Over 1 million tech questions and answers.

MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

Q: MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

Dear forummers,

Recently, I've been heving some BSOD'S wen putting my GE70-i550M287FD to sleep mode or hibernation. The NB just stays just active with a black screen for a while, only to end up in a BSOD eventually.
It gives me always the same BSOD, so I figured it would be caused by a single error. However, I haven't been able to detect and fix it up until now. I hoped that some of you might have dealt with it before or know how to deal with it.

The only hardware I've got plugged is the mouse. I have't been able to test if I got the same error without the mouse plugged. Also, this BSOD ONLY occures when going into hibernation/sleep mode.

This is a photo from the BSOD I keep getting once a week/2 weeks or so.

IMG_20140212_213442_zpse94cdbb9.jpg Photo by esmorax | Photobucket

I have read something about minidump files. How do I open them and do they contain any necessary information needed to fix this error?

Thank you in advance!

esmorax

RELEVANCY SCORE 200
Preferred Solution: MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

Hello Esmorax, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 8 answers
RELEVANCY SCORE 111.2

From day one when I opened up this laptop it was crashing. I've had the RAM replaced, the SSD (twice), factory reset, MOBO replaced, and still the same intermittent crashing. The company I bought this from "tried" to fix it but couldn't ever get anywhere. This has been a 2 year P.I.T.A. for me and I'm finally coming to you guys because the company I bought this from has informed me that my warranty is up and I will have to start paying for their "help". I thought that was comical. Nonetheless. Here I am. I need help. Not sure where to start because I've never been able to pinpoint the cause. Most of the time the BSOD reads "Driver State Power Failure". I've personally updated all of my drivers, chipset, BIOS, graphics card, etc. The vendor has also done the same. To no avail.

Let me know what I can do to help someone diagnose this for me.


Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 16273 Mb
Graphics Card: NVIDIA GeForce GTX 960M, -2048 Mb
Hard Drives: C: 110 GB (31 GB Free); D: 1863 GB (1381 GB Free);
Motherboard: ASUSTeK COMPUTER INC., G551JW
Antivirus: Windows Defender, Enabled and Updated
 

A:New Laptop - BSOD - Driver Power State Failure

It sounds like you have an ASUS ROG G551JW laptop which originally came with Windows 10 Home 64-bit.
You say you bought it new and had problems with it the very first day of use, so I'm surprised you didn't return it for another one instead of having hardware replaced in it for the past 2 years.

There are several links here that you can read about "driver power state failure" in Windows 10.
https://www.google.com/?gws_rd=ssl#q=driver+power+state+failure+windows+10&spf=1498270496270

----------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 111.2

Hello,
I am new. I cannot access my minidump folder because I do not have access and cannot find out how to get access, otherwise I'd post it up.

I am trying to download new chipset drivers from gateway and I am sitting at 0% the download will not start.

The laptop is new roughly 3 months old. I am running Vista 64 on a Gateway P-7800. I've BSoD'd probably 15 times in the last week or so. Please help. Thanks.

A:New Laptop BSoD Power State Driver Failure

Follow the instructions here: http://www.techsupportforum.com/1871981-post2.html

It will provide us with the minidumps and more information about your system.

Read other 11 answers
RELEVANCY SCORE 110

This error has been happening for 80% of the time when my laptop is shutting down or restarting. It started few days ago when I removed everything and reinstalled windows. I then refreshed my laptop couple of times but the problem is still persisted. I updated windows and all devices are up to date. Restarts are also slow when it does restart properly.

When I tried updating to windows 8.1, it would stop at "setting up 82%" and had to hold the power button to turn off the laptop couple times.

Dump file: https://www.dropbox.com/s/jdivgtmu3a...37-01.dmp?dl=0

ASUS laptop
Disk Drives: TOSHIBA MQ01ABD100
DVD/CD-ROM drives: HL-DT-ST DVDRAM GU71N
i7 3537U
8 GB DDR3
Nvidia Geforce 740M

A:BSOD - Driver Power State Failure when laptop shuts down

Please read BSOD Posting Instructions

Read other 2 answers
RELEVANCY SCORE 108.8

Hi,

I'm getting frequent random BSOD Power_Driver_State_Failure on my ASUS G551JM Laptop (https://asus.com/support/Download/3/...RbVetG02i5/41/) It happens while plugged in and running off battery but more frequently on battery power. It usually happens within 30 minutes of powering on the laptop or waking it up from sleep/hibernate. It primarily happens after logging into windows but on rare occasion will blue screen prior.

I've updated drivers from Asus and chipset manufacturers websites: intel rapid storage driver, Intel MEI driver, Intel INF driver, Intel wifi and bluetooth drivers, clean installed nvidia gtx 860m drivers. I tried to update intel HD graphics drivers but got this error message:
Computer Manufacturer Graphics Driver Detected. Your computer manufacturer customizes the drivers that run Intel components on your machine. You might lose functions and cause other technical issues by installing the Intel drivers.
Windows updates are up-to-date and no virus or malware.

Please help,
Thank You.

DM Log collector Tool LOST-Wed_08_03_2016_190523_80.zip

A:ASUS Laptop Constant BSOD Power Driver State Failure

Hi rapidvodka,

I would recommend to install the Nvidia drivers from ASUS

Code:
2: kd> !irp
Irp is active with 0 stacks 0 is current (= 0xffffe001e81748c0)
Mdl=ffffd0006f0853c8: No System Buffer: Thread ffffd0006f085458: Irp stack trace.
cmd flg cl Device File Completion-Context
2: kd> !irp ffffe001`ed49d010
Irp is active with 6 stacks 4 is current (= 0xffffe001ed49d1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001e9fb3540 00000000 fffff80103cfe590-ffffd0006a7eb8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001ed481040 00000000 fffff80352fa875c-ffffe001ef323f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for n... Read more

Read other 3 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98.4

So about a month and a half ago I bought myself a new MSI Laptop, and in the past 3 weeks I've had 5 Driver Power State Failure (DPSF) BSOD's. I've searched around but I'm not confident enough when it comes to BSOD's to actually do anything without first getting some advice for my particular problem.All I have really been able to tell from this is that the error always occurs at the same location, ntoskrnl.exe (+7cc40), which, being a critical part of the OS, I assume is a very bad thing. Anyways, here are the minidump files:==================================================
Dump File : 090111-18798-01.dmp
Crash Time : 01/09/2011 2:40:06 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`07a29a10
Parameter 3 : fffff800`049423d8
Parameter 4 : fffffa80`0aa02970
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cc40
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\windows\Minidump\090111-18798-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File... Read more

A:Driver Power State Failure - New MSI Laptop

I would try...downloading (from MSI website)...chipset and wireless drivers for your system...then removing the current drivers via Device Manager, followed by installation of the new ones.

