Over 1 million tech questions and answers.

Router has slow performance vs. direct modem connection

Q: Router has slow performance vs. direct modem connection

My ISP is Comcast and I am subscribed to a 12mbps download and a 2.5mbps upload. When I am directly connected to my modem I get around 13-30mbps (Yeah I know, I get more than what I pay for!)
However, when downloading files through my router my max download speed is 750-770 kb/s.

I am running Windows 7 Home Premium x64.

I have tried this with a Linksys WRT320N and a Netgear RangeMAX (forget model) and SAME RESULTS!!!!

I am very familiar with the menus of both.

So, is there anything I can do to unlock the true potential of my speed through my router/s?

*Added note: I have tested my router via ethernet and wireless. Same performance.

I know 750 kb/s isn't bad. In fact it is perfectly liveable.

Weird note: via speedtest.net the router and modem get the same speed. But, when I try downloading via P2P, Steam, random file sharing website; the modem outperforms every time.

Thanks for the help! My first post on techguy.org!

RELEVANCY SCORE 200
Preferred Solution: Router has slow performance vs. direct modem connection

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Router has slow performance vs. direct modem connection

Read other 16 answers
RELEVANCY SCORE 85.6

Within the last week I've been getting very slow speeds through my Asus RT-AC66U when connected to either ethernet or wireless on Windows 10 devices. I'm usually seeing speeds over 20 mbps up to 25. Now the speeds are around 1-2 mbps, or less. Uploads are in the low 10ths of a mbps.
To troubleshoot I connected my laptop directly to the Motorola SB6121 modem via ethernet cable and the speeds were 20-25 mbps as expected. When I connected modem back to the AC66U I get 1-2 mbps. I reset the Asus router and restarted modem-then router- then laptop. Result = same poor speeds. Today I connected a spare Linksys 4200V2 to the modem and ethernet to my laptop and get the same poor speeds 1-2 mbps.
The equipment chains is: Internet to modem - modem to router - router to PC and to an ethernet switch feeding numerous devices. The router also wirelessly feeds phones, tablets and a couple streaming boxes.
The curious thing here is that my laptop with ethernet and my wife's with wireless both running Windows 10 are very slow. My Tablet running Android (CM 12.1, 5.0 ghz connection) wirelessly from the modem is testing at 24 mbps.
I'm at the end of my troubleshooting skills with this problem. The routers have the latest firmware. The Asus does have the Merlin software on it and has worked flawlessly in the past. Lastly, I did change the modem to router cable and tested on a modem to laptop and both cables are fine.
Has Microsoft made changes with the last Windows 10 updat... Read more

Read other answers
RELEVANCY SCORE 68.8

I want to create a connection between my Vista and my 98se with their modems. In lieu of that, I want to at least be able to connect the two of them for old dos games that I like to play. How do I find out what number my modem is supposed to dial? Or, am I not thinking correctly?
 

A:Direct Modem Connection

Read other 6 answers
RELEVANCY SCORE 68.4

As long as my PC is connected to my dsl modem directly, I have Internet access. As soon as I try inserting a router into the mix, I lose all Internet connection.

I initially thought something had gone wrong with my router; so, I purchased a new one and still I am receiving the same problem. I have done numerous power cycles and tried reconnecting everything was connected properly: pc>router>modem>phone line.

I deactivated my firewall thinking that was the problem, but nothing changed.

I am not sure what else to try. I guess the plus side is that I do have access to the Internet, but would love to get the router working in order to use our laptops and phones and other devices with wifi.

I did perform this task. However, it was performed while I am only connected to my dsl modem and not the router.
Windows IP Configuration

Host Name . . . . . . . . . . . . : King-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : launchmodem.com

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : launchmodem.com
Description . . . . . . . . . . . : Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
Physical Address. . . . . . . . . : E8-40-F2-A6-2F-EF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::6cda:170d:5979:b452%13(Prefer... Read more

A:No internet with router but connects with a direct connect to dsl modem

Read other 6 answers
RELEVANCY SCORE 67.2

Could u please check my computer, it recently had a backdoor trojan and a google redirect virus which i had been able to eliminate with malwarebyte but my computer still seems to run slow. Thanks. Also i have not been able to post the gmer log as everytime i scan my computer with it, it crashes. Is there any other program that could do the job.
DDS (Ver_10-11-27.01) - NTFSx86
Run by Charles at 17:49:32.67 on Thu 02/12/2010
Internet Explorer: 8.0.6001.18813 BrowserJavaVersion: 1.6.0_17
Microsoft? Windows Vista? Business 6.0.6002.2.1252.61.1033.18.3326.2303 [GMT 11:00]

SP: Spybot - Search and Destroy *disabled* (Outdated) {ED588FAF-1B8F-43B4-ACA8-8E3C85DADBE9}
SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Windo... Read more

A:google direct virus slow performance

Hi

Please do the following:

Scan With RootKitUnHooker
Please Download Rootkit Unhooker and save it to your desktop.
Now double-click on RKUnhookerLE.exe to run it.
Click the Report tab, then click Scan.
Check (Tick) Drivers and Stealth
Uncheck the rest. then click OK
When prompted to Select Disks for Scan, make sure C:\ is checked and click OK
Wait till the scanner has finished and then click File > Save Report.
Save the report somewhere where you can find it. Click Close.
Copy the entire contents of the report and paste it in your next reply.

