Over 1 million tech questions and answers.

System Restore is not working creating/Restore

Q: System Restore is not working creating/Restore

When Im trying to resotre the system restore. It give no effect.
When Im trying to create the restore point. It gives the follwing message "System restore is not able to create a resotre point. Please restart the computer, and then run the system restore again"

And also I have update problem in the F-Secure anti virus.
And also I have a booting problem, after boot windows xp icons apperars when I was click any icon it hang.

RELEVANCY SCORE 200
Preferred Solution: System Restore is not working creating/Restore

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: System Restore is not working creating/Restore

click on start then control panel then system in there you should see system restore. clcik on it , make sure you tick off Turn off on all system drive then click ok then go back to restore again. unless you have corrupted window which means you need a new window installation. good luck

Read other 1 answers
RELEVANCY SCORE 94.8

For some reason my System Restore function isn't automatically creating (or isn't showing) System Restore points as it should be doing for "major" system events (e.g., isn't automatically creating restore points before/after Windows Updates and software/driver updates). I'm not sure if it isn't creating the restore points at all, or if it's just not displaying them as available restore points.

Another piece of the puzzle - I've manually created restore points at various times, and they have initially shown up on the list of available restore points as expected. However, when I looked at the list today, the restore points I created manually have Disappearead! I'm certain that I didn't delete them. I've selected every option I can think of to show me a complete list of available restore points, but no luck getting them to show up on the list. Also, my "Current Usage" is listed as "0 bytes", even though a few restore points are showing on the list. All of this makes me wonder if the system is creating the restore points, but just saving them in a way that makes them "invisible" to the System Restore utility.

Here's what I've done so far:
- Double checked my System Restore/Protection settings, and my system drive (C: ) is definitely set to "ON".
- Checked the System Restore configuration, and it's set to "Restore system settings and previous versions of files"
- Checked the "Disk Space Usage" for storing s... Read more

A:System Restore isn't creating (or saving?) restore points properly

How often do you defrag and what program do you use for defragging?

Read other 9 answers
RELEVANCY SCORE 94.8

My last automatically System Restore Point automatically created by the passage of time was created 2013-01-23.

No further automatic system restore points are being created (that means not ever, not daily, not weekly, simply no longer created automatically by the passage of time since last January).

I do not see restore points automatically created by other programs, like Acronis 2014 or Kaspersky KIS 2014 which I installed last week. (But the problem goes way back to January, so these new versions are obviously not involved.)

System restore points are still automatically created by Windows Update and by nVidia driver updates.

System restore points can still be created manually.

The SR task is present in Task Scheduler.

SFC /SCANNOW found no problems.

System Restore is still turned on.

There is free disk space for restore points.

The computer is a Dell Studio 9000, aka XPS 435T, core i7 960.
Windows 7 Home Premium with all the standard Windows Updates.
KIS 2013, now KIS2014
Acronis 2013, then 2014, and currently uninstalled.

A:System Restore Has Stopped Automatically Creating Restore Points

Hiyya Keith mate run a chkdsk as well as the sfc you have done already and also these I know you have Kaspersky and so do I (2013) but I still pick up malware with the links .

Disk Check

download the ADW from bleeping computer and if you have CCleaner the run a clean up don't forget to save the cookies that you have that use passwords for site s you need and the registry check any faults back them u before you fix.


http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/

CCleaner - Download > download from piriform - you probably have but if not....

Read other 9 answers
RELEVANCY SCORE 94.8

Since upgrading system restore is not creating restore points automatically. I have to create them manually and then they are being deleted automatically every 3 - 7 days. I tried allocating more disk space to restore but that has done no good. I also use an uninstaller program which used to create restore points but although it tells me it is it's not! I feel very vulnerable now only having a week's worth of restore points - there have been times I've been glad to be able to restore back a few months! Never had trouble before the latest upgrade and haven't knowingly changed any settings. Be very grateful if anyone can solve this for me. Thanks Flissa

Read other answers
RELEVANCY SCORE 94

Hi;

Brand new laptop running Vista 32-bit. Went to verify that System Resore was periodically creating restore points, and despite the app appearing to be set-up correctly, there are no auto restore points listed- just the ones generated by various software chages. Any suggestions what's going on because as mentioned, the feature is active- just not automatically establishing restore points-

Many thanks in advance
Webz
 

Read other answers
RELEVANCY SCORE 94

System Restore is no longer creating automatic restore points. All the necessary services are set to automatic, ie: task scheduler, volume shadow copy, microsoft software volume shadow copy, windows backup, and remote procedure call.

