Over 1 million tech questions and answers.

Multiple machines on wireless router

Q: Multiple machines on wireless router

I have 2 desk units hardwired to a belkin wireless router that is connected to comcast cable. I want to assign each machine a unique IP address so that they can each be accessed from outside via the internet. One will actually have a domain name assigned to a specific program.

How do I do this?
Thanks in advance

RELEVANCY SCORE 200
Preferred Solution: Multiple machines on wireless router

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Multiple machines on wireless router

Read other 6 answers
RELEVANCY SCORE 58.8

I have an ADSL modem with a netgear WGT624 wireless router.
Also 3 PC's with Dlink DWL-G520 wireless PCI adapters.
This all works properly and I've not had any problems with it.
I'd like to add a Dlink Dl-624S wireless router to this existing network.
It has a usb connection for an external drive that I'd like to use 24/7 on the network and the ability for other multiple wireless connections.
I'd like to use the 2nd router in a different area than where the current PC's and modem are and it is not realistic to use a cable to join the two routers, therefore the requirement for a 2nd wireless router.
I think what I'm needing to do is use the 2nd wireless router as an access point only?
Is this possible with the Dl-624S?
Any help would be much appreciated.
 

A:wireless multiple wireless router network

Read other 14 answers
RELEVANCY SCORE 57.2

I need to set up 4 wireless routers on the existing network which has 4 hubs located at different floors. These hubs will be replaced by wireless routers. The signal from each wireless routers will allow access to multiple computers on each floor. Any suggestion as to how I should set up new routers. If there is a diagram available I would appreciate if you could display or email.
 

A:Multiple wireless router setup

Read other 16 answers
RELEVANCY SCORE 56.8

Is it possible? I am running a trade show display next week and would like to set up a wireless printer for the sales staff to share. It would seem that a network router is suggested, but I don't have a lot of space or the expertise to set up a network, so would like to avoid it if possible. Does anyone have any ideas?
 

A:wireless printer for multiple users with no router?

Read other 16 answers
RELEVANCY SCORE 56.8

First off, let me apologize for mis spellings, this laptop needs a new kayboard badly.

What im doing is setting up a 2nd wireless router to extend wireless network to other half of house and Garage.

My main wireless router is a WRT54G... Nice base model, used for DNS/DHCP and my main network config.

2nd router (in diff room) is a Truemobile 2350 (Piece of junk sold to my parents by dell when they bought a laptop)

Anyways, they are both setup, and both run off different networks. main is 192.168.1.X (x being maker for each machines specific address) and the trumobile runs on 192.168.2.X...

The issue is, each will provide me Internet, but when im on the truemobile, I cannot see shared stuff on my network.

Heres a little "diagram" of how its all connected.

Gateway (actiontec DSL)--WRT54G--Cisco Catalyst(forgot wat series)----Tuemobile.

Any ideas? (This is sad since I majored as a Cisco CCNA for two years :'( )
 

A:Solved: Multiple Wireless router setup

Read other 6 answers
RELEVANCY SCORE 56.8

Hey,

I've been having a problem with connecting more then one laptop to my Linksys router. You see, when one is on and another one tries to connect to the network, it can't connect and the one that was connected is disconnected. Anyone have any idea what the problem could be?
 

A:Multiple Laptops connecting to a wireless router

I'll offer two guesses--you have the modem connected to a LAN port instead of the WAN or else have a static IP assigned to at least one of the PCs.

Assuming neither of those guesses are correct, please show the following for PC1 with a good connection, PC2 after it tries to connect, and PC1 after it gets knocked off.

Start, Run, CMD, OK to open a command prompt:
(For Vista type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 56

We've got 1 desktop and 4 laptops in the house. We have cable internet and a wireless router that all the computers connect to. Lately there have been some issues where when one laptop is connected to the Internet, another one won't connect, and vice versa. Today, the desktop and 2 of the laptops were connected, but when we tried to connect 2 of the other ones, it connected to the router but both got messages that the Internet has limited or no connection.

Is it possible that there is some sort of conflict between the computers? Or perhaps a setting in the router that needs to be changed? We're using a Linksys router with WEP enabled.

Appreciate any comments, as I can't seem to find the solution. Thanks!
 

A:Problem connecting multiple laptops to wireless router

Read other 8 answers
RELEVANCY SCORE 53.6

Hi,

Cable Modem Model: SMC8014
Linksys (Cisco) Wireless Router Model: WRT400N

Cable Modem Info:
192.168.0.1
DHCP is ON with range of 192.168.0.2-192.168.0.199

Router Info:
Auto-configuration - DHCP
DHCP routing is OFF, assigning static IP's
192.168.1.1

I've done a lot of testing, some of these scenarios may seem weird so that's why.

