Over 1 million tech questions and answers.

V110-15ISK HDMI issue

Q: V110-15ISK HDMI issue

Hello everyone,I'm in desperate need for some help for this issue with my almost new Ideapad (model as in object). After the automatic Windows 10 1709 Fall Creators Update the laptop started to have problems in recognizing my Panasonic Hd Ready TV via HDMI (wich worked perfectly just before that). No error messages of any sort, it's just like the cable isn't plugged in (Win+P or other combos not working). I thought it could be related with video driver problems, so I ran the Lenovo System Update, which actually solved the problem, but just for a few days. Then it suddenly stopped working again (no other updates or software installation meanwhile). As the drivers as up to date, I obviously can't do any further upgrades. I tried the static discharge methot as well (the battery is built in, so I just kept the power button pressed for 30 seconds with the unit turning on and off repeatedly), but it didn't work for me (maybe I lost something in the process?).I would really be glad for any idea given, as I bought the laptop something like three months ago and, even if i format it (wich won't be a big issue), the Windows update will be reinstalled so the problem will probably show up again. Thanks in advance,Riccardo

Read other answers
RELEVANCY SCORE 200
Preferred Solution: V110-15ISK HDMI issue

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 70.8

Hi all, I have just brought this new notebook, and I have a problem with that. I cannot connect my laptop with an HDMI cable to my smart TV. The TV doesn't recognizes the laptop, I have tried with the win+P combination, but that is not where the issue is. Actually it is like the laptop doesn't even supports the HDMI, which would be nonsense since the device does have a HDMI plug. I have tried to download and install some softwers, none of them seemed to be helpfull.Can somebody help me please? Thanks in advance! 

Read other answers
RELEVANCY SCORE 70.8

Hi all, I just bought this laptop and installed win10 x64. I wanted to connect with Dell ST242OL and I bought hdmi to hdmi.I tried to install all drivers both for intel hd graphic and AMD radeon cards but i couldnt connect my monitor. Its like its not sending signal to monitor at all. Does anyone now what should I do. Thanks in advance.

Read other answers
RELEVANCY SCORE 68

Hello,Is it possible to buy or to be paid back for PC Lenovo ? Regards Simon

Read other answers
RELEVANCY SCORE 67.2

Does the lenovo v110-15isk have a m.2 ssd slot?Specs:i3 6006ur5 m430 2gb gddr34gb ram ddr4 2133mhz1tb hdd15.6 inch display 1366x768 resolution

Read other answers
RELEVANCY SCORE 66.4

As the title says V110-15ISK keyboard/trackpad not working - these are brand new out of the box (i've had 3 out or 10 so far do this) so with no OS or bios modifications, any ideas I've tried holding power button for 15seconds as in this link for an unrelated lenovo device (figured it was worth a shot)https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/flex-15-keyboard-and-touchpad-suddenly-... In fact one of the 3 that have decided to do this one has decided to do it after being able to use keyboard / trackpad to change bios setting then pxe boot the install windows 7 64bit in install drivers edit: oh this 'feature' also appears to kill LAN capabilities although external USB keyboard works... (O_e)edit2: also takes out wifiedit3: set bios back to default with no success bios version on this particular laptop I'm working onBIOS: 1KCN29WWEC: 1KEC01WW any ideas any one? (re-posted since original got deleted)-ash

Read other answers
RELEVANCY SCORE 66.4

Hi folks, I am asking you information to improve my ram. I read on the forum, that my notebook has 2 socket: V110-15ISK: 16GB max / 2133MHz DDR4, dual-channel capable,4GB memory soldered to systemboard, one DDR4 SO-DIMM socketSo, to not opet before my notebook, Do I have available another socker for upgrading the ram?Regards,Emanuele

A:Ram upgrade for v110 15isk 80lt000nix

Hi gabriel90ita,
 
Welcome to the Community Forums.
 
As per product specifications:
V110-15ISK: 16GB max / 2133MHz DDR4, dual-channel capable,
4GB memory soldered to systemboard, one DDR4 SO-DIMM socket
 
There would only be one available socket for upgrade (up to 16GB max) similar to crucial's scanner here.
The other 4GB is soldered part of the systemboard as shown here in page 49 hardware manual.
 
