Over 1 million tech questions and answers.

netgear dg834gsp ADSL modem router connection problems

Q: netgear dg834gsp ADSL modem router connection problems

I'm wondering maybe someone could help me or make a good suggestion/advise!
I'm little bit worried. I bought wireless netgear dg834gsp ADSL modem router, but i don't have ADSL connection. I have cable connection. Does this mean that my router is unusuable for my PC and my internet connection? Maybe there is some hope to make connection? I don't have any possibilities to change it, because I bought it abroad.

RELEVANCY SCORE 200
Preferred Solution: netgear dg834gsp ADSL modem router connection problems

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: netgear dg834gsp ADSL modem router connection problems

You can connect/configure it as an ethernet switch (if it has multiple LAN ports) and wireless access point, but you cannot use it as a router except with ADSL internet service.

Read other 2 answers
RELEVANCY SCORE 110.4

Hi,

I have recently had to reset my laptop to the original settings as bought from p.c. world.
Before I did I had managed to get the wireless working ok.
However since then it displays this message "The settings saved on this computer for the network do not match the requirments of the network."
I ran through thed setup cd and it said that the wireless connection was ok to use.
But only the wired does.
The router is a "NETGEAR DG834GSP".
I do not know how to check settings and if needed change them.
Please can someone point me in the right direction.

Thanks,

Ned...
 

A:Wireless Connection Problems NETGEAR DG834GSP

Read other 13 answers
RELEVANCY SCORE 88

Hi,I have no problems opening ports on a modem/router combo but I can never get it working on router that is being fed the internet from a modem.

Can anyone help me here, ive tried putting the routers ip address on DMZ in the modem but this didnt work.
 

A:Openeing ports on a router with an internet connection from a adsl modem?

Read other 9 answers
RELEVANCY SCORE 87.2

I've tried searching the forums for this but can't find anythig so here goes.
Running winxp on both machines. Have a Netopia 3351 adsl-modem to connct to the internet, configured to not work as a router. internal ip-adress 10.0.0.1
Have set my 3com wlan router to work as a switch (i.e disabled the dhcp server option in it), and plugged the cable from the netopia to the wan port of the 3com.
I've set the gateway to be the adress of the modem (10.0.0.1) and the internal ip adress of the device to be 10.0.03. Have set the dns adresses to be the ones given to me by the isp.
I then proceed to connect my computers to the 3com via tp cable. (so the wlan is NOT the reason for the lag ) and set properties to be the internal ip-range of the 3com (i.e. 192.168.1.*) and the gateway to be 10.0.0.1 and the dns adresses the same as provided to me.
I first tried running the 3com as a dhcp, but that didn't work any better than the manual setup. And I need the 3com to connect more than one comp cause the netopia only has one switch port.
Everything works, I get good speed and all. But I keep lagging out of irc and my downloads sometimes stop.
As far as I can understand it sometimes clogs and stops sending packets through for a little while.. Even though the internet connection works it's not good enough for me since lagging out of irc 3-10 times an hour and dl's needing resume all the time can get very annoying very fast

Hope I've given you enough inf... Read more

A:Lag problems with adsl-modem and router

just wanted to let other ppl know.. a friend of mine came up with the very easy solution.. enable the router capabilities in the modem (netopia) again and plug it into the 3com in one of the switch ports, and then enable the get ip from dhcp again on the pc..
simple yet elegant and effective.. it's now been running for 15 hours without a single dis con
 

Read other 1 answers
RELEVANCY SCORE 87.2

hi i have had the Belkin ADSL Modem with Wireless-G Router for a while now and have had a tesco's 2.2mbs connection but i have just upgreaded to a tiscali 8mbs connection, i no i can get the full 8mbs speed through the supplied modem but am just wonederind if the Belkin ADSL Modem with Wireless-G Router's buitl in modem is fast enogh to get the full 8mps or if it wil run slower. would be great to no i was just wondering
 

A:Belkin ADSL Modem with Wireless-G Router WHAT IS ITS MAX INTERNET CONNECTION SPEED

There THe belkin modem/gateway shouldnt limit your speed capabilities. You should be able to find the speed listed inside the modem's status page. To do this..
Click start>run>In run type CMD
In the black window type IPCONFIG and then enter. Note down your default gateway.
Open a browser window and enter the gateway's address into it. Click go
This should take you to your gateways graphical user interface.
Look for a status tab or see if it lists connection speeds on the general page.

Also you can test speeds at different sites. Google search broadband speed test and choose 1 of the millions of sites
 

Read other 2 answers
RELEVANCY SCORE 86.4

I am trying to replace a wireless router that blew up with a linksys WRT54G. We use a US Robotic 9015 Adsl modem. When we set up the linksys router with the supplied software the router seemd to set up correctly but we cannot connect to the internet.
 