Questions:
1. When I turn DHCP on for the router and stop using static's, I get no conflicts between the modem and the router. But I thought with both attempting to assign IP's, that would create a conflict?

2. If I set the router's ip to 192.168.0.2, in an attempt to place it in the same subnet as the modem, then it breaks the connection between the modem and the router. One can't ping the other, I tried using each's onboard diagnositic utilities (ping). Yes (please don't ask) I did save the changes, reboot, etc etc. Am I missing something? What do I need to do to get these two guys on the same subnet and be able to communicate with each other, the internet, and the intranet?

3. On top of the above questions, I'm trying to use port forwarding on both the router and modem. I just need to know how to forward one port for one IP through the router and have it continue through the modem. I'm running a HTTP port checker to see if the port's open and it keeps coming back closed. I think this problem is related to #2 because the modem won't let me assign port fowarding schemes th... Read more

A:Solved: Multiple Questions. Cable Modem SMC8014 + Linksys Wireless WRT400N Router

Read other 9 answers
RELEVANCY SCORE 52.4

I upgraded from Windows 7 pro 64 bit to Windows 8 pro 64 bit on two computers and all went well for a day. After that I get the BSOD on both machines at least 8-10 times each day. I called the Windows help desk and was less than satisfied with their analysis skills since they did not even seem to care about looking at the DMP file even after I mentioned it several times. I zipped the dmp file in case anyone can read it. Thanks in advance.

A:BSOD on multiple machines

Welcome
I have just resolved this idential problem three times already today. You must uninstall your current anti virus and use the built in Microsoft Security Essentials/Windows Defender. Start with a restore point first, so that you can go back in the event of problems.

Read other 8 answers
RELEVANCY SCORE 52.4

Hello All,
 
Before posting I want to say that I am a long time lurker of this forum and the site in general. There has been so much useful information found on this site ver the past few years and would like to say thank you.
 
Anyways, recently I have been dealing with multiple machines showing up under AVG admin console saying that C:\windows\taskshost.exe shows up as infected. I'm assuming that something else is going on and using taskshost.exe as the local resource. I've tried running and cleaning the machines multiple times but come up with nothing. Then, I get a letter from their ISP saying that they are blacklisted because spam as been originating from their IP address. This is the quote I got from the ISP:
 
GameOver Zeus (GOZ), a peer-to-peer variant of the well-known bank credential-stealing Trojan Zeus malware, uses a decentralized network infrastructure of compromised personal computers and web servers to execute command-and-control. GOZ is primarily used by cybercriminals to harvest banking information, such as login credentials, from a victim's computer. To date, GOZ activity has led to the loss of millions of dollars through fraudulent Automated Clearing House (ACH) transactions and wire transfers. Infected systems can also be used to engage in other malicious activities, such as sending spam or participating in distributed denial-of-service (DDoS) attacks.
 

 
So, I'm assuming that the two issues are related. After redoing an invento... Read more

A:Multiple Machines Infected on LAN

Hello this will be better resolved with a repost and a DDS log from the Main machine.Please follow the instructions in THIS GUIDE starting at Step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it HERE. Please include a description of your computer issues, what you have done to resolve them, and a link to this topic.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.It would be helpful if you post a note here once you have completed the steps in the guide and have started your topic in malware removal. Good luck and be patient.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.

Read other 1 answers
RELEVANCY SCORE 52.4

Hi;
I'm new to this and this is my first question. I am trying to connect two fax machines to one dedicated fax line. Is it possible to connect a free-standing HP Laserjet 3330 and a system controlled Brother 5-in-1 MSC5440CN to one dedicated line without interfering with one another? I would like one in one office and another in another office. Does anyone know a way to do this? I would appreciate any help you may be able to offer.
Thanks,
Sandi
 

Read other answers
RELEVANCY SCORE 52

Hi everybody,

I got a problem that I just haven't been able to figure out. I have to windows XP machines and I am trying to network them through a linksys 4-port DSL/Cable Router. The One machine is a laptop the other is a desktop.