Note** you may get the following warning, just click OK and continue.

"Rootkit Unhooker has detected a parasite inside itself!
It is recommended to remove parasite, okay?"

Read other 6 answers
RELEVANCY SCORE 67.2

When using something like google and clicking on a search link i get re-directed to a variety of different search engines, or if a browser is open on anypage then a new tab opens with garbage like "work from home and get $350 per hour".Have run Spybot S&D, Adaware, and full scan using Kaspersky still it happens.DDS log belowMany ThanksDDS (Ver_10-03-17.01) - NTFSx86 Run by Kev at 16:26:32.52 on 30/05/2010Internet Explorer: 8.0.6001.18828 BrowserJavaVersion: 1.6.0_20Microsoft? Windows Vista? Home Basic 6.0.6002.2.1252.44.1033.18.2038.784 [GMT 1:00]SP: Spybot - Search and Destroy *disabled* (Updated) {ED588FAF-1B8F-43B4-ACA8-8E3C85DADBE9}SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}============== Running Processes ===============C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\svchost.exe -k rpcssC:\Windows\System32\svchost.exe -k secsvcsC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\Windows\System32\svchost.exe -k LocalSystemNetworkRestrictedC:\Windows\system32\svchost.exe -k GPSvcGroupC:\Windows\system32\SLsvc.exeC:\Windows\system32\svchost.exe -k LocalServiceC:\Windows\system32\svchost.exe -k NetworkServiceC:\Program Files\ASUS\ASUS Data Security Mana... Read more

A:Browser re-direct and slow system performance

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 14 answers
RELEVANCY SCORE 66.4

Hi all

I recently had a problem with the internet connection in our office. During the process I connected to the cable modem directly and so did one of my collegues. Since then both our computers are taking ages (3-4mins) to boot. It gets past the welcome screen and then hangs with no activity light flashing for about 3 mins then starts to boot into the desktop. Once fully booteed I have no problems.

Anyone had a similar exprerience? If so any solutions!!!

cheers

Russ Clarke
Dell Precision M90
T2600 @ 2.16GHZ
XP Pro
2GB RAM
NVIDIA Quadro FX2500M
 

A:Long XP boot after direct connection to cable modem

Read other 6 answers
RELEVANCY SCORE 65.2

just got my DSL line connected this week. having trouble with connections using my office laptop (os --windows NT). when i connect direct from the modem i always get "unable to resolve ur IP address ..." message. pls note my laptop is set up as such, i need to go thru VPN everytime i need to connect either thru dial up or DSL. laptop is configured that by my employer that way for security purposes. and since i'm not the administrator i can not install any new drivers (i.e., dialer) to recognize the modem. do i need a router? was able to connect from friends' houses with routers.

it works fine with my other PC (os --windows XP)

do i need one or will a direct crossover connection do the job?

also thinking of a direct crossover connection from my XP PC to my NT notebook. is this possible? got this from XP help & support center:

The Network Setup Wizard can only be run on computers running Windows 98, Windows 98 Second Edition, Windows Millennium Edition, Windows XP Home Edition, Windows XP Professional, or Microsoft Windows XP Service Pack 2 (SP2).

appreciate simple and detailed steps not that computer savy. thanks.
 

A:router vs direct crossover connection

yes you can connect via a crossover cable -
i have had NT4SP3 - win98 - win2k and winXp all working with a crossover connection

now to your other problem
i suspect you company has given you a fixed IP and you may be on dhcp
or the other way round

goto
start
run
cmd
ipconfig /all
and post results
 

Read other 3 answers
RELEVANCY SCORE 65.2

I have an Apple Macbook with the Tiger OS and have previously configured a D-Link router for wireless access. The router was cofigured when I was using a cable internet connection, so the cable modem was between the router and the cable connection.

I now have a direct network connection through my university (i.e., no cable or DSL modem). I have been unable to get the wired or wireless internet connection to work with the router. I can connect my Mackbook directly to the ethernet network connection and get access to the internet. However, when I try to connect the router between the computer and the direct network connection, the internet won't work.

As you can guess I am not a computer wiz and am a novice using wireless routers. Can anyone advise me on how to successfully connect my wireless router between my direct network connection and the Mackbook? Also, if there is a better section of the forum where I should be posting this thread, please let me know that. Thanks.
 

A:Use of Router with Direct Internet Connection

Read other 7 answers
RELEVANCY SCORE 65.2

Hi there, this is my first post, but i've had this problem for a while

im running a basic wireless connection throughout my house, however my pc is plugged directly to belkin router.
fairly often (and more so when i'm connected) the internet sort of dies, the little connection image in the corner goes blank, features such as msn will sign out and we need to flick the power to modem/router on and off.

that aside (an annoying, but manageable problem) the connection will often not work sporadically while using the net - however this issue lets msn and other programs run, just stops firefox (giving me errors like 'server not found', 'server timed out' etc etc)
At any point in time if i repair the connection it stops at clearing net bt and says the action could not be completed.

was wondering if these problems are linked, but if not, i would like to be able to clear net bt first, as this may be a clue to the other problems.

thanks for any advice
 

A:Direct connection to router has problems

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.
 

