Over 1 million tech questions and answers.

Mouse NOT regconized by computer after a few minutes and event ID 20001 and 20003 appear in Event Log

Q: Mouse NOT regconized by computer after a few minutes and event ID 20001 and 20003 appear in Event Log

I have a computer with windows 7. Last week, i bought a a4tech n-500f mouse and plugged into my computer. On the first day, it was working fine. But 1 day later, when i was using the computer with no special activity (just browsing the web), the pointer
won't move anymore. I plugged in an old mouse (the one that i was using before get the new mouse), and it was working fine. I went to the device manager, it says there is only one mouse plugged into my computer. I left the new mouse there, after about half
of a day, restarted my computer and when the login screen showing up, the new mouse was working again, but only for a few minutes. This problem appears everyday. I went to event viewer to check what is happening, it shows these event ID 20001 and 20003:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events/event">" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events/event">" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events/event">


-
<System>


<Provider
Name="Microsoft-Windows-UserPnp" Guid="{96F4A050-7E31-453C-88BE-9634F4E02139}" />


<EventID>20003</EventID>


<Version>0</Version>


<Level>4</Level>


<Task>7005</Task>


<Opcode>0</Opcode>


<Keywords>0x8000000000000000</Keywords>


<TimeCreated
SystemTime="2011-04-18T10:09:54.851137900Z" />


<EventRecordID>90721</EventRecordID>


<Correlation
/>


<Execution
ProcessID="3204" ThreadID="2128" />


<Channel>System</Channel>


<Computer>Ultimate</Computer>


<Security
UserID="S-1-5-18" />

</System>



-
<UserData>


-
<AddServiceID xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events"" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events"" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events"" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2004/08/windows/userpnp">" target="_blank" class="wLink">http://manifests.microsoft.com/win/2004/08/windows/userpnp">" target="_blank" class="wLink">http://manifests.microsoft.com/win/2004/08/windows/userpnp">" target="_blank" class="wLink">http://manifests.microsoft.com/win/2004/08/windows/userpnp">


<ServiceName>mouhid</ServiceName>


<DriverFileName>system32\DRIVERS\mouhid.sys</DriverFileName>


<DeviceInstanceID>HID\VID_09DA&PID_C20A&MI_01&COL01\7&35D695E9&0&0000</DeviceInstanceID>


<PrimaryService>true</PrimaryService>


<UpdateService>true</UpdateService>


<AddServiceStatus>0</AddServiceStatus>

</AddServiceID>


</UserData>


</Event>

--------------------------



-
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">


-
<System>


<Provider
Name="Microsoft-Windows-UserPnp" Guid="{96F4A050-7E31-453C-88BE-9634F4E02139}" />


<EventID>20003</EventID>


<Version>0</Version>


<Level>4</Level>


<Task>7005</Task>


<Opcode>0</Opcode>


<Keywords>0x8000000000000000</Keywords>


<TimeCreated
SystemTime="2011-04-18T10:09:55.106152400Z" />


<EventRecordID>90722</EventRecordID>


<Correlation
/>


<Execution
ProcessID="3204" ThreadID="2128" />


<Channel>System</Channel>


<Computer>Ultimate</Computer>


<Security
UserID="S-1-5-18" />

</System>



-
<UserData>


-
<AddServiceID xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2004/08/windows/userpnp">


<ServiceName>mouclass</ServiceName>


<DriverFileName>system32\DRIVERS\mouclass.sys</DriverFileName>


<DeviceInstanceID>HID\VID_09DA&PID_C20A&MI_01&COL01\7&35D695E9&0&0000</DeviceInstanceID>


<PrimaryService>false</PrimaryService>


<UpdateService>true</UpdateService>


<AddServiceStatus>0</AddServiceStatus>

</AddServiceID>


</UserData>


</Event>
-----------------------------


-
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">


-
<System>


<Provider
Name="Microsoft-Windows-UserPnp" Guid="{96F4A050-7E31-453C-88BE-9634F4E02139}" />


