Over 1 million tech questions and answers.

Windows Update and now Vista won't load

Q: Windows Update and now Vista won't load

My partner has a Dell Studio 1535 laptop. She just downloaded the latest Windows update. When she restarted the computer it took her to a black screen with a single line of white text indicating that various files were installing. It suddenly stopped at 430 of 49073 files with a message "!! 0xc0190036 !! 430/49073 (mfc42u.dll)" The computer is just hanging. If I power it off and restart it gives the option of a startup repair or to start normally. Starting normally leads to the hanging message; a startup repair fails to identify the issue, other than suggesting maybe a device has recently been attached. This is not the case.

Does anyone have any ideas?

RELEVANCY SCORE 200
Preferred Solution: Windows Update and now Vista won't load

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows Update and now Vista won't load

hello,

have you tried starting in safe mode? if it does you can use system restore, or just uninstall the last update....(start tapping the f8 key after hitting the power button)

good luck

Read other 1 answers
RELEVANCY SCORE 61.2

Hi All,

I was using my laptop last night (Dell Vostro 1710 and using Windows Vista), using only internet via firefox and the steam application, and had no problems prior to switching it off before I went to bed.

Got up this morning, switched on the computer and after loading past the 'Dell' logo it would not load any further.

I am pretty limited with my computer knowledge but have followed some online sites (mainly via Dell and Microsft) which have so far failed to help. I have carried out the following:

Start up Repair - says that the problem may not be fixed automatically and to contact either the computer manufacturer or system administrator. There is only 1 user on the computer so should be no administrator issues. I am currently in Thailand so support via Dell will be very limited or v. expensive (and from what I have read on-line they will recommend that the steps below are followed prior to doing a whole restore of factory settings).

I have attempted a System Restore of various points but receive the following message:
system restore failed due to an unspecified error. The requested operation was made in the context of a transaction that is no longer active

I see from the list of previous available system restore points that a windows update occurred sometime between me switching the computer off and turning it back on this morning. Surely this has to be the problem.

The option to repair OS(C) has also popped up. I have 'ok'd' this, then... Read more

A:Windows Vista will not load following update

Read other 7 answers
RELEVANCY SCORE 59.6

Windows Vista update page will not load with information or work.
When I launch windows update in vista the page comes up blank. It gives the appearance that it is still loading. The only way to get rid of the blank page is in "start task Manager". In Task Manager it (windows update) is shown as running. There are no error messages.

Operating System
Windows Vista Home Premium Service Pack 2 (build 6002)
ZoneAlarm Security Suite Antivirus Version 8.0.298.035
 

A:Solved: Windows Vista update page will not load

Read other 13 answers
RELEVANCY SCORE 59.2

I have been experiencing some issues with vista. For some reason I can't seem to load my personal settings (by right clicking on desktop\personal settings), my properties (from "my computer") or loading the windows update. When I try to do so the screen loads for a fraction of a second and then closes again. No error message or anything is displayed. It just closes... I've tried to enter through the control panel, but with the same result. My computer seems to run fine and haven't been experiencing any virus issues or anything else that could indicate an infection.
Does anyone have any idea what this is caused by?

Jonas
 

Read other answers
RELEVANCY SCORE 59.2

I have been experiencing some issues with vista. For some reason I can't seem to load my personal settings (right clicking on desktop/personal settings), my properties (from "my computer") or loading the windows update. When I try to do so the screen loads for a fraction of a second and then closes again. No error message or anything is displayed. It just closes... I've tried to enter through the control panel, but with the same result. My computer seems to run fine and haven't been experiencing any virus issues or anything else that could indicate an infection.
Does anyone have any idea what this is caused by?

Jonas

Read other answers
RELEVANCY SCORE 52

I've got a Dell Dimension 8300 which came with XP pro.
After a HD crash in March, when I replaced the drive, and since I got it for free because I'd participated in the Beta testing, I installed VISTA Ultimate on the new HD.

However, what everyone and anyone failed to mention in this process was that you have to check to see if you're using the latest BIOS before installing VISTA.

"edward" from Microsoft said that all my problems concerning the system just freezing intermittently (requiring a hard reset every time) are because I need to update the BIOS (he gleaned this from MSINFO32 which he had me send to him.)

