Over 1 million tech questions and answers.

BSOD - Laptop restarts when waking from sleep mode

Q: BSOD - Laptop restarts when waking from sleep mode

Hello.

After upgrading from windows 8 to windows 10, the laptop wont wake up correctly and just restart.

I have an Asus Q551LN

* Upgraded the latest drivers of everything, including the intel hd graphics, the same with the nvidia integrated ones and then downgraded.
* I did a clean install of my OS.
* Checked and settled many options in the power management, recommended from other users/forums/etc.
* Disabled and Enabled again the Intel Management Engine
* Flashed new BIOS firmware.

Nothing worked for me.

If someone can help me clarify the problem, I would be very grateful.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: BSOD - Laptop restarts when waking from sleep mode

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 90

This is a strange issue that started happening to me a few weeks ago. On my laptop, I put the computer to sleep, then close the lid. To wake it up, I just open the lid. Recently, about 1/4 of the time I wake up my computer, the lock screen does not appear, but instead it seems that my computer crashes then restarts. I don't have any USB devices plugged into my laptop, just the power cord. Does anyone know how to fix this?

A:Laptop crashes/restarts when waking up from sleep

Does anyone have any ideas? This is frustrating.

Read other 1 answers
RELEVANCY SCORE 90

Hi all, My t450s restarts instead of waking from sleep when it's been left in sleep for a prolonged period. It has happened multiple times and I cannot figure out what the issue is. It seems to only happen when the laptop is not plugged in to AC. That is, it always boots fine when it's waking while it's plugged in. What gives? How can I fix this? Cheers,

A:T450s laptop restarts instead of waking from sleep

Hi,
 
You're sure it's cold booting and not resuming from hibernation?
 
Have you checked you sleep settings to make sure it's not set to hibernate after a set time when on battery?  That's how I have mine set:  sleep and if that goes on for an extended time, hibernate.
 
Z.

Read other 2 answers
RELEVANCY SCORE 85.6

After running the log collector program, here is the zip file it produced. Please help me find what caused this.

A:BSOD while waking from sleep mode

Upload your MSINFO32.nfo file. Ii is highly needed to suggest you anything depending on this situation.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
____________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80044e96f0, fffff80003c073d8, fffffa800650fc10}

Unable to load image \SystemRoot\system32\DRIVERS\amd_xata.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be lo... Read more

Read other 1 answers
RELEVANCY SCORE 85.6

Seems to happen every time I wake the computer from sleep mode. Appreciate any advice.

Read other answers
RELEVANCY SCORE 85.6

well i have a fairly new hp pavilion G series laptop less then 3 months old and everything was fine till about a week ago. it started everytime i closed the lid and left it in sleep mode then i come back after about an hour or so and open it seems to be coming back on then just restarts and it loads windows and restarts itself again and says windows has failed to load trying to find a fix or something in that direction not 100% sure what it says. but now it just blue screens when i wake it up from sleep mode.

(i still have the year warenty but im not sure if this would be coverd)
 

A:bsod upon waking up from sleep mode

Read other 16 answers
RELEVANCY SCORE 85.6

Hello,
I keep getting BSODs when my computer wakes up from sleep mode. It doesn't happen every time, but it does seem to be more likely if the computer has been asleep for a long time, say overnight. This happened a few months ago, and I posted to this forum, which helped me fix it. Everything worked fine until the last few weeks or so, when it started happening again. Please find my diagnostic file attached. Here's the info Windows gives me upon rebooting:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000003
BCP2: FFFFF8A01ECF1470
BCP3: FFFFF8A01ECF1470
BCP4: EFFF7ADB7B6AFAFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

I would greatly appreciate any assistance you can provide. Thanks!

A:BSOD upon waking up from sleep mode

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any sort of disc cleanup program (CCleaner, TuneUp or the inbuilt Disk Cleanup) befor you upload another zip.

Read other 2 answers
RELEVANCY SCORE 85.6

Hi, as the title says ive been having repeated problems with Sleep Mode, i have set ACPI Standby State to S3 & there are no overclocking settings enabled, it could be related to my hardrive, i have three with one being an SSD (Samsung 840 Pro 128gb) that has the OS, (Samsung HD103SJ) & (Samsung HD753LJ) for storage, the driver is the latest one, im also using a Gigabyte EP35-DS3R with a custom Bios F5 update that Gigabyte sent me to help fix an error with sleep mode a few years back before i upgraded to an SSD, its known to be buggy when overclocking as it can cycle thru wake up / sleep when overclocking but i dont bother with that anyway GA-EP35-DS3R Rev.2.1 - NOT GOING TO OVERCLOCK. - AnandTech Forums

By going into bios & resetting Stanby State to S3 seems to fix it but after a while the BSOD returns

Included is the Zip file containing the logs

Also when i reboot, by pressing delete it doesn't always load up the Bios screen but instead the Windows Safety Mode?

A:BSOD Waking UP From Sleep Mode

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80089d34e0, fffff8800f42e93c, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+15393c )

Followup: MachineOwner
---------

0: kd> lmvm nvlddmkm
start end module name
fffff880`0f2db000 fffff880`0ff69000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Jul 03 03:12:02 2014 (53B4446A)
CheckSum: 00C4C7C9
ImageSize: 00C8E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Check for an updated driver for your NVidia card.

Also, see this:
STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Read other 2 answers
RELEVANCY SCORE 85.6

I just built a new computer:
Since first fired up it blue screens every time it comes out of sleep mode.
I've checked all my drivers and all report being up to date.
Currently I have sleep mode turned off and the computer is running reliably.
I've attached the required files.
Thanks for any assistance.
GaffOz

A:BSOD waking from sleep mode

Perfmon shows a problem with the Cyberlink Power Control component - please uninstall the Cyberlink software from your system.