<EventID>20001</EventID>


<Version>0</Version>


<Level>4</Level>


<Task>7005</Task>


<Opcode>0</Opcode>


<Keywords>0x8000000000000000</Keywords>


<TimeCreated
SystemTime="2011-04-18T10:09:55.442171700Z" />


<EventRecordID>90723</EventRecordID>


<Correlation
/>


<Execution
ProcessID="3204" ThreadID="2128" />


<Channel>System</Channel>


<Computer>Ultimate</Computer>


<Security
UserID="S-1-5-18" />

</System>



-
<UserData>


-
<InstallDeviceID xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2004/08/windows/userpnp">


<DriverName>FileRepository\msmouse.inf_x86_neutral_7a9084e0177406eb\msmouse.inf</DriverName>


<DriverVersion>6.1.7600.16385</DriverVersion>


<DriverProvider>Microsoft</DriverProvider>


<DeviceInstanceID>HID\VID_09DA&PID_C20A&MI_01&COL01\7&35D695E9&0&0000</DeviceInstanceID>


<SetupClass>{4D36E96F-E325-11CE-BFC1-08002BE10318}</SetupClass>


<RebootOption>false</RebootOption>


<UpgradeDevice>false</UpgradeDevice>


<IsDriverOEM>false</IsDriverOEM>


<InstallStatus>0x0</InstallStatus>


<DriverDescription>HID-compliant mouse</DriverDescription>

</InstallDeviceID>


</UserData>


</Event>
-------------------------------------------


-
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">


-
<System>


<Provider
Name="Microsoft-Windows-UserPnp" Guid="{96F4A050-7E31-453C-88BE-9634F4E02139}" />


<EventID>20003</EventID>


<Version>0</Version>


<Level>4</Level>


<Task>7005</Task>


<Opcode>0</Opcode>


<Keywords>0x8000000000000000</Keywords>


<TimeCreated
SystemTime="2011-04-18T10:09:56.789248700Z" />


<EventRecordID>90724</EventRecordID>


<Correlation
/>


<Execution
ProcessID="3320" ThreadID="2856" />


<Channel>System</Channel>


<Computer>Ultimate</Computer>


<Security
UserID="S-1-5-18" />

</System>



-
<UserData>


-
<AddServiceID xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2004/08/windows/userpnp">


<ServiceName>kbdhid</ServiceName>


<DriverFileName>system32\DRIVERS\kbdhid.sys</DriverFileName>


<DeviceInstanceID>HID\VID_09DA&PID_C20A&MI_00\7&11FF5827&0&0000</DeviceInstanceID>


<PrimaryService>true</PrimaryService>


<UpdateService>true</UpdateService>


<AddServiceStatus>0</AddServiceStatus>

</AddServiceID>


</UserData>


</Event>
--------------------------------------


... and something like that. At the time when the new mouse stopped working, it's also when these event created in the event log.
Help me? Is it a computer problem or hardware problem?
(sorry for bad english)

RELEVANCY SCORE 200
Preferred Solution: Mouse NOT regconized by computer after a few minutes and event ID 20001 and 20003 appear in Event Log

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Mouse NOT regconized by computer after a few minutes and event ID 20001 and 20003 appear in Event Log

Hi,
According to the Event log, it indicates that the driver installation and accompanied service installation is successful.
So I assume that this issue may be caused by the communication between mouse and computer. the communication is unstable or the mouse is broken.
Please contact the manufacturer for assistance.
Also, you may plug the mouse in another computer or test it in Safe Mode.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 2 answers
RELEVANCY SCORE 102.8

user pnp
Driver Management concluded the process to install driver tpfilter.inf_amd64_5eebe62b01d46a9a for Device Instance ID ACPI\MSFT0003\4&18835692&0 with the following status: 0x0.

Read other answers
RELEVANCY SCORE 86.8

Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

Any ideas?
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
<EventRecordID>39029</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>M... Read more

A:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

Memory exception but we need to examine the DMP files to find out why.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

Read other 9 answers
RELEVANCY SCORE 85.2

Issue - computer locks up with only the mouse working every 40-45 minutes. I have to do a cold reboot to get the system up again. If I run the computer for 20 minutes and then shut down, let it sit, then start up again, it will crash in 20. Seems time dependent rather than heat or activity based. The issue occurs when browsing the internet, watching video, playing games, or just being in screensaver. No blue screen error. No information in the event logs. Has been happening for a month. No big changes to the system before it started.

Running Windows 10. i7-2600K CPU. 16GB Ram. OS on 200GB SSD. Secondary hard drive is conventional WD 1TB. Nvidia GTX 970. Computer is about 4-5 years old.

