Over 1 million tech questions and answers.

Speed Fan control required on AIO Ideacetre 510s -...

Q: Speed Fan control required on AIO Ideacetre 510s -...

Hi, It's brand new AIO Ideacetre 510S. Fan is all the time at full speed, regardless CPU is idle or working hard. It's very very loud. The only difference I can see is when GPU starts. It's even louder but in case of GPU - expected. I cannot find any tool for fan speed control. There are some drivers called "fan speed control driver" on Lenovo site, but I cannot install them due to the fact it's not working on 64bit W10.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Speed Fan control required on AIO Ideacetre 510s -...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 57.6

Hi,I'm trying to adjust the contrast of my screen with windows 10, and i'm trying to calibrate it. But the calibration ask for a 'contrast screen control'. It says that it can be a button, but i don't find it. Where is that 'contrast screen control'? How can I calibrate the constrast? Help please. Thank you.

Read other answers
RELEVANCY SCORE 57.6

Hi,I'm trying to adjust the contrast of my screen with windows 10, and i'm trying to calibrate it. But the calibration ask for a 'contrast screen control'. It says that it can be a button, but i don't find it. Where is that 'contrast screen control'? How can I calibrate the constrast? Help please. Thank you.

Read other answers
RELEVANCY SCORE 57.6

Wondering what RAM modules people have upgraded their Lenovo Ideapad 510s (80UV001BUS) with. Looks like it only has one slot and is only upgradeable to 16GB. What about speed and latency? Crucial has different speeds and latency listed. http://www.crucial.com/usa/en/compatible-upgrade-for/Lenovo/ideapad-510s-(14-inch) It has ones at 2133MHz, 2400MHz and 2666Mhz and latencies from 15, 16 and 17. Only a $14 difference between their cheapest 2133MHz and their most expensive 2666MHz. Newegg sells other modules at the 2666MHz speed that Crucial says is the max that seem compatible. Patriot Viper 16GB DDR4 2666 PV416G266C8S at CL18 and HyperX Impact 16GB DDR4 2666 HX426S15IB2/16 at CL15. The numbers make the HyperX look like the best for this laptop with it being $14 more than Crucial's fastest module. Newegg also has 2800MHz and 3000MHz offerings too. Does this chipset support those speeds? The 2800MHz being made by Patriot and the 3000MHz made by G.SKILL. The latency on the G.SKILL module is CL16, so pretty good but considerably more expensive. $27 more than Crucial's fastest and $13 more than HyperX's fastest and its on sale right now (retails at $180.99). Whats the fastest RAM the Intel HM170 chipset can support and will this laptop allow it? Intel shows that the i7-7500U supports up to 32GB memory size and DDR4-2133, LPDDR3-1866, DDR3L-1600 memory types, yet Crucial says it can support 2666MHz, feeling confused. My main goal is to p... Read more

Read other answers
RELEVANCY SCORE 56

For the benefit of anyone struggling with slow wireless speeds on a Lenovo laptop with the Qualcomm Atheros QCA9377 wireless card, here's what worked for me. (tl;dr: disable WMM/QoS on your router) So I just purchased a new IdeaPad 510S-14ISK.  From the start, the wireless seemed slow, but I planned to remove Windows 10 and install 7, so I didn?t pay too much attention.  After a clean install of Windows 7, the wireless was still very slow.  Running speedtest.net I found 1-2 Mbps down and 30+ up.  Other laptops in the house (Dell and Asus) get as high as 45 down and 45 up.  (I have Verizon 50/50.)  On Ethernet, the IdeaPad gets the same speed as anything else, so this was specifically a wireless issue. I spent a lot of time reading different solutions and trying some random things: Removing and reinstalling the wifi driverLogging into safe mode with networkingDisabling b/g support on the routerUsing an optimization tool from VerizonEtc? Nothing made any difference. Finally I found a couple of articles: http://www.ybrikman.com/writing/2012/02/19/got-slow-download-but-fast-upload/ (where I stole the tl;dr summary) http://www.tomshardware.co.uk/answers/id-2753464/atheros-qualcomm-qca9377-802-compatibility-issues.h... As soon as I disabled the WMM/QoS on my FIOS router speeds on the IdeaPad jumped up to 30+/30+.  Amazing difference and performance is perfect.  I think this problem is... Read more