Quote:
Error
Symptom:[IMG]res://wdc.dll/error.gif[/IMG]
Device is not present, not working properly, or does not have all of its drivers installed.Cause:A device has a configuration problem that prevents it from working properly.Details:The device, Power Control [2011/06/06 09:33:15], is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ROOT\LEGACY_{B154377D-700F-42CC-9474-23858FBDF4BD}\0000.Resolution:1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.Related:Explanation of Error Codes Generated by Device Manager
Manage Devices in Windows


Your GigaByte ET6 (EasyTune6) driver dates from 2006 - and that's a known BSOD cause in Win7 systems.
Please uninstall the program and see if that stops the BSOD's

OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are in... Read more

Read other 6 answers
RELEVANCY SCORE 85.6

Hi everyone!
I recently experienced a blue screen of death when waking up my PC from sleep mode and do not know what has caused it. I've followed the instructions by using the DM log collector and would greatly appreciate anyone's help. If you require any more info please do not hesitate to ask. Thanks!

Read other answers
RELEVANCY SCORE 85.6

Usually I get this when waking up from sleep mode. I've gotten BSODs randomly as well, not really doing anything.

I've tested my RAM, and torture tested my CPU and GPU and they seem solid.

Any ideas?

A:BSOD waking up from sleep mode

Run Disk Check on your Hard Drive for file system errors and bad sectors on it.

 Hard Drive Diagnostics
Double click and open my computer.
Right click on desired drive and hit properties.
Click on tools tab and Check now.

Read complete instructions on the tutorial: Disk Check

Other Tests:

 




Upload a screenshot of your hard disk using Crystal Disk Info.
Make a hard drive test from the hard drive manufacturers website.
Test your Hard Drive with SeaTools.

Read other 9 answers
RELEVANCY SCORE 85.6

hi guys i got a BSOD when i wake up my pc from sleep mode the error name is DRIVER_IRQL_NOT_LESS_OR_EQUAL (xmudaxp.sys)
here is the file for minidump please help me thanks

A:BSOD from waking up sleep mode

can someone please help me thanks!!

Read other 9 answers
RELEVANCY SCORE 85.6

Hello all, I'm having a headache of a time trying to keep my computer from re-booting after sleep mode. My computer wakes but goes directly to BSOD. I used the app Bluescreenview and it points to this file ntoskrnl.exe generating this this bug check string: (IRQL_NOT_LESS_OR_EQUAL, CRITICAL_OBJECT_TERMINATION).
I dont know what software this file is associated with, but I've searched on this forum and found this it to be a real problem. Any help would be appreciated.

Regards,
Asamp

A:BSOD after waking from sleep mode

It seems that I solved my own problem. I read on another board that the Win7 o/s has bugs using sleep mode after 4gb of memory, and I have 8gb. So, I set everything up using hibernation mode, and no more bsod.

Read other 1 answers
RELEVANCY SCORE 84.8

I had just finished about 4 hours of gaming and put my computer in sleep mode while I did some other personal things. Once I came back, I awoke my computer and when attempting to put in my log passcode, my computer froze. After about 1 minute, nothing had changed, so I forced restart my computer.

My computer started up perfectly fine, no issues. Just to make sure, I tried restarting my computer again. This time I restarted my computer properly from the windows > power >restart

.... This is where the BSOD happened. The BSOD occurred at the screen where the system says it is restarting and it shows the little moving around in a circle. When the BSOD screen appeard, the error: DPC WATCH DOG VIOLATION

This has only happened once so far. The only programs running were: Avast Free Antivirus, Blizzard Launcher, Steam Launcher, ICloud Drive, and Ccleaner.

Last night, 05/28/2016, I did install the latest Driver (16.5.3) for my video card from the AMD website. Other than that, I did not update anything else on my computer.

The DM Log Collector file is attached. DESKTOP-NO3NN41-Sun_05_29_2016_222144_13.zip

Read other answers
RELEVANCY SCORE 84.8

Hi this is the first time time ive done this so please be patient with me.
For the past couple weeks ive been having BSODs after taking my computer out of sleep mode or when i have closed the lid and opened it back up.

ive already run memtest and it said i have no errors and frankly im at wits end trying to figure this out so could somebody please help me.

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64bit
- the original installed OS on the system? came with windows 7 on it
- an OEM or full retail version? oem
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? a little over a year old
- What is the age of OS installation (have you re-installed the OS?


i attached the minidumps (hopefully correctly)

A:BSOD after waking computer from sleep mode

The file you zipped was a shortcut to the minidumps folder. Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with the crash logs so we may assist you.

Read other 9 answers
RELEVANCY SCORE 84.8

Hi all. Im new here.
Today while i left the house i turned my Asus K52F notebook into Sleep mode. After a few hours i came back and wanted to continue my unfinished job but i get the Startup repair screen. I started it in normal mode and i found out what happened. I started googling and i followed some instructions what to do. I tried many things but no-one of them worked thats why i'm posting here my weird problem.

I never used Sleep mode before so i don't know if this is a new or a long-standing problem. When i put it into Sleep mode and it's idle i close the lid. After opening the lid and turning the notebook on everytime is the same again...getting the BSOD error window after boot-up.

