Over 1 million tech questions and answers.

Take off laptop monitor, use external monitor

Q: Take off laptop monitor, use external monitor

Hi, I have an old laptop that I have installed Puppy Linux on, it works fine except that my monitor doesn't work. So I plug in an external one, but its a bad setup because the laptop needs to be open. I was wondering if I could take the monitor off the laptop. Would the computer still work? The model is an old Toshiba 1100.
Thanks
Ned

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Take off laptop monitor, use external monitor

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 92.4

I have an HP laptop and I have been running it with dual monitors. I finally decided to upgrade to Windows 7 and after I installed it I noticed that the built in monitor of my laptop looked strange and when I opened the display settings to change the screen resolution and set the external monitor as a separate monitor rather than a mirror I noticed that only one monitor was detected and it was the external one (Generic non-pnp monitor on standard VGA graphics adapter) and the built in monitor does NOT show up at all.

I've tried the detection button, in hopes that the computer would read the built in monitor and I could fix the problem. This did not help. I tried unplugging/replugging the external monitor to no avail. I tried restarting without the external monitor plugged in and it STILL reads the built in monitor as if it is the external one. Is there anyway to fix this? I have not tried re-installing the OS, not yet anyways.

Any suggestions ?
 

A:Monitor Issues - Laptop Reading Built In Monitor as if it were my external monitor.

Only thing I can think of is to disconnnect the external monitor, uninstall any monitors listed and then reboot and hope the computer installs the correct drivers for the laptop monitor.
 

Read other 1 answers
RELEVANCY SCORE 90.8

I am using a 22" screen for my primary screen and the laptop lid open for a secondary screen. The main screens resolution is 1680x1050, I can set it to anything I want and it's always using the full screen. The laptop screen on the other hand will only use the full screen if it's at 1400x1050 resolution (max for that screen, IBM Thinkpad T43). With the large 22" screen I have no trouble reading the screen at high resolutions, the screen is huge, with the little 14" screen though I have to strain to read the screen at 1400x1050.

The problem is when I set the laptop screen to anything lower than 1400x1050, it uses less of the screen. Preferrably I want it at 1280x1024 or 1024x768 (I dont know which I want yet as I can't see the freaking screen at that resolution). At 1280x1024 for instance the useable screen is just a box in the middle, so the "1280x1024" is still barely readable for me cause it's shrunk from full screen, plus it's just annoying only using a portion of the screen.

I have played with the ATI Control Center, the Thinkpad display settings and windows display settings and just cannot get this thing to go full screen at lower resolutions when docked and using the external monitor.

Anyway to resolve this?
 

Read other answers
RELEVANCY SCORE 85.2

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen which is the secondary monitor.


My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080? I googled what is my resolution on the external monitor and it does show 1920x1200 which is correct.


My external monitor which is my main monitor is fine at the moment with the 1920x1200. Its windows 10 but im assuming this should be very similar to windows 7 to fix this issue?

Read other answers
RELEVANCY SCORE 85.2

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen which is the secondary monitor.


My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080? I googled what is my resolution on the external monitor and it does show 1920x1200 which is correct.


My external monitor which is my main monitor is fine at the moment with the 1920x1200. Its windows 10 but im assuming this should be very similar to windows 7 to fix this issue?

Read other answers
RELEVANCY SCORE 84.8

Windows 10 laptop. I connect it to an external monitor and use hdmi cable. My external monitor is my main monitor. I use the laptop monitor as the secondary monitor. I extend the display.

My desktop icons are always on my external monitor desktop. I had moved the hdmi cable connected to my laptop i believe which caused all my icons from my external monitor to go on the laptop monitor. Also there is even spacing on all of the icons. Has anyone had this happened? I then clicked sort and then it rearranged so there is no spacing etc. However, i then noticed hey why are my icons on my laptop monitor and not my external monitor.

Does anyone know why this happened? When i open chrome and other programs, it does open up on my external monitor though which is my primary monitor. I believe i can just drag each of the icons on my desktop on my laptop screen to my external monitor. So just do this and that fixes the issue right? Or is there a way to have all the icons just move to the external monitor. The reason i ask this is in case the icons just suddenly move to the laptop screen again.

Read other answers
RELEVANCY SCORE 84.8

My old dell laptop L502x is a bit quirky and caused me to buy a desktop, however, i think it is still saveable. when i have it display to an external monitor via hdmi, it works 100% with no problems. however, when i use the monitor that is physically attached to the laptop, i will get a " A clock interrupt was not received on a secondary processor" BSOD. from what i've gathered over numerous crashes, i believe its a problem with the integrated graphics in the processor, since they are not used when outputting via hdmi. i could be wrong tho, any help is greatly appreciated.

