Over 1 million tech questions and answers.


Q: Replacement

Hi,I am searching for a replacement of the network connector, only the plastic part which holds the cable steady. It's broken and I've looked almost everywhere but I can't seem to find one.See the picture for extra information.Greets,Rick Edit: I have a Yoga 500-14IBD

2017-10-12 10.16.42.jpg ?3519 KB

Read other answers
Preferred Solution: Replacement

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


(Just posting this here so people in the future can find it.) I replaced my motherboard and just wanted to leave this here for future reference to some poor soul who has to do the same.
If you replace the motherboard on your Dell Studio XPS 8000, (service tag 3L8DHK1) and you need a new motherboard you can use an INTEL DQ57TM, it's compatible and I did a successful transplant. Your processor is an INTEL Core-i5 750 CPU 2.67GHZ it uses a SOCKET LGA1156. It uses DDR3 memory.
Once you take out your old motherboard and disconnect all those usb and audio wires and the power button wires. To hook up your USB front jacks, audio jacks etc.... here's which blocks go where:
Wires from the audio jacks and usb ports go into these colored block connectors, and those connectors get plugged into those little rows of pins/jumpers called Internal Headers. Every motherboard manual tells you about them. Grab the manual for your new motherboard and it'll tell you where your audio1, usb1, usb2, usb3, usb4 Header connectors are they look like 2 rows and 5 collumns of short little pins. (They almost always have 1 or 2 pins missing on purpose.)
the wires leading to a YELLOW BLOCK gets plugged into the audio1 header on your new motherboard, it's for audio jacks on top of the computer
wires with the WHITE BLOCK gets plugged into the usb3 headers on your motherboard (they are for the usb jacks on the very top of the computer tower)
wires with the GREEN BLOCK gets plugged into ... Read more

Read other answers

Can I replace a Intel 4 SL7E2 2.80 GHZ/533MHZ with a SL7E3 2.80GHZ/800MHZ? The power supply ,ram and Hard drive have all been upgraded.
The current cpu is showing 100 % usage at times and has been slow.I have sl7e3 from another unit .The PC is a Dell Dimensions 4600.

A:CPU replacement

Read other 16 answers

WOuld a replacement hard drive come with a loaded OS?

A:Replacement HD

Hi, No, I don't think a normal shop would do this. Regards.

Read other 3 answers

Okay well while I've made a topic about this before sort of I really am freaking out here I have it narrowed down Ill give all the info i can. Its the Hp Dv1040us.

(original part)
Here is the part number for Hard Drive : 367787-001
Royce: Here is the part description :
Royce: ATA-100 EIDE hard drive - 4,200 RPM, 2.5in form factor, 9.5mm hei ght

So here is some info about the computer
http://h10032.www1.hp.com/ctg/Manual/c00636251.pdf go to page 92-93 it works with a variety of their hard drives. It says 5400Rpms on 92 :s so does that mean it supports it BAHHH!

okay so look this website offers a perfect match but I never heard of it.http://www.getpartsonline.com/80gbhd-pres-v2000.html

So i was thinking I should go with newegg because I know there good. here is the page for them.
what I need to know is if the newegg hard drive will work or if you fellas/ladies have bought from them I have noticed they have older parts for the same price they would have costed when they were first introduced(look at the Geforce 6800gt $350 :s, so it makes me a little iffy.

A:Replacement Hdd help

I don't think I would ever buy a "refurbished" laptop hard drive... The hard drive is simply an IDE 4200 rpm 60GB laptop hard drive. A 5400 rpm drive will work too. Newegg is a fine company. I buy from them all the time... It is your decision

Read other 4 answers

Is it difficult to replace the lid of Acer Aspire V3-771G (with the Acer Logo on Back). I saw some screws on each side.

Read other answers

Is it possible to remove a ATI Radeon X1200 graphics from a Toshiba A215-S7437 and have it replaced with a Performance Video card?


If ATI Radeon X1200 cannot be removed from a Toshiba A215-S7437, can another graphics card be added with the ATI Radeon X1200 still intact?