Here is the problem. On the laptop, I am able to ping the laptop IP address and the router IP address, but the desktop does not return a signal, I get a timed out error. The router sees the desktop and assigns an IP address to it. When I ping the router from the desktop it gets a signal, when I ping the laptop, it gets a signal, when it pings itself, it does not get a response. I can access the router through the web Browser from the desktop. The other strange thing is on the laptop I can see the desktop in the workgroup I assigned to the network, but I cannot access the desktop.
I tried changing ethernet cards in the desktop and I get the same behavior so I assume it is Windows. I ran ipconfig/all on the desktop and I notice that under Windows IP Configuration the node type was unknown. That struck me odd since on the laptop the node type was Peer to Peer. Does anybody have any idea whats going on? Is there some setting I am missing on the desktop? I have run the network setup wizard for a computer hooked up to a residential gateway, is that the wrong network type? Thanks for any input
 

A:Two XP machines through Router

Read other 14 answers
RELEVANCY SCORE 51.6

Have multiple machines keep having recurrence of c:\windows\system32.exe detected and removed by eset nod32. I have run various anti malware programs with assistance of nod32 support without success.I ran Process Explorer and Process Monitor and I see that \windows\PSEXECSSVC.EXE runs just before the warning dialog comes up but then the process disappears15:25:23.3607270 PSEXESVC.EXE 2520 QueryNameInformationFile C:\WINDOWS\PSEXESVC.EXE SUCCESS Name: \WINDOWS\PSEXESVC.EXE15:25:23.3618608 PSEXESVC.EXE 2520 Load Image C:\WINDOWS\PSEXESVC.EXE SUCCESS Image Base: 0x400000, Image Size: 0x1800015:25:23.3642341 PSEXESVC.EXE 2520 Load Image C:\WINDOWS\system32\ntdll.dll SUCCESS Image Base: 0x7c900000, Image Size: 0xb000015:25:23.3643202 PSEXESVC.EXE 2520 QueryNameInformationFile C:\WINDOWS\PSEXESVC.EXE SUCCESS Name: \WINDOWS\PSEXESVC.EXE15:25:23.3647962 PSEXESVC.EXE 2520 CreateFile C:\WINDOWS\Prefetch\PSEXESVC.EXE-35EFACCF.pf SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: None, AllocationSize: n/a, OpenResult: Opened15:25:23.3694481 PSEXESVC.EXE 2520 CreateFile C:\WINDOWS\Prefetch\PSEXESVC.EXE-35EFACCF.pf SUCCESS Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Complete If Oplocked, Attributes: n/a, ShareMode: Read, Allo... Read more

A:2.exe infection - multiple machines affected

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 51.6

Hi All,

Not sure this is the right spot but here goes. I have my own business, domain name, etc. I use multiple machines - laptop, workstation & handheld (iphone3GS). Is there a way to to have all my email, calender and certain directories of files, etc stay synchronized across the laptop and workstation? Also, it would be nice to have the email and calendar synch'd with the handheld as well. I used MS office 2007 on a win 7 laptop and a Win XP 64 workstation.

I currently have a pop email protocol but I believe I could switch it to IMAP (of which I know nothing) if that could help.

Any help or a link or a search criteria would be much appreciated.
Thanks,
Billmce

A:Better organized....multiple machines and email

I had more or less the same requirement, and settled on syncing.net as a solution between laptop and workstation; I sync my Nokia smartphone to the workstation using Nokia's own (pretty poor to be honest) software. Syncing.net works well for me

Read other 9 answers
RELEVANCY SCORE 51.6

Hi, i'm new here, already tried to search the site for help but can't find what i'm looking for. I have 3 computers that I have already reinstalled Xp on them. Problem is they wont validate because the disc that I used came with another computer and i'm using the product key off the computers that I was reinstalling XP on, and when I go to validate them the product keys obviously dont work because they are suppose to be used with the OS that they came with. I did not know this until it was to late. So my question is, is there a xp disc, software that I can use to put on my computers and then use the product keys that are on the case to validate. I also just bought a win7 full version, both 32 and 64 bit disc that I have put on my laptop. So could I use the Win7 disc and just buy the product keys if the the xp option doesn't work?

A:Using Single Xp OS disc on multiple machines

Welcome here.

I couldnt get you clear in your previous post.

You installed XP with the same key to 3 machines and when you went to validate, it isnt validating.You would buy a new win XP but still not willing to reinstall the XP. you are looking for a software so that you could just update the key on the already installed xp rather than installing all over again and validate. If this is what you want, give a reply, will let you know the solution.

Read other 15 answers
RELEVANCY SCORE 51.6

Hi guys

I have a classroom that we need to log in as a local admin (the exam software needs administrator privelidges to work correctly) and I was wondering if anyone could come up with a solution to save me having to go to each machine and log them in indevidually. Ideally I'd like to be able to do this all remotely.

A:Login multiple machines remotely

what about vnc? i think i remember seeing that software on the computers when i was going to school. you would still have to log into every computer but you could do it all without having to leave your computer. vnc shows whatever is on the screen of the computer that it is connected to.

Read other 3 answers
RELEVANCY SCORE 51.6

Problem: 500 XP machines, 550 Users, 20 Printers, in a building the sizes of 4 football fields. Users are on a standerd desktop, (for the most part). Roaming profiles are in use, (for the most part). Users will move from one machine to another. Using Roaming profile, you can keep thier drives mapped, however, when they print, they need to print to the closest printer.

