Over 1 million tech questions and answers.

Belkin PCI Card problems

Q: Belkin PCI Card problems

I have the 802.11g desktop card which I previously ran on XP. Just got Vista and downloaded new drivers etc ready to install it, but it won't come up on device manager after many attempts. Any ideas?

Thanks in advance.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Belkin PCI Card problems

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 59.6

Hey there,
I'm wondering if somebody can help me. I've recently aquired a wireless router for my broadband from BT. I can get my desktop up and running on the wireless network with the usb adaptor but my laptop will not connect with the wireless card. When I set up the connection to auto detect IP address and DNS the IP address 169.254.96.11 keeps appearing. I don't know where this comes from because the router address is 192.168.1.1. Even when I manually confirgure the settings it still wont connect. When i try to repair the connection there's a problem flushing the arp cache. The only other thing i can think of is the network key may not be entered in the right place. Its an ascii key and I've put it in the passphrase box. Any help on the issue would be greatly welcomed as I'm starting to lose it with this problem.
Thanks,
hapless.
 

A:Belkin wireless card problems

to setup the wireless, the instructions usually say
hardwire the the system to the router first to setup the configuration.
The 169.254.*.* tells you that DHCP is not enabled or configured correctly.
Typical config is
set a non-default SSID
let it broadcast
for the time being, leave WPA and WEP off
enable DHCP for both the IP and DNS addresses​In the wired mode, the new system should be connecting correctly and
ipconfig /all should have a 192.168... number
In the wireless mode, you should SEE your SSID and be able to connect.

Now go back to the router and set WPA or WEP on and set your keys.
 

Read other 2 answers
RELEVANCY SCORE 59.6

Hi, hope you can help a new guy here! I am running win xp home with sky broadband. until my little lad broke it i had a usb dongle which worked fine. to free up my only two usb ports i saw a belkin f5d7011 wifi card so bought that.

I have installed it but it won't pick up any wireless networks. Can anyone please help? thanks
 

A:BELKIN Wifi card problems

Read other 9 answers
RELEVANCY SCORE 58.8

I recentely had to fix my little brother's computer and got it all done, but I didn't have the disk for the Belkin Wireless G Desktop card; My little brother had scratched that up and was no longer readable. I remember that I, once before, had to download the drivers online to get them installed, but cannot find them now.

I was wondering if anyone here could help me with this problem. I have the same card in use on my PC and it is using the BLKWGD.sys file(version 4.1.2.56).

Would there be any way for me to transfer that to his computer somehow, such as burning it to a CD?
 

A:Belkin Wireless G Desktop Card problems

Locate your drivers here:
http://www.belkin.com/support/browse/?lid=en
 

Read other 13 answers
RELEVANCY SCORE 57.6

Good morning.
Could anyone throw any light on the reason behind the following behaviour.

I have just rebuilt a desktop using a Gigabyte GA-7zxe motherboard and an Athlon XP1800+ that I had spare. The motherboard has the latest drivers from Gigabyte installed. The O/S is Windows XP (SP2) installed and there are no appearent problems with it. Apart from Microsoft Word and F-Secure anti virus there are no programmes installed.

A couple of days ago I put a USB 2.0 pen drive in the USB and apart from being informed the motherboard did not support USB 2.0 and the transfer speed would be at the lower rate there was no problems. Suddenly the computer resarted and went through the POST (no problems) to the page where the account you want to access is displayed. I selected the account I wanted and the system flicked onto the Windows page and then restarted again. This happened repeatedly until I removed the pen drive and evrything was again sweetness and light.

Yesterday I installed a Belkin wireless card. The installation went fine and the card was up and running and doing a great job. I turned the PC off and when I went back to it exactly the same thing happened as the USB. Removing the Belkin card cured the problem.

I have tried the card in different PCI slots with the same result, i.e and can install it fine and works until it is rebotted or switched off. I have also tried putting 'older' PCI parts in the PCI slots, e.g. a typical V92 modem and a Promise 100TX Ultra c... Read more

A:Problems with Motherbaord, PCI and USB (Gigabyte GA-7zxe & Belkin Wireless Card

Read other 6 answers
RELEVANCY SCORE 46

I recently formatted my computer and am in the process of getting it working again. The final problem that I am having is that XP does not see my wireless card. It is not listed in the network adapters section and there is no section for "other" hardware. The wireless card is a Belkin Wireless G Plus Desktop Card, F5D7001 Ver. 2001UK. Any help would be much appreciated.
 