Read other 2 answers
RELEVANCY SCORE 64.8

Im currently using a usb cable to connect to my comcast ambit cable modem. anyways... when I try to plug in my ethernet cable... I cannot/or do not know how to obtain an ip using win2k advanced server.

My broadcom ethernet driver is ok.
and yes.. when Im trying to use ethernet... of course i disable the usb internet connection.

Ive tried this before, and had the same problem with win2003 server on a home pc.

I dont have active directory, or a dns server configured on this machine (dont need to use these features).

Any ideas would be great... thanks!!!
 

A:Solved: win2k server, direct cable modem connection (ethernet) no ip!!! 0.0.0.0

Did you power cycle the modem after changing the connection from USB to Ethernet? If not, that's the problem.
 

Read other 2 answers
RELEVANCY SCORE 64.4

Hello all,first let me start by saying i am no expert in networking and my english is not perfect.

I'll keep this as simple as i can with the way i describe it. I have been using a router for a couple of years for my internet connection and it latetly it has given me problems,random dc,random reset. I now wish to go back to a direct cable connection in my PC,and stop using the router.

However,if i plug it in the cable i do not have internet connection. I have tried to setup the IP and DNS adress to obtain it automatically ,i have typed them in manually and still it won't work.

The main things it keeps telling me when i run the Troubleshoot tool are :

- The Default Gateway is not available
- Windows can't communicate with the device or resource ( primary DNS server )

If you require any more info and want to give me a hand with fixing this info,please ask. Thanks for your time.
 

A:Direct cable connection won't work yet Router does.

Read other 9 answers
RELEVANCY SCORE 64.4

I'm not to sure exactly what i need to do... I'm trying to play Civilization 4 Beyond the sword with a friend. So i set up a direct ip game, but he can't join. How do i setup my router to let him join?
 

A:How to set up router for a direct ip connection Port fowarding maybe IDK...

oh btw its a WRT54G Linksys router.
 

Read other 2 answers
RELEVANCY SCORE 63.6

Hi.

Currently my housemate and I are having problems with our internet connection. We are sharing our broadband connection across two computers by both directly connecting to a router. The problem is as such, my housemate can safely connect to the router and his internet functions as normal. However, when I turn my computer on and try to establish an internet connection, the connection fails after a minute or so. My housemates connection also dies when my one does. So by attempting to connect to the internet, i basically cause both connections to crash. Also, when i turn my computer on, the internet will work for a brief moment (perhaps one minute) before it dies. Bascially i have time to visit one or two internet sites before it craps itself.

Neither of us have much understanding of what is going on. We both believe it may be a software issue with my computer which is causing the problem (ie spyware or some kind of virus). Given that i am essentially operating without a stable connection i cannot update my adaware definitions or the likes. Thus far all i have done is run an adaware check which found nothing malicious. My computer operates windows XP.

Any help with this matter would be greatly appreciated.

Cheers,
 

A:Direct router connection dying when second computer logs on

Can you connect without his computer being connected? When one of the computers is connected, let's see this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.
 

Read other 1 answers
RELEVANCY SCORE 63.2

I need a direct connection to the internet. A connection straight from the modem to the computer with no routers involved. I am able to connect to the internet using my router (wired, not wireless). However if I try to connect directly to the internet through the modem it doesn't work. I have a broadband connection, always running. I don't understand the problem. Why would connecting through a router work but a direct connection fail? I tried power cycling the modem about 10 times and it's not working. Yet it will connect through the router every time without fail. Is there some kind of configuration I need to change? Any help would be appreciated.

I'm running windows xp and my ISP is comcast.
 

A:Connecting through router works, direct internet connection fails

Read other 7 answers
RELEVANCY SCORE 62.4

Hello!

I have D-Link DSL 320T ADSL Modem and Belkin N+ Wireless Router.
The modem works great on its own connected to the network card in my laptop.
The problem starts when I connect it to the router (doesn't matter wired or wireless connection). The internet works but slower and sort of 'snaps' every few seconds. To give you an example, when I use skype the sound and picture freezes every few seconds or when I click on different websites in my browser, every few seconds I get the 'not connected to the interent' screen - I have to refresh and it loads fine.
All those problems dissapear when I connect the modem to the network card of my laptop.
I tried few things and this is what I found out:
1. When I switch the router into Access Point mode it works great (wired and wireless) as if it the modem was connected straight to my laptop - no snaps, skype works great.
2. It doesn't help when I turn the firewall off in the router
3. It doesn't help when the QoS option is enabled
4. The router is fine as it works great with cable modem

I think maybe there is something wrong because of DHCP option enabled in both devices.

Here is my ADSL Modem Config
DHCP ON
Starting IP 192.168.1.2
Ending IP 192.168.1.254
Subnet mask 255.255.255.0

Here is my router config
DHCP ON
Starting IP 192.168.2.2
Ending IP 192.168.2.100
Subnet mask 255.255.255.0

Please Help
 

A:D-Link DSL320-T ADSL Modem + Belkin N+ Wireless Router Internet Performance Problem

Read other 16 answers
RELEVANCY SCORE 61.6

I switched to a wireless Linksys router from a crossover cable connection, and now file/printer sharing on my XP + Vista network isn't working. They can ping each other by ip address (not by name), and I've turned off firewalls, and the XP machine can see the Vista machine but not vice versa. Does anyone have any idea what I can try here? Thank you.
 