Hope this helps answer your query.
 
Regards

Read other 2 answers
RELEVANCY SCORE 66.4

Hello, i just wanna know if it is possible to upgrade the Lenovo v110-15isk cpu and gpu. 

A:Lenovo V110-15isk CPU and GPU upgrade

In all modern laptops the CPU and GPU are soldered to the motherboard. It's called BGA socket. And to upgrade them you have to replace the whole motherboard with new CPU and GPU soldered to it.

Read other 1 answers
RELEVANCY SCORE 66

I have (or had) a new, working lenovo laptop. Everyting was normal but after downloading updates from its official  red lenovo app that was loaded in the computer, it said it needed to restart, black cmd appeared, it counted down from 5 to 0 and then nothing but a working fan, orange led light that shows the computer is charging and caps lock light. I remember before the update i closed num lock's light but now i can't open it. So I can say keyboard also doesn't work. I read some solutions by holding the power button for some time. Non of them worked, it just powers on and powers off. There is no light in the screen. I am confused and sad. I have an assingment 2 weeks later and have a brick in my hands that can cool itself. I mean how can a company wreck its own computer by updates? Please tell me it can be repaired and warranty covers it.

Read other answers
RELEVANCY SCORE 66

Hi.First time I tried to connect my new LG TV to my V110-15ISK, everything went fine. However, after that it no longer manages to connect. Is anybody here able to help me, please? Halstein.

Read other answers
RELEVANCY SCORE 66

Hello.  Got this laptop this past Christmas, unfortunately has never worked very well.  Since I bought it, it's had this problem where every time I close the laptop and reopen it, the task bar disappears and the trackpad is unuseable.  I have to manually restart it to get it to work again.  I disabled sleep mode and still this problem would occur.  Then suddenly the trackpad stopped working altogether.  I have to plug in a USB mouse to use this laptop now.  I updated all drivers (including trackpad) and still I cannot use the trackpad.  Windows 10 is also fully updated.  I did not change anything in the control panel so am not sure why it suddenly stopped working.  I am attaching a picture I took showing the problem.  This is after opening up the laptop, you can see the taskbar has disappeared and screen is incorrect resolution.Honestly, this laptop is very disappointing and I'm frustrated that I got it.  I have a newborn at home so spending time on this is really annoying/difficult.  I hope very much that there is an easy fix here.  Please help.  ThanksKC


























IMG_0848.JPG ?1612 KB

Read other answers
RELEVANCY SCORE 66

Hello Everyone, I was at my laptop like always when suddenly it turned off. NOTE: the laptop was charging when it turned off. after that no sings of life, no charging led indicator, no nothing, it is now a 500$ anti stress power button machine, tried evey single method i can find, i even opened the cover and removed the battery, pressed the button, removed ram, removed cmos battery for 30 seconds. Any other suggestions? maybe this could help: THe laptop was connected at a extension cord when this happened and there was only a monitor and my laptop.

Read other answers
RELEVANCY SCORE 66

Hi,we have several v110 devices that have the same issue, when we close the device and after a while we open it again the device not comming up again, it keeps turning on the Lenovo screen. When i push the start button en hold it will stop but when i start the devices again the problem remains.I get in the device when i use the reset button on the right side with a small pin, then choosing recovery, and exit out of the recovery. Then it startup to windows. But if i close the device end reopen the issue is exactly as before. Any idea why this V110 devices facing this issue? Best regards,Benny

Read other answers
RELEVANCY SCORE 66

I'm connecting the laptop HDMI port to the monitor DP port using a HDMI<--> DP cable.  I've tried the following, but nothing seems to help1. installed latest drivers2. installed latest firmware3. tested connecting to another monitor using HDMI to HDMI cable, and it works4. Tested the DP monitor using other laptops, and it works fine. 5. Used F10 to extend screen6. Used a new HDMI <--> DP cable and doesn't work Any thoughts what i can do differently?

Read other answers
RELEVANCY SCORE 66

Hi,I want to upgrade my laptop with an ssd and I would need a caddy for the hdd(as it seems the boot drive must be in the internal sata port) and i got a compatible ssd(that is easy) and the problem is picking a caddy,as if i pick by myself and not from the service i escape with atleast 2x moneySo what is the size for my laptop?