Read other answers
RELEVANCY SCORE 49.2

Hi, all;

i want to be able to do the following... if anyone could help me... i would appreciate it..

my pc is running win xp sp2 and another sp3 --- (2pcs)
on pc 1 there r 6 user accounts including 2 admin a/c
i want 3 users to have internet access while on the same time on the same pc deny internet access to the other 3 users

on pc 2 i want to be able to deny internet access but allow network access
if u need any more details please mail me

can this be done?
please reply...
 

A:internet access control required...

Read other 6 answers
RELEVANCY SCORE 48.8

Is there a way to require a password whenever the UAC Box appears?

I'm wondering... Is there a way to force UAC to require a password anytime it pops up? I've been trying to increase security by using a non admin account, but that presents a problem. First of all, I can't use some programs due to inaccesible files. Not to mention I have to log into an admin account anytime that I want to do anything security related. I don't like to use the admin account because after the initial password, there is very little internal security other than a UAC box and even those are just Yes/No.

What I want seems to be a mix of the two, similar to the way user accounts work on OS X. Whenever I attempt to access something secure (ie. something that UAC would notify on) Windows should ask me for the administrative password. This way even if I'm on an admin account, I'd still need the password to access the feature, instead of just getting a worthless pop up that asks me whether I'd like to proceed.

Apparently in some installations, a standard user would be prompted by a password when trying to access something security related. On my computer, I just get an error and/or a dialog that says to log into an administrative account.

This is the type of prompt I want:

A:User Account Control: Password Required?

Hi,

Link applies to Vista UAC - have not tested if there are any major differences in 7.

Configuring and Disabling User Account Control

Hope this helps and regards

Read other 9 answers
RELEVANCY SCORE 48.4

Hey, guys!
Not sure, if this is right section.. But when ever I turn on my pc I get messige saying that I need bios update in order to use CPU at full speed. Problem is that I already have the newest version of BIOS that there is for my motherboard.
So I wanted to ask - is there a way to still use my cpu full speed without update (bypassing that error messige or what ever is it supposed to be; manualy add driver for cpu or what ever is needed to run it at full speed; or something else).

I bought new CPU cause my old one was slow. But now because of BIOS runing it on safe mode - my new cpu feels even slower..

A:BIOS Update required to run CPU at full speed?..

Can you list you mother board & processor?
I'm going gt take an educated guess & say your motherboard does not fully support your CPU.

Read other 9 answers
RELEVANCY SCORE 48

I just installed XP SP2 on a computer. Then I downloaded just the driver from AMD without the Control Center. After installing the driver the computer rebooted and XP would not run. There was no error message, just a BSOD.

So I installed XP again and then the driver and once again got the BSOD.
 

A:Is Catalyst Control Center required for ATI Radeon cards?

No you do not need the control center I never install that stuff. Can you boot to safe mode and uninstall the driver? Sounds like maybe the wrong driver. Other thing you can do is boot like you would tapping F8 to safe mode only choose "enable vga driver" and then boot up.
 

Read other 3 answers
RELEVANCY SCORE 48

I keep having this come up upon rebooting Windows and can not run CCC app, it shows in the task bar but will not display the app itself.

Sometimes it will say error occured and needs to be shut down.

I have reinstalled .net framework and CCC twice already including downloading some larger .net 3.5 package and .net 4.0

This thing refuses to work and so far its been exclusive to Vista everytime I run it on Vista, XP it would do nothing but cause display problems, although thats XP which was the last installation.

solutions?

