Over 1 million tech questions and answers.

unable to configure outlook 2010

Q: unable to configure outlook 2010

Greeting to all. I have been anable to configure neither outlook nor thunderbird to download or send messages from my yahoomail address. each time a dialogue box comes up asking me for my password. or a message says failure to connect (or something like that) But with gmail things work well. Someone proposed that I use Ypops. I downloaded and installed it but the problem remained.
Thanks for any help

RELEVANCY SCORE 200
Preferred Solution: unable to configure outlook 2010

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: unable to configure outlook 2010

What kind of configurations you have there?
If you can update on that, would be helpful to rectify the problem.

Read other 3 answers
RELEVANCY SCORE 88.8

When I press F1 in Outlook 2010, it starts a Configure dialogue. It always fails, then says restart to complete, even though it says it rolled-back changes. I don't know why it is failing, nor where to look. Obviously, I can't get help within Outlook.

Thanks.

TSG SysInfo:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8122 Mb
Graphics Card: NVIDIA GeForce 310M, 512 Mb
Hard Drives: C: Total - 597562 MB, Free - 350316 MB; F: Total - 1907695 MB, Free - 1084235 MB;
Motherboard: TOSHIBA, NWQAA
Antivirus: Kaspersky Anti-Virus, Disabled
 

A:Outlook 2010, Unable to Configure

Have you tried a repair install of outlook or uninstall then reinstall?
 

Read other 2 answers
RELEVANCY SCORE 68

I am having trouble configuring Outlook 2010 on a new Windows 10 Pro clean install so that mail from multiple Gmail and Comcast accounts all go into 1 PST file. I would like to have 1 inbox for all 5 emailaccounts.

Even when I use ?Manually configure Server settings?? andspecify an existing PST on D:\Outlook, Outlook creates a new PST file on C:\Users\(My Username)\AppData\Local\Microsoft\Outlook.

Any help out there?

TIA
Ken

A:How to configure Outlook 2010 to have 1 inbox for multiple email accts

You can do it this way with Mail App

If you want to link all your mail into one inbox you can do it.

Open Mail either from all App or Taskbar if you have it set up that way

Once open click on Settings found in bottom Right Hand Corner
Then go to Manage Account
Then go to
Change mailbox sync settings
Once done
Press Save
Do that with every Account you have
There like
Outlook
Gmail
Etc

Then click Link Inboxes
Tick which Inboxes you want to link
Also you can Name the link to anything you want to
Once done Click Save

Now when you receive Mail from any of your contact etc
It will now come into one Inbox
Have done it and it does work

This saves you having to click on each Mail inbox

If you want to revert back just
Click on the inbox linked untick
Press Save and they are all back showing one by one

Read other 0 answers
RELEVANCY SCORE 58

First, I tried to get Outlook 2010 to see my .dbx folders from Outlook Express, it wouldn't.

I then migrated my OE mail to WLM. I then tried to both export my mail to Outlook 2010 and Import from Outlook 2010. When importing, Outlook only saw the welcome mail message but didnt see anything else.

I should add that I copied my old (2007 Outlook.pst) file into Outlook 2010's store directory. I am not sure if this is why I am unable to import my mail.

Any ideas?

A:Outlook 2010: Unable to import mail from WLM

I just got done getting my e-mail from WLM to Outlook 2010.

There are a couple of tricks:You need to have Outlook set as your default mail client
Outlook needs to be the 32-bit version. The 64-bit version will not work
Make sure Outlook is not running
Open WLM. Menu item: File -> Export Messages
Select output to Exchange format. This will generate the PST file and follow the directions as they are presented
Close WLM
Open Outlook. Your entire email account will appear as a folder under your default account in Outlook. Time to move things around.

Read other 3 answers
RELEVANCY SCORE 58

I installed Win 8 CP, and since have been unable to send or receive in outlook 2010, I get the following error



Was working fine before installation, I have tried repairing from the disc, webmail works OK, all the settings in accounts are correct as far as I can tell, I have tried turning off the firewall etc.

Any Ideas?

Regards
Steve

Read other answers
RELEVANCY SCORE 57.2

Win 7, 64 desktop, AMD 8350 8-core, 16gb, Linksys EA8300 router, Arris SB6190 cable modem, xfinity hi-speed
int
I am running IPVanish (latest version) & Outlook 2010. Outgoing smtp server is smtp.office365.com and outgoing
server is configured as 587, TLS. Outgoing server requires authentification/use same settings as incoming mail server.

IPVanish with L2TP, OpenVPN Port 443.

This seems to be a common problem that I see in the forums all the time and affects multiple versions of Outlook
(and other mail providers, as well) and multiple VPN providers. Right now my only solution is to disconnect VPN before sending mail.
Here are the things I have tried:

Tried different VPN protocols/portsTried logging on in Outlook specifying username and pwTried logging on in Outlook using SPA (didn't expect that to work)Tried logging onto incoming mail server before sending mailTried adding 127.0.0.1 smtp.office365.com to hosts file
What I would like to do now is to add a route to force using the regular network instead of the VPN network
for smtp.office365.com. The problem is that MS uses multiple ip addresses; I'm sure there are farms of servers. Here is the ip resolution from ipaddress.com:

When I ping smtp.office365.com it returns an ip (either vp4 or ip6) which is different. See ping here:

I'm pretty much at a loss at this point as what to do. route print or netstat -r are not helping me but I am
a bit out of my element here so I would appreciate any help.... Read more

Read other answers
RELEVANCY SCORE 56.8

Hi support,

Am still unable to retrieve my old emails after I rebuild it.