When the crash happens, nothing is written to the event log or to the memdump file of use. It just lists that the computer has been restarted with a cold boot.

I ran memtest86 - no issues. Also ran HD Tune Pro - no issue found with the SSD. It says read failure/1 unstable sector for the secondary drive. The Western Digital tool finds 1 bad sector on the secondary drive, but SMART status is PASS. Quick Test fails - failed read test element. Windows ChkDsk cannot see the issue with the secondary drive.

Updated drivers for video card and sound card. Motherboard bios are up to date.

Unplugging the secondary hard drive does not fix the issue. All fans are working.

Yesterday I did a Windows 10 reset. The problem is still happening.

Is there anything else I can try to identify the source of the... Read more

Read other answers
RELEVANCY SCORE 82.4

I have hundreds of these errors for event id's 1026,1049 and 1059, I have searched and cannot find anything remotely associated with these errors or the cause of them:

The description for Event ID 1026 from source Internet Explorer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
 
If the event originated on another computer, the display information had to be saved with the event.
 
There all have the same information and event log online help does not "help" , any ideas?

A:Event ID 1026 ,Event ID 1049 and Event ID 1059

I think Iv'e answered my own question:
 
http://msdn.microsoft.com/en-us/library/dd565636(v=vs.85).aspx error 1059
http://msdn.microsoft.com/en-us/library/dd565650(v=vs.85).aspx error 1049
http://msdn.microsoft.com/en-us/library/dd565667(v=vs.85).aspx error 102
Would someone be able to check this is correct?
 
thanks very much

Read other 3 answers
RELEVANCY SCORE 82.4

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

A:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

Read other 1 answers
RELEVANCY SCORE 79.2

Not sure when this started but I wanted to check out a problem on this system and when I went to do some filtering on the event logs the Event Sources section was empty. I can filter by event level, I can filter by Event IDs but if I try any of the drop
downs, Event sources or Keywords the lists are blank.

Any suggestions?
Peter

Read other answers
RELEVANCY SCORE 75.6

friends I need a little guidance here. I seem to have one ill-behaved app that is causing an error 10016 every 10 minutes. Reading around about similar, it seems to be resolvable either by reassigning some path variables or by fixing a permissions issue.

Below I'm pasting one of the error logs - they are all identical - I've done that check so no point cluttering the thread with redundant log entries.

thanks for any guidance you can offer -

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 12/18/2012 10:31:59 AM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: Samwise-PC
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
and APPID
{344ED43D-D086-4961-86A6-1106F4ACAD9B}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10016</EventID>
<Version&g... Read more

A:Event id 10016 every 10 minutes; how to resolve pls?

You may try it: Event ID 10016

BTW, what antivirus do you use?

Read other 9 answers
RELEVANCY SCORE 74.8

hi gang
I get this identical [other than timestamp] event Error [red] in my sys log at exact 10 minute intervals.
can someone tell me how to run down the appid to see if its a program that I don't need? or otherwise run the permissions or path or whatever error and resolve? I have a cbs.log if that will help.

this is the event, and as said I have checked all the detail on each one that logs and the detail is identical:

thanks
z

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 12/18/2012 10:31:59 AM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: Samwise-PC
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
and APPID
{344ED43D-D086-4961-86A6-1106F4ACAD9B}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords&g... Read more

A:Event 10016 every 10 minutes - one appid ?? need assist

check your security permission settings for the applications are enabled
 

Read other 1 answers
RELEVANCY SCORE 74.8

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

Read other 3 answers
RELEVANCY SCORE 74.8

Hi, all. I have been trying to figure out a serious of issues that my PC has been having. It's possible they were caused by poorly seated RAM, but the RAM seems to check out now. There is a whole slew of details on the case here: TechNet with a lot more information that will be of help, including posted evtx files. I have always gotten great help here, though, and am in dire need of a second opinion, so I thought I would check with this forum's experts.Here is the basic gist, although there is a ton more detail on the other link:Since building this machine, I've had frequent BSODs, often seemingly-related to middle of the night MSE updates, or possibly other windows updates. These always required a System Restore to recover from, as Windows was unbootable. Often it said the Restore failed, but it seemed to resolved the bootability issue at least.I have removed MSE and reseated some RAM that initially tested poorly, but which now seems to be passing MemTest no problem.I still have a series of issues that occur, and the one that was causing noticeable issues was SuperFetch causing sysmain.dll to fault (Event 1000, posted below) on every boot and periodically throughout the day. I have disabled SuperFetch, which stopped the issue from happening every boot, but it still happens occasionally, so it seems SuperFetch is but one trigger.The other most common error I have is Event 55 (posted below), possibly related to Windows Backup and/or System Restore, which seems ... Read more