A:microsoft .net framework 3.5 is required to run catalyst control center

Quote:




I had the exact same problem, Catalyst Control Center won't open.
Did the below steps and it works fine now.
1.I went to AMD website ... Raid. Frag. Dominate your games. | GAME.AMD.COM
2.Downloaded and Saved to my desktop the ?Full Catalyst Software Suite (Recommended)? for my PC and suitable for my Win 7 64-bit operating system (For now, it's ATI Catalyst version 10.2 ...about 71.3MB).
3. After saving the full Catalyst Suite to my desktop,
I next, Downloaded/Installed/Opened Ccleaner from ... http://www.piriform.com/ccleaner/u [...] 111&l=1033 ... (for now, it's version 2.29)
4.Clicked Analyze.
5.Ran Cleaner to delete the analyzed files.
6.Rebooted PC.
7.Opened Ccleaner again after reboot.
8.Clicked Tools (left column).
9.Clicked (highlighted) "Catalyst Control Center" (available in my system) and clicked Run Uninstaller (right column).
10.When uninstall was completed, then next, I uninstalled "ATI Catalyst Install Manager".
11.(if "Catalyst Control Center" is not in Ccleaner, go directly to "ATI Catalyst Install Manager" and uninstall it using CCleaner as in #9 above).
12.NEXT, I opened (2-clicked) my downloaded ?Full Catalyst Software Suite? that I downloaded to my desktop earlier.
13.UNINSTALLed everything by checking the ?UNINSTALL? button ... DID NOT install yet ... there are still elements, like driver, not cleaned out yet by Ccleaner. Followed the steps of the Catalyst Suite and unin... Read more

Read other 1 answers
RELEVANCY SCORE 48

There should not be any gap when the laptop is closed but on the right side, there is a decent amount of gap which results in dust and there appears to be a slight bend in the screen. How did this happen and what should I do?

Read other answers
RELEVANCY SCORE 48

On home networks, many people like to stream music and video. At my house, we have kids who like the music video, and do not want the video stream to become balky, freeze or dissolve the screen into pixels.

So, here is the complete scenario for deploying a Windows 7 64 Pro peer network-- all to become, in effect, a Windows-based music machine. The home network is based on a single Windows PC hosting a shared internet connection for other machines. The Windows machine host connects to the household router (and internet) upstream, and connects downstream to a switch, creating a subnet to which are connected two or more Windows peer machines.

All this sounds only slightly elaborate, but to be frank, we have security concerns-- teens, let's say, who need to have their internet connections monitored by some "Net Nanny" type of program to help them stay out of trouble. That is why the kids will be on a subnet attached to the Windows shared connection host machine.

Now, the issue and question-- with streaming music, the video quality must be acceptable, and that means more powerful hardware. On the Windows internet shared connection host machine, is it better to have a faster CPU with only 4gb to enable streaming music and video for two separate PCs downstream, or to have more RAM (8gb) and a slower CPU? The household budget, alone, currently determines the power we can provide the streaming host machine, and we are looking at Dell refurbished corporate desktops ... Read more

Read other answers
RELEVANCY SCORE 46

Hello to all!

I have lately suffered a lot of crashes during a days worth of operation on my machine. But unlike the usual process theese dont seem to generate any error as the machine simply freezes. No real BSOD.

Example:
I sit and do my thing then both my 24" monitors loose signal at the same time and there is no way to get it back and even pressing power button will do nothing (unless held down for 4 secs ie shut down by force)

What I have done so far:
I have tested 2 identical graphic cards, same problem, I have run Memory diagnostics, come out clean, ive run Chkdsk and integrity, nothing. Full kaspersky 2010 scan as well as spydoctor and windows defender, nothing.

