Over 1 million tech questions and answers.

Windows 10 installer doesn't detect NVMe drive

Q: Windows 10 installer doesn't detect NVMe drive

I have a Thinkpad T470 (20JN) with a 512 Gb NVMe drive lense20512gmsp34meat2ta. Linux was installed & works well with no problems. But I'm struggling with Windows 10 setup.I could not make its installer recognize NVMe disk. At the same time Hiren's BootCD 15.2 based on Win10 recognizes my disk successfully.I tried to extract drivers from boot.wim using DISM and to add them back to original boot.wim (index:2), but it gave noany positive change.Can you please give me a hint how to make NVMe work ?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Windows 10 installer doesn't detect NVMe drive

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 124.4

I have a Thinkpad T470 (20JN) with a 512 Gb NVMe drive  lense20512gmsp34meat2ta. Linux was installed & works well with no problems. But I'm struggling with Windows 10  setup.I could not make its installer recognize NVMe disk. At the same time Hiren's BootCD 15.2 based on Win10 recognizes my disk successfully.I tried to extract drivers from boot.wim using DISM and to add them back to original boot.wim (index:2), but it gave noany positive change.Can you please give me a hint how to make NVMe work ?  

Read other answers
RELEVANCY SCORE 79.6

For my recently bought E5570 Latitude I bought an new/bigger/faster SSD.
It's the Samsung 950 PRO with the PCIe connection and NVMe support.
I have created an Windows 10 install USB to doe a fresh install but windows does not see/detect the drive.
-edit-I was able to install windows by loading the F6 drivers for Intel Rapid Storage.
But not the less funny part, I only hit about 1000Mb/s reading while it should be around 2500Mb/s.Now samsung has a special NVME driver but that states no NVME drive is installed.Also samsung magician does not detect the drive correctly. The name is all weird and it has 0Gb storage.
Did anyone already come accross this issue?And if so how did you solve it

A:Windows 10 does not see/detect Samsung 950 PRO M2. PCIE/NVMe drive

Here is the guideline from Dell: 

Im also interested in E5570, some questions:
1. Quite many user reviews complain about high-frequency noise coming from mobo or PSU unit. Can you confirm?
2. Would you know if any available Dell SSD option is actually NVMe?
Also, the trouble is, you have to buy M.2 SSD from Dell in order to get 6cell battery.

Read other 4 answers
RELEVANCY SCORE 79.2

hi
trying to install windows 7 but when i come to choosing which drives to install on is says "windows doesn't detect any of drivers "
my laptop have dual hard disks
primary hard is "SSD" 250 GB ,secondary is "HDD" 2000 GB
bios detecting all of them. my OS now is win10 but im not happy with it so i want to back to win7.
bios options has AHSI only not IDE.
when i installed win10 it run smoothly ,it detects all hard drives ,but win7 didn't.
i saw when i googled that when windows 7 didnt detect any of hard drives, you have to install rapid driver so win7 will see all drives. i try that method but when im hitting browse button to install rapid drive ,windows could't install it
guys please help

Read other answers
RELEVANCY SCORE 78

Hi all, I have bought recently an ssd drive - Samsung 950 Pro M.2 NVM Express 256gb (model MZ-VKV256) and pcie adapter card for it and installed this stuff in my PC - HP ProDesk 600 G1 SFF.  Windows 10 installed on internal hdd and it sucessfully detected this ssd disk,  but when I tryed to install new windows 10 on new ssd - PC can not bot from it, because bios (latest v2.70)  does not detect it on booting, so is there a plan to add support nvme ssd drive to bios on HP ProDesk 600 G1 SFF?

Read other answers
RELEVANCY SCORE 69.2

Here's my hard drive:
Seagate Constellation ES ST3500514NS

I haven't been able to get Windows 7 installation to detect this drive for about two months now. I'm running on a Gigabyte GA-880GA-UD3H mobo, revision 2.1.

I recently found a list of drivers for my motherboard on Gigabyte, but I'm not sure if any of these will help me.
I also found some downloads for my hard drive.

Oh, and I can use this drive if I'm running Windows 7 on a different hard drive, but I just can't install Windows 7 on it.

A:Windows 7 Doesn't Detect My Hard Drive

Check if the new HDD is being detected in BIOS. Also, the HDD may be formatted as a file system not supported for Windows. Make sure it is formatted as NTFS.

Read other 5 answers
RELEVANCY SCORE 68.4

Install everything, the bios detect the hard drive (it's a new hard drive, never been use) but when installing the Win7 64, the hard drive list is empty.