A:Wireless router/adsl modem problems

Hi

At what part is it failing, go into the router settings and check that your user name and password is correct.

If need be re run the software setup and make sure you havent missed anything.

Regards
 

Read other 4 answers
RELEVANCY SCORE 85.6

Hi i recently purchased a Zyxel Wireless ADSL Modem Router P660HW i have every cable you need and when i connect my dsl cable to the router it doesnt pick the internet up can someone please help
 

A:Zyxel Wireless ADSL Modem Router Problems

Read other 16 answers
RELEVANCY SCORE 85.2

I recently added a Netgear wireless router(WNDR3400) to my Clearwire Modem and my ability to use the Desktop Remote Connection went Bye Bye. This is probably because I had to set my computer to DHCP to get the internet to work. Can any one help me with reestablishing the Remote Desktop Connection? I'm confused by the portforwarding. Do I need to forward the Clear modem to the router and the router to the computer. Do I set the router to Static IP and leave the Clear Modem to DHCP or do I need to set it to Static as well. Any help, Please?
 

A:Remote Desktop Connection thru Clear Modem and Netgear Router

You need to portforward (port 3389, I think) on the Netgear router to the computer. Best to assign a static IP, or use address reservation if the Dhcp server has that feature, for the computer.
 

Read other 1 answers
RELEVANCY SCORE 84.4

Hi can anyone help? I'm having problems (wired) networking 2 pc's both on xp to share broadband. i have the two ethernet cables going into the router as well as the adsl line. The two computers can see each other but the problems is, it would appear is the router. When i got to belkins auto setup on 192.168.2.1 it infrequently works. when i do get a connection one of the computers has limited access to certain sites like ebay. I have turned off xp's firewall, left panda anti virus on, and even tried turning off the routers firewall but when i do that i lose connection. It seems that the router is unstable! Is there a possible firewall/security conflict going on here? why do i keep loseing connection? any help would be much appreciated! also one of the computers has "stopit" dialer installed recently set up for broadband, might this be a problem too, can't uninstall this by the way!
 

Read other answers
RELEVANCY SCORE 83.6

Hi, my friend is in Japan, and he's signed up for NTT's ADSL service, They say he can 'rent' a modem, but he would need to get a router too if he wishes to use more computers. However he doesn't want a 'multi-box' solution, he wants it in 1 box (like in other countries), a combination ADSL Router/Modem with Wifi. However, he cannot buy them in a few computer stores he has visited. I am visiting him soon, and we're trying to understand if I bring over an ADSL router, if that would work.. I know about the power limitations, but that aside, can it work?

ps. Thinking of bringing something like the following models ( I will purchase once I know for sure )...
Netgear DG834GT 108Mbps Wireless ADSL Modem
Belkin ADSL Modem with Built-in 125g Wireless Router
Linksys by Cisco WAG54GS Wireless-G ADSL Modem Router

pps. I see a lot of modems listed on Amazon with ADSL2, I don't think they have ADSL2 in Japan (according to wikipedia), would ADSL2 modem work with ADSL.?

MANY MANY Thanks if anyone can answer this
 

A:Can an ADSL Wireless Modem Router work with NTT's ADSL service in Japan

Read other 6 answers
RELEVANCY SCORE 82.4

I am installing a netgear ADSL modem DG834 v2, I am asked for ADSL configeration information from my ISP provider.
Where do I find this infomation?

John
 

A:netgear ADSL modem

Usually on the webpage of your ISP provider.

Most have settings available.
 

Read other 2 answers
RELEVANCY SCORE 82.4

I've currently got a 512kb/s adsl connection but will be moving to a faster 1mb/s connection in next 2 months.In meantime I need to get my other PC to share same connection. So must be wireless. As I understand it a 4 port wireless adsl router means that basically you have an adsl modem that not only controls upload/download link to the internet but lets u plug in 4 PC's hardwired into modem? and then as well as that connect wirelessly?

I'm only looking to connect two PC's to it...one hardwired in and the other wireless equipped with a USB wireless stick.

Would this be suitable?

http://www.ndo.com/ndo/Products/Voyager_2100_ADSL_4_Port_and_Wireless_Router_(802.11g)/prdvoy2100router.html
 

A:Sharing internet using ADSL. Which router/adsl modem to buy?

I suppose this is what your ISP is trying to sell you..

It will probably work, but I would recommend a product from a brand manufacturer who will actually release patches and support you after two years.