A:Belkin wireless card is not seen by XP

Read other 8 answers
RELEVANCY SCORE 46

I have a Belkin USB card p/n F5U220 PCI. It has 5 ports and only 2 of them work. What can I do to get the others working? Thank you in advance.
 

Read other answers
RELEVANCY SCORE 46

Have been having connection problems with a machine with a belkin wireless g network card ,so decided to update the drivers and that solved the problem....except now though a dialog box stating that "the network key should be between 6 and 63 characters" stays on the desk top and will not close.

I am using WPA - PSK and it is between 6 and 63 characters.

Has anyone come across this or a similar problem before cause it's a new one on me.

The machine has a celeron cpu, 1gb ram running xp .

Many thanx.
 

A:Belkin wireless card

Id just check that you have the latest XP updates for WPA in windows. Sometimes not having them can cause trouble.

As far as I remember the wrong ones arent flexible about the length of a WPA key, whereas the newer ones are.
 

Read other 1 answers
RELEVANCY SCORE 46

I have a 2002 Sotec laptop, with no built in wifi. I have a belkin 802.11b network interface bus card wireless adapter (product number F5D6020) which I got to work with my familys netgear wireless router by setting it to WEP. That made the other computers in the house unable to pick up the signal, so we had to set it back to what it was, which I can't remember the name of, and my family will crucify me if I touch their computer again. Bottom line, is there any way that I can get my laptop to connect to the router? It picks up the signal, and I know the password, but it tells me that there's no signal most of the time, which there is because it's picking up the netgear router and says it on the software.

I know that's a horrible description of my problem, but any help at all would be appreciated. I'm too poor to buy a new pc right now.
 

A:My belkin bus card won't let me get on the Internet. PLEASE help me out.

Read other 6 answers
RELEVANCY SCORE 46

(originally posted in Operating sytems, but i think its more of a hardware issue ...sorry for the double post)
ok
so i installed a belkin wireless g card (f5d700) on my dell optiplex gx240 running windows 2000 pro back in december. This past Sunday it decided to stop working all of a sudden. I couldn't acces the internet or my local network. so i figured i would just reboot and the problem would be solved.

When i restarted i couldn't get past the windows 2000 load screen. so i powered it down and tried again and managed to get to the desktop, the mouse pointer was able to move around but i wasn't able to click on anything. ctrl+alt+del just cleared the desktop but didn't bring up that other screen that has taskmanager and allows you to shutdown.

i googled and googled and realized (i think) that its a hardware issue. So i removed the wireless card and boot up went smoothly. i did a virus scan & nothing was found, so i uninstalled and then reinstalled the belkin software again. I shutdown the computer, put the card in, restarted, boot up was fine, the installation completed successfully. i was instructed to reboot again, so i did ... and it just hung on the desktop with no icons and never shutdown. so i turned it off manually and restarted and i'm stuck on the w2k loading screen again.

Any ideas why this may be happening?
is there a way to make sure everything is uninstalled to ensure a clean install (e.g. drivers, software) ?
any advice on how... Read more

A:W2K and Belkin Wireless Card

bump
 

Read other 1 answers
RELEVANCY SCORE 46

ok
so i installed a belkin wireless g card (f5d700) on my dell optiplex gx240 running windows 2000 pro back in december. This past Sunday it decided to stop working all of a sudden. I couldn't acces the internet or my local network. so i figured i would just reboot and the problem would be solved.

When i restarted i couldn't get past the windows 2000 load screen. so i powered it down and tried again and managed to get to the desktop, the mouse pointer was able to move around but i wasn't able to click on anything. ctrl+alt+del just cleared the desktop but didn't bring up that other screen that has taskmanager and allows you to shutdown.

i googled and googled and realized (i think) that its a hardware issue. So i removed the wireless card and boot up went smoothly. i did a virus scan & nothing was found, so i uninstalled and then reinstalled the belkin software again. I shutdown the computer, put the card in, restarted, boot up was fine, the installation completed successfully. i was instructed to reboot again, so i did ... and it just hung on the desktop with no icons and never shutdown. so i turned it off manually and restarted and i'm stuck on the w2k loading screen again.

Any ideas why this may be happening?
is there a way to make sure everything is uninstalled to ensure a clean install (e.g. drivers, software) ?
any advice on how to approach and resolve this problem would be appreciated.
thank you
 

Read other answers
RELEVANCY SCORE 45.6

Ever since i purchased a belkin wireless network card and router. I am no longer able to play some pogo games or boxerjam. I am able to get into the rooms but i eventually get booted, the error message is saying it is because of lagging or connectivity issues is there any way i can resolve this. I contacted my isp and they said it is working fine (broadband-adelphia). i contacted belkin and they said to add pogos port to a virtual server but the pogo games werent listed in the drop down box . It is happening on both the computer where the router is connected to and the laptop with the network card. any help would be appreciated.
 