I am running graphics driver 257.21

What I am running:
Windows 7 64-bit Ultimate
Asus Rampage II Extreme Motherboard
2 x 24" Samsung SyncMaster T240 Monitors LCD
2 x 300GB WD3000HLFS-01G6U0 Velociraptors in Raid 0
2 x 1TB WD1002FBYS-01A6B0 in Raid 0
1 x Optical Drive Optiarc DVD RW AD-7170S
Intel i7 920 C revision processor
Geforce 285 GTX Graphics Card
12 GB ram in 6 x modules of Corsair DDR3 10700 CM3X2G11600C8D
Soundblaster XI-Fi Titanium Soundcard
Thermaltake 1200 Watts Toughpower Power Plant

My apologies if I done this wrong but its my first post on tech forums so be gentle
Now im gonna go get religious and hope someone knows the answeres
 

Read other answers
RELEVANCY SCORE 45.6

The faugni application won't run due to driver signing. I've tried speed fan to no avail. My Dell 1750 Windows 7 Professional keeps turning off because of overheating. I can't afford to get a mat right now, but I was wondering if there is any program that I can use to keep the fan running enough to lower the temps that are causing the problem.

Any assistance would be greatly appreciated.

Read other answers
RELEVANCY SCORE 45.6

Hey, I need some way to control my Gateway laptop's fan. If I don't, I think my thighs will be on fire. I do not want to overclack and I do not have the money and time to by a cooling pad. Can you help with any fan control programs and/or way to make the fan run faster?

Thanks.

 

A:Fan Speed Control

Read other 8 answers
RELEVANCY SCORE 45.6

Hello all,i recently bought a new PSU and so far it seems to do the job quite well,however when i run certain more demanding games like The Witcher 3 and the PSU itself goes into high load,the fan makes quite a lot of noise.

Most reviews i saw online about the PSU seem to say it's not loud at all,and granted it's not loud while in idle.The question is, is it possible to somewhow lower the PSU fan speed ? The sound it makes is similar to a cheap office fan,however as i said,while in idle it's dead silent.

PSU : seasonic M12II-620 EVO Edition

PC specs :

- FX 8350
- G1 Gigabyte 1070
- 1 x HDD
- 990xa-ud3 MB
- 16 gb ram hyperx savage
- 4 x case fans
 

A:PSU Fan Speed control ?

It should not make the excessive noise you describe
Indeed even with the fan running it should be very quiet as it is a fluid type fan bearing, far quieter than a simple sleeve bearing as found on cheaper PSU`s or indeed quieter than a standard ball bearing

Are you sure you have it mounted correctly
http://seasonic.com/position-power-supply/

I will check the base requirements of your system on the info I have and post back. If you have bought the minimum PSU wattage then you should not have done so
For instance minimum system requirements 600 watt always buy next up eg 700/750 watt

Although the PSU meets the based requirements of the system 125watt CPU and 150 watt graphics, the recommended psu for the card being 500 watt that of course does not take account of other components - hard drives etc OR indeed OC

See this
Seasonic recommend it for office use and causal gaming
https://seasonic.com/product-category/consumer-products/m12ii-evo-series/
use lower left pane for selecting heavy gaming
 

Read other 1 answers
RELEVANCY SCORE 45.6

Vista 64bit Dell Inspiron 530 Looking for a program like speed fan, but will work for my dell? Anything else out there>??
 

A:Looking for fan control speed...

If Speedfan doesn't work, then most propably any else program won't work either. You could want to replace the fan with a controllable one or get a voltage regulator for the fan or for all the fans in one.
 

Read other 1 answers
RELEVANCY SCORE 45.6

I have a HP Pavilion dv6-2088dx

Here's the link to the specs: http://h20000.www2.hp.com/bizsuppor...c=us&objectID=c01920676&jumpid=reg_R1002_USEN

I play games on my laptop like Counter Strike: Source and CrossFire and World of Warcraft and when I play them games, my laptop gets really hot. I know the heat is coming from my graphics/video card and my processor but is there any way I can control/change my fan speed?

Also my laptop is very well ventilated!

Please help me!

