Over 1 million tech questions and answers.

W2K3 Server can access W8 W8 computer cant see W2K server

Q: W2K3 Server can access W8 W8 computer cant see W2K server

Hi there
Why does Windows Networking always seem to hose things up ( Linux works EVERY time)

I have two computers on the SAME test private LAN one Whitehorse (W2003 server) and the other Blackdog (W8 Enterprise) both enabled "Shareable and Visible".

View from W2003 -- can see and access disks C,D, and F on W8 Computer

View from W8 - Networking shows the computer Whitehorse (W2003 server) but can't access any disks etc (or even its printer). PING even fails but W8 obviously knows it's on the Network because its found it. The stupid Windows diagnostics when you click Diagnose doesn't help at all --in fact I've NEVER found the network diagnostic panel of the slightest bit of help ever.

I've switched off firewalls etc while testing so there's no security rubbish to take care of while I'm trying to get this to work. LAN is purely LOCAL -- no computer is on "the other side" of a router.

Both machines can access independently the Internet through a Local router and connections are via LAN cable so nothing should be simpler. !! But can I get this to work !!.

I had a similar problem with W7 but it seemed to "Disappear" without me actually doing anything -- the proverbial "Ghost in the Machine" I expect.

Screenshots enc.

(Windows Networking Grrrhhhhhh! -- I'm not particularly technical with this stuff but any time I've used Networking with Linux it works STRAIGHT OUT OF THE BOX and there's no problem sharing from or to windows. !!)
Note -- Other W7 / Linux / XP computers connected to this SAME LAN (currently switched off) have NO problem accessing the server -- It's just this W8 Machine (W8 x-64 Enterprise version).
Thanks

Jimbo

RELEVANCY SCORE 200
Preferred Solution: W2K3 Server can access W8 W8 computer cant see W2K server

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: W2K3 Server can access W8 W8 computer cant see W2K server

Assuming this Windows 8 Enterprise machine isn't locked down with Group Policy.

This type of problem usually requires that you change the lanman server parameters in order to get Windows 8 working with older servers. Do these adjustments on the Windows 8 machines that needs to connect to the server.

Control Panel - Administrative Tools - Local Security Policy

Local Policies - Security Options

Network security: LAN Manager authentication level
Set to Send LM & NTLM responses only

Set the Minimum session security for NTLM SSP
Disable Require 128-bit encryption

Reboot all machines after making the adjustment.

There are two separate settings for disabling the 128 bit encryption.

Read other 24 answers
RELEVANCY SCORE 99.2

Greetings all,

I've browsed the forums a bit this evening trying to solve an issue that just showed up. Didn't find an exact fit in any other post, so I started a new one...

Computers involved:
W2K3 Standard SP2
W8.1 pro laptop

When working on the laptop this evening, i was trying to access "server" (my w2k3 computer) from the W8.1 laptop. I can ping the server IP successfully from the laptop, I can access "server" via Remote Desktop from the laptop, but I can't access it through the file browser at all. It doesn't show up in the display, nor can I simply type in the address. I've tried \\server\ and \\192.168.1.xx and neither one work. I get an error that says: "Windows cannot access \\server". Diagnostic was of no help, it couldn't find a solution at all. However, I can see the laptop from the server and access folders on it, no problem. So, it is a one-way issue: laptop --> server.

I've already checked "go to Programs and features > turn windows features on or off > enable "SMB 1.0 /CIFS File sharing". It is enabled.
I've already tried:
"Assuming this Windows 8 Enterprise machine isn't locked down with Group Policy.
This type of problem usually requires that you change the lanman server parimeters in order to get Windows 8 working with older servers. Do these adjustments on the Windows 8 machines that needs to connect to the server.
Control Panel - Administrative Tools - Local Security Policy
Local Policies... Read more

A:W8.1 Pro can't access shared folders on W2K3 server

Hi Kurt and Welcome to Eight Forums!

I would do a comparison of the Services from your other Windows 8/8.1 devices, something might have disabled. Click on the Dependencies Tab and make sure that the Services are Started.

Read other 3 answers
RELEVANCY SCORE 84.4

Hi all
just to be obtuse I wanted to run PREVIOUS OS'es on W8 as VM's so I took an older laptop and installed W8 developer x64 on it as the main REAL OS.

Vmware workstation 8 installed OK and so did the following GUEST VM's

1) W2003 Server R2
2) XP SP2
3) W7 x-64

Had all 3 running without probs concurrently on a 4GB RAM HP laptop.

Cheers

jimbo

A:W7, W2K3 server and XP run as VM!s OK on W8 HOST

VMs are VMs, if you can install the clienware and run it fine, i don't know much limitations when you install Guests.

Read other 5 answers
RELEVANCY SCORE 84.4

Hello there,

I am some problems with web server 2003 server. All time, the CPU is 100%...

I would like to start a deinfection on this computer.

Can you tell me what are the best software for a full deinfection?