A:Dell Laptop external monitor = OK, attached monitor = BSOD

Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 84.8

Windows 10 laptop. I connect it to an external monitor and use hdmi cable. My external monitor is my main monitor. I use the laptop monitor as the secondary monitor. I extend the display.



My desktop icons are always on my external monitor desktop. I had moved the hdmi cable connected to my laptop i believe which caused all my icons from my external monitor to go on the laptop monitor. Also there is even spacing on all of the icons. Has anyone had this happened? I then clicked sort and then it rearranged so there is no spacing etc. However, i then noticed hey why are my icons on my laptop monitor and not my external monitor.



Does anyone know why this happened? When i open chrome and other programs, it does open up on my external monitor though which is my primary monitor. I believe i can just drag each of the icons on my desktop on my laptop screen to my external monitor. So just do this and that fixes the issue right? Or is there a way to have all the icons just move to the external monitor. The reason i ask this is in case the icons just suddenly move to the laptop screen again.

Read other answers
RELEVANCY SCORE 84.8

Windows 10 laptop. I connect it to an external monitor and use hdmi cable. My external monitor is my main monitor. I use the laptop monitor as the secondary monitor. I extend the display.



My desktop icons are always on my external monitor desktop. I had moved the hdmi cable connected to my laptop i believe which caused all my icons from my external monitor to go on the laptop monitor. Also there is even spacing on all of the icons. Has anyone had this happened? I then clicked sort and then it rearranged so there is no spacing etc. However, i then noticed hey why are my icons on my laptop monitor and not my external monitor.



Does anyone know why this happened? When i open chrome and other programs, it does open up on my external monitor though which is my primary monitor. I believe i can just drag each of the icons on my desktop on my laptop screen to my external monitor. So just do this and that fixes the issue right? Or is there a way to have all the icons just move to the external monitor. The reason i ask this is in case the icons just suddenly move to the laptop screen again.

Read other answers
RELEVANCY SCORE 84.8

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen.
My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080?
My external monitor which is my main monitor is fine at the moment with the 1920x1200.

Read other answers
RELEVANCY SCORE 82.4

Hi All,
I have an external Envision flatscreen monitor that I have been using attached to my laptop for around a year. I have the monitor displaying on both laptop and the external Monitor. Just recently I had a pc issue which I have rectified and my external monitor since rectifying that issue now displays fuzzy. What can I troubleshoot to find out my issue. I've reviewed the Graphics and Display Properties. It is currently sitting at 1024 by 768, Color: True Color and Refresh 60HZ. The odd thing is that when I am in Display Properties, Settings tab, the left monitor in top is black (this should be my laptop) and the right monitor in the pic, which should be my external monitor is gr3y. When I have pressed on the black monitor, and press Identify it indicates 1. When I press on the grey monitor and press identify, it says it is not active, although I do have an image on my external monitor (fuzzy image). When I click the arrow on 'Extend my Windows Desktop this monitor' the right monitor then is black and when I press on it and press 'Identify' it says it is 1 as well. Is this correct. I know this has nothing to do with the fuzziness but still thought I might see if this is an issue or not.
When I right click on my desktop and go into Graphics Properties - I just get confused as to what this is all about. When I go into Display Tab the Monitor is checked, I can check on any of the others i.e. Notebook, Intel Dual display clone or Extended Desktop. Re... Read more

A:Fuzzy External Monitor - Laptop Monitor ok

Read other 6 answers
RELEVANCY SCORE 82.4

The laptop our family shares recently had its monitor broken. It displays half of the screen, but will not stop shaking. I have it hooked up to an external monitor, but I am unable to use it to display the laptop screen without changing the display settings via the laptop. Is there some command I can use to set the external monitor to display the laptop screen? Or do I need to replace the laptop screen?
 

A:using an external monitor as a primary monitor for a laptop

Read other 7 answers
RELEVANCY SCORE 75.2

When my laptop is plugged into an external monitor, the laptop screen is the "primary" display, where programs automatically open, etc. Is there a way to make the primary display not the laptop screen but the external monitor screen? Here's the catch--is there a way to do it *without looking at the primary monitor*?

I have this strange request because my laptop's screen recently died. I have connected an external monitor, and so can still use the computer--more or less. The problem is that I can't see my start menu, etc--they are all on the laptop screen, ie, the dead one.