Or...if you have drivers CD with your system, you can use that, rather than downloading drivers from MSI website.

Louis

Read other 3 answers
RELEVANCY SCORE 98.4

Hey guys!
I am hoping someone can help me.. I am going to upload the mini dump files that have been saved. I just got this new laptop today and have since had about 10 blue screens of death. I have not installed anything on this new computer besides Firefox. I am hoping that somebody can help me! thank you.

A:driver power state failure first day of use new laptop

Hi.

Please update this card reader driver to alleviate your issues:

Code:
o2sdx64 o2sdx64.sys Wed May 06 21:56:18 2009
Also good to do:

I also noticed many older drivers. Please visit ATI's website to get the latest video card driver.

Read other 4 answers
RELEVANCY SCORE 98

I get a
BCCode: 1000009f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA80036E5680
BCP4: FFFFF80000BA2740
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
when placing my computer into hibernate state. Also my usb ports cut out after a long time on the computer and device manager stops recognizing all input. I have reformatted the drive and reinstalled all up to date drivers.

Can any one help me please?

A:BSod Driver Power state Failure

Hi -

Please run - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 98

I started getting a BSOD almost every night after installing a new video card. It's an AMD APU that I was running with on-board graphics, and I just put in a GeForce 8800GT. I can't figure out what driver is causing it, as far as I know I'm running the latest and most appropriate driver for the card. Attaching the minidump files.

Thanks

Attachment 247194

A:BSOD Driver Power State Failure

Hi shhaggy,

The mini-dump exhibits 'ntsokrnl.exe' error that may indicate software issues. As per my experience, a fresh 'Windows reinstall' has been most useful. However, you may also try the following steps:

1. Reinstall 'Video Card' drivers
Click 'Start' and type 'devmgmt.msc' (without quotations) in 'Search programs & files' > Tap 'Enter' > Expand 'Display Adapters > Right click & uninstall 'GeForce 8800GT' (Confirm software install if prompted) > Follow through with the uninstall and restart the system > Click Drivers | GeForce to run 'Auto-detect GPU Utility' > Download and install the suggested driver > Restart system and check results

2. If the issue persists, run 'System File Checker tool' to see if that works: Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

3. If you still experience issues, try 'Factory Reset' (If a healthy recovery image is available)
If a healthy 'Recovery Image' is available (on the hard drive or on an external media), you may restore the system back to known-good settings. This step may not always work; you may give it a shot before doing a 'fresh Windows Reinstall'.

Note: 'Factory Image Restore/Operating System Reinstall' will lead to data-loss; please backup the data on an external media before attempting the restore options.

Read other 1 answers
RELEVANCY SCORE 98

Hello,

I've been getting these BSODs and the error says it's caused by the ntsokrnl.exe. Below are the details of my laptop and I've attached the required reports. Any help is appreciated.

Thank you!

ASUS Laptop model K53E-BR5

- Windows 7
- x64
- OEM
- Age of system: 8 months old
- Age of OS: 8 months old

- CPU: Intel i3-2310M
- Video card: Integrated Intel HD Graphics 3000 video
- Motherboard: Not sure about the motherboard, this is an Asus Laptop with the Bios version: American Megatrends Inc. K53E.216

A:BSOD - Driver Power State Failure

Hi -

What is plugged into USB ports?

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800714f060 00000000 fffff80002ed07f0-fffffa80029c1220 Success Error Cancel pending
\Driver\usbhub nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000006
[ 16, 2] 0 e1 fffffa800700da00 00000000 fffff80002ed07f0-fffffa800ca43120 Success Error Cancel pending
\Driver\usbccgp nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800280a790
Run - http://www.techsupportforum.com/foru...ed-473665.html


Regards. . .

jcgriff2


`


BSOD SUMMARY

Code:
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\041312-15771-01.dmp]
Built by: 7601.17790.amd64fre.win7sp1_gdr.120305-1505
Debug session time: Fri Apr 13 16:28:36.571 2012 (GMT-4)
System Uptime: 0 days 1:10:36.554
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_usbhub.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0714f060 fffff800`00b9c3d8 fffffa80`0521f860
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\040812-19172-01.dmp]
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Sun Apr 8 23:24:59.031 2012... Read more

Read other 10 answers
RELEVANCY SCORE 98

Hi

i recently bought a second hand alienware and i am constantly getting driver power state failure bsod

is this the code you need for someone clevere than me to tell me whats causing the problem

9f
BCP1: 0000000000000003
BCP2: FFFFFA800D619A10
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA801392F560
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

thanks in advance

A:driver power state failure bsod

btw iv updated drivers and bios from dell and ran the diagnostics checks the last bluescreen analyzer is this




0x0000009F_0x0000000000000003__0xFFFFFA800D595A10__0xFFFFF80000B9C3D8__0xFFFFFA8012C68A90_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5B3A10__0xFFFFF80000B9C3D8__0xFFFFFA801265FB40_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D5060__0xFFFFF80000BA2748__0xFFFFFA80125D4490_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800F9F1E10__0xFFFFF80000B9C3D8__0xFFFFFA8012AB9C60_C__Windows _system32_drivers_hdaudbus_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D618060__0xFFFFF80000B9C3D8__0xFFFFFA8011AFE1B0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D614A10__0xFFFFF80004157748__0xFFFFFA8013485400_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D9A10__0xFFFFF80000B9C3D8__0xFFFFFA8012A47CA0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D617060__0xFFFFF80000BA2748__0xFFFFFA80128E54D0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D597A10__0xFFFFF80000B9C3D8__0xFFFFFA801262B200_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D610A10__0xFFFFF80000B9C3D8__0xFFFFFA800D7FA800_C__Windows _system32_drivers_pci_sys

Read other 9 answers
RELEVANCY SCORE 98

Morning, all.