Here my spec

Phenom II 940BE | Gigabyte 790X-UD4P | Seagate Barracuda 7200.12 500GB | XFX HD4770 512MB | OCZ StealthXStream 600W | NZXT Tempest

thanks

A:Windows 7 installation doesn't detect hard drive

You need to format new hard drives. no?

Read other 9 answers
RELEVANCY SCORE 68.4

Hello,
I have Windows 7 ultimate and I was backing up my PC to a cloud service along with installing Opera mobile emulator. When my PC gave me the BSOD, I restarted my computer and it started up my secondary drive.. My primary drive is no longer detected in the BIOS.. Both drives appear to show up in the device manager. Just not under the BIOS and my computer Any help would be greatly appreciated!.
Elliott

PC specs
Windows 7 ultimate
AMD FX-8350 Eight-Core
128 GB SSD (crucial)
128 GB SSD (Samsung)
Gigabyte 990FXA-UD3
More about : windows

A:Windows 7 BSOD, restarted and doesn't detect drive..

Hello Elliot mate some system specs would be helpful I know you have put a few there but it really helps to know what the motherboard is for example.
System Info - See Your System Specs

In the meantime can you send the dump files by any chance?
Dump Files - Upload to SevenForums

Read other 1 answers
RELEVANCY SCORE 68.4

Since upgrading to Windows 10, my PC does not "see" the CD/DVD reader/writer. CD/DVD is a SuperMulti DVD Burner with LightScribe Technology











Solved!
View Solution.

A:System doesn't detect CD/DVD drive after Windows 10 install

Hi: See if performing the procedure listed in Resolution Step 5 at the link below resolves the issue. https://support.microsoft.com/en-us/kb/314060

Read other 6 answers
RELEVANCY SCORE 68

Microsoft has released NVMe Hotfixes 2990941 & 3087873 that add native NVMe drivers to Windows 7.
However if I am say installing Windows 7 SP1 on say Samsung NVme drive and Samsung has released suitable drivers in the form of INF, SYS and CAT files, do I really need to integrate these MS Hotfixes in Windows 7?
Can Windows 7 SP1 supplied with Samsung NVMe drivers (Either slip streamed or during install) be able to detect Samsung NVMe drive and install itself on to it?
As the title says are those MS Hotfixes a must (sort of pre-requsite) to get NVMe drive detected during installation, apart from any vendor provided drivers?
Thanks.

Read other answers
RELEVANCY SCORE 65.2

I have two issues, do not know if they are related with bios issue. Raid 0 IssueI have tried https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P51-P71-Intel-RST-raid-drivers-for-fresh... With no sucess.Also tried same driver set from other website as well as full driver pack from lenovo. Running latest bios Thanks Wes

Read other answers
RELEVANCY SCORE 64

Hello! I'm having issues installing Vista Home Premium (64-Bit) on my self-constructed PC. The following are the specs:

-GigaByte GA-MA790X-DS4 rev 1 (with current bios of Mar 07)
-AMD Phenom 9600 Agena 2.3GHz Socket AM2+ 95W Quad-Core Processor Model HD960ZWCGDBOX
-Crucial Ballistix 1GB 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Desktop Memory Model BL12864AA1065 x2 for install purposes
-SAPPHIRE 100225L Radeon HD 3870 512MB 256-bit GDDR4 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card
-PC Power & Cooling Silencer 750 Quad (Crossfire Edition) EPS12V 750W Power Supply
-Seagate Barracuda ES.2 ST3250310NS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
-Pioneer 20X DVD?R DVD Burner Black IDE Model DVR-115DBK

Here is my issue:

1. The motherboard is set to Native IDE and detects both the IDE DVD Drive and the SATA HDD.
2. The Vista install DVD will boot up.
3. However, once I enter my reg key, Vista cannot detect a drive to install to.
4. I press Shift-F10 to open the command prompt (in vista).
5. I run Notepad.
6. Using the open feature of notepad, I can access the SATA drive and create/delete files and folders to it.
7. I can format the drive using the command prompt for vista.

I called Gigabyte and they are stumped. I've tried nearly every driver on the included CD and from the website. I've tried Native IDE, RAID (single drive array), Legacy IDE and SATA->AHCI modes. No joy. Vista just will not detect the drive.

A friend suggested doing... Read more

A:[SOLVED] Vista installer does not detect my SATA drive . . or does it?

Well, I appreciate the views . . . I hope someone out there can help me.