What could be the problem to this? How do I solve this?
Booog
 

A:Unable to find old emails after index/rebuild in Outlook 2010

Was it web based Yahoo, gmail,hotmail) or ???
 

Read other 5 answers
RELEVANCY SCORE 56.8

My computer is an HP Pavilion a6345f running Windows Vista Home Edition that I've had since new (4 years ago).

During the past week or so, I've had trouble with my Office Outlook email program in the MS Office 2010 suite. When I open it and click on an email I'd get the 'Not Responding' notation next to the program name in the top part of the window. To correct this, I've used the repair function on the cd and the scanpst file in Program File, Microsoft Office, Office 14. This seems to work for a while but the 'Not Responding' message has still appeared.

Concerned that I might lose my two email data files for Office Outlook, I exported them to a flash drive where I incorporated them into one file named Outlook Data File.pst. After I'd repaired the program, I imported this file and have my data but am now unable to send/receive emails using the program (I can send/receive emails via the Internet but prefer Office Outlook).

When I try Send/Receive on Office Outlook, I get the error message 0x8004010F which talks about synchronization of an offline address book with Exchange Servers 2007 or 2010 (link here: http://support.microsoft.com/kb/939765). I contacted my ISP and the techie helped me to ensure that I had a functioning email address but was unable to remedy the problem because it's a Microsoft program which the ISP doesn't support (but does support Office 2007).

I'd be grateful for any advice that will correc... Read more

A:Unable to Send/Receive Email in MS Office Outlook 2010

Read other 7 answers
RELEVANCY SCORE 56

Help! I recently had to restore my computer after the hard drive crashed. I reinstalled windows 7 and office 2010, including outlook. Since then, nothing has run well. Outlook will not search and I cannot get the indexing to work. I have not been able to complete a windows update and the troubleshooting doesn't work either. In addition, iTunes was unable to load properly.
 

A:unable to run windows update; troubleshooting not working and outlook 2010 not indexi

Hi
Do you know why your hard drive crashed?
Was the replacement hard drive a new one?
Are there any outstanding drivers needed in the device manager?
Have you installed service pack 1 for Windows 7?
 

Read other 1 answers
RELEVANCY SCORE 55.6

In my Outlook 2010 I have set up a number of Contact Groups. I've named them A, B, C, D.............Z. In each one are the surnames of the recipients, e.g. in the A is Anderson, Addy, Apple, Adams, Aggenbach, etc., and likewise in B to Z. One of them (lets say the V's) have 35 addresses, and the A's have 6 addresses.

The problem I'm having is that when choosing the V Group (and some of the others), then when I click Send then it forever says Sending and never completes the task. So, it's impossible to send any other emails thereafter: they all then sit in the Outbox, waiting for the V task to finish. When I close and then re-open Outlook it just continues to send. I then have to delete some of the V recipients, until there are about 5 or so only, then it's works OK. Could the problem be, amongst others, the size in kB of the V Group, perhaps?

Please help!
 

A:Solved: Outlook 2010 unable to send contacts in distribution list successfully.

Just an idea, what email service are you using it with ?
is this a company exchange service or a home service
if home , and connected to one of the free mail providers (hotmail, gmail, yahoo etc)
perhaps there is a spam limit put on the number of email address you can send out on 1 email

although , I would expect 35 addresses to be OK
Gmail is 99
https://support.google.com/a/answer/166852?hl=en

outlook.com/hotmail
http://windows.microsoft.com/en-GB/windows/outlook/errors-sending-mail

Email Sending Limit and Send Rate - Gmail, Hotmail, Yahoo! Mail, AOL
http://www.yetesoft.com/free-email-marketing-resources/email-sending-limit/
 

Read other 3 answers
RELEVANCY SCORE 49.6

When I download Win updates, I am unable to configure the updates. How can this be corrected?
 
JN

Read other answers
RELEVANCY SCORE 49.6

When Win updates are downloaded, the computer will not configure them and reverts back.What can I do?
 
JN

A:Unable to Configure Win Updates

The cache update files could be damage delete the Windows update cache files.
Save all your open files and close all programs.
Open Command Prompt as a administrator.
Type Sc stop wuauserv press Enter key.
Type Rd  /q   /s  "C:\Windows\SoftwareDistribution" press Enter key.
Type Shutdown  /r  /t 1 press Enter key.
 
After computer restarts check and install available Windows updates.