I tried disabling SR, then performed a disc cleanup, rebooted, then enabled SR. All that did was enable me to create ONE system restore point ONLY. If i try to create an additional restore point, I get the following error message:



Help!!

abe

A:System Restore not creating automatic restore points

Hi,

You might want to try






Quote:
Do you have any security software installed on the computer?
Are any third party backup programs installed on your computer?
Verify if these two services are started and running on your computer. If it’s not started, start the services and check if you can create a system restore point.

a) Volume Shadow Copy service
b) Windows backup

Also ensure that their dependency services are running.
Verify if their dependency services are running.

You can check this information from services.msc. To do this follow the steps below:

a) Go to start and type services.msc in the search field.
b) Locate the two services.
c) Right-Click on the service one at a time.
d) Select properties.
e) Go to Dependencies Tab.
f) Note the dependency services.
g) Make sure they’re also running.
h) To start a service, right click on it and select start.


From many users facing the same issue, turning off system restore for the hard disk on which Windows is installed and turning it back on seems to have solved the issue.
You may try the same.


Original Source
OS

Read other 2 answers
RELEVANCY SCORE 92

I went into Task Scheduler and set System Restore to create a restore point every day at 12:01am. Under Conditions I cleared all the check boxes because I want SR to run regardless of whether computer is idle or not. I have been watching this for about 1 week and so far it's not created a single restore point. Under History there's no entry, and the tab itself actually say "History (disabled)", not sure what that's about. Suggestion?

A:System restore not creating restore point

Maybe something here will help: Change How Often System Restore Creates Restore Points in Windows 7 or Vista - How-To Geek

Says 7 and Vista but should apply to 8 as well.

I've not tried it yet though.

Read other 17 answers
RELEVANCY SCORE 92

My system restore is no longer creating any restore points, I have to do it manually. About 3 weeks ago I had a virus that I believe I got rid of using HiJackThis. That virus shut off my system restore so that it could not be used and at that time I lost all my restore points. Now my computer seems fine except for the system is not creating any NEW restore points. Any advice? I'll include my Logfile...

Logfile of HijackThis v1.99.0
Scan saved at 6:46:14 PM, on 2/22/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\Program Files\Weather Network\WeatherEye.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\WINDOWS\system32\drivers\dcfssvc.exe
C:\Program Files\HijackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.secularbull.com/
R3 - Default URLSearchHook is missing
N3 - Netscape 7: user_pref("browser.startup.homepage", "http://secularbull.com"); (C:\Documents and Settings\Kelvin Kolman\Application Data\Mozilla\Profiles\default\rfaavem5.slt\prefs.js)
N3 - Netscape 7: user_pref... Read more

A:System Restore Not Creating Restore Points

Right click my computer>properties>system restore and make sure there is no check in " turn off system restore"
 

Read other 3 answers
RELEVANCY SCORE 85.6

I have Windows Defender and McAfee Security Center anti virus softwares.When I run them they are telling that I does'nt have any virus.But I am unable to Go to previous restore points and many exe files are missing in the C:\Window\System folder."Warning! Spyware detected on your computer. Install an antivirus or spyware removal to clean your computer." error came on the desktop.Whole desktop was white with an orange color box in between with the above warning.Antivirus2008 something like that was installed on the desktop and in the control panel...so 1. first I removed the software icon from the desktop and the control panel.Next I went to System32 and removed the recent files.2, But I was Unable to restore to go to a previous date to get rid of the virus.My System restore is infected I believe.I don't have that much knowledge in this field.So kindly let me know in detail what I can do to remove the whole virus.Yes System restore was working properly before.I noticed this as soon as the the virus came. I have ran the Malwarebytes Anti-Malware but still I am unable to go back to my previous system restore points and system is operation very slowly...Please find the log file here:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:18:56 AM, on 8/20/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system3... Read more

A:Unable To Restore My System To Previous Dates, Clicking On The Back Arrow On The Restore Calender Is Not Working