Read other 19 answers
RELEVANCY SCORE 63.6

OK,
My config is HP G6 1075 SA with W7 Home Premium 64 bit pre-installed. It was working well until last week when I decided to install Debian Linux. I am no N00B to Linux and have installed it probably 100s of times. Debian installed and booted well but Windows BSODed with an error 0x0000225 cannot access drive. I formatted C and attempted to reinstall Windows 7 but it is unable to detect the HDD. I accept terms of license and move on to the point of choosing disks but nothing shows up. (There is an option to choose drivers. Where do I locate them? The HP website isn't helpful and I can't even find my product let aside the drivers)

I have already tried :
1. Partitioning an NTFS file system in Debian. Doesnt show.
2. Deleting a partition in Debian and attempt to see the free space in W7 Installer. Didn't work.
3. Try to do the BIOS setting thing (Change SATA option from AHCI to compatible or something). I could find no such setting in BIOS. The BIOS was severely limited with only option of switching on fan.

What do I do ?
The chipset is Intel HM55 if that helps and harddrive is SATA 5400 rpm 500GB.

A:W7 installer doesn't detect SATA after Linux, Linux works smoothly

All Linux code must be deleted using the CLEAN ALL command.As you have had linux on the HD you need do a Clean all & full format.

Do a full clean & full format in command prompt.
1) Boot DVD & Press Shift+F10 (for command prompt)
DISKPART : At PC Startup
2) Boot DVD, & Command Prompt at Startup
(for command prompt)

Type in command line
DISKPART
LIST DISK
SELECT DISK # (win HD)
CLEAN ALL
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT fs=NTFS
ASSIGN
EXIT
EXIT





SSD / HDD : Optimize for Windows Reinstallation

Read other 5 answers
RELEVANCY SCORE 61.6

I am writing in because I think I've exhausted all means of trying to fix an issue with my drive.

As title states, I inserted a DVD into my LG GH24NS90 but Windows 7 is not detecting it.
Info about my computer :
GA-Z68XP-UD3 (rev. 1.0) - Gigabyte
1. Installed Windows 7 OS on IDE mode
2. Tried burning a DVD using ConvertXtoDVD but it burns very slowly (even though it was set at x16) and it freezes the computer when burning.

Hence, I tried to change it to AHCI mode as information on the internet says changing it to AHCI would solve the problem,

1. Update drive to latest firmware.
2. Changed to AHCI (in BIOS) and selected my SSD to boot with success!
3. Tried to insert DVD into drive but not detected!
What can I do!!!

A:[Help] LG Drive doesn't detect CD!!!

Bumping thread. Hoping for some help from fellow forumers here!

Read other 9 answers
RELEVANCY SCORE 61.6

can u guys help me my cd drives doesn't detect any of my cd
the drive is located and windows says its properly connected but none of the cd works
the light turns on and everything
tried to reformatt but teh drive won't respond
 

A:my cd drive doesn't detect cd

If all the drivers are installed and the computer reconises it the the Cd-rom is bad.
 

Read other 3 answers
RELEVANCY SCORE 61.6

my cd drive doesn't detect any cds
it shows the drive in my computer but it says no cd is in it
i tried to reformatt but can't sdince the cd drive doesn't work
if anyone who knows how to solve or have this problem plz help me
thanx alot
 

A:Help! My Cd drive doesn't detect cd

First, it could be lint or trash has gotten into and covered laser. Second, it could be the drive motor not coming up to speed or not at all! My sugestion would be try a couple of short burst of canned air to make sure you dislodge any dust. Then try a Cd, when drawer closes with a Cd on it, put a finger or two on the face plate you should feel the motor strat up or attempt to do so. If nothing happens then you need to replace Cd player!
 

Read other 1 answers
RELEVANCY SCORE 61.2

I have an ASROCK 890gx pro3 MB and GSkill Phoenix Pro 120 gb ssd. The BIOS screen shows the ssd. I have already installed a copy of Windows 7 to my samsung 2 tb HDD but also wanted it to be on the SSD as the primary boot option.I disconnected my HDD, changed the BIOS boot set up to AHCI and Windows installer would not show the ssd. Changed the boot set up to IDE and still no luck. Any suggestions? Thanks.

A:Windows 7 installer does not detect the ssd

Will the SSD show in BIOS?

Take a look at this Tutorial:
SSD - Install and Transfer the Operating System
SSD Tweaks and Optimizations in Windows 7
SSD Alignment
SSD / HDD : Optimize for Windows Reinstallation

Read other 4 answers
RELEVANCY SCORE 61.2

I'm quite "green" at computers so please excuse my ignorance...I am running windows xp...when I place a cd in my e drive it doesn't detect it at all...when I put it in my d drive..which is also my burner...it will detect it and run it once, only if I haven't done anything else on my computer after turning it on and going right to that function...but if I need a second thing done ... nothing...ie. I tried to download a two cd game for my son.
...I turned on my computer and the first disk installed then it said to take it out and
place the second disk in...when I do that it doesn't detect it. I don't have windows xp setup disk since I had it installed when I bought the computer by the company I bought it from....what should I do...? Thanks so much in advance for your help...please use "laymans" terms, if you are replying, so I can understand responses!
 