Thanks

Here the Hijackthis repport :

Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 11:17:50 AM, on 3/1/2010
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v7.00 (7.00.6000.16981)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\System32\bmss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\aswServ.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Microsoft ADS\bin\saagent.exe
C:\apache\bin\httpd.exe
C:\Program Files\Merak\calendar.exe
C:\Program Files\Merak\control.exe
C:\Program Files\Merak\im.exe
C:\Program Files\Merak\pop3.exe
C:\Program Files\Merak\smtp.exe
c:\mysql\bin\mysqld-nt.exe
C:\Program Files\Ipalert\pNSClient.exe
C:\Program Files\Serv-U\ServUDaemon.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\mqsvc.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\Program Files\Alwil Software\Avast4\aswMaiSv.exe
C:\Program Files\Alwil Software\Avast4\aswWebSv.exe
C:\WINDOWS\System32\dmadmin.exe
C:\WINDOWS\System32\s... Read more

Read other answers
RELEVANCY SCORE 83.2

This may apply to server 2K also:

When I open the Shared folders management console, and open the "sessions" folder, there is some information that confused me. I am using Active Directory w/ W2K & W98 clients.

1.) Sometimes, the user name appears as the computer's name with the '$', i.e. COMPUTERNAME$ as the username

2.) the computer name for the user has appeared different ways: as an IP address, as the NetBIOS computer name (i.e. COMPUTERNAME), and as a fqdn (i.e. COMPUTERNAME.local.domain).

Is there any rhyme or reason to this? Is there any way to set the display? THis only happens with the W2K clients. The W98 clients always appear as their NetBIOS name (i.e. COMPUTERNAME).

Any help is appreciated! TIA
 

Read other answers
RELEVANCY SCORE 83.2

Hi all
Maybe should be under performance - but this is an interesting fact I've noticed.

Running a SERVER as a Workstation has a lot of advantages provided you do it properly and remove a lot of the typical server nags like shutdown event tracker, ALT-CTRL-DELETE to logon etc.

However REAL RAM usage is far far better on the server than W7 - good if you are running Virtual machines. 800MB less -- enough for a decent virtual machine itself.

Here's the available RAM on a W2K3 server and a W7-X64 machine - both with 4GB real Ram installed with graphics / audio etc on the motherboard.

W2K3 is running for or 5 IE8 sessions, W7 just booted up with no applications running

Surprising difference in the usage -- WK3 Server comes out quite a bit on top.

(Not saying W7 has poor performance --far from it but for running VM's where every byte of spare RAM is precious the server looks if it has it). In principle because a machine uses a lot of RAM doesn't mean that the OS is poor or inefficient - however the caveat here is if you are running VIRTUAL MACHINES then this IS significant.

The difference in available RAM here is the difference of being able to start another VM or not.

And of course there is NO problem running a 64 Bit guest VM on a 32 bit host - just your max RAM is only 4GB.

Since a lot of people only have 4GB RAM this could be of interest.

More than 4GB then it doesn't really matter.

enc screenshots of memory allocation

Cheers
jimbo

A:Memory usage between W2K3 server and W7

  
Quote: Originally Posted by jimbo45


Hi all
Maybe should be under performance - but this is an interesting fact I've noticed.

Running a SERVER as a Workstation has a lot of advantages provided you do it properly and remove a lot of the typical server nags like shutdown event tracker, ALT-CTRL-DELETE to logon etc.

However REAL RAM usage is far far better on the server than W7 - good if you are running Virtual machines. 800MB less -- enough for a decent virtual machine itself.

Here's the available RAM on a W2K3 server and a W7-X64 machine - both with 4GB real Ram installed with graphics / audio etc on the motherboard.

W2K3 is running for or 5 IE8 sessions, W7 just booted up with no applications running

Surprising difference in the usage -- WK3 Server comes out quite a bit on top.

(Not saying W7 has poor performance --far from it but for running VM's where every byte of spare RAM is precious the server looks if it has it). In principle because a machine uses a lot of RAM doesn't mean that the OS is poor or inefficient - however the caveat here is if you are running VIRTUAL MACHINES then this IS significant.

The difference in available RAM here is the difference of being able to start another VM or not.

And of course there is NO problem running a 64 Bit guest VM on a 32 bit host - just your max RAM is only 4GB.

Since a lot of people only have 4GB RAM this could be of interest.

More than 4GB then it doesn't really matter.

e... Read more

Read other 1 answers
RELEVANCY SCORE 82.4

Hi there

probably IMO the best server Ms ever designed - and in version 2 you can use > 4GB even though it's "technically" a 32 bit OS.

XP was based on it (in fact all XP stuff still runs on it) and it makes for an outstanding Virtual server.

Anyway it's time to move on -- I just hope the Modern Ms servers are just as good - I gave up on W2008 server, 2012 server seemed OK but a bit fiddly and I'm not sure about 2016 server -- the new licensing stuff seems totally out of order for a home lab etc. With W2k3 server you got 4 CALS with the server (or it would work with 4 clients - without any extra fee being needed. I still have the keys from TechNet so I might have a go with this on W10 as a VM.