Read other 1 answers
RELEVANCY SCORE 49.6

I recently purchased a new computer that has Office 2010 installed. I would like to move the contents of my .pts file from my old computer which has Outlook 2007 to my new computer which has Outlook 2010. Before, when I wanted to transfer my .pts file from one computer to another I would just copy the file to a portable hard drive and then transfer the file to the other computer. However, Outlook 2010 is completely different animal. When I go to C:, Users, App Data, etc., new computer, it is completely different from my other computer that had Vista. My question is, how can I transfer my .pts file and/or my address book, calendar, contacts, etc. for my older Windows Vista computer that had Outlook 2007, to my new computer that has Windows 7 and Outlook 2010 installed? Thanks in advance for any and all suggestions.
 

A:Solved: Moving Outlook Messages and Address Book From Outlook 2007 to Outlook 2010

Hello referee07;

Copy your .pst file from your old computer to the new one or your portable hard drive.

To launch the Outlook 2010 Export/Import wizard, first go to File menu, navigate to Open, and click Import.

In the Import And Export wizard, select Import from another program or file option and hit Next

Under File Type, select Outlook Data File(.pst) and hit Next

Now choose the file to import, select the options, and hit Next

Once done, finally select the folder to import from(if you want to import complete data don’t change any settings) and make sure Include subfolders is checked. You can either import the file to the current folder or choose the folder.

Hope this helps!

Dave
 

Read other 3 answers
RELEVANCY SCORE 49.2

When the meeting is opened as “this occurrence” or“Open this series”, the “Cancel” button is completely missing from the
ribbon. It shows me as the "Organizer", but only "Delete" is available.
 

Read other answers
RELEVANCY SCORE 49.2

Good morning everyone,
 
So the other day something incredibly weird had occurred. I was receiving email normally on my phone, came into work, logged in, and began working on my trouble tickets. I noted that when I went back to Outlook to view an email, the email in particular was gone... and then all were gone. My folders, and emails within them, still remained the same. I attempted to research what on Earth happened but I haven't been able to find anything specific to my issue.
 
I'm using Outlook 2010 connected to an Exchange 2010 server for work. Outlook was setup as cached exchange mode but that has since been changed. The emails also disappeared from my phone's inbox too... it's as if everything was deleted and Exchange figured that's what it should be and synced everything that way. Deleting my OST didn't resolve or resync anything. I ran the scanpst tool on the ost file which reports 93 errors, but as I read the scanpst tool can't repair an OST and thus doesn't do anything.
 
Does Outlook have some sort of log that may explain what on Earth happened? I can't find any error messages or any other reasons for what may have happened. My view settings weren't changed, nothing has changed on my end. There is no spyware / malware installed on the PC as far as I can tell. No real issues in the Sync issues folder other than a Forms syncing issue which seems to be related to Exchange needing a patch (but can otherwise be ignored).
 
I will give you... Read more

A:Outlook 2010 / Exchange 2010 randomly deleted inbox email?

Are you the only person using that Exchange server who has this issue? Check with the IT department to see if they can recover the emails in your mailbox from the server. It's possible they recently did some maintenance on the mail server that caused this issue. That fact that both Outlook and your phone are having this issue points to this being an Exchange server problem, as Outlook uses autodiscover and MAPI while your phone uses ActiveSync to connect to the server.
 
Do you have access to your email using Outlook Web Access? If so, log in and see if the emails are there. If not, it's definitely a server issue.
 
If your mail is still on the server, one thing you could try is re-enabling the cached Exchange mode, saving the change, and then restarting Outlook. The last thing to try is to delete the email account profile and recreate it. Make sure to get the proper settings from IT if you don't already have them -- although since you are using Exchange and autodiscover, that's usually just a case of entering your username and password when you recreate it.

Read other 14 answers
RELEVANCY SCORE 48.8

I'm running Windows 7 Professional and just upgraded IE from 9 to 11. Afterwards, I observed that Outlook 2010 was not downloading pictures (instead showing red x's) and Excel 2010 embedded internet queries stopped working. 
I think I've cornered the problem, but can't seem to fix. I have also observed that IE's temporary internet files (TIF) folder may be missing (Internet Options>Browsing History>Settings>Temporary Internet Files shows nothing under Current Location)
and the allotted disk space is set to zero and cannot be changed. If I input another number (no matter the number), I receive the following error message:
"Please select a value between 8 and 8 for how much disk space Temporary Internet Files may use."
I have tried renaming the following RegEdit keys, but to no avail: Cache and LowCache (both under HKEY_CURRENT_USER>Software>Microsoft>Windows>Internet Settings>5.0). They get replaced when IE11 is re-opened.
The actual values within the registry keys are as follows:
Cache>Content>CacheLimit = 8192 (Decimal)
LowCache>Content>CacheLimit = 256000 (Decimal)
This is driving me crazy. Any help would be greatly appreciated. 
-David