A:Solved: Switched from direct connection to wireless router, sharing no longer works

Read other 8 answers
RELEVANCY SCORE 61.2

After latest update on Windows 10 Sunday 4th Nov 2018 my wifi is slow and I cannot get online. Error shows Check Proxy server and firewall. Uninstalled all firewall programs. Also message says check for windows network diagnose. When running this it works, but have to do same procedure every time. How can I fix? Have downloaded new drivers from this page but did not fix problems. 

Read other answers
RELEVANCY SCORE 60.4

Hi,

I have an unsolvable problem with my router that results in random disconnects from Xbox Live. I want the 360 to bypass my router by plugging it directly into my modem. Is the correct solution to buy an ethernet network switch hub, plug this into the modem and then plug the router and 360 into the hub? Can anyone please advise what I should be using?

Thanks in advance.
 

A:Modem Connection to 360 and router

no that's not correct. you must use modem--router--otherstuff unless
you want to ONLY use modem--one.box
 

Read other 3 answers
RELEVANCY SCORE 60.4

For work I was given a modem, which they wanted me to hook up directly to my home internet. However, I live in a town home and do not have direct access to it. Instead I have to use a port that I have in my wall. When I plug my modem into the wall the VPN does not light on the modem, which I assume is because I have blocked access as we need to register all our devices using the MAC address. The modem I have is a Cisco 881. Is there any way to find the MAC address if not listed on the device itself?
 

Read other answers
RELEVANCY SCORE 60.4

I just set up a two computer wireless LAN. One machine running WinME is wired to the router, the other W2K machine is wireless about 100 feet away.

Everything works well, I can shut both machines down and restart and it all still works.

However, after shutting down the machines over night and restarting in the morning, the router won't respond. I can't access the router with IE. If I shut down both the modem and router and the machines and reboot the modem then router then the machines it'll work.

On all the other networks I've dealt with, the modems and routers are always left on.

What should I be checking here? Up till now I've never had any problems with this type of setup.

The modem is a Qwest issue Actiontec GT701 while the router is a Linksys wireless 11MB.

TIA
 

A:DSL modem/router connection

It would be helpful to determine if the problem is with the modem or the router.

Can you disconnect the router and connect directly to the modem.
Then leave that computer on overnight.

If there are still problems it would point to the modem.
Otherwise I would start suspecting the router.
 

Read other 3 answers
RELEVANCY SCORE 60

Hi,

I've a problem with network routing which is beginning to drive me crazy!

I basically have two PCs, one which is running Windows XP Pro, and another which is running Ubuntu 7.10. Both have USB wireless adapters connected to them, plus a crossover ethernet cable attached to their ethernet network interfaces linking the two machines together.

My end result is to have any traffic between these two machines travel over the ethernet interfaces, but any other network traffic to travel over the wireless interfaces. To simplify things for the time being, I have downed both of the wireless interfaces and am concentrating solely on the ethernet connection (192.168.0.20 (Windows) and 192.168.0.21 (Linux)).

I have Samba installed upon the linux box to export a directory which is then mapped within XP to a particular driver letter. Unfortunately, copying any files from the linux box over to the Windows box takes absolutely ages - for example a 52MB directory is taking roughly 150 seconds to transfer!

I have attempted to setup the networking routes for this connection but from that very slow transfer time I'm guessing that I've done something wrong. If someone could take a look at the details below and point out any obvious problems, or if they have any suggestions as to something else that could be causing the delay, then that would be very helpful.

Thanks, Neil
Code:
C:\Documents and Settings\Neil> ipconfig

Windows IP Configuration


Ethernet adapter... Read more

Read other answers
RELEVANCY SCORE 60

First, thank you for everybody who will take a time to help me.

After power outrage, I cannot set up my modem+router internet connection. I've restarted both several of times, different cable configuration with no luck. I will post my ipconfig /all, first is with router so no connection:
C:\Users\a>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : a-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : C8-60-00-68-40-B5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ddaa:363e:abc5:5636%12(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.86.54(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 264790016
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-0A-72-00-C8-60-00-68-40-B5

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

This one is without router connected, so only modem and I have connection.

C:\Users\a>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : a-PC
Primary Dns S... Read more

A:No Internet connection modem+router

Read other 12 answers
RELEVANCY SCORE 60

Hi everyone.

I work as a tech consultant, and I am stumped on this one.

I am working at a clients house. She has purchased DSL sevice though a hole-in-the-wall company called superpa.net.

They have given me particular parameters to make the computer connect to their POS system.

Set IP Address: 192.168.1.3
Set Default Gateway: 192.168.1.1
Subnet Mask: 255.255.255.0
Preferred DNS Server: 63.169.216.98 alternate 204.117.214.10
Well that is all fine a good and the computer connects just great. But my client just bought a new laptop and wants wireless. Wireless is simple, well it should be.

I got her a basic Linksys Wireless-G WRT54G Router. Nothing Fancy.

Now obviously, the router must use the same setting as the computer. So I went in to the Config, and made it a static ip with all of the listed above. I changed the computer back to the auto obtain ip address and dns server, but I HAVE NOTHING!