I could use a bit of help--I've been having a number of BSODs lately, and they always relate to a driver power state failure. Doing my own research has not really been as productive as I'd like.

Of note: this really only happens when I open the laptop back up after leaving it alone for some hours (when I wake up, and occasionally when I get back from work). The computer will run fine for about 5-10 minutes, and then I get a BSOD. I'm running Vista, SP2, on a Dell Inspiron 1525--haven't really had any major problems with this before.

I'm attaching a zip of the minidump and the msinfo32 file as I saw requested in another thread. Many thanks for any help!

Best
writingmiles

A:BSOD and Driver Power State Failure

For more specific troubleshooting, please follow the blue screen posting instructions to provide your full reports.http://www.techsupportforum.com/foru...ta-452654.html
Crashes point to your M-Audio KeyStudio device and/or its drivers. It is conflicting with your PreSonus Inspire WDM device and/or its drivers.

-----

Read other 2 answers
RELEVANCY SCORE 98

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98

Wondering if anyone can help....

I bought this laptop back in January, and have had this problem, almost as long as I have had the computer. I have zipped up the reports another thread said to zip up and attach. Any help with fixing this problem is extremely appreciated!

System Info:

Toshiba P505-S8980
Running Windows 7 - Home premium if I am correct.

This is getting aggravating, as I use it as a mobile DJ, it hasn't happened on a gig yet, thankfully, but do not want to take a chance of it happening!

Thank you for any help!

A:BSOD - Power Driver State Failure

Files needed are attched to this message!

Read other 2 answers
RELEVANCY SCORE 98

Hello,

Did a clean install of Windows 8.1 - I previously had Windows 7. I have already had 4 'Driver Power State Failure' BSODs. I have attached the files from the SF Diagnostic tool.

Any solutions?

NB: This is a custom built PC with an Asus P8H61-M LX3 Plus R2.0 mobo.

Thanks in advance.

A:BSOD - Driver Power State Failure

Hi lfc123 and welcome to the forums!

Driver_Power_State_Failure with code 9F means that an Input / Ouput Request was not received back by the operating system even after a long time.

I have analyzed your DUMP files and the problem is caused by "netr28ux.sys" . I was only able to analyze the first DUMP file as the second one is corrupt, dunno why?

Visit this link Driver Reference Table

and update your driver from the given link.

Let me know incase the problem is not resolved and I will be happy to assist more
Also, if this solves your problem, please don't forget to mark this thread as solved.

Read other 1 answers
RELEVANCY SCORE 98

I don't even know why this started but it did a few weeks ago. Funny, I've never had a BSOD before even though I've owned 3 or 4 computers. Anyway, this one has occurred several times and it always seems so random. It kinda seems connected to Standby or Hibernate because it usually happens after one of those two things occurs. In fact with hibernate I can usually guess that right after it comes out of hibernate, a few minutes later I will be greeted with the wonderful BSOD.

Here is the minidump. Help would be very appreciated.

A:Driver Power State Failure BSOD

Only ran the last 5 memory dumps (the 6th one was from December, so I left it out).

A couple of KB articles that relate to the errors that you're getting and the sleep/hibernate functions:

KB 975599 Stop error when you put a computer that is running Windows 7 or Windows Server 2008 R2 to sleep or into hibernation, or when you restart the computer: "0x9F"
KB 977186 Error message when you try to resume a Windows 7-based or a Windows Server 2008 R2-based computer from hibernation: "Stop 0x0000009F"

4 of the dump files blame atapi.sys (a Windows driver), while the 5th blames Apfiltr.sys (a component of your Alps touchpad drivers)

I'm not sure about the exact cause - but I would:
- check to see if the KB articles above apply to your system
- update your Alps touchpad drivers
- update your chipset/storage drivers
- update your graphics drivers

You can get the drivers from here: Select software and drivers HP Pavilion dv4-1225dx Entertainment Notebook PC - HP Customer Care (United States - English)
Please uninstall the old drivers first, then install the freshly downloaded one's.

Please post back if that doesn't stop the BSOD's.

Summary of the BSOD's:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Apr 23 21:30:31.203 2010 (GMT-4)
System Uptime: 0 days 3:05:41.747
BugCheck 9F, {3, fffffa8004c1c680, fffff80000ba2748, fffffa800834fc60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: firefox... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello, I am having random BSOD crashes mostly when browsing on internet.

My Build is
- x64
- Original OEM
- > 1 month old
- > 1 month old, never reinstalled.

Any help is more than welcome.

A:Driver State Power Failure BSOD

Hello and Welcome !

Seems like lot of issues are going on. First thing i noticed is sptd.sys duplex driver which i well known for BSOD. I would recommend to uninstall it follow this article DuplexSecure - FAQ

Also it looks to me like it's an issue with AiCharger.sys - an Asus program named AiCharger (may also be a part of the Asus AISuite or ASUS Ai Charger). Then uninstall the current copy of the program and install the freshly downloaded copy.

Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! ? Captain Debugger

Bugcheck:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80083a1060, fffff8000460e518, fffffa80060214c0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+292b0 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *... Read more

Read other 8 answers
RELEVANCY SCORE 98

Please assist with a frequent and annoying BSOD, which gives the error stating: "Driver Power State Failure".

Files attached and information below.


? OS - Windows 7 SP1 (32-bit)
? What was the original installed OS on sthe ystem? Win7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Pre-loaded on laptop
? Approximate age of system (hardware) - 2 years
? Approximate age of OS installation (if you know) - 6 months
? Have you re-installed the OS? Yes after hard drive crashed and then replaced with SSD

? CPU - I5 3320M
? Video Card - Intel 4000

? System Manufacturer - Lenovo T530
Laptop

I have also run a Driver Verifier, but don't know where to find what. I did this before the Sysnative APP and the Perfmon reports.