Read other answers
RELEVANCY SCORE 48.8

I'm running Windows 7 Professional and just upgraded IE from 9 to 11. Afterwards, I observed that Outlook 2010 was not downloading pictures (instead showing red x's) and Excel 2010 embedded internet queries stopped working. 
I think I've cornered the problem, but can't seem to fix. I have also observed that IE's temporary internet files (TIF) folder may be missing (Internet Options>Browsing History>Settings>Temporary Internet Files shows nothing under Current Location)
and the allotted disk space is set to zero and cannot be changed. If I input another number (no matter the number), I receive the following error message:
"Please select a value between 8 and 8 for how much disk space Temporary Internet Files may use."
I have tried renaming the following RegEdit keys, but to no avail: Cache and LowCache (both under HKEY_CURRENT_USER>Software>Microsoft>Windows>Internet Settings>5.0). They get replaced when IE11 is re-opened.
The actual values within the registry keys are as follows:
Cache>Content>CacheLimit = 8192 (Decimal)
LowCache>Content>CacheLimit = 256000 (Decimal)
This is driving me crazy. Any help would be greatly appreciated. 
-David

Read other answers
RELEVANCY SCORE 48.8

Hello All

Win 7 Prof 32 bit
Office 2010

I've been trying to create a Task in Outlook from a Word Document that I have created on this computer. The idea is that a shortcut to the document is created as an Outlook Task. Click on the shortcut, and voila - there is the document.

The "Create Microsoft Office Task" icon DOES send the document to Outlook as a Shortcut in a Task, however, when I open the task, Outlook says:"Outlook blocked access to the following potentially unsafe attachments: Shortcut to 'document name'."

It's NOT an unsafe attachment; Outlook WILL OPEN this document if I send it as an email attachment. Outlook will open .docx files types.

This is a one person computer...no network, no sharing. And this problem has been driving me crazy. This would be a wonderful feature, if I can get it to work.

Anyone have any ideas what I (or Outlook) are doing wrong?

Thanks for your help
Barb

A:Creating a Task in Outlook 2010 from a Word 2010 Document

I think this will do the job for you:
Add & Create Outlook 2010 Tasks From Word 2010

.





Quote:
You can create a task from Word 2010 document and save it under Outlook 2010 tasks. This feature is by default concealed but you can make it apparent on Quick Access toolbar and use it directly.

In order to use this feature, you need to make this feature apparent on Word 2010 Quick Access Toolbar, head over to Quick Access Toolbar and from small drop down button click More Commands.

You will reach Word Options dialog. Hit drop-down button present beneath the Choose commands and select All Commands. Now scroll-down the list and find Create Microsoft Outlook Task command. Select it and click Add (>>) to show it on Quick Access toolbar pane. Once added, hit OK.

First save the document and then select any portion of the text in the document from which you want to create the task, from Quick Access toolbar, click Outlook task button.

Upon click, it will create Outlook task for the Word document and you will reach Outlook Task dialog where you can set Start and Due date for the task and add more information about it. Save & close the task to view it under Outlook tasks.

When opening task in Outlook 2010, you can also view the document from which it was created from, just double-click the document to open it.

Read other 4 answers
RELEVANCY SCORE 48.8

I had a problem with Outlook emails hanging up in the outbox and then sending as many as 14 copies of the same message. I was unable to fix this Using the "Repair" function of the upgrade installation disk (created from the downloaded file). I removed Office completely and tried to reload; however, my disk got corrupted and Outlook is no longer available. Is there a way to recover Outlook without having to purchase it separately? I am using Office Professional Plus 2010 Home Use Program. The email that came with the original download from Digital River states to go to the "Account Management Console" to reload; however, this is on a hard copy and the original email with the link is no longer available. Any help will be greatly appreciated.
 

A:Solved: Outlook 2010 missing from Office Professional Plus 2010

If you downloaded this from Digital River, then you may be able to download it again, contact them and ask.

If you can download the install file again and it works, burn yourself a CD of the downloaded install file.

Also write the keycode on the CD.
 

Read other 2 answers
RELEVANCY SCORE 48.8

I've been reading around and it appears lots of peopel are experiencing this issue. Has anyone managed to fix this annoying issue of the cursor jumping around in when typing. I'm using a sony vaio laptop , windows 7 ?????
 
 

A:Cursor Jumping In Windows 7 , outlook 2010 , word 2010

Hi jezrp,
 
Does the issue occur in other applications such as Notepad? If the issue only occurs in Microsoft Office 2010, you can post a thread on Office 2010 Forums.
 
However, if the issue occurs in other applications as well, please try the following suggestions to see if the issue can be resolved:
 
If the issue persists after installing the latest drivers which are compatible with Windows 7, the issue can be caused by the factors including third party software, device driver, touchpad settings, virus or spyware infection.
 
Please see if the following suggestions can resolve the issue:
 
-    If the issue occurred after installing certain software or hardware, please remove it to check the result. Or, you can perform System Restore to restore to the date before the issue first occurred.
 
-    Scan your system using anti-spyware and anti-virus software to confirm the system is clean.
 
-     Check the touchpad's sensitivity if it is available. You can simply disable the touchpad to test the result. You shall contact the device manufacturer directly to confirm the settings.
 
-    Use a mouse pad for better mouse performance.
 
-    Replace the mouse and check the result.
 