A:computer doesn't detect cd drive after using it once

Read other 7 answers
RELEVANCY SCORE 61.2

Hi everyone, this is my first time here. I apologize if this question has already been asked but a couple days ago I was trying to install a new piece of software for my daughter and my CD ROM drive didn't start up automatically like usual. I could hear it wind up but then it would stop so I went to 'my computer' and my D drive wasn't even listed there. I haven't used my D drive for a couple of months, so who knows how long this has been a problem. I had the klez virus back in July but then got rid of it. I don't think that caused the problem because after I got rid of the virus I reinstalled Norton and it worked just fine then. A couple people have mentioned that it coule be a lost driver but I don't want to waste time downloading programs that I don't need. Any thoughts?

Thanks.
 

A:Computer doesn't detect D drive

Read other 14 answers
RELEVANCY SCORE 61.2

Hey all,

When booting my computer, i seem to get stuck at "Detecting IDE Drives". It completes the cycle every once in a while, maybe once every 3-5 restarts. As well, my computer CANNOT boot off of my CD drive, only my disk drive. When I do boot from my HDD, my computer doesn't detect my CD Drive. Additionally, the drive doesn't even open nor does it have a light - although on occassion, it will work fine; it will open and light up as usual.

Can anybody explain how to fix this in lamens terms?

Thanks in advance!
 

A:Computer doesn't detect CD drive

There are a few things you can try as in this guide: http://www.techspot.com/vb/topic137666.html

However, because of the multiple problems you describe, in the end I think you will have to replace the drive with a new one.
 

Read other 15 answers
RELEVANCY SCORE 60.4

I am running a Intel D845BG mobo and have a 6.5gb hd connected to IDE0. I launch my machine and I can see the harddrive in bios as well as my other devices. When I start Windows 2000 setup, it says that it can't find boot partition to check signature. It gets to the initial setup and gives me 3 choices. to repair, setup, or exit. I choose install fresh copy. Then I get the error message, "Setup cannot find any hard disks installed on your computer" Press F3 to restart.

I have tried all jumper combinations on the hard drive, I know the hard drive is good but can't get Windows 2K setup to recognize it. Please Help.. I have tried everything.

Thank you in advance.
 

A:Setup W2K Doesn't detect Hard drive

Have you tried using a different ide cable?
Also have you tried a bios flash?
 

Read other 3 answers
RELEVANCY SCORE 60.4

I'm using a Gigabyte GA-EP35-DS3R motherboard, and my hard drive is a seagate barracuda 500gb.

The system is brand new, built myself. No previous operating system on it.
I tried installing windows vista. I get past everything, until it asks me to select a drive to install to, and the list is empty. I tried every driver on the mobo's cd, and every driver on their website, none of them worked. I've tried different SATA modes, and ports on the mobo, and it doesn't work (I would dear say I've tried everything, except another OS because I don't have access to one).

However, when I select browse to search for drivers, when installing vista, I can select the local drive and search it for drivers. Does this mean it's there and it's something else, or is it just an option and what not? (there's a floppy there too, but I have none installed on the computer).

My bios sees the HD just fine. I'm out of ideas, and friggin fed up. I tried contacting Gigabyte but that was pointless.

A:Vista doesn't detect my hard drive

set the sata to be seen as ide in the bios

Read other 7 answers
RELEVANCY SCORE 60.4

I have just purchased a new Dell XPS 8920 that comes configured with a 250GB NVMe M2 drive as the boot drive and I?d like to replace this with a Samsung 1TB 960 Pro MVMe M2 drive however I can find no way to load the Dell OS Recovery in a way that it can see the new disk and load Windows 10.   BIOS sees the drive, but not the recovery tool.   Has anyone got any suggestions or tried to do this?

Read other answers
RELEVANCY SCORE 59.6

Hi all,

I've looked all over the internet, contacted HP, and updated my Mobo BIOS, but to no avail. I have an HP Lightscribe DVD1070i optical drive that has one Serial ATA data connection, and one Serial ATA power connection. There are no jumpers for Master or Slave. I have an MSI K9N2G Neo Mobo with BIOS version 1.20. It is not detecting my SATA optical drive, but it is detecting my SATA HDD. The optical drive i have right now is an IDE drive which I would like to move to my secondary Desktop, but can't because it would leave my Main without a working Optical Drive. I was told by HP to install SATA controllers but I can't find anything like that for my Mobo on the internet. The MSI Live Update program doesn't even find anything for me. So, is there anyone who can help me with my dilemma?