The help is much much appreciated.
Tnx
Doug

A:BSOD - Driver Power State Failure

Hi. . .

You need to update your H5321 gw Mobile Broadband Driver.

The only known source is Lenovo Support - http://support.lenovo.com/us/en

If you can't find a driver update, go into Device Manager and disable the device since you are using your Intel 82579LM Gigabit Network Connection Ethernet for Internet.

Regards. . .

jcgriff2

`


Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert\AppData\Local\Temp\Temp1_SysnativeFileCollectionApp.zip\SysnativeFileCollectionApp\060115-10795-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`831769d4?

************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.x86fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0x8304e000 PsLoadedModuleList = 0x831985b0
Debug session time: Mon Jun 1 04:14:29.677 2015 (UTC - 4:00)
System Uptime: 1 days 1:34:53.050
Loading Kernel Symbo... Read more

Read other 3 answers
RELEVANCY SCORE 98

First let me give a huge "THANKS" for this extremely helpful forum and service. I would not have any hope of correcting this issue on my own or without giving up my machine for a few days to an IT pro to fix it, which I do not have the luxury of time to do.

Here are my details:

? Windows 7 Professional (6.1.7601 Service Pack 1 Build 7601)
? x64
? Vista Premium (2009)
? Original Vista was installed already, Windows 7 upgrade came from a retailer and I installed it.
? Age of system (hardware) - 3 years
? Age of OS installation - have you re-installed the OS? I have not re-installed, but there are multiple copies of it because I added a new HDD and cloned the original before making the new one the primary HDD.

? CPU - Intel Core2 Duo T9550 @ 2.66GHz
? Video Card - NVidia GeForce GT 130M (1GM VRAM)
? MotherBoard - Don't know
? Power Supply - 90W, brand unknown

? ASUSTek Laptop
? N90SV


Thank you again for this service. I look forward to your diagnosis.

A:BSOD: Driver Power State Failure

From the last 9, 3 are corrupt, 3 are inconclusive, and 3 name the USB hub driver.
Do you have anything plugged into a usb port?
Is there any memory card in the card reader?(it runs off the USB hub)

athrx.sys Mon Oct 5 12:33:57 2009
Atheros AR928X Wireless Network Adapter Driver, if there is nothing from 2012 on the Asus page for your model this is the best place I know of to get it >
ATHEROS drivers for Microsoft Windows (Atheros?????)

There appears to be a USB web cam set as disabled in device manager, was this done manually by you, or did Windows do it(because of a problem)?
USB 2.0 UVC 1.3M WebCam USB\VID_064E&PID_A116\CN1316-S30B-MI03-VS-R03.01.03 This device is disabled.

I'm also seeing older AVG drivers
avgldx64.sys Thu Jun 3 1748 2010 (4C081968)
avgmfx64.sys Wed Aug 17 07:31:52 2011 (4E4BA6A8)
avgrkx64.sys Wed Feb 10 22:52:44 2010 (4B737F0C)
And
a2ddax64.sys Thu May 19 08:09:43 2011 (4DD50887)
a2dix64.sys Wed Nov 2 05:10:36 2011 (4EB1090C)
a2util64.sys Fri Oct 16 06:26:21 2009 (4AD84A4D)
EMSISOFT/A-SQUARED MALWARE-IDS UTILITY DRIVER

Are you using both programs? Is either one up to date?

ghaio.sys Mon May 30 05:34:05 2005 Way too old for a Win7 driver> ASUS NB Probe program> Check the Asus site for an update.

These are Vista era Suyin USB 2.0 Webcam drivers
sncduvc.SYS Mon Jul 7 06:30:20 2008
snp2u... Read more

Read other 11 answers
RELEVANCY SCORE 98

This is a HP pavilon dm4 Laptop, windows 7 64 bit.

The BSOD seems to always happen when the computer is plugged in, although it has happened a couple times when it wasn't. Its never when I am in the middle of doing something, only when I leave the computer alone for a while will it crash like this. For example, even if I am just listening to music or watch a movie, it doesn't crash. It's like it does this when it gets bored or something... As long as it is doing something it is fine.

I updated the drivers using HP's tool, but the problem hasn't gone away.

A:BSOD Driver Power State Failure

Sorry, I posted the incomplete file the first time... Here are the other files because the complete .zip file exceeded the maximum size.

Read other 2 answers
RELEVANCY SCORE 98

Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things first, i need to find out why i cannot shut down so hopefully someone can ... Read more

A:BSOD - driver power state failure

  
Quote: Originally Posted by onyxquark


Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things... Read more

Read other 9 answers
RELEVANCY SCORE 98

I know little about computers but I can follow directions well.

This is my computer

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4089 Mb
Graphics Card: NVIDIA GeForce 9800M GTS , 1024 Mb
Hard Drives: C: Total - 295242 MB, Free - 181383 MB;
Motherboard: Gateway , IMV , Not Applicable , INVALID
Antivirus: avast! Antivirus, Updated and Enabled

It has been giving me the blue screen of death at least daily for over a week usually around 8 pm but it does like to mix things up and do it at other times. It was doing this same kind of thing this past march and I reformated which fixed the problem. However I would rather not do that again. I did a system restore back to the begining of the month but that didn't help.

Based on Blue screen viewer most of my prolems have been caused by ntoskrnl.exe. I have attached JPEGs of what it shows
 

Read other answers
RELEVANCY SCORE 98

Hello,

I have some recent issues with BSOD after start up. After that my laptop just reboots and works fine for the remainder of the day. I recently did a complete clean install of windows 7, because before that I also had some issues with BSOD. See attached the zipfile,

best regards

Peter

A:BSOD Driver power state failure

Your logs are incomplete, important files are missing that we need to analyze your issue/s. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

Read other 9 answers
RELEVANCY SCORE 98

Hello TechSupportForum guys ,

i hope you can help me resolve following issues:

1. ISSUE - DVD ROM DRIVE

My DVD/CD ROM (MATSHITA UJ8C2) powers off on its own each time i start the laptop. I changed options in power management but the problem still persists. Also I am only able to eject dvd-drive, when pressing on eject button on the side of laptop. Ejecting in My Computer doesnt work - DVD RW Drive (powered off) is displayed with single line crossed red circle icon.