Regards,
Linda
 
 
 

Read other 57 answers
RELEVANCY SCORE 48.8

I updated my Sprout Workspace to get the new 3D Capture application.  After installing I can now longer launch the app and I get the error message "Unable to configure Sprout for 3D Capture".   I did a complete reinstall of Windows 8.1 and went back to the original Sprout Workspace and 3D Capture and everything works fine.    Has anyone had this issue before and solved the problem?

A:Unable to configure Sprout for 3D Capture

I reverted to Sprout Workspace 1.04.4.3241 Rev B. Problem solved.  I went  to:  http://support.hp.com/us-en/drivers/selfservice/Sprout-by-HP/7471144/model/7471145#Z7_3054ICK0KGTE30... then paged down to software solutions and downloaded  and installed previous version 1.0.4.3241 Rev.B  (see the following )   

Read other 1 answers
RELEVANCY SCORE 48.8

Hi All,
I am trying to configure ATA Lightweight gateway on additional domain controller. I am getting the error.
The Console, https://ata.domain.com,  returned an error while attempting to register  the gateway. For more details, please review the Center error logs.

I can open https://ata.domain.com from the DC without any issue and the Port required for the communication is open.
There is no error in Application or system logs on DC or ATA server.
Center error logs in ATA is also not pointing to any error.

Thank you for assistance.

Read other answers
RELEVANCY SCORE 48.8

I have an Asus wireless WL-520GU that I have a wired connection to my PC. Why, because I am using the wireless only to allow access to my webradio.

Problem is the web radio connects 50% of time. Other times to connect I need to manually configure on webradio to connect to connect to wireless. It works sometimes other times not. I haven't been be to get to point of securing the SSID. So probalby someone is stealing my bandwith.

Now to explain my setup, my modem is connected to my Linksys 2102 adapter (used for VOIP) which to connected to the Lan port on the router.

I can surf the web on the PC, but trying to establish a connection, the PC does not recognize a wireless device. I cannot even access the Asus web interface (192.168.1.1)

My default gateway is 192.168.0.1 that of the Linksys adapter,

How to enable SSID so I can lock it and I can access the wireless problem-free from the web radio (Aluratek) ?
 

A:Unable to configure wireless router

Read other 16 answers
RELEVANCY SCORE 48.8

I am unable to configure Windows Firewall and Security Center settings on a Windows XP SP2 operating systems. Windows Firewall is disabled. I cannot use the Windows Firewall tool in Control Panel to turn on Windows Firewall or to configure Windows Firewall settings on the Windows XP SP2 computer. When I try to configure Windows Firewall settings, some options are appear dimmed, and I receive the following message: "For your security, some settings are controlled by Group Policy."

In addition, my Internet Explorer default settings are not available.
Recently I removed trojan.cachecachekit and had made the assumption this problem was caused by the trojan. System Restore is not an option because in following the Symantec instructions to remove the trojan I reset the restore date. Can you please help me get my system back to its original configuration?

Thanks! Nica

A:Unable to Configure Windows Firewall

You may not have removed the trojan.cachecachekit completely. IMO I would follow the instructions here http://www.techsupportforum.com/showthread.php?t=15968. Also read this http://www.techsupportforum.com/showthread.php?t=59099.

Read other 6 answers
RELEVANCY SCORE 48.8

as you can see the properties button does not lit up and remains grey out although i click on IPV4, why is this happening? i was open it a few years ago

A:Unable to configure network properties

Have you done this? Change TCP/IP settings

Read other 9 answers
RELEVANCY SCORE 48.8

Gooday all. I have a laptop set up for my entertainment area. I am using an HDMI cord from laptop to a screen and using the sound output to a set of surround sound speakers. This a pretty cheap set up,nothing fancy. I am trying to get all the speakers recognized by my Realtek Sound Management application. The Lasptop (http://speccy.piriform.com/results/J...8QITBgvOYgX6Ol) is only recognizing a 2 speaker stereo set up. How am I able to change this so as to be able to adjust settings to the 6 speakers of the system. Thanks in advance.

A:Unable to configure speakers on Laptop.

Looking at the Speccy, I don't see anything other than RealTek HD Audio. If the laptop has a RealTek HD Audio Manager, have you tried setting the speaker type there?

Aside from the audio issue, I notice you only have 2GB of RAM. The 64 bit OS does you no good with only 2GB of RAM, and can be an issue with only the 2GB which is bare minimum for a 64 bit OS. The main reason for using a 64 bit OS is to use more than 4GB of RAM, since a 32 bit OS cannot address 4 GB (or more) of RAM.

Read other 2 answers
RELEVANCY SCORE 48.4

I have a .edu email address that I access through BlackBoard. I'm not sure if every school that uses blackboards email services uses Outlook Web Access by defualt or not, but I was wondering If you could help me configure Outlook to be able to send and receive my schools email.

I googled around a bit and nothing really seemed to help.
The current settings I have now are attached
 

A:How to configure Outlook with Outlook Web Access

Read other 9 answers
RELEVANCY SCORE 48.4

Hi all,

this maybe a tricky one, im not that techi so please bare with me

I am using MS office 2010

when I try to link an access database to an outlook folder using the:

home ribbon > External Data > import & Link > more > outlook Folder.

after I click on the "outlook folder" option, nothing happens.

absolutely nothing. no warning, no error, no not responding.. nothing at all.