I know, normally, how to switch the display: I would right click on the desktop and select "personalize," then "display" But when I do this, it opens the display in the primary monitor (the broken laptop monitor) and I can't see it to change the settings. It's a sad catch 22.

If anyone could help me with this is would REALLY appreciate it. Thank you.
 

A:Switch Primary Monitor from Laptop to External-Without Looking at the Primary Monitor

Hi nomonitor, and welcome to TSG

Check your user manual for the laptop to see if has has a special key or a Function key that lets you toggle between the internal display and external monitor.
 

Read other 3 answers
RELEVANCY SCORE 72.8

I'm using a T430s and a mini dock plus series 3. This is the dock with the dual DVI, dual DisplayPort, 1x VGA. I do not use the laptop's built-in screen; just the 2 external monitors. Intel HD4000 graphic chip and Nvidia Optimus/ I previously had 2 20" monitors with a 1680x1050 resolution using DVI-to-DVI. They both worked fine. I upgraded to 2 24" monitors with a 1920x1200 resolution. The laptop is not recognizing the second monitor. I have tried:dual display port (dock side) to mini display port (monitor side): only 1 monitor recognizeddual dvi (dock side) to HDMI (monitor side): only 1 monitor recognizedI ruled out monitor and cable problems by swapping...each by itself works fine. Looking up specs, I believe this resolution should be supported by DP or DVI. Can anybody confirm that this is a supported config? Any ideas what is wrong? UPDATE - I did try 1 DP/mDP and 1 DVI/HDMI: this does work. However, its not an ideal solution because it would interfere with the monitors ports which I want to use for a second PC. UPDATE 2 - OK, now I am beyond aggrivated. I also have a support ticket w/ Lenovo where they suggested switching to Integrated Graphics only in the BIOS. I tried that, no luck. After changing that setting back, i tried to get my 1 DP / 1 DVI working, but now it would not recognize dual monitors. ??? After some testing, I'm finding that the -only- setup that works is the following: Dock DVI port 1 to Moni... Read more

A:Second monitor not detected: T430s with Mini Dock Plus Series 3 dual external monitor

Fixed; was a driver issue. Problem seems exclusive to a Dell u2415 on DP port 1 only of the dock or to the laptop's DP port (at least for the couple monitors I tried). It's possible it could affect other monitors. My starting point: 9.18.13.4535 / 9.17.10.2843 (Nvidia /  Intel) The latest driver from Lenovo is 9.18.13.4535 / 8.15.10.2725. I'm not sure how i have a slightly newer Intel, but that's what it was. I couldn't install the Lenovo driver. I also couldn't install a newer driver from Intel (10.18.10.4276). In both cases Windows or the Intel installer stopped me saying the mfr provided the drivers and that the installed version was up to date. I worked around by first rolling back the Intel driver. The manual (.zip) install of the latest intel driver worked. This immediately fixed the Dell u2415 on DP port 1 and laptop's built-in DP port.

Read other 3 answers
RELEVANCY SCORE 72.4

Hello,I need an advice.
Dell Vostro 1510 (version nVidia) does not function LCD - very little light.External monitor works OK.LCD - brightness up and down works. Closing cover notebook to sleep - works OK.
Test another inverter and LCD.It's the same :(
Please, give me an advice.Thank You.

A:Dell Vostro 1510 LCD DIM - monitor external monitor works

If the other inverter/LCD is known to be compatible with the system and produces the same result, bad power circuit to the inverter - replace the mainboard.

Read other 1 answers
RELEVANCY SCORE 72.4

My laptop's monitor is broken, so I use an external monitor plugged in through an HDMI cord. I updated to Windows 10 and can't figure out how to toggle between display settings. I know you can do Windows + P and select expand, but seeing as I have a broken laptop monitor I can't do anything.

Read other answers
RELEVANCY SCORE 72

I have an Inspiron 8200 Dell Laptop and want to hook up an external monitor that I have. I plug the monitor cable into the back of the laptop and through settings can bring up the wallpaper on my laptop and drag items over to the monitor but what I want to do is to only utilize the external monitor. I don't want to have to drag items over across the screens. Is there a way to disable the monitor on the laptop and only use the external monitor?
 

A:Using external monitor on laptop

Press the function key, it's purple I think and says fn, and then press the F8 key CRT/LCD.
 

Read other 1 answers
RELEVANCY SCORE 72

Hello

I have a laptop with two VGA (intel & nvidia). I can connect external monitor with HDMI (clone mode), only with intel (from intel's menu).
is there any way to connect the external monitor with the nvidia card?