Incidentally - not bonkers --here's a way to make W2K3 server into a really good Worksation OS -- normally Servers aren't really suitable as a workstation OS.

How to convert your Windows Server 2003... to a Workstation!

I might look at similar articles on using W2016 server as a workstation too.

Cheers
jimbo

A:An old friend (W2k3 Server) ends support soon

I never understood the point of those guides. All you are doing is making the Server OS run more like the Workstation OS that already exists. Why buy a bus and convert it in to something close to a sedan, when you could just buy the sedan? You'd also run into plenty of compatibility issues, such as AV software identifying it as a Server OS.

Server 2003 was a good product, but Server 2008, especially R2, is an excellent product.

Read other 0 answers
RELEVANCY SCORE 82.4

Hello,

Today when I was accessing the help menu on my Windows 2003 Server, I got this weird error message. I couldn't copy/paste it, so I did a screen capture and attached the JPG here.

It says something about a syntax error, and running scripts? It's just built in Windows help, so what's the big deal? And how do I make these errors go away?

BTW, no matter what answer I click on, the information from the help file still comes up, but the text formatting is all messed up and none of the graphics show.
 

A:Weird error in the Help file of W2K3 Server

http://support.microsoft.com/default.aspx?scid=kb;en-us;325192
 

Read other 2 answers
RELEVANCY SCORE 81.6

This may well be a server issue. I just don't where to begin.

I have a Windows Server 2003 file and print server on my home network. And I have an HP 4050 laser printer on the network that is shared through the W2k3 server. Previously, all PCs and laptops on my network had been running Windows XP and they could install a network printer and get their driver from the server. My Windows 7 Pro machine cannot, probably because there is no Win7 driver on the server.

How do I place the driver on the server, so that I can install the network printer on the Win7 machine?

* I have just a workgroup environment set up on the home network, no domain authentication. I'm logged in an admin on the Windows 7 machine.

(I'm guessing that there may be other ways to go about this, like maybe installing the driver directly onto the Windows 7 machine and then pointing at the shared printer on the server, but I'd just as soon get the driver onto the server so that setup is easier for future Win7 machines.)

A:Installing Win7 printer drivers on W2k3 Server

  
Quote: Originally Posted by Carson Dyle


This may well be a server issue. I just don't where to begin.

I have a Windows Server 2003 file and print server on my home network. And I have an HP 4050 laser printer on the network that is shared through the W2k3 server. Previously, all PCs and laptops on my network had been running Windows XP and they could install a network printer and get their driver from the server. My Windows 7 Pro machine cannot, probably because there is no Win7 driver on the server.

How do I place the driver on the server, so that I can install the network printer on the Win7 machine?

* I have just a workgroup environment set up on the home network, no domain authentication. I'm logged in an admin on the Windows 7 machine.

(I'm guessing that there may be other ways to go about this, like maybe installing the driver directly onto the Windows 7 machine and then pointing at the shared printer on the server, but I'd just as soon get the driver onto the server so that setup is easier for future Win7 machines.)


It's unlikely that server 03 will have a printer driver for Windows 7, you will definitely want to install the driver on the Windows 7 machine.

The problem is that with old printers it may be difficult to obtain Windows 7 drivers but that is your best bet.

Read other 4 answers
RELEVANCY SCORE 81.6

Hi. I have problems sometimes going to "My Network Places" in the Windows Explorer. Sometimes works OK and sometimes appears an Explorer.exe Application Popup:

<<The instruction at "0x10004160" referenced memory at "0x10004160". The memory could not be "read">> (Event ID: 26 at the Windows Event Box)

and the Explorer go out or is blocked and I have to Terminate process. After this; usually the second time who runs Windows

Explorer it's OK. We have PC Computer Clients with W2K3 with SP2 and connected over a network with Debian 3.0 Servers.
I read in forums that I have to make a defrag of every client hard disk but this most of times HD are nearly empty. Does It possible that this problem is related to my useful problems printing in our network printers who I was explain in another question of this forum?

LJ4300 & LJ5M Printer Network works only sometimes
http://www.vistax64.com/network-inte...tml#post596850

I hope any ideas or suggests to obtain any solution to my useful connecting problems. Thanks in advance.

A:Usually problems with Windows Explorer in w2k3 over server Debian 3.0

Hello luisben,

Unfortunatly this is a Vista forum we cant help you with Windows 2003 or Debain Linux.

The only support I can give you is run memory diagnostic tests and check the event-log for more details.

Thanks
dmex

Edit: Topic Closed

Read other 1 answers
RELEVANCY SCORE 81.6

This is a lab environment. The DC was a VM. I thoughtlessly deleted the VM of the DC. No problem - I have a copy of it. But the copy was from before this server joined the domain.

So I tried joining the domain but local admin can't do that. I tried changing the server back to a workgroup but it popped up a domain login window and asked me to authenticate as a user with privileges to leave the domain.