~Josh
 

A:MSI Mobo doesn't detect HP SATA optical drive

If it helps, HP has told me to connect my SATA drive to another computer, but I can't because there are all too old and don't use SATA.
 

Read other 10 answers
RELEVANCY SCORE 59.6

Hello,

So i want to switch the HDD's of my 2 computers, i unplugged both drives, then i put one of the drives into the other computer attaching it exactly as it was (the master slave thingy) but the comp said it didn't detect and master or slave. So i took it out again and changed the master slave thingy so that it was the same as the HDD that i took out of the computer i was trying to get this HDD to work in.

Same thing happened, comp said it didn't detect any HDD at all.

Why can't it detect it?

Both drives are unformatted and have windows and stuff on them, i thought it'd be a simple switch a roo.

Does this mean that the HDD is not compatible in this other computer?

Or do i need to do something to make the computer detect the HDD?

Thanks.
 

A:Solved: Computer doesn't detect hard drive

I assume they are not being seen on the bios - correct

check the details on the HDD and make sure you have set to Master - what else is on the cable .....

are these identical machines ? because with windows you have installed all the motherboard drivers and even if you swap them around and get the bios to recognise them - windows may not work correctly
 

Read other 3 answers
RELEVANCY SCORE 59.6

I use 3 computers, in one that has Windows Seven and other Xp, the computer detects the external hard drive with no problem
But in another Windows Seven pc, it doesn't detect it at all, the hard drive makes a clicking sound and nothing else

So, what can it be?, I even connect it to a TV and can watch movies with no problem, but being detected in that computer, never

A:Computer doesn't detect external Hard Drive

Do other external drives work with that PC?

Does that external drive appear in Windows Disk Management? If it does, does it have a drive letter assigned? If not assign a drive letter.

Read other 1 answers
RELEVANCY SCORE 59.2

Hi there,We just received  a shipment of Elitebook 840 G3s.  I wanted to clone my current Folio over to the new laptop but was surprised that when I booted into clonezilla from a 4GB USB Kingston Data traveller that it didn't see the source 256 GB USB SSD Drive.  When I went into the BIOS, it doesn't see the USB Drive, but it does see the thumbdrive and internal SSD. I have tried USB 2 & 3 devices with different drives attached.  The drive is detected when booted into windows and I can browse it. Is anyone aware of an issue with the current 1.05 BIOS and eithe drive size etc... recognized by the BIOS for USB?

Read other answers
RELEVANCY SCORE 58.8

I have a new Precision 7710 with a 2.5 inch 1GB SATA SSD (system boot=Disk0) and a 1GB NVMe PM951 SSD.
I have been attempting to install Windows Server 2012R2 on the second, M.2 SSD (Disk1) into a GPT, NTFS partition.
Since this system has no DVD, I made a bootable UEFI thumb drive with the contents of the .iso installation for Server 2012R2.
The thumb drive boots OK and I can begin installation, but when it comes to choosing the target for installation, the M.2 SSD is not visible in setup.
The M.2 drive is clearly visible inside Windows 10 Pro as the D: drive.
So...I mounted the .iso setup file in Windows 10 and ran setup.exe. The install began and could see the target M.2 drive, and began loading files on the second SSD. It then attempted the first of several restarts that come with this process with the new Server 2012 R2 environment.
It sucessfully modified the Windows Boot Manager before the restart, then restarted, and the setup program gave an error because it could not find the target partition on the second SSD.
The setup environment then modified the Boot Manager to "Windows Setup Rollback" and proceeded to enter an infinite loop, attempting to delete files from the unreachable M.2 drive. I manually choose Windows 10 on the boot menu, and once booted changed Windows 10 back to the default OS.
I've tried several things (turning off Secure boot, changing from UEFI to legacy bios--it won't boot at all that way) , but I can't get that second disk t... Read more

A:Precision 7710 UEFI Bios and pre-boot does not detect second SSD (NVMe PM951) can't install Windows on it for dual boot

You're going to need to build a new set of boot media with NVMe drivers.
www.nvmexpress.org/.../

Read other 1 answers
RELEVANCY SCORE 58.4

I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux . Please anybody help me out to solve this problem

A:Error in installing windows 7, installer cant detect hard disk

Try loading the Sata controller drivers.
SATA Driver - Load in Windows 7 or Vista Setup

Read other 4 answers
RELEVANCY SCORE 58.4

Hi guys. I have a problem with ez cd creator. i did check for viruses, so don't worry about that. i unistalled adaptec easy cd creator 4 because it wasn't working correctly, and just installed roxio ez cd creator 5. it works fine, turns on, etc. i mean, but in the system tray it says "Direct CD, No supported Drive!". How do i get it to detect my CDRW, an HP CD Writer Plus 7200? Device Manager is fine, shows no errors, and the HP CD Writer does show up in device manager. Thanks.
 