Performance Video cards:

Nvidia GeForce Go6600
ATI Mobility Radeon X700
Nvidia GeForce 8400M-GT
Nvidia GeForce Go7600
ATI Mobility Radeon X1600
ATI Mobility Radeon X1700
ATI Mobility Radeon X2500
Nvidia GeForce Go7700
Nvidia GeForce 8600M-GS
Nvidia GeForce Go7600GT
ATI Mobility Radeon HD 2600 DDR2
Nvidia GeForce 8600M-GT DDR2
Nvidia GeForce 9500M-GS DDR2
ATI Mobility Radeon HD 2600 GDDR3
Nvidia GeForce 8600M-GT GDDR3
Nvidia GeForce 8700M-GT
Nvidia GeForce 9650M-GS

Read other answers

If i bay this fan https://www.pci.gr/el/Laptop-Tablet/Laptops-and-Antallaktika/Antallaktika-Notebooks/CPU-Fan-gia-HP-1... will be compatible with my Laptop model

Read other answers

my screen cover broke and looking for replacement how much would it cost

Read other answers

My laptop is Model: HP G60-549DX NB PC  ALL ..My HDD i thnk not working Properly..i am going to replace it ...can u help me Is this HDD is Compatible with my laptop... WD5000LPCX - 500 GB - 2.5 inch form factor; SATA 6 GB/Sec; Thickness / Height - 7mm ; Length - 100.2 mm; Width - 69.85 mm ThanksAshish

A:HDD Replacement - HP G60

HI Ashish,Yes the model you have mentioned in your post is compatible with your system. Hope it helps,David

Read other 2 answers

A friend of mine called to say that their computer was shutting down randomly and the computer was running really loud. I stopped by and took the cover off and noticed it was the CPU fan. I just wrote down the model number of the PC and didn't measure the fan, assuming I would be able to find it online. Maybe it's there, but I'm not smart enought to see it. The computer is a Compaq Presario SR5233WM (GN578AA). Below are the specs I found on Compaq's site but I'm still not sure of the size of the fan and really hate to have to stop by again to measure the fan. Can any of you tell what size of fan it's using? Thanks.


A:CPU Fan Replacement

Read other 9 answers

need to replace h/d as it is going bad. is there anyway to save whats on it including the windows xp?? and put it on the new h/d thanks

A:H/d replacement

Yes. You say your hard drive IS going bad? So get a new drive. Install it as C or primary master with the OS on it, and connect the old drive as D or primary slave. If the old drive can be read by the new operating system you may be able to save the files to the new drive

Read other 4 answers

can I replace my HDD with SSD ?If yes please let me know if i can also use the HDD along with the new installed SSD  by using a caddy thus replacing my cd-drive with HDD caddy...

Read other answers

This system has the OEM NVIDIA GeForce GTX 745.  Having problem with video.  What graphics card can I use as a replacement.

A:GTX 745 Replacement

Hi,          You can use the AMD Radeon R9 270 2 GB which is ompatible with unit.  RegardsSATISHP4 Click " Thumb's up " icon if the question is answered/resolved.

Read other 1 answers

Hi I need a new cpu (I broke pins) and have found the cpu I have https://www.amazon.co.uk/AMD-A10-7800-Radeon-R7-Graphics/dp/B00LM5PDBS but was wondering if the cpu Amazon suggests as the newer model: https://www.amazon.co.uk/gp/aw/d/B00FO5UZC4/ref=dp_ob_neva_mobile would work as I can't find a mobo compatability list anywhere Cheers

Read other answers

Is it possible to replace the Intel pentium p6200 processor with Intel Core i7 920XM

A:CPU Replacement

No sorry. Top processor is i7-640M: Service manual No Quad Core is supported so I don't even think there is a chance the 920XM would work.  Post back with any more questions.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers

A member of my church cracked the screen on their HP19 All In One. What part number do I need for a replacement?

Read other answers

I have an HP Touchsmart 600-1055 NY539AA in need of replacement fans.  Where can I find these?  I've looked online and can find lots of fans, but none that seem to be a direct replacement.  Anyone have a good source?  Thanks in advance!