A:belkin wireless card lagging

You would be better off if the computer you are playing games on are wired vs wireless.

Another thought...see if you can find the info/configuration settings from the game site. The presets in the dropdown menu are preconfigured, but you should be able to manually set one up if they can provide you with the correct info.
 

Read other 1 answers
RELEVANCY SCORE 45.6

I am new here and hope that I put this in the right place. but I just had my laptop wiped and the XP operating system re-installed a day ago. my problem is that now I am trying to re-install my USB 2.0 card and my sony dvd DRX 800UL drive to my laptop but it is not working properly. it does recognize that the dvd drive is hooked up but it says it is not operating at the high speed 2.0? there is also the safley remove hardware icon in the system tray and it looks like there is too much stuff there. I do know how to go into safemode but dont know that much about how to use it, so please try to explain in some detail. any sugestions please help. thanks.

A:Please Help.. Trouble with Belkin 2.0 USB card and driver

Doesnt anyone know how to do this? I havent even had 1 reply?

Read other 1 answers
RELEVANCY SCORE 45.6

Ok,
So my PC crashed last week due to a trojan and I had to do a full system recovery on it. Ive gotten it back to ship shape now save for the wireless card. My PC is a Gateway 504GR with XP Home. The wireless card is a belkin f5d7000. It shows up in device manager as (Ethernet Controller?). Ive tried downloading software from belkin and from gateway with no solution. Im not too computer savvy but Im not illeterate either but I just cant fix it. Can anyone help? Let me know if I can tell you anything else about the machine.

Cheers, B
 

Read other answers
RELEVANCY SCORE 45.6

Hello i have recently installed a wireless peer to peer network in my house. The system is a Belkin 54g one. The system runs fine however every so often my laptop will reconnect to the router. I lose my internet connection briefly and any downloads that are going at the time are also interupted. How can this be fixed??
 

A:Belkin wireless network card

Read other 11 answers
RELEVANCY SCORE 45.6

So I have a Belkin N1 Wireless USB Adapter Card that was working fine until it broke. My brother has the same type that he uses for his old computer that I stole. Whenever I plug it in it says I don't have the proper drivers for the device. I thought this was weirs because it's the same model card and everything. I went online re downloaded the drivers and when the process told me to plug in the card it does not recognize it. I don't know what the problem is with the device. It works fine on my brothers computer and the device is recognized by my computer...just not as an internet card. What is the problem? Does it have to do with the drivers, the device, or my computer?
 

A:Belkin USB card drivers not reading

1. There should be a tag on the router. What's it say is the model number?

2. When you connect/ disconnect the USB adapter, do you hear the Windows USB ding/dong sound as you plug in and remove the device?

3. Connect the device.

Make sure all your devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post

 

Read other 1 answers
RELEVANCY SCORE 45.6

hey im havin trouble with my wirless card to work right i finally got it to connect to my network but now its not accessing the internet when the other laptops are just fine. any suggestions?
 

A:Belkin notebook wireless card

You need to configure the wireless card to obtain the IP addresses automatically
 

Read other 1 answers
RELEVANCY SCORE 45.6

Ok so I have this old old old sager laptop with an amd k6 2 300 mhz processor windows 98 SE. Someone gave me a belkin f5d7010 wireless g card and it just wont work.

Initial install failed the software installed fine but it would not work witht he card at all. I tried to install once more and by chance I had an NIC network card (wired) plugged in one of the pcmcia slots installed the software restarted and realized that the beklin wifi card was no in the pcmcia slolt so I just shoved it in the other slot (slot b) and I saw the belkin wifi utility pop up and start scaning wifi connections and to my amazement it worked. I checkd my email lookup up some things just for fun and all was well for a few minutes.

Then, My laptop crashed ever since then I could not get this wifi card to work.

Ive tried alternate driver versions and nothing works. I noticed that this thing only supports 98 SE not 98 first edition so I updated to 98 SE no big deal I have an old win98 cd so I installed. Renived the software re-installed and nothing. It just won't work.

Someone please help me maybe I need some update or something to make this work.
 

