Over 1 million tech questions and answers.

Sandisk Ultra II 480Gb SSD not detected on E50-80

Q: Sandisk Ultra II 480Gb SSD not detected on E50-80

E50-80 new, latest 3.0 bios, Sandisk Ultra-II 480Gb latest firmware installed, not detected. Samsung 250Gb SSD is correctly detected.. Sandisk drive is correctly detected and works fine in my desktop PC, Sandisk SSD Dashboard stats its perfectly fine. Any ideas? Thank you.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Sandisk Ultra II 480Gb SSD not detected on E50-80

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 113.2

After installing a brand new Sandisk 480GB SSD, it was not recognised by the bios, so tried a 480GB Cructial SDD which also was not recognised, so put the orignal 1TB hard drive which works fine, the SSD worked fine previously in a DV7, what is the possible issue, as the N027SA is a later model?

Read other answers
RELEVANCY SCORE 65.6

Dell machine with Windows 7 installed and my sandisk drives (the 16G ones) will not work with their password protection in place. I have had to remove their password protection on another machine that runs XP. I would like to have them with their password protection intact to use on the new machine. Any ideas? I'm sure it's an easy fix that I am simply unaware of.

Sincerely, ecampvet
p.s. with my 8G sandisc cruzer the
password pro still works.
 

Read other answers
RELEVANCY SCORE 64

Hi I've edited this post to make users aware the Sandisk Ultra II SSD has issues with the 450 G3 in legacy mode.  It's simply not visible in the boot options under legacy only UEFI.  I have spent hours and hours and it doesn't work on a 240 and 480 gb models I have running the latest firmware.  I've posted messages on the Sandisk forums reporting the very likely bug. I think I'll stick to Samsung which 850 Evo works perfectly! 

Read other answers
RELEVANCY SCORE 64

Hi I've edited this post to make users aware the Sandisk Ultra II SSD has issues with the 450 G3 in legacy mode.  It's simply not visible in the boot options under legacy only UEFI.  I have spent hours and hours and it doesn't work on a 240 and 480 gb models I have running the latest firmware.  I've posted messages on the Sandisk forums reporting the very likely bug. I think I'll stick to Samsung which 850 Evo works perfectly! 

Read other answers
RELEVANCY SCORE 63.6

Good morning, i have buy a Sandisk Ultra II 1 Tb, 1/2 years ago, installed into my Lenovo Ideapad Z510 removing the old glorious SSHD.SSD work good during 1/2 yearswith Windows 10. Last week after an upgrade of Avira (3-4 day after Meltdows microsoft patch) i found my notebook crashed with BSOD screen that says inacessible boot device. Pushing a button start restoring page of Windows. Work prompt, restart. Do not work windows safe mode, restore recovery point, automatic restore starting. Not i try to save my data before try restore windows 10 or format all and install OS.Restartin PC after see that Windows Safe mode do not work i try to see what happen into Bios. Here i found boot set on legacy boot (normally was on UEFI). After have changed boot to UEFI i see that there are now SSD Sandisk Ultra II showed by bios.I try anyway to start notebook with UEFI and the PC cant start... it show a blue/white windows (like old windows 95 setup) with error "default boot device missing or boot failed. Insert recovery mdia and hit any key then select boot manager to chose a new boot device or to boot recovery media".Fortunately my Lenovo notebook have a reset button and with it i can restart bios and change boot to Legacy boot parameter. Outside my notebook the SSD work, like external hard drive with another notebook.I ask what happen on Microsoft forum.They says that Sandisk Ultra II is incompatible with Lenovo controller (think SATA controller). But last 1,5 years SSD work fine. Then i ... Read more