Thanks,
MasterCookiez
Nick
 

A:Can I control my fan speed?

The fan's speed (in most cases) is decided on how hot the processor is, or how much power is in use. I don't think it's possible to control it.
 

Read other 1 answers
RELEVANCY SCORE 45.6

Has anyone else noticed that the GPU fan speed control is not functioning with Vista 64 and the Radeon 3870x2? I am running Riva tuner to make the fan operate manually but I once had the option with Vista 64 and not flashing the card either.

A:Fan speed control

Tried using the fan control option in the Catalyst Control Center?

Read other 12 answers
RELEVANCY SCORE 45.6

i got da program speedfan 4.32 and i cant control my fan speeds it doesnt even show my fans rpm..
 

A:why cant i control fan speed

It depends on what motherboard you have, that will allow Speedfan to work properly. The fans that can be controlled must have 3-wires. You can always install a fan controller, if you really need to control fan speed
 

Read other 2 answers
RELEVANCY SCORE 45.6

This is an area where HP kinda pisses me off

they hide/disable a bunch of settngs in the BIOS settings, such as fan speed and WoL.

Does anyone know how i can monitor/control fan speeds?
i have tried sppedfan, but it doesn't seem to do anything but monitor my CPU temp. I can set a desired temp for my CPU, but that doesn't the actual temp or the fan speed. When i look into the tab that has fans in it, theres nothing there. I have also tried nTune, as i have an Nvidia GeForce 8400 GS video adapter.

Is there a program other than the two i tried to control fan speed? or a way to manually do it?

A:Fan speed control?

anyone?

Read other 1 answers
RELEVANCY SCORE 45.6

it make so much noise
i use speedfan but i dn't how to use
 

A:fan speed control

Hi akash2happy,

Welcome to TSG!

Read the Wikipedia webpage: SpeedFan.

At the end is a link for: How to use SpeedFan to monitor temperatures.

-- Tom
 

Read other 3 answers
RELEVANCY SCORE 45.2

i have an HP pavalon DV9700 and it overheats quick

iv been following this but now i am stuck at editing the .aml

control fan speed with registry hack

i cant figure out where my fan speed value is

.asl file attached to help me find it.

A:Control Fan speed with registry help

I don't think its possible, although I have no experience in overclocking, one of the comments on that tutorial is:






SpeedFan was made with desktops in mind. Notebooks control the fans differently compared to desktops. It will not work.



Is your laptop in a well ventilated place? Have you considered getting a cooling mat? Is the fan nice and clean? That last one is very important, my laptop was reaching 89 celsius before I removed the crap from the fan, now it reaches 58

Tom

Read other 2 answers
RELEVANCY SCORE 45.2

Hello, what software can I use to manually control the fan speed on my gtx 295 video card? I think I am having heat issues.
Thanks
Eric

A:software to control fan speed gtx 295

Either of these,

MSI Afterburner

EVGA | EVGA Precision | EVGA Precision

should work. Or you can try RivaTuner,

RivaTuner v2.24c download from Guru3D.com

which the other two are based on. RT may not work as it hasn't been updated in a while, and may have problems it you are using an unsupported driver.

Read other 9 answers
RELEVANCY SCORE 45.2

hi , in a few days time i will getting an ati card. it is been awhile since i used an ati card. So my question is , can i adjust the fan speed of the ati card ? Like before i can use rivatuner to set the nvidia card. So do i adjust from CCC or some other software ?

Thanks.

A:fan speed control for ati card

You can use the CCC directly.

Read other 9 answers
RELEVANCY SCORE 45.2

I've got 8.1 on a Dell Inspirion 5738 laptop, I have a generic usb mouse attached. My problem is the mouse pointer slowly starts speeding up until it gets so fast I have no accuracy. I mean I move my pinky and the cursor moves from one side of the 17" screen to the other. I go in Control Panel>Mouse>Pointer Options> and set the speed to a slower speed. At this point I only have one more notch to go down, and it's still a little faster than I want it. How do I control the speed, you know, how do I keep it from speeding up? Is there a way to keep it a set speed other than the above mentioned procedure?