Read other answers
RELEVANCY SCORE 45.6

Hi i am having a problem with my wireless card. it is a little hard to explane so i will try my best. the problem is when my computer is put into standby or hibernate wich is every night. the problem is when to computer comes back on the wireless card has some problem and dose not pick the networks up untill i disable it and inable it agian. the card is a belkin wireless card modle F6D3000. can anyone help. i have windows xp pro service pack 1 at the moment
 

A:Solved: Belkin wireless card

Read other 6 answers
RELEVANCY SCORE 45.6

I'm running Windows 98 and I'm having problems installing a PCI card I just got. In the device manager under Other Devices there's a question mark next to the PCI Universal Serial Bus. I've followed the instructions on in the manual and on Belkin's website, but I can't seem to get this working. Any suggestions?
 

A:Trouble installing Belkin USB 2.0 PCI card

Read other 7 answers
RELEVANCY SCORE 45.6

Ok, here's the problem, installed the card, installed the drivers, got constant drop-outs. Installed a newer set of drivers downloaded from the internet, still got drop-outs. Now before I throw out that card and put it under a hammer I thought I'd come over here and ask if you knew any solutions.
I already read on the internet that the standard Belkin drivers suck, and that you could download other drivers from different manufacturers but I'm unsure which I should download.

Thanks for the help in advance.
 

A:Belkin wireless G desktop card.

Read other 7 answers
RELEVANCY SCORE 45.6

my belkin wireless g usb network adapter will not find any wireless networks and is not being read as a belkin 54g usb network adapter
it is being read as a MWN-USB54G USB Adapter it only started reading it like this a weekago i have had it for a bout a year now has it just stoped working or is thare some thing you could help out with
 

A:belkin wireless card not working

Hey

Try going to belkin's website and downloading the driver for the adaptor, and installing that driver to the hardware. Could be that the hardware has had a driver update that hasn't quite worked...

Shout if you need a walk thru on how to do this.

Cheers
 

Read other 3 answers
RELEVANCY SCORE 45.6

Hi,

Im having some trouble finding the network adapter drivers for the
Belkin Wireless Card G (F5D7000)
for Windows 7 Ultimate 32bit. I have looked on the Belkin website but i cant find it anywhere - can only find VISTA


Or failing that does anyone know where i can get the RaLink RT2500 Driver as i know that Belkin use that chipset.


Thanks in advance

James
 

A:Belkin Wireless Card G driver for Win 7

If it is not on the Belkin website, I would assume they do not have a driver for Windows 7. Best bet is to either try the Vista Driver and hope for the best, e-mail Belkin and see if they are working on a W7 Driver, or invest in a new card.
 

Read other 3 answers
RELEVANCY SCORE 45.6

Hello, iv currently upgraded from Windows XP to Windows 7 Ultimate, iv tryed to install the Drivers for my Wireless network card and it says its not Supported. I then went looking on Belkin website looking for Driver updates there isnt any.

Belkin Wireless Pre-N Notebook Network Card
Model Number F5D8010

How can get my Wireless card Working?
Please Advise.

Thankyou.

A:Belkin Pre N Notebook Card Not Supported

Hi and welcome to TSF

Have you tried the compatibility mode? :

http://www.w7forums.com/application-...mode-t314.html

If that does not work, you need a new card that will work with Win7.

BG

Read other 1 answers
RELEVANCY SCORE 45.6

G'day Everyone,

So having spent hours attempting to get a Belkin F5U222 High-Speed USB 2.0 Notebook Card to work I'm all out of ideas. I have finally managed to wrangle the card to a point that one of the slots works as a USB 1.1.

The card has two USB 2.0 slots;

-Laptop is a Fujitsu S Series Lifebook
-Windows XP with SP3
-Single Card slot only

I have installed as per directions, drivers then plug in on restart. Initially it was detecting it as a Real Time Clock, which I eventually overcame.

Having restarted, uninstalled, restarted, installed and restarted before putting the card in, the device manager now shows the appropriate USB root hubs however the controllers come up as 'NEC PCI to USB Open Host Controller' - I assume that they need to be enhanced host controllers? When i attempt to update the drivers from a specific location (I have downloaded the latest drivers) the system doesn't register the Belkin driver and so I'm unable to select it. When I choose 'have disk' windows tells me that the driver does not contain information relating to the hardware.