Read other answers

Can I replace my hdd(1TB) with a new ssd(256GB)? Let me know "how to transfer OS?"I know that I can't clone with each other for capacity difference.I saw how to change the hardware in Youtube.But I don't know how to install OS and HP assistant program? Have to buy a new OS? Please advise me.. In advance, thanks for your kindness. 

A:hdd replacement with ssd

I wrote a response to a question about this in the notebook>hardware and upgrade section.  It was made into a sticky.Here it is,http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/How-do-I-upgrade-my-notebook-to...  Here is how to do identify your notebookhttps://www.google.nl/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwie7q73otbSA... If you would like to know which specific SSD type will work, and there is a list of different types, you will need to identify it properly. I have a product loan Spectre notebook. It is identified as a HP Envy Spectre 13-v021nd.

Read other 1 answers

Hi There,

AS Windows SteadyState isnt combatable with Windows 7, I need to find a replacement.

Does anyone know of any good replacements they can recommend>


Toby Hutton


Deep Freeze or Time Freeze

Read other 2 answers

I have a custom machine that one of the fans has started running really loud and is changing pitch all the time. I'm pretty sure that its the cpu fan and im getting ready to replace it.

HOWEVER i have never done this before and i have no idea how to determine what fan to buy to replace it... its one of these that has the heat sync attached. any education on what paramaters i need to consider etc would be appreciated

A:Cpu fan replacement

Read other 7 answers

I've decided it would prob be best just to replace the internal disc drive in my laptop but would prefer not to buy anything else Desknote related(not that there is a whole lot of options for parts).

The pc is a Desknote A928
running XP
current using slim drive QSI DVD/CDRW SBW-081
Any suggestions on another brand that would be compatible and worth buying.

A:Replacement cd/dvd help

it is going to be hard without being able to compare the old drive next to the new drive to make sure it is going to be physically compatible. My Dell can use a few different drives yst they will not physically be the same and therefore even though they fit in the drive bay there is no way of securing them. There fore using what Dell has to offer is MY only option.

You may be better suited for a different drive though. I would make sure that you have a return policy if it doesnt work with what you buy.

Read other 3 answers


Yeah I did the unmentionable - I messed up my CPU when I was replacing the cooling fan .

Specs on the M/B:
CPU Support: Intel, Socket 478, Pentium 4 Up To 3.20 GHz
Bus Speed: 400/ 533/ 800MHZ
Expansion Slots: 1-8X AGP, 5 PCI
Max Memory: 3 DDR - 12 GB
Chipset: VIA PT800
IDE Controller: Supports ULTRA ATA 133, SATA
Additional Features: ATX Formfactor, Supports 8X AGP, Supports DDR400 Max 12GB, Supports ATA133, Supports Serial ATA, Supports 6 Channel Audio, USB 2.0 Support, On-board LAN

My memory is:
512MB PC3200 DDR 400MHz CL3
256MB PC3200 DDR 400MHz CL3

My old CPU was:
Intel P4 2.8Ghz 512k Cache,400FSB SocN 478

With my memory being only 400MHZ, can I put a higher value CPU in, such as:
Intel Pentium 4 3.4GHz / 1MB Cache / 800MHz FSB / Socket 478 / HyperThreading / Processor

(also known as 'bull in china shop')

A:CPU replacement - need help

Read other 8 answers

Hello everyone,
I see there is a lot of threads about PSUs so I'm hesitant about posting another one. I just have a quick question. My parents' PC (HP a250y) suddenly stopped working and I traced the problem to the PSU (I used another PSU to verify this).

Well, I don't have a clue what to look for in a replacement PSU, besides the max power rating. The original PSU is Bestec ATX-250-12Z. So, I need a PSU with at least a 250W max out, that is ATX form factor(?). The main connector is a 20 pin. I also need at least 4 peripheral connectors w/ 1 floppy drive connector, and an ATX12V P4 connector.

Looking at newegg, there is A LOT to choose from with many different types available (ATX, ATX12V, ATX12V/EPS12V, ATX12V/MicroATX, and MicroATX).