Device Manager message today:

Two different messages for DVD ROM Drive appeared after I booted the laptop.

Trasparent icon in device manager:
Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

Icon with yellow triangle
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

2.ISSUE - Continueous Dropping of Shared internet connection

For the last couple of days, when I share the internet connection via wifi using cmd line netsh wlan start hostednetwork, the other devices - laptop thinkpad w520 and mobile phones - lose connection after few minutes. I must then turn off/on wifi adapter and restart the batch file with netsh wlan start hostednetwork. However, sometimes the wifi adapter doesnt turn on, so I'm forced to reboot... Read more

A:BSOD - Driver Power State Failure

Update to ISSUE 1 - I tried several times uninstalling driver from device manager and let windows install it back again on reboot, but the problem persists. Today the DVD drive totally disappeared from My computer and in device manager the driver is with yellow triangle...

Read other 1 answers
RELEVANCY SCORE 98

Hello, I seem to be having a bit of a problem with Windows 7. The computer seems to crash whenever Im using it. It's not limited to specific tasks... it crashes whenever it wants. When it does happen, i'll get a 0x9f error.
Not really sure what info to include but here's what I know the computer has:

Model: Sony Vaio AR250G
HDD: 180GB SATA drive (I think)
RAM: 2GB
Processor: Intel Centrino Duo
OS: Windows 7 Ultimate 32 bit

Ive attached some dump files too, I hear that they are useful.

Any help is really appreaciated.
Thanks a bunch.

A:Driver State Power Failure BSoD

It appears as if your webcam drivers are causing the issue. Please uninstall them and install the latest version.

These old drivers need to be updated:
Code:
826c0000 826fd000 ti21sony ti21sony.sys Mon Feb 20 19:32:31 2006 (43FA5F9F)
826fd000 827a7880 slim slim.sys Fri Jun 30 04:13:28 2006 (44A4DD28)
88e09000 88ec9000 iaStor iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
88efe000 88f0e780 SI3132 SI3132.sys Wed Sep 21 12:04:55 2005 (433184A7)
88f7a000 88f85080 PxHelp20 PxHelp20.sys Fri Oct 28 14:29:12 2005 (43626DF8)
88f86000 88f88880 SiWinAcc SiWinAcc.sys Mon Nov 01 15:21:31 2004 (41868CBB)
895e2000 895e3480 SiRemFil SiRemFil.sys Tue Sep 20 18:18:19 2005 (43308AAB)
8a810000 8a8d0000 dump_iaStor dump_iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
8a921000 8a925b20 AegisP AegisP.sys Mon Oct 24 10:38:50 2005 (435CF1FA)
8f421000 8f8615c0 nvlddmkm nvlddmkm.sys Tue Feb 20 20:05:48 2007 (45DB9AEC)
8f971000 8f997e00 e100b325 e100b325.sys Fri Nov 16 13:53:32 2007 (473DE72C)
8f998000 8f9c1000 Apfiltr Apfiltr.sys Tue Dec 05 06:26:00 2006 (45755748)
8fc33000 8fcd6000 stwrt stwrt.sys Tue Feb 06 13:14:55 2007 (45C8C59F)
8fd1e000 8fd4f580 HSFHWAZL HSFHWAZL.sys Tue Oct 18 19:52:32 2005 (43558AC0)
8fd57000 8fd5e580 SonyImgF SonyImgF.sys Mon Mar 06 04:38:59 2006 (440C0333)
8fe19000 8fe30000 5U870CAP 5U870CAP.sys Fri Jun 30 04:27:08 2006 (44A4E05C)
8fe34000 8ff27d00 HSF_DPV HSF_DPV.sys Tue Oct 18 19:53:21 2005 (43558AF1)
8ff2... Read more

Read other 2 answers
RELEVANCY SCORE 98

I've been getting a driver state power failure BSOD, I have no idea where the problem is coming from. minidump is attached. It's started recently, and I've been having problems now with the game Skyrim now too.

A:Driver Power State Failure BSOD

Update: Just encountered another BSOD, this time while browsing youtube. Both minidump files attached.

Read other 1 answers
RELEVANCY SCORE 98

? OS -Windows 7
? x64
? Vista x64 original
? Age of system ~ 4yrs
? Age of OS installation - just reinstalled about a month and a half ago
? Q6700 quad core 2.66
? 2x 8800gt
? Asus p5n-e sli
? Power Supply - xion 800watt


the blue screen usually happens after the computer hibernates or something similar. i know it happens alot more than i actually see because i come back to my computer and it will have a recovery message. if theres anything else i need to post just let me know.

A:BSOD Driver power state failure

Are you overclocking - either the system or the video card? If so, please stop until we're finished troubleshooting.

Please check the KB articles about hibernation/sleep at this link: http://www.carrona.org/bsodindx.html#0x0000009F

There are 11 memory dumps
3 different BSOD errors
and 4 different causes blamed (all are hardware or Windows drivers)
This makes a hardware failure a possibility. In particular, you have 4 STOP 0x124 errors - which are usually either hardware or compatibility based. Please follow the instructions for troubleshooting STOP 0x124 errors here: http://www.sevenforums.com/crash-loc...-what-try.html

The P5 series of motherboards tends to have issues with RAM in Win7. Please don't use the Auto setting in the BIOS - rather, visit the website of the RAM manufacturer, get their recommended settings and use them in your BIOS.

Asus doesn't completely certify your motherboard for Win7 - so you may have issues that involve compatibility. Also, in this case, there is a driver present that is a known cause of BSOD's (ASACPI.sys dated from 2005). As there are no Win7 compatible drivers listed, you'll have to download the Vista 64 bit version and install it in Comaptibility mode. Again, this will be at your own risk as there's no guarantee of compatibility.