The modem shows a conncetion to the router, and her computer shows a connection the router, but there is NO activity between the modem and router. No activity=No Internet
I called Linksys, they told me to contact my ISP, then called Superpa.net, they said they dont do any support for wireless, only for one hardlined computer. They would sent someone out to fix it $200/service call + $60/hour... I said forget it.

Anyone with any suggestions or solutions... I would be much abliged!!!!

Thanks,
Chris
 

A:Router DSL modem connection problems

I trust that you power cycled the modem when switching from computer to router.

If the Linksys LAN defaults to 192.168.1.x, change it to 192.168.0.x.

EDIT: and clone the computer's MAC address to the router.
 

Read other 3 answers
RELEVANCY SCORE 60

Tried searching for a solution but couldn't find anything specific enough to my issue.

Any help is greatly appreciated; wired network connections.

ISSUE:
As of right now, I am able to connect to the internet but only directly from my modem to my main desktop. When I have the router connected... there is no network connection on anything connected to router, not even my main desktop. I then started to see if other devices such as PS3 and laptop would work connected directly to modem. No connection can be made; however, everything shows pc activity. The only connection i get to work is when my main desktop is connected directly to the modem. I believe it is a network settings issue, involving router and/or modem. I've tried doing the whole reset router/modem/pc, and disconnecting reconnecting cables solutions but nothing.

Thanks again for any responses and help.
 

A:Connection to Router/ Modem issues...

Read other 6 answers
RELEVANCY SCORE 60

SBC sent me a Westell Proline F90-610025-06 modem/router for my new DSL account. It works fine on one computer, but when I connected it to a second computer through a Linksys switch (ethernet cables), the second computer was not able to obtain a different local IP number from the Westell. Both computers show a address conflict error when they are both on. I pushed the buttons in the advanced section of the Westell menu, but could not find any way to expand the range of IP addresses available. The only option I could find was to change the lease time on IP addresses, or switch from PPPoE to PPPoA. I pushed repair connection in the computer LAN menu, but the computer was not able to get a different IP address. The Westell just kept giving both computers the same IP. This is my first broadband connection, so I am an amateur on connecting them.

Windows XP SP2 I tried powering everything down, and restarting in this order: Westell, Linksys, computers It didn't help. Manually inputting a different IP address on one computer's LAN connection didn't do anything either. How do I get the Westell to give different local IP addresses to different computers?
 

A:Solved: Modem/Router Connection

Read other 16 answers
RELEVANCY SCORE 60

I can connect to the internet just fine if I run my modem straight to my computer. If I try to run it through my router, however, I can't get a connection. The internet light on the router does not light up and shows no signs of connection. The DHCP renewal doesn't do anything, either. I have tried multiple 'solutions' and am completely stumped. I have power cycled many, many times and reset the router to factory settings as well. I have tried cloning the mac address to match the computer and done all that I can (as far as my knowledge reaches). The tech support 'warranty' is also outdated, so there are no other options except for paying a ridiculous amount of money to talk to somebody. As such, any help on this matter would be GREATLY appreciated! I just got a new modem yesterday and that is when it stopped working through the router. This problem occurs with two different routers (both of which worked previously) so I don't think anything is faulty.

The modem is an ARRIS TM602G and the router is a Linksys WRT54G v.3

I will provide as much information as I can on request! I desperately need to resolve this issue.
==================
MODEM (WITHOUT ROUTER)
==================

Host Name . . . . . . . . . . . . : Steez-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : neo.rr.com

Ethernet adapter Loc... Read more

A:Router won't pick up connection from modem

You're sure you are connecting the modem to the router's WAN port?

TCP/IP stack repair options for use with Vista or 7.

Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.
 

Read other 1 answers
RELEVANCY SCORE 60

I am having a confusing and frustrating problem, my internet connection is dropping every half hour at least (sometimes more depending on my internet activity). This connection loss is happening when my modem resets and I have no idea why it's resetting. It may be due to some issue with my ISP where I don't have enough bandwidth to spare and I need to upgrade. i'm not sure. (I have Comcast high speed standard package) I am a gamer and I tend to have multiple applications running at a time, I play competitive online games and sometimes I stream music when I play. I also sometimes watch a live stream or YouTube video on my second monitor although it is usually not while I am gaming. I have tried everything I can think of.. I have called Comcast several times and called the companies of my router and my modem, and I have had a Comcast technician come and inspect the my cables inside and outside of my house. I am honestly at my wit's end and I need help..

My modem and router are both new and I highly doubt that is the issue:
Although maybe it is a problem with the modem and router communicating? I don't know.
Here are the models:
Motorola Surfboard SB6121
Belkin N600 DB Wireless N+ Router

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 965 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce GTX... Read more

A:Intermittent connection please help modem/router/isp??

Bump
 

Read other 2 answers
RELEVANCY SCORE 59.6

For the past two weeks I keep getting the error message of "Default Gateway is not available," only way to temporarily fix it has been to restart the computer each time. The intervals of the net crashes can range from 3-7 hours of connect time to even just five minutes after fixing the issue. I've called my ISP (Charter Communications) and they claim it is not an issue on their end and must be with my computer. The Computer was bought in Nov. 2011 and is a Gateway DX4860. Any help out there would be much appreciated.
 