So i started googling and downloaded and installed Windows SDK. With Dumpchk & WinDbg Im analyzed the minidump file. The results get me puzzled:
Dumpchk was telling me that the bad driver is probably ntoskrnl.exe ( nt+75bc0 )
WinDbg was telling me that the bad driver is probably pci.sys
So after this i tried Driver Verifier with all drivers which wasnt Microsoft's + the two drivers from DumpChk and WinDbg (ntoskrnl & pci.sys)

I restarted notebook and at windows loading i get a BSOD screen. It was the Daemon Tools's driver: dtsoftbus01.sys
After uninstalling DT and the driver from the DevMgmt i tried Verifier again. My notebook booted up without problems. But it didn't fixed the error. The PC got again the BSOD at wake-up.

I was googling hours about this and im realized that... Read more

A:Getting BSOD after waking up my notebook from sleep mode

So you have uninstalled Daemon Tools? A good move indeed.

The later two DV enabled crash dumps are pointing to BlueSoleil Bluetooth Plug and Play driver.

Code:
BugCheck C9, {24c, fffff880016773a0, fffff98072e00dc0, 103}

Unable to load image \SystemRoot\System32\Drivers\vbtenum.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for vbtenum.sys
*** ERROR: Module load completed but symbols could not be loaded for vbtenum.sys
Probably caused by : vbtenum.sys ( vbtenum+33a0 )

Followup: MachineOwner
---------
And the driver is of Jurassic age.

Code:
fffff880`01674000 fffff880`01678680 vbtenum T (no symbols)
Loaded symbol image file: vbtenum.sys
Image path: \SystemRoot\System32\Drivers\vbtenum.sys
Image name: vbtenum.sys
Timestamp: Mon Mar 05 17:47:00 2007 (45EC0A3C)
CheckSum: 0000886A
ImageSize: 00004680
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Disable Bluetooth.

But, the BSOD is happening due to Qualcomm Atheros AR9285 Wireless Network Adapter. The mainfold of the issue, pci.sys error.

Code:
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8007067050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\athrx.sys, Win32 error 0n2
... Read more

Read other 1 answers
RELEVANCY SCORE 84.8

(I've searched around and have seen this issue posted around on the site, but since there might be multiple causes for this, I thought it best to post this new topic. If this is incorrect, simply link me to a similar thread on the issue, and I'll post there/try that solution. Whatever makes more sense.)

Simply put: almost every time my computer has woken up from sleep mode, it has woken up into a BSOD. I can't name any new software or hardware I have installed that might have brought this about. I bought it new fairly recently, and the only hardware I put in it are a microphone and a mouse. The closest I can think would be installing DirectX 9 as part of Civ V, but since the problem comes from before this event, I doubt that is the cause. I have tried installing updates, hoping that might fix this, but this has not helped. Here's a link to the ZIP file the Diagnostic on this site has given me: https://www.dropbox.com/s/w0he0h4ryg...st%20crash.zip

Also, this may not be related, but for completeness, I'll list another issue that might possibly be related. Sometimes, after restarting my computer, Japanese characters fail to display properly in a lot of programs. I can see it just fine in Chrome, but if I mouse over Chrome to preview the windows, for instance, and the page title is in Japanese, I simply get the "couldn't figure out what this is" boxes.

A:Getting BSOD when waking from sleep mode (Windows 7 64 bit).

Welcome to SevenForums

Problematic software:

Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\Spybot - Search & Destroy Public:Start Menu\Programs\Spybot - Search & Destroy Public

McAfee is a frequent cause of BSODs (specially in the case you describe). Please uninstall it using its removal tool. (You may install it back later if we know that it wasn't the cause of your BSODs.McAfee Removal Tool - McAfee Uninstaller
Also note that you have MSE and MBAM which are by far the best combination and recommended by many on our website. Please uninstall Spybot as well. It's known to slow down the system.

Uninstall using the free version of Revo Uninstaller in Advanced Mode:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Free up your start-up, keep nothing except the antivirus.Startup Programs - Change
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the... Read more

Read other 3 answers
RELEVANCY SCORE 84.8

The problem I have is when ever I try to start my laptop up from sleep/hibernate mode, I get the BSOD. Its been happening for awhile now and I was wondering if it could be fixed without fixing the hard drive.

Read other answers
RELEVANCY SCORE 84.8

Hello,

I have been getting these random crashes for a few months now. I usually put my computer to Sleep overnight or when I'm away from the keyboard for a while, but sometimes the computer wakes from sleep in a fresh boot and gives the black-and-white "Windows did not shut down correctly" screen, with the usual options of repair, resuming normal boot, and what have you. Repairing does not seem to work. Resuming booting makes the computer boot normally enough, so this is a nuisance but not tremendously catastrophic. I am mostly wondering if I'm having an incoming hardware failure or something that I should be aware of.

Here are the vitals of my configuration:

OS: Windows 7 Home Premium x64, bought separately
MoBo: ASRock P8P67 Pro3
CPU: Intel Core i5-2500K. I have been running this at 4.0 GHz, but have returned it back to original clock speed (3.3 GHz) to see if that helps.
GPU: MSI GTX 1060. Bought some months ago (replaced an MSI GTX 560 Ti), but noticeably before the problems started.
PSU: XFX 750 XXX Edition

Please find attached some of my latest minidumps. Do say if you need any more information. Thank you for your assistance!

Read other answers
RELEVANCY SCORE 84.8

This BSOD occurs when I get to my office in the morning. The computer has gone to sleep overnight and it starts back up okay. I log in, and soon after the blue screen pops up. The computer is on a Windows based network, but I'm not sure this is an issue. Recently I left it logged into an account on just the local computer and when I started it up the next morning it did the same thing.