Read other answers
RELEVANCY SCORE 66

I have a Lenovo G510 i7, and now I have bought a Lenovo V110-15isk i3 for my daughter. The notebbok has no DVD/CD unit, so I was planning to make a Bootable USB with Windows 8.1. I used the free program Rufus and got it. But then when I change the BIOS Boot section to state boot from USB and UEFI, the system si not able to start the instaltion. Any ideas.Thank you.Bets RegardsJose

Read other answers
RELEVANCY SCORE 66

I'm having to replace the keyboard on a V110-15ISK laptop . However the keyboard and its aluminium cover plate have no screws that can be removed, but seem to be 'welded' to the front cover of the laptop,  using pre-moulded plastic pillars. Has anyone had to replace one of these keyboards or has any suggestions ?? thanks 

Read other answers
RELEVANCY SCORE 66

Salve a tutti.Ho un lenovo v110-15isk che al primo avvio mi si ferma sempre sulla schermata "lenovo" senza dare segni di vita, successivamente spegnendolo forzatamente e riaccendendolo nuovamente parte senza nessun errore, ho giÓ eseguito un aggiornamento della bios all'ultima versione ma nulla Ŕ cambiato, potete darmi qualche istruzione su come poter risolvere questo problema?

Read other answers
RELEVANCY SCORE 66

I have a Lenovo G510 i7, and now I have bought a Lenovo V110-15isk i3 for my daughter. The notebbok has no DVD/CD unit, so I was planning to make a Bootable USB with Windows 8.1. I used the free program Rufus and got it. But then when I change the BIOS Boot section to state boot from USB and UEFI, the system si not able to start the instaltion. Any ideas.Thank you.Bets RegardsJose

Read other answers
RELEVANCY SCORE 66

I bought a Lenovo V110 15ISK 80TL Notebook in June 2018 and for the last 5 days, it shows me only hibernating in the middle of the screen and nothing else. No start button or anything is displayed on the screen. I can force switch off the notebook by pressing the power button but when I turn on I get the same screen "Hibernating". Kindly help me in bringing my notebook to its normal working mode.  Thanks in advance!Fred

Read other answers
RELEVANCY SCORE 65.2

Hello,I've just updated BIOS using BIOS Update from your support page (https://pcsupport.lenovo.com/pl/pl/products/laptops-and-netbooks/lenovo-v-series-laptops/v110-15isk/...). After that instead of loading Windows I get boot menu. In boot menu after selecting HDD I get black screen and after few seconds boot menu appears again.Is there anything that I could do to make this work normally???

Read other answers
RELEVANCY SCORE 65.2

I have a Lenovo V110-15ISK where the power button does not appear to work, but if I remove and reinsert the power cable the laptop will open up the Novo Button Menu and I can boot to the hard drive from there - from that point the laptop will work fine.  Pressing the Novo button itself will not turn the laptop on. This is a work laptop so I have other laptops I can get spares from, so I've replaced the power button component, the cable, and the motherboard entirely, but the problem still persists.  Pressing the physical power button component while I had the case opened up also did not work, so I don't think it is anything to so with the plastic power button not connecting to the component. I've noticed that these Lenovos will not power on if they are sat on another Lenovo laptop (no idea why that is) so I'm wondering if whatever causes that effect could be affecting this one too, even though it is not stacked on another laptop. Any suggestions or advice gratefully received.

Read other answers
RELEVANCY SCORE 65.2

I just purchased a Lenovo Ideapad V110-15ISK with the intention of replacing the 500 gb hdd with a 480 gb ssd.  I used the Aoemei cloning software but it says the ssd is too small?  I haven't installed anything on the 500 gb hdd, I'm just going with it out of the box, so I thought cloneing to something 20 gb smaller shouldn't be an issue.  I made the Lenovo partician drive that's 24 gb smaller, to about 3 gb, and it cloned fine, but when I installed it back into the laptop, on start up I get a windows 10 boot error 0xc0000225.  I went ahead and made a boot usb and it boots, but then it wants me to install window 10 anew? I don't know what to do.  I love the laptop, I just want it running off of an ssd, and it should be simple, but I spent most of my Sunday on this and the anxiety is getting to me. I posted this a few min ago but the thread was gone a few min later, if this is improper formatting, please let me know and I'll make the changes, otherwise I'm just trying to get some help here.