A:laptop with two VGA & external monitor

If the nVidia adapter is VGA only you'd have to use an adapter/cable to HDMI.
https://www.google.com/search?site=&....0.I1JZY1Of5H0

Read other 2 answers
RELEVANCY SCORE 72

Hi, I am really need help. Trying many ways but nothing helps.
My laptop doesn't recognize my external monitor. 
I was trying to connect monitor to my friend's dell laptop (he have smaller laptop, but very similar with mine) and all works just instantly after connect.
At the same time, on my laptop external monitor was work after many actions with drivers, uefi, etc. And in the end I don't understand what factors can help me in past to connect with monitor. But I can say, that external monitor works at first time after install drivers and rebooting pc, I think.
Recently I reinstall my operating system and trying to connect external monitor again - as I expect - laptop doesn't recognize it again. To resolve it, I am install the drivers, trying actions, that helps me, how i think, in past. In the end - nothing works and laptop doesn't recognize the external monitor again, like in past.

All characteristics that can help are below.

Laptop - Dell Inspiron 17R 5721
Motherboard System - UEFI A14

Video Cards
Integrated - Intel HD Graphics 4000
Discrete - AMD Radeon HD 8500M/8700M Series (Mars)

External Monitor - IIyama Prolite XB2483HSU

Connection between laptop & monitor - HDMI-HDMI

My Thoughts
I really don't understand what happens. In past I have the experience to connect different laptops and external monitors and always it was very easy. Just put in hdmi cabel and all works! I can't understand what's wrong with my laptop. ... Read more

A:Laptop & External Monitor

Ok, I found the solution! From random posts in internet I was create list of different actions to resolve my problem & one of them help me.
Solution.
1. Disconnect the external display
2. Restart Windows, and disable SecureBoot from BIOS (also must be uefi boot mode instead of legacy)
3. Once you are logged into Windows, re-install the display drivers.
I want to tell more about this paragraph.
How do I re-install display drivers?
- Open Device Manager
- Delete Intel Graphic device & his drivers
- Delete AMD Graphic device & his drivers
- When you delete graphic devices & drivers windows must start to search for drivers in internet and trying to install them (windows must have permission to install drivers automatically)
- When install starts - just waiting for the end - it can install about 5-10 minutes
4. After install connect the monitor - if monitor still doesn't work (like in my situation), reboot laptop again and leave the monitor on & connect to laptop.
Monitor must work after this at Welcome screen moment.
5. If it doesn't work yet
- try standard fn+F1 combination (it must work already after all that you've done before)
- wait about 5 minutes for windows (it can start to download some drivers for monitor - I think it's the most important moment - at my situation this drivers start to download before last laptop reboot) and than reboot laptop again with the monitor on & connect to laptop
- just reboot it again with the monitor on... Read more

Read other 1 answers
RELEVANCY SCORE 72

i have a samsung syncmaster 915N that i am trying to hook up to one of my laptops and am having no luck. i have two hp's one is a pavillion dv4, the other is a dv6000. i tried messing with every setting i could find on both computers and can't get anything but a black screen to show up on the samsung monitor. it came from a desktop that crashed so i know it works. i tried the function key that looks like the monitor as well.
any help or direction would be greatly appreciated.

A:External Monitor to Laptop

You do not mention the operating system.Are you wanting to use both monitors at once ore are you experiencing trouble with the built in monitor?When you plug in the external monitor is it detected? Does it show up in Device Manager under monitors?If you are running XP. Go to Control Panel > Display > do not recall the exact path from this point. But under one of the tabs will be a black window. In the window should be two monitors. There will be options to set the primary and secondary monitors as well as an option to "Extend Desktop into this monitor" or similarly worded. Is it checked?

Read other 3 answers
RELEVANCY SCORE 72

I'm thinking about getting a Raspberry Pi, but I don't have a monitor I can use.  Is it possible to connect it to the HDMI port on my P50 laptop, and use the laptop as a monitor?  I've seen this done on Apple computers, and it seems like it should work here too.

Read other answers
RELEVANCY SCORE 72

i am temporarily using my daughter's old laptop. the screen isnt working so i have plugged an old monitor into it. unfortunately i cant get the settings changed for this monitor such as pixel size. any ideas on how i can ?
 