Read other answers
RELEVANCY SCORE 74.8

duct: .NET Framework; Version: 2.0.50727.8670; Event ID: 0;
Event Source: TOASTER.EXE;


 

Read other answers
RELEVANCY SCORE 74.8

Description:
Error code 100000d1, parameter1 00000060, parameter2 00000002, parameter3 00000000, parameter4 ba60578c.

For more information, see Help and Support Center at
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 36 30 2c 20 000060,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 62 61 36 30 00, ba60
0050: 35 37 38 63 578c

Some body can help me ?
 

A:Random restarts Source:System Error Event Category: (102) Event is 1003

Inside the 1 MiniDump:




BugCheck 100000D1, {60, 2, 0, ba60578c}
Probably caused by : nvata.sys ( nvata+1378c )Click to expand...

Uninstall the nvidia drivers from the control panel
Download and install the latest drivers
 

Read other 2 answers
RELEVANCY SCORE 74.8

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

A:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 7 answers
RELEVANCY SCORE 74.8

I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.

I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Re: LoadPerf 3011, 3012
Hi-
I had the same problem with LoadPerf and here is what I found out:
All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).

The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.

User Action
To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
The contents of the string tables are automatically rebuilt.

I hope this helps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.

Here are the screenshoots of my two errors.

A:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

Rebuilding the string tables as outlined in my first post fixed the problem.

Read other 1 answers
RELEVANCY SCORE 74.8

Hi,

I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

... Read more

A:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

Read other 2 answers
RELEVANCY SCORE 74.8

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

Read other answers
RELEVANCY SCORE 74.8

i have been having this error for a couple days now and it also seems to be associated with another crash im getting from a game i play also.

first one is a memory dump blue screen issue and the other is just the game crashing.


Script:



Log Name:      Application
Source
:        Microsoft-Windows-WMI
Date
:          1/17/2015 10:53:52 AM
Event ID
:      10
Task Category
None
Level
... Read more

A:Event ID 10 — Event Filter Query Functionality CAUSING BLUE SCREEN

Still nothing responded on this.

Read other 1 answers
RELEVANCY SCORE 74.8

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

A:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

Read other 4 answers
RELEVANCY SCORE 74.8

Hi people,
I have setup a disk quota usage for the user "tester" 
50mb = warning level
100mb = Quota limit
When I generated a file of > 50mb then I see well a event
Level,Date and Time,Source,Event ID,Task Category
Information,23-09-16 15:10:24,Ntfs,36,(2),A user hit their quota threshold on volume C:.
when I try put a second file of more than 50mb also, first i'm block to copy it (good) and then i receive well then related event
Level,Date and Time,Source,Event ID,Task Category
Information,23-09-16 15:10:38,Ntfs,37,(2),A user hit their quota limit on volume C:.
so I erase the files and try again, and then nothing in the event log !
I have try : restart the quota management, to pout other limit for that user, to disable then enable again limitation for this user without success ! once the event 36 & 37 appear it seem that he never appear again even if a warning, limit is triggered
again...

any idea... ?

Read other answers
RELEVANCY SCORE 74.4

The exact details are Log Name:      Application
Source:        SideBySide
Date:          9/23/2015 1:28:53 PM
Event ID:      80
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Angela-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Slingplayer Desktop\Slingplayer Desktop.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component
version already active. Conflicting components are:. Component 1: C:\windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757.manifest. Component 2: C:\windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_41e855142bd5705d.manifest.

if someone can help with this error in my event log i would be so grateful.