As it stands the device manager shows one 'NEC PCI to USB Open Host Controller' as working correctly - and it does as a USB 1.1 only! The other has an exclaimation mark. In addition to my normal working USB 1.0 slots, which show up and work fine, I have a second heading of 'Universal Serial Bus Controllers' under which 'PCI Class USB 2.0 Enhanced Host C... Read more

Read other answers
RELEVANCY SCORE 45.6

Hi guys

Cd will not run hat make with belkin PCMCIA card keeps saying illegal operation the cd is for windows 98 please help I can't get online without it

A:Belkin wireless PCMCIA card cd

  
Quote: Originally Posted by Rosewood


Hi guys

Cd will not run hat make with belkin PCMCIA card keeps saying illegal operation the cd is for windows 98 please help I can't get online without it


Can anyone help please

Read other 9 answers
RELEVANCY SCORE 45.6

I have a question, may be someone knows: I ran out of the USB slots, so I decided to use an add-on PCI card. I have an old Belkin USB 2.0 card, not sure whether this is exactly the model number that I found on their website, but may well be, since the card, according to Belkin is supposed towork on "Windows? 98 SE, Me, 2000, OS, or XP with USB 2.0 support".

Now, will this thing work with Windows 7 x64? Is there anyway to find a proper driver, or the system has some generic driver that would be good enough?

I could just try and plug it in of course, but thought to ask first, may be someone knows and will save me some trouble - if there is any trouble waiting for me .

Thanks in advance.

A:Belkin F5U220 USB 2.0 5-Port PCI Card

Well, if anyone's interested - it works. I just plugged it in and there is no problem that I can see so far.

Read other 2 answers
RELEVANCY SCORE 45.6

I can't find a working driver for it. Maybe one does not exist? I downloaded the Vista driver from Belkin's website, but it didn't work. Is there a generic driver for Win 7 that exists that would work? Windows update didn't find anything.

Part number F5D7001
Version 1000

A:Belkin wireless g Desktop PCI card

Install the Vista driver like this:

Right click it in device manager. Update driver software. Browse. Let me pick. Have disk. Browse. Double click the .inf. Hit ok. Hit next.

Read other 2 answers
RELEVANCY SCORE 45.6

Just wondering if anyone is running one of these under Windows 7, as I'm about to upgrade from XP and can't find confirmation of its compatibility anywhere.

If you're running one, can you please mention what version it is too.

Thanks.

A:Anyone using a Belkin Wireless G F5D7001 card?

hi MFP welcome the card is not officially supported under win7(or Vista) but you should be able to use it under compatibility mode ,here is a link to the driver download page Belkin : Support : High-Speed Mode Wireless G Desktop Network Card : F5D7001uk you may actually be better off upgrading the card for a newer model ,they are quite cheap to replace

Read other 9 answers
RELEVANCY SCORE 45.6

HI,
I have purchased a belkin usb 2.0/firewire 6-port pci card to put into my machine so that I could then plug in a dvd player with a firewire connection. I installed the card and the driver and it seemed to be picked up ok and I plugged in an external firewire dvd player and that was picked up fine and I could work away with the new drive - however my pc won't shut down. I press shut down and it seems to be shutting down until the end and then the machine restarts and this happens all the time. When i uninstall the card the pc it shuts down ok so it is definately the card. I have emailed belkin about this but no reply and i have rang them and they said it could be a bios issue but no further info. I have tried it on another pc and the same thing happens- anybody got any ideas- please help.
 

A:belkin pci card not letting pc shut down.

you already know what the problem is, because it happened in more then 1 machine.

Will the machine shut down with the card installed, but no drive plugged into it? if that works, just unplug it when you want to shut down, if that doesn't work, then you have 3 options:

1. if you have a free 5.25" drive bay, take the DVD drive out of the external case and install it inside your computer(this is the best option if you have a free bay), or...

2. leave your machine on (i always leave mine on), or...

3. return that firewire card and buy another brand (not belkin)
 

Read other 1 answers
RELEVANCY SCORE 45.6

Hello,

I am upgrading my pc using some parts from a mates pc he no longer needs. I have upgraded in order to play Rainbow 6 Vegas.

The MB is a Gigabyte GA-8SQ800 with an Intel P4 3.06Gz HT chip. Ever since using this MB the behaviour of the wireles network card has become eractic. The card is a Belkin Wireless G Desktop Card (F5D7000).

Once booted all appear well. The belkin icon in the task bar is green and shows the connection to the router. After a few hours it drops the connection (icon turning red) and will not reconnect. I have used my laptop to verify that it is not the router. I cannot get the belkin wireless utility (it will not let you use the windows one) to even see the router to reconnect.

When I fitted the new MoBo I installed a fesh copy of XP (with SP2) to try and avoid any such issues.