Question, How do you get the machine to use the closest network printer with roaming profiles?

Thank you
 

Read other answers
RELEVANCY SCORE 51.6

We have multiple users in our environment that have been getting BSOD's with corrupt dump files. They all point to 0xCA_2 and they are not doing anything specific when it happens. We have full dumps enabled so it will take very long to upload/download. I have copied the results of the debugger below. If someone can give me commands to type in, I can post my findings....

Kernel Complete Dump File: Full address space is available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02a64000 PsLoadedModuleList = 0xfffff800`02ca9670
Debug session time: Mon May 21 09:15:05.809 2012 (UTC - 4:00)
System Uptime: 2 days 23:48:27.005
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
....................................
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

A:BSOD 0xCA_2 on multiple machines

Sorry, forgot to add that this is on X64 Enterprise on Lenovo T410S

Read other 2 answers
RELEVANCY SCORE 51.6

Hey there

I have an ADSL connection, with a wireless router attached. Then have two laptops both connected via the wireless connection. When they are both being used, they usually cause an IP conflict causing one to drop the connection. I beleive this is because my connection has dynamic IP and both machines are trying to connect directly.

One laptop is my work machine and the other is my wifes home machine. Neither machine is on all the time so I havent tried setting up the internet connection sharing.

Any suggestions on how to set this up? I am thinking of using an old PC box as an always on directly connected to the ADSL line and then sharing the connection through there. If that is an option, what kind of specs should it have? Or is there an easier way?

Thanks!!!
Lon
 

A:Dynamic IP, multiple machines causes IP conflicts

Read other 6 answers
RELEVANCY SCORE 51.6

Hi - We are finding multiple machines (setup identically) with BSOD appearing at different sites, whilst running out own application, need some help with interpreting the dump files which are attached, if anyone can point us in the right direction?

Tried using different brand machines but same error occurs, though this is limited to W7, XP did not suffer this issue.

Thanks again for your help - Sam

A:Regular BSOD on Multiple Machines

Code:
BugCheck 44, {fffffa80035d6010, 1d7b, 0, 0}

Probably caused by : srv2.sys ( srv2!Smb2FreeResponseBufferForAsyncCall+1c )

Code:
Usual causes: Device driver(s)
Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:Driver Verifier - Enable and Disable


   Information
Additional Help - Using Driver Verifier to identify issues with Drivers

Scan for any missing, modified or corrupted protected Windows files with:SFC /SCANNOW Command - System File Checker
Remove:


Code:
Start Menu\Programs\Symantec
Start Menu\Programs\Symantec\Symantec pcAnywhere
Symantec software is known to cause BSODs, Windows has it's own native Remote Desktop Connection available here:Remote Desktop Connection (RDC) - Network
Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.

Read other 1 answers
RELEVANCY SCORE 51.6

Hi everyone,
 
Got some irritating errors here happening across multiple machines in the same manner. Errors are not restricted to any particular software but feature heavily on Thunderbird, Word and Excel.
 
Example 1

Faulting application name: thunderbird.exe, version: 38.1.0.5666, time stamp: 0x559c1ed7
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x289ff838
Faulting process id: 0x1938
Faulting application start time: 0x01d0cfc06bb9ae4b
Faulting application path: C:\Program Files (x86)\Mozilla Thunderbird\thunderbird.exe
Faulting module path: unknown
Report Id: a7c398f2-3bce-11e5-b879-00249b03bd8a
Example 2

Faulting application name: WINWORD.EXE, version: 12.0.6726.5000, time stamp: 0x559b6b88
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0ccafac2
Faulting process id: 0x1a14
Faulting application start time: 0x01d0d3aed60ff35e
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\WINWORD.EXE
Faulting module path: unknown
Report Id: 99c794f3-3fa2-11e5-bd22-00249b03bd8a
Related error, example 3

Faulting application name: WINWORD.EXE, version: 12.0.6726.5000, time stamp: 0x559b6b88
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000096
Fault offset: 0x0b51fbfe
Faulting process id: 0x1bbc
Faulting application start time: 0x01d0bf7daf105693
Faulting application path:... Read more

A:Irritating errors, multiple machines.

Well, I can tell you that 0x5 error codes are "Access denied", which means that the process encountered an error due to not having enough permission on a certain task and it crashed. Does it happens across multiple userprofiles, or just one?

Read other 8 answers
RELEVANCY SCORE 51.6

Hello all.
I have been thinking of how can I make MBSA scan reports for multiple machines.

As of now I've been looking report from GUI only, but it is too much time taking when you have to make a summary of missing updates of around 200 computers at a stretch.