Read other answers
RELEVANCY SCORE 63.6

Good morning, i have buy a Sandisk Ultra II 1 Tb, 1/2 years ago, installed into my Lenovo Ideapad Z510 removing the old glorious SSHD.SSD work good during 1/2 yearswith Windows 10. Last week after an upgrade of Avira (3-4 day after Meltdows microsoft patch) i found my notebook crashed with BSOD screen that says inacessible boot device. Pushing a button start restoring page of Windows. Work prompt, restart. Do not work windows safe mode, restore recovery point, automatic restore starting. Not i try to save my data before try restore windows 10 or format all and install OS.Restartin PC after see that Windows Safe mode do not work i try to see what happen into Bios. Here i found boot set on legacy boot (normally was on UEFI). After have changed boot to UEFI i see that there are now SSD Sandisk Ultra II showed by bios.I try anyway to start notebook with UEFI and the PC cant start... it show a blue/white windows (like old windows 95 setup) with error "default boot device missing or boot failed. Insert recovery mdia and hit any key then select boot manager to chose a new boot device or to boot recovery media".Fortunately my Lenovo notebook have a reset button and with it i can restart bios and change boot to Legacy boot parameter. Outside my notebook the SSD work, like external hard drive with another notebook.I ask what happen on Microsoft forum.They says that Sandisk Ultra II is incompatible with Lenovo controller (think SATA controller). But last 1,5 years SSD work fine. Then i ... Read more

A:Lenovo Ideapad Z510 controller incompatible with Sandisk Ultra II ?

i find a solution:1) use a restoration point if before maked2) install a new WIN10 system after backup and change OS, becouse WIN10 is very bad...^,^'''

Read other 1 answers
RELEVANCY SCORE 63.6

I am unable to read my Sandisk Ultra SDHC 8GB camera card with my Sony Vaio VGN-AR21S laptop with XP Professional XP3 Media Centre Edition.

I thought the laptop should have a card reader slot but I cannot find one and when I tried the card with a USB adaptor it was not recognised.

Can anyone help please?

Thanks
 

A:Unable to read my Sandisk Ultra SDHC 8GB camera card

Found the following on the Sandisk website.

Other options you can use to read files on your SDHC card
If your computer's card reader is not SDHC compatible, you have 3 options available:

1. You can connect your camera (or other device) that works with SDHC to your computer using a USB cable that came with the camera. You should be able to transfer files to the computer this way.

2. You can contact your computer manufacturer to see if they have a free firmware update for your model that will make it SDHC compatible

3. You can buy inexpensive SanDisk SDHC card readers that will connect to your computer's USB port. Click to expand...

http://kb.sandisk.com/app/answers/d...sion/L3RpbWUvMTQzNTQwNTQwOC9zaWQvMjU1cGRYcG0=
 

Read other 8 answers
RELEVANCY SCORE 62

This card will be for my first digital camera, Canon A520 and I wonder if it is worth it to get the Ultra II one.
Also, is there any compatibility issues with this card and the camera?
 

A:SanDisk 512MB Secure Digital Ultra II or regular card for Canon A520

Nope it isn't worth it--and no, there are no compatibility problems.
 

Read other 1 answers
RELEVANCY SCORE 54

Hi all =). I'm getting a computer made with a 450w power supply. I'm getting a Geforce 6800 Ultra at least, but the company recommends a 480w supply for this card. I've heard of people having problems with their power supply not being able to cope with this card, but I don't know exactly at what power their power supplies ran. Will I run into any problems with the power supply I'm getting, or should I upgrade to 480w or more?

Don't know if you need this information also, but I think this may also effect my power supply:

Asus K8V SE Deluxe Motherboard
Athlon 64 3400+
1.5 GB pc3200 DDR Ram
120 GB HDD

Also heard that AMD uses less power than Intel or something...sooo I was thinking that perhaps my graphics card will not be affected as much because of this...but dunno. Help would be greatly appreciated =D.
 

A:Regarding Geforce 6800 Ultra, Ultra Extreme, or Asus v9999 Ultra Deluxe

One, Use a title once.

Two, nope nVIDIA GeForce 6800 families or newer REQUIRES 480w of psu minimum, PERIOD. it is not matter how much watts amd or intel uses, what you means that you must have 480w or higher to have GF 6800 working properly.

Recommendation, get ATI Radeon 9600XT or 9800XT, they merely used up less than 350w.

Lucan

You will get better games or things out of ATI instead of nVIDIA due to power usages
 

Read other 3 answers
RELEVANCY SCORE 52.4

Hi there,I've got a new T470 and Ultra Dock and try to connect my 2 external monitors via DisplayPort but nothing happens.I tried to update the firmware of the Ultra Dock but it won't work because I got the following error message in den update.log: "Error description: Can't connect to Synaptics VMMxxxx DP hub IC"The 2 monitors were still connected to the Ultra Dock. So I connected one of those monitors vie HDMI and installed the Firmware again. Now I got the current version 2.33.000 installed. But as soon as I remove the HDMI cable nothing happens again. What else can I do? Do I have an issue with my Ultra Dock?

