - WUSB54G Support

3. Remove Trend Micro Internet Security
4. Remove Arcavir system protection

Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Reboot after completion of each. Install MSE - http://www.microsoft.com/security_essentials/

See how things go after completing those 4 items.

If BSODs persist, run the Driver Verifier -- Driver Verifier - sysnative.com - MVP


Wi... Read more

Read other 5 answers
RELEVANCY SCORE 51.6

I completely uninstalled AMD Catalyst under Programs and Features, also I uninstall the driver from Device Manager and completely removed AMD files using Display Driver Uninstall in Safe Mode.

I have the same problem with this guy in this video: https://www.youtube.com/watch?v=-Dq7REmCgk0

Specs:

A10-7850k
F2A88XM-HD3
R9 270X

A:Black screen during AMD Driver installation.

There is no fix, if your GPU does not like that driver, you have to use a different version.
If you were trying to install 15.5, reverse back to 15.4 or to the latest stable version 14.12.

Read other 1 answers
RELEVANCY SCORE 51.6

Ok so my old vid card crapped out and I had to replace it. Np or so I thought. I bought the XFX Radeon HD 4650 (on the box it also says "AGP 8x" and "1GB DDR2").

I get the thing home, remove the old video card and it's drivers, then install the new one, and as soon as I install the drivers for the new card my computer won't start. It takes about 8-15 reboots in order to get past the black screen. I have uninstalled the drivers, cleaned them in safe mode, restarted again for good measure and then reinstalled the drivers from the disk. I have tried this same procedure several times, I have tried using the drivers from the XFX website, but according to them the card is too new and therefore the most recent drivers are not yet compatible with it.

I have a 450watt Mushkin PS, motherboard is an ASUS A7N8X2.0, Processor AMD Athlon XP 2800+ MMX 3D Now ~2.1GHz, 2048MB Ram, and I'm running Win XP Pro.

The place I bought the card from has replaced the card itself once, so I know that is not the problem. There is a message when you install the drivers from the disk that basically says it was never tested with windows and they don't know if it's all that stable...I have contacted XFX, they say the drivers are fine with windows.

So now here I sit, I have tried everything you can think of. When I bought this video card I made sure it was compatible with the motherboard because I know that my computer is a few years old (my ... Read more

A:Driver installation & Black screen?

Look on the motherboard manufacturer website to assure that you have the latest Chipset drivers... there are sometimes two for some Asus boards.
Describe how your old video card crapped out? Perhaps your motherboard is going to the happy hunting ground?
But I suspect the problem will be found in the motherboard manual at the ASUS site.
The big mystery: What did the place where you bought the card say when the second card didn't work either?: Did they not offer to give your money back?
 

Read other 6 answers
RELEVANCY SCORE 51.6

Greetings!
Am trying out an MSI NV 6800 video card and having problems. I can get the computer to boot in standard VGA mode but when I install nvidia drivers I get a black screen. Sometimes I can get the drivers installed but when I change resolutions the sreen goes black. Reboot gets me to win xp screen and then nothing. have to go to safe mode and uninstall. Any ideas??
 

A:Black screen after driver installation

Read other 16 answers
RELEVANCY SCORE 51.6

Hi, all. I've loaded a driver into my Windows 7 Pro x64 installation, but it's giving me the message "Installing an unsigned 64-bit device driver is not supported and might result in an unstable Windows installation".

This is the driver I'm trying to install: Lenovo Support - Intel Rapid Storage Technology Driver Windows 7 (64-bit), Vista (64-bit) and XP (64-bit) - ThinkPad

How do I force unsigned driver installation (without rebuilding my Windows 7 image in RT Seven Lite)?

A:Unsigned Driver Installation During Windows 7 Installation

Welcome to Windows Seven Forums.

You could try booting into Safe Mode (F8 on startup) where you can choose to force unsigned driver installs in Windows 64-bit.