Can someone throw some light on mbsacli options to generate reports for remote scanning from a server. I read that detailed report cannot be generated using
mbsacli for multiple machines scan. If anyone can provide a command for generating report (incuding all the details available in GUI) for a single host, I can create a batch script to do the rest.
P.S.- I am using MBSA for remote bulk scans, not local scans.

Thanks,
Kriss

Read other answers
RELEVANCY SCORE 51.6

I've got two Win 7 machines that don't have working online Help and Support.
One is my signature machine with Win 7 Pro 32-bit, the other is Win 7 Home 64 bit.
The 32-bit machine is updated monthly. The 64-bit machine hasn't been updated since before Win 10 was released.
Both machines are connected to a common Linksys router to my DSL ISP.
When switched to Offline Help, I get results. Online help, nada.
I did search this problem here on Seven Forums and at Google, but no solution was ever found.
The fact that it's TWO rigs affected is making me wonder if Microsoft has shut down online help for 7.
No viruses, no malware, sfc /scannow was run on both machines with no errors found.

Does anyone have any ideas what's going on? I'd appreciate any input.

A:No online Help or Support on multiple Win 7 machines

Yes on line support has finished. It finished in Jan 2015. This PC magazine article will explain it for you.

Mainstream Windows 7 Support Ends Today, But Don't Panic - Operating Systems and Platforms - Reviews and Price Comparisons from PC Magazine

Read other 1 answers
RELEVANCY SCORE 51.6

Hello.

Looks like we are going to roll out W7 on multiple machines. We have approx. 38 identical machines (XP) we want to install this too. I know we need to back up the data then do a "Custom" install, and reinstall the programs, but has anyone used anything that will speed up the process (SUS, Ghost, etc).
Oh, and would it be best to roll these out prior to our W2008R2 roll out, at the same time or W2008R2 first?

Thanks for any and all suggestions.

SMC

A:Install On multiple Machines at the same time

HK

have you tested win 7 extensively in your environment. Networking, sharing, compatibilty with core apps?

For 38 machines its really not that bad. You can create images (ghost or acronis) you can also slipstream the upgrades and make it unattended. that number of machines can be done easily over the weekend with a little help.

Let me know if I can help, or if you have questions

Ken

Read other 7 answers
RELEVANCY SCORE 51.6

i bought windows 7 for my laptop and my mom has a dektop running windows vista i wanna know is it possible for me to use my windows seven disk on more than one computer useing the activation code and everything when it asks for my activation code will it not let me install windows 7 on her computer because i have already used the activation code when i installed it on my personal laptop pc. Thanks

A:can you install windows 7 on multiple machines

  
Quote: Originally Posted by bigboi972


i bought windows 7 for my laptop and my mom has a dektop running windows vista i wanna know is it possible for me to use my windows seven disk on more than one computer useing the activation code and everything when it asks for my activation code will it not let me install windows 7 on her computer because i have already used the activation code when i installed it on my personal laptop pc. Thanks


I like short answers.

Nope, activation codes only work on one Machine at a time (if Seven came with a PC it can only be installed on that PC) and installing it on another machine would be illegal and against the EULA anyway.

Oli

Read other 3 answers
RELEVANCY SCORE 51.6

Hello,
We are currently facing issues with around 1500 Windows 10 systems that seem to have vcredist 2013 x64 corrupted and apps that use this component fail to install due to the below error.

Product: Microsoft Visual C++ 2013 x64 Minimum Runtime - 12.0.21005 -- A later version of Microsoft Visual C++ 2013 x64 Minimum Runtime -12.0.21005 is already installed.
Is there a possibility to use MicrosoftProgram_Install_and_Uninstall and deploy a script for it to remove just Microsoft Visual C++ 2013 x64 Minimum Runtime?
We have tried force uninstalling with the installation setup of vcredist via cmd, but that does not work.
Thank you!

Read other answers
RELEVANCY SCORE 51.6

Need some help on this problem.

I have a four machine home network sharing an cable connection through a hub. Everything works perfectly.

I just purchased a D-Link #DI-707P seven port router. The router is setup fine but two of my machines can not see the router, the other two work OK. I've tried pinging the router, changing the ports on the router, rebooting the router, resetting the router, gone through the network configurations on the machines, tried setting a static IP, all with no success. None of these machines are running a firewall. The only change to my network is replacing a hub with a router.....that's it.

However, if I reconnect these two machines to my hub, and then connect the hub to the router, everything works.

I called D-Link support and they tried to get things going but were unable to. The guy told me that he has never heard of this before. I find it hard to believe that I'm the only person that has had this problem.

I can't figure it out. Any ideas? All help appreciated.
 