So I found a later version of the BIOS for this computer. However, Vista will not allow me to run it.

I continually get a message which says "Flash Access Denied....make sure you're logged in as an administrator" Which I am.
I tried going to the CMD "run as administrator" as well.

I tried turning off all the UAC controls from secpol.msc.

None of it works.

I just want to update the BIOS.

Edward then said...it's not gonna happen with Vista running PERIOD becuase it was supposed to be done prior to loading Vista.

I used the backup utility and have all non windows files backed up on another drive.
MS sent me a new XP SP2 disk with a new license key.

I wanted to install it on a different hard drive, however, Vista won't allow me to do that either.

Is there a way to use the command prompt to force the CD to l... Read more

A:Need to load XP just to update BIOS in VISTA

If it was meant to run XP, then that may the reason Vista is freezing. I tried Vista once and it also freezed alot. I blame it on the older hardware, just like your Dell cam with XP.

Read other 2 answers
RELEVANCY SCORE 51.6

when going to the windows update window,
i get a white blank page and it says "the page failed to load"
i did restart, same issue...

what is it all about?

and another thing, i don't have a Floppy drive in my computer
however a Floppy A: drive is present in "Computer"
how can i remove it from the list?

A:The page failed to load, Vista Update

To remove the floppy drive go into your bios and turn it off.

Do you get any sort of internet problems?

Microsoft Update

Try the link.

Read other 14 answers
RELEVANCY SCORE 51.6

I was manually installing service pack 2 on windows vista because i was told this would sort out my problem with not being able to do any auto updates, then it got to the stage where it shutdown and was installing 1/3 updates then when it got to the 2nd part it crashed and when i restart the laptop nothing happens at all, just a black screen, no boot menu options or anything like that. I dont have a vista disc or anything like that, does anyone have any suggestions as to how i can solve this problem, sorry if my explanation was short and not very detailed.

thanks in advance
 

A:Vista wont load after update error

Um, I believe you will need some kind of disk. Specifically, you'd need either the Vista disc or the ERD disc. You need to launch a repair on your OS, as it seems to be screwed. Can you get into Safe mode? Can you get into the pre-boot menu at all?
 

Read other 2 answers
RELEVANCY SCORE 51.6

Original Post

http://www.bleepingcomputer.com/forums/topic461467.html/page__p__2771159#entry2771159

A few more notes:
Unable to enable firewall
Chrome didnt like DDS
I previously thought combofix was a no go, but after watching GMER try to do it's thing through saved game files (OOTP) that contained over a gig of material, I deleted those saved games. I didnt run combofix again FYI

.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.19120 BrowserJavaVersion: 1.6.0_30
Run by Kyle at 17:47:08 on 2012-07-19
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.3582.2187 [GMT -7:00]
.
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svcho... Read more

A:Unable to update vista, google won't load

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/463055 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

Read other 46 answers
RELEVANCY SCORE 49.6

Update - 9/8/15

Fixed by reinstalling Windows fresh (Again).

I think the problem was caused by installing Windows linked with my Microsoft account and then switching that to a local user. My Microsoft account was registered for the insider program so perhaps I was receiving the fast updates and switching to a local account put me on slow updates which got Windows Update muddled in the confusion.

Original Post

Windows Update appears to be stuck/broken. It displays this loading animation even when left alone for an entire day (See screenshot). All the other panels such as Windows Defender will display their available options, it is only Windows Update that will not show.

This is a clean install of Windows 10 Home.

I have made some alterations to the service configuration, disabling what I had been advised as unnecessary services. I have reverted as many of those changes as I could remember but it is a possibility that one of those changes caused this.

Background Intelligent Transfer service is "Running" and set to "Automatic (Delayed Start)".
Windows Update service is "Running" and set to "Manual (Trigger Start)".

8 Aug 15 - Edit: I have cross referenced services with another computer with an unaltered fresh install of Windows 10 Home. No difference in service configuration was found.

Internet connectivity is stable. Network profile is "Public". No alterations have been made to the default network configuration.