I think you can also do it by changing Group Policy parameters: Disable Driver Signing in Windows 7

Read other 8 answers
RELEVANCY SCORE 51.2

i had tried formating removing hardware and refixing......installing updated version ...but still on install it shows bsod atikmpag.sys error....

the thing i did long back is i updated bios for windows 8( but my original version was win7 home basic that i got own buying my dell system)

later when i found software not supported by windows 8 i downgraded bios and now i xperiance this error on all os win7 and on 8 too..I cant now install any video driver on start up it shows error

i tried with bios many times still problem exist.....my laptop is dell n14110 with ati radeon graphics card 1 gb


help me fix this problem.....any tools to find



health report is nil still i couldnt attact...in my knowledge its all running good....

? OS - Windows 7
? x64 ?
? What was original installed OS on system?
windows 7 home basic
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?
windows 7 home basic
? Age of system (hardware) 3 years
? Age of OS installation - have you re-installed the OS?
recently

? CPU intel i3
? Video Card amd radeon hd
? MotherBoard dell
? Power Supply - brand & wattage dell charger

? System Manufacturer dell
? Exact model number (if laptop, check label on bottom) Dell INspiron 14r N4110

Laptop or Desktop?

A:BSOD error on on driver installation

There are not any .dmp files in the upload to look at.

This appears to be a dual video Intel/AMD laptop?

Install the Intel driver from the Dell support page first then the ATI/AMD driver from the Dell support page.

Use the latest Bios version it has all the previous updates and is backwards compatible to all supported OS's

Read other 5 answers
RELEVANCY SCORE 50.8

Hi everyone!
I need some help with my Windows 7 installation.
I've finally installed the RC build (7100 x64) on my Samsung SA11 notebook,
but after the installation of the latest nVidia drivers available for my card
I only get a black screen after I restart the PC. Any ideas?

A:9200M GS Black screen after driver installation

Hi avendiart and welcome to Se7en Forums

Is this the driver you've tried to install? GeForce Release 186

Read other 3 answers
RELEVANCY SCORE 50.8

My intel graphics driver is out of date, version 10.18.14.4414 and I attempted to update it using other guides found here, however when I go to install the newest version and restart my computer I have the same driver version as before.I used this guide and followed it step by step but i still have the same version.  http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-Envy-vdeo-drivers-are-way-out-of-da...

Read other answers
RELEVANCY SCORE 50.4

Hello,

I am currently building an image for work with all the drivers required to support all of our models. So far, i am able to properly inject all of the drivers and distribute the image without an issue, all except one driver.
Intel USB 3.0 EXtensible Host Controller driver. For some of the models, when installing the drivers automatic before windows loads, it stops with a BSOD.

I would like to have the driver installed automatic, but only if needed. As if the PC does a "Scan for Hardware Changes", notices it needs the drivers, then installs them from where i put them. Is this possible?

I can put the drivers on a desktop of the admin, and install them manually of course. It only takes a few seconds. However with the model in question, it requires these drivers to be installed before any of the usb ports work at all. I am forced to use PS2 keyboard and mouse , which is a problem with our KVM.

I would appreciate any advice at all, as i cannot find the answer to this particular issue in the forums.
Thank you!

Read other answers
RELEVANCY SCORE 50.4

My HP Pavilion notebook has an NVIDIA GeForce Go 6150 graphics card. I have not found a Windows 8 driver for this card, but at least two older Vista drivers that I have tried will run the card.

But after installing the display driver the boot sequence proceeds normally up to the lock screen (where password information is entered) which then appears blank. There is not a way to get past the blank lock screen, and the only way out is to uninstall the display driver. After uninstalling, the Microsoft Basic Display Adapter takes over again, the lock screen appears, and is not a problem once more.

I don't think the driver is directly responsible for this, as it seems to function normally. But something causes a hang at that screen. Possibly this is where the installed driver should have started but it is late in starting, so nothing is displayed?

Read other answers
RELEVANCY SCORE 50.4

It really sucks because it's a driver that, when not installed, causes me to crash all the time! Could someone please help? I've already tried disabling Windows Security Essentials' Real-Time Protection. I don't really know what else to do.
 

A:Solved: Driver installation screen gets stuck on Please Wait...

Have you tried it in Safe Mode?
 

Read other 3 answers
RELEVANCY SCORE 50.4

Hello, first off. Thank you for taking the time to read my thread. I appreciate it, and the fact that this forum exists.. To help dummies like myself.
 