I just need some guidance. Looking to spend $30-$40...that seems to be the average price of the PSUs on newegg that are 250-300W.

Thank you

A:PSU Replacement

The Bestec you are replacing is nothing special. This supply will be much better:

Read other 3 answers

Ok, emachine, t2984, Failed HDD, replaced with identical HDD that had been formatted. Hitachi Deskstar 80g. I have the restore DVD. It will load up. I can see the ghost images and it loads successfully. After all loaded, reboot, then I can see it going into a blue screen but reboots itself. I think it says missing C:windows system32 blah blah..ok. Yes I tried rebuilding the BOOTCFG. Will not work. Ok. so this is where I am at, I believe that I need to tattoo the HDD and can do this blind folded with an HP, however, emachine is being stubborn. I can not find any information on this whatsoever, its like a black hole of information to find the iso tattoo program for emachine. Can anyone in here point me in the right direction to tattoo (Flash) so that the restore disk will work properly. Yes I could reinstall a new OS but its a friend and he can't afford it right now. You know how it is when your friends come to you and need a favor, next thing you know its eating every minute of your life away.


A:Help with HDD replacement

Your eMachine T2984 is a high failure rate motherboard... well in excess of 60% after two years... Your problem could easily be caused by the eMachine motherboard failure. Your hard drive that came in the eMachines is likely good, as is the cpu, cpu fan, modem, and optical drive. But the motherboard and power supply are of such high failure rate that you will need to test them thoroughly with a power supply tester... and trying your hard drive and other components in another board.

Read other 2 answers

I have an HP Compaq 6510b notebook that needs a new hard drive. The existing one isnt damaged, just nearly full. I dont know why, in all the years of computing Ive never had to do this. Possibly because previous PC's have become obsolete before the HD needed changing.
Now I'm pretty sure the Hard drive I want is a 2.5" SATA, and after watching youtube videos I'm fairly confident I can do the job, but {and this is the question I really should know the answer to after 20 years of computing} what I dont understand is, presumably when you fit a new HD it doesnt have an operating system on it, so do you need to buy a new one? I have an authentic version of Windows on it currently, but it didnt come with the disks, so presumably I cant use that?
This is probably very basic stuf,f so please forgive my ignorance.
Thanks in advance,

A:Help with HD replacement please

Read other 10 answers

Hi, first of all, I am not really a tech guy and I dont know anything about hardwares so that is why I am posting here.

I have a Toshiba A25-S207 laptop running windows xp. The hard drive crashed a while ago, and i need to buy a new one. The hard drive that was in is : 40GB* hard disk drive, Enhanced IDE (ATA-5), 4200rpm, 9.7mm height, 0.2lbs, Service Removable. Can anybody tell what can i replace it with? And also can i use the Recovery DVD that comes with the laptop to install the drivers and the OS?

Help is appreciated.

A:Possible HDD Replacement

The hard disk must be a Parallel ATA (aka PATA or IDE) of just about any one of that type that is available.

ATA 100 Drives

ATA 133 drives

Short education on the use of the term "IDE": Both the old 40-pin IDE drives and the newer Serial ATA drives are IDE devices; but, people generally mis-apply the term "IDE" as distinguishing the older 40-pin drives as IDE.

can i use the Recovery DVD that comes with the laptop to install the drivers and the OS? Click to expand...


Read other 2 answers

Hi all,
as some of us know CMD is being "withdrawn" however I use CMD a lot for processing my Radars output files.

Can anyone suggest a replacement for CMD or should I just build a windows XP/Win 7 VM for the processing?