Here's the link to the page for the driver: http://support.asus.com/download/dow...ge=en-us&os=30
Expand the Utilities section and download the "ACPI driver for ATK 0110 virtual device&quo... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi, I've been getting this BSOD error quite frequently now and I'm not sure what the problem is.
I've attached the zip from the SF Debug Tool.

Note: I have a modded BIOS for lower GPU voltages from
L502X modded bioses download (GPU voltages and more!)
and also have my GPU underclocked if that information is relevant.

A:BSOD Driver State Power Failure

Hi Aurum & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sat Dec 20 08:06:04.657 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\122014-5562-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

System Uptime: 0 days 0:08:10.789

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+1509a0 )

BugCheck 9F, {3, ffffe000cf5eb4f0, ffffd00020775960, ffffe000d5bf2bd0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000cf5eb4f0, Physical Device Object of the stack
Arg3: ffffd00020775960, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe000d5bf2bd0, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz"

MaxSpeed: 2000

CurrentSpeed: 1995

BIOS Version A12

BIOS Release Date 09/07/2012

Manufacturer ... Read more

Read other 8 answers
RELEVANCY SCORE 98

Hi,

I have been having a problem with multiple BSOD on my almost-new laptop (got it in November).

The blue screen will happen at completely random times, sometimes I am just surfing the web when it happens.
Today it has happened twice withing 10 minutes.
I have of course Googled it, but there seems to be a lot of different solutions, and they all rely on the mini dumps.

I have no experience when it comes to these crash dumps, but I have gathered them in a zip file and I really hope someone can see what the problem is!

My specs are as follows, please ask if you need more information:
XMG A723 Shark Gaming Edition laptop
Intel® Core™ i7 4th Generation Quad Core
NVIDIA® GeForce® GTX 765M 2GB GDDR5
3 x 204-pin SO-DIMM sockets supporting a maximum of 24GB 1600MHz DDR3 memory
Intel HD Graphics
Intel® HM87 Express Chipset
2x 9.5mm 2.5" SATA-III Drive
1x mSATA-III SSD

Thank you in advance!
- Sophie
 

A:BSOD: Driver power state failure

Read other 8 answers
RELEVANCY SCORE 98

For some reason, I've started having this problem again, and I can't pinpoint what is causing it. I'm getting the BSOD with the error message "Driver Power State Failure." I've tried certain things to prevent, but to no avail.

Here is my system info:

OS-Vista Home Premium SP2, 64 Bit
This is the original OS on the system
Came pre installed on the laptop
Laptop is about one year old
OS has never been re-installed

Afraid that is all I know, unless someone could tell me how to get other info (motherboard, video card, etc).

Here is the crash dump log (Had to break it into two files). I tried to get the system health report, but I couldn't get it to work.

A:BSOD-Driver Power State Failure

Hello and welcome to TSF.

Bugcheck 0x9F pointing to o2sdx64.sys:
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Devin\AppData\Local\Temp\Rar$DI00.226\Mini101509-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18005.amd64fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0xfffff800`0221e000 PsLoadedModuleList = 0xfffff800`023e2dd0
Debug session time: Thu Oct 15 22:59:50.501 2009 (GMT-4)
System Uptime: 0 days 1:49:51.614
Loading Kernel Symbols
...............................................................
................................................................
.......................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**************************************************************************... Read more

Read other 6 answers
RELEVANCY SCORE 98

Good Morning.

? OS - Windows 7 Ultimate
? x86
? What was original installed OS on system? - win7
? OEM ver.
? Age of system (hardware) - About 4 month
? Age of OS installation - have you re-installed the OS? - About 3 month
? CPU - AMD Turion(tm) II P520 Dual-Core Processor, 2.3MHz, 2 Core(s), 2 Logical Processor(s)
? Video Card - ATI Mobility Radeon HD 5145
? MotherBoard - AMD. 785GX chipset
? Power Supply - Toshiba 100~240V


Sorry I'm not well English. I'm Thai

A:[BSOD] Driver State Power Failure

Hi -

Your Broadcom 802.11n Network Adapter named as the probable cause of several BSODs -

Code:

bcmwl6.sys Thu Aug 19 22:52:32 2010 (4C6DEDF0)

It needs to be updated from Toshiba - http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#

These drivers need to be updated -

Code:

aspi32.sys Wed Jul 17 11:53:00 2002 (3D3592DC) - Adaptec CD burning - http://www.adaptec.com/en-US/downloads/

TVALZ_O.SYS Thu Nov 08 22:07:46 2007 (4733CF02) - TOSHIBA ACPI-Based Val. driver - http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#

tosrfec.sys Mon Oct 23 03:32:19 2006 (453C7003) - Toshiba Bluetooth USB Controller driver - http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#


This driver used by Daemon Tools/ Alcohol 120 is notorious for causing BSODs -

Code:

sptd.sys Wed Apr 07 21:28:24 2010 (4BBD3138)

Remove the offending app.

If BSODs persist, run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Mon Oct 18 22:26:55.043 2010 (GMT-4)
System Uptime: 0 days 0:30:06.635
*** WARNING: Unable to verify timestamp for bcmwl6.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl6.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 2 answers
RELEVANCY SCORE 98

? OS - Vista/ Windows 7 ? Windows 7 Home Premium
? x86 (32-bit) or x64 ? 32-bit
?What was original installed OS on system? Yes.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Factory installed.
? Age of system (hardware) 15 months.
? Age of OS installation - have you re-installed the OS? Haven't reinstalled.
? CPU Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (2 CPUs), ~2.0GHz
? Video Card NVIDIA GeForce GT 130M
? MotherBoard Mobile Intel(R) 4 Series? I'm unsure of how to find this information.
? Power Supply - brand & wattage Unsure about this as well.
? System Manufacturer MSI
? Exact model number (if laptop, check label on bottom) MS-1722

Hello, I've been having some problems with recent random BSODs. I had the same problem several months ago, but it went away on it's own. If you could give me any ideas on what's up and how we can fix it, I'd really appreciate it. Thank you!