If I reboot the machine it sometimes reconnects, but last night it would not. The belkin icon turned green for about 5 secs and then went red.

Device manager in windows seems to think the card is working properly.

I have had it suggested to me that there may be an 'interupt' issue, but not really sure what that means or what to do about it. Is this related to the IRQ in the BIOS?

Any suggestions would be appreciated.

Thanks, Jon
 

A:Belkin Wireless Card - Disconnecting

What version of Windows do you have? If you have XP SP2, then disable the Belkin wireless utility and service. Use the WZC client that is included in SP2. If you have XP SP1 or XP, then disable the WZC utility/service and use the Belkin utility.

Having both running at the same time can cause connection issues.
 

Read other 3 answers
RELEVANCY SCORE 45.6

Hi guys i have just bought a Belkin F5D9010 notebook card for my laptop that has vista on it but i having loads of problems getting the card to work. I can find drivers but i can not find a Belkin Wireless card utility that will work on Vista.

I was wondering if anyone has any info on how to fix this problem please?

Belkin F5D9010 Wireless G Memo Notebook Card Version 3000uk.

Acer Aspire 5630 laptop 32Bit running Vista Home premium.

Thanks guys.
 

A:Belkin Notebook Card and Vista

Why are you trying to use a third party device since the machine came with a wireless connection built in?

From as add on this machine.
The notebook does include 802.11a/b/g wireless connectivity, and you also get a standard selection of ports and connections, but FireWire is noticeably absent.
 

Read other 1 answers
RELEVANCY SCORE 45.6

I recently built a new computer and my friend gave me a free Beklin Wireless G Desktop Card for my new computer. I installed it and everything works fairly well. However, when I use the internet, I constantly get disconnected (especially when I play games or when I'm downloading something). Although it is a Wireless G card, it is backward compatible to run on my D-Link Di614+. Which only supports B. Is there a specific set up that I'm suppose to do to solve this problem? And please simplify your comments/advices in the simplest way possible. Networking is my worst department when it comes to computers.
 

A:Belkin Wireless G Desktop Card

Read other 16 answers
RELEVANCY SCORE 45.6

Hi
I need driver to BELKIN Wirelees G Notebook card F5D7010 with Windows 7

thanks for help

A:BELKIN Wirelees G Notebook Card

hi musiek , here is the link to the drivers Belkin : Support : F5D7010 Driver again there are no win7 drivers but depending on the version no of the adaptor you have the choice of XP or Vista ,again install in compat mode

Read other 1 answers
RELEVANCY SCORE 45.6

i have recently downgraded to windows xp from vista ever since then its been one thing after the next problem wise drivers error messages not being able to register windows and now most importantly with this lastest reinstall of windows my wireless card isn't working right

I am using a neighboors net i know its not the signal b/c it wasn't this bad when i had vista and it wasn't this bad when i had xp reinstalled the first time the wireless card has trouble holding the signal i have to run spybot for it to stay halfway stable and even that it still barely works my net bouncing in and out it keeps disabling itself and when i try to re-enable it it says connection failed i have to restart my computer or unplug it and plug it back in to get it to work again for a little while

the only thing i can think of to list here b/c i dont know much about computers is under device manager the following have ?marks next to them drivers have no idea if its related or not
Ethernet controller
PCI simple Communications Controller
SM Bus Controller

if you need any info about my computer please ask and i will get it for you thank you.
 

A:Belkin wireless card disabling itself

Read other 16 answers
RELEVANCY SCORE 45.6

Currently running 1meg Broadband wireless through an Ovislink Router.with Encyrption, Works perfectly with my Laptop but when it comes to my home PC thats another story. I Installed the card as intructed And it worked for about 10 minutes. It started to loose singal despite being practically 5 feet away from the router. Then When i searched for available networks it couldnt pick up my home network or any others in the area. It eventually found the network after i restarted the system but then it started to loose connection every 8 -10 minutes now it can find the network but cannot acces the internet all i get is "page cannot be displayed"

Any Ideas?

thanks
 

A:Solved: Belkin Wireless G Card HELP!

Read other 8 answers
RELEVANCY SCORE 45.6

I'm relatively new to the subject of networking, so this problem has got me stuck. I acquired this card a while ago, and used it on my Dell Inspiron 8100 notebook to access my encrypted wireless network. I have an Actiontec DSL modem with a wireless gateway GT701-WG. I was able to access the internet just fine. One day, I decided to try and access another network, and when I attempted to reconnect with my network, I was unable to connect to the internet. I've checked my network password, and it is correct, and I still can't access my network. I've checked my signal, and it's also at 100%. Is this my wireless card? Or is it my computer (which it might be, because when I try to connect it to my LAN with an ethernet cable, it STILL doesn't work) ? Any help would be greatly appreciated!

