Over 1 million tech questions and answers.

How to get driver Video Card Lenovo G470 with support Direct3D ?

Q: How to get driver Video Card Lenovo G470 with support Direct3D ?

Please need help,

I can't found newest driver video card Lenovo G470 for Windows 7 Profesional 32bit

RELEVANCY SCORE 200
Preferred Solution: How to get driver Video Card Lenovo G470 with support Direct3D ?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: How to get driver Video Card Lenovo G470 with support Direct3D ?

You should be able to get updates from Lenovo support (Link below). In the Category drop-down select Video. In the Operating System drop-down select Windows 7. Choose the correct driver download for your video hardware.

Drivers and software - Lenovo G470 Notebook

Also, there's numerous other updates for your PC. You should browse the list.

Read other 1 answers
RELEVANCY SCORE 94.8

Hello guys, I try to be detailed as possible in this problem. While watching a H264 MKV AAC video using mpv using this parameters:mpv --vo=opengl-hq:lscale=lanczos3:cscale=lanczos3:dither-depth=auto my computer suddenly blue screen with this dump. [download here : http://1drv.ms/1ujkdR4], summary detail of BSOD(Nirsoft BlueScreenView): -- SOF OF BSOD --A problem has been detected and Windows has been shut down to prevent damageto your computer. The problem seems to be caused by the following file: atikmpag.sysSYSTEM_THREAD_EXCEPTION_NOT_HANDLED If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, followthese steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturerfor any Windows updates you might need.If problems continue, disable or remove any newly installed hardwareor software. Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components, restartyour computer, press F8 to select Advanced Startup Options, and thenselect Safe Mode. Technical Information:*** STOP: 0x1000007e (0xffffffffc0000005, 0x000000000000ff00, 0xfffff880031af8d8, 0xfffff880031af130)*** atikmpag.sys - Address 0xfffff88004011b1a base at 0xfffff88004000000 DateStamp 0x4ff4eb9e--EOF OF BSOD -- After my unit restarts, the drivers is gone and display "Standa... Read more

A:[Help] Lenovo G470 video card problem.

Adding property (based on details):Hardware Ids:PCI\VEN_1002&DEV_0000&SUBSYS_397517AA&REV_00PCI\VEN_1002&DEV_0000&SUBSYS_397517AAPCI\VEN_1002&DEV_0000&CC_030000PCI\VEN_1002&DEV_0000&CC_0300Driver node strong name:display.inftd.Mfg.NTamd64:vga:6.1.7600.16385ci\cc_0300

Read other 9 answers
RELEVANCY SCORE 71.6

I know there are many other people having this same problem...

I just recently upgraded Windows 7 Ultimate from Vista Home premium. When I "upgraded" though I chose to completly reinstall my OS.

Anyways I used to have transparency, but when I try to get that same effect it says

"The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."

and then when I try to troubleshoot it says "Video card driver doesn't support Aero effects" . I've tried the "Fix it" options, but that doesnt work.

I just don't see how transperancy would work on vista but not with windows 7... do I seriously have to purchase a new video card?

A:Video card driver doesn't support Aero effects

Have you installed the latest motherboard drivers and video card drivers?

Read other 9 answers
RELEVANCY SCORE 71.6

I got this error after i used the troubleshooter in my laptop. I was surprised to find my screensaver not working with the message "the screensaver can't run because it requires a newer video card or one thats compatible with Direct3D". This error happened recently after I reinstalled my Windows 7 Home Premium OS into my laptop. Before this it was fine.

Here are my laptop specs:
Acer Aspire 4745G
Windows 7 Home Premium 64-bit SP1
4GB DDR3 RAM
512MB ATI Mobility Radeon HD 5470

I'm at a loss because I installed the latest ATI Catalyst Suite then it happened. I read other threads quite similar to this before but I can't seem to solve it on my own, especially when I'm not good with computers and stuff. Therefore, any help would be much appreciated.

A:Video card driver doesn't support Aero effects

The 5470 drivers should support Aero. Don't know why youre getting that error but you need to visit Acer and get your drivers for your video card there.

Check here Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 4745G and get the first AMD VGA driver - 8.84.7.4

You also might want to check this info for Aero - What is the Aero desktop experience?

Read other 9 answers
RELEVANCY SCORE 71.6

Aero isn't working and when Troubleshooting didn't work it told me "Video card driver doesn't support Aero effects". I tried using the Aero Activator and that didn't work either. I have a EVGA GeForce GTX 650 graphics card. Please help. Thank you.