Read other answers
RELEVANCY SCORE 51.2

Hello there.
I have a Sandisk Cruzer usb and I accidentally erased the file that came on the usb itself and now the device is unreadable to some of my other devices (DVD Player, media players, ect.). I tried looking at the sandisk website for help, I tried google for about an hour and still can't find any thing thats even relevant to this matter. So if anyone knows how to fix this please help, I really need the usb to work again.

Thanks.
 

A:Solved: Sandisk Cruzer 8GB missing sandisk files.

Read other 10 answers
RELEVANCY SCORE 50

Hey guys, i own a lenovo Y50 laptop and today i switched its SSHD to a much faster Crosair NEUTRON XL SSD.
The SSD is 480GB SSD, but when using Disk Menage and combining all the partitions and hidden partitions such as the system boot partition and system recovery partition, i only get 430GB instead of 480...
Where did 50GB went?

Also when using "MiniTool Partition Wizard" i tried to merge a D: partition to my C: drive,
the program restarted the PC and ran a DOS thing, but as soon as it load i get blue screen of death...
 

A:430GB instead on 480GB on an SSD?

Didn't go nowhere. You are comparing two different ways of determining drive capacity, one is the manufacturer's 480GB and the other is the formatted capacity which likely works out to 430GB. This has been the case since the beginning of storage devices and made marketing easier and wasn't much of an issue when drives were small. Neither is really wrong.

Anyways, read this: http://www.howtogeek.com/123268/windows-hard-drive-wrong-capacity/
 

Read other 1 answers
RELEVANCY SCORE 50

Hye! How can I add a 480gb ssd to my lenovo b50 - 80. Right now, im working with only 1 tb hdd
 
Mod's Edit: Additional information added to Subject line for clarity of issue and moved post to its own thread.
 

Read other answers
RELEVANCY SCORE 48.8

Hey,

Any help would be appreciated in this matter. I installed a new intel 730 480gb SSD and after a clean install of windows I've been repeatedly getting BSODs. The usual codes are ndis.sys, win32k.sys, ntskrnl.sys. At first I thought it was a sound card issue (I use asus xonar dx) and I actually reverted from the latest drivers to unified drivers from 2011 and that seemed to fix the crashing for about 6 hrs, but the errors came back nonetheless.

Some interesting notes are that my friend who bought the Intel 730 SSD at the same time as me, let me borrow his to to run on my computer. I installed windows on his ssd w/ my system and the same errors occurred. So it makes me really believe its not a SSD issue as much as it is a hardware/installation drivers issue.

I did notice when I'm watching streamers on twitch.tv is when the crashes begin to occur. I tried updating my nvidia drivers / realtek networking drivers and whatever else. I've done the memtest86 with zero errors and I've also ran verifier.exe and the cpu test which all came back negative for errors. At this point I am really out of ideas and any help would be truly appreciated.

A:Installed New Intel 730 480GB SSD. BSOD

I've had two crashes since this. One was after flash player kept crashing on google chrome. Any help would be greatly appreciated!

Read other 9 answers
RELEVANCY SCORE 48

I know this has been discussed to death on this and other forums but bear with me.

Goal: To migrate boot and reserved partition of W7 pro install from WD 1tb ntsf format drive to 128 or 256 gb ssd without reinstalling OS.

My Problem: So far I defragged the boot drive and ended up with a 100mb reserved partition and the remainder of the drive a single boot partition with 60gb of data. I then attempted to shrink the boot partition down to less than 100gb but could only shrink it to 470gb because at that point defrag says that there is "reserved MFT" space. Sure enough sitting about half way through the partition is a non movable block. I did shrink the partition and now my boot partition is down to 470gb still only containing 60gb of data.

I proposed to W7 disk management that I shrink that partition and it now lets me shrink it by another 50% (down to 230gb) again. Perhaps 3 more shrinks will get me where I need to be (a 100gb boot partition with 60gb of data) but there must be a safer and simpler way.