Thanks
 

A:HELP WITH BELKIN WIRELESS CARD F5D7010 v. 1

Read other 11 answers
RELEVANCY SCORE 45.6

I have recently installed a Belkin F5D8013 network card. It comes with the utility and driver on disk, I have installed, upgraded many times but the utility is dead, does not respond to any commands. I end up using the xp utility. Anyone else have any ideas?
 

A:Belkin N card utility not responding

It may be that xp has the better driver. You might try Belkin online and see if you can download new software for it. Jazz
 

Read other 2 answers
RELEVANCY SCORE 45.6

I just got a computer(not a new one), and I also got a Belkin wireless card with it and I can't seem to get it to connect to my Linksys router. I tried switching over to the XP Zero config. or something like that but I don't see any difference. I'm not even sure if I did it right, any help would be greatly appreciated.
 

A:Belkin G wireless card not working

Read other 15 answers
RELEVANCY SCORE 45.6

Hi everyone
Ok, newegg.com offered a combo deal for a dlink dir-655 with belkin F5D8013 N Wireless Notebook Card for $65.00 shipped so i jumped on this deal and ordered. but for some reason I'm unable to achieve speed of more then 54 \ 81 Mpbp ( transmit speed showing at 135 and receive speed at 54 and sometimes 81 Mbps ) .not sure if i am still overlooking a step or two or some kind of tweak in router setup that would help achieve the full 300Mbps.i searched thru d link forum for solution but came up empty.

dir-655 Hardware Version: A4 Firmware Version: 1.21
dir-655 Wireless setting as follows:
802.11 Mode : Mixed 802.11n and 802.11g ( 802.11n only with same results )
Auto Channel Scan : Enable ( also tried to lock to specific channels but same results )
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40 Mhz ( locking into 802.11 only with 40 Mhz gave me same results)
Security Mode : WPA-Personal
WPA Mode : WPA2 Only Cipher Type: AES

since I'm not to tech savvy i did not try to tweak any other setting in router so all other settings are at the factory defaults.(other then the wireless setting as per above). if anyone can suggest a solution to increase my speed it would be greatly appreciated.
here are the links for both the router and wireless card:
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127215
http://www.newegg.com/Product/Produ...&cm_re=belkin_wireless-_-39-314-010-_-Product

Thanks,
Amber
 

A:dir-655 router & belkin n wireless card

Read other 9 answers
RELEVANCY SCORE 45.2

I recently bought a USB 2.0 upgrade kit, but after plugging it in, my computer hasn't seemed to recognise it as 2.0 or even a Belkin product. Drivers were installed when I started windows, but they were just generic Microsoft ones, and I can't seem to find the Belkin drivers anywhere. I tried using the ones that were on the disc, but windows tells me that up-to-date ones are already installed. I've contacted Belkin, after looking all over their site (the product I have doesn't seem to be listed in the driver section, but I found a pdf manual for it). If anyone can help I'd be really grateful. Cheers in advance

A:Belkin USB 2.0 Dual-Port PCI Card driver

  
Quote: Originally Posted by Monkae


I recently bought a USB 2.0 upgrade kit, but after plugging it in, my computer hasn't seemed to recognise it as 2.0 or even a Belkin product. Drivers were installed when I started windows, but they were just generic Microsoft ones, and I can't seem to find the Belkin drivers anywhere. I tried using the ones that were on the disc, but windows tells me that up-to-date ones are already installed. I've contacted Belkin, after looking all over their site (the product I have doesn't seem to be listed in the driver section, but I found a pdf manual for it). If anyone can help I'd be really grateful. Cheers in advance


Hi Monkae,

What's the full name & model number of your Belkin device? Also, it would be helpful to fill out your system specs (click 'User CP' on the topnav, then click 'Edit System Spec').

Thanks!