A:Video card driver doesn't support Aero effects

Please go to device manager and click on display adapters and tell me what it says.

The way you get there
(Right click "Computer" icon than click "manage" On the left side choose "device manager" than click "display adapters")

It will show me what drivers you got.

Read other 9 answers
RELEVANCY SCORE 71.6

hi everyone, i got some problem with my windows 7 ultimate 7600 . .

when I choose themes aero, why it's just changing the wallpaper, toolbars and other effects do not change??

it say ; problem found "Video card driver doesn't support Aero effects"

The current video card driver isn't compatible with the Windows Display Driver Model (WDDM)??

when i used windows vista it works well but in 7600 version it doesnt work.

my graphic card is sis mirage3+ (sis m672)

how to solve this problem??

thx a lot. .

A:Video card driver doesn't support Aero effects

to enable aero to work properly ,the graphic card needs at least direct x 9 or higher, you're card unfotunately does not support that mode ,is the graphics onboard or in a slot? maybe advisable to invest in a newer card

Read other 4 answers
RELEVANCY SCORE 71.6

Every time i try to run the Call of Duty 4 Demo it says this:

Error during Initialization:
Video Card or Driver doesn't support separate alpha blend, glow will be disabled.


I am using a Toshiba Laptop with NVIDEI GeForce FX Go5700 with 128MBVRAM. Any help is appreciated.

Read other answers
RELEVANCY SCORE 70.8

i tried running call of duty-Modern Warfare 2 and when i started it said this:
execing ragdoll.cfg from fastfile
----- Client Initialization -----
----- Client Initialization Complete -----
Attempting 22 kHz 16 bit [Windows default] sound
----- R_Init -----
Getting Direct3D 9 interface...
Pixel shader version is 2.0
Vertex shader version is 0.0
Video card or driver doesn't accelerate transform and lighting.
Video card or driver doesn't support UBYTE4N vertex data.
Huffman Took 69 Milliseconds
Error during initialization:
Video card or driver doesn't support UBYTE4N vertex data.


i was wondering if anyone could help me???
 

A:Video card or driver doesn't support UBYTE4N vertex data.

Hi and welcome to TSG.

If it is a desktop computer, you most likely need a newer and more powerful video controller card. If it is a laptop, you most likely need a new laptop.

Updating the video drivers may not help if the video hardware is old.
 

Read other 3 answers
RELEVANCY SCORE 70.8

I am trying to play Call Of Duty World at War and I am getting an error:
Video card or driver doesn't support UBYTE4N vertex data. Here is my info- any ideas?
------------------
System Information
------------------
Time of this report: 10/23/2009, 15:52:44
Machine name: TYLERS-COMPUTER
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.090206-1239)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: OptiPlex GX520
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A05
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1014MB RAM
Page File: 567MB used, 1877MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: Intel(R) 82945G Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82945G Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VE... Read more

A:Video card or driver doesn't support UBYTE4N vertex data

You have a DELL machine... which uses bad integrated video cards. It's probably not good enough.

go to http://cyri.systemrequirementslab.com/srtest/ and see if you your machine can run it. The game is in the drop down menu.
 

Read other 2 answers
RELEVANCY SCORE 70.8

can u plz help me?
My modern warfare 2 wont work
i have a Windows Vista Hp Pavillion dv6500

it keeps saying Video card or driver doesn't support UBYTE4N
 

Read other answers
RELEVANCY SCORE 70.8

Hello guys, I have a problem. I tried playing Call of Duty: Modern Warfare 3 but every time I try launching the game this error shows up:
"Error during initialization:
Video card or driver doesn't support UBYTE4N vertex data."

I have an really old laptop but I hope that you can help me fixing it.
Please help and thank you for the support
Here are my specs:

------------------
System Information
------------------
Time of this report: 3/2/2017, 22:01:05
Machine name: MARZENA-HP
Operating System: Windows XP Home Edition (5.1, Build 2600) Dodatek Service Pack 3 (2600.xpsp_sp3_qfe.130704-0421)
Language: Polish (Regional Setting: Polish)
System Manufacturer: Hewlett-Packard
System Model: HP Compaq nx6310 (EY501ES#AKD)
BIOS: KBC Version 58.12
Processor: Genuine Intel(R) CPU T2050 @ 1.60GHz (2 CPUs)
Memory: 3064MB RAM
Page File: 1324MB used, 3622MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: The file btaudio.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 3: The file btaudio.sys is not digitally signed, which means that it has not bee... Read more