Read other answers


First-time visitor! The wi-fi on my Toshiba Satellite M645 stopped working some time back. I contacted Toshiba and after some troubleshooting they informed me that the wi-fi card was bad, that it couldn't be replaced and that I'd have to buy a USB wi-fi in order to get wi-fi capability back (my warranty has expired). That didn't make sense to me, so I took it to Best Buy, where I bought the laptop, and they did a little troubleshooting and said the wi-fi card was bad but that it could be replaced! However, they weren't allowed to order and install such parts. They did remove a bottom cover and point-out the card. So now I need to find a replacement part. I've got all of the information from the card but I don't know enough about all the numbers to know what's important and what's not. I'm hoping someone on here can point-out what I need to ensure matches on the replacement card that I order. Here's the info:

1:Main, 2:Aux
Intel Centino Advanced-N + WiMax 6250
Model: 622ANXHMW
P/N: G86C0004T510
WFM: 00231519CB70
WMM: 64D4DA003D9B
TA: E93515-001

Thanks in advance for any assistance you may be able to offer!

A:Wi-Fi Replacement

you may find a small nano wireless USB adapter a lot cheaper

As an example - NOT a recommendation

based on this number


can you take a picture of it ?

BUT would you do this
goto device manager
and then on the network adapters - click on the wireless adapter
Click on the Details Tab
Under Property - drop down
Select hardware ids
Right click and select all.
Then right click again and select copy.
Copy and paste that here.

The Hardware ID's. VEN & DEV. Look them up here.

How to find drivers
Tech Guy configuration

drivers using the VEN and DEV IDS

Read other 3 answers

I have an HP Pavilion G6 2320tx and I want to replace the fan. Since my region doesn't have an hp servicing centre I will need to order it online. My question is what type of fan does my laptop have and does it have a unique model number that I can use to searcwith?

A:Fan Replacement

HiYou need HP part number 680551-001Page 23 in this manual: http://h10032.www1.hp.com/ctg/Manual/c03593041Like this: http://m.ebay.com/itm/NEW-For-HP-Pavilion-680551-001-CPU-cooling-fan-4-wires-/310702908736Search HP part number through online sellers in this area.RegardsVisruth

Read other 1 answers

hey i am new to this so whats up.........
recently i bought a 366 Mhz Processor for my IBM THINKPAD 770 series laptop....After i took my laptop apart i could not find the processor... i didnt want to go under the big sliver metal area becuase i didnt want to mess anying up yet.. lol what i want to know is where the hell is the processor... or can anyone show me pictures? i have a 3.0 ghz laptop... i am just messing around with this oold one... just trying to upgrade it a litle... so can anyone help?

A:CPU replacement

Read other 9 answers

I have a DELL 4100 that needs a new HD. The original one is:

Can I replace with this one?

If not, can you direct me to a one that would work. This is an old PC that is going to my young cousin, so she doesn't need anything fancy or with a lot of storage space. I just wnat to get the PC working for her to use until she needs a better one in the future.


A:HD Replacement?

If you have the space inside, that is drive space, that one should work fine. Are you removing the present drive?

Read other 3 answers

"Hi" I just recently bought a pc for a very low price. I'm fully aware of it having the worst processor ever. I'm willing to replace the mb completely. This mb has agp slot for graphics. Ofc the new mb would have to have a pci express 2. Probably a quad core. Nothing specific with ram. But I just need to know what direction should I go in reference to. What would fit!

A:Help w/ MB replacement

Read other 16 answers


My computer has been making a humming sound after it has been on a while. I took off the sides and blew out the dust, and alot came out of the fans. I noticed that one of the fans blades did not turn freely when I blew air on it. Hooked up the power cable and turned it on and the fan did not turn. Once and awhile it tried to turn but then would stop again. The fan is mounted on the motherboard and has ABIT printed on it. It is the smaller of the two fans mounted on the motherboard. How difficult is it to replace and what is it called? Is it the motherboard fan? Thanks for any advice.


A:Fan Replacement

Read other 7 answers

I don't know where this thread belongs, or even if it's relevant to tsg, but here goes: A friend has a Dell XP desktop. She lost her original installation discs, and called Dell for a replacement. They sent her a new XP Home CD, and charged her $180. The same as if she had never owned a Dell PC, and had gone out and bought an XP CD for full retail price. It doesn't sound right to me. I thought that you would pay for some kind of service charge if your installation CD got lost or damaged. Did Dell make a mistake? Is this normal business procedure?