Walker
Windows Outreach Team

Read other 1 answers
RELEVANCY SCORE 45.2

Hello all,

I'm looking for ideas on troubleshooting a laptop with a Belkin F5D7010 54G PCMCIA card, trying to connect to an 802.11g network. The card is installed on a laptop running Win XP with SP1 and up to date with all MS patches. The computer sees the card, but the card does not see the network. Occasionally, as the card scans for available networks with the Belkin Network Utility, the access point will show up briefly, but quickly disappear. the network is run without encryption and broadcasting SSID, all Belkin equipment and there are three other computers (Win2K, XP and 98) currently conected to the wireless network without problems. Running MacStumbler at various points of the house clearly shows network with good strength. Things I've done:

- Installed new drivers for card from the Belkin site - no effect
- Connect laptop directly to router via ethernet cable - laptop connects to network without problems
- Downloaded and installed all remotely applicable patches from MS - no effect
- Tried another card (same model/make) - same symptoms.
- Tried moving the laptop next to wireless router - no effect
- Tried both cards in another laptop - other laptop (Win2K OS) connects with no problem (! points to something on laptop as the problem, not card)
- Checked that radio on card is enabled (you never know)

the puzzling bit is that the Laptop with the card used to connect without problems before the holidays. I've changed one piece of network config since ... Read more

Read other answers
RELEVANCY SCORE 45.2

I just bought a belkin g wireless router to setup my network. I currently
have two windows PC and two mac's on the network. The windows notebook is on
the network with the linksys wireless card and everything is working fine
with speeds of 54 Mbps. I added the WEP 128 digit for security and the
linksys card would not get past the router. The windows desktop with the
belkin wireless card was still on the net along with the mac desktop and
notebook.

Is the problem with the linksys notebook card and the WEP settings? I would
like to still keep the network secure but don't want to have to buy another
card, I've already had to buy the new router to replace the linksys one to
get the mac's online.

The windows CP are using Windows XP Home and the Mac's are running OS X.
 

A:Belkin G Router with Linksys notebook card

With different brands of wireless components, you need to disable any "turbo" functions, and use hex keys, not the ASCII passphrase to generate the keys.
 

Read other 2 answers
RELEVANCY SCORE 45.2

I have purchased a Belkin Card Reader ref no. from the packet FAU044bt. This number does not bring up any
info on the web and my Windows 7 computer is not picking it up. I am trying to use it to import photos from a
Canon PC 1586 camera. Can anyone help ? Have I bought the wrong type ?. It had no directions in it.
It is called a UNIVERSAL MEDIA READER The information on the package literally needs a magnifying glass to read it ! It says on the box it supports Windows 7
 

A:Belkin Universal card reader problem

Read other 12 answers
RELEVANCY SCORE 45.2

Ok. I inserted my Belkin

Wireless Notebook
Network Card
IEEE 802.11g/54Mbps
model no. F5D7010

after i did that i got to this screen http://img105.echo.cx/my.php?image=10et.png

then this http://img105.echo.cx/my.php?image=29fa.png

i hit next, and got this message http://img105.echo.cx/my.php?image=32xz.png

i hit ok and got this http://img105.echo.cx/my.php?loc=img105&image=40as.png

i put the disk in (which autoran its program but i didnt hit anything on it yet) and pressed ok

nothing happens.
----------------------------------------------
after this i tried using the sick itself, ignoring the "Found New Hardware Wizard"

The CD is labvled "Easy Installation Wizard" Includes: Easy Installation Wizard and Installation Manual.

I finished with the program and it said all i have to do now is open up my browser and start surfing.

But as you can guess, i wasnt connected to the internet yet. So here i am now.
-----------------------------------------------

Thanks before hand for any help.
 

A:Belkin Wireless Notebook Network Card.

bump
 

Read other 1 answers
RELEVANCY SCORE 45.2

We have 4 notebook computers and 1 desktop. All were on a wireless network which functioned great until I decided to reformat the Desktop's HD.The 4 notebooks use a variety of wireless cards and our wireless router is a Netgear.
The computer with the problem is a pentium 2 on Windows 98. I reformatted it, Reinstalled the Belkin software and restarted the computer..then received this error message:
Error Starting program
The BCMWLTRY.EXE file
is linked to missing export
MFC42.DLL:6880
Cannot connect on this computer now (others still work fine)-All functioned well before on same PC with the same operating system.

I tried various solutions-updated windows, updated windows libraries (contains MFC42.DLL), uninstalled & reinstalled Belkin software several times, removed card before installation, installed the drivers from the Belkin website for this card..all to no avail. Still get the error message...still can't connect on the network.
Any suggestions appreciated
 

A:Problem with Belkin F5D7000 wireless card

Yes your problem is that wireless card will not work with Windows 98 Version 1. You will need to upgrade to Windows 98 Second Edition. This will fix your problem.
 

Read other 1 answers