Anyway, here's what I have so far. Been at it about two hours today, not getting anywhere. This desktop has been sitting in a corner for months, I recently reformatted it so I could use it again. Got just about everything updated, just this sound driver is killing me! I try to install my sound driver via the device manager, and it will crash just before the installation is complete. I've tried searching a bit, but i've run into dead links. That and leads to drivers that don't seem to match my sound card. I'm stumped. The PC is a dell optiplex 620, I've attached a link with the system service tag for more information. http://www.dell.com/support/home/us/en/04/product-support/servicetag/7hws1c1/drivers?DCP=DndTag&s=BSD
 
 
Need anything else? Keep me posted! Thanks again

A:Sound driver crashing(blue screen) upon installation

Hello,
give it a try with this driver:
http://downloads.dell.com/audio/R97809.EXE

Read other 3 answers
RELEVANCY SCORE 50.4

I just put together a new Gigabyte 2004 rz series mobo with an athalon 3000+ xp processor and a Xfx geforce 6600gt vid card. Got a gig of ram and started up perfectly first try. Problem is when i load the drivers for the video card, the screen looks like your psp when you threw it at a wall and some of the crystals died in the display. Pixels are missin on the screen and opening new windows just makes it worse. I unihnstalled the drivers and the screen looked crystal clear again. Being that i built the computer for World of Warcraft, i kinda need those drivers to be in place for it to work properly :/ please offer any advice you might have, thanks.
 

A:Screen pixalating only with driver installation on brand new computer

Are all system drivers installed?
Have dx9c installed?
 

Read other 4 answers
RELEVANCY SCORE 50

So for about 5 days, I have experienced random and sporadic BSoD, before that it was normal and stable. I did my installation on my OS on October 2011. I'm quite sure it's graphic driver but I've clean installed almost 10 times and still crashing. It crashes randomly when I opened a Youtube video or open a video file, everything regarding to video. I'm already feeling hopeless here

My specs are
Win 7 64 bit Home Premium (not OEM)
Gigabyte X58 UD3R
i7 920
Gigabyte GTX 480
Asus Xonar Essence STX
3x2 OCZ RAM 1033 Mhz
My OS is located on my SSD which is an intel 510 120 Gb
I got 1 Tb hard drive caviar green
I got 500 Gb hard drive caviar green
and 250 Gb seagate (really old, it's IDE iirc)

I've uploaded the minidump and system performance, I hope I did right on the attachment (first time posting here). Really appreciate your help, thank you.

A:Random BSoD even after clean graphic driver installation

  
Quote: Originally Posted by Humdidum


So for about 5 days, I have experienced random and sporadic BSoD, before that it was normal and stable. I did my installation on my OS on October 2011. I'm quite sure it's graphic driver but I've clean installed almost 10 times and still crashing. It crashes randomly when I opened a Youtube video or open a video file, everything regarding to video. I'm already feeling hopeless here

My specs are
Win 7 64 bit Home Premium (not OEM)
Gigabyte X58 UD3R
i7 920
Gigabyte GTX 480
Asus Xonar Essence STX
3x2 OCZ RAM 1033 Mhz
My OS is located on my SSD which is an intel 510 120 Gb
I got 1 Tb hard drive caviar green
I got 500 Gb hard drive caviar green
and 250 Gb seagate (really old, it's IDE iirc)

I've uploaded the minidump and system performance, I hope I did right on the attachment (first time posting here). Really appreciate your help, thank you.








Quote:
"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a &qu... Read more

Read other 2 answers
RELEVANCY SCORE 50

Hi All,

I have this system on which i install the Nvidia video driver and the system gives me a BSOD 0x00000116. Failure caused due to dxgkrnl.sys and
nvlddmkm.sys

I have installed windows 7 first on system and checked - Same Issue
Now I installed Windows Vista and still faces same issue.

Issue starts only after installing video driver.

After the BSOD comes up, i am unable to boot in windows normally and have to disable the video driver for me to boot in windows in the normal mode.

I work with Dell and this is my customer's system. Please Help me get this resolved.

Thanks in Advance !!!!