Look for similar products from Linksys, 3Com, SMC, D-Link, Netgear
 

Read other 5 answers
RELEVANCY SCORE 81.6

Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gif
 

A:how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Ndhingra said:



Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gifClick to expand...


The easiest way is to run the CD that should have come with the Router, if you havent got it then you will have to configure it manually.

Full instructions can be found on the netgear website here.

Regards
 

Read other 1 answers
RELEVANCY SCORE 80

...before I trash it!

Hi folks!

I've just bought a Belkin ADSL Modem with High Speed Wireless G-router. The networking bit ( = filesharing ) to my other PC = no probs, using the same company's wireless USB adapter, but I can NOT get it to connect to my Tiscali Internet account, and I'm on the point of putting it through the window.

On the grounds that I think new forum users like me should search to see if the question has already been asked/answered before, I did a search and did see that a chap called Diamond Geez had a very similar problem in July, but sadly I've not been able to get the solution offered to him to work in my case.

The scenario is that I've put my user-name and password in the appropriate boxes on the router's web-based set-up screen, and dispite the fact it's home page confirms the correct upstream/downstream figures and both modem-lights are illuminated green on the front of the modem/router, I cannot get it to connect, always showing "NO connection" in red at the top of the screen.

I've tried various options such as alternating the connection-type from PPPoE to PPPoA (and back again), I've tried LLC and VC/MUX encapsulation, all to no avail.

I have DHCP Server enabled on the LAN setup, I have DNS ticked as "Automatic from ISP"...I'm coming to the end of my thether!

Any geniuses any ideas before I set fire to the bloody thing?

Really, REALLY appreciated!
John
 

A:Belkin ADSL modem/router: "NO connection" Help!

Read other 6 answers
RELEVANCY SCORE 79.2

Hey guys i have a real big problem, the wireless router im using " Netgear 54 mbps Wireless ADSL Firewall Modem " isnt working properly, the computer which it is plugged into can go on the internet and stuuf but cant connect to the main aol program.. very odd, also the recieving computer isnt getting a proper signal, it keeps saying " limited Or No Connectivity " and now it trys to connect and cannot connect at all Anyone come across this problem before also any help would be appreicated.

Cheers, Coolone11
 

A:Netgear 54 mbps Wireless ADSL Firewall Modem Problem

does it work when connected by cable?

If so you may have a dodgy ariel. I've seen this before.

rgds
 

Read other 1 answers
RELEVANCY SCORE 78.8

Hi guys,

I have trouble connecting to netgear DG834GSP V3, the trouble is that I cannot access to the rounter login page. I have plugged LAN Port cross cable to the pc and one from internet port wire have already plugged in the master socket. It don't have the CD driver so it should usually works but I don't know how my twat brother done it before and it worked. I opened the internet explorer and I have input the router ip address in the address bar which it is http://192.168.0.1 and http://192.168.1.1 and pressed Enter. A small box appears that said the web page is unavailable while offline. Something got to do with the internet connection issue (Internet options). I don't know how to add one so that would get access to the rounter??
The rounter have connected to the ISP and its works fine but i can't access to the rounter login page. I have also tried ipconfig/all and there are no rounter information.
Please help!!!!!!!!!!
 

A:trouble connect to netgear DG834GSP rounter

Please show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 78.8

I am trying to use Bit Torrent and don't ever seem to be able to connect and have read somewhere that the firewall on the router could be blocking the inbound traffic. I have no idea what I need to change on the settings so was wondering if anyone could help. It's a Netgear Wireless ADSL Router Model No. DG834G v2
Please help as it's getting frustrating as there is so much good stuff I need.

Many Thanks,

Tim
 

A:NetGear Wireless Adsl Router

Please visit the TSG Rules, and note that we provide no support for P2P applications or their problems. This thread is closed.
 

Read other 1 answers
RELEVANCY SCORE 78.8

I have a Netgear ADSL wireless router DG834G. It works fine and the Internet is accessible from multiple computers. However, I want to know if it is possible to use the router to share files between the computers connected to the router. If one can how do I do this or go about finding out how to do it?
 

A:Netgear ADSL Router and sharing

yes,
whats windows OS on each PC - you need to enable sharing.

http://computer.howstuffworks.com/home-network.htm
http://www.homenethelp.com/web/howto/index.asp
 

Read other 1 answers
RELEVANCY SCORE 77.6

i know how to put my modem in bridge mode from the setup page but after i put it in bridge mode i can't use internet ....and i have to reset it to defult factory settings... to use internet again/......

some one help...............
 