I also tried adding the server to the DC on the DC but that is not sufficient.

netdiag results:

Trust relationship test. . . . . . : Failed
Test to ensure DomainSid of domain 'DOMAIN' is correct.
[FATAL] Secure channel to domain 'DOMAIN' is broken. [ERROR_ACCESS_DENIED]

LDAP test. . . . . . . . . . . . . : Failed

(bunch of stuff deleted...)

Registered Service Principal Names:
[WARNING] The default SPN registration for 'HOST/SERVER.domain' is missing on DC 'dc.domain'.
[WARNING] The default SPN registration for 'HOST/SERVER' is missing on DC 'dc.domain'.
[FATAL] The default SPNs are not properly registered on any DCs.
Everything else in the netdiag test seemed to work OK. DNS is working. Just can't rejoin the domain.
 

A:Solved: W2K3 Server lost its domain controller

OK I figured it out. I had to go through three changes/reboots to get it fixed.

First - Change the name to some arbitrary other name without trying to leave the domain. Use domain Admin credentials, for some reason this would work while trying to make it a workgroup computer or trying to rejoin the domain directly would not work.

Second - after the name change and reboot, make it a workgroup computer. Again, use domain admin credentials, now that the name has changed that works too. Reboot.

Third - change the name back to the real name and join the domain, again use the domain admin credentials. Reboot.

Beat my head over this for a long time, it never occured to me that just changing the name would be enough to get out of the trap.
 

Read other 1 answers
RELEVANCY SCORE 74.8

We are getting this message when accessing a search page on our SQL server. Any ideas anyone?

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.

/faxmachine_search2.asp, line 5

cheers,
Dan
 

Read other answers
RELEVANCY SCORE 74.8

We have a requirement to get the windows services from one of our remote server. We already have a group with admin rights on that machine and users added to it. But while fetching the services from that details we get below error.
We are using C#.net to fetch the services.
Error:
InvalidOperationException Was caught
Cannot open Service Control Manager on computer :"". This operation might require other privileges.

Read other answers
RELEVANCY SCORE 74.4

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped ... Read more

A:Linked Server from SQL Server 2008 to Access 2000 db gives error

Read other 7 answers
RELEVANCY SCORE 74.4

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 70

Windows 7 client cannot connect to Apple OS 10.2.8 server on our LAN.

A new Windows 7 (PRO) computer was able to connect to our old MAC file server (G4 OS X 10.2.8) over our LAN, but suddenly it will not allow access. We had a shortcut on the desktop and could access files just fine, but then it stopped allowing access (possibly after an WIN 7 update??). I can see the MAC server under Network Connections, click on it and see the group folder we normally connect to, but get this error message when I try to access the folder:
“The server \\ourserver\ is not accessible. You might not have permission to use this network resource. The specified server is not available.”

The Win 7 box can ping the MAC server just fine.
Multiple Windows XP computers connect to and access files on this MAC server with no problems and have done so for years.

All the PC’s on our LAN are in the workgroup “WORKGROUP”. We do not have a Domain.

The MAC server is set with a single group with members that have usernames and passwords. I even set up a new username and password on the MAC server to match the username and password of the user (admin privileges) on the Windows 7 machine. (BTW, I can connect with that new username and password from all our XP machines.)

As far as tweaking settings on this Win 7 machine, I want to be prudent since the machine is correctly connecting to a SQL database running on a Windows 2003 server (using Windows authentication). The Win 7 machine has ODBC by way of “... Read more

Read other answers
RELEVANCY SCORE 70

was trying to network my computer to the server but keep getting the message 'server not responding from client computer' can anyone help please.
 

Read other answers
RELEVANCY SCORE 69.2

Hey Guys,
I'm new to servers and about a week ago I installed server 2008R2 as a standard installation on a Dell Optiplex 780 series. However after activating the Active Dormain Name. I can't seem to see it over the network using a client computer. I also failed to join the domain of the server despite using the same details with the server DNS details and the same gateway.

Please help me

Thanks alot
 

Read other answers
RELEVANCY SCORE 69.2

I'm having trouble getting a computer connected to the server. The server is a Windows2000 and the computer is using Windows XP Home, which I know might be part of the problem.

I setup the workgroup because there is no way to join a domain with XP Home. Now the computer sees the server but cannot access any of the printers or drives on the server.

I'm very new to all this so if you could keep your answers very computer dumbified would be helpful.
 

A:Solved: Computer can see server but can't access it.

"Windows2000" = Windows 2000 Server? Or Windows 2000 Pro? Or something else?
 

Read other 3 answers
RELEVANCY SCORE 69.2

Tried to access a computer from my server site, it all of sudden popped up a window that says i need to login and it says the name of the computer\guest and is looking for a password. none of these are password protected, so where do i click to get rid of that box other than the obvious "X"

A:Tried to access computer from server site

The Guest account should be disabled, and if its not then something is on your machine.