Question: If I use one the freeware tools available such as Samsung migration tool or built in W7 tools will it recognize all the empty space on the boot partition and allow the migration or do I need to purchase a commercial product? My last choice is a clean install of W7 because of the hassles of authenticating my "upgrade" installation and re-installing programs. If clean install needed I will just stay with existing HDD.

Thanks in advance ... Read more

A:Cannot shrink boot partition below 480gb due to reserved space

You could try using the free version of the Minitool Partition Wizard Boot CD. It will allow you to change partition sizes.

Read other 4 answers
RELEVANCY SCORE 46

Hi guys, back after a few months away from this great site/forum.

I have a question regarding the CHAINTECH VNF4/Ultra Socket 939 NVIDIA nForce4 Ultra ATX AMD Motherboard I was searching all over the web but can't seem to find out if this motherboard will support the new AMD 64 X2(dual core) 939 CPU? It says it supports the AMD 64 & 64 FX CPUs, but what about AMD 64 X2(dual core) 939 CPU?

If anyone here can help me out, I'd be grateful. Thanks.
 

A:CHAINTECH VNF4/Ultra Socket 939 NVIDIA nForce4 Ultra ATX AMD Motherboard

Most nForce4 based motherboards support such CPUs but not all of them do so out-of-the-box. Make sure to have a motherboard from the latest production batch. If not, it might be handy to have a single-core to flash the BIOS in case it doesn't want to power up with the dual-core one.
 

Read other 16 answers
RELEVANCY SCORE 44.4

hi people. it's been a while since i first asked a question.
I come here again to ask this question

should I try to buy a gefroce fx 5600 ultra(256 mb), or geforce fx 5700 ultra(128 mb)?
I've heard smth about fx 5700 being unstable, or just simply it sux.

so just to make sure, which one shd I buy?
 

A:geforce fx 5600 ultra? or 5700 ultra?

the 5600 ultra should be the best value. i would go with it
 

Read other 3 answers
RELEVANCY SCORE 44.4

I have a SCSI PCI controller that is ultra 2 and I have found a 36.4GB SCSI hd from HP that is ultra 3. Will the adapter slow the transfer rate of the ultra 3. If so to what degree the controller I have has a sdram slot on it with a 16 MB stick in it . Will it still work If I put a 128MB stick in it?
 

A:Solved: SCSI Ultra II to Ultra III Adapter

Read other 10 answers
RELEVANCY SCORE 39.6

Gigabyte nf4 Ultra or DFI nf4 Ultra of MSI NEO4 PLatinum?

I will be running a system:

AMD 64 3200+ or 3500+
2 x 1Gb Corsair Value ram
2 x 250Gb Seagate NCQ
LEadtek 6600GT Extreme
Tagan 480W

Now my question is, which board is faster, more stable, has better equipment ... ?

I will NOT overlock my system, so in the first place I need a motherboard that is stable and doesn't couse too much problems ...

Which of these two do you reccomend?

TNX!
 

A:Gigabyte nf4 Ultra or DFI nf4 Ultra

I'm pretty much building the same PC you are. I still need to decide on the videocard, either the 6600Gt or x700pro.

For the motherboard, I've decided to go with DFI. I haven't seen reviews comparing both, but they seem pretty much to deliver the same performances. I like the design of the DFI better, but the main thing that made me choose the DFI was the number of PCI-e slots. The gigabyte model has only 2 PCI-e 1x slots and 1 16x slot, DFI offers 1 1x slot, 1 4x slot and 2 16x slots. So I should be able to use PCI-e parts more easily in the next few years.

Feature wise, gigabyte offers 8 SATA ports(4 on 3.0Gb/s) while DFI has 4 on 3.0Gb/s only. Both seem to offer 10 USB ports and 2 lan connector.

There's not much difference specs wise, it pretty much comes down to who you trust more and price wise.
 

Read other 4 answers
RELEVANCY SCORE 36

Few days ago I got the nice, cool and very compact SanDisk CF 128+WiFi adapter. There are few things to say about it but that it is a excellent wi-fi device but the worst is that the utility that comes on the CD-ROM does not work ok HP 2210. Well you can still use it with only the driver installation. I have made a sample tutorial with a lot of screen captures that may help you. To see it go to:

http://www.wifizard.com/tutorialsXP/cf-128-wifi/index.htm

Hope it will help you.