A:D-Link Router Can Only See 2 of 4 Machines

Read other 16 answers
RELEVANCY SCORE 51.2

Purchased new laptop loaded with Windows 10 Pro which cannot see the Windows server 2008 R2 or map a drive on network. Can see all the 32bit workstations running Windows 7.  Upgraded Windows 7 machine to Windows 10 with the same result except the
mapped drive on server still works.
Can anybody help me

Read other answers
RELEVANCY SCORE 51.2

I am looking psexec commands to install exe
scenario:
I had copied source folders \\server1\test  into  designation (C:\windows\test) via PowerShell
now I am looking psxec complete command to run exe on remote machines (remote machines will take from txt file)
PSEXEC syntax or command  to run exe on multiple machines 

Read other answers
RELEVANCY SCORE 51.2

I hope this is an easy one.

I maintain WAY too many e-mail addresses (like most of us), but I have two accounts that I need access to on all of my machines. I know I can configure the mail application to leave messages on the server so I can check (and delete) them from another machine later, but how do I keep OE from downloading the same message over and over?

If I want to check my personal mail account on my work machine, but be able to download the mail at my home, how do I check my accounts at regular intervals without having many copies of the same messages at work?

There has to be a simple solution that I am missing.
 

A:Solved: OE6 Mail Configuration For Multiple Machines

Most ISPs have a web mail service. I have Earthlink and can check my mail on the internet and if I want to read or delete the mail before I download it to any of my computers, I can do so from the web.
 

Read other 2 answers
RELEVANCY SCORE 51.2

Hi all,
Just a bit of background...

I have recently taken over as IT support for a small school.

The school wants all the PC's re-imaged (Win 7 Pro... checking tomorrow if 32 / bit)

All PC's running on school domain to a local Server 2008 

There are no images available on the network and the old IT company is un-contactable.

Each PC has it's own Product Key label.

My question: Is it possible to get a 'blank' (ie. no Product key) Win 7 ISO, put it on the server, and then reinstall Win7 on each PC.... once installed (or during installation) we can enter Product key.

Many thanks!

Read other answers
RELEVANCY SCORE 51.2

I just got this problem on 2x Win7 and 2x Win8 machines today. (20 other machines are ok)
 
All happened within 1 hour of each other.  multiple 30-60sec freezes with any and all programs (all office, trillian, notepad, firefox, ie, chrome, file explorer.... etc) in normal (not responsive showing up in titles). explorer.exe would crash multiple times as well.
 
Works perfectly fine in safe mode .
 
ran the following (in safe mode with networking)
 
rkill (found nothing)
tdsskiller (nothing)
adware (nothing)
malwarebyte (nothing)
malwarebyte rootkit scanner (nothing)
eset online (nothing)
 
I then ran Temp File Cleaner, but didnt help a bit.

A:all programs randomly freeze (multiple machines)

It was bit defender that was causing the problem. Uninstalled it and everything when back to normal

Read other 1 answers
RELEVANCY SCORE 51.2

Hi there

I'd really love a keyboard that had say 4 buttons on it --like Fn buttons that would switch output to any one of 4 machines -- such a simple idea but why nobody hasn't yet got one out on the market I can't understand it

I'm really FED up with messing around with two / 3 physical keyboards and I don't want a USB switch box on my desk.

All the keyboard would need is 4 USB outs (or 4 receivers for wireless) the active connection being made by a key press on the keyboard. In fact the only difficulty would be the right receiver for the wireless transmitter but that is easily solved by say a different colour key on the keyboard and an id (same colour) on the receiver.

I'm sure some of you testing several machines on a workbench have faced similar problems of multiple keyboards.

Any budding entrepreneurs out there --I'm sure loads of you have felt a need for this type of keyboard. Maybe there is one - but not seen at all !!.

Any engineers -- any idea how I could even consruct one --I'm quite handy with a Soldering Iron etc.

Cheers
jimbo

Read other answers
RELEVANCY SCORE 51.2

Hi all,
Just a bit of background...

I have recently taken over as IT support for a small school.

The school wants all the PC's re-imaged (Win 7 Pro... checking tomorrow if 32 / bit)

All PC's running on school domain to a local Server 2008

There are no images available on the network and the old IT company is un-contactable.

Each PC has it's own Product Key label.

My question: Is it possible to get a 'blank' (ie. no Product key) Win 7 ISO, put it on the server, and then reinstall Win7 on each PC.... once installed (or during installation) we can enter Product key.

Many thanks!

A:Install from server to multiple machines using 'blank' ISO

It appears I was able to get an ISO using the 'Windows ISO Downloader'

I can get into WinPE on each machine by hitting F* key (forget what it was) - I was able to choose 'Reinstall Windows' (or similar) and I can connect to the Server2008 machine without issue.

Can I now just pop the ISO in there? (Or should I extract the ISO and put it in a folder on the Server 2008 machine?)