Read other 4 answers
RELEVANCY SCORE 68.4

We have a Windows 7 Pro laptop that can't see any of the 300 or so Windows XP and Windows Server 2003 Machines.

It can, however, see all (around 13) Windows Server 2008 and Windows 7 Machines that are on the network. Using \\ServerName\Share doesn't connect, and they don't show up on the network map.

It can ping the servers though. They ping by hostname and by ip address. Other Windows 7 Pro Laptops don't have this same problem!

Additional Info:
They are all joined to the domain; servers, laptaps, etc.

A:Windows 7 Computer can't see Server 2003 Server

My problem is when i join in 2003 domain server i get the msag

"An attempat to resolve the DNS name of a domain controller in the domain being joined has failed.
Please verf=ify this client is configured to reach a DNS server that can resolve DNS names name in
the target domain. for information about network troubleshooting, see windows help "

tell me what i have to do! 10Q

Read other 1 answers
RELEVANCY SCORE 68

My company is using a Linksys RV016 as our firewall router. We have 3 DSL lines and 1 T1 line connected to the router into DMZ port 1 to 4 as follow:
DMZ 1 - DSL 1 with ip address 60.xx.xxx.xx
DMZ 2 - DSL 2 with ip address 90.xx.xxx.xx
DMZ 3 - DSL 3 with ip address 80.xx.xxx.xx
DMZ 4 - T1 line with ip address 30.xx.xxx.61 ( we get 5 IP address 30.xx.xxx.61 to 30.xx.xxx.65)

All four lines are working properly with no problems.. With our T1 we get 5 IP address so the first was assigned to DMZ 4. So on the System Summary page on the router I see LAN IP and WAN1 throught WAN4 based on the assignment above.

Recently I setup an INTERNAL FTP Server with company internal ip address which I am able to access when I am on the company domain....but I cannot access from outside. After some research I found that from outside computers I am not able to access the FTP server because I need to use a WAN ip address to access the FTP server...I logged into Router and locked the FTP server internal ip address to the WAN4 port and I enabled all port 21 traffic as well...after performing this step I was able to access the FTP Server from outside (my home computer) using FTP Server....However, when I opened web page whatismyipaddress.com on the FTP Server it told me that it is dedicated as a sharing server which I don't want to be flagged since this is ip address for WAN4.

Since I get 5 IP addresses with the T1 line is it possible to configure the Linksys RV016 router to have a second IP... Read more

Read other answers
RELEVANCY SCORE 67.2

Hello,

I have a problem to access file server on Windows Server 2000 from a Windows 7 PC. For your information, due to some reasons, both Windows 7 and Windows Server 2000 are in different domain.

I have tried all suggested solutions which are :
i. to unchecked both attributes in 'Network Security : Minimum session security for NTLM SSP based (including secure RPC)' for both clients and server.
ii. to apply 'Send LM & NTLM - use NTLMv2 session security if negotiated' in 'Network Security : LAN Manager authentication level'
iii. to make sure the time setting for both Windows 7 and Windows Server 2000 are the same.

But still, i couldn't access the file server. In fact, each time I entered domain\username to authenticate, it will give out this message :



Since I am kinda new to this troubleshooting things, it would be great if someone can tell me why does this happening. Is it because of the different domain?

thanks in advance.

A:Windows 7 unable to Access file server on Windows Server 2000

To connect to the server you would need to enter the credentials of the domain user on the server that would have access. For example if the domain was 'home' with a user 'Josh' then I would put:

home\Josh

As the username. If you want to get advanced you could try and form a trust with the other domain in active directory so that the other domain has permission to access the server

Josh

Read other 4 answers
RELEVANCY SCORE 66.8

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 64.8

i have the server with windows 2003 SP1 and i executed replication active directory, domain controller on the new server, as i have two servers. all expect one client computer work ok.onthe problematically computer is with the windows me.
problem is:
when i shut down old server,the computer with win me drop out from domain and he don't see new server.when i power on old server the client computer work ok.i deinstalled the win me on this computer and i installed to him win xp pro but problem is same. this computer don't see new server and he don't see others client computers in network.
what i do?
i tryed to make new user account but nothing i can't because of this computer don't see new server.
on client computer light green indicator on network adapter (Realtek 8139d) all the time.
i use commands: ping with the ip address of server, with the name of server nothing, ipconfig /release, ipconfig /renew, ipconfig /flushdns, ipconfig /registerdns.

ip address of old server is 192.168.0.100 and new server 192.168.0.101.
maybe problem is when i type ipconfig in dosprompt on new server
i receive: DNS server 192.168.0.100 and DHCP 192.168.0.100

plz help me thanks
 

Read other answers
RELEVANCY SCORE 63.6

I have 6 computers in a workgroup that need to be synchronized to a workgroup server.  The server is a virtual Win 7 running on a Windows 10 host.  Neither the server or client computers have internet access.  I started the process by configuring
the host to use its CMOS clock as its time source, which seems to have worked. The client computers are not virtual and can communicate with the Win 10 host as I am able to RDP to the host from the clients.  I made the following registry key changes to
get that accomplished.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config]
"AnnounceFlags"=dword:00000005

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters]
"Type"="NoSync"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient]
"Enabled"=dword:00000000

"SpecialPollTimeRemaining"=hex(7):00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer]
"Enabled"=dword:00000001

<-------End of REG file------->
After applying these changes, I ran the following 'w32tm /config /update /syncfromflags: NO 

I get a message that the command is successful.