A:Solved: how do i bridge my siemens speedstream 4100 adsl modem with netgear wgr614v9

Read other 16 answers
RELEVANCY SCORE 76.4

hi,

I need help on bridging Belkin N150 F9J1001V1 modem router (primary, connected to internet using ADSL) and Linksys WAG54GS modem router (which needs to be bridged). I would appreciate if detailed step by step procedure is provided.

A:bridging ADSL modem router and another modem router

can you explain exactly what you want to do ?
and give IP address, of each router

Read other 7 answers
RELEVANCY SCORE 76

I have ADSL Internet
An ADSL Router

i also have a Freecom DataTank Gateway WLAN

I want to connect the datatank to the adsl router and use it as a switch but cannot seem to do it.

I set the datatank ip to 100.150.0.1 and told it to run as a switch
I set my router as a DHCP server with the ip 192.168.1.1

I Plugged the datatank into the router and can access the internet but cannot access the datatank user interface at 100.150.0.1

Anyone help please!
 

A:ADSL Internet, ADSL Router. DataTank (Cable Router) Daisy chain off ADSL?

problem solved.
 

Read other 1 answers
RELEVANCY SCORE 75.6

I was looking at getting a wireless router (either a D-Link 615 or a Netgear Rangemax WNR1000) and I'm not exactly sure how to set it up. I have a BEC Technologies 7402 TM (NOT GTM) adsl wired modem/router that my telephone company gave me when I switched to DSL. There are 4 LAN ports on the back of the modem/router, a line port that my telephone cable is connected to, and a console port that I don't use. 2 of the LAN ports are being used. One is connected to my cable box, the other has an ethernet cord that runs halfway around my house, through a wall and into a wall jack that my desktop computer is connected to. I only want to use the wireless router to connect to my Wii and one laptop, I would like to keep my desktop connection wired. I had previously tried to connect to xbox live by connecting my xbox to one of the LAN ports but I could never get it to work, so now I just switch the ethernet cords between my xbox and computer in the wall jack whenever I want to use one or the other. Will I be able to connect a wireless router to one of the LAN ports and receive a signal or will I have to connect the wireless router to the wall jack that my desktop is hooked to, and run the connection through the router? I've never setup a wireless network before so I'm a little new to this subject.
 

A:Connecting a wireless router to an adsl modem/router

Hi:here are links to sample dsl modem router to wireless router configurations..
http://kb.netgear.com/app/answers/detail/a_id/1080
And for dlink:
http://www.dlink.com/support/faq/default.aspx?question=dsl
And the tried and true Johnwill,TSG tutorial on the same subject.
Your modem probably is a modem/router combo.Here are some possible fixes .

a. Bridge the modem/router unit so that it bypasses the router function and acts as a modem only. Or,

b. Change the address range used by one of the routers, say, to 192.168.3.x. Or,

c. Use the second router as an ethernet switch and wireless access point per the following recipe.


Connecting two soho routers in a network

Tutorial from Johnwill from the Networking Forum

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining chan... Read more

Read other 1 answers
RELEVANCY SCORE 74.8

I have a Netgear DGN2200 (N300 Wireless ASDL + Modem Router) that I got from Goodwill. There is no WAN port behind the router... only LAN ports I see. How do I setup my Arris Cable modem to this Netgear Modem Router? I need help PLEASE!

Link to Netgear DGN2200: http://www.netgear.com/home/products/wirelessrouters/work-and-play/DGN2200.aspx

Link to Arris Cable Modem (PDF): http://www.arrisi.com/product_catalog/_docs/_specsheet/060510_Touchstone_Telephony_Modem_TM502G.pdf
 

A:Netgear Modem Router & Arris Cable Modem

if its ADSL you cannot use it as a router on a cable modem, its designed to connect to the telephone line and has a modem within the device
 

Read other 1 answers
RELEVANCY SCORE 74

I'm going to get ADSL from local provider. In their FAQ they say to get ITU G.992.1 (G.dmt) standards supporting ADSL modem. It's 512kbps down and 128kbps up connection.
So getting a separate ADSL modem and connect it to a router or should i get a ADSL router modem both in one device?
If it's a ADSL Router modem what brands or products you think the best?
I am thinking to buy D-Link DSL-504T (http://www.dlink.com/products/?sec=3&pid=373) Is it good choice? Anyother good ones or recommendations?

Other thing is if use this router modem to connect my 4 computer at home will it be possible to share files and do all the things like a normal LAN other than just internet connection sharing?
 

A:ADSL Router Modem

Read other 8 answers
RELEVANCY SCORE 74

Hi There

Newbie to these forums but have done some research within but can not find answer.

I have just purchased a Dell optiplex sx270 running XP home sp 3 from ebay for a friend.Before giving it I have updated it on my home network connected to my cable modem and router with no problems.