Aashiyana

A:BSOD 0x00000116 After Nvidia Video Driver installation

Info on the STOP 0x116 error message: http://www.sevenforums.com/crash-loc...eshooting.html

Read other 1 answers
RELEVANCY SCORE 50

Hi everyone,

This is such a great forum by the way - I haven't used it before but I've read a few posts and everyone seems so helpful! I'll try to make my situation as understandable as possible.

Firstly, the required specs:


Quote:




? Windows 7 (Ultimate I think)
? 64 bit
? Brand new computer. I installed XP. Then reformatted to install Win7.
? Full retail version
? ~3-4 years
? ~1-2 years
? Q6600 2.4Ghz overclocked to ~3.2Ghz
? nVidia 8800GTS 320mb
? Asus P5E x48 (I think) - with Rampage Formula drivers
? Antec TruPower (not sure) ~500W




Background:
Have always used my Razer Lachesis mouse (used to be on old XP firmware/driers)
And then I installed Windows 7 (and I probably updated to the latest Windows 7 drivers)
I recently decided to upgrade to the newest firmware/drivers from the official Razer Lachesis page.
The firmware installs fine.
Upon installation of the driver, I got a BSOD.
Upon restart, it said I had a corrupt file of a 3 letter (.sys file) which I forgot. Something like 'cng.sys' maybe. It booted up fine though using the recovered option.
The Razer Configurator software didn't install and there was no more Razer folder in Program Files (but there used to be).
So I believe the drivers didn't install.
I try again, and I keep getting BSOD with some dump where the number counts upwards.
So I'm pretty sure it's because of the new mouse driver I'm trying to install for my mouse. Not sure what's the conflict though. Any help muc... Read more

A:Razer Lachesis mouse driver installation causes BSOD

Yah, from the past two crashdumps (both dated April 5), it's definitely the mouse drivers (Lachesis.sys reported for both), and it's performing the same exact thing. I can't tell without a kernel dump what's actually going on, but whatever it did, it looks like it's corrupted the crashdumps as well (lots of information is zeroed).

Are you installing the correct drivers for it? You are installing the Windows 7 64-bit drivers, yes? I've noticed as well researching this that many other people are experiencing awful compatibility issues with 64-bit version of Vista and their Lachesis, and I'm feeling that this incompatibility has transferred over to Windows 7 as well.

Further inspection has me eyeballing a particular driver that kept unloading itself, thrice in each crashdump, that being LVUSBS64.sys. I know from research it's related to a USB Logitech device, most likely a webcam or speakers, but not entirely sure on that. You should determine this based on your own personal PC setup. Whatever Logitech item you have, you may wanna go into Device Manager and right click the device then click "Disable". Restart the PC. Then install the Lachesis drivers and restart as usual. If it still crashes, just simply consider the Lachesis as being incompatible to Windows 7 environment. Otherwise, it may very well be the Logitech device doing something funky and the Lachesis drivers have been left with the bag.

Read other 1 answers
RELEVANCY SCORE 50

Hello!

I installed WinXP new and now I have problems with my grafic, I think.
Oftern there comes a blue screen with a warning "IRQL_NOT_LESS_OR_EQUAL" or sometimes with a failure of a date called like a thing from my grafic card.
And sometimes my system just freezes.

Has anybody help?

A:Tecra 9000 - BSOD after display driver installation

Hi

BSOD is a result of serious software issue or hardware malfunction.
You said this BSOD appears after installation of graphic card driver.

First of all; did you install the right graphic driver?
Secondly; did you install the Win XP patches?

The Toshiba driver page provides some Win XP drivers for this notebook model?
The drivers are placed in Archive area because this notebook is an oldie?
Should check it?

If the BSOD will still appear after Windows XP update and after right driver installation then a hardware issue could be the reason for this issue?
By hardware malfunction I mean the graphic chip issue or memory module issue?.