User... Read more

A:Settings > Update & Security > Windows Update - does not load

Hi wadlip,

I have done exactly the same fixes as you - to no avail. Nothing works. I am surprised by a lack of response by Microsoft. In addition to not being able to update, i cannot update the definitions for Windows Defender. This issue has definitely something to do with BITS.
If i stumble over the solution, i'll post here. I have all night to find the fix

Read other 7 answers
RELEVANCY SCORE 48.8

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

A:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

Read other 7 answers
RELEVANCY SCORE 46.4

For over a week, when I start my laptop, it seems to start normally, then I get a screen that says "updates could not load and changes are being undone, don't turn off my computer'.  Does anyone know what is going on?  I am using Windows 8.1.
 
I have Panda Security, and Anti Super Spyware, both paid for.  I just got rid of Win Patrol free, although I have used it on my old laptop without problems.  I have not purchased or downloaded any other programs.
 
Any ideas how I can find out what is going on?

A:Windows update won't load.

I'm just offering some advice. I'm not a Computer expert, just so you know
 
I had this issue on 2 different PCs, both with Windows 8.1.
It would force me into updates, and then say that the updates were unsuccessful and that it is undoing the changes.
It stayed in a restart loop of 'undoing changes' until I went into Safe Mode (using Shift + F8) and did a System Restore.
I have now changed the settings on BOTH computers to not automatically install update. I don't need that kind of trouble! LOL

Read other 1 answers
RELEVANCY SCORE 46.4

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.

Read other answers
RELEVANCY SCORE 46.4

I require updates for mi Windows XP home edition. However, I cannot load the Widows Update page!

I open IE 6 and the page just loads forever!

Any suggestions?
 

A:Cannot load Windows update.

Are you using a firewall and if so, which one?
 

Read other 3 answers
RELEVANCY SCORE 46.4

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.
 

A:windows update will not load

Read other 10 answers
RELEVANCY SCORE 46.4

Windows XP Professional
IE 6 SP1

This workstation had been hit with a virus and malware had been installed.
Cleaned the virus off with Trendmicro and using AdAware SE to clean up the malware.

Now Windows update will not load. IE opens but the window remains white. PC is configured to receive Microsoft updates from our Software update server but can't verify the updates because Windows Update will not come up. IE will browse to other web sites.

Ran HijackThis. The log is below. Any help you can offer will be greatly appreciated.

Logfile of HijackThis v1.99.1
Scan saved at 9:00:40 AM, on 3/16/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\system32\ntvdm.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\WINDOWS\System32\NWTRAY.EXE
C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe
C:\Program Files\Winamp\Winampa.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Adobe\Acrobat 4.0\Distillr\AcroTray.exe
C:\Program Files\Conversions Plus\MacName.exe
C:\Program Files\WinZip\WZQKPICK.EXE
C:\WINDOWS\System32\NALWIN32.EXE
C:\Temp\hijackthis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer,SearchURL = http://www.popupsearches.com/sidesearch.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://smbusiness.dellnet.com/
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.capcitypr... Read more

A:Windows Update will not load

You have been hit by the new Bube.d (aka Win32.Beavis) virus which severely messes with some Windows settings,including the update feature.

Save the BOLD to notepad,as Fix.reg as"Type" all files

=====================================

Windows Registry Editor Version 5.00

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects\LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate\DisableWindowsUpdateAccess]

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoWindowsUpdate"=dword:00000000

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoWindowsUpdate"=dword:00000000

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoUpdate"=dword:00000000
"AUOptions"=dword:00000000

[-HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate]
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate]

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoDevMgrUpdate"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"NoUpdateCheck"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate]
"DisableWindowsUpdateAccess"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
&qu... Read more

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I was sent here by Chemist who was a great help in spyware removal. I just have a windows update that tries to load on shutdown, but fails every time. How can I get the update information to you? I am a techie rating of about 3 out of 10, but I try to follow innstructions. Thanks. :)

Read other answers
RELEVANCY SCORE 46

So I can see there are updates for Vista, I see the icon on my task bar... but I can't actually update it. When it opens the Windows Update window there's no text at all... I can still obviously see the "get updates" or w/e it's called button, but even if I click it it just doesn't update, it just constantly shows it updating (I doubt the update will take me 5+ hours on a cable connection, considering in the past the longest it's ever taken has been like 5 minutes...)