You can see more of my tutorials at: http://www.wifizard.com/tutorialsXP/

Cheers,
Ivan
 

Read other answers
RELEVANCY SCORE 36

i jsut bought a sandisk sddr-12 , but didnt know it wasnt xp compatible so now i go to there website for drivers and the highest its got is for windows 2000, but it said it might work with xp but is not certified....the driver is in exe form and istalls the software but cannot get the driver to load....any suggestions??
 

A:sandisk and xp...is it possible???

Read other 14 answers
RELEVANCY SCORE 36

I have a Venus cellphone and want to put some songs on it with my Sandisk, but have no clue how to! I know this prob. sounds stupid, but i need some help! thx!
 

A:Sandisk ?

Sandisk is the brand name for a type of flash memory. Are you asking how to put music on a some type of flash memory disk in a way that will work with your cell phone? The best place to go for this information is your cell provider. They'll at least be able to point you to a manual that describes what memory and music formats are compatible with your phone.
 

Read other 1 answers
RELEVANCY SCORE 36

I plan placing an order for SanDisk Extreme PRO SSD 240 GB, after doing some research for both by desktop and laptop.

Your expert thoughts about them?

Would they be compatible with the desktop and laptop.......since they are SATA II and not III......both at the moment running WD Black and Blue?

Performed a clean install of W7 on both, would it possible to migrate when they arrive or shall have to reinstall again?

Thanks.

A:Sandisk SSD?

They will be compatible but will only run at SATA II speeds which is governed by your controller. It is possible to migrate your Windows installation (cloning, imaging) but if they're clean installs anyway you'd probably just be better off performing clean installs on the SSDs, it doesn't take long at all.

I can't comment on the drives themselves as I only use Intel and Samsung SSDs.

Read other 9 answers
RELEVANCY SCORE 35.6

Hi,

Recently I bought a few Sandisk Extreme 64GB flashdrives. I checked the drives with h2testw. It was a bit slower than the other drives. So I clicked „Properties“, it displayed FAT 32.
Formatting displayed exfat, 128kb and NTFS, but not FAT 32. I started „Formatting“. After this the drive was even much slower.
Done that on Win8.1. Why is not FAT 32 displayed? Is formatting the problem and the drive broken?
Thanks a lot for your suggestions!
 

A:Sandisk Flashdrive not ok..?

Read other 7 answers
RELEVANCY SCORE 35.6

I have a SanDisk Firebird, and I'm running Windows XP SP1. When I plug in my USB drive, it immediately says that I need to format the drive. The little window that pops up says it's RAW, and and if I click Format, I get error message "Windows was unable to complete format". I have tried opening Disk Manager and the drive does appear as "Healthy" with RAW format but I can't format it, there's nothing about editing or deleting partitions, and the picture in the lower part shows the partition as striped while my working USB drive is shown with a solid white color. There is no "protect switch" and I don't get a message about write protection. I also can't find anything anywhere about the drive being read-only or otherwise. The driver is reportedly up to date. Should I just give up on it??
 

A:SanDisk USB dead?

Try formatting it with this :- http://files.extremeoverclocking.com/file.php?f=197

Download the file, run it to install then run the program to format the Usb stick.
 

Read other 1 answers
RELEVANCY SCORE 35.6

I have a 8 in 1 digital media manager on my comp, i also have a Kodak DC3200 digital camera and 2 digital cards to gow ith it. I have a old SanDisk CompactFlash 8mb card and it was full. so i copied all pics to my comp and reformatted using windows XP. i went to put it back into my camera and it said it needed to be formatted. i said ok and hit continue, it formatted then cmae back and said same thing agaign and again and kept formatting, i check kodak and Sandisk websites and they didnt have much to say about it, HelP?
 

A:SanDisk CompactFlash

how have you formatted it in XP
NTFS
The camera will want a format in FAT
 

Read other 2 answers
RELEVANCY SCORE 35.6

Hi
I've recently purchased a 2 gb micro Cruzer sandisk (U3) and it has stopped working -
i have loads of files on it..
the light does not come on
the CPU does not find it
Help!

any suggestions?
 