Read other 17 answers
RELEVANCY SCORE 50

? OS - Windows 10 (just installed)
? x64
? Custom Built PC with WinXP installed, then Win7 ultimate
? 3 Year Old PC

CPU - Intel Core i5-3450 Ivy Bridge Quad-Core 3.1GHz (3.5GHz Turbo) LGA 1155 77W BX80637I53450
GPU - SAPPHIRE Radeon HD 7850 OC 2GB 356-Bit GDDR5
PSU - Rosewill RG630-S12 Green Series
MOBO - ASRock Z77 Extreme4-M

A BSOD occurs during the installation for any AMD display driver, as well as any other display driver for the intel HD Graphics.

Using DDU to remove previous drivers and attempting an installation from there did not help. The GPU was working fine before the Win10 installation, but now those BSOD have prevented the use of the GPU for anything.

AMD posted in their release notes for their latest Drivers that a BSOD will occur for AMD GPU/Intel CPU setups, and to try Windows Update for drivers. Windows Update will not complete the upgrade.

Hopefully someone can help me identify the problem. Can't rollback to Win7 either so I'm stuck with win10 for now XD

Read other answers
RELEVANCY SCORE 49.6

Hello

I recently did a clean install of Windows 10 'home' (64bit) on my machine.

1. Since this update, my PCI USB card no longer works.
In the Device Manager, I see "via rev 5 or later usb" with a yellow triangle and exclamation mark. When I try to update the driver I am told its is the latest.

How do I solve this - anyone else experienced similar and know where I can get the latest driver?
(I have tried the obvious things like uninstalling the hardware, unplugging the PC for 1 minute but nothing helps)

2. How do I manually override the Windows driver - for example, Windows seems to have issues with the USB speakers on the generic driver. When I try to update to a later Realtek driver, I point to this and get a message saying my driver is the latest.
I want the manufacture specific driver for some things and this may also help with my issue above if its caused by a redundant driver.

thanks

Read other answers
RELEVANCY SCORE 49.6

Hello
When I open a new tab to go on Youtube or to check my email, it slows down. Dramatically. I open up Windows Task manager and it says CPU:100%. I try to close IE, but it won't respond.
 

A:Windows IE7 reaching CPU of 100%

How much RAM is on that computer?

===================================================================

Please click HERE to download and install HijackThis.

Run it and select Do a system scan and save a logfile from the Main Menu.

The log will be saved in Notepad. Copy and paste the log in your next reply.

IMPORTANT: Do not fix anything
 

Read other 1 answers
RELEVANCY SCORE 49.2

Hi gang....

Sorry if this has been answered before.... but I didn't see a solution for my setup.

I have a new Gateway DX4720-03 PC with Vista x64 Home Premium and a SATA Optiarc DVD AD-7203S SCSI Cdrom Device.

I have a legal copy of Vista Ultimate x86, which runs my external hardware Ok. But this hardware does not have a x64 driver for my x64 Vista I already have.

I love the x64 Vista, but I need to dual boot to get my external hardware working in the x86 Vista.

When I boot up from my Ultimate DVD, to setup Dual boot and install the x86 Vista... things go ok until I get to a screen that says I need to install a missing device driver for my DVD drive....

OK... I've tried all the tricks I've read except the one about switching the DVD to being on the Slave.... except, being SATA, how do you do that? Is there a jumper on the back of the SATA DVD to switch it????

Any ideas? SATA drives are new to me... Thanks a bunch!!

A:Vista 64/32 Dual Boot - Missing CD/DVD device driver installation screen

This has been a known problem with the x64 installs and SATA drivers - I have seen a couple of options on the net, one being (of course) get an IDE drive - but one that *seems* to have worked for some folks is to change the SATA option in BIOS from Native to Legacy (if such an option is available) to get it to work.

Failing that, you could post a list of some of the options that *are* available in your BIOS and we can mull them over to see if changing one (or more than one) will work or not....

Read other 2 answers
RELEVANCY SCORE 49.2

Hi there,

Whenever I go to log into my Win. 7 PC, I see something that tells me the successful and unsuccessful attempts of getting onto my PC since the last login.

It's a great feature for those in businesses, but I dislike it. How can I get rid of this bugging feature?

A:Attempted log in tries in login screen-how to get rid of?

Hello Superluigi,

If it looks like the screenshot below, then you could use step 2 in METHOD TWO of the tutorial below to turn it off.

Logon Information




Hope this helps,
Shawn

Read other 3 answers