A:Can't update Vista (no text in Vista Windows Update...)

bump...

Read other 1 answers
RELEVANCY SCORE 46

I recently installed Windows XP and all my programs on a new hard drive, as the old one would not boot. Last week I received a "Generic host process for Win32 services" error. My machine locked up, and I had to restart. Then I started having issues where Windows would not load or would take a very long time. I am able to start Windows in Safe Mode, but it takes much longer than it should.

Now sometimes when starting IE or Firefox or when surfing, new tabs are started on spammy webpages. Other times, IE or Firefox will not start. I also cannot go to the Windows Update site.

Neither Malwarebytes nor Avast find any instance of infection.

AVG says that it finds 6 infections and repairs 3. Just in case it would help, here is that part of the AVG log file:
(C:\WINDOWS\system32\svchost.exe (3440):\memory_001a0000 Trojan horse Agent_r.XJ
C:\WINDOWS\system32\svchost.exe (3440) Trojan horse Agent_r.XJ Object was removed.
C:\Program Files\Internet Explorer\iexplore.exe (2652):\memory_00260000 Trojan horse Agent_r.XJ
C:\Program Files\Internet Explorer\iexplore.exe (2652) Trojan horse Agent_r.XJ Object was removed.
C:\WINDOWS\explorer.exe (1484):\memory_001a0000 Trojan horse Agent_r.XJ
C:\WINDOWS\explorer.exe (1484) Trojan horse Agent_r.XJ Object was removed.)

Thanks for any help you can provide!
coxpac30

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:02:07 PM, on 5/9/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.1870... Read more

A:Windows Update blocked, browser redirects, slow to load Windows

Is there anyone out there that can help me, or can I provide any additional information?
 

Read other 1 answers
RELEVANCY SCORE 46

I am constantly having redirects and new tabs spontaneously open to spammy websites in both IE and Firefox. I cannot get to Windows Update, it either says it can't connect or takes me to a fake search engine page. Windows is very slow to load at start, and after working for a little while, I tend to get Generic Host Process for Win32 Services errors, after which my machine locks up.

Malwarebytes has not found anything. AVG says it finds 6 infections and fixes 3. The infections are in svchost.exe, iexplorer.exe, and explorer.exe, where it says that a Trojan horse Agent_r.XJ Object was removed from each.

I do have access to my Windows XP Install disk.

Thanks so much for your help,
coxpac30
=======================================================

.
DDS (Ver_11-05-19.01) - NTFSx86 NETWORK
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_25
Run by mcox at 15:41:25 on 2011-05-25
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1605 [GMT -5:00]
.
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox\plugin-container.exe
C:\Documents and Settings\mcox\Desktop\dds.com
C:\WINDOWS\system32\WSCRIPT.exe
.
============== Pseudo HJT Report ===============
.
uInternet Settings,ProxyOverride = *.local
BHO: AcroIEHlprObj Class: {06849e9f-c8d7... Read more

A:Browser redirects, Windows Update blocked, slow to load Windows

Hello, Welcome to TSF.
I'm nasdaq and will be helping you.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your logs are clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.

Please do not install or uninstall any programs, or run any other scanners or software, unless I specifically ask you to do so. Also please copy and paste logs into the thread, rather than add them as attachments.
===

Please download ComboFix from one of these locations:

Link 1
Link 2

* IMPORTANT !!! Save ComboFix.exe to your Desktop
Disable your Anti-Virus and Anti-Spyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this ... Read more

Read other 15 answers
RELEVANCY SCORE 46

This Toshiba computer had the Windows 7 Updated loaded onto it. Now when the computer starts up I receive the Safe Mode etc...options. I select Start Normally and from there is when it takes about an hour or more to load windows.

When the system finally loads, to click on anything takes about 10 minutes or more to populate anything.

A loading error message is received in the bottom right hand corner which says something about logging in as administrator and loading a disc.

This is my friends computer(previously mine) and I need to get to the pictures and save them in case I'm going to need to reset anything. If someone can tell me how to get at the pictures faster or fixing this without wiping out the pics that would be great. Much appreciated!! Tiff

A:Download Update for Windows 7, now comp takes about an hour to load windows

Right now I am in safe mode and it's seconds faster but not much and i did not receive that error in the bottom right corner.