This is a brand new MSI computer (two weeks old) that I upgraded from Windows 7 Home to Windows 7 Pro 64 bit. I used drivers from the MSI website, which isn't nearly as easy to use as HP's driver site so I might have gotten something wrong. I did NOT use the Live Update tool.

Any help would be appreciated.
Tracy

A:BSOD 0x00000014 after waking up from sleep mode

Hi dranet.

Does it BSOD even the HP officejet is disconnected?

Take the Hitachi Drive Fitness test: 7 Free Hard Drive Testing Software Tools

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If all the tests are free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System R... Read more

Read other 1 answers
RELEVANCY SCORE 84.8

I bought a refurbished lenovo u410 with windows 8 back in september, but in the past week every time it goes into sleep or hibernation mode I get a BSOD with Driver_Power_State_Failure. Any help in identifying the problem would be greatly appreciated!

A:BSOD when waking from sleep/hibernate mode

Update your drivers to the latest, Win8.1 version from the Lenovo website ( Lenovo Support - Drivers & Software (US) )
In particular, update this one (it's at the bottom of the Chipset section - and under the Storage section): Intel Rapid Start Technology Driver for Microsoft Windows 8 (32-bit, 64-bit), Windows 8.1 (32-bit, 64-bit) - IdeaPad U310, U310 Touch, U410, U410 Touch

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
Lenovo HD Disk Driver
http://www.carrona.org/drivers/driver.php?id=LhdX64.sys
FYI - I was unable to find an update for this - so don't worry about it overmuch for now.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Nov 11 15:16:39.326 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111113-26953-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16404.amd64fre.winblue_gdr.130913-2141
System Uptime:0 days 13:06:46.184
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WAR... Read more

Read other 2 answers
RELEVANCY SCORE 84.8

Here is the BSOD error message:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF960002F18F7
BCP3: FFFFF8800AD77EA0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\091312-27159-01.dmp
C:\Users\tmichael\AppData\Local\Temp\WER-694844-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

A zipfile of the logs from SF Diagnostic Tool is uploaded to this thread.

I'm grateful for any help.

A:BSOD often after waking up from sleep mode - new computer

Welcome
All your dumps show win32k.sys as the problem but that's not the realcause.

If you are overclocking any hardware, please stop.

Lets enable driver verifier to rule out buggy drivers.

Verifier puts extreme stress on the drivers, bad ones will cause BSOD. If we change all those drivers we hope for no more BSODs, If you get no BSODs, then its not a driver and we look to hardware.Driver Verifier - Enable and Disable
Information
Driver Verifier runs in the background, "testing" drivers for bugs. If it finds one, a Blue Screen of Death (BSOD) will result; the corresponding dump file will hopefully show the faulty driver.








  
Quote: Originally Posted by Capt.Jack Sparrow


Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior.

Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Read other 9 answers
RELEVANCY SCORE 84.8

I've been trying to catch the various error codes at the blue screen, but haven't been quick enough. In the event viewer I see ID 10 event codes, but from what I read online they are not indicative of a serious problem. The BSODs seem to be associated with windows 7 waking from sleep. I have been researching that all morning, and I believe my system is set up correctly. I use S3 mode as far as I can tell. This is a brand new computer build, and my first time, so I wouldn't be surprised if I'm missing something. I really like the trouble shooting, and especially utilizing the brain power online, so I appreciate any help that can be offered.

I finally captured a stop message.
STOP: 0x000000F4 (0x000000000000003, 0xFFFFFA800B938B30, 0xFFFFFA800B938E10, 0xFFFFF80002F80460)

A:BSOD when waking from sleep mode 0x80041003

Welcome and thank you for choosing SevenForums.

A number of your .dmp files come with bug check code F4, often relates to hard drive issues.

I note you have a SSD.

Code:
Model INTEL SSDSC2CT240A3
Please do the following:







  
Quote: Originally Posted by writhziden



If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.



Norton tends to cause BSOD-s. I would recommend uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials To Test.
Norton Removal Tool
You may install it back if it is not the cause of your BSOD-s.

Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, i... Read more

Read other 9 answers
RELEVANCY SCORE 84.8

New computer for my dad.
ASUS H81-ME mainboard
Pentium G3220 3.0GHz
8GB 1600MHZ DDR3
Win 7 Home Premium 64bit
Install went without a hitch but the computer crashes upon waking from sleep. Not always either, just sporadically. I have already replaced the new motherboard and memory for replacements, also new, but the problem persists. I will upload the memory.dmp and latest mindump files in hope of some help with this issue.
This morning I replaced the old/new PSU with a new/new psu since kernel power is mentioned in the Windows logs. I started sfc before I left his house this morning too and will report any problems found.

Any help would be greatly appreciated.

Edit: SFC came back clean.

A:Random BSOD waking from sleep mode

Hello Squirly,

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 6 answers
RELEVANCY SCORE 84.8

Newly built computer, I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode. Any help with this would be much appreciated! Thanks!

System Specs:
Windows 7
Home Premium
x64 bit
OEM
The entire system is a little under 2 weeks old.

A:BSOD Occasionally after waking up from sleep mode

These crashes were caused by memory corruption probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifer






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can r... Read more

Read other 1 answers
RELEVANCY SCORE 84.8

Hello,

I have been getting these random crashes for a few months now. I usually put my computer to Sleep overnight or when I'm away from the keyboard for a while, but sometimes the computer wakes from sleep in a fresh boot and gives the black-and-white "Windows did not shut down correctly" screen, with the usual options of repair, resuming normal boot, and what have you. Repairing does not seem to work. Resuming booting makes the computer boot normally enough, so this is a nuisance but not tremendously catastrophic. I am mostly wondering if I'm having an incoming hardware failure or something that I should be aware of.