I spent hours and hours looking for solutions, messed other parts of my computer and still no success

I need to link to my outlook contact. please help

http://www.youtube.com/watch?v=TF1RYvwpeeE this may sound silly I uploaded a video on you tube asking for help.
 

A:Access 2010 Linking to outlook folder 2010

As a work around...Export your contacts from Outlook to csv then import (text) to Access. File > Options > Advanced...Export is midway down the page
 

Read other 1 answers
RELEVANCY SCORE 48.4

Every day I send out excel documents that I then convert to pdf's. I use the same excel template on each document. The only thing that changes in each document per recipient is the "name" "company" & "email" fields in the excel document.

Question: Is there a way I can get these documents to interface with outlook so that when I select more than one person to receive the document (as many as 30 people will receive the same document), and auto populate the contact info "name" "company" "email."

This way would save me a few steps so that I don't have to pick a contact... type all their info in the fields... send. Select my next contact... enter appropriate info in the fields... and repeat and repeat.

I'm emailing job specific information to everyone working on the same job. I'm sending it to multiple people, but need it to look like they were the only one who received the document. Just like when you get an email about the "deal of the week" that says, "Dear Mr. Johnson, How's your summer going?.... " while someone in NYC gets the same letter that says "Dear Mr. Thompson, How's your summer going.... " from the same sender. Of course the deal of the week changes each week.

How can I make this happen? If there is a better way outside using excel to create pdfs, or a totally different method entirely. I'm all ears. I just need to send the informatio... Read more

Read other answers
RELEVANCY SCORE 48.4

Hi all,

this maybe a tricky one, im not that techi so please bare with me

I am using MS office 2010

when I try to link an access database to an outlook folder using the:

home ribbon > External Data > import & Link > more > outlook Folder.

after I click on the "outlook folder" option, nothing happens.

absolutely nothing. no warning, no error, no not responding.. nothing at all.

I spent hours and hours looking for solutions, messed other parts of my computer and still no success

I need to link to my outlook contact. please help

http://www.youtube.com/watch?v=TF1RYvwpeeE this may sound silly I uploaded a video on you tube asking for help.
 

A:Access 2010 Linking to outlook folder 2010

Works like a charm on mine.
 

Read other 3 answers
RELEVANCY SCORE 48.4

Hi all
Having totally WIPED office 2010 from my system and re-installed again the problem I had with the "Purge" folder not appearing now is SOLVED.

However you still don't get a line through the deleted items -- but they are in Trash folder now.

This is BETTER but still NOT WHAT IS NEEDED -- as another computer with Outlook 2007 doesn't get the "Non purged" items in the inbox which it should do.

IMAP should effectively leave items in the Inbox until purged -- otherwise I might as well go back to POP3 - more fiddly to manage whern you leave stuff on the server but it works.

What I'm resigned to doing now is to use the REST of the office 2010 suite (EXCEL etc) which is really good but stick with Outlook 2007 for email.

Cheers
jimbo

A:Outlook 2010 Saga with IMAP, Can I use Office 2010 and

I do like the way 2010 deletes the emails without purge, but I have found that rules randomly fail and some mail goes awol for a while when switching between folders (it reappears after a while)

IMO outlook 2003 is still the best (I hated 2007) but I will reserve full judgement until 2010 is out of beta.

Read other 1 answers
RELEVANCY SCORE 48.4

I constantlly get error_not_found 0x80070490 when trying to install updates.

The Microsoft website says its a CBS issue and that the resoloution is to run a repair installation of Vista. Thing is the software was pre-installed so i have no disc and i'm unsure how to run a restore without an OS disc and also without wiping everything accidentally.

HP say speak to Microsoft, Microsoft say speak to HP.

Any ideas how i fix this one before the PC flies out the window ?????

A:Unable to Configure / Install Vista Updates

Hi -

See if this tutorial helps --> http://www.vistax64.com/tutorials/88...all-vista.html

If no Vista recovery DVD, use the recovery partition - most systems = hit the F10 key during boot-up.

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 48.4

Windows XP Home Ed. My Dell laptop computer loses this setting and I have to reset it each time I start the computer. It looks like this may be because the "Apply" button is dimmed in the Wirelss Zero Config. Properties Window so that I can only click "OK". Have any suggestions?
 

Read other answers
RELEVANCY SCORE 48.4

When I go to gameplay config controls, it only has the keyboard but when I toggle to any other devices it doesnt even have an option for my gamepad. But windows reconizes the gamepad just fine and it works fine. Just cant config it. Is it something with the game itself or the gamepad. Cause I dont know if I should return the pad or what. I have a MadCatz PC Con USB Controller
 

A:Unable to configure gamepad in Need for Speed Underground 2 - plz help!!!!