A:BSOD: Driver Power State Failure?

Please uninstall Daemon Tools as it's sptd.sys driver is known to cause BSOD's on Win7 systems. Then use this free tool to ensure that the offending sptd.sys driver is removed from the system: DuplexSecure - FAQ

The BSOD's blame o2sd.sys - a component of your Memory Card Reader software by O2Micro. Please download and install this driver to see if that fixes the problem: MSI Global ? Download Center
Also, please take care of these:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5) - Windows Update will take care of this if it's available
speedfan.sys Sun Sep 24 09:28:47 2006 (4516880F)
giveio.sys Wed Apr 03 22:33:25 1996 (316334F5)
dump_iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
LMouFilt.Sys Tue Aug 24 1... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi. Im having a problem with my computer. The last few days I have been having a new BSOD problem. I have been getting a driver power state failure for a while and I had it fixed but when I updated my graphics card drivers it started again and I cant figure out why. Any help would be much appreciated.

A:BSOD Driver Power State Failure

Welcome to the forum.

Based on the bugcheck, I would recommend you follow and complete the steps given below:





Quote:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot o... Read more

Read other 1 answers
RELEVANCY SCORE 98

OS: Win7 Pro-N x64 SP1. I do not know if there was ever another OS on this machine.

Age of system unknown. CPU is an Intel Core2 Quad Q9450, 2.66GHz. I have not reinstalled the OS, and it is unknown when the OS was last installed/repaired/reinstalled. Video card is currently an NVidia GeForce 8400 GS; it used to be an ATI Radeon HD 3650, but that board gave out and was replaced a few months before this problem started happening. MB is an Intel chipset, I don't recall the specific make/model. The computer is a custom build, so no overall manufacturer.

I seem to have a common problem; Windows 7 will take a very long time (10-20 minutes) to shut down or restart, and will eventually fail with a DRIVER_POWER_STATE_FAIL BSOD. After the dump, Windows starts right back up and shows the domain login screen. After entering credentials, there is another long wait before the desktop displays.

A:BSOD - Driver Power State Failure

Hi and Welcome to TSF

Did you install Fresh OS since the motherboard has been replaced?

When you replace a motherboard you need to install Fresh OS on the Hard Drive with the right drivers for the current motherboard

Read other 3 answers
RELEVANCY SCORE 98

Hey all, I'm new here, with a BSOD problem.

I have a laptop, HP dv6t Select Edition (LT070AV), I'm running Windows 7 x64 Home Premium, SP1 (came pre-installed). Just got the laptop late November, haven't reinstalled the OS, yet. The CPU is an Intel i5-2410M @ 2.3Ghz, and I have Intel HD Graphics (Integrated). The BSOD is DRIVER POWER STATE FAILURE, and this is probably the third time this has happened to this computer. This happened when I told the laptop to go to sleep, and the screen turned off, but the light around the mousepad, and the power button light were still on. I left the house, and came back to a BSOD. The 'not going to sleep' thing has happened many more times, but I usually just lose patience after about 3 minutes and force-shutdown. Any help would be appreciated! The zipped "Windows7_Vista_jcgriff2" folder is attached.

A:BSOD (DRIVER POWER STATE FAILURE)

I see that memory is being corrupted, but it's always the same 4 bits and it's always the same process. While I can't understand exactly what would cause it to corrupt those 4 bits exactly, I do have an idea that it might be your Broadcom Bluetooth driver. I see it's dated July 2010 so you'll want to go to the HP site and download any potential update for it that's present there. Note that it may be an item that's integrated into the motherboard, so if you can't find a bluetooth driver, look for chipset drivers instead.

Read other 4 answers
RELEVANCY SCORE 98

hi i have laptop model hp elite pro book 8460p Windows 7 Ent
i need help to resolve the Bsod Driver Power State Failure

Thank for the help

Read other answers
RELEVANCY SCORE 98

hello guys,

i ve had this problem for a few months. my ntb is not shutting down at all, and today appeared this BSOD (0x0000009f) for the first time. i m attaching the dump file to illustrate the problem. can anybody help? thnks

A:driver power state failure BSOD

The BSOD was caused by Asus Charger Driver and its Likely a BSOD cause Driver Reference Table

Code:
0: kd> !irp 86ec3640
Irp is active with 11 stacks 9 is current (= 0x86ec37d0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 8a173030 00000000 846825a0-8a2f0f40
\Driver\usbhub AiCharger
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 8a2f0e88 00000000 00000000-00000000 pending
\Driver\AiCharger
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 8a2f1030 00000000 00000000-00000000 pending
\Driver\usbccgp
Args: 00000000 00000001 00000001 00000000
[ 0, 0]... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi, I have a problem with a blie blue screen.
I have a Toshiba Satellite Vista 64 amd turion x2 with OEM software. I just did a full system restore, and still have the same issue of crashes. For a while it started with seeming to be hot, then turning off, now BSOD.
OS - Vista/ x64
? What was original installed OS on system? same
? OEM version (came pre-installed on system)
? Age of system (hardware) approx 4 years
? Age of OS installation - have you re-installed the OS? two days

? CPU amd turion x2 TL-6 2ghz
? Video Card not sure
? MotherBoard
<DEVICE><DESCRIPTION>System board</DESCRIPTION><HARDWAREID>ACPI\PNP0C01</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID>
? Power Supply - brand & wattage

? System Manufacturer toshiba
? Exact model number (if laptop, check label on bottom) p305d s8995e

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800613E050
BCP3: FFFFFA80062CF060
BCP4: FFFFFA80050804C0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini121211-03.dmp
C:\Users\Ed\AppData\Local... Read more

A:bsod driver power state failure

ati radeon video card x1250 8.401.0.