These changes are based on the following post:

https://social.technet.microsoft.com/Forums/office/en-US/04865e36-d43d-4167-a07d-9f28fd4f22fa/how-do-you-configure-windows-time-synchro... Read more

Read other answers
RELEVANCY SCORE 62

On Windows7 Pro,  trying to run IIS.  The way I am used to execute is  on the browser "localhost".  I used to have the code in the directory  C:\inetpub\wwwroot.   Even before I copy,  I am hoping to see
the image IIS welcome page.  Once it is successful, want to copy the code as that was the way I used to do in Window XP.    However I am getting the following message.  I have administrator access to the machine and gave full permissions
to the folder  'C:\inetpub\wwwroot'.  Still the same message. 
Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Can someone help me to address this issue.  Thanks a lot in advance. 

A:Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Hi,


You can click the IIS hyperlink in my previous post or using this one

http://forums.iis.net/


Regards,

Vincent Wang
TechNet Community Support

Read other 19 answers
RELEVANCY SCORE 60

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Project Server 2002 lists detailed instructions for configuring Microsoft Project Server 2002 on Windows Server 2003. The SOS lists the steps IT admins must take after setup on both a clean installation of Windows Server 2003 and on upgraded installations.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Project Server 2002
Microsoft Office (download is Microsoft Word file)
http://www.microsoft.com/downloads/...eb-721f-464e-98eb-67029ee81a1f&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 60

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Project Server 2002 lists detailed instructions for configuring Microsoft Project Server 2002 on Windows Server 2003. The SOS lists the steps IT admins must take after setup on both a clean installation of Windows Server 2003 and on upgraded installations.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Project Server 2002
Microsoft Office (download is Microsoft Word file)
http://www.microsoft.com/downloads/...eb-721f-464e-98eb-67029ee81a1f&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 60

Hi,

I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.

Steps taken so far.

Checked and reset permission levels on the share.
Recreated new shares from scratch for testing.
Disabled and enabled offline files on the client computer and cleared the offline cache.
Check various registry entry settings.
Disabled cashing on the File server.
Tested with XP the issue does not exist with XP.

I have spent hours researching this error online to no avail.

The clients are running Windows 7 Enterprise 64 bit
The File server is Server 2003 Standard 32 bit with SP2

Any help or ideas would be most welcome.

A:Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.

I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.

No way for me to recreate this problem but apparently others have the same problem.

Offline created files disappear after re-connect

Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs

Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)

The Group Policy settings in the next link may have an effect on this problem.

http://mcpmag.com/articles/2003/11/0...ine-files.aspx

Read other 3 answers
RELEVANCY SCORE 60

I'm running Remote Server Administration Tools (RSAT) on Windows 7 Professional 64-bit and I've noticed that when I run the DHCP Management tool (DHCPMGMT.MSC) and I add our DHCP Authorised server then close the console, it forgets the DHCP server and I
have to re-select it next time I use the console. 
On the other hand, the DNS console remembers that I've used a particular DNS server even after I close the console.
Wondering why the DHCP Management console is so forgetful?

A:DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

Hi,
This is by design.

Read other 10 answers
RELEVANCY SCORE 60

i am having microsoft windows server 2003 for small business server Service Pack 1.iwant to run an application build up with ASP.NET & SQL DATABASE.for generating reports we are using crystal reports.
while running the application i am gettig an error message as

File or assembly name CrystalDecisions.Web, or one of its dependencies, was not found.

i tried to copy all the dll files in to the bin folder.still the problem is not solved..
Source Error:
Line 13: debugging ASP.NET files.
Line 14: -->
Line 15: <compilation defaultLanguage="c#" debug="true"><assemblies><add assembly="CrystalDecisions.CrystalReports.Engine, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportSource, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Shared, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Web, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></assemblies></compilation>
Line 16:
Line 17: <!-- CUSTOM ERROR MESSAGES
Source File: C:\Inetpub\wwwroot\HomagIndiaCIS\web.config Line: 15

Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = ... Read more

Read other answers
RELEVANCY SCORE 60

Hey All,

I am working on a server and recently two of their mail accounts have began not sending out email. When I first looked into the outbound box, the mail I sent out is still pending. It usually takes anywhere from 1 minute to several hours to for it (Argosoft Outbox) to be delivered. Also, when I send out a email to that particular a particular address, it will just sit there.