Read other 3 answers
RELEVANCY SCORE 46

deleted. Nevermind, fixed it.

Read other answers
RELEVANCY SCORE 46

Hi Guys
I have a number of windows XP home edition updates which have failed to load. If I click shut down at the end of session then my pc freezes. If I shut down without loading theem all seems okay. Is there a way I can delete these update and start again.
Thanking you in anticipation
Ron Thayre
 

A:Windows update that fail to load

Try to restore your computer before the updates were downloaded using system restore. You can then download them again.

If you need more information on how to do a system restore just ask.

Good Luck
 

Read other 1 answers
RELEVANCY SCORE 46

Hello, I just rebuilt my PC and installed XP SP3, IE 8, and FF 3.6. Automatic updates are working (i.e. updates are downloaded and installed). However, I cannot get to the Windows Update webpage on this machine (http://windowsupdate.microsoft.com/). I've read forums that say this is due to a firewall issue, but I disabled my firewall and still cannot access the page. I have not setup any other special network rules/restrictions. I can access other webpages without problems. It could be a virus I suppose but I just rebuilt the system, so that makes me somewhat skeptical. Any thoughts? Thanks everyone!

Read other answers
RELEVANCY SCORE 46

I recently reloaded xp on my computer to fix an error created by another piece of software. Since than I cannot get my system to accept security updates from Microsoft. The down load works, but I get an error that indicates none of the updates can be installed. I am currently missing 70 updates. I have tried to load one at a time in the event I did not reserve enough disk space, but I still get the same results. Do you have any ideas how this can be fixed.
 

A:Cannot load latest windows update

Try this website:

http://www.getautopatcher.com/

It allows you to download all the patches (about 300 MB) and install what you need. I have a security camera pc(vendor configured) that does not allow access to the windows update website and I used this tool to patch the system. Hope it helps solve your issue.
 

Read other 1 answers
RELEVANCY SCORE 46

Repair didnt work..finally got it to do system restore,

Windows 7 Ultimate x32

ran sfc,chkdsk,malwarebytes all good results
One of these is the culprit
http://i50.tinypic.com/33v2bys.png

If anyone knows which one with out me having to install and see for each one

A:Windows wouldnt load after update

Hello Taj and welcome to the forums

Could you follow these instructions please?

Windows Genuine and Activation Issue Posting Instructions

I don't think it would be possible for us to tell from that picture which update is causing the problems. Just install them one by one

Tom

Read other 3 answers
RELEVANCY SCORE 46

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.
 
I tried those commands from windows site
 
bootrec /fixmbr and other bootrec
 
and in config, 
 
ren system syste.001 this worked but
 
ren software software.001
 
this gave errorprocess in use, can not be accessed.
 
How can i rescue? I dont have any rescue disc or etc.
 
Desktop computer, 32 bit probably.

A:Can not load windows , update error to 8.1

Is the Windows 8.1 disc 64 bit version?  Either bad disc, or wrong version for what you have, and what he burnt to the disc.  I have run into where I have had to turn off Secure boot in the UEFI bios.  It helps to know what the manufacturer & model# of your computer that you have.

Read other 5 answers
RELEVANCY SCORE 46

I have a Windows 7 64-bit machine that appears to be infected with malware. No automatic updates work; when I check the services, the Windows Update Service is not running even though it is set to Automatic. I cannot get it to start; the error code is 93.

A copy of the HijackThis logfile is attached.

I believe the Admin user has been hijacked, and any attempts to delete suspicious items through HiJackThis do not work.

The items containing lsass look to be suspicious, for example.

Please help.

A:Windows update service will not load

Hello,Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then post them in a reply to this topic by using the Add Reply button.If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Please note that I am not a member of the Malware Removal Team and will not be assisting you in removing the infection. I'm simply helping you to post the information they need in order to assist you.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.Orange Blossom

Read other 3 answers
RELEVANCY SCORE 46

I can not load windows new updater. Every time I try it just starts back at the start down load page all over again.