A:[SOLVED] Roxio Easy CD Creator doesn't detect CDRW drive

Read other 16 answers
RELEVANCY SCORE 58.4

I tried to install Ubuntu and failed. i removed it using the ubuntu boot-repair so i will at least have my windows 7 back. now i get the message "Bootmgr is missing", and the windows repair (the one from the installation disc) doesn't even recognize my hard drive. when i'm loading the ubuntu installation or boot-repair it does recognize my hard drive.

i backed up all my files in case i need to format and install windows 7 again, but right now i can't do that because the installation disc doesn't detect my hard drive.

any suggestions?

A:Bootmgr is missing, startup repair doesn't detect hard drive

  
Quote: Originally Posted by orivolfo


I tried to install Ubuntu and failed. i removed it using the ubuntu boot-repair so i will at least have my windows 7 back. now i get the message "Bootmgr is missing", and the windows repair (the one from the installation disc) doesn't even recognize my hard drive. when i'm loading the ubuntu installation or boot-repair it does recognize my hard drive.

i backed up all my files in case i need to format and install windows 7 again, but right now i can't do that because the installation disc doesn't detect my hard drive.

any suggestions?


Just curious, why are you still running ubuntu's installation or boot repair? I appreciate the fact you may just be testing things, but I would suggest leaving well enough alone.

You may want to check the following link for some help;

Bootmgr is missing - Fix

HTH

Read other 4 answers
RELEVANCY SCORE 56.4

Never had this problem before with a motherboard not detecting a drive. Is it a BIOS issue that will be resolved once updated?

Check my spec page on user profile for my system info if this helps provide more info. It is running v4.1 and I can upgrade that to 4.3.

What happens is it will not detect the other HDD that windows is not installed on, but it didn't detect before any OS was installed on either drive, and this issue has been interchangeable between both HDDs. And each time Windows 7 setup detects both drives, not always - until I hot plug out and back in but it shows up then. Both HDDs show up when in windows but I run the risk of not being able to boot into windows having it connected. So as you can gather it is not RAID 0 as I normally have setup but AHCI for now. It is a new system and HDDs are healthy, pass all tests - and only a few months old.

I've not used AHCI mode before so howcome when I hotplug a HDD windows detects it but doesn't show up in computer, only under computer management? Only I could do with hotpluggin in a 2TB HDD I have that has backed up data on which I want to organised and move to another HDD so I can format it, I think it might be corrupted file system or something because when I hotplug it windows crashes whereas it never used to under my old system - this happens whether I use USB dock or SATA connection - hot plugging.

Advice much appreciated, thanks.

A:MB doesn't detect 2nd HDD while Windows does

Sorted it. BIOS update did the trick and 2TB HDD also detected now without crashing W7

Read other 1 answers
RELEVANCY SCORE 56.4

unable to detect Samsung NVMe 960 Evo M.2 SSD. on my Dell Inspiron 15 7560 
I upgrade the BIOS to latest available  1.1.6.
Any suggestions are most welcome :)

Read other answers
RELEVANCY SCORE 56

I'm trying to connect a Digital Camera through a USB to my XP computer but it does not show up in computer, why?
 

A:Windows doesn't detect Camera?

is the camera on? most require you plug it in to the usb then turn it on? just wondering kinda made that mistake with a brand new cool pix then threw it at a wall thank god for best buys accidental damage thingy
 

Read other 2 answers
RELEVANCY SCORE 56

I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. Can anyone tell me how to correct. (I'm not very technically experienced, but can follow basic instructions.)

The second display shows a black screen with the message "Cannot Display This Video Mode".

A:Windows 10 doesn't detect my second monitor

right click on desktop for "display settings" - pick the monitor that shows up that message -> click it to activate -> switch correct video mode for it. its prolly too high resolution issue.

also WIN+P -combination gives you chance to use "extended desktop" which you should use to configure the resolutions

Read other 6 answers
RELEVANCY SCORE 56

When I plug in a usb, it doesn't detect it, What should I do?

A:Windows 7 doesn't detect USB port

Check in device manager if the drive is up there. What kind of usb devise is not detected?

Read other 6 answers
RELEVANCY SCORE 56

When my systems goes BSOD and restarts, I have that screen where I can choose which mode I should restart (safe mode, etc...) However Windows doesn't detect my keyboard during that screen and I am forced to wait 30 sec and boot in normal mode automatically.