Read other answers
RELEVANCY SCORE 70.8

------------------
System Information
------------------
Time of this report: 12/9/2012, 18:00:58
Machine name: SERVER
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_gdr.120830-0334)
Language: English (Regional Setting: English)
System Manufacturer: INTEL_
System Model: D945GCR_
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz (2 CPUs), ~1.6GHz
Memory: 2048MB RAM
Available OS Memory: 2038MB RAM
Page File: 1539MB used, 2535MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) 82945G Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82945G Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2772&SUBSYS_D6068086&REV_02
Display Memory: 256 MB
Dedicated Memory: 0 MB
Shared Memory: 256 MB
Current Mode: 1280 x 768 (32 bit) (75Hz)
Monitor Name... Read more

A:video card or driver doesn't support ubyte4n vertex data

Can you help me in this issue....
 

Read other 1 answers
RELEVANCY SCORE 70.8

I got this error msg when i tried to open Call of Duty(R) - World at War(TM)

can you guys help me ?
thanks
 

A:Video card or driver doesn't support UBYTE4N vertex data

Read other 11 answers
RELEVANCY SCORE 70.8

can you help me with this?what do I need to do,to play Call of Duty warfare 2.I have a laptop,Fujitsu siemens,running windows xp...thank you in advance.
 

A:Video card or driver doesn't support UBYTE4N vertex data.

Your video card is not compatable for the game.
 

Read other 2 answers
RELEVANCY SCORE 70.8

------------------
System Information
------------------
Time of this report: 7/12/2012, 13:28:59
Machine name: ARGEE
Operating System: Windows 7 Home Basic 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120330-1504)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 02/04/10 20:21:09 Ver: 08.00.12
Processor: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz (2 CPUs), ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 2038MB RAM
Page File: 1359MB used, 2716MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) G33/G31 Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) GMA 3100
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_29C2&SUBSYS_82B01043&REV_10
Display Memory: 256 MB
Dedicated Memory: 0 MB
Shared Memory: 256 MB
Current Mod... Read more

A:Video card or driver doesn't support UBYTE4N vertex data

What are you trying to run? You need to update your video card driver or your video card won't run whatever program you are trying to run.
 

Read other 3 answers
RELEVANCY SCORE 70.8

Hi,

I am using Microsoft XP. After intsallation of Call of Duty 4, Modern Warefare, when trying to strat the game an error message appers: Video card or driver doesn't support UBYTE4N vertex data

Can you help me to resolve the problem.

Thanks!
 

A:Video card or driver doesn't support UBYTE4N vertex data

Welcome to TSG, offhand, it sounds like your card doesn't support that game. If it's a store bought computer, what's the make and model? If it's a home built machine, what's the make/model of the video card?
 

Read other 1 answers
RELEVANCY SCORE 70.8

I got this error msg when i tried to open Call of Duty(R) 4 - Modern Warfare(TM)

Please help me
 

A:Video card or driver doesn't support UBYTE4N vertex data :(

Read other 10 answers
RELEVANCY SCORE 70.8

I recently purchased a used HP 2000 Notebook and performed a fresh install of windows 7 to wipe it. I did not test Aero prior to doing a fresh install but considering it came from the factory with Windows 7 on it I figured it should be able to support Aero. Is this not the case?
This is the message that appears when I try to troubleshoot my problem with Aero.

"The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."

I tried searching for solutions via google but nothing I have tried has worked for me. So far I have tried the following:

-Troubleshooting
-Windows updates
-Updating my driver
-Restarting Device manager

A:Current video card may support Aero w/ a driver compliant w/ WDDM

Hi Welcome to Seven Forums ... You do not state which Graphics Card you have .. Also the Model Number you have given is not complete there are some letters missing .. The message you got from Windows means you should go to the Manufactures Website for the Driver ...

Read other 3 answers
RELEVANCY SCORE 70.8

I have installed COD Modern Warfare but when i start it my computer shows this error
Video card or driver doesn't support UBYTE4N vertex data.
what should i do?
 

A:Video card or driver doesn't support UBYTE4N vertex data.

Read other 7 answers
RELEVANCY SCORE 69.6

(from the DirectX Diagnostic)
The system is using the generic video driver. Please install video driver provided by the hardware manufacturer. DirectDraw test results: All tests were successful. Direct3D functionality not available. You should verify that the driver is a final version from the hardware manufacturer.