A:laptop with external monitor

Read other 16 answers
RELEVANCY SCORE 72

I just bought a laptop with a shattered screen. It's an HP Pavilion dv2315nr. Nothing custom or altered. It works fine, but with the screen broken, and me unable to afford a replacement yet, it's basically just a desktop for now.

My problem is that I've been trying to use it with an LCD monitor. I hook it up, but the picture doesn't automatically transfer to the LCD like older laptops did. HP designed it so that you have to press the FN+F4 keys to switch to an external dispay. No matter how many times I try, it won't switch to the LCD. I've tried it at various points during the startup, and varied the ways I press the key combo. It did switch a couple times the first day I had it, but Windows Vista has a password on it so I couldn't go farther. When I restarted to try and do a system restore, it switched back to the laptop's display.

I need this thing to immediately switch to the LCD when it turns on so I can do a system restore and use it until I get a replacement screen. To do a system restore, I have to press F11 immediately while starting up. I've done that, waited a few minutes, and tried to switch to the LCD. It won't do it. And I can't think of anything else to try.

Any help would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 72

Trying to use my laptop with an external HP monitor; I have them connected; using FN & F4 keys I can toggle between displays (monitors) or both.  However, when only external monitor is on (which I want), & I close the laptop lid (as the HP monitor is designed to slide the laptop under it), the laptop shuts off & the external monitor goes dark. How do I keep the laptop on when the lid/screen is closed?  (HP Tech Support wants $49 to tell me.) Thanks.

A:External Monitor with laptop

Hi, Right click the Battery icon in the Taskbar and select Power Options. In the following window, select 'Choose what closing the lid does' in the left hand pane. In the subsequent window, next to the heading 'When I close the lid' set this to 'Do nothing' in the dropdown menu for both 'On battery' and 'Plugged in'. Click the Save Changes button at the bottom of the window to apply this change. Regards, DP-K  

Read other 1 answers
RELEVANCY SCORE 72

Hi

In general I use my laptop in one place, so I use external keyboard and monitor. Most of my stuff I do only on external monitor, but when i work (code and stuff) I like using both monitors (external as main + laptop monitor as secondary).

The problem is with switching between views. All I do is open laptop if I wanna use both monitors and close it if I don't need external. I have two problems:
1. After doing this operation (either open or close) windows will freeze for like almost 2 seconds before "adding" extra monitor - which is really annoying

2. I use my external monitor as default ALWAYS. But during this 'switching time' all applications which are set up to 'full screen' are changed to be 'still fullscreen' but smaller, like maybe 1-2 pixels smaller, and this is really annoying. To make it 'real fullscreen' again i have to switch it to smaller window - and maximalize again.
I hope You understand what I'm saying.
---
I really have problem with fixing at least second problem. I would be happy with the way it was in windows XP - so "laptop-monitor" is always reachable for applications - even when it's not active.

I have windows 7 x64
Nvidia optimus with Nvidia gt540m and intel card graphic

setting default GPU to Nvidia or intel doesn't affect the problem

A:Laptop + external monitor

You probably have different resolutions between the two monitors, so a maximized window on one, won't be the same size on the other. You may not have this issue if the screens are set at the same resolution. I recall having consistent results back when I had a laptop + external monitor which both had the same (1440x900) native resolution.

Read other 3 answers
RELEVANCY SCORE 72

Gateway ML6732 and Sanyo 42" LCD


I have a VGA to DVI connector and then DVI to HDMI into an LCD 42" tv.

I tried the Fn F4 key and only the screen flashes on the laptop. I tried going through display settings and no luck. There is a "detect external projector" function and nothing is detected. TV is not getting a signal.


Any idea what I'm doing wrong?

A:External monitor for laptop...

That laptop doesn't have Nvidia drivers, does it?
Have you tried changing the display settings?
Do you still have the manual for your TV?

Read other 5 answers
RELEVANCY SCORE 72

okay i have just bought a 42 inch toshiba hd ready tv and i want to connect my laptop to it via vga. however when i do this the tv doesnt display on the whole screen (just a square part of it). i have tried to change the res settings on the laptop but the tv just says settings out of range or something. please help
thanks
smithy

Read other answers
RELEVANCY SCORE 72

Hello,

A recent tragedy has left the display on my laptop inop. only approximately 1/10th of the display in the top left corner remains. I have an old Dell flat panel monitor that I wanted to hook up to have at least some functionality while I pursued a new computer or a replacement monitor. (feel free to comment on this as well).