Here are the vitals of my configuration:

OS: Windows 7 Home Premium x64, bought separately
MoBo: ASRock P8P67 Pro3
CPU: Intel Core i5-2500K. I have been running this at 4.0 GHz, but have returned it back to original clock speed (3.3 GHz) to see if that helps.
GPU: MSI GTX 1060. Bought some months ago (replaced an MSI GTX 560 Ti), but noticeably before the problems started.
PSU: XFX 750 XXX Edition

Please find attached some of my latest minidumps. Do say if you need any more information. Thank you for your assistance!

Read other answers
RELEVANCY SCORE 84.8

My computer got a kernel_data_inpage_error BSOD after waking from sleep mode. It's gotten this particular error multiple times, as well as a few others (system_service_exception, interrupt_exception_not_handled, etc.).

I've tried reinstalling Windows and all my drivers and the problems still occur, so I'm not sure what I should do. Any help in diagnosing the problem is much appreciated.

A:Kernel_Data_Inpage_Error BSOD after waking from sleep mode

Hi tobyps.

There is no KERNEL_DATA_INPAGE_ERROR (0x7A) crash dump in the uploaded zip. All I am seeing are INTERRUPT_EXCEPTION_NOT_HANDLED (0x3D) which is a vary rare bugcheck itself.

I think we should pay attention to the 0x7A BSOD at first, because it is somehow related with disc hardware. It is tough to proceed without the crash dump, but there is high probability that the nature of the BSOD resists the system to record it.

Take a camera snap of the 0x7A BSOD screen. The on-screen information will be enough to set a way for us.

Read other 5 answers
RELEVANCY SCORE 84

Processor Intel® Core™ i7-2600 (3.40 Ghz, 8 MB Cache)
Operating System Windows 7 Home Premium 64bit
RAM 8 GB
Graphics card AMD HD6670
2GB dedicated memory
 
I'm having issues with a BSOD that only occurs when waking the computer up from sleep and hibernation mode. The BSODs have been occuring for over a year now, but as they have never been all that problematic i have let them pass. Untill now they have not been consistent, sometimes they occur once every couple of weeks, sometimes once every couple of months. In the last 2-3 weeks however they have begun to become a little more frequent. I still put my computer into sleep mode fairly regulalry, and it wakes without a problem, but in the past couple of weeks i'd say it has awoken to a BSOD around 3 times.
 
When the blue screen occurs, the cause always seems to be intelpmms.sys. I have checked the intel website for an update on this particulalr driver and i seem to have the latest update.
 
My computer is free of viruses and malware, i run a virus scan on a fairly regular basis.
 
I'm not sure what other information i can give you, if you require any further information please ask.
 
When going through the process of locating the dump file,i wasn't able to come across this weeks dumps. So in windbg, i used a dump file from last december. As this is very likely to be the same blue screen (i have not had any other issues with blue screens other than waking from sleep mode) as the one i have r... Read more

A:BSOD after waking from sleep/hibernation mode - intelppm.sys

Hi
 
 
We need to collect some basic info to analyze and find the reason behind the crashes. So please follow the below steps.
  Upload the crash dumps for analysis
First of all make sure to set Windows to write small memory dumps in the event of a crash. 
 
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html
 
After you got two or more BSOD , open C:\Windows\Minidump folder. Copy and  zip the entire contents of that folder to a single file  and upload to any free file hosting site of your choice. You may have to disable UAC to copy them.
 
Example file hosting sites :
 https://www.box.com/
 http://www.mediafire.com/
 http://www.sendspace.com
 
Post the download link to the dumps in next reply.
 
   A Speccy report about your system
 
  Generate a report about your system using Speccy by reading the guide below. Make sure to run the Speccy after running the system about one or more hour. This will give us an indication of current CPU -GPU temperature status.
 
   http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
 Post the web link displayed by Speccy in next reply.
   A Minitoolbox log
 
  Download Minitoolbox from the below link.
 http://www.bleepingcomputer.com/download/minitoolbox/
 
 
  Run the tool and only select the following tick boxes.
 
&... Read more

Read other 44 answers
RELEVANCY SCORE 84

I hope you'll bear with me, I'm rather new at stuff like this.

My computer is a Dell Inspiron N7110 Laptop running Windows 7 Home Premium 64 bit.

This has started in the last couple of months. There were more instances of it happening, but when trying to clean things up, I think I got rid of some older Dump files. It mainly does it when I put my computer into sleep mode or it goes into sleep mode on it's own, other than that it seems to working fine. I did a memory test and some other hardware diagnostics and everything checked out OK, altho when using the Dell diagnostic tool, it couldn't run some tests on the 2 video cards for some reason, I don't know if that's an issue or not.

I tried using the Intel Updater tool, it said I had an older version of the chipset, so I would download and install the newer one, then it would say it installed correctly, then immediately would turn around and say the install failed! I noticed looking online a lot of people had this issue with the Intel Updater.

The most recent thing I have installed is an Epson Workforce 3640 printer, which does kind of coincide timewise with the problem starting, but I don't know if it could be related or not.
I don't know if this is useful or redundant, this is what usually shows up on Blue Screen Viewer.