Read other answers
RELEVANCY SCORE 45.2

First time posting here so hoping I do not mess up...

Anyway, my question is about controlling the speed of a mouse that is used on a system that has no settings panel for it. To expand that, I have a Security DVR setup that has mouse support but no keyboard support and all control has to be done with the mouse. Unfortunately, the mouse is way to fast for me and with the embedded firmware, no way to slow it.

Curious if they make a mouse that has a built in physical adjustment for the speed, or some kind of inline control to put between the mouse and USB port that could do this.
 

Read other answers
RELEVANCY SCORE 45.2

 Hi, While using my laptop normally it usually crashes due to overheating. I've noticed this is occuring due to my fanspeed not going up when the temperature of my laptop is going up. Therefor after a while it just overheats and crashes.However after crashed if I try to reboot it still notices the laptop is too warm and therefor it turn on the fans to full speed and refuses to boot. So for some reason during windows it can't control the fan speed but during booting it can.I've tried downloading programs like Fanspeed but they all can't seem to find or control my fan.How do I fix this? Best regards and thanks for reading this, Niek

A:Fan speed control malfunction

MAde an error, using windows 7 64bit

Read other 1 answers
RELEVANCY SCORE 45.2

i have an HP pavalon DV9700 and it overheats quick

iv been following this but now i am stuck at editing the .aml

control fan speed with registry hack

i cant figure out where my fan speed value is

.asl file attached to help me find it.

A:Control Fan speed with registry help

I don't think its possible, although I have no experience in overclocking, one of the comments on that tutorial is:






SpeedFan was made with desktops in mind. Notebooks control the fans differently compared to desktops. It will not work.



Is your laptop in a well ventilated place? Have you considered getting a cooling mat? Is the fan nice and clean? That last one is very important, my laptop was reaching 89 celsius before I removed the crap from the fan, now it reaches 58

Tom

Read other 2 answers
RELEVANCY SCORE 45.2

Hello all.

I have 3 computers on the same network connecting through a router, first is mine, second and third are my brothers. The problem is my brother is constantly downloading music albums, movies etc, Which causes mine to "lag" i can barley doing anything takes upto 2 minutes sometimes to load a website.
Is there anything i can do to minimize the issue? such as share the internet speed into 3? so when hes downloading he is using his "portion" of speed?

We are all connected through a wireless router if that helps

Thanks in advance
Liam
 

Read other answers
RELEVANCY SCORE 45.2

is that possible to control the upload speed (the bandwidth,k/s) through XP? if not, does anybody know where can I find a free software to do so?
 

A:control upload speed

Can you explain a bit more, what you want to accomplish?

Do you want to limit the speed to a lower level than the maximum achievable by your connection? What type of connection do you have?

There is nothing easily accomplished within XP, but if your exact needs are known, there are likely some utilities available
 

Read other 2 answers
RELEVANCY SCORE 45.2

I have a problem: i just bought new motherboard and sometimes i have bsods. Well the fans works always at same speed and i thing it isnt ok. How can i make them chenge the speed in automatic, without FanSpeed software?

A:Fans speed control

Boohoo, no specs. In any case, a BIOS update may take care of it. I had a tornado going on my last board but a quick check and a BIOS update fixed it. There's usually fan control in the BIOS as well. Some motherboard manufacturers provide utilities that will allow fan and temp changes and/or alarm settings. System specs would go a long way in helping to provide specifics.

Read other 4 answers
RELEVANCY SCORE 45.2

Hello guys I have this problem with my internet. My internet speed is really low and when I'm playing game (path of exile) my ping is so high and It's really annoying. I have a PC connected to a DSL wifi router and my sister and mother are using their laptop most of the time and they just hog the internet speed with youtube and facebook. Can I set the internet speed so that I could lower their speed?
Here's the device webpage.. Sadly this router don't have a QoS.. If you want more picture of the device interface I would gladly provide them.. So far I only see these 2 pictures as ones that should enable me to configure my network.
 