When I hooked up the monitor, it worked as I had hoped. I saw my entire desktop on the external monitor. The only issue was the resolution was different making everything appear too large for the screen. I adjusted the resolution, and next thing I know, the only option is to "stretch monitor across both screens". This leaves the toolbar and all icons on the screen that does not work. All I have been able to do is to drag the toolbar to the external monitor and just restore/move any windows that open to that monitor. This is very cumbersome and too much for my wife to deal with.

I have a feeling that adjusting the resolution is what started my trouble. Please remember when giving advice that my primary monitor has only about 10% usable space, this makes accessing many tools difficult.

Thanks in advance for any and all suggestions,

Scott

My computer is a Dell Inspiron 1505 running xp media center. The video card is a radeon 256 and I think it is integrated, but I don't know the complete specs. Can get them from Dell if needed.
 

A:External monitor for laptop

If you use the ATI Catalyst Control you should be able to close the display to the external monitor.

Or Press FN and one of the F# keys on the keyboard and it should also enable the secondary monitor as an identical clone to the LCD panel.
 

Read other 3 answers
RELEVANCY SCORE 72

Dumb question?  To use an external monitor on my Inspiron, what port do I plug into on the laptop? 

A:using an external monitor on laptop

It depends on the system model -- specifically which type of port(s) it has -- and on the monitor, and the same.
No one can answer without knowing those two things.

Read other 1 answers
RELEVANCY SCORE 72

Is it possible to use an external monitor as the only monitor via laptop besides setting the external monitor to the secondary monitor and closing the lid of the laptop making it as if the external monitor was the only monitor? I ask this extremely lengthy question because I am trying to run my display at 1360x768 but my laptop monitor is only 1280x768 crippling the display of the external monitor. (edit: this theory is incorrect. I can only blame the laptop driver's inability to display the higher resolution.For some reason it can display 1360x768, but only when panning in 1280x768)

Any help would be greatly appreciated. Thanks.
 

A:laptop external monitor

Read other 7 answers
RELEVANCY SCORE 72

But have no idea how to do it. Does anyone know how I might do this? I'd ideally like to rig it up to an HDMI adapter, but VGA would be fine as well.

A:Want to rig up an old laptop lid as an external monitor.

Kbronski, Sorry to tell you this but the screen on a laptop is not the same as a external monitor.. It requires the electronics from the laptop to drive it. So the answer is no.

Rich

Read other 2 answers
RELEVANCY SCORE 71.6

On the driver page we have this:
Intel HD Graphics 530 Driver View detailsFile Name: Intel-HD-Graphics-530-Driver_28VH9_WIN_21.20.16.4727_A03.EXE
If the GPU is HD Graphics 630. Why is the driver 530???
Also in "View details" we have: 
Enhancements:- Update Intel 15.46 graphic driver branch for RedStone2 OS
Intel 15.46 supports OpenGL 4.5 and this driver doesn't: Intel-HD-Graphics-530-Driver_28VH9_WIN_21.20.16.4727_A03.EXE 
Then we have the following problem when I connect and external monitor to the HDMI port:
The window of Microsoft Visual Studio 2017 when dragged and snapped to the corner of the external monitor turns black but only sometimes. This rendering problem appears to be a driver problem according to Microsoft.

This needs to be addressed by Dell/Intel or NVIDIA as there appear to be many complaints.

Edit: I forgot to mention that I am talking about Windows 10. And this is what I see: 

Read other answers
RELEVANCY SCORE 71.6

Hi, all, I have a Dell XPS 15 laptop and recently bought a Asus MB169B external USB monitor.  When I plug the monitor in, the laptop monitor (not the external monitor) flickers about every half second.  If I unplug it, it stops.  I upgraded my video driver to no avail.
Is it simply a power supply issue (the external monitor  does not have a power cord)?  Anything I can do?  It does it even if I have the laptop plugged in and charging.  
*something interesting - I just discovered if I duplicate the display and not extend the flickering goes away...but that kind of defeats the point of a dual monitor for me.
Thanks.

A:dell xps 15 monitor flickering after connecting external usb monitor

Hi NATURAL1DAVE,
What is the exact system model? 
Have you connected the external monitor to a dock or hub or directly to the system USB port?
Update the BIOS - http://dell.to/1n3X2po - enter the service tag and download the BIOS, update and restart the machine and check.
Reinstall the video drivers and chipset drivers for the system from the above link and check.
Also, please click my DELL-username and write me a private message with the service tag and your Name for case records.
Let us know if you have any other queries.