100615-25053-01.dmp 10/6/2015 3:47:53 PM IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000008 00000000`00000002 00000000`00000001 fffff800`0333d911 ntoskrnl.exe ntoskrn... Read more

Read other answers
RELEVANCY SCORE 84

Hello, hopefully you guys can help me from spending money on new hardware (although I'd love to lol). I've had a BSOD issue for the past 3-4 months. It usually happens when I wake my computer up. Once I get the BSOD, it restarts, usually hangs up before getting to Windows or as Windows is loading, and I have to shut it down again for a minute or so before it will boot to Windows. I have reinstalled Windows multiple times on multiple hard drives. I just bought a SSD. I have a feeling this is a hardware issue and I'm thinking about upgrading to Intel's latest processors but I just want to make sure that I wouldn't be wasting my money in case it is something else besides the motherboard/processor/memory. Thanks for taking the time to help!

A:BSOD Issues When Waking Computer From Sleep Mode

Are you spanning your desktop or cloning them?

I see you have 2 diff resolutions..

Is your E: drive "My Passport" actually internal or is it an external drive?

You have a gazillion drives, can you send a screencap of your disk managment.

Are you using any of these other drives as a readyboost or as the pagefile.sys location?

If windows is trying to read from one of these drives when it wakes up and theyre still asleep or still waking up, you may get errors including BSOD..

Read other 5 answers
RELEVANCY SCORE 84

Hi guys,

After a fresh Windows 7 Professional x64 install on my new Samsung SSD (850 Pro 256GB ATA), I noticed frequent BSODs that happen only after the computer goes to sleep mode; when I wake up the PC (it's a desktop), there's a BSOD and I have to restart it. The issue does not occur in other conditions, no random BSODs while the PC is normally active.

After reboot, I get this message:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF880133091C5
BCP3: FFFFF8801AD56068
BCP4: FFFFF8801AD558C0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010316-13104-01.dmp
C:\Windows\Temp\WER-14804-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Read other answers
RELEVANCY SCORE 84

Hi there,

As it says in the title, my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.

So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.

My computer is Windows 7 64-bit, OEM version from Acer.

Thanks for any help

A:BSOD after waking up from Sleep Mode, freezing when idle.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 3 answers
RELEVANCY SCORE 82.8

I did a clean install of Windows 8.1 recently. Now when my computer wakes up from sleep I receive a DRIVER_IRQ_NOT LESS_OR_EQUAL BSOD related to cmudaxp.sys, which I've discovered is related to my Asus Xonar Essence STX sound card. I am running the Windows 8.1 beta drivers directly from Asus's website, and the drivers were working fine before my clean install. What could be causing this problem now, after everything was fine before?

Specs:

MOBO: MSI Z87-G45
CPU: Intel i7 4770k
RAM: Kingston HyperX Black 8GB 1600Mhz
GPU: Asus GTX680 DirectCuII Top Edition
WIFI: Asus PCE-AC68 Wireless Card

Thanks!

A:BSOD after waking up from sleep mode related to Xonar card

Please couldyou post your dumpfiles according to these instructions here http://www.eightforums.com/bsod-crashes-debugging/10685-blue-screen-death-bsod-posting-instructions.html .
Please use option one and use Grab all.

Read other 3 answers
RELEVANCY SCORE 82.8

Hi! I recently went into sleep mode and when I wake up my computer, BSOD appears. I tried using the
sfc /scannow multiple times. The result is "Windows Resource Protection found corrupt files but was unable to fix some of them. Also, I tried doing a disk check on my SSD, and posted a error log from it. Any suggestions would help a lot!

A:BSOD immediately after waking from sleep mode, error 1000007e

I see this thread is marked as solved.

If you need any further help on this issue, unmark it and follow the Blue Screen of Death (BSOD) Posting Instructions.

Attach the data with your reply post only, dont make another new thread.

Read other 1 answers
RELEVANCY SCORE 82

I had a full factory reset done by a technician in January. A suspected virus was the reason for the reset. Since getting the computer back, whenever I wake it from sleep mode I get the BSOD. The BS says kernel data inpage error. I will include the picture with this post. I have since changed the settings to never sleep.

I know you will want the mini dump files, but the two links I went to this morning were broken. I did manage to go into them last night (my mini dumps) and discovered the culprit is ntoskrnl.exe. I will include a docx copy of the three that happened yesterday while I was trying to fix it myself.

I have run chkdsk, as well as the memory diagnostics tool. All appears fine. I also checked the Microsoft updates, wondering if maybe the tech hadn't installed them all, but they too, appear to be fine.

I do not have a disk, so I cannot redo clean install, and I cannot afford to take it back into a technician. I'm a senior with very limited funds, but I do know my way around a computer (for the most part), so I'm really hoping this can be fixed by me, with your help. Thank you.

A:BSOD when waking from sleep mode - kernal data inpage error

Blue Screen of Death (BSOD) Posting Instructions

See above your post.

Read other 8 answers
RELEVANCY SCORE 82

Hi,

I been having BSOD stop error 0x000000f4 while gaming or when I wake the computer up from sleeping. This only happens once every 2-4 weeks it seems.

Attached are the wintodws nt bsod jcgriff2 and perfmon report.

Thank you.