Now this wouldn't be that much of a problem but I need to update the defective firmware of one of my HDD. And I use a boot disk to do that and of course the boot disk doesn't recognize my keyboard. So this became a major problem and I can lost my hdd data anytime now.

My mouse and keyboards both use an usb port, I suspect that I need traditional mouse and keyboard using traditional ports.

I have a traditional mouse but I do not have a traditional keyboard unfortunately. But I have converters from usb to traditional port for both mouse and keyboard.

What I tested:
1. plug-in the traditional mouse and reboot, result the traditional mouse is recognized.

2. use the usb to traditional port for the mouse and reboot, it doesn't recognize the mouse

3. use the usb to traditional port for the keyboad and reboot, it doesn't recognize the keyboard

Any clue on how to have keyboard recognized as traditional please?

TIA

Edit:
Keyboard: Logitech G15 refresh
Mouse: Logitech G9

A:windows seven doesn't detect my keyboard

What are your system specs?

Check 'Device Manager' for any yellow triangles, if there are any check for new drivers from your OEM or motherboard website.
You should check for updated drivers even if no yellow triangles.

Can you borrow a keyboard with a PS2 cable, for testing?

Read other 4 answers
RELEVANCY SCORE 56

My PC was updated to Win10 almost 1 year ago and there wasn't any problem connecting my windows phone (Lumia 920).
I'm not sure when it started but probably since this summer my PC start to not detect my Lumia 920.
Actually Lumia 920 is detected and it can charge with PC, but I can't sync and open it.
I want to attach some pictures to show what is happning but I can't attach them while this site verify my account.

Read other answers
RELEVANCY SCORE 55.6

Hi, I have a small problem but a big problem for me.. So I bought the LED Samsunng SycnmasterEX1920X yesterday and I my video card is MSI n430gt... Is there anyway to reset my setting on the DVI-i port of my video card because when I plug my VGA to the Monitor and start up my PC it detects my monitor and in Nvidia Control Panel But If I plug my DVI-i and start up my PC... It doesn't detect my monitor even at the Nvidia Control Panel... Does anyone know what is my problem? Please.... Help me...Because I need to use the DVI-i to use Nvdia Scaling Aspect Ratio....
OS: Windows 7 64bit
Motherboard: Asus p7p55d-e pro
8gb ram
video card: MSI n430 Gt
Monitor: Samsung LED SyncMaster EX1920X
I use DVI-I to DVI-i Cable... Thanks.....
 

A:DVI-I doesn't detect my monitor, can I detect it in settings?

You already have a thread started for this problem here: http://www.techspot.com/vb/topic162995.html

Please do not post the same problem more than once. Thank you.
 

Read other 1 answers
RELEVANCY SCORE 55.2

Maybe this will help some people. It's a little easier alternative if you're in the same situation I am.

->Purchased new laptop with Windows 8.1 factory installed
->Purchased on April 14, 2014

->Laptop has UEFI motherboard
->HDD is setup w/ GPT

->Inserted Windows 7 Professional DVD
->Windows 7 setup cannot find a HDD / requests drivers

======FIX======
1.) Right-click your start button on the Desktop
2.) Choose "Disk Management"
3.) Right-click on your main HDD and choose "Shrink volume"
4.) Choose whatever size
5.) Right-click on the newly created unallocated space and choose "New Simple Volume"
6.) Do NOT format this volume
7.) Insert your DVD/USB/load ISO/whatever and start Windows 7 Setup
8.) I chose not to go online and get the newest updates, but that's up to you
9.) Choose your newly created simple volume
10.) Let setup continue as normal (Your installation will now find the hard drive(s) and partition(s))
11.) Once you're booted into Windows 7, right-click on computer and choose "manage"
12.) Go back to "Disk Management," and delete all your other partitions.
13.) Right-click on your Windows 7 Partition and choose "Expand this volume"
14.) You've essentially performed a clean install

If this proves to be a useful method for anyone else who's recently purchased a Windows 8 computer and is looking to (up)downgrade to Windows 7, I'll update it to be more in-depth and include pictures.

**... Read more

A:W8 downgrade -> Windows 7 doesn't detect HDD during install [FIX!]

Quote:
Laptop has UEFI motherboard


YES & NO, down to your UEFI/BIOS firmware setting.

As this is a OEM manufacturer's PC with Pre-installed Windows 8/8.1.

1) Downgrade to Windows 7.
Downgrade Windows 8 to Windows 7
Warning you must have the UEFI/BIOS firmware setting in Step Three set.

Make sure you read the NOTE at Step three.

2) If Using a USB Pen drive on a PC with a UEFI BIOS.
USB Pen drive need to be formatted to FAT32 as in
UEFI Bootable USB Flash Drive - Create in Windows
Take note of Step 11 for Windows 7.
Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7.