Read other 7 answers
RELEVANCY SCORE 48.4

Hi

When I am in Internet Options, Advanced Tab, when I click on an item, it will highlight, but can't click to enable or disable. I am using Mozilla as my primary browser, but don't know if this has any relevance! One
of the main reasons is that I keep on getting an error message from Java (please see log below):-

Additionally, I also receive errors such as FDGO.exe, NTDLL.dll etc etc. I have no idea what I am doing wrong, so would much appreciate all and any help possible!
JavaJava Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot™ Client VM

----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
----------------------------------------------------

Many thanks
Nat

A:Unable To (click) Configure Internet Connections

Uninstall your Java and any Java plug-ins, then reboot your computer. After that, go and try the same things again in your browser options. If everything works out fine, just reinstall your Java and any plugins you may want.

Read other 1 answers
RELEVANCY SCORE 48.4

Hello all.

My Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.

This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".

Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't helped (it actual... Read more

A:Unable to 'configure' Windows updates since 'refreshing' l

Have you tried system restore to a good working spot
before format you can use reset factory settings
you can try this in safemode
http://download.microsoft.com/downlo...nostic.diagcab
give a boot from your DVD and give automatic repair a try

Read other 10 answers
RELEVANCY SCORE 48.4

Hi everyone,
I'm unable to configure WinRM on a domain computer. I have a simple domain with

1) Windows server 2012
2) A client running Windows 7

If I try to run WinRM on the local Administrator, everything works fine, but if I switch to a domain user, than problems occured.

For example, if i run winrm quickconfig in powershell as the domain Administrator, then I get:

WinRM already is set up to receive requests on this machine.
WSManFault
    Message = WinRM cannot process the request. The following error occured while using Negotiate authentication: An unknown security error occurred.
 Possible causes are:
  -The user name or password specified are invalid.
  -Kerberos is used when no authentication method and no user name are specified.
  -Kerberos accepts domain user names, but not local user names.
  -The Service Principal Name (SPN) for the remote computer name and port does not exist.
  -The client and remote computers are in different domains and there is no trust between the two domains.
 After checking for the above issues, try the following:
  -Check the Event Viewer for events related to authentication.
  -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use
 HTTPS transport.
 Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configura... Read more

Read other answers
RELEVANCY SCORE 48.4

I have created accounts on Yahoo and Gmail. Now i want to configure these for Outlook & it is asking me details like Outgoing/Incoming server and Port no. what is SMTP . Can u tell me what to do .

Regards
 

A:Outlook Configure

gmail help
http://support.google.com/mail/bin/static.py?hl=en&page=ts.cs&ts=1668960

yahoo help http://help.yahoo.com/l/uk/yahoo/mail/yahoomail/pop/pop-114.html;_ylt=ArDjqCrYbS4Y7YX62nSjWJWUwCN4
 

Read other 1 answers
RELEVANCY SCORE 48.4

hi,
i am new to outlook. i have just installed outlook on my pc. i dnt know how to add email account or manage it. and what is the term outlook connector and what is use of it? can i add gmail and yahoo account also in outlook? can my differrent accounts work together in outlook?
thank you.
 

A:how to configure outlook?

Hi testbysunny

The Outlook Connector is a free program you can download to collect your Hotmail account messages.
Download the Outlook Connector here:
http://www.microsoft.com/downloads/...89-af2e-41f9-a175-f93e1377959f&displaylang=en

More about the Outlook Connector:
http://office.microsoft.com/en-us/outlook/HA102225181033.aspx
You must have a paid subscription to Yahoo to be able to download messages onto your hard drive.
If you do not, then the answer is "No", you cannot setup Yahoo in Outlook.
Yes, you can configure your Gmail account in Outlook:
Login to your Gmail account and click on the Settings link at the top right of the page.
Then click the Forwarding and POP/IMAP tab.
There you can enable POP access to Gmail.

What version of Outlook are you using?
Help > About will tell you.
 

Read other 3 answers
RELEVANCY SCORE 48.4

Hi, How do i configure Outlook Express 2003 for an MSN email account?

Thank You
 

A:Configure Outlook

How to configure MSN to work with Outlook 2002 and with Outlook 2003
If you mean Outlook 2003, not Outlook Express
 

Read other 3 answers
RELEVANCY SCORE 48.4

Am a first timer in this forum and i need a guide on how to configure outlook on my system.Would really appreciate your assistance.

A:how to configure outlook

http://products.secureserver.net/ema...il_outlook.htm

Read other 1 answers
RELEVANCY SCORE 48

After restoring my new laptop back to factory settings (to fix problem I was having with MSE), I find that I am now unable to configure my restore points. I am trying to increase the storage space so I can have several restore points. When I click 'Apply' or 'Okay' after changing the space allocation, the following error appears:

"The filename, directory name or volume label syntax is incorrect. Error 0x800707B"

The following drives appear in the Restore Config window with Restore set to 'On':

System_DRV
Windows7_OS(C:)(System)
Windows7_OS(C:)(Missing) -- this seems odd to me

For background info, I restored to factory settings and added MSE and then other programs one-by-one. After programs were re-installed, I restored my data from the previous night's backup. Everything is working fine and there are no system errors that I can see.

Would anyone have any insights on this problem?