Read other answers
RELEVANCY SCORE 74.4

received three error codes in a row with the following error message:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk, what do i do i need help please.........
HP,WINDOWS 7 HOME PREMIUM
 

A:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk

Read other 11 answers
RELEVANCY SCORE 74.4

when I run reboot stress test at Intel platform with win10 Desktop RS1 version, after some cylces test, XHCI controller show yellow bang. Event viewer showed that event id is 14.  I want to know the indication of
StartDeviceFailReason equals 3. I cannot find more info about this failure from website.Thanks a lot!









-

Provider











[
Name]
Microsoft-Windows-USB-USBXHCI










[
Guid]
{30E1D284-5D88-459C-83FD-6345B39B19EC}




















EventID
14



















Version
0



















Level
2



















Task
0



















Opcode
0



















Keywords
0x8000400000000000

















-

TimeCreated











[
SystemTime]
2016-11-25T19:48:29.908393500Z




















EventRecordID
7099


















Correlation

















-

Execution











[
ProcessID]
4










[
ThreadID]
232




















Channel
System



















Computer
LAPTOP-QQEHB4HS

















-

Security











[
UserID]
S-1-5-18












-

EventData










fid_UcxController
0x187f9ddd64a8







... Read more

Read other answers
RELEVANCY SCORE 74.4

So basically my pc restarts whenever it wants its getting really annoying, it comes up with serious error and it either says its device drivers or ram, but ive tested my ram with the windows diag and mem test with no errors, and ive updated all my drivers, so im not sure, any help would be muchly appreciated,

this is from the event viewer, ill have to post a copy of my next serious error report and anything else that would be helpful, thanks and plz plz plz help


Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/21/2007
Time: 2:34:13 AM
User: N/A
Computer: EZMIKE
Description:
Error code 1000008e, parameter1 c0000005, parameter2 805607c5, parameter3 f3283a84, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 30 35 36 30 37 63 35 805607c5
0040: 2c 20 66 33 32 38 33 61 , f3283a
0048: 38 34 2c 20 30 30 30 30 84, 0000
0050: 30 30 30 30 0000
 

A:System Error - Event Category (102) - Event ID 1003 Windows OS

got these last 4 minidumps too
 

Read other 3 answers
RELEVANCY SCORE 74.4

After too many unexplained problems, I decided to reinstall Windows 8.1 Pro x64, and migrate off of SBS 2011 Standard. In addition to the primary workstation that can't read any event logs, I built five Server 2012 R2 servers (Hyper-V host, Active Directory
VM, Exchange 2013 VM, SQL Server 2014 VM, and WSUS VM).

I was diagnosing why my workstation's Outlook cannot reach the local Exchange Server.   I tried to look at the event logs, and found the
Event Viewer cannot open the event log or custom view.  Verify that Event Log service is running (it is) or the query is too long (whatever that indicates).  The request is not supported (50)
Looking at the directory of the event logs folder.  It appears that most logs are empty, which is understandable since it's a rebuilt installation.  I found a small number of Applications and Services Logs and it appears nothing was logged since
six days ago on 4/4/2016.   On support forums, I found many have this exact problem on Win 7, Win 8, and Win 10.  Of the solutions posted none of them would even execute on my Win 8.1 Pro x64 machine.  I tried clearing the event logs (WEVTUTIL
CL logfilename) and am told Failed to clear log .... The request is not supported. 
It's very difficult to diagnose why Outlook 2013 cannot reach Exchange 2013, even if Outlook is installed on the Exchange server machine (just as a test).  The web-based Outlook owa, ecp, ... all work fine. ... Read more

Read other answers
RELEVANCY SCORE 74.4

Dear Team,
We are upgrading from windows 2008 to 2016 all the Domain controllers, DFS and File servers, 
We are actively monitoring the following events if triggered through OMI monitoring.
I am trying to find the equivalent events for Windows 2016 OS, the below mentioned are for windows 2008 OS.
Please let me know where I can get those or is the event IDs are same for windows 2008 & 2016?
Event ID: 58, 4657, 127
1063
14553
14534
5002
5008
5012
5014
55
2001
13552
13555
13508
2213
1058
7017
4612

Read other answers
RELEVANCY SCORE 74.4

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

Read other answers
RELEVANCY SCORE 74.4

I have consistently recieved this error "Event 137 Kernel-Power" message in Event Viewer when I place my X1E into sleep via the Fn-4 key method: "The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance." I don't notice anything in performance or other adversity but thought the Lenovo firmware engineers should be aware of this event. I am running UEFI Firmware 1.17 and Windows 10 Version 1809.