Read other answers
RELEVANCY SCORE 65.2

I updated my laptop BIOS yesterday, downloading the file from Lenovo's website. The update went well, and the laptop restarted correctly after it. Then I shut down the lapotop after using it. Today, when I switched it on, I had just the image with the write LENOVO word on it, and the circle below it running as usual. It is maybe one hour that there is this screen on. any tips? 

Read other answers
RELEVANCY SCORE 64.4

Hello and good day, I have successfully created the free Win10PROx64 recovery media. Unfortunately I am getting the error below at the very beginning of the recovery procedure. Any help would be greatly appreciated. Thanks,Massimiliano 

Read other answers
RELEVANCY SCORE 64.4

Recently bought v110 15isk 80tl.Right after installing Windows 7 downloaded fresh BIOS (1KCN37WW) and drivers from official site.After successfully updating BIOS the system ceased loading at "loading windows" screen.Safe mode loading stops after loading "\windows\system32\drivers\classpnp.sys"Attempts to reinstall win7 stop at "(C) Microsof Corporation" with runner screen.Downgrading BIOS to versions 28,32,33,35 didn't bring any results.It does successfully load win8pe x64 though, both in legacy support and uefi options in bios.How do I fix this problem?   

Read other answers
RELEVANCY SCORE 64.4

I have done what is suggested on these pages:
 

Checked the devise driver
Checked settings
Downloaded driver for EasyCam from site for my laptop
Added an extra key to the register EnableFrameServerMode =0x0

Nothing works.
 
But starting Lenovo settings, it asked me to update it. Twice I've done that and it asks again to download updates.
 
What gives? 
 
 
Mod's Edit:  this post was moved to its own thread.
 
 

Read other answers
RELEVANCY SCORE 64.4

I have done what is suggested on these pages:
 

Checked the devise driver
Checked settings
Downloaded driver for EasyCam from site for my laptop
Added an extra key to the register EnableFrameServerMode =0x0

Nothing works.
 
But starting Lenovo settings, it asked me to update it. Twice I've done that and it asks again to download updates.
 
What gives? 
 
 
Mod's Edit:  this post was moved to its own thread.
 
 

Read other answers
RELEVANCY SCORE 63.6

Had this issue, found a resolution so sharing it here, hopefully it may help someone searching here for the same issueWindows 7 64bit OS Driver install kept timing out - did a registry edit to extend the timeout to 1800 - driver installed fine although it took a while offsite link:https://kb.stonegroup.co.uk/how-to-fix-realtek-audio-driver-wont-install-error-code-0x000005b4-displ...

Read other answers
RELEVANCY SCORE 63.2

Hi guys, I enjoy using my v110-15isk laptop, but have some video card problems. I tried different ways but cant solve. I hope there are some suggestions here..  System: Lenovo v100-15ISK 80TL, Intel HD Graphics 520 (Onboard), AMD Radeon R5 M430Symthoms: Program crash when Autocad and Google Earth start. OS: I have dual boot on my laptop: Windows 10x64Bit V.1709 (Fall Creators Update) and Windows 7x64Bit.Both windows are updated but they have same problem. Additional info:1-When i set AMD disabled in BIOS, programs work normally but then system is in low video capability mode of course.2-When both video card are installed and i set Autocad on power saving mode in AMD settings then Autocad works but so slow. GoogleEarth does not start (in openGL mode) or start (in directX mode) without navigating world frame.3-I have tried different driver versions but no difference.4-I have tested hardware with Lenovo Diagnostics. It says others are OK but Intel HD520 test failed on "mathematichal operations test" (Program crashs and close). I think main problem is driver conflicts. But how will i solve it?

Read other answers
RELEVANCY SCORE 62.4

My laptop is pending on boot menu and whatever I choose among booting choices the same menu is opened again , the problem began after a BIOS update was suggested by the computer itself . 