A:Unable to configure restore points - Error 0x800707B

  
Quote: Originally Posted by hallydai


After restoring my new laptop back to factory settings (to fix problem I was having with MSE), I find that I am now unable to configure my restore points. I am trying to increase the storage space so I can have several restore points. When I click 'Apply' or 'Okay' after changing the space allocation, the following error appears:

"The filename, directory name or volume label syntax is incorrect. Error 0x800707B"

The following drives appear in the Restore Config window with Restore set to 'On':

System_DRV
Windows7_OS(C(System)
Windows7_OS(C(Missing) -- this seems odd to me

For background info, I restored to factory settings and added MSE and then other programs one-by-one. After programs were re-installed, I restored my data from the previous night's backup. Everything is working fine and there are no system errors that I can see.

Would anyone have any insights on this problem?


Turn off SR, you can read help to find out how.
Turn off computer
Boot up
Turn on SR
May not work, but it does 3 out of the 5 times the problem was on this board.

Read other 5 answers
RELEVANCY SCORE 48

I have an application running 24/7 which occasionally loses the ability to pause or configure it by right-clicking on the systray icon.
Is there an alternative method of doing this, or is a reboot the only answer?
(The programme is [email protected]).

Cheers

A:Unable To Configure A Running Appn From Systray Icon

I am not sure what your question is.Do you interact with this or is it a remotely controlled client allowing the use of your computer's unused processing power by the research group?If the program stalled, you may be able to look in the task manager (ctrl/alt/del), highlight the running ap by right clicking on it, choose "go to process" , then right click on the process which will be highlighted and choose "set priority". Try elevating the priority.I suggest you write down what you did so you can reverse it if necessary.There is also a Bulletin Board for this. They might have or be able to provide specific information on the ap:http://forum.folding-community.org/There's also a wiki that may help answering questions:http://fahwiki.net/index.php/How_tos

Read other 4 answers
RELEVANCY SCORE 48

Hello everyone,

I'm about at my wit's end trying to figure out my problem and finally decided I should ask the pros for help, since an exhaustive search of the interwebs has turned up nothing. I'm a hobby PC user so please be patient with me. So here is my problem.

I recently bought all the stuff to build an HTPC/gaming rig for my girlfriend and I and I wanted to set up RAID 1 but no matter what I try, I can't get it to work. Here is my rig.

ASRock H77 Pro4-M mobo
Intel i7-2600
(2) 2TB Seagate Barracuda 7200 rpm; 6.0GB/s HDD
(4) 2GB G.SKILL Ripjaws DDR 1600 RAM
EVGA GeForce GTX 550 Ti Video Card
Cooler Master 600W Silent Power supply

I think that's about it.

Here is what I've done.

I went into bios and set my storage configuration to RAID. After, I saved and exited, and allowed the machine to reboot. When it did, I pushed Ctrl + I to enter the RAID volume setup menu. I labeled the volume, chose RAID 1, selected my drives, selected my size, and saved and exited. Then I booted from my Windows 7 Home Premium 64 bit (Dell OEM, if that matters). I selected my regional settings, and when prompted, accepted the terms and selected "Custom" install. At the drive select screen, I saw one disk, which I believe is what I should see. I highlighted the drive and selected "Load Drivers." I used the driver labeled with the arrow in the attatched image. I got it from my mobo's website found here ASRock > Products > H77 Pro4-M. After the driver loaded, I re... Read more

A:Unable to configure RAID on Windows 7 Home Premium

Why do you want RAID? WIn7 doesn't much like RAID which isn't even Redundant so risks losing both HD's if one fails. Better to install to one HD and use the other for backing up an image.

If you saw one correctly-sized RAID array when you booted into the installer to try hardware RAID then the driver wasn't needed as it's only loaded when no drive shows up. Try again.

Read other 9 answers
RELEVANCY SCORE 48

Hi, I recently purchased a pair of Corsair Vengeance 2000 wireless USB headphones. However, when I installed them and tried to use them, I came across a rather unusual problem. I couldn't test them, or set them as default device, or configure them. It's like Windows doesn't recognise them. All the drivers are installed correctly .

I have also tried them on another computer, with the same version of Windows and they worked fine, so I know that there is no problem with the headphones.

I am running RealTek HD audio just incase it is needed.
Thanks

A:Unusual problem: No sound bar for headset and unable to configure them

Sounds like they could have a corrupt status in Windows. Connect the headphones then go to the Device Manager, either the headphones will be listed in the sounds and audio devices or there will be an unknown device listed in the USB section. In either case, RIGHT click on the entry and then LEFT click"Uninstall". Then disconnect the headset and restart the PC. After Windows starts, connect them and Windows should detect and install them, like a new installation. This may take care of the problem.

Read other 9 answers
RELEVANCY SCORE 48

Hi all my friend,
I have a (Air Access) - ZG-5000-11g Wireless Outdoor Bridge , Ap Router, It has hanging problem, so I make it factory default. but now I have unable to configure it. so plz some one help me to find out default ip address.. plz help me&#8230;
 

A:Solved: unable to configure router after factory reset

Read other 7 answers