Read other answers
RELEVANCY SCORE 74.4

I am getting this error any a lot of machines. What happens is it will get tons of EVENT ID 7009 and 7000. This will continue until the system crashes completely. Below are some of the event log errors that happen. The 7009 and 7000 happen every minute. 
EVEN ID 10005 DCOM got error "1053" attempting to start the service VSS with arguments "" in order to run the server:
{E579AB5F-1CC4-44B4-BED9-DE0991FF0623}

EVENT ID 10010 The server {1F87137D-0E7C-44D5-8C73-4EFFB68962F2} did not register with DCOM within the required timeout. 
See attached picture 

Knowledge is Power.

Read other answers
RELEVANCY SCORE 74.4

no info comes up with diagnosis/analysis for this URGENT item in Event Log...was directed to you for further assistance.      Add'l/same problem w/Event ID 100. Please advise ASAP?  Tnx, Karen

 

Read other answers
RELEVANCY SCORE 74.4

It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there.

I had this issue before and we found out that the motherboard was causing the issue. I have also replaced my video card and added additional memory and expanded to 16gb. Before, I only have 8gb.

Ran sfc/scannow with no errors found. Going to do chkdsk as well.

It's strange because this does not happen at all when I'm playing online games or even just standard browsing. It's when I play videos on youtube that there would be instances where this would happen. There are other times where I can view them without any issue at all.

Any ideas would be great.

Also, how can I attach the windows DMP file to scale it down as it is just really large?

Thanks again guys.

A:BSOD when watching videos on youtube, Event 41 in Event Viewer

Hello Santos, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 9 answers
RELEVANCY SCORE 74.4

System event not recording anything. It is empty, says "date is invalid(13)".

I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

hp pavilion dv9000
OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
SMBIOS Version 2.4
Installed Physical Memory (RAM) 2.00 GB
Adapter Type GeForce 8400M GS, NVIDIA compatible
Adapter Description NVIDIA GeForce 8400M GS
Adapter RAM 128.00 MB (134,217,728 bytes)
 

A:Solved: Vista, Event Viewer - system event log not recording

Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
 

Read other 2 answers
RELEVANCY SCORE 74.4

Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years.

Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied.

I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free).

Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect.

Event ID 7000:

The IPsec Policy Agent service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

When I checked the windows services table, I noticed that IPsec has in fact been started but probably not in a timely fashion. How do I get rid of these 3 annoying errors although I don't notice any performance problems in my laptop?

Thanks in advance for your help.

A:Three event errors on bootup: Event ID 7006, 7000 and 7009

Hi Atom.

"Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied."

These events are normal because of Panda Cloud Antivirus' self-protection feature.

"Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect."

Follow the instructions from here:

Event ID 7009 — Basic Service Operations

You can put new value as 60000 instead of 30000.

The Event ID 7000 should disappear when you boot your laptop next time.

Hope this helps.

Read other 1 answers
RELEVANCY SCORE 74.4

Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould I do? Reinstall VAIO-care or WHAT else? Please help me!!!!! Well, I can say that before of all, I tryed to install vopt, latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features....but I can see several error in event viewr such as Event 11706, MsInstaller >>>> Product Vaio Media Plus -- Error 1706 - An instalation for the product Vaio Media Plus cannot be found. Try the installation again using a valid copy of the instalation package 'VMP VEPMMx64.msi'. So should I reinstall all vaio care or not................!!! By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care..........................................What to do? can you figure out what going on.................!!!

A:Event Viewer Event Id 2002, Source: EapHost, Log Application

Welcome to the forums Marioo!

Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

SFC /SCANNOW Command - System File Checker

Read other 5 answers
RELEVANCY SCORE 74.4

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

Read other 19 answers
RELEVANCY SCORE 74.4

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

A:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

Read other 3 answers
RELEVANCY SCORE 74.4

Good Evening,

My PC is steadily failing with a variety of blue screen errors -

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 07/10/2010
Time: 00:06:29
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 1000000a, parameter1 806f8360, parameter2 000000ff, parameter3 00000008, parameter4 806f8360.

Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 30 eters 80
0030: 36 66 38 33 36 30 2c 20 6f8360,
0038: 30 30 30 30 30 30 66 66 000000ff
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 38 2c 20 38 30 36 66 08, 806f
0050: 38 33 36 30 8360

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 06/10/2010
Time: 22:23:54
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 10000050, parameter1 e4733000, parameter2 00000000, parameter3 80582627, parameter4 00000001.


Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 10... Read more

A:System Error - Event Category (102) - Event ID 1003 Windows OS

are these errors occurring out of the blue or do they happen when you run certain things? did you recently install new drivers or updates? posting the full specs of your machine and which operating system would also be helpful.
 

Read other 5 answers
RELEVANCY SCORE 74

Hi,

I just replaced a motherboard, cpu and heatsink 3 days ago.

First post failed, computer fans ran, but the display was dark. Replaced PSU with an older one I had lying around. POSTed. Build-in network NIC didn't work, added a PCI one, finally got it to work with bunch of driver pains. Then the computer crashed and wouldn't POST. I thought must be the PSU cuz it was old. So, went out and bought a brand new EVGA 750. Worked like a champ. Then it crashes every 15 to 20 minutes with the Event Log 41 - kernel power. Everytime. I tried everything. First, there was 2 audio drivers, so I removed one. Did the MSSE thingy by removing the OOBE file. Updated all the drivers. Still crashes every 15 to 20 minutes no matters how busy the computer is.

I tested the system with CPUID HWInfo and the system is cool, nothing above 100 degree F except the GPU that hovers around 110. Ran MS memtest and passed. Everything works great and fast when it is running and then boom! Crash.

So, any help would be appreciated. Here is the file from the SF_Diagnostic_Tool. Only thing is I can't get a memory dump after these crashes, I've tried them all and nothing. I'm at a lost what to do. Thank you.

A:Random crashes every 15 to 20 minutes - Kernel Power - Event Log 41

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 2 answers
RELEVANCY SCORE 73.6

Hello, I recently tried to filter events of the .NET runtime provider by their event ID. This should be accomplished through enabling the .NET runtime provider with
EVENT_FILTER_TYPE_EVENT_ID flag being set in the EVENT_FILTER_DESCRIPTOR structure, unfortunately the
EnableTraceEx2 function returns 87. If I try to enable the provider with the
EVENT_FILTER_TYPE_SCHEMATIZED flag instead of the EVENT_FILTER_TYPE_EVENT_ID, the provider gets enabled so I came to the conclusion that the
EVENT_FILTER_TYPE_EVENT_ID is the invalid parameter.

Enabling the session:
The LogFileMode member of the EVENT_TRACE_PROPERTIES
structure is set to EVENT_TRACE_FILE_MODE_CIRCULAR, EVENT_TRACE_PRIVATE_LOGGER_MODE
AND EVENT_TRACE_PRIVATE_IN_PROC (<- supports this mode scoped filters?).

According to
MSDN enabling scoped filters should be possible for private logging mode sessions or am I missing something?


Useful MSDN links:

Logging Mode ConstantsEVENT_TRACE_PROPERTIES structureSystem Error CodesEVENT_FILTER_DESCRIPTOR structure including filter typesWhat's New in Event Tracing (includes scoped filter availability statement)

Read other answers
RELEVANCY SCORE 73.6

Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

A:Event Viewer Error Message Event ID10 - How to get rid of it?

idahosurge,
Read through the link below...
Hope it helps with your problem.

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

Read other 5 answers
RELEVANCY SCORE 73.6

Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are:

Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.

This is listed under AppInit_DLLs in the registry and the dll being loaded is nvinitx.dll, from what I can find out this has to do with the optimus function on my laptop and having it loaded is okay. I just want to get rid of the error message being logged everytime I boot.

A:Event Viewer Error Message Event ID11 - How do I get rid of this to?

Does anyone have any ideas on how to get rid of this error message in Event Viewer?

Read other 2 answers
RELEVANCY SCORE 73.6

Hi...
Have an issue I've been dealing with for several weeks.  I have a standalone system that certain event IDs such as 4647 and 4634 and others are not populating in the security log.  Success and failures is set in the Local Group Policy,
but they are not being logged.  Performed gpupdate after making changes, and scoured the internet for a solution.  Any ideas?  Was this an issue in the past that an MS patch corrected?  Thanks in advance for any suggestions!!