A:How to control the speed of my internet

A router with QoS may or may not really help. Probably more helpful would be to upgrade (if any of these are available) to higher DSL bandwidth or cable or fiber.
 

Read other 1 answers
RELEVANCY SCORE 45.2

Ive been through both the bios and speed fan and nothing I do can slow the fans down. I have and ibuypower snowblind pc and don't know what the next step would be in troubleshooting this problem
 

Read other answers
RELEVANCY SCORE 45.2

I want to turn my fan on high for my high performance or balance setting because my laptop puts out a lot of heat sometimes even reaching a tjmax of 221 F or I believe its 105 C. I just got it and I am a heavy mmo gamer which doesn't weigh as much as a FPS so I figured it could handle it. Which it does pulling 100+ frames in FPS and MMOs. My problem is the overheating and last I checked 180F-190F is pretty hot for a laptop, but my fan won't turn on high cause of the stupid acer CPU %over desire = %+ of its speed which is retarded. I was wondering if anyone knows a program that will bypass the acers third party prevention system so I can turn on the speed to max.

My computer:
Acer Aspire 7741g-6426
intel i5-480m(2.66mhz[turbo 2.93mhz])
AMD Radeon HD 6550M 1g ram dedicated video card
4gb DDR3 memory
 

A:Laptop fan speed control

Read other 8 answers
RELEVANCY SCORE 45.2

Bought used M58-7360. Fan never speeds up. Stays around 25% I'd guess. I was transcoding video in plex and cpu usage was at 100% and cpu temp was at 170 degrees F and rising. I pulled a wire attached to the "thermal" pin on the front of the mobo to get fan to speed up and cooled the cpu down. After researching, apparently the only way to control the fan speed is the "quiet technology" setting under the ME selection in the Intel AMT software that you access by pressing ctrl+p at boot. I got to the area where it should be listed and it isn't there. It isn't in the normal bios. I installed speedfan program but it doesn't "see" the fan. I've also tried resetting cmos. Please help!

Read other answers
RELEVANCY SCORE 45.2

can anybody explain to me how could I control the upload speed in my XP home edition?any help will be apreciated.
 

A:control upload speed

Read other 6 answers
RELEVANCY SCORE 45.2

1) lately noticing pc very slow. trying to type something takes forever whelther on internet or not.15min. goes by before see 1 letter on screen.
2)also, i can open control panel and but i can't open anything inside. Things like "Add/remove programs", "Display" etc... things inside control panel will open when clicked on but close right away. can't get them to open and stay open.
3)can't empty trash or cookies
4) i have Mcafee virus scan , i try to scan for virus, but it stops in middle and kicks me off. Try to re-download, but that to stops and kicks me off.

could i have spyware or virus? or both/

should i reformat harddrive? and reinstall eveything? I'd rather not if i don't have to.
 

A:speed and control panel

Read other 6 answers
RELEVANCY SCORE 45.2

Is there any way to control the fan speeds on the system? I checked the bios but since my fans arn't stock (upgraded) they dont appear. No Vista option for the fan speeds either. I have downloaded various programs, SpeedFan ect, but none seem to make my runs run at 100% Its always ranging from 50% to 60%.

Also, are there any good programs to overclock the CPU? I'm having alot of trouble with my MSI Neo P45 motherboard. I've got the right components and all, but it wont let me overclock my QX6700 past 2.8 when it was 2.66. I want to at least get it to 3.44ghz.

A:Fan Speed Control and Overclocking

Hi,

Not sure what's going on with your fans are you sure they are supposed to run at 100% ? - are the correct options enabled in the Bios - worth checking the manual or get it from your mobo's website - also see if they have an updated Bios available.