Read other 10 answers
RELEVANCY SCORE 98

I've been getting a blue screen for the past week now every time my computer goes to sleep with the Driver Power State Failure message. I've done a lot of research and can see that this is likely due to a faulty driver that isn't updated, and since Windows Update has recently been doing a lot of updating I suspect this is the case. I just need to know which driver is causing the problem. More info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006B26060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA80099CC970
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\101613-28048-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-207403-0.sysdata.xml

A:Driver Power State Failure BSOD

   Warning
Edit: Please follow Arc's instructions first
Welcome to the Forum.

Check for an update on the driver below:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800708fa10, fffff80000b9c518, fffffa8006ea7bd0}

Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800708fa10, Physical Device Object of the stack
Arg3: fffff80000b9c518, nt!TRIAGE_9F_POWER on Win7, otherw... Read more

Read other 3 answers
RELEVANCY SCORE 98

Atleast once a day i get the BSOD. Usually It will crash while im playing a game. I have attached an SFdebugfiles zip i hope this will help to resolve my issuse.

A:BSOD Driver Power State Failure

Hi Crinall & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sun Aug 24 07:36:48.770 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001987d5880, fffff801244d1930, ffffe001987e5b00}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Aug 23 05:28:42.138 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001b5dee060, ffffd001dddc6930, ffffe001b5dd6010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

???????????????????????????... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi, all I just clean installed Windows 7 Ultimate 32bit on my Dell Vostro 1310 with 3gb ram, 1.8gHz Core2Duo, and 250gb hd. However I am getting BSOD stating driver power state failures, the computer will power up and work fine for about 20-mins then it will crash like clock work.
I do not have any exclamation marks in the device manager, I have update all my drivers with the latest and greatest Vista 32bit drivers from Dell as that is all they have right not, and I even updated the bios.
I tried to analyze the dump files myself but every time I attempt to install the debugging software it hangs at the progress bar until it becomes unresponsive then eventually crash the system. I have attached a dump file for review, if someone is willing to help me out.
Thanks

A:BSOD Driver power state failure

The OS becomes exasperated because the combination of the disk hardware and the drivers responsible for controlling it are taking too long to deal with a power state transition.

Try to update this driver...

iaStor Fri Jul 13 08:59:22 2007

... and get rid of this one:

SiWinAcc Tue Nov 02 06:21:31 2004

Ultimately, if the problem is not caused by a driver, the disk hardware itself may be suspect. Hopefully it's a driver!

In the short term, you may be able to work around the issue by disabling all power management - set everything to run at 100% constantly.

-----------------------------------
EDIT: BTW, the "do you have question marks in devmgmt.msc?" line of BSOD troubleshooting is a waste of time. The one thing you can pretty much rule out as the cause of a BSOD is the lack-of-driver for a device which hasn't been detected and enabled.

Read other 5 answers
RELEVANCY SCORE 98

Howdy

So I'm getting the driver state power failure BSOD as well. This computer used to be Vista, about a month ago I put Windows 7 on here. It worked great for like 3 weeks but now its giving me this BSOD every 1-2 days, starting May 7th. It happens randomly - the only constant is that I've had firefox open but I don't know if that really has anything to do with it.

I did look into this before posting here, but it seems like basically everybody's is for different reasons so I'm not sure what to do.

I've attached the latest memory dump file from today.

Any help would be greatly appreciated!

A:BSOD - Driver State Power Failure

dmp points to atapi.sys. Please run a system files check:


Quote:




Open an elevated command prompt and enter sfc /scannow.




Update or remove these old drivers or their respective programs:

Code:
fffff880`0443b000 fffff880`0459f400 RTKVHD64 RTKVHD64.sys Mon Jun 02 06:11:37 2008 (4843C759)
fffff880`02d5d000 fffff880`02d76000 SCDEmu SCDEmu.SYS Fri Oct 31 02:56:21 2008 (490AAC15)
fffff880`04fa2000 fffff880`04ff8000 SynTP SynTP.sys Thu Mar 27 21:15:32 2008 (47EC46B4)
You may also try a repair install.

Please upload any new dmps that might come.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Jonathan\AppData\Local\Temp\Temp1_051510-21528-01.zip\051510-21528-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00ba2730?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sat May 15 21:55:53.880 2010 (GMT-4)
System Uptime: 2 days 11:35:38.626
Loading Kernel Symbols
.................... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello guys,

I have seen lot of topics with the same subject as I have, but as I understand each of them is "special", so I am posting new one.

Sometimes when I restart / shut down my computer, it is turning off for few minutes (10 - 20m) and then I can see BSOD.
Last one was with Driver Power State Failure message - 011510-17128-01.zip minidump.
I have also few more minidumps - Minidump.zip (but I think almost all are with the same message)
I don?t know how to read it, so please, can someone check it and help me?

I have Acer Aspire 3694, Win7

Thank you very much for help

A:Driver Power State Failure BSOD

Most probably this is due to your Deterministic Network Enhancer Miniport or Cisco Systems VPN Client (dne2000.sys). Also, please note that the dne2000.sys file is listed below as being older. Also, this could be due to the other, network related drivers in the list below.

Please:
- download a new copy of the Win7 drivers for the Cisco VPN Client device
- uninstall the current copy from your system.
- install the freshly downloaded copy
- wait for further BSOD's.

Also, Please update or remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager. Please use the following instructions to locate the most current drivers:





Quote:
How To Find Updated Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- some driver links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers:

Code:
bcm4sbxp.sys Tue Nov 21 07:25:43 2006 - Broadcom 440x 10/100 Integrated Controller XP Driver by Broadcom Corporation (Broadcom.com - Home).
CVP... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???

A:Driver power state Failure BSoD

  
Quote: Originally Posted by wolfinhu


Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???



Hi and welcome

these crashes were caused by nvm62x64.sys part of your nvidia fforce hardware firewall.

I would remove it to test and put something else back later

Let us know if you need help

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder (3)\030910-24507-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02817000 PsLoadedModuleList = 0xfffff800`02a54e50
Debug session time: Tue Mar 9 00:23:34.636 2010 (GMT-4)
System Uptime: 0 days 23:09:45.039
Loading Kernel Symbols
...............................................................
.... Read more

Read other 2 answers