Read other answers
RELEVANCY SCORE 62.4

```[[email protected] ~]$ inxi -FxSystem:    Host: master-pc Kernel: 4.12.9-1-MANJARO x86_64 (64 bit gcc: 7.1.1) Desktop: i3 4.13           Distro: Manjaro LinuxMachine:   Device: laptop System: LENOVO product: 80TL v: Lenovo V110-15ISK           Mobo: LENOVO model: Lenovo V110-15ISK v: NO DPK UEFI: LENOVO v: 1KCN28WW date: 11/15/2016Battery    BAT0: charge: 31.7 Wh 99.6% condition: 31.8/32.0 Wh (99%) model: LGC L15L4A02 status: N/ACPU:       Dual core Intel Core i3-6006U (Skylake rev.3) (-HT-MCP-) cache: 3072 KB           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7970           clock speeds: max: 2000 MHz 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHzGraphics:  Card-1: Intel HD Graphics 520 bus-ID: 00:02.0           Card-2: Advanced Micro Devices [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430]           bus-ID: 01:00.0           Display Server: x11 (X.Org 1.19.3) driver: intel Resolution: [email protected]           OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Sky... Read more

Read other answers
RELEVANCY SCORE 62.4

```[[email protected] ~]$ inxi -FxSystem:    Host: master-pc Kernel: 4.12.9-1-MANJARO x86_64 (64 bit gcc: 7.1.1) Desktop: i3 4.13           Distro: Manjaro LinuxMachine:   Device: laptop System: LENOVO product: 80TL v: Lenovo V110-15ISK           Mobo: LENOVO model: Lenovo V110-15ISK v: NO DPK UEFI: LENOVO v: 1KCN28WW date: 11/15/2016Battery    BAT0: charge: 31.7 Wh 99.6% condition: 31.8/32.0 Wh (99%) model: LGC L15L4A02 status: N/ACPU:       Dual core Intel Core i3-6006U (Skylake rev.3) (-HT-MCP-) cache: 3072 KB           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7970           clock speeds: max: 2000 MHz 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHzGraphics:  Card-1: Intel HD Graphics 520 bus-ID: 00:02.0           Card-2: Advanced Micro Devices [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430]           bus-ID: 01:00.0           Display Server: x11 (X.Org 1.19.3) driver: intel Resolution: [email protected]           OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Sky... Read more

Read other answers
RELEVANCY SCORE 61.2

So ive encountered a recuring problem with my V110 laptop. The HDMI port on the computer is sometimes not working. Usually it takes a couple of hours each time to get it working again but im getting annoyed that this is a requrring problem. (general things ive done is make sure the HDMI ports on tv works, changed hdmi cable, changed computer ect to verify its a problem with the V110)Generally the HDMI port stops working after either windows updates, or software installs, however this time it did not work to roll back any updates or uninstall any programs. Ive disabeled and re-enabled graphics drivers, updated graphics drivers, rolled back a windows sequrity update that came into play 13th/14th of sep. 2017.Nothing shows up under display adapter in device manager, and ive tried many of the suggestion fixes on different forum posts to no solution.I'm fresh out of ideas. Anyone have any suggestions before i just reinstall windows in hope that no updates will screw over the HDMI port?

Read other answers
RELEVANCY SCORE 58.4

The last time I updated the BIOS on my Lenovo V110-15ISK I got this instruction that I didn't understand (5. Please load default in BIOS setup menu before and after executing this program.) It took me a while to figure it out but when I finally did I updated the BIOS & had no issues I'm posting this info to make it easier for others to do the same  Follow the instructions to enter the BIOS settings from Windows 10 1) Click all setting?Update&Security?Recover2)Click Restart now3)Click troubleshoot4)Click Advanced options5)Select UEFI firmware settingsThe screen will fade to black & enter the BIOS Setup Utility6)Use the Arrow?Keys to select the EXIT menu7)Select Load Setup Default & Click Enter?Select YES & Click Enter8)Select Exit & Save Changes & Click Enter?Select YES & Click EnterYour PC will now restart & you can begin the BIOS updateRemember to follow these steps before & after the update  Follow the instructions to enter the BIOS settings from the power on screen 1)Restart the system or shut down the PC completely,  the screen will dim off, but it will light up again 2)As soon as you see the ?Lenovo? logo Press F2 (Fn+F2) key The screen will now enter the BIOS Setup Utility3)Use the Arrow?Keys to select the EXIT menu4)Select Load Setup Default & Click Enter?Select YES & Click Enter5)Select Exit & Save Changes & Click Enter?Sele... Read more