Taking it to her house the pc will not see her Maplin adsl2+ usb modem 4 port router/switch which works fine with her previous pc. I have tried connecting via USB and ethernet to no avail. I just get the cable is disconnected message/low connectivity.Whilst this is happeneing the modem-router looses the adsl light and searches across the 4 inputs.

At this point I found this lovely forum where a common starting point seems to be to do a stack reset so I did this as directed but to no avail.

I have done ip config onto a word document but cant work out how to upload it to here.

However none of the normal ip stuff is on there as it says media disconnected for the local area connection.

Hope you can help

Regards.

Fugi
 

A:New pc not seeing adsl modem router

Read other 6 answers
RELEVANCY SCORE 74

Hello,

I want to know suggestions of good Wireless ADSL modem router combo (two devices in one) from experience people. I have two floors house build from concrete blocks and cement. However , I looking for a device that has WAN port so I can use the device as router only if I want.

I have no idea if ADSL modem-router has WAN port or only has the phone line as input and Ethernet and wireless as output without having Ethernet WAN port

It would be good if you give links from www.ebay.com or other ebay sites and an item can be sent to United Arab Emerate

My maxmum price $100 including shipping
 

A:Looking for ADSL modem and router in one but...

If you're looking for a device with an Ethernet WAN port, just buy a separate modem and router, problem solved. I doubt you'll find many options of a single unit with that capability.
 

Read other 3 answers
RELEVANCY SCORE 74

So here is my case:

SETUP:

Verizon's Westell 6100:
Modem/Router, provides 1 incoming address (provided by VZ) and provides 1 internal address (192.168.1.1).

Netgear Wireless Router WGT624 v4:
Wireless Router, accepts 192.168.1.1 and provides 10.0.0.X wired and wirelessly.

Problem:
Although Verizon's Router indicates that it is on Bridge mode, the damn thing isnt. I thought the main concept of bridging was to become practically invisible and automatically reroute all traffic to the next device, which is what I want.
I want to ultimately use the Netgear device to set all my rules and settings, instead, I have to do it on both.
For instance, Xbox Live is not working 100% properly. I can only play video games without being able to join specific games, or perform any in-game video/voice chat.

I have tried NATing the device. No luck.
I have also tried setting the Netgear device as a Wireless Base Station. Either way, I just would like to have my network ignore 1 device, and have the second one invisibly reroute all the access.

Is that possible? Could you please help?

Thanks to all!
 

A:Netgear Wireless Router and Westell Modem + Router = Routed Bridge failure

Well, since the "modem" is supplying a private IP address, it's obvious that it's not in bridge mode, that can only happen with a NAT layer, aka a router.

Try this solution to configure it for bridge mode, direct from Verizon: http://www22.verizon.com/residentialhelp/highspeed/networking/setup/questionsthree/123756.htm
 

Read other 3 answers
RELEVANCY SCORE 74

I have Qwest/CenturyLink DSL, and recently replaced the Actiontec M1000 modem which crapped out after 5 years of service. Replaced it with a Netgear DM111PSP v2 router/modem. Now I cannot get either of my two routers, the Linksys WRT54G or WRT160N V2 to broadcast wireless internet. I've spent the most time on the WRT160N. It will broadcast a wireless signal, but devices that attempt to connect to the internet time out while "obtaining IP address". BTW, I just happen to have two wireless routers on hand, I only need one to work.

I can get internet through the hard wire connection. I have the Netgear modem hooked up to the "internet" port of the WRT160N router, and the computer is connected to one of the four ethernet ports on the back of the router. I can access both router and modem setup pages using this setup. The Netgear modem is set up for DHCP server, PPPoA encapsulation, and gets its DNS address dynamically from the ISP. The WRT160N is also set up for automatic DHCP configuration. These are the settings given by running each set up wizard, and this has set me up for some DHCP conflicts.

I think that setting up a dual modem/router in transparent bridging mode (PPPoE) in theory turns off the DHCP, allowing the WRT160N to handle DHCP, but I have no luck even getting my hard-wired internet connection to work if I switch from PPPoA to PPPoE mode. Even if I cut the WRT160N out of the loop and connect the computer direct to the DM111PSP. No internet,... Read more

A:Connecting WRT160N v2 wireless router to Netgear DM111PSP router/modem

Netgear DM111PSP v2 router/modem.Click to expand...

ifthis is a router then you need to connect the other two routers using their LAN inputs NOT the WAN/internet - unless you set the DM111PSP to bridge mode
you may have already covered the below - but check
see here
------------------------------------------------------------------------

Connecting two (or more) SOHO broadband routers together

Connecting two (or more) SOHO broadband routers together
From a John Will Post

http://library.techguy.org/wiki/Connecting_two_SOHO_broadband_routers_together

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

C... Read more

Read other 1 answers
RELEVANCY SCORE 74

So I have AT&T DSL. I bought a Netgear N300 ADSL2+ Modem/WiFi Router that is compatible with my service.