A:replacement os cd

Read other 6 answers

I have an ENVY 15  ae109na laptop fitted with the Samsung 128 GB MZNLF HCHP  SSD drive What I would like to know would the Samsung 500 GB  850 EVO M.2 Sata 111 ssd drive be compatible? as the installed 128 gb is rapidly filling up. Any help would be greatly appreciated. Mick

A:SSD replacement

Here is the Service Manual: Manual See p. 42-45 to get an idea how to do the replacement.  You do have a 1 TB regular hard drive and with a bit of file management you could move some stuff to the 1 TB drive and keep working off the 128 gig M.2.  You can do a backup to the 1 TB drive and use that to essentially clone your installation from the 128 gig to the larger M.2 if that is what you decide to do.  Yes the Evo 850 M.2 SATA-III mSSD will be compatible or any other SATA-III M.2 that has the B + M  pins (pitchfork I call it).     If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers

Hello All

Most sites I visit inform me they either do not support or will shortly be withdrawing support for IE8. Opinions welcome as to which browser would be best for me (a simple man) to replace IE?
Regards SilverSurf

A:Best replacement for ie8

Read other 7 answers

Hey not sure where to put this at but I'm looking for any help on replacing my hard drive for my computer... I have an eMachine W4065 (yea yea i know its junk thats why i'm upgrading) and i bought a new maxtor hard drive for it... when i disassembled the old hard drive it looks totally different from the one i bought... the one i bought is all enclosed in a little black square and has the plugs. my old hard drive though has circuit boards attached to it and everything else. Will the drive i bought be able to work somehow that i haven't noticed or did i just waste my money? thanks for any help

A:Cd Rom Replacement Help!

Some older drives have an exposed circuit board on the bottom.
How old is the computer?

Read other 2 answers

i am getting hdd warning message - stating its due to fail.   The drive installed is a seagate ST3750528AS 750gb which was discontinued long time ago, can I just put in any SATA drive as replacement?  I think old one is a SATA II drive - woukd a SATA III work? ThanksScoops

Read other answers

Product Number:   LM418AV Need to replace noisey fan.  From the manual, it looks like these are my options:For use only with computer models equipped with an Intel processor and a graphicssubsystem with 2-GB of discrete memory650801-001For use only with computer models equipped with an Intel processor and a graphicssubsystem with discrete memory641493-001For use only with computer models equipped with an Intel processor and a graphicssubsystem with UMA memory641492-001 From the output below, it looks like I need 650801-001.  Retails on HPs site for $500?!?!  Can anyone confirm if that's the part number I need?? Thanks!!Dave DXDIAG out---------------Display Devices---------------Card name: Intel(R) HD Graphics 3000Manufacturer: Intel CorporationChip type: Intel(R) HD Graphics FamilyDAC type: InternalDevice Type: Full DeviceDevice Key: Enum\PCI\VEN_8086&DEV_0126&SUBSYS_165A103C&REV_09Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]Device Problem Code: No ProblemDriver Problem Code: UnknownDisplay Memory: 5078 MBDedicated Memory: 1008 MBShared Memory: 4069 MBCurrent Mode: 1600 x 900 (32 bit) (60Hz)Monitor Name: Generic PnP MonitorMonitor Model: unknownMonitor Id: LGD027ANative Mode: 1600 x 900(p) (60.080Hz)Output Type: InternalDriver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,amdxc64.dllDriver File Version: 8.17.0010.1404 (English)Driver Version: Version: ... Read more

A:Replacement CPU fan

Hi,Manual: page 30, 91http://h10032.www1.hp.com/ctg/Manual/c02842278You need -->Fan/heat sink assembly (includes replacement thermal material):�For use only with computer models equipped with an Intel processor 640903-001�Part No: 640903-001Description: THERMAL MODULE DISChttps://www.amazon.com/Looleking-Replacement-640903-001-CPU-Cooling/dp/B00VV2DE1SRegardsVisruth

Read other 1 answers

Hi all,

Recently I got a replacement HDD from Maxtor. Upon inspecting my new HDD, it say Refurbished drive. So they sending me an 2nd hand HDD.