WHAT CAN I DOWNLOAD TO FIX THIS??
 

Read other answers
RELEVANCY SCORE 69.2

It says:
----- Initializing Renderer ----
----- Client Initialization Complete -----
Attempting 44 kHz 16 bit [Windows default] sound
----- R_Init -----
Getting Direct3D 9 interface...
Pixel shader version is 2.0
Vertex shader version is 0.0
Video card or driver doesn't accelerate transform and lighting.
Video card or driver doesn't support UBYTE4N vertex data.


Error during initialization:
Video card or driver doesn't support UBYTE4N vertex data.

Please help me and be as thorough as possible, thank you in advance

Read other answers
RELEVANCY SCORE 69.2

want to play cod mw2 but this stopped me PLEASE HELP
 

A:Error during initialization: Video card or driver doesn't support UBYTE4N vertex data

Read other 6 answers
RELEVANCY SCORE 69.2

I bought "Black and White 2" a few days ago which is a couple of years old and I am pretty sure it messed up my video card. At first I couldn't play the game because my monitor would turn black but the sound of the game would still be on. I then installed some download from ATI's website for my graphics card which is an ATI RADEON 9800 and the game worked for the whole night. I got up the next day and in the morning I wanted to play it so I double clicked the game's icon and as it started to load a warning box popped up saying that there was a "Fatal Error". Now, when I scroll on the internet it is very choppy and when I try playing DVDs a part of the video starts to flicker green. When I try and play another game something pops up saying something about Direct3D. My video card seems fine....i think but I have no idea what the real problem is. Thanks a lot.
 

A:Video card/Direct3d Problem -- help please!

Read other 16 answers
RELEVANCY SCORE 68.4

Was wondering if this was a result of a virus/malware as my card isn't that old and I've never had an issue with my video cards dieing before hand (don't overclock or anything.) I recently tried playing age of empires 3 and it said it needed a 64mb card and this computer has 0mbs. But after restarting it runs fine until the eventual crash in which it acts like there's no video card again.

Anywho... log...

Platform: Windows XP SP3, v.5755 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16827)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\LClock\LClock.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrotray.exe
C:\Program Files\Common Files\Pure Networks Shared\Platform\nmctxth.exe
C:\Program Files\Pure Networks\Network Magic\nmapp.exe
C:\Program Files\Microsoft IntelliType Pro\itype.exe
C:\Program Files\ATI Technologies\ATI.ACE\Core-Static\MOM.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Rogers\SelfHealing\rogersagent.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Pando Networks\Media Booster\PMB.exe
C:\Pro... Read more

Read other answers
RELEVANCY SCORE 68.4

Long story short, DxDiag reports that Direct3D is disabled because I'm using a default display driver. I've installed the newest DirectX, the correct Video Card driver, and what should be the right Monitor driver. DxDiag reports that it's using 'vga.dll' as the Main Driver. I'm including a dump of my DxDiag

Specs:
Windows XP Pro SP2
P3 550 MHZ (2 CPUs)
384 MB RAM
Trident Video Accelerator 3D Image975
KDS Xtreme Flat Monitor

Thanks in advance,
~Eric
 

A:Direct3D/Video Card/Monitor problem

Read other 8 answers
RELEVANCY SCORE 68.4

Ok..so I keep getting the "directx" message when I start the sims 2. This has happened to me countless times, and each time I have easily been able to fix this problem, except this time.

System:
Windows XP home
System Man- NVIDIA
Processor- AMD Athlon(tm) XP 2800
Memory-1024MB RAM
DirextX version: DirectX 9.0c

ATI Radeon 9550/X1050 series
Manufacturer: ATI Tech
Chip Type: ATI Radeon Graphics Processor AGP
Total Mem: 256.0MB

DirectDraw Acceleration: Enabled
Direct3D - enabled
AGP Texture - N/A

at the bottom it says 'No problems found". When I run the "Test Direct3D" it says "failure at step 7" "failure at step 8" "failure at step 9"

A couple of days ago I played the sims and it was fine, then suddenly today that message pops up. I updated my drivers a bunch of times, installed things and uninstalled things trying to fix this problem.

Anyone know any possible solutions instead of buying a new video card?? How can I tell if my video card died?
 