Previously with this Modem/Router it would constantly drop the wireless connection for the Wii I have that was used to stream Netflix.

So recently I bought a Linksys E2500 Router so I could be able to use the Wii, along with 3 other desktops, 1 laptop, and 3 phones.

My ideal setup would be this:
Set the ADSL2+ Modem/Router to be just a modem (I know how to set the option for this)​Connect the Linksys Router to be what all the devices connect to wirelessly (this would serve as the DHCP server) ​
I have read that one of the Routers has to be set to "BRIDGED" mode, yet I don't know which device has to be Bridged

--
 

A:Solved: Netgear N300 ADSL2+ Router/Modem and Linksys E2500 Router Setup

Set the ADSL2+ Modem/Router to be just a modem (I know how to set the option for this)Click to expand...

this is being set into bridge mode - by changing to a modem

then connect the modem to the WAN on the router and you should be good to go

Do you have a wireless laptop that you can you can put next to the wii - would be useful to see the quality of the wireless signal and how many other wireless are there which may cause interference

put xirrus onto the laptop and put the laptop next to the wii and post a xirrus screen shot
------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install t... Read more

Read other 3 answers
RELEVANCY SCORE 74

Hi everyone.

I work as a tech consultant, and I am stumped on this one.

I am working at a clients house. She has purchased DSL sevice though a hole-in-the-wall company called superpa.net.

They have given me particular parameters to make the computer connect to their POS system.

Set IP Address: 192.168.1.3
Set Default Gateway: 192.168.1.1
Subnet Mask: 255.255.255.0
Preferred DNS Server: 63.169.216.98 alternate 204.117.214.10
Well that is all fine a good and the computer connects just great. But my client just bought a new laptop and wants wireless. Wireless is simple, well it should be.

I got her a basic Linksys Wireless-G WRT54G Router. Nothing Fancy.

Now obviously, the router must use the same setting as the computer. So I went in to the Config, and made it a static ip with all of the listed above. I changed the computer back to the auto obtain ip address and dns server, but I HAVE NOTHING!

The modem shows a conncetion to the router, and her computer shows a connection the router, but there is NO activity between the modem and router. No activity=No Internet
I called Linksys, they told me to contact my ISP, then called Superpa.net, they said they dont do any support for wireless, only for one hardlined computer. They would sent someone out to fix it $200/service call + $60/hour... I said forget it.

Anyone with any suggestions or solutions... I would be much abliged!!!!

Thanks,
Chris
 

A:Router DSL modem connection problems

I trust that you power cycled the modem when switching from computer to router.

If the Linksys LAN defaults to 192.168.1.x, change it to 192.168.0.x.

EDIT: and clone the computer's MAC address to the router.
 

Read other 3 answers
RELEVANCY SCORE 73.2

Hi everyone

This is my first post to the forum and by looking at some of the information available on the site - this is the place to be!!

I have just purchased this router to update my old ADSL usb modem following an upgrade to Windows Vista.

Although I have the router working in most aspects, there is one area where which I find confusing. I cannot seem to find a way of connecting automatically to the Internet.

At present I open Internet Explorer, type in 192.168.2.1 and connect from the set up screen.

Can anyone tell me if there is a method of making this connection set on computer start up?

Although I have been a PC user for some years, my experience on the networking side is very limited and is quite new territory for me.

Hope you can help.

Kevin Evans
Downham Market
Norfolk
 

A:Belkin 54G ADSL Modem Router

The connection has got nothing to do with the computer starting up at all. Your computer is always connected to the router and that's all your conmputer has to know. It's the router's problem how to connect to the internet.

You should have a "connect on demand" or "auto connect" setting somewhere in the router setup. This tells the router to keep the connection alive no matter if a computer is turned on or not.
 

Read other 2 answers
RELEVANCY SCORE 73.2

Hi all,

Hopefully this is the right place to ask, I don't visit the networking section much as it is by no means my strong point.

I currently have an old Netgear DG834GSP modem/router which was supplied by Virgin Media many years ago, It's firmware is locked and can not be updated. This router is getting very old and outdated and I am looking for a bit of an update in the area.

I am not looking at spending lots on a brand new router if it isn't necessary. Its only for home use with a number of devices connecting to it, mostly wireless (2 desktops, 2 laptops, XBox 360, Wii, couple of mobile phones etc).