Question is, can they do that?

No way, I'm going to buy Maxtor drive anymore...

A:Replacement HDD

Everyone does that.

If some ***** RMAs his perfectly OK drive because he can't plug the cables in right then you can't expect Maxtor to throw the thing away.

All companies fix trivial faults in their products and let them back into circulation. You should appreciate that Maxtor actually bothers to let you know.

Read other 2 answers

I am looking for a windows 10 compliant GPU for my 3+ yr old Precision T1650 which will handle 2 monitors. my applications are CAD programs NOT gaming. Cost is a factor as this is already an old system. Sugestions?

A:Replacement gpu

What is your current GPU?

Read other 1 answers

Did somebody knows how to replace HDD to SSD and set it up as a  primary boot disk?

A:Replacement of HDD to SSD

@Ed6467 Hello;Allow me to welcome you to the HP forums! There are various ways to do this, but I can tell you how I have done this -- several times. What I recommend is the following:1) Download and install Macrium Reflect (MR)2) Connect the new drive to the PC using a USB-to-Hard-Drive drive adapter (like the one illustrated below)3) Follow the instructions in this link: http://knowledgebase.macrium.com/display/KNOW/Cloning+a+disk4) Shutdown the PC when done5) Swap the drives and reboot the PC.You should boot from the new drive without any problems.NOTE: To do this easily, the SDD has to be the same capacity as the HDD.  IF you get an SDD that is a lot smaller, then before you do the cloning, you have to shrink the largest partition on the HDD (usually the OS partition), to the size such that it, and the other partitions, fit easily on the SSD. Typical USB-to-Hard-Drive adapter:  Good Luck

Read other 1 answers

Been using Act! for several years on a desktop PC running XP, 32-bit. Just discovered Act! will not run on the new Win7, 64-bit machine we just set up to replace the dead XP machine. I need a replacement for Act!, something that tracks names, dates, appointments, addresses, phone numbers, etc. and that will pop up on-screen reminders.

Suggestions, please. Willing to spend up to $100.

A:Act! will not run on 64-bit -- need a replacement

Read other 6 answers

Hy Hp ,I buy a laptop on22-7-2016 after 3 months it had hard issues which repaired by hp service center but i lost all my data as no had backup.When i bring back to home it start hanging,after that it display start flickering and horizentel line appears on screen. I complain they fix it. Few days later again no display. I buy brandnew laptop to avoid repairs but the laptop is unsed less than 4 months and 2 months for repairs. Still i have 1 years 6 months warrenty.Other thing about the seller he mislead about the specification as it support all kind of wondows like window xp,8 , 10 when i request him to change the window he said it only support window 10.I am too much disappointed from the retailer and hp customer center.I am wondering from last 1 month with no solution i am writing you to fix my issues. As i lost my studies and time.First problem.. after few days of purchase2nd prblem ..on 20 nov 2016Repaired and returned on 5 dec 20163 problem ..next day after repair.And till now 6 jan 2017 laptop is not working and under repair process.ThanksRegardsSam


Hi @Sam2017 Thank you for post and welcome to the HP Supprot forum. I am sorry for the issues you experience with your HP devices. I have asked your post to be escalated and your issues to be checked by a special team inside HP. You may be contacted here in private in the following days. Best regards, 

Read other 2 answers

I'm pretty sure the fan (since the only running parts are the fans) is going out on my desktop PC (intermittent LOUD WHIRRING SOUND). It looks like there are only screws holding the housing and the wires are easy to unplug. This HAS to be a common problem for these things. I'm pretty sure I can do it myself.

I just want to know if these REPLACEMENT FANS are generic, 'one size fits all' items that can be bought at any electronic store?? Or are they actually 'manufacturer specific' parts??

And if I'm getting into something I shouldn't do, PLEASE ADVISE ME!?


Nope simply plug and play.

Just make sure your new one has same pins as old one. Some are 3 pin and some are 4.

Make sure when installing new one, you follow the arrows imprinted on it so you have the right airflow.

Read other 1 answers