Read other 1 answers
RELEVANCY SCORE 71.6

Hi, few days ago screen on my notebook Probook 6560b  with discreete GPU 6470M went black.  Monitor does not have any backlight and also there is no picture on it (looking at angle...so it is not faulty backlight). Pulled all devices out (HDD, CD-ROM) but monitor still remains blank (no BIOS screen). On external output (VGA or DP) there is pictrure, but it can not load any Windows (I have dualboot Windows 10 and WindowsXP). In Windows 10 shows error: VIDEO_TDR_FAILURE What failed: atikmpag.sys. In Windows XP, also blue screen with error in atikmpag.sys. So, I booted in SafeMode and remove Radeon HR6470M driver and put Standard VGA driver. Now PC boots to OS, but still only on external monitor. Tried to reinstall drivers, but it always fails with blank screen and PC freeze.With some many tries and restarts, in one moment notebook monitor starts to working again. But only up to next Windows restart.I tried to put new HDD in it and install fresh Windows...but same thing. Booted from live linux distro...only external monitor works. So, as I can see, external monitors on VGA or DP can work but only with generic VGA drivers. OS correctly recognize graphic card, but when driver is installed external monitor also goes blank and windows freezes (not responding on caps/num lock, no longer pingable on network).As in one moment internal monitor went back online it seams that maybe is some bad connections...but where...GPU or video memory? Also tried HP diagnostic... Read more

Read other answers
RELEVANCY SCORE 71.6

Hi,

i have a notebook lenovo y570 that has a intel 3000 and a nvidia gt 555m card. My external asus vg248 monitor used to work through hdmi, but now it doesnt. I test with another laptop and the monitor works through hdmi... i must have changed some setting in my lenovo. The monitor says no hdmi signal.

I think something is wrong here:

help please!!

A:Asus monitor not working as external monitor for notebook

See if this helps:

Extending the desktop to the attached monitor with Microsoft Windows Right-click the desktop, and then click Properties.
In the Display Properties dialog box, select the Settings tab.
Click the Display list and select your external monitor.
Note: For help identifying the monitors, click Identify.
Select Extend my Windows desktop onto this monitor, then click Apply or OK.

Read other 1 answers
RELEVANCY SCORE 71.2

Hi, I have a Toshiba Qosmio G20.
(http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=1&product=5006&part=4134#spectop)

It says in the specs it can do up to 2048x1536. I have an external Sony LCD monitor (Sony SDM P234, 23''). Yes it's quite a monitor and laptop too

Installed Sony drivers, latest Nvidia GO drivers from Toshiba web site. The best I can do is set the external monitor to 1600 x 1200 (with black bars on each sides). Called Toshiba once, the guy didn't had any clues for me

I tried what they said in the Toshiba support web site, no luck yet...

Any professional here would have any ideas ?

Thanks !

Guillaume
(sorry if my english is not perfect...)
 

A:1920x1200 with an external monitor on my laptop ??

Read other 8 answers
RELEVANCY SCORE 71.2

I have a laptop which is connected to an external monitor through a HDMI cable. Sometimes when I'm using the external monitor for watching a movie or playing a game I close the laptop lid. If I need to type for a second, when I open the laptop it automatically changes from the external display to the laptop display. This sometimes crashes certain applications and games. I would much prefer if it didn't automatically change my current screen when I plugged in a HDMI cable or when I opened the laptop lid. Is this possible?
 

A:How to keep external monitor on after opening laptop lid

Change the power option setting to do nothing when you close the lid.

Control Panel - Power Options

------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 71.2

My buddy has alaptop that the screen is going on it so hes plugged in an external monitor..When he boots up it shortly says going to standby and the monitor turns off.....Is there a setting to make the external monitor stay on..

i already tried going to power options in the control panel and it says never for turning the monitor off but that must be for the laptops original screen(monitor)...so thats not the problem here..Does anyone know what may be?

Yanman
 

A:laptop with external monitor probs

F4 - normall works - and keeps the setting for external monitor
 

Read other 1 answers
RELEVANCY SCORE 71.2

OK so I have Sager np9150 Gaming laptop with nvidia 670m 1.5gb ram graphic card and integrated intel hd 4000.

the monitor I'm trying to connect to is a Lg Flattron wide. I bought a hdmi to dvi adapter cable so that I can hook the hdmi side to my laptop and the dvi side to my monitor since it doesn't have a hdmi slot.

before plugging the hdmi side into the laptop my monitor say check signal cable. when I plug the hdmi side into my laptop the check signal cable disappear and it say digital power saving and then it stay in that mode.
 