During re-installation, i'm happy to have to manually enter the hostname / domain to connect to on each PC which i'm reinstalling. I know it will take a while but it's only about 30 PC's so i'll get over it.

Read other 1 answers
RELEVANCY SCORE 51.2

Hi There
I need to help a company wipe 18 HP branded Desktops and most of them are with 500GB SATA HDD of 3.5inch.

What is the best way of doing this as the company need me to make sure the Data is securely wiped and need something like a Low level format like copying zeroes.

Also I need to provide them with a report that the Data was securely wiped.

I need to do this in around 5 hours and this also need to be taken in to consideration.

thanks
Lakshan.

A:Data wipe in multiple Desktop machines

Depends on how sensitive and likely to be searched for by a future user the data is .

Something like Partition wizard bootable disk/USB could completely wipe at partition level which may be sufficient for secure wipes

Another alternative is 2015: How to securely erase hard drives (HDDs) and solid state drives (SSDs) | ZDNet

The only true secure wipe is complete physical destruction of the drives

Read other 1 answers
RELEVANCY SCORE 51.2

I have been asked to create a scheduled task for machines in meeting and conference rooms that reboots them after 4 hours of inactivity.
I have the xml file exported from my own machine, but I can't find a way to allow this to import via script that doesn't need the target system name.
Is there either a way to import a single task into multiple machines withouth having to edit the script for each OR a way to add a task via a registry edit?

Read other answers
RELEVANCY SCORE 50.8

Problem: Everytime I plug a computer into my wireless router, the system is no longer able to see any computers on the network and is not able to go onto the internet. Also, after connecting a system to the router, the system is no longer able to connect to the internet even when directly connected to the cable modem. I've also noticed a strange peculiarity when I open Internet Explorer. It tries to load http://www.trendmicro.com/404.asp?404;/<whatever my homepage is set to/>. That address is present in the address bar and in the status area. That address constantly blinks in the IE status area as if it was loading it over and over again.
Steps I've taken to Diagnose the Problem:

Step A
1.) Formatting the system
2.) Install WinXP Pro
3.) Install Norton Anti-Virus 2002 and connecting directly into the cable modem to download the latest updates. Internet works fine at this point when the system is plugged directly into the modem.
4.) I Bought a brand new Linksys BEFW11S4 and connected the Cable Modem into the WAN and the computer to it. It works fine.
5.) Now, I plug the computer and the modem into my old router (the one having the problem). I immediately go to the router administration and turn off WEP. (I have to do this at this point before the problem occurs because once the problem starts to happen, I won't be able to see the router). Once I'm connected to the old router, I can't surf and my IE trys to load the http://www.trendmicro.com/40... Read more

A:Router is Screwing Up My Machines - Perplexed

Read other 7 answers
RELEVANCY SCORE 50.8

Hi Folks,
I bought a Nexxtech router at Circuit City yesterday. So I hook up dsl speedstream modem to the Wan port on the router. Connect 2 pc's to the other ports on the router. Run the Nexxtech setup wizard. Great I am online with both PC's!. Reboot and get i/p conflict. I set each pc to obtain i/p address to automatically. I am not really sure what config was supposed to take place on the router itself which has address of 192.168.0.1. I can get to router setup by going to 192.168.0.1 and get to the admin functions. Any help on this would be appreciated.

Lizard
 

A:Help setup Nexxtech router and 2 XP machines

Read other 16 answers
RELEVANCY SCORE 50.4

Hello all,

I'm encountering a very strange and frustrating problem with some of my Windows 7 machines... I'll attempt to explain this as fully as possible, please let me know if any knowing any other information will be helpful.

I recently started a subscription with Comcast for a 50mb Down/10 mb Up high speed internet service.
I am using 3 different websites to analyze the download speed of this connection on multiple computers (speedtest.comcast.net, speedtest.net, speakeasy.net/speedtest).

The issue is, the 50mb download speed works for some of my machines but not for others.

The following machines receive the full 50mb (or higher) download speeds when checking with the above sites:
MacBook Pro
Acer Aspire One - running Ubuntu Linux
Dell Latitude E5410 - Windows 7 Enterprise

When I try this with my other Windows 7 machines, I get results of less than 10mb down. These machines are:
ASUS G73 - Windows 7 Home Premium 64bit
Dell Latitude E6400 - Windows 7 Enterprise

These tests were conducted with direct hard line hookup to the modem, no router.

I know for a fact that the service is working at full capacity, since I get the full download/upload speeds with the 3 machines. But I cannot figure out why the other two are more than 80% slower.

All of the firewall settings are identical across the Windows 7 machines.