I heard the Netwgear DGN2000 is supposed to be a decent unit but that is 3 years old now (still newer than the one I have haha).

Anyone have any thoughts and/or recommendations?

Thanks in advance.
 

A:ADSL 2+ Modem / Router suggestions (UK)

Read other 15 answers
RELEVANCY SCORE 73.2

adsl modem/wireless router connection to laptop
need advice on connections --line to modem/wireless router and then for normal 'phone connection .

will be able to get adsl broad band in a week or two and thus seeking advice on what to buy and how to wire/connect etc.
 

A:Adsl/modem/wireless Router

The ISP usually provides you with a modem, they will also supply the line filters required to use phones on the same line.
 

Read other 1 answers
RELEVANCY SCORE 73.2

I have recently been getting a lot of trouble...i.e. I keep having to disconnect modem and reset before I can get on line.....It seem that this problem has only been in the last few weeks. Do you thin k I
need a new modem ? or is this normal ? is there a better modem on the market which is more reliable ?

Thankyou
 

A:Belink adsl modem/router

Read other 7 answers
RELEVANCY SCORE 73.2

> I am using my ADSL Modem via two LAN cables to both computers. I am not using the wireless function. I am concerned that the people next door to me can use my internet via their wireless laptop.

I had problems logging into my control panel as the password did not work, so Belkin gave me instructions on how to reset the modem and to re-configure it online.

As I had installation problems before, I cannot afford to lose connection to the internet while trying to re-configure, so instead I have moved the two arials on the back of the router to the horizontal position and covered them with silver foil. Will this shielding work?

Thank you
 

A:ADSL Modem/Router question

Probably not. Why is it so critical that you don't disconnect for 30 seconds? What happens if you have a power failure?

I'd just go into the router's configuration and disable the wireless capability.
 

Read other 1 answers
RELEVANCY SCORE 73.2

How can I connect my USB ADSL modem to a router which has only a RJ45 ethernet port?
 

A:USB ADSL Modem and RJ45 Router

You can't.
 

Read other 3 answers
RELEVANCY SCORE 73.2

I have just purchased a D-Link-855 N Router and a DAP-1522 Wireless Bridge. I currently have a Netopia router as supplied by my ISP (Eircom Dublin).
The D-Link router has 4 LAN ports and 1 (Internet) WAN port. What is the best solution to connect the ADSL Router to the D-Link Router, LAN to LAN or LAN to WAN? Also which Router requires the DHCP to be set to on, the Netopia or the D-Link?
I plan to have the DAP-1522 connecting to the DIR-855 on the 5.0ghz WiFi network and the computers connected to the LAN ports on the DIR. I also have a WiFi IP Camera, but this cam be connected to either the Netopia or the DIR-855.
What would be the optimum way to set up my network.
 

A:Connecting My New Router to my old ADSL Modem

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).

For reference, here's a link to a Typical example config using a Netgear router
 

Read other 3 answers
RELEVANCY SCORE 73.2

hi all

i have a BT voyager modem which is USB only and a belkin wireless Cable/DSL Gateway Router which is RJ45 how can i get round this without getting another modem?

thx in advance

lee_1133
 

A:USB modem, RJ45 ADSL router! HELP!!!!!!

Read other 7 answers
RELEVANCY SCORE 73.2

I've finally got round to replacing my USB modem with a dynamode r-adsl-c4w-g wireless router/modem. I can connect to the router. to set the settings, I've confirmed the supposed settings with my ISP (tiscali) but the thing still won't connect to the internet. I've reset my ISP settings and they are correct as I've rechecked using my old USB modem and I can still connect. But at present it seems to be a waste of money if I cant get the thing to connect to the internet.

Any ideas as to what I can do to make the yellow WAN light start to glow? According to the pitiful manual that came with it, it its currently suggesting that the DSLline isn't connected, but it is.ADSL filter inplace and everything! When I view 192.168.1.1 I get green blobs against the modem that turn red if I unplug the modem. Are these misleading?

Any ideas most welcome!!

Ta
 

A:New adsl wireless router/modem help

Read other 13 answers
RELEVANCY SCORE 73.2

Hi, I have a Etec ADSL 4 port modem router. Sometimes, web pages will not load and I have to restart my computer for them to load. This doesnt happen all the time, but I was wondering if there was a router setting i could change in order to fix this.
 

A:Etec ADSL modem router

Why don't you reset the router instead? Just pull the mains adapter-cable from the router and reinsert it after a few seconds. The router will re-initialise and should be working fine again.
Some routers get 'clogged up' after a while. Mine does the same (Billion BipAc 640AE).
There are no settings to overcome that, as I found out.
 