A:Games, directx, direct3D and video card

1. Click on Start, then Control Panel, then go to Add/Remove Programs.
2. At the top of the list you should see several ATI entries. Select the entry entitled ATI Software Uninstall Utility, and click Change/Remove.
3. You will be prompted to restart your system once the uninstall is complete.
4. Once restarted, check the Add/Remove Programs list again for any remaining ATI software or other drivers that you have tried.
5. If any ATI software is still listed, click Change/Remove on those entries to uninstall each one individually.
6. Next, please scroll through the list until you find an entry called DAO
7. Select DAO, then Click Change/Remove to uninstall this program.

1.Go to link below - Double-click on the downloaded driver file. Click Run
Use the default directory for extracting the files and press the Install button.
XP
http://ati.amd.com/support/drivers/xp/previous/radeon/radeonxip-cat77-xp.html

2. Click Next on the first install screen.
3. Click Yes to the License agreement.
4. Click the Custom button.
5. Select the driver, catalyst control center and uncheck the box for steam
# The installer will start to load the display driver first.
Next you will see the WDM Capture drivers load (for VIVO or All-In-Wonder).
The Catalyst Control Center setup will start shortly after.
A dialog box will indicate the install progress.

6.Click Finish to restart your computer.

If it still doesn't work continue below
7.Device manager=> have disk => you pick location
8... Read more

Read other 39 answers
RELEVANCY SCORE 68.4

Question:  What is the maximum resolution limit for Single Large Surface (e.g., Eyefinity display group) with Direct3D 11 on Windows 7?  How can I work around that limitation if my Eyefinity setup exceeds it?  Does Windows 8 have the same
limitation?

Background:  The following technet article summarizes a maximum resolution limit for Direct3D 10 running on Direct3D 9 hardware under Windows 7:
http://technet.microsoft.com/en-us/library/ff628224%28v=ws.10%29.aspx
Exceeding the limit forcibly deactivates various Windows 7 UI features, including Windows Aero.
I am seeing a similar (but larger) limit for Direct3D 11.  With three 4k monitors (3840x2160 resolution) arranged in a 3x1 Eyefinity group (total resolution 11520x2160), Windows Aero features become disabled and cannot be turned on.  Reducing the
three monitors to 2560x1440 resolution each (total resolution 7680x1440) restores Windows Aero features.  Returning to 3840x2160 resolution but in a Windows multi-monitor desktop configuration (no Eyefinity) likewise restores Windows Aero.  I infer
from this that there must be a limit somewhere between 7680 and 11520 total horizontal resolution for Single Large Surfaces.
I am running Windows 7 Professional 64-bit (6.1, Build 7601) with a fully DirectX 11 compliant video card (Radeon R9 295x2).  All video drivers and firmware are fully updated.  Windows Aero troubleshooter and DxDiag detect no problems even when
Windows... Read more

A:Direct3D 11 Video Card Resolution Limitation?

Hi hamlen,
Sorry that we currently do not find the related information which can meet your demand. For current situation, could you please also involve AMD to check if there's any corresponding information from them? Please let me know if there's any update. Thanks.
Best Regards,
Sophia Sun Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 15 answers
RELEVANCY SCORE 68

I'm a complete and utter noob when it comes to computers, so please bear with me. Plus, this is a bit of a long story, so I apologise in advance, but I really don't have a clue what's happening with this computer...

So I'll start from the start:

I just downloaded Project64 onto my computer again because my hard-drive recently blew up or something, (manufacturer's fault, or so I'm told) and so I've had to start all over again loading my programs onto this new one.

Anyway, Project64 (emulation software I use to play old Nintendo 64 games on, though you probably all know that already, I'm not sure) used to work fine with my old hard drive, but for some reason when I open it up now it comes up with this Error message that reads:

'Direct3D failed to initialize
Error code: 8876086A
D3DERR_NOTAVAILABLE'

So I click OK, and then this pops up:

'The default or selected video plugin is missing or invalid.

You need to go into Settings and select a video (graphics) plugin.
Check that you have at least one compatible plugin file in your plugin folder.'

So then I click OK again, and it takes me into Project64's Settings, and I'm quite convinced at this point in time that the problem's not with the video plugins at all, because I do have compatible ones and they should work. (I'm using Jabo's Direct3D8 1.6 as a video graphics plugin and that used to work on this same computer).

... Read more

A:Please help - Video Driver problem, Direct3D Acceleration 'Not Available', Project64

To identify which nVidia graphics solution you may have. please download GPUZ and run it.

If the card is also a year old any of the current nVidia's WHQL drivers should be work to start with. Please go to nVidia's site; download the drivers, and install them. Then see what happens, although it should help alleviate your issue.
 