CPUID has oc'ing functions - it warns you it's at your own risk, of course - they also do HWMonitor which should help you see what's going on with your fans and temps.

CPUID

Hope this does the trick

SIW2

Read other 2 answers
RELEVANCY SCORE 44.4

I have a new Radeon 8500 I installed in a computer Im building to sell. It works great but the fan is ungodly loud. Its louder than the case fan. I tried the fan from another 8500 and its the same. I was wondering if there was a program to adjust the fan speed. There are no mounting hole in this card so I cant replace the fan.
 

A:Can you control video card fan speed???

Zalman sell a separate fan-speed adjuster for about $ 7-10.-
http://www.zalmanusa.com/usa/product/view.asp?idx=14&code=017

Great if you can interrupt the fan-leads
 

Read other 9 answers
RELEVANCY SCORE 44.4

Motherboard - IPIEL-LA3 (Eureka3)
Specs Site Motherboard Specifications, IPIEL-LA3 (Eureka3) | HP? Support

I want to Know if theres a Software Program That Can Control Fan Speed!! ..

I have 2 Fan Ports on my motherboard 1 for CPU Fan & the other ones for the Case Fan i Know How to speed up the CPU Fan, But have no clue how to speed up the case fan, If at all its even possible..

Pls Help!!

A:A Tool That Can Control Fan Speed On Motherboard Help Pls..

Hmm, it all really depends on the mother board, and I'm thinking as it's an hp, you can't. However case fans spin at max rpm by default, with most folks slowing them down with the use of inline resistors.

You can try speedfan, it may do something.
Download SpeedFan - Access temperature sensor in your computer

Read other 2 answers
RELEVANCY SCORE 44.4

I have just rebuilt an old PC with various new parts. I thought the processor fan speed would be controlled by the new mobo - but it goes full speed all the time.
The mobo is a Foxconn RC4107MA Intell 775. with a celeron 3.06 processor.
I have checked the bios settings and there is an option for 'Smart Fan Control' which is enabled. Anyone any ideas why the fan speed is not being controlled. Is there something missing??
 

A:Solved: System fan speed control

Read other 9 answers
RELEVANCY SCORE 44.4

Hi

I wish to be able to control the speed/rate in which Internet explorer accesses/downloads sites.

I want to able to slow Intrenet Explorer yet keep Mozila Firefox at its normal rate.

So i don't wish to slow all applications and their access to the internet, just Internet Explorer.

What i am trying to do is to limit the usage that IE uses, e.g. max of 5MB/hour, but i don't wont it to reach the limit then just stop working, I want it to be constant so that it can keep working yet not exseed a limit.

Is this possible?

If so how can this be done?

Thank you to all who contribute to this question i appreciate it!

Regards
Ryan
 

Read other answers
RELEVANCY SCORE 44.4

HP Omen 17 so noisy - how to control fan speed? My new HP omen 17 w010ng drives me crazy - it is so noisy. Even if the Geforce is switched off, the left fan starts to switch on very easily, running a Youtube video is enough. I have read about HP Control software allowing to control fan speed - it was very difficult to install and I only found out that the ventilator settings are already on normal. I switched the ventilators off in Bios, still not much change. Then i ensured in the graphic driver that Geforce is only used for Lightroom and Photoshop, this helped a bit, but still I see that ventilators speed up far earlier then required. I have tried HWinFO64, but no fan speed controls are possible. The freeware Speedfan is the same, I see the fan speed but cannot control it.  I found the freeware Notebook FanControl, but there is no configuration file for Omen 17 available. Did anybody out there solve the problem? How can I control and reduce the fan speed?

Read other answers
RELEVANCY SCORE 44.4

Hello everyone, is there a way to control the fans  of a edge 72 3493AYG ?  i connected a 4 pin fan to the pwr fan connector but i can't manage it even using lenovo power manager where i can set only the cpu fan

Read other answers