A:"Default Gateway is not Available" with Direct connection to cable modem

would you post the following tests when its working OK and then repeat ALL the tests when it disconnects and make sure you also tells which tests posted are for what condition

if you are also connected by wireless include the xirrus screen shots

Please post back here the make and exact model of the router and if separate, the make and exact model of the modem

Also please make a note of the status of the light on the modem and on the router when working normally - post back here and then when disconnected post the status of the lights here again if changed

What firewall or security suite do you currently have on the PC - or ever had in the past - any trial ware - like Norton, Mcafee , AVG etc

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export th... Read more

Read other 1 answers
RELEVANCY SCORE 59.2

OK, here's the situation. I have a Dell E1505 laptop with Windows Vista that I use as my main computer. I am connected to the internet with a 2wire2701HG-T router/modem. I just bought a Acer Aspire One D250 with Windows 7 Starter and connected it wirelessly to the network. Now, however, when the Dell is connected to the modem by ethernet, my preferred connection for security, speed, and battery issues, the internet connection on the Acer slows down to nothing and soon disconnects. After a bit, it reconnects, but is still very slow, only to disconnect again. However, when I connect the Dell by wireless, everything works normally. Is this a modem problem, or is it an issue with one of the computers? I must admit, my networking skills don't go beyond being able to set up a network name and password.
 

A:Wireless connection on 2Wire modem/router

i think we saw an issue recently with a cordless phone base station being next to the modem/router
http://forums.techguy.org/networking/972395-wireless-connection-issues.html
 

Read other 1 answers
RELEVANCY SCORE 59.2

Hello, I think I'm experiencing a NAT networking problem, as most games I play complain that my NAT is moderate, or sometimes strict. I've researched this and found out it may be a Double NAT problem.

I've also researched two solutions for this: Disable NAT and DCHP on either the modem or router, or set up a PPPoE connection between the two. Can someone tell me which one is the easiest to do and how to do it?

Router: Linksys E3200 w/ Cisco

Modem: Motorola SB5102

Other Info: This IS a broadband connection, and I believe it is a DSL or Cable setup. I also know how to access the router settings, and how to disable NAT and DCHP. However, I do not know how to connect to the modem (I do know the default IP for it) and don't know how to perform a PPPoE connection, as this would be my first time.
 

A:Setting up a PPPoE connection between router & modem

PPPoE is for DSL connections... Go to the router and modem websites and download the instructions from there. It will explain how to connect and access the router
 

Read other 1 answers
RELEVANCY SCORE 59.2

I'd like to network two PCs, both running Me and have a broadband connection , probably with Tiscali. I need someadvice on what modem / router I need to get. If I ask a shop or ISP I get slanted information.

I'd like to have the option of possibly changing provider in the future. (I'm aware that AOL seems to need a particular modem, I'd probably never want to sign up with them anyway).

Please can someone recommend either a suitable modem / router or the features and specifications I should be looking for. What does ethernet and 10/100 mean anyway?

Many thanks in advance.
 

A:Modem / router choice for broadband connection

Depends on your budget and how your system is going to evolve over the next year or two i.e. you could get a modem/router with wired and wireless connection such as those made by Draytek or a more simple single port router such as those supplied by some ISPs and use windows inbuilt software to share the connection [but this requires the main PC on for the others to connect].
There is also the possibility of buying a modem/router with inbuilt hardware firewall which whilst more expensive is a good security feature.
Linksys also make some excellent modem/routers at a good price.
Perhaps a look round the price comparison sites such as www.dealtime.co.uk will help you find the cheapest of those suggested.

What does ethernet and 10/100 mean anywayClick to expand...

It normally just means its 10Mbps and 100Mbps switchable dependent on the speed of the network card attached to it i.e. if the card is only 10Mbps then that port will run at the slower speed.
 

Read other 2 answers
RELEVANCY SCORE 59.2

About every 1-2 weeks my router loses the connection to the internet via cable modem. This has happened with 2 different cable modems (Netgear CM212 and Motorola Surfboard 5100) and also with 2 different routers (Netgear 614 and D-Link DI-524). When this happens the thing that usually fixes it is unplugging the router for several minutes and then plugging it back in again. I have Windows XP set to automatically detect the internet connection, and the router is set to use DHCP. Sometimes I also have to bypass the router and then put it back (so this could be partially a Windows problem?). Is there any way I can configure the router so it doesn't keep losing the internet connection? I have Comcast cable modem service.

Thank you.
 

A:Router keeps losing connection to cable modem

Read other 7 answers
RELEVANCY SCORE 59.2

After trouble shooting on my own, I'm stuck. My current situation is that I have a Netopia (Cayman 3346) DSL modem-router (not wireless) that is connected to a (Linksys E100) wireless router. I currently run a small business that has two other computers connected through the Linksys router and are properly configured on the network.

Problems, Thursday night was the last time I could connect using the wireless connection. I cannot connect wirelessly now, but I can connect through the Netopia modem-router.

Manual Troubleshooting included:

-CMD for proper release/renew (IP shows 192.)
-Hard reset both modem and router.
-Manually configured the Linksys router.
-Called Netopia and manually configured modem-router successfully
-Again, computers hard-wired to modem-router will connect.
-Lights on Linksys router are lit and working properly (i.e wifi icon,power, and line 1)

Any ideas? I found in the Netopia settings of the WAN to be configured this way, should I change to IP Address?