Read other answers
RELEVANCY SCORE 73.6

I am getting lots of critical errors in the event viewer. Event ID = 100, 200, 400, 307, 402.... (Below are the details for a couple of them). I have seen several posts on the web for this issue but no solutions. It seems to be an issue that affects a lot of vista installs on all different pc / laptops. I'm running an IBM (lenovo) T61 laptop. I don't know if these issues are related but frequently when I reboot the laptop it will hang during the boot up. When this happens I need to Hard Boot the laptop, I will then get the message that windows did not shut down correctly and asks to 1) run a repair restore or 2) boot window normal. Sometimes I need to do this several times before it will boot up. I?m afraid the day is coming where it will not boot up at all.

I would appreciate any information someone might have.

Thanks...

****Event ID = 200****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 1/26/2009 9:02:57 AM
Event ID: 200
Task Category: Shutdown Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxx
Description:
Windows has shutdown:
Shutdown Duration : 153587ms
IsDegradation : false
Incident Time (UTC) : 1/26/2009 3:17:21 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windo... Read more

A:Boot up Issues - Critical Event Log errors - Event ID = 100, 200, 400, 307, 402

Originally Posted by mehowe


****Event ID = 400****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 2/15/2009 9:51:42 AM
Event ID: 400
Task Category: System Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxxx
Description:
Information about the system performance monitoring event:
Scenario : System Responsiveness
Analysis result : Analysis could not be performed in time. There is a possible serious performance issue
Incident Time (UTC) : 2/15/2009 2:49:26 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
<EventID>400</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4005</Task>
<Opcode>37</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2009-02-15T14:51:42.799Z" />
<EventRecordID>1693</EventRecordID>
<Correlation ActivityID="{00000000-A6C8-0000-2155-6BAA7B8FC901}" />
<Execution ProcessID="2016" ThreadID="2216" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>xxxxx</Computer>
<Security UserID="S-1-5-19" />
&l... Read more

Read other 1 answers
RELEVANCY SCORE 73.6

My Win 7 Pro x64 system just started acting up. When I select an event in the Event Viewer, the More Information: Event Log Online Help link doesn't open IE10. When I click on the link, the Event Viewer pop-up confirmation box open to confirm sending information across the internet, but when I click "Yes" the box goes away and I get a momentary indication from the cursor that the action is processing then nothing. It will not change the active IE10 page or open IE10.

Is there a solution with out a system restore?

Thanks in advance for your assistance.

Regards

A:Event Viewer Event Log Online Help Links don't function

I don't know much about this kind of stuff - but here is what I dug up using Microsoft's Process Monitor and Process Explorer.

The mmc app (event viewer) sends info to one of the svchost instances (netsvcs).

Svchost writes some info to the registry about a scheduled task and then runs that task.

This starts taskeng - which starts wscript.

Wscript runs a temporary VBS file that is supposed to send a URL to the operating system (shell).

The OS is supposed to open your default browser.

Here is the contents of the VBS file from my testing:

Code:
Set shell = createobject("wscript.shell")
Shell.run """C:\Users\username\AppData\Local\Temp\tmp78C0.url"""


You might try SFC /SCANNOW Command - System File Checker

And let's hope that some other forum member can suggest things that you should check.

Read other 4 answers
RELEVANCY SCORE 73.6

A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Bus/Interconnect Error
Processor APIC ID: 2

The details view of this entry contains further information.

I run a Cyberpowerpc with an AMD FX(tm)-4130 Quad-Core Processor 3.80 GHz
I have WINDOWS 8.1 NOT 7, NOT 10, NOT VISTA, 8 EIGHT

Read other answers
RELEVANCY SCORE 73.6

Hi all,

I'm having an issue with an Events 1001 and/or 902 crash when I run GTA V it occurs at random times, and without warning. I've reset Windows 10 Pro, uninstalled and reinstalled the game but I keep getting the crashes. Windows 10 Pro should be up to date, I have my doubts about my mouse as the manufacturer hasn't released updated drivers in some time, and the rest of my peripherals/utilities should be up to date. Thanks in advance

A:Event 1001 and Event 902 at Random times while running GTA V

Hi,

Try updating your network driver (iqvw64e.sys) here: -

https://downloadcenter.intel.com/

Read other 0 answers