A:Faulty sandisk

Well on the other end (ie not worrying about the files)
HP USB Disk Storage Format Utility
Http://downloads.pcworld.com/pub/new/utilities/peripherals/SP27608.exe

Will format any USB flash drive
It can be known to recover Flash drives that are un-responsive too.

But to recover your files, first try another computer USB port
 

Read other 1 answers
RELEVANCY SCORE 35.6

Ok this is the deal:
512MB Sandisk Thumbdrive

Windows XP Pro
KT3 Ultra2 MSI MoBo
512 MB RAM

Works in other computers, but it wont work in mine.
USB drives work with like mice and other stuff just not the thumbdrive.
It used to work but now it does not. When I try to connect the drive this is what it does:

Takes about 3040-45secs to reconize it and it says " Found new hardware and installed it and it works" But I dont see it listed under my drives in windows exployer.

I unplugged all usb drives and went to device manager and uninstalled all USB devices, and all storage devices ( 3 generic volumes).

I've reinstalled windows and still this problem persist.
I've went to sandisk web site and they are no help there.

Am I overlooking the solution? Could I have a conflict? I've noticed my 56k modem ( which I no longer use but like to keep it in my computer ) has a ! next to it but i just disabled it.
 

A:SanDisk Problems

Read other 7 answers
RELEVANCY SCORE 35.6

I have a Sandisk Cruzer Titanium 4GB U3 usb-key, but after I insert it on my Win 7 machine, I see the following message:
However, I can still access all my files on it (at most of the times that I insert it, sometimes I can't). On XP machines it works fine. I have also tried formatting, as it keeps asking, but it asks again and again even after I had foramtted it. What the..?

A:Problem with Sandisk USB

If you remove and reinsert the drive, does it sometimes go away?

I had a thumb drive once that did that. It was a sign that the drive was going. Sometimes it worked, sometimes it didn't.

Read other 7 answers
RELEVANCY SCORE 35.6

My testing of Windows 10 shows that the Sandisk Cruzer has no driver
in Windows 10 for it.
I have no idea how to send feedback to Microsoft so this can be added.

A:sandisk cruzer 32G

Hello jack, use the link in this post to see how

http://www.tenforums.com/general-dis...tml#post155401

Read other 46 answers
RELEVANCY SCORE 35.6

hai when i plug my usb device it is appearing and disppearing.


after some time it appears when i try to copy any files the following error occurs

the system cannot find the file specified

and the properties are
filesystem:- unknown
used space:-0
free space:-0
 

A:USB Sandisk Cruzerblade

can you reformat it?
 

Read other 2 answers
RELEVANCY SCORE 35.6

i got this thing a couple weeks ago, and whenever i close my laptop (it says in Power Options closing the lid goes to sleep), it gets disconnected and says caching disabled. this happens every 2-3 times i close my laptop. help?

A:SanDisk HyperBoost

Have you tried to disable Sleep and Hibernate Mode?
Go to Control Panel>Hardware and Sound>Power Options then click on the blue link "Change plan settings" and under "Put the computer to sleep" change it to Never on battery and Plugged in, then save changes. Once it takes you back to Power Options, on the left menu, click on "Choose what closing the lid does" and change them all to "Do nothing" and that should fix the issue. It did for me.

Read other 1 answers
RELEVANCY SCORE 35.6

I am in the market for my first SSD and was going to buy the Samsung, but they keep raising the price everyday ( up 50% in a week).

I saw this Sandisk at the Staples Website and I have a rebate card that I can use , which would bring the price down to $50.00.

The question is : Does anyone have experience with the Sandisk model in comparison to Samsung?

Thanks,

Paul

Amazon.com: SAMSUNG 830 Series 2.5-Inch 128GB SATA III MLC Internal Solid State Drive (SSD) MZ-7PC128B/WW: Computers & Accessories

SanDisk SDSSDP-128G-G25 128GB 2.5" SATA III (6 Gb/s) MLC Internal Solid State Drive (SSD) | Staples?

A:Samsung SSD vs. Sandisk

I'd apply the credit at Staples to a Crucial M4, 128 GB, priced at 110.