Read other answers
RELEVANCY SCORE 58.4

The last time I updated the BIOS on my Lenovo V110-15ISK I got this instruction that I didn't understand (5. Please load default in BIOS setup menu before and after executing this program.) It took me a while to figure it out but when I finally did I updated the BIOS & had no issues I'm posting this info to make it easier for others to do the same  Follow the instructions to enter the BIOS settings from Windows 10 1) Click all setting?Update&Security?Recover2)Click Restart now3)Click troubleshoot4)Click Advanced options5)Select UEFI firmware settingsThe screen will fade to black & enter the BIOS Setup Utility6)Use the Arrow?Keys to select the EXIT menu7)Select Load Setup Default & Click Enter?Select YES & Click Enter8)Select Exit & Save Changes & Click Enter?Select YES & Click EnterYour PC will now restart & you can begin the BIOS updateRemember to follow these steps before & after the update  Follow the instructions to enter the BIOS settings from the power on screen 1)Restart the system or shut down the PC completely,  the screen will dim off, but it will light up again 2)As soon as you see the ?Lenovo? logo Press F2 (Fn+F2) key The screen will now enter the BIOS Setup Utility3)Use the Arrow?Keys to select the EXIT menu4)Select Load Setup Default & Click Enter?Select YES & Click Enter5)Select Exit & Save Changes & Click Enter?Sele... Read more

Read other answers
RELEVANCY SCORE 53.2

Hello Everyone, I have been having this problem from a long time now and just ignored it for quite long. When I connect my laptop with my Samsung TV via HDMI only video can be seen but no audio. Audio output is still through Laptops speaker. i have tried updating drivers, removing drivers for both Intel and AMD.Checked the Playback devices and enabled the SHOW DISABLED DEVICES.Tried Uninstalling and Updating Intel VGA drivers.Uninstalled and Installed AMD drivers.Uninstalled and Installed via Device manager.Checked the HDMI Cable, its working fine with my other laptop.  Awaiting solutions. Thanks.

Read other answers
RELEVANCY SCORE 53.2

My lenovo V310 have problem with HDMI sound output. Video is fine. The cable and TV work fine with another laptop. I tried to update Intel display audio driver and other sound driver. But the problem is not solved. Whenever I check the playback devices, there is one and only one speakers device in the list (no hidden devices and no disable devices). Please advise.

Read other answers
RELEVANCY SCORE 53.2

Hello, i wanted to buy a new monitor with 1080p 144hz or 120hz , but i can't find anywhare info about HDMI version. Does it support such update frequency? 

Read other answers
RELEVANCY SCORE 52.8

The OS is Windows 10. When I plug the hdmi cable, the image works fine, but SOMETIMES the audio comes only from the computer speakers. The tv is not listed in the playback devices, even though the disabled and disconnected devices are ticked to be shown. A restart appears to solve this temporarily. I've been trying to find a pattern (guessing it was some kind of interaction with the headphones jack, or maybe having the tv off at the time of plugging the hdmi in, etc), but I've failed so far. It looks totally random to me. I've also updated the drivers, etc Any suggestions? Thank you

Read other answers
RELEVANCY SCORE 52.8

Hello! I'd like to upgrade to a 120-144hz monitor and my question is what HDMI version does IdeaPad 700-15ISK has?Is it supporting up to 120hz? I have been researching but has not found a good source of information yet. Thank you for your help! Thomas

Read other answers
RELEVANCY SCORE 52.8

Hello everyone, I purchased a Lenovo Ideapd 110-15ISK laptop about a week back. I am trying to connect it to my Samsung TV for external display using HDMI cable without success. Hot keys are not at all working after connecting the cable and I am therefore not able to give the command. Win+P command is also not helping. I have even tried lowering the screen resolution to 1024x768 but no relief.Please help!

Read other answers