Any help would be appreciated as my business is hindered by only having one computer operational.

EDIT: Here is a picture from the Netopia WAN configuration page
 

A:Solved: Connection issues: Modem to Router

Read other 9 answers
RELEVANCY SCORE 59.2

I hope I'm posting this in the right category...
In any case, to begin, I just want to let whoever reads this know that I am definitely not the most experienced tech guy out there. A technician is supposed to come Sunday morning to help try and figure out this problem, but I figured I'd post it here and see what kinds of responses I receive.

A few days ago, I returned from a vacation to find that my old modem, a Motorola, had burnt out/died/lost power; I'm not sure. So we (my father and I) purchased through the recommendation of a Cox representative a relatively new 2 in 1 modem/router unit called the Gateway.

The wired connection, which we use for the desktop, has been perfectly fine. My laptop on the other hand, which I use wirelessly, might as well have no connection at all. Initially, it had no problem connecting to the new unit. I brought up my homepage, which came up deceptively quick, and told the technician that all appeared to be working normally. However, after going through some other websites, I found that it was loading pages/videos EXTREMELY slowly. After a while I did a speedtest, and after many trials I'm finding my average download to be about 1 Mbps, and upload to either be higher (?) at about 1.4 Mbps or unreadable. It should be noted that with the package we have, we should be getting about 30 down and 3 up.

My father and I talked with a couple Cox representatives on the phone, but they couldn't decipher the problem. There is ... Read more

A:Laptop has terrible connection to new modem/router

how many devices do you have that can connect wirelessly

does the cable connection work at the correct download speed reliably

can we see an xirrus screen shot - from a wireless PC

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/cdn/pdf/Xirrus-Wi-Fi-inspectorguide-1-2-1-RevB-6.aspx

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open t... Read more

Read other 1 answers
RELEVANCY SCORE 59.2

OK, I'm having some trouble with my DSL connection. Right now it's working, but it's starting to slow down again which means that I'm soon to be disconnected totally. My provider says that nothing is wrong on their end (which I've confirmed with 2 neighbors) so it must be on my end.

My connection starts to work REALLY slowly and then eventually just quits working altogether. My "status" light on my DSL modem/router is completely black, the other lights are green, however, the LAN light is blinking furiously (I don't really know if it's always been that way or not... )

Anyway, I called the "tech support" people at my provider, and they walked me though some steps that seemed to alleviate the problem for now, but I want it stopped permanently!

I put in the "IP address" (shown on the IPconfig command prompt) into firefox's address bar and it pulled up the Zoom information page and I went to the system status portion like I was told to do, but there was NO IP ADDRESS!! NONE!! So we cycled the modem--nothing. We powered down the computers--nothing. I unplugged the ethernet cable from one port and moved it to another--PRESTO!! The internet works again!

I'm not even sure why this worked the way it did, because my laptop is wirelessly connected....why did changing the port of my desktop do anything? Or was it just chance? And how do I keep this from happening? Ideas?? Suggestions?? Anyone??
 

A:DSL/Wireless Router/Modem--dropped connection

Read other 6 answers
RELEVANCY SCORE 59.2

I can connect to internet only with land line I cannot get my wireless to connect, It wants to connect then drops right away, What am I doing wrong?

A:connection problems belkin router att modem

Log into your Router setup and see if you are using the B or G or N settings. If using N, try G. If your using automatic, try B/G setting. etc. Reset the WPA-2 password.

Read other 2 answers
RELEVANCY SCORE 59.2

I'm currently trying to have internet in a different place than my main one, i have the current modem plugged.

http://www.motorola.com/Business/US...nd/SURFboard+Modems+and+Gateways/SB6180_US-EN

http://www.arrisi.com/product_catalog/listers/index.asp?id=418

It seems both are plugged.

On the arris one i see those lights on.

[x] Power
[x] DS
[x] US
[x] Online
[ ] Link
[x] Telephone 1
[ ] Telephone 2
[x] Battery

On the Motorola one i got all the lights on.

I'm trying to put internet into a second room by wire.

I connected the wire from my second computer to the Arris modem in the yellow plug, and it still doesn't work.

Could i please get some help on how i could get multiple internet, i'm really having some trouble right now.

Thank you very much!
/Edit If it helps, i use Windows Vista.

If it's not possible to receive multiple internet with those, please tell me what i need!

PS: Sorry for my grammar, my natal language is french.
 

A:Modem / Router Internet multiple connection. Help!

Read other 9 answers
RELEVANCY SCORE 59.2

Just purchased a Linksys WRT54G2 router so my wife can surf indepently in the house. The problem is that in trying to connect with the installation software I cannot find connection instructions. This is because 2 years ago when my daughter was home with her laptop computer we connected a very similar Linksys router. When I insert the CD-ROM to get instructions the software says "it appears you already have a router connected." and since this is the only way to make the connections I have to try and find the proper connection method here. The dsl modem is a Westell 6100.
 

A:Making connection from dsl modem to wireless router

Welcome to TSG, jayceeno.