Read other 5 answers
RELEVANCY SCORE 67.6

Hello I need help fixing the ability to enable Direct3D on my system, or help with a video card upgrade. My pc will not even run screen savers and the only game i'm able to play is peggle! I can play videos on it, but the quality is terrible and the display driver will only allow me to run at 1024 x 768
There seems to be much debate on the best compatible graphics card for the dell optiplex 760 MT. I am trying to install the BEST card that will be supported by stock components. I do not wish to upgrade the PSU or MOBO or CPU. I just need to know which card is going to give me the best power without any other changes.
----------------------------------------------------------------------------------------------
I have:
Case: Dell Optiplex 760 MT (mini-tower/ Large form factor)
CPU: Intel Core 2 Duo E7400 @ 2.8Ghz
Motherboard : [Dell : 0M858N] Intel 4 Series
RAM: 8GB (4x2GB)
PSU: 305W
Video Card: ATi Radeon 9200
OS: Windows 7 Proffessional sp1 64bit
-----------------------------------------------------------------------------------------------
I bought an EVGA GTX 750Ti 2GB GDDR5 (superclocked), and unfortunately it DOES NOT FIT. The only PCI slot it could be plugged into is the top slot. The card would face upward, and the bracket is a double, so it will not fit at the top slot. Is there a way to order a single slot pci bracket, because it would fit if it were single.

A lot of people have suggested the HD7750, but most of those are twice as expensive, but half as good as ... Read more

A:Optiplex 760 MT ( direct3D will not work / video card upgrade)

Radeon 9200 is going backwards.  You must have at LEAST 128 megs of VIDEO ram and the 9200 has 32 megs of VIDEO ram.

ASUS EAH6450 fits in ALL Models All Sizes EXCEPT USFF.
 
 

 ASUS Silent cards fit in all models with X16 video slot. Meaning it doesnt fit USFF because USFF has Zero Slots. These cards fit and work in every dell I have ever tried.

 
http://www.newegg.com/Product/Product.aspx?Item=14-121-439
They fit into every Dell Except USFF.
Regulatory Model (Mini-Tower): DCSM
Regulatory Model (Desktop): DCNE
Regulatory Model (Small Form Factor): DCCY
Regulatory Model (Ultra Small Form Factor): DCTR
 

Read other 7 answers
RELEVANCY SCORE 67.6

The issue I am having at the moment is that I'm trying to play a game a bunch of friends of mine have started lately, it's called Runes of Magic and the system requirements aren't high so it shouldn't be too hard to run. When I start the game up Direct3D fails to initialize and that's where I'm at with that.

I have the DirectX 9.0c installed and have reinstalled it numerous times, so I'm convinced that the problem isn't there; then again I could be wrong.

I've run a dxdiag and this is the information I got, it might help some people so I'll post it here as well. That's all I can think of information wise that I can give you.

It's also attached to this post in case you feel better having a copy on your desktop.

------------------
System Information
------------------
Time of this report: 7/16/2009, 00:51:59
Machine name: YOUR-PL0BMT21N9
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
System Model: KM400-8235
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon™ XP 3000+, MMX, 3DNow, ~2.2GHz
Memory: 448MB RAM
Page File: 425MB used, 632MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: Not found
DxDiag Version:... Read more

A:Issue with Direct3D and trying to figure out video card/chipset in use.

Did you attempt to uninstall the DirectX version which seems troubled...and then reinstall DirectX?Worth reading, if not necessarily following: http://www.instant-registry-fixes.org/how-...tall-directx-9/I would suggest an attempted repair install of XP.Louis

Read other 6 answers
RELEVANCY SCORE 66

I have to try to install Red Hat 7 into a Lenovo y50 and i have some issue with the Video Card. The problem id that in graphic mode i can not reduce the resolution of the screen and i have only the 4K resolution so is impossible wotk with it. I Have Downloaded the NVIDIA driver from Nvidia site and tried to follow the installation process found in Red Hat portal (link below)but when i run the driver NVIDIA-Linux-x86_64-375.26.run seems that is not compatible.  https://access.redhat.com/solutions/1155663 I'm not a linux expert so i would like to know if there is some workaround to fix it Tanks GIO

Read other answers
RELEVANCY SCORE 63.6

Hello,

I have an OptiPlex 9010 with onboard Display Port & VGA
I am trying to hookup a new 58 inch Samsung TV which only has 2 hdmi ports and composite & component.
I need both hdmi for laptop hookups so I can't use them for the Dell 9010.
I want to run VGA to either the composite or the component.
Will the onboard VGA do this?
I have a cable like this:

A:Does my OptiPlex 9010 video card support S-Video or Composite Video out through its VGA port

Quilty-MUN,The adapter in the image should work for your purpose connecting to the TV.