Read other 2 answers
RELEVANCY SCORE 73.2

Hi all,

I am new to the site, I have tried searching around for some help for my problem but haven't found anything specific, so I thought I would register and start a new thread

I am fairly computer literate, I have set up some basic home networks, done port-forwarding, some video streaming and am a flash programmer but I am not in any way advanced at networking.

Here is my deal. I am house sitting for a friend. He has ADSL broadband with ukonline. He has a voyager 105 modem that he connects directly to his PC. I want to expand the network for use by multiple PCs. I want to know if I buy a wireless router, am I going to be able to expand the network or is there a chance that the ISP will make this a nightmare? Has anyonelse encountered a similar issue?

Thanks a lot

Sam
 

A:ADSL Modem, I want to add a wireless router

Read other 16 answers
RELEVANCY SCORE 73.2

I have a D-Link router with a Bellsouth Westel modem in Bridged mode. It will work for some time and eventually I loose my network. I've been through the ringer with BellSouth and D-link tech support. It's as though the modem won't stay bridged. D-link had me set the router to enable DHCP as well as leave the modem unbridged. I know that eventually, they will conflict and I will lose my connection. Please help
 

A:D-link router and dsl modem connection problems

Try another router
 

Read other 1 answers
RELEVANCY SCORE 73.2

I can connect to internet only with land line I cannot get my wireless to connect, It wants to connect then drops right away, What am I doing wrong?

A:connection problems belkin router att modem

Log into your Router setup and see if you are using the B or G or N settings. If using N, try G. If your using automatic, try B/G setting. etc. Reset the WPA-2 password.

Read other 2 answers
RELEVANCY SCORE 73.2

I'm having problems with my internet connection and modem/router. It's an Actiontec gt704wg, which serves as both a modem and wireless router. One computer is connected directly to the router and 2 others use wireless. The connection just randomly cuts off, the internet light goes blank, the dsl light flashes, and then it takes about 15-25 seconds to reconnect. I get tons of static on my phones, and the frequency of disconnecting goes up whenever i get/make a phone call. In addition, when I connect the other computers wirelessly, i get tremendous delays and more disconnections, and it takes several minutes to reconnect. The router's not old, about a year, and I've had no problems with it until recently. I've changed all my dsl phone filters, so I know it's not that. Can anyone help me?
 

A:internet connection, Router/modem problems

It sounds to me like something wrong with the router or, less likely, wireless interference. Looking at the second one first, do you detect any other wireless networks on your same or close to your channel? Any 2.4Ghz cordless phone?

Next I suggest looking for a firmware update for the router. And my final (at least for now) suggestion is to reset the router to factory default settings and reconfigure.
 

Read other 1 answers
RELEVANCY SCORE 72.4

hello all ... i have just today purchased the above modem/router .. probelem is i just cant get it working or recognised by my PC ... even odder was that when i checked my network connections there is no Local Area Connection listed there

In order to connect the modem/router the instructions say to open internet explorer and go to 192.168.2.1 and follow the intructions on screen, but i cant do this as it simply tries to open my old ADSL Connection and get on the internet that way -which icant as it is disconnected due to the new one being plugged in - whereas it should just automatically go to the welcome page for the installation of this modem. I did try on my laptop and initially it found the unsecure connection but then didnt again after that when i tried to set it up primarily on my laptop ... it just kept losing the connection and finding otehr secured connections in the area.

I am at my wits end with this one ... I have no idea what has happened to my ethernet controller on PC(it's not there in my network connections) and it's just not recognising the Belkin modem no matter what i do. Can anyone give me some pointers as to what i need to do? Any help would be much obliged ... and if any more info needed then dont hesitate to ask....

gingermark
 

A:Belkin ADSL Modem with Wireless G Router

Read other 13 answers
RELEVANCY SCORE 72.4

Hi guys, i have many devices in my home that can use the internet wirelessly, so i wanted to buy a wirless router. But the problem is that all of the wireless routers that i have seen require you to insert your modem via Ethernet cable. And my modem only has one intergrated USB cable coming out of it, so there is no way of putting it in. i have a speedtouch 330 adsl usb modem and im recieving free broadband from Orange (they give free broadband to their mobile phone subscribers who have stayed with them for a long time). anyway, i was wondering if anyone on these forums could help me. is it possible to connect a USB modem to a wireless router? and if no, do you think if i phone up orange they will replace my USB modem for ethernet one?

Thankyou in advance, and help would be much appreciated
 

A:Connecting a USB only adsl modem to a wireless router - is it possible?

Read other 10 answers