I also can't load DirectX 9.0b. It says that I have ver 8.1 . A little box that reads "Software Installation" on the top bar says. The software you are installing has not passed Windows Logo testing to verify it's compatibility with Windows XP.

This software will not be installed. Contact your system administor.

The next little box that pops up says.

"DirectX Setup" on the top blue bar and then below it says. DirectX did not copy a required file.
Any help I can get on this stuff would be greatly appreciated.
 

A:Can't load Windows update or DirectX 9.0b.

Read other 12 answers
RELEVANCY SCORE 46

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

A:Can not load windows , update error to 8.1

Reboot then follow this guide. To get to the troubleshoot RE. How to use the Windows 8 System Recovery Environment Command Prompt In command prompt type in then hit enter.


Code:
rstrui.exe
Select a restore point to before you tried updating Windows 8 to 8.1.

Read other 1 answers
RELEVANCY SCORE 46

Hello everyone,

When I try to load the menu it won't load, it just looks like this and stays like that for ever, nothing will pop up. Here's a screenshot.

Imgur: The most awesome images on the Internet

A:Windows update menu won't load.

Anyone?

Read other 0 answers
RELEVANCY SCORE 46

I just upgraded to Windows Vista 64 over the weekend as a clean install. I ran Windows Update and got everything installed fine. However, shortly after Windows Update failed to open when I clicked the icon. I see a window start to open on the desktop and then disappear. No errors show up. If I go into the Control Panel->Security and click "Turn Automatic Updating On or Off" I receive the following error: Windows cannot find 'shell:::{26EE0668-A00A-44D7-BEB064C98683}\10\::{36eef7db-88ad-4e81...\pageSettings'. Make sure you typed the name correctly, and then try again.

Any assistance would be greatly appreciated.

Read other answers
RELEVANCY SCORE 46

I can not reach Windows Update at the automatically inserted url. The
Windows "flag" does not wave automatically and only very briefly when I click 'go.'
Solution? Thanks.
 

A:Solved: Windows Update will not load

Can you see other web sites? Do you have a firewall and Anti Virus?
 

Read other 3 answers
RELEVANCY SCORE 46

I have Windows Vista Home Premium (x64) Service Pack 1 and the Windows update page will not load. No error messages it will not load. Any Microsoft help or support that leads to anything connected with Windows update will not load. I thought I was getting auto updates, but I am missing 8 important to critical updates. I have even tried downloading IE8 but it gets stuck on the Windows update.

What to do, what to do, what to do?

TIA
 

A:Windows update page will not load.

I was in your situation with Vista 32 for 3 months. First thing is to scan for malicious software/rootkits that may have turned off update. If you are confident that is not the cause, then you will need to rename the SoftwareDistribution folder in the Windows directory, something like SoftwareDistributionOld. You may have to first turnoff update in the Services (Administrative Tools) to do this. Reboot, and Update will recreate your SoftwareDistribution folder and you "may" then be able to update. Otherwise, like in my situation, you have a lot of heartache and google searching to do. I had to run a bits.reg routine to fix my bits (background Intelligent Transfer Services) in my registry; then I had to reregister a boatload of dll's. TurboTax 2008 had poorly installed and corrupted a number of files and registry entries.

Good luck.....
 

Read other 1 answers
RELEVANCY SCORE 46

Im fixing a pc for a friend. Tried the virus/spyware sweeps and they deleted a few. Nothing new found but any time I try to goto windows update is loads the msn.com page. Here is a HiJack log file. Any help would be great. Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:23:18 PM, on 7/1/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Panda Software\Panda Platinum 2006 Internet Security\TPSrv.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Panda Software\Panda Platinum 2006 Internet Security\pavsrv51.exe
C:\Program Files\Panda Software\Panda Platinum 2006 Internet Security\AVENGINE.EXE
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
c:\program files\panda software\panda platinum 2006 internet security\firewall\PNMSRV.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\arservice.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DE... Read more

Read other answers
RELEVANCY SCORE 46

I'm having a problem with Windows Update. When I go to access the update site, it says done but with errors on page. Nothing shows up at all, just a blank screen. I have a feeling it has something to do with all the changes I had to make to get rid of lots of spyware/malware. If anyone could offer some thoughts and possible solutions, I'd really appreciate it. I haven't been able to update Windows in quite a while.