Hello Ashakins and welcome at BleepingComputer,Sorry to have kept you waiting for so long, but the forums are really busy.If you still need help :Please don't run 2 active virusscanners at once, make a choice and remove the other one completely through Control Panel > Software, along with SweetIM.1. * Clean your Cache and Cookies in IE:Close all instances of Outlook Express and Internet Explorer Go to Control Panel > Internet Options > General tabUnder Browsing History, click Delete. Click Delete Files, Delete cookies and Delete historyClick Close below.* Clean your Cache and Cookies in Firefox (In case you also have Firefox installed):Go to Tools > Options.Click Privacy in the menu..Click the Clear now button below.. A new window will popup what to clear.Select all and click the Clear button again.Click OK to close the Options window* Clean other Temporary files + Recycle bin Go to start > run and type: cleanmgr and click ok. Let it scan your system for files to remove. Make sure Temporary Files, Temporary Internet Files, and Recycle Bin are the only things checked.Press OK to remove them.2. After reboot,Start HijackThis, close all open windows leaving only HijackThis running. Place a check against each of the following, if still present :O2 - BHO: (no name) - {02478D38-C3F9-4efb-9B51-7695ECA05670} - (no file)O4 - HKLM\..\Run: [SweetIM] C:\Program Files\SweetIM\Messenger\SweetIM.exeClick on Fix Checked when finished and exit Hij... Read more

Read other 1 answers
RELEVANCY SCORE 84.8

Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.

A:Automatic restore points is not working in system restore

Hello Rocasan,

Double check to make sure that System Protection is turned on for your Windows drive.

Next, use the free program CCleaner to see what it shows for what restore points you may have like below.

Hope this helps for now,
Shawn

Read other 13 answers
RELEVANCY SCORE 84.8

So my little sisters boyfriend deleted all the history on my Google Chrome, 'to free up space' and I think he's been on something weird on my laptop, and want to find out. I googled how to get the history back and the other thing I fully understood was to do a System Restore to back before he deleted it. I did that three times to different points in time, definitely before he did it and it hasn't changed anything. If anyone else has any ideas they would be much appreciated, although please bear in mind I'm not massively great with computers! Thank you
 

A:How to restore Chrome history, system restore not working?

I don't think you can get it back unless you had a backup, System Restore doesn't affect data so that's why it doesn't work.

Why do you need the History restored anyways?
 

Read other 3 answers
RELEVANCY SCORE 83.2

When I try to back up and restore (my files) it does not complete. I get the message disk full. I tried to uncheck the (shut off and delte all files from system restore) but that does not help. When I check the amount of space available on the D drive, it shows as full, but system restore seems to work; any suggestions?

A:Backup and restore (Not System Restore) Not Working

What are you using to backup your system?

Read other 3 answers
RELEVANCY SCORE 81.6

I have been having numerous problems with my computer and am currently in a dispute with the manufacturer about getting it repaired but in the mean time i would like to create a bootable usb drive for if i need to boot/repair windows if it decides not to work.

the problem I am having and have had it before and have been unable to find a fix is that my system won't boot past the 'windows loading' page. I installed my OS using the same disc as I haveon 3 other systems and they all work fine jus this one has the problem. It has been sent back once and worked for a short time which is why I am disputing it being out of warranty.

Anyway enough of that, all i need to know is how o make sure i can safely turn my computer off and on again and an additional way to boot to make sure it will work?

Thanks in advanced
Wisp

A:Creating a USB system restore?

Hi,

Simple write the Windows 7 installation media to a USB drive using this tool.

Windows 7 Media
Windows 7 Direct Download Links

Windows 7 USB Tool
http://images2.store.microsoft.com/p...B-DVD-tool.exe

Regards,
Golden

Read other 8 answers
RELEVANCY SCORE 81.6

This is for a friend. he bought a laptop. The company did not provide him with acopy of the xp installed on it. What can he do if the operating system got messed up and he needs to reformat? Someone said something about ASR, but you can only put it on a floppy disk. Can u create an ASR cd and use it?
TIA
 

A:creating a system restore CD

What I do with such systems is first tailor them to what I think a good starting configuration is, then create a Acronis True Image backup of the configuration on a DVD for the customer. That's their "restore" disk, and it's a lot better than the one that you'd get from any name brand vendor.
 

Read other 3 answers
RELEVANCY SCORE 81.2

i want to restore my buds laptop. he had restore turned on until about 3 weeks ago he shut it off.

question: if you shut off restore does it still keep the last restore points? and is there a way to restore in safe mode (cant boot in reg mode) if restore is shut of. when i try and turn on sys restore in safe mode it say "i cant".

any suggestions?
 

A:System restore question? Can i restore in safe mode i restore was turned off?

when you turn off restore you lose all the restore points...thats why you cant use them...If you can boot in safe mode and backup all the things you can't live without...then we will try to fix the booting problem
 

Read other 1 answers
RELEVANCY SCORE 80.8

ok, this is a really stupid question.

How do you create a restore point on XP through the GUI?