Computer specs are

windows 7 pro x64 oem
24GB RAM memtest passed
core i7 920 at stock
radeon 5850
corsair 650w psu

A:BSOD during gaming or waking from sleep mode stop error 0x000000f4

Problem Devices:
Code:
Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2 PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&44D0CAE&0&00E5 This device is disabled.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\galloway\Windows_NT6_BSOD_jcgriff2\030312-22152-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0300c000 PsLoadedModuleList = 0xfffff800`03251670
Debug session time: Sat Mar 3 12:16:28.441 2012 (UTC - 7:00)
System Uptime: 0 days 0:41:20.361
Loading Kernel Symbols
...............................................................
................................................................
..............................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 3 answers
RELEVANCY SCORE 82

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 80.8

Hi all,

I have been getting random BSOD when I wake my laptop from sleep, especially when the sleep is done when the laptop is unplugged (ie. running on battery).

I have attached the recent BSOD dmp files in the link below:
https://onedrive.live.com/redir?resi...hint=folder%2c

I appreciate any suggestions on how I can resolve this. Thanks.

A:BSOD while waking laptop from sleep

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.

The drivers that are struckout don't have updates available (AFAIK).
DO NOT delete them, just leave them be.

Beyond this, as there was only 1 memory dump in the upload, I have these 3 suggestions:
1. Get ALL available Windows Updates. It may take several trips to get them all
2. Start with these free hardware diagnostics: Hardware Diagnostics
3. If all of the hardware tests pass, then run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Wed Oct 1 05:05:41.270 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\100114-24875-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.17238.amd64fre.winblue_gdr.1... Read more

Read other 23 answers
RELEVANCY SCORE 80.8

I'm having BSOD most of the times I wake the laptop form sleep mode, it didn't happen back in Vista. Here is the dump:
 
==================================================
Dump File         : 120114-56906-01.dmp
Crash Time        : 12/1/2014 7:45:36 PM
Bug Check String  : KERNEL_DATA_INPAGE_ERROR
Bug Check Code    : 0x0000007a
Parameter 1       : fffff6e0`00b2f620
Parameter 2       : ffffffff`c000003f
Parameter 3       : 00000000`1f022880
Parameter 4       : ffffc001`65ec4000
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153ca0
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.3.9600.17238 (winblue_gdr.140723-2018)
Processor         : x64
Crash Address     : ntoskrnl.exe+153ca0
Stack Address 1   :
Stack Address 2   :
Stack Address 3   :
Computer Name     :
Full Path         : C:\Windows\Minidump\120114-56906-01.dmp
Processors Count  : 2
Major Version ... Read more

A:BSOD when waking laptop from Sleep

The error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A states that the requested page of kernel data from the paging file could not be read into memory. It appears that there are some issues with the hard disk.
Use check disk command for any errors on hard disk -
Warning: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For safety you can back up your data before using the check disk command.
Use the check disk commands as follows:
 1. Click Start. 
 2. In search window type 'cmd' and ENTER. Right click and select 'Run as administrator'.
 3. Type at the command prompt CHKDSK /P and press ENTER to scan the disk.
 4. Then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are any.
NOTE: The root drive has to be C: and the command may schedule a task at the system startup, if it does, then press Y to schedule a task and restart the computer to perform chkdsk.
Once chkdsk completes, boot to the desktop and then check.

BTW what size is your HDD drive? There is a hotfix for similar symptoms in Windows 7 when you have large SATA drive:
http://support.microsoft.com/kb/977178
But please first try CheckDisk.
 
Hope this helps. Let us know the results.

Read other 11 answers
RELEVANCY SCORE 80.8

Hi,

Recently, whenever I wake my laptop up from sleep (from closing the lid and then opening it again), sometimes I get a BSOD.

I think it started when I updated the Intel graphics driver, so I've booted into safe mode, uninstalled and reinstalled the driver, and I still get an issue.

I've attached the debug files, there was a previous BSOD a few months ago that I was getting due to a Nvidia driver issue, but I downgraded to an earlier version and it's stopped it, so I don't think the issue is there.

A:BSOD On Laptop Waking From Sleep

The last dumpfiles all blames your nvdia gpu driver.

Code:
[*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 113, {19, 2, 10de, fe4}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgkrnl.sys ( dxgkrnl!DpiFdoHandleSurpriseRemoval+131 )
The timestamp is nvlddmkm Tue Nov 24 19:15:37 2015
You have a Dell 7737 laptop, Dell advice to use their own drivers from the supportpage http://www.dell.com/support/home/us/...ivers/advanced

It could be that windows update has installed other drivers.
Advice also update all your other drivers to the latest version from the supportpage.

Read other 0 answers
RELEVANCY SCORE 80.8

Hi, i'm new to these forums, so have some paitence with me.

I've recently installed windows 7 ultimate x 64 on my laptop:

HP Pavilion dv6700.

No hardware changes,just stock.

It almost always crashes (at a rate of 8/10) after I wake my laptop from sleep.

I hope my dump files will help.

A:BSOD after waking my laptop from sleep

Your BSODs are caused by HotSpot Shield or any other program made by AnchorFree Inc
Please remove any of these programs

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 1097, 4440005, fffffa800213b370}

Unable to load image \SystemRoot\system32\DRIVERS\HssDrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for HssDrv.sys
*** ERROR: Module load completed but symbols could not be loaded for HssDrv.sys
GetPointerFromAddress: unable to read from fffff80002f110e8
Probably caused by : HssDrv.sys ( HssDrv+2bac )
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001097, (reserved)
Arg3: 0000000004440005, Memory contents of the pool block
Arg4: fffffa800213b370, Address of the block of pool being deallocated

Debugging Details:
------------------
POOL_ADDRESS: fffffa800213b370

FREED_POOL_TAG: aPmI

BUGCHECK_STR: 0xc2_7_aPmI

CUSTOMER_CRASH_... Read more

Read other 4 answers
RELEVANCY SCORE 80.8

Hey,

So i've recently been getting a BSOD in Windows 7 after waking my PC from Sleep.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: c2
BCP1: 00000007
BCP2: 0000109B
BCP3: 085E0009
BCP4: 850F6730
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

012212-19968-01.zip

Theres a link to the DMP File.