I have also done scans with AVG 8.0 and found that it had I-Worm/Bagz.D infection. I quickly quarantined that infection as to not allow to infect other files on the pc / server. I have also done a Hijack This Scan, please can someone look at this and tell some about what I am making out.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:59:54 PM, on 9/30/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\inetsrv\inetinfo.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\LogMeIn\x86\LogMeInSystray.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\LogMeIn\x86\LMIGuardian.exe
C:\Program Files\Common Files\Microsoft Shared\Works Shared\wkcalrem.exe
d:\Program Files\ArGo Soft... Read more

A:Solved: Working on server (mail, ArgoSoft Email Server) and does not send emails out

I have decided to close this as email service is being moved to a off site location and that also no one has responded to it. I am grateful to anyone who has looked at it and appreciate your time in looking at.

Thank you very much.
 

Read other 1 answers
RELEVANCY SCORE 60

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 60

Hiya

Emergency Management Services is a new feature in Microsoft Windows Server 2003 that supports remote management and system recovery for servers that are not accessible through a conventional connection. By using Emergency Management Services with other software and hardware components, you can remotely perform tasks such as recovering unresponsive servers and powering servers off and on, even when they are not accessible through a standard network connection. Emergency management services also supports headless servers—those without a local keyboard, monitor, or mouse. This document provides an overview of Emergency Management Services and its components. It explains how to choose and configure hardware and software that supports Emergency Management Services. It provides guidance for enabling Emergency Management Services, and information about using this technology to troubleshoot problems with remote servers.
System Requirements
Supported Operating Systems: Windows Server 2003

Only servers running a Windows Server 2003 operating system can be monitored using Emergency Management Services. For additional hardware and software requirements, please consult the chapter.

http://www.microsoft.com/downloads/...a6-97d2-448c-a0dd-4cfaa0be7d14&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 60

I don't know if this is help for our server or Excel I am looking for. Here is the issue...

Whenever one lady is logged into a session on our server, she opens a word document that has an Excel worksheet embedded in it. The second she tries to click on the Excel worksheet, Dr. Watson makes a call and hits me with the following message...

Error in Excel.exe
Access Violation (0xC0000005), Address: 0x304632a3



When she tries to just open the Excel program, she gets this error:

Compile Error in Hidden Module: ThisWorkBook

This only happens to her, should I make a new profile on the server for her? Is there something in Excel I can do? I am so lost and MS Knowledge base has been of no help to me.
 

A:Excel Shutting Down on Windows NT Server (Terminal Server, Citrix Metaframe)

Try this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q169718

And this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q172211

Or look here for more, http://search.support.microsoft.com...Type=ALL&maxResults=150&Titles=false&numDays=
 

Read other 2 answers
RELEVANCY SCORE 60

Hi there,

I've worked for a long time with xampp on Windows and never had this problem.

I try to access PHPmyAdmin and this error message appears:
HTML:
#2002 - The server is not responding (or the local MySQL server's socket is not correctly configured)
Why?

Thanks
 

A:XAMPP - #2002 - The server is not responding (or the local MySQL server's socket is n

Read other 8 answers
RELEVANCY SCORE 60

I have 2 servers; windows 2000 & windows 2008, I can always access them via XP but my system 7 home can't authenticate. It appears to add the domain name as a preamble my user name in the authentication....does this make sense?


thank
-Jeff

Read other answers
RELEVANCY SCORE 60

Currently we are on an NT network with a few 2000 servers tossed in. Today I learned that the plan is to migrate everything to Linux. Lets assume that this only applies to the servers and that the users will still operate with 98/nt/2000/xp. What are your thoughts on this?

I put this in this forum for a reason. Because I'd rather get the advice from 2000 and 2003 experts who know what Linux cannot replace than to hear the Linux fanboys and anti-Microsoft activists praise it to the high heavens.

What would your concerns be if this was done on your network? What problems have you encountered if you'd tried this? Or what successes? Know of any businesses that have done this successfully?
 

A:Is Linux ready to replace Windows 2000 server and 2003 server?

Read other 9 answers
RELEVANCY SCORE 60

Hello All,

I want to dual boot XP Pro , 2000 Server and 2003 Server and wanted to check the best order to instal these OS's?

Can anyone help?
 

Read other answers
RELEVANCY SCORE 60

There is a process running on my computer called csrss.exe
 
I went to http://www.processlibrary.com and looked it up and came up with 2 different things. One says it is a Trojan and needs to be removed. The same exact process name also says it is Microsoft client server runtime server and SHOULD NOT be removed.
 
How I am supposed to tell the difference so I do not make a mistake by either leaving it alone or removing it???

A:Process: csrss.exe (trojan or Microsoft Client Server Runtime Server?)