I'm running XP Pro. If any other information is needed, please let me know. Thanks to all who help in advance.
 

A:Solved: Can't load Windows Update

Visit http://www.softwarepatch.com for latest windows downloads....or try doing a repair on your OS using the WindowsXP cd.
 

Read other 2 answers
RELEVANCY SCORE 46

When I try to check for updates, the page fails to load. My PC has Win 7 Service Pack 1 64 bit OS. I don't know what to do and would appreciate your suggestions. Thank you for your assistance!

A:Windows Update Fails to Load

Hello there, 
 
Have you launched "Windows Update troubleshooter" and see if the issue still persists? http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
 
 

Keep us posted

Read other 1 answers
RELEVANCY SCORE 46

Running Win XP, SP-3, IE and Firefox 3.5.3, browsers will not load Microsoft or Windows Update page(s).
Error mssg: Internet Explorer cannot display the webpage in IE and

"Server not found" in Firefox.

Have tried re-registering various files, among them:

Hregsvr32.exe c:\windows\system32\wuweb.dll

regsvr32.exe c:\windows\system32\wups2.dll

regsvr32.exe c:\windows\system32\wups.dll

regsvr32.exe c:\windows\system32\wucltui.dll

regsvr32.exe c:\windows\system32\wuaueng1.dll

regsvr32.exe c:\windows\system32\wuaueng.dll

regsvr32.exe c:\windows\system32\wuapi.dll

No good, yet.
Below is Hijack This log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:38:42 PM, on 11/11/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Panda USB Vaccine\USBVaccine.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\WINDOWS\system32\igfxsrvc.exe
C:\WINDOWS\system32\ICO.EXE
C:\Program Files\Intel\Intel Matrix Storage Manager\Iaanotif.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrotray.exe
C:\Program Files\CyberLink\PowerDVD DX\PDVDDXSrv.exe
C:\Program File... Read more

Read other answers
RELEVANCY SCORE 46

Hi,My first post here and I'm wondering if someone can help with my problem since I've completely run out of ideas...For the last few months I have been unable to load Windows Update, Windows Search, or the Personalize Desktop option when right clicking on the desktop.When I click on these items a window will open for a second (completely white) and then close instantly. There's seemingly no way around this and the same is true in Safe Mode.Suspecting a virus, trojan or similar I have run a number of scans (AVG, SpyBot, Ad Aware, Malware Bytes, Kaspersky, Norton, command line sfc, etc). Apart from a few tracking cookies nothing has been found. Running HijackThis also revealed nothing untoward.I've search the MS Knowledge base extensively and not found anything. There are similar problems regarding specific error numbers but I do not get one, just a window that opens then quickly closes. I have tried MS's own FixIt tool for Windows Update and it didn't make any difference.I can still search using the quick search bar in the start menu but clicking "search everywhere" does nothing. I can still change my desktop background by right clicking on an image and choosing "set as desktop background".I cannot run Windows Update. All of my other software is completely up to date.I still suspect that this is some sort of very clever trojan rather than an OS error but since I'm not getting any error messages I can't be sure.Any advice wou... Read more

A:Windows Update/Windows Search/Personalize Desktop will not load

Can you run regedit?

Access the Microsoft website?

Update your installed AV program?

What other system anomalies exist?

Louis

Read other 3 answers
RELEVANCY SCORE 45.6

My G550 Laptop now won't load Windows10 after the latest enforced update. I get the initial Lenovo screen with F2 options etc then the blue Windows logo followed by Attempting to recover installation then Restoring your previous version of Windows then back to the Lenovo screen. Any thoughts?

Read other answers
RELEVANCY SCORE 45.6

I did a windows update today, all went fine, but the next time I started up I got a message

"The system found unauthorized changes on the firmware, operating system or UEFI drivers"

Could get into BIOS and that was it. No changes made any difference. Drives detected fine. tried the windows disk to make repairs, and got the message it was not a compatible windows installation. Tried a google search and found the solution straightaway- seems its common.
There is a win update that causes the problem (thanks MS, great support there). To solve it, go to bios, advanced, find "secure boot" (varies on systems) and ser to "Other OS". Sounds weird but I tried and all was good again.