You will need to buy Windows 7.

Read other 3 answers
RELEVANCY SCORE 55.2

.......the CD or DVD burner (it is a slimtype DVDRW 9) I have a program installed that came with the PC called Sonic RecordNow! which looks okay but I have an episode of the simpsons on my hard drive I want to burn to DVD. There is only the option to make an exact copy of an already existing disc with Sonic RecordNow! and I would like the option to use both Sonic RecordNow! and Windows Media Player to burn stuff. Any suggestions would be great guys. Thanx
 

Read other answers
RELEVANCY SCORE 55.2

Hi,
I am having a strange issue with my windows 8 pc as it sometimes doesn't detect any network present and i have to restart it again to get the network. The issue happens usually every time i boot. But restarting once solves it. Any help?

A:Windows 8 doesn't detect network after boot

I'm having a similar issue. If I am not connected to an Ethernet upon boot, I cannot get connectivity after plugging in my Ethernet, nor does the Device Manager detect my Gigabyte EP45-UD3P dual NIC's. I have to reboot with the Ethernet inserted before the OS loads. then all works as should be. Strange.

Read other 2 answers
RELEVANCY SCORE 55.2

Hi there,

I'm running Windows XP sp3 and have a 500G Transcend USB external hard drive without external power and all was working very well, but suddenly Windows doesn't detect my hdd on startup, the Safely Remove Hardware item appears in the system tray and is showing the presence of the drive but it doesn't assign a drive letter to it and it also doesn't appear in My Computer untill I unplug it then replug it. Does anyone have a solution for this annoying problem. A little help is appreciated very much, thanks in advance.
 

A:Solved: Windows doesn't detect HDD on startup

The problem seems to be the HDD itself because i've tried another external HDD and it's working fine, what possibly can be the problem it's a very new HDD?
 

Read other 3 answers
RELEVANCY SCORE 55.2

Hello, i have a problem with my soundcard.
This is a separate sound card, so it's not a part of my motherboard.
The name of the soundcard is: "Creative Sound Blaster X-Fi Xtreme Audio PCI Sound Card"
The card and my optical sound (i use an optical cable for digital sound, which no longer works when i switch to "S/PDIF" sound in sound devices.) no longer works. When i go to device manager, it doesn't even detect that i have my specified soundcard, which i absolutely do.

Also after the re-install, my computer feels really slow. I have 16 gigs of ram, a good CPU, and a good graphics card, so that is not the problem. If anyone could figure out or have an idea what could be wrong with those two issues, PLEASE do reply.

I fear that after my Windows 7 re-install, a ton of drivers are missing. I don't have my 'recovery hard disc' anymore, which contained a lot of stuff for my PC. The computer store who installed my sound card, graphics card and more, removed that hard drive. I didn't notice that before i had to do a re-install, and they don't have that darn hard disc anymore.

Can anyone help me? Do i have to do something in BIOS? I'll attach a DxDiag of my computer to this post! Please help me!

A:My PC doesn't detect my soundcard after Windows 7 re-install.

You are probably missing needed drivers. Since you have an intel CPU, you have a motherboard with an Intel chipset. Go to the motherboard vendor and download the needed drivers, including the Intel chipset drivers. One of the main things the chipset drivers do is define (identify) all the hardware devices on or attached to the motherboard.

I didn't see what the motherboard was in DXDiag, the BIOS should give you that information. Manufacturer and model. Then go to that manufacturers downloads for the specific model motherboard. If there are no Windows 7 drivers listed, Vista drivers are compatible.

In addition, since you are using a separate sound card, you need to disable the on-board audio (the RealTek) in the BIOS. Two sound devices can conflict which could cause some of your problems.

Read other 7 answers
RELEVANCY SCORE 55.2

I have just installed Windows 7 Ultimate 32bit at my laptop and I tried to connect to my wireless network....

I went to the Control Panel and I saw the Connection Adaptors and only the Ethernet Adaptor was shown...

I have installed the Appropriate Drivers and it wasn't there again!

Help Please!

A:Windows 7 doesn't Detect Wireless Adaptor

A little more detailed information about the laptop may be helpful.
make/model type stuff.

Read other 6 answers
RELEVANCY SCORE 55.2

i have about a 5 yr old compaq running xp.i had bestbuy to put in a radeon 9550 avg graphics card and i had to restore my com now windows wont detect the card so when i try to install the soft ware it says it cant find any hardware to install the software.i could use any help plz and ty.
Edit/Delete Message
 

A:Windows doesn't detect my new graphics card

Double post

Already answered here: http://www.techspot.com/vb/topic112198.html
 

Read other 26 answers