Any help is appreciated

Thanks

A:BSOD While waking Laptop from Sleep.

  
Quote: Originally Posted by LegacyJuice


Hey,

So i've recently been getting a BSOD in Windows 7 after waking my PC from Sleep.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: c2
BCP1: 00000007
BCP2: 0000109B
BCP3: 085E0009
BCP4: 850F6730
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

012212-19968-01.zip

Theres a link to the DMP File.

Any help is appreciated

Thanks


Easy, your avast which is often at least a contributing cause of BSOD'S . Please remove and replace your Avast with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 80.8

Hello!


Just got a random BSOD when i was waking up my laptop (opening it basically).
This is the first time it happened... but i don't like blue screens
so, could someone take a look as to what could have caused it?

Thank you!


PS: i created another post recently in the crash forum section, and the
two posts are unrelated (not the same computer)!

A:BSOD when waking up laptop from sleep

Welcome
It is very difficult to diagnose a blue screen based upon one report. Your report points to a driver, which is often caused by a bad hard drive. Why not take the hard drive test and then report any new BSODS that you recieve. It would be unpleasant for you to have to take a multitiude of tests while we guess.
Test Hard Drive
Harddrive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

Read other 9 answers
RELEVANCY SCORE 80

LAPTOP:
- HP DV6-6c15nr
- Windows 7 64-Bit
- Intel Core i5 2450M(2.50GHz)
- 6GB Memory 500GB HDD
- Intel HD Graphics 3000
Hey guys. i need help with a problem. My laptop wakes up seconds after it goes to sleep.. The battery ends up dying if i dont connect to charger. i realized this problem started occurring after i experienced my first BSOD on this laptop on October 4th. i remember it said something about ntkernal or something like that. Unfortunely, i do not have the bsod dumpfile as it got deleted from cleaning some files with iobit. But, i did take a screenshot of the bsod notification. See here
Also, I looked in the event log and it said something about some bugcheck: eventviewer files here
 

0x0000009f (0x0000000000000003, 0xfffffa8006237a10, 0xfffff80000b9c3d8, 0xfffffa8008b67ca0).

i only copied 20 files after from when it happened, so if you need more info i can provide.
some things i tried already:
 

powercfg -lastwake

it just said type:fixed feature power button.
 

powercfg -devicequery wake_armed

it said mouse and keyboard, so i removed the wireless usb dongle for my mouse. still laptop wakes up after sleep.
allow wake timers in advanced power options is disabled
please help me, this is really annoying.

A:BSOD, Laptop keeps waking up seconds after going to sleep.

Hi
 
0x09F blue screen means a driver is in inconsistent power state when a power state transition happens. Unfortunately, there is nothing we can do without the actual crash dump files. Please force the system to blue screen by entering in to standby or hibernation. Once you got at lease two dumps, zip and attach with the reply.

Read other 6 answers
RELEVANCY SCORE 80

Hello Everyone:

I have seen the many posts about the BSOD. So I went to download the Windows Debugging Tools but each time it keeps complaining about missing files. This means I have no dumpcheck utility.

The problem occurs when I reopen my lid to wake up my laptop from sleep or hibernation. Sometimes it works fine and then other times it reboots and then after my login loads the message comes up about 'windows has recovered from an unexpected shutdown'. I went to Device Manager and right click to upgrade the drivers but Windows said they were already up-to-date. I also ensured that in Windows Update, I checked the optional downloads too. However, the problem still occurred.

I am hoping that the forum members will be able to assist using the crash files that I have attached. My system specs are on my profile page. Thanks.

Regards
hikarimay10

A:BSOD when laptop waking from sleep or hibernation

Update your NIC driver:
Broadcom NetLink (TM) Gigabit Ethernet
fffff880`07278000 fffff880`072d9000 k57nd60a Sat May 15 14:51:06 2010 (4BEE98BA)

Also check for new version of these drivers:
Mobile Intel(R) 4 Series Express Chipset Family
fffff880`0742b000 fffff880`07b32400 igdkmd64 Wed Sep 02 20:54:15 2009 (4A9EBF57)

Intel(R) ICH9M-E/M SATA AHCI Controller
fffff880`01271000 fffff880`0147b000 iaStor Tue Apr 13 18:44:16 2010 (4BC49F60)

Name [00000011] Atheros AR5B97 Wireless Network Adapter
fffff880`06ee1000 fffff880`07107000 athrx Fri May 07 02:00:58 2010 (4BE3583A)

Uninstall the Following programs:
Daemon Tools, make sure you get rid of the sptd.sys driver

Read other 9 answers
RELEVANCY SCORE 80

Hi guys,

I have a Lenovo Yoga since 1 and half years now. All of a sudden I am getting a BSOD when waking the laptop from sleep.

Error is " PAGE_FAULT_IN_NONPAGE (rtwlan.sys)"

Am attaching the zip file as instructed.

Now the error has changed to 'SYSTEM_THREAD_EXCEPTION_NOT_HANDLED'
Please help.

Regards,

RAJIV-20-04-2015__92346_27.zip

A:BSOD when waking laptop from sleep, PAGE_FAULT_IN_NONPAGE

Manged to solve this on my own.

Had a wireless driver which was the culprit. Updated from the Lenovo website. Everything ok now.

Thanks guys.

Read other 3 answers