Read other 1 answers
RELEVANCY SCORE 62.4

 le di matenimiento a mi laptop pero me surgio una duda en el chip de video ¿tiene que llevar pasta termica o alguna almuhadilla termica? me parece que si traia una pero no estoy seguro la pregunta es la puedo dejar asi sin nada? o debo de ponerle la almuhadilla o pasta termica, la duda es porque este equipo no tiene disipador en el chip de video solo en el procesador.

A:Particiones en lenovo G470

If there is no heatshink on the the video chip you would not apply thermal paste to it, because the thermal paste's only purpose is to more efficiently transfer heat to the heatshink.  

Read other 1 answers
RELEVANCY SCORE 62.4

Hi, recently i just found my old laptop -G470. I need a laptop to do what my pc can do , so when Im not home i can bring the laptop out. What i need is i can photo editing and video editing without any hiccups in the between. Is it possible to upgrade my G470 to what i need or I should just go buy a new laptop. Anyone can help me out here ? Just give me the best hardware that compatible with G470.Thanks in advance.

Read other answers
RELEVANCY SCORE 62.4

Bluetooth not working after installing Windows 10 on G470
 
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
                   Added Subject line to body of message.

A:G470 - Bluetooth not working after installing Windows 10 on G470

Hi ashu2000 , 
 
 
Welcome to the Community Forums.
 
Checking on the Lenovo supported systems list for Windows 10 Upgrade ,  "not listed, it hasn?t been tested for Windows 10 upgrade and is not supported. " for the G570 .
 
Same reasons why on the support site , drivers for windows 10 is not available. 
 
There are claims that it works ok but some have reported devices and apps not working after the upgrade. 
You may check related threads here . 
 
Would there be any yellow or black down arrow marks on the device manager . 
If that is the case , then you may want to try checking the hardware ID to download specific driver directly from the manufacturer if the Windows 8.1 version driver would not help.
Example for Broadcom Bluetooth 4.0 Driver or use windows updates to install appropriate drivers
 
On device manager , you may also use built in drivers in Windows 10  doing upgrade drivers and, browse on this pc , let me pick option, and choose recommended ones on the list .  
 
Hope this helps. 
 
 
Regards
 

Read other 7 answers
RELEVANCY SCORE 62

(I am only writing this because my parents refuse to listen to me and they want "Lenovo" to help me with this problem.)So I own a Lenovo G470 (Ideapad) that I bought in 2011. About 7 months ago, the laptop's hinges started to become lose and then since 4-5 months, bits and pieces of the laptop case keep falling apart/breaking around the hinges. It was a bit bothersome but nothing too serious.However, last week the laptop's screen became tilted (??) like one hinge/side is up and the other is down. It's almost diagonal. And the wire connecting to the laptop screen is exposed (i dont know how) maybe because the hinge's piece broke so the wire is exposed and it's almost on the verge of breaking too. (Ill be attaching the pics of the laptop below.)My warranty expired ages ago. But I dont mind paying for the repair. Is there a way if I contact a real Lenovo store nearby and ask them to "repair" my broken laptop. My parents would rather spend 80-140 dollars repairing this than buy me a new 700/800 dollar laptop.Honestly, if some of you wanna tell me that this laptop is beyond repair, believe me I know! My parents refuse to listen to me -_- So this is just to prove them Im right. FRONT:- https://imgur.com/4viSonH- https://imgur.com/D1pX3I0LEFT SIDE:- https://imgur.com/IKEdGI4- https://imgur.com/L6HmMPw- https://imgur.com/7qk0CMm- https://imgur.com/j5usW0nRIGHT SIDE:- https://imgur.com/wjONWoE- https://imgur.com/peerlHE- https://imgur.com/JU81ZrI- https://imgur.com/gvsWs5S- https... Read more

A:My laptop's falling apart.. Lenovo G470

If you think you have a flat tire do you keep on going until the tire disintegrates and you destroy the rim? That's what you did to your own laptop.You should've taken action as soon as you noticed something is happening with the hinge.There's not much you can do right now to fix it. Only thing I'd advise is to find a broken one online with the body intact (at least when it comes to the bottom part and hinges). e.g. with a smashed screen and make a transplant. Have it done by a professional if you can't do it on your own.