Crucial CT128M4SSD2 M4 128GB 2.5" SATA III (6 Gb/s) MLC Internal SSD (Solid State Drive) | Staples?

Samsung, Crucial, and Intel probably have the best reputations.

SSDs are constantly going on sale, so you will probably benefit if you can shop for 2 or 3 weeks.

Read other 9 answers
RELEVANCY SCORE 35.6

I have WINME
IMAGEMATE SDOR-75
256MB Sandisk

Until today I was able to view the pictures on my SanDisk with my Imagemate. Now it tells me to insert a disk in the drive which I have already inserted.. There is no further action available to view the pictures. I can't install a driver since a driver is not required for WINME.

Thanks
 

A:Problem with Sandisk

Burt,

Let me ask a silly question (based on my own experience) are you sure that the card is not flipped over....upside down?

Another Question...does the card still work in the camera?
 

Read other 3 answers
RELEVANCY SCORE 35.6

I'm having trouble opening my 1.0gb micro sd card in on my computer. usually a window would pop up but now it wont. I tried opening it on My Computer but it just freezes and doesn't respong. My phone won't recognize the card also. What can i do?
 

Read other answers
RELEVANCY SCORE 35.6

My Sandisk 8fb cruser wks well on my PC. However, it seems to wk on my Mac ONLY if I remove the password protection. Is this true? If so, how can I get around this? I want to keep my flask disk pw protected AND use in on my MacBook
les b.
 

A:Sandisk Mac and PC issues

If you're using the U3 software to password your drive then you can't use it with your Mac. U3 is only supported under Windows operating systems.
 

Read other 1 answers
RELEVANCY SCORE 35.6

I use this Memory card on my Sony Ericsson k850i and now it doesn't work anymore. I know there's nothing wrong with the phone caus I'm using a 512mb one thats the same brand. I try formatting it on the computer but it just says that 'Windows was unable to complete the format'. The phone doesn't read it anymore so I can't format it through there. When it's in the computer it says I have 1.12 gb worth of files in there but when I go into it there's nothing.

Any ideas how I can save it? Or is it dead? lol
 

A:Sandisk M2 2.0GB not working, help?

Flash drives, like hard disks, have two major components, a storage component and a controller component. A hard disk has platters and the hardware that run it and the stylus that reads it. Then there is the logic board, the circuit board on the bottom of the hard disk that controls the reading and writing of the disk

A flash drive has a memory chip and a controller chip. Most likely, the controller chip in your flash drive has gone south. If that is the case, your flash drive is now as permanently unreadable as a hard disk with a failing logic board.

The data may be recoverable but at great cost, usually $500 and up.
 

Read other 2 answers
RELEVANCY SCORE 35.6

I have a casio lk-210 lighted keyboard that will not format a 1 gb sandisk sd card. All you are suppose to do is insert it and push the format command button and it should work. It responds ERR file, which is wrong because I have have 10 songs in the file. Both the keyboard and sd card arrived only 1 day ago, so everything is new, at least to me.
Thanks,
Moe
 

A:Sandisk SD Card

Did you ever see one work that way with a keyboard? I don't think so.
Have you tried just using normal OS commands to do this. Have you tried reading the online directions that come with the San Disk.
 

Read other 2 answers
RELEVANCY SCORE 35.6

hey guys,

im going to be buying some memory for my digital camera tomorrow, i have a toshiba PDR-M500 camera, and it takes Secure Digital (SD) memory...
im going to be buying a 512 meg sd card...

my question is, which brand is better in my camera, and have you heard anything good or bad about either brand?

they are roughly the same price, and i think the lexar might be 8x speed, im not sure about that as the website wasnt clear...

any thoughts about these two brands, or how they will work in my camera, or any opinions are welcome...