Putting this up as an assist for others- the worst part being that its a problem windows creates, and without knowing the fix, doubt it would get found.
 

Read other answers
RELEVANCY SCORE 45.6

After installing most recent critical update, my computer restarts and I get a balck screen with a little window that says "Setting up personalized settings Desktop Update" or something of the like (may have left a word out) and it never goes away. I can pull up task manager, end task, but explorer.exe also ends. If I then run task explorer.exe, the little window comes back.

I've system restored to before the update and I'm fine, then windows reinstalls the update and I have the same problem. UAC is off, i'm on admin account.

What do?

A:Windows Desktop won't load after most recent update

Use system restore and set update to not to do automatic. When the update comes just right click on it then, hide.
Windows Update Settings - Change

http://www.sevenforums.com/windows-u...n-updates.html

Read other 6 answers
RELEVANCY SCORE 45.6

Hello
 
I have windows 7 running on a HP Pavilion dm4 laptop.  Lately windows is very slow to start -close to 5 minutes just to get to the log in screen.  Also, the updates will not install.  I am getting various error messages and when I try to look them up I get general information.  
 
I have done a disk cleanup, defragged and removed some unneeded programs.  I am going to do the Security Tango also.  
 
What should I try next?
 
Ann

A:Windows is extremely slow to load and won't update

Welcome Ann,
If your self help attempts don't clear the problem [I suspect that they may not]. Or if you can't download, install, update and run any of the scanners please quit trying by yourself and go to the Am I Infected forum and get expert assistance.
Continuing to try different things without a plan can make things worse.
 
Dick

Read other 51 answers
RELEVANCY SCORE 45.6

I installed the latest Windows updates this morning and my laptop is now taking an age to load.  No messages about updates installing or anything like that.
 
Once it finally uploads, I'm looking at the old Desktop, and I can't get the Apps screen to show.  Nor do the Settings come up when I go to the bottom right-hand corner.  
 
I am able to use most things I need by using the Desktop but it's obvious there's something not right!  

A:Since latest update, Windows 8.1 features will not load.

This may seem overly simplistic, but have you tried restarting the computer?
 
If this doesn't resolve the issue, go to the Control Panel and click/tap on Programs and Features.
 
In the upper left portion of the window click on View installed updates.
 
These updates are dated, so you should have no problem finding the update/s that you installed last.
 
Post what the update/s are.
 
Edit:  If there were no integrity issues found in the scan a log may not be available.

Read other 10 answers
RELEVANCY SCORE 45.6

Well windows was updating and i restarted because of an emergency and now the applications wont load. Explorer stops responding. Winamp opens after 10 minutes. Tried running sfc scan but it didn't help? What do i do?

A:Restarted during Windows update and now applications won't load

Ok now i decided to do a repair installation but every time i click on setup.exe it never starts and just keeps loading. Restarted in safe mode and the setup runs but it says that i cant do a repair install in safe mode. I then go to msconfig and do a selective startup. Setup starts but i get an error "Windows cannot determine the hard disk". So frustrating? Any way to do it?

Read other 4 answers
RELEVANCY SCORE 45.6

I'm working on my mom's computer remotely via LogMeIn (Home Premium SP2). A persistent problem is an inability to update the system due to the Windows Update giving me a "The page failed to load" error. This happens after I click on the "15 optional updates are available" hyperlink in the Windows Update pane. There are no critical updates.

An initial Google search returned the most common cause as being "WindowBlinds" by Stardock. This program, however, is not installed on her computer (verified by a search of programs in the "All Programs" links, "Program Files" folder, "Uninstall or change a program", and a search for "stardock" in the registry.

"sfc /scannow" in administrative mode on the command line failed to return any errors.

I also went to Microsoft's relevant Knowledge Base article here and attempted to use the Fix It program to fix Windows Update. The program successfully ran and fixed the files that were damaged (whatever they happened to be), but this did not solve the issue.

Finally, I removed threats using SUPERAntiSpyware, reregistered some .dll files as recommended by Microsoft (IMPORTANT NOTE: Some of them failed), and restarted with non-essential services disabled and startup items disabled.
 

A:Windows Update > The page failed to load

bump
 

Read other 1 answers