Read other 1 answers
RELEVANCY SCORE 62

hi,

it takes almost 15min to boot windows 7 32bit clean installed window.after that some time works fine but most of the time when i open or close some window, it’s open like in slow motion but task manager shows ok(cpu0to5%ram36%of2GB without any background).I have spare fully working HDD so replaced but problem is same ,even BIOS is hanging.i have tried lenovo provided tool to test system and it shows all ok. cd/rom,wifi card and hdd is tested physically.ram is tested by memory diagnostic tool only.

need help!!!

Read other answers
RELEVANCY SCORE 62

Hello! Recently I upgraded my G470 notebook into win7, and my wifi is not working, the button is turned on and I installed the driver in the lenovo support center, I also installed the Energy Magagement program and etc, but when I press Fn + F5, the only thing that appear is the Bluetooth connection, which is turned on, but my wifi does not show there, and also, it does not show in the Device Manager... What can I do?It is enable on the BIOS as well.

Read other answers
RELEVANCY SCORE 62

Hello, I have a Lenovo g470, and I was wondering if it would be possible to get an Ivy Bridge processor. The manual says the following ones are compatible: Intel I7-2620M 2.7G 4M 2c J1 PGA processor CPU.Intel I5-2540M 2.6G 3M 2c J1 PGA processor CPU.Intel I5-2520M 2.5G 3M 2c J1 PGA processor CPU.Intel I5-2410M 2.3G 3M 2c J1 PGA processor CPU.Intel I3-2310M 2.1G 3M 2c J1 PGA processor CPU. But as it Ivy Bridge are backwards compatible with SB, I wonder if I could get a 3ª processor and put in this mobo. If not, does it worth to change from i3 2310m to anyone of these above?? i5 2540m has 200mhz higher clock on gpu and i7 has more l3 cache(4MB), or should I just leave like this?? I appreciate any help. Thank you.  (Sorry for my bad english)

Read other answers
RELEVANCY SCORE 62

I encountered the BSOD with the problem about atikmpag.sys It seems like I made a wrong choice about deleting it, (solution from internet searching)  and now the Display Adapters doesn't work anymore as you can see in the pictures  after deleting the atikmpag.sys during safe mode, It somehow resolved the problem about the BSOD and my laptop are finally starting properly now the problem is about the resolution, it's not the same anymore, it's too low and somehow the screen is blurry, as you can see at the Graphics section, the maximum resolution I can only choose is 1024 x 768, which is supposed to be 1366 x 768 (HD) if i'm not mistaken,   I need your help on how to fix this I hope i can turn it back to normal., I don't have a CD installer (if it is supposed to have one) to re-install it, and about downloading from other sites I'm a little bit concerned about that so I haven't tried it yet.. and it seems like Lenovo has its own installer... Pls help ASAP













Solved!

Go to Solution.

A:Lenovo G470 atikmpag.sys problem

hi jm9327,
 
Welcome to the Lenovo Forums.
 
The G470 with a dual GPU (Intel+AMD), uses a muxless driver (this is a custom driver that switches the discrete AMD Graphics to the Intel Graphics to save power). If you have installed a different driver, this may cause system instability (including BSOD).
 
If you're running on Windows 7, try the following::
 
1. Follow this guide on how to disable automatic driver installation.
2. Install these drivers in order (reboot if necessary)
   (1st)  - Intel Onboard Graphics Driver for Windows 7 (64-bit)
   (2nd)  - AMD Video Driver for Windows 7 (32-bit, 64-bit)
 
When finished, check if the yellow exclamation marks are gone under Device Manager > Display Adapters and observe the screen resolution adjustment and BSOD occurrence.
 
 
Let me know how it goes.
 
Regards

Read other 7 answers
RELEVANCY SCORE 61.2

There's always a pop-up message that my Lenovo D: drive is almost out of space, I clicked it, cleared recycle bin, but nothing happened still, I manually checked on the drive but I'm afraid to delete these folders such as applications, drivers, etc.. please help me to resolve this... I would really appreciate your response..
 

A:How to free space on my Lenovo G470 drive D:

What is on the "Lenovo D: drive"?

Please attach a screen shot of the Disk Management window, as that sometimes helps us understand your issue. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.
 

Read other 1 answers
RELEVANCY SCORE 61.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

Read other 9 answers