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/561994 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 60

Just bought 2 new Intel S5000VSA server boards, After building both Pcs using the Intel disc that came with board and even the win 2003 setup disc directly I cant seem to install windows server 2003 without receiving a BSOD during setup. All Hardware is compliant with the board. Please Help
 

A:Cant install Windows Server 2003 on Intel s5000vsa server board

Strip the system down. One memory stick, no USB devices, on-board video and sound, no sound card and try the OS install again. Reset the bios to failsafe defaults
 

Read other 2 answers
RELEVANCY SCORE 60

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 60

Hiya

Proxy Server 2.0 is not compatible with computers running Windows Server 2003. The Proxy Server client is compatible with computers running Windows Server 2003.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Proxy Server 2.0
http://www.microsoft.com/downloads/...f7-b55c-4acd-8167-1923402a9703&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 60

Hiya

Microsoft Content Management Server (MCMS) 2001 is a .Net Enterprise
Server product that simplifies developing and managing e-business
web sites. Microsoft has learned of three security vulnerabilities
affecting it:

- A buffer overrun in a low-level function that performs user
authentication. At least one web page included with MCMS 2001
passes inputs directly to the function, thereby potentially
providing a way for an attacker to overrun the buffer. The
result of exploiting the vulnerability would be to either
cause MCMS to fail, or run code in the context of the MCMS
service (which runs as Local System).

- A vulnerability resulting from the confluence of two flaws
affecting a function that allows files to be uploaded to the
server. The first flaw lies in how the function authenticates
requests, and would allow any user to submit an upload request.
The second results because it is possible to override the upload
location; where the function should upload files to a folder that
only privileged users can access, it can be overridden to upload
it to a temporary folder that does allow unprivileged users to
call it. By exploiting the two flaws in tandem, an attacker
could upload an .ASP or other file to the server, in a location
from which it could be executed.

- A SQL injection vulnerability affecting a function that services
requests for image files and other resources. Exploiting the
vulnerability could enable an attacker to run SQL commands on the
server, which wou... Read more

Read other answers
RELEVANCY SCORE 60

Can anyone help me with setting up this network layout with my Pix Firewall.
Network Layout : Pix > DMZ > ISA Server 2004 > Exchange Server 2003 + Users.

Pix outside IP Address : 65.77.78.47 255.255.255.0
Pix inside IP Address : 172.17.0.1 255.255.0.0
DMZ IP Addresss : 172.18.0.3 255.255.0.0
ISA Server outside IP : 172.18.0.2 255.255.0.0
ISA Server inside IP : 172.18.0.1 255.255.0.0

I've identified the interfaces IP Address and named all plus the following config:

global (outside) 1 interface

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

nat (dmz) 1 0.0.0.0 0.0.0.0 0 0

conduit permit icmp any any

route outside 0.0.0.0 0.0.0.0 65.77.78.1 1

I can now access the internet from my ISA Server in the DMZ zone.
I am intending to put the ISA Server out on the DMZ to access the outside world with

static (dmz,outside) 172.18.0.2 65.77.78.47 netmask 255.255.255.255 0 0

and then open all traffic to ISA with

access-list acl_out permit ip any host 65.77.78.47 255.255.255.255 any
access-group acl_out in interface outside

then I’ll give ISA server access to the inside network with

access-list acl_dmz permit tcp 172.18.0.1 255.255.0.0 172.17.0.2 255.255.0.0 eq 25
access-group acl_dmz in interface dmz

With the above commands, the first access-list acl_out was not accepted by pix plus the second access-list acl_dmz so if you could please share some light upon my configurations.

Regards,
Semisi
 

A:Setting up Pix 515E in front of ISA Server 2004 and Exchange Server 2003

Here, I scrapped your config. NAT bad/static bad/conduit bad/access-list bad.

no fixup protocol smtp
nameif int xxx outside security 0
nameif int xxx inside security 100
nameif int xxx dmz security 80
icmp permit any outside echo-reply
icmp permit any outside unreachable
icmp permit any inside
icmp permit any dmz
global (outside) 1 int
nat (inside) 1 172.17.0.0 255.255.0.0 32768 16483
route outside 0.0.0.0 0.0.0.0 65.77.78.1 1
static (inside,dmz) 172.17.0.0 172.17.0.0 255.255.0.0
static (dmz,outside) 172.18.0.2 65.77.78.48 netmask 255.255.255.255 << Can't have same IP as interface**
access-list internet permit tcp any host 65.77.78.48 eq 80
access-list internet permit tcp any host 65.77.78.48 eq 443
access-list internet permit tcp any host 65.77.78.48 eq 25
access-list internet permit icmp any any eq echo
access-list internet permit icmp any any eq echo-reply
access-list internet permit icmp any any eq unreachable
access-list internet permit icmp any any eq source-quench
access-group internet in interface outside
access-list dmz permit ip host 172.18.0.2 any << *Read note 1
access-group dmz in interface dmz
access-list inside permit ip any any
access-group inside in interface inside

The above config will nat 172.18.0.2 to 65.77.78.48. You can't static NAT an entire IP to the same as a global (your interface). You can only do this if you NAT specific ports.

The above config will allow internet to reach 65.77.78.48 via TCP 80/443/25. I can only assume y... Read more

Read other 1 answers