Don't know how much help it will be, but here is Verizon's directions on hooking up a linksys router to the Westell 6100 DSL modem.

http://onlinehelp.verizon.net/consumer/bin/pdf/NetworkSteps/Case6445LinksysWestell6100.pdf
 

Read other 1 answers
RELEVANCY SCORE 59.2

Hey hey,

My fiance and I are both connected to our speedstream 6520 via ethernet cables. I mainly use my connection to play World of Warcraft, she uses hers for work (inbound customer service). The issue we're having is that when I play WoW while she's working, it disrupts her systems connection to her work server (i guess that's what she's connected to) and she gives me hell for it.

Is there anything that can be done so that we can both use the internet connection without interfering with the others fun/work?

Thanks
 

A:Router/modem, shared connection issue

Read other 9 answers
RELEVANCY SCORE 59.2

Speed

We recently had Verizon HiSpeed (speeds up to 768 Kbps) installed with Westell(Model 327W) modem/router connected to our desktop.
When we place cursor over the "Network" connection in lower right of screen (of desktoop) it states:
The Internet (2)
Spreed 10.0 Mbps
Sent 141,926 bytes
Received 921,712 bytes

However, in the laptop, when we place the cursor over the "Network" connection, we see:
Speed 36Mbps
Signal Strength Excellent
Status Connected.

What we would like to know is why does our desktop show SPEED of "10.0 Mbps"

while the laptop shows:
SPEED of "36.0 Mbps?"
(Connection speed on both shows: download 705 kbps; upload 133 kbps.)

Is this something to be very worried/concerned about? We are senior citizens and the speed when we connect to Internet appears to be fine as far as we are concerned.
Thanks
 

A:speed of your network connection to the modem/router

Read other 9 answers
RELEVANCY SCORE 59.2

I'm having problems with my internet connection and modem/router. It's an Actiontec gt704wg, which serves as both a modem and wireless router. One computer is connected directly to the router and 2 others use wireless. The connection just randomly cuts off, the internet light goes blank, the dsl light flashes, and then it takes about 15-25 seconds to reconnect. I get tons of static on my phones, and the frequency of disconnecting goes up whenever i get/make a phone call. In addition, when I connect the other computers wirelessly, i get tremendous delays and more disconnections, and it takes several minutes to reconnect. The router's not old, about a year, and I've had no problems with it until recently. I've changed all my dsl phone filters, so I know it's not that. Can anyone help me?
 

A:internet connection, Router/modem problems

It sounds to me like something wrong with the router or, less likely, wireless interference. Looking at the second one first, do you detect any other wireless networks on your same or close to your channel? Any 2.4Ghz cordless phone?

Next I suggest looking for a firmware update for the router. And my final (at least for now) suggestion is to reset the router to factory default settings and reconfigure.
 

Read other 1 answers
RELEVANCY SCORE 59.2

I have a D-Link router with a Bellsouth Westel modem in Bridged mode. It will work for some time and eventually I loose my network. I've been through the ringer with BellSouth and D-link tech support. It's as though the modem won't stay bridged. D-link had me set the router to enable DHCP as well as leave the modem unbridged. I know that eventually, they will conflict and I will lose my connection. Please help
 

A:D-link router and dsl modem connection problems

Try another router
 

Read other 1 answers
RELEVANCY SCORE 59.2

Hi,

I have this problem with my home wireless network for quite sometime. I am using cable broadband with the motorola modem and aztech router.

The problem is that my internet connection drops suddenly everyday... I will power off my modem and router, restart it but still cannot get internet access. after a few tries, it might come back...

I have tested my router at my friend's place and it is working fine. So i thought it's the modem problem, so i also went to test the modem at my friend's place and it's working fine too. I even bought new ethernet cable.

I do not know much about hardwares and wireless networking. I do hope I can find the problem and get it solved soon...
 

A:working router and modem but no internet connection

how many pcs are connected on your network and do they all work ok except yours ?

would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
Make sure you also indicate on the reply which tests are for what condition.

As you are connected by wireless, please include the xirrus screen shots for both conditions - see how below.

Please post back here the make and exact model of the router and the make and exact model of the modem.

Please make a note of the status of the lights on the modem and on the router when working normally - post that light status here.
Now when the internet disconnects make a note of the status of the lights for the modem and router here again. also note which have changed.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply he... Read more

Read other 1 answers
RELEVANCY SCORE 58.4

Hi,

I recently got a new router and need a diagram or picture to connect it to the following: VOIP phone adapter, modem, computer. Or however I connect all of this stuff to get the router to work without losing Internet (high speed cable) or phone usage.

Thanks.

d
 

A:New router, voip phone adapter, modem connection

Read other 13 answers
RELEVANCY SCORE 58.4

I have a motorola surfboard cable modem from time warner connected to Linksys WRT54G router, with one wired connection to the PC and a wireless connection to a laptop.

The connection to the internet is dropped every couple of hours from both computers and requires me to unplug the cable modem and then the router and then plug them back in before it will work again.

When the connection does drop, I cannot even access the router setup (192.168.1.1) from the PC. Also, this problem did not seem to happen when I tried connecting the PC right to the cable modem without the use of the router. This is why I think it is the router.

I tried setting the router to clone MAC address, and setting the MTU to 1400, but I am still having the same problem. Does anyone have other suggestions about what else there is to do?
 

A:WRT54G Router dropping connection to cable modem

First things we normally recommend are:
Download the latest firmware for your router.
Reset your router to it's default config by holding in the reset button for at least 15 seconds.
 

Read other 2 answers