A:My laptop cannot find external monitor

Right-click on your desktop, click Screen resolution, set to Extend these displays.
 

Read other 5 answers
RELEVANCY SCORE 71.2

I updated my Laptop 5/17 with the updated BIOS and other updates and now my external monitor will not project my laptop screen and is a checkerboard black and white pattern. It appears it does not recognize the HDMI connection to my Dell D3100 docking station.  I also updated the Nvideo card as suggested by Dell.  Any clues as to why this happened and a solution?

Read other answers
RELEVANCY SCORE 71.2

I have a Pavillion 23xi backlit monitor which I have had for about 3 years.  I just purchased a new HP Pavillion 15t notebook.  I want to hook the monitor up to the notebook and I don't understand the steps that I need to do.Thank you

Read other answers
RELEVANCY SCORE 71.2

I have an HP DV7 laptop here that didn't pass the drop test. The display is completely shot. I would assume the laptop would auto-detect an external monitor and light it up on boot; but, that isn't happening.

I downloaded the manual and can't find any information on the subject besides where the external VGA port is.

Anyone know what I might be missing?
 

A:How to activate external monitor on this HP laptop?

Found some information that suggests tapping the F4 function key toggles between different internal and external video modes.
 

Read other 2 answers
RELEVANCY SCORE 71.2

A have a HP ProBook 450 G2(2015) connected via HDMI to an external monitor LGM2762D
I upgraded my laptop to Windows 10approximately two months ago
Every morning when I start the laptop itappears to take approximately 20 minutes to synchronize with my externalmonitor
I have tried everything in the meantime toresolve this problem:-
? Upgraded Graphic card drivers -Intel(R) HD Graphics 5500
? Replaced HDMI cable
? Rebooted laptop
? Disconnected monitor power andHDMI connection
? Connected laptop via HDMI tothree other monitors(TV?s etc), same problem.?
My only current solution appears to bepower up the laptop in the morning and return in 20 minutes when laptop has synchronizedwith my LG monitor and I can therefore see what I am doing
Prior to upgrading toWindows 10, I had no such problem with Windows 7.?
I would be mostgrateful for any suggestions from this forum please
Many thanks

Read other answers
RELEVANCY SCORE 71.2

I would like to use an HP ENVY All-in-One Desktop - 27- b025se touch as an external monitor for my Windows-based laptop. Is that possible?

A:Using AIO desktop as external monitor for a laptop

@Henrique_2, welcome to the forum. Henrique_2 wrote:I would like to use an HP ENVY All-in-One Desktop - 27- b025se touch as an external monitor for my Windows-based laptop. Is that possible?Yes, you can connect your AIO to your laptop if the laptop has a HDMI port.  There are two HDMI ports (In and Out) on the AIO.  You will use the HDMI Out.  You will have to buy a HDMI cable.  Port #2 in the diagram is the the HDMI out. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

Read other 1 answers
RELEVANCY SCORE 71.2

Hello,

I'm looking for a comprehensive (as best as can be) site or link to understand how and the limitaions, needs and capabilities of using my TV as a monitor to play movies from a laptop or external HD. I think I can use the AV input jacks on the DVD player, but want to find out and understand the formats that they need to be in if necessary. The manual for the DVD player has no information and I can not find any information on line. The player may not have that capability, but I need to understand what I need so I can purchase the correct one. Right now I have XP on a desktop and one lapto and Vista on another laptop.

Thank you

A:wnat to use TV as monitor from external HD or laptop

With a little more information muzzles, someone here may be able to help you out:A list of the output jacks on the desktop, and 2 laptopsA list of the input jacks on the TV, and DVD playerMake and model of the desktop, laptops, TV, and DVD player

Read other 4 answers
RELEVANCY SCORE 71.2

Dear all,

I bought a new laptop a couple of weeks ago and connected it to an external monitor. It's Ben Q 1080p monitor and I noticed that when I plug it into my laptop and play a game on it (Injustice) I was getting quite bad latency. Not only had the game slowed down in speed, but the characters were out of sync with their voices.

I've always been a desktop man, so I don't understand why plugging an external monitor into a laptop will give latency. I purchased an HDMI 2.0 cable in order for it to work as I got no image with an HDMI 1.0 whatsoever.

Any help will be greatly appreciated.

Thank you

A:Latency on external monitor from laptop

Have you updated the NVIDIA drivers? Many times, new PC's do not come with the latest drivers. Get them direct from NVIDIA.

Welcome to NVIDIA - World Leader in Visual Computing Technologies

Read other 3 answers