I tried starting my my ASUS machine in safemode, to see if some particular process was slowing things down, but the slower internet speeds remained.

Needles... Read more

A:Vastly inconsistent bandwidths across multiple Windows 7 machines

Have you tested since? Any results? It'd be good to know if it was consistent or not.

Read other 5 answers
RELEVANCY SCORE 50.4

I have today placed an order for 40 new machines for my place of work. All are identical in spec. We want to set up one machine and then ghost the image to all of the other ones. We have Norton Ghost 2003.

The machines will be running Windows XP Pro. All are network ready.

What is the way (and easiest way) to go about the Ghosting process as we have only perviously Ghosted images for Win95/98 machines and using an old version of Ghost (v 5 I believe).

All advice appreciated.
 

A:Norton Ghost 2003: ghosting to multiple machines

Read other 16 answers
RELEVANCY SCORE 50.4

Hello first post...

Was wondering if anyone has seen an influx of script errors in browsers recently. I've got about 25ish machines that for no rhyme or reason all seem to lock up for almost an indefinite period. It is happening in both IE and Mozilla and doesn't care what the machine specs or OS is. And for that matter the age of the computer. I have some 4 year old boxes doing it as well as ones we have just pulled out of the box and installed.

I'll post back if I come across anything I was just hoping someone else has run into this lately as well.
 

A:Solved: Browser script srrors on multiple machines

Read other 7 answers
RELEVANCY SCORE 50.4

Basics: Windows 2003 Server with a domain behind Cisco 1811 router/firewall.
Primary Domain Controller and Secondary Domain Controller both Win 2k3. 30 workstations. Active Directory setup with roaming profiles. No proxy server.

Affected Workstation: Windows XP SP3 with IE8. Rebuilt TCP/IP stacks and Winsock on workstation. Removed and reinstalled IE. Listed 2 internal and 2 external DNS Resolvers in DNS tab. Can ping external IPs from command prompt.

Problem: I have a single user that can not log onto the Internet with IE8. No one else is having any issues. In the information bar at the bottom left when attempting to open Google (or anything else) it gives the "DNS Error.html" warning then displays "Website can not be opened". I can log this user off of the workstation, log on as admin or anyone else, and internet connectivity is no issue. If he logs onto a different computer that has no problems, he has the same issue of no connectivity. This would indicate that it is somewhere in his personal settings. How would I diagnos this or make changes in these settings so he can get on the internet? Or do I need to look somewhere else?

A:Single user can't connect to internet on IE8 on multiple machines.

Hello and Welcome to TSF!

See if resetting the Hosts File helps.

Also, please verify if you have any Proxy settings, if you do then remove it by following this guide.

An update will be appreciated.

Read other 5 answers
RELEVANCY SCORE 50.4

Hello,

My company purchases Dell Optiplex machines,
these BSODs have been happening about monthly on 5-8 machines all purchased at the same time which makes me feel it's not a hardware issue but a corrupt system image possibly from Dell?

Here are two computers BSOD files.

A:BSOD on multiple Win 8 Machines Dell ntoskrnl.exe Ntfs.sys

Debug Files reuploaded to original post

Read other 1 answers
RELEVANCY SCORE 50.4

I want to know if it is possible to connect 2 machines on one router but with different operating systems on each ( one has windows ( 7) OS and other linux OS (puppy linux). Is it doable and what is the procedure?
 

A:Can 2 machines, one with linux and other with windows, be connected to same router

You can connect any network device to a router.
 

Read other 2 answers
RELEVANCY SCORE 50

Hi All, I've Deployed so far 3 Lenovo E580's using the April 2018 SCCM Package availiable on the Lenovo Downloads page for this, It all installs perfectly however I've noticed now with all three laptops the integrated camera is not working. Windows is not detecting a camera is installed on the system. Checking Device Manager, Integrated Camera is showing with a Yellow Warning Triangle when you try to update from Windows or from Location an error message is displayed 'The Install Class is not present or valid' I've removed the drivers and manually installed again and same issue persists.I've reinstalled USB Root Hub, No help.I've Updates BIOS and ran all the latest updates When Looking into Event Viewer i've noticed the class guid is showing as 00000 000000 0000 00000. I'm not running an N version of windows, this is on a 64 Bit Windows 10 Pro 1703. Any help greatly appreciated!!

Read other answers
RELEVANCY SCORE 50

So im all out of ideas on this one. We have a bunch of windows 7 machines that auto load a "student" AD account on boot. This account loads a mandatory roaming profile. For some reason the majority of the machines keep loading temporary profiles
and when i go to C:/users there are multiple student temporary profiles. I have checked to see if the profile was corrupt in the registry but that was not the case. Also the student password never expires and is only part of the domain users group. Any help
is greatly appreciated.

Read other answers