thanks in advance
 

Read other answers
RELEVANCY SCORE 35.6

I have a buddy who handed me what a flashdrive, a Sandisk Cruzer Titanium 2 GB with U3, that he said no longer worked for him. Well several hours later, I can't make it work either. When the flash drive is plugged into multiple computers (XP x 4, Vista x 1 even though Vista is NOT supported), the light on the drive flashes and the computer attempts to find the "cruzer mini" driver, which will eventually fail (the light on the drive will remain on indefinately, however). I look in Windows Explorer and Disk Management and the drive is not recognized. I look in the device manager and there is an exclamation point next to exactly one "USB Mass Storage Device." I said screw this and brought out my big gun Recover It All software for data recovery and *IT* doesn't see the device. Interestingly, when the device is plugged in the Safely Remove Software button becomes available, but when I click on it, there is nothing to select (which tells me, "yes I see something but I don't recognize it"). I've attempted to install Sandisk's WONDERFUL drivers but they won't install UNLESS IT CAN SEE THE DAMNED DRIVE, which it can't. Bottom line: u3 drives suck. I know I'm preaching to the choir, but I wanted that to be excrutiatingly clear!

So here's my quesiton: I'm looking for suggestions on how I can force the recognition of a USB device that is not natively recognized by the Device Manager or Disk Management. Any ... Read more

A:Cannot see Sandisk Cruzer 2GB with U3

Bump. I'm finding it hard to believe that PnP cannot be worked around in XP re: hardware recognition. Anyone have any ideas? Or is this hardware DOA?

Fuzzylogik
 

Read other 2 answers
RELEVANCY SCORE 35.6

I looked at a couple of older post on this subject, but none of them seems to fit my problem. I recently bought 2 each SanDisk brand SD 512 mb cards. Loaded up some photos from my computer. However, when I get about 217 mb on the card, it will not accept any more. I get a window that says "Cannot Copy(file # it stopped on): The directory or file cannot be created". I check the volume on the card and it has about two-thirds volume free at this time. I have formatted the card, but this does not help. I've tried several ways of loading; "Sent To", copy & paste, drag & drop, etc. Same results each time. Same problem with both cards. I have loaded the same photo's on a stick with no problems. The SD cards file system is FAT. Contacted SanDisk, but they don't seem to want to talk to me. My system is a Dell Laptop with XP, 2 gigs memory.

Any Ideas?

Thanks
 

A:SanDisk SD Card

Got it! Reformatted to FAT32. Sorry for the bother. Should have done this before. Thought I'd leave this comment for others if they have the same problem.
 

Read other 3 answers
RELEVANCY SCORE 35.6

Can Anyone Help Me ?
1. How Can I Delete Videos That Were Converted From Computer?
2. How Can I Stop Song From Playing To Listen To Another?
Thank You
 

A:Sandisk Mp3 Problem

Welcome

great question for the multimedia section...

Click the red triangle at the right of your post and ask for it to be moved there... Please ... do not start a new thread

buck
 

Read other 1 answers
RELEVANCY SCORE 35.6

Hi there, I have a flash drive which I intentionally removed the U3 software from and was just wondering if there was any site or method to restore it.
Any help would be appreciated... Operating system(s), Wondows XP PRO SP3, Windows XP SP1
 

A:4Gb 'U3' Sandisk Cruzer

You should be able to find tools to install and remove U3 Launchpad on the Sandisk support website.
 

Read other 2 answers
RELEVANCY SCORE 35.6

Hi guys im having problems i grabed a 2.0GB extreme 3 comoactflash card from an on line shop, i have taken photoes but cant seem to up load them on to my computer, i have tried the dater cable and even sliding it in to the computers card holder slots it keeps wanting me to put in a sireal number i have checked the packaging nothing apart from a pease of paper saying phase 1 and a serial number but it isnt exepeted all my othere cards are exepted my computer is well up to date it cost 1500 last year so i would have thought it would work ok can any one help please. ta mark
 

A:sandisk compactflash

Have you formatted the card in the camera?
 

Read other 1 answers
RELEVANCY SCORE 35.6

i just got a sandisc cruzer titanium, and have already screwed up. i have windows ME, which i thought was supposed to have the driver already loaded. so when i plugged in the cruzer, it said it recognized new hardware, and then a new dialogue box flashed up saying that i needed to reinsert my millenium cd. while my husband went to look for that, i unfortunately clicked OK on the dialogue box, then "cancel", and now i will not even recognize the new hardware. I don't know what to do next. anyone familiar with this scenario?
 

A:i need help with my Sandisk cruzer

Go into Control Panel/System/Device Manager, and UNinstall anything to do with that Cruzer.
Reboot and insert it again, but this time don't interrupt!
 

Read other 1 answers