I've looked in Control Panel, system, system restore and found no process to create or restore anything. It must be somewhere else. I've looked at MS documentation on the web, searching on "create a system restore poin" and got documentation on how to do that in WMI in software, but that seems overly teckie, at least for me.

Where do I look? What's embarrasing is I've done this before, but don't remember how.

Please schlep me some hints?
 

A:Creating a system restore point

Read other 6 answers
RELEVANCY SCORE 80.8

Having a problem with system restore. It keeps telling me I dont have enough storage space available to set a restore point. One hd I have 248 megs free and the other 2.4 gig. I never had this problem before and it wont let me delete the restore point from my hd. I am at a loss. Thanks.
KEN
 

A:Creating a system restore point

Read other 16 answers
RELEVANCY SCORE 80.8

I was wondering if my System restore is working properly.

I wanted to roll back a couple of days as i installed java to get a program to run but there seemed to b a problem a few days later so i went to use system restore but there was only one restore point created and was after the java had been installed so i couldn't take it back to before then.

I thought automatic restore points were created or is this not the case?

A:System restore not creating points?

I believe Windows creates a auto restore about every week.
Some Windows Updates will create restore points and sometimes deleting things will create restore points.
You can also create your own restore points when you think you need them.
These Tutorials by Brink should be helpful.

System Restore Point - Create

System Restore

Read other 3 answers
RELEVANCY SCORE 80.8

I just noticed that the system restore is not creating any system checkpoints. Also I cant go back to may because there are not restore points. I had to create a restore point this morning because there was nothing at all for today or any other day. I checked and the system restore is on. I turned it off and back on but there is no change. I would appreciate some input on how to correct the problem.
 

A:System restore not creating checkpoints

Read other 16 answers
RELEVANCY SCORE 79.6

Hi all,
I have Auto Updates set to check for updates but let me choose whether to download and install them.

I have NOT installed any updates since getting the PC as I am still trying to tweak it, will install the updates when I have it fully tweaked/customized.

I also have noticed that I think I get a restore point created each time the PC does a check for updates?
Attachment 242268

Is this actually what is happening when Auto Update is set to this setting?

This is causing the system to create too many of these RPs and drop off older ones I wanted to keep. I do not want to allocate any more disk space to the RPs.

If this is what is causing these RPs to be created, other than not checking for updates at all, is there any way to prevent these RPs from being created?

Never had this happen in Win XP!

Also, where on the HDD does windows store the windows updates removal files?
There were updates installed after the PC was originally loaded with the OS, but even with all files unhidden, I can not find the location of these updates uninstall files.

Tnx a bunch for your help!
Sincerely,
Cindy

A:System creating many more Restore Points than needed

Have you looked at Windows Update History to see if something did get updated when the "Windows Update" RPs were created?
Maybe MS Security Essentials definitions (if you use MSE)?

Read other 1 answers
RELEVANCY SCORE 79.6

I'm using XP Home Ed., and I recently had to restore using a month old restore point. I've since been able to create a more current one only once.
If I try to create another new restore point, I'm getting "unable to create a system restore point at this time. please restart your system and try again."
Tried that many times, no luck. Is there a limit to the number of times this
procedure can be done? Any suggestions are appreciated, thanks.
 

A:Problems creating system restore point

Hi,

See if this aricle applies.
You Cannot Create a Restore Point with a HighPoint Driver Installed
http://support.microsoft.com/?kbid=322246&sd=RMVP

xpshovelhd said:

I'm using XP Home Ed., and I recently had to restore using a month old restore point. I've since been able to create a more current one only once.
If I try to create another new restore point, I'm getting "unable to create a system restore point at this time. please restart your system and try again."
Tried that many times, no luck. Is there a limit to the number of times this
procedure can be done? Any suggestions are appreciated, thanks. Click to expand...
 

Read other 1 answers
RELEVANCY SCORE 79.6

Hello,
I am trying to mess around with my system restore settings because they are eating up alot of my harddrive space.

What I want to do is create one restore point of my current system and then turn off the automatic system restore feature. However, turning off the feature tells me that it will delete all existing restore points and then turn off the automatic ones.

Is there a way to just create one and turn it off?

Thanks

A:Creating single system restore point

Hi, afraid turning it off deletes all restore points. You need to use a third party program for this I use ERUNT and have it instead of system restore. You can create a system backup and restore to that date if you so wish. Will create an autobackup regime of 30 days for you and as it backs up only the registry takes up less then 3.6 Gb per month then deletes oldest and continues. It is a far more complete registry restore then Vista and is invaluable for overcoming Virus and malware problems. Can be run from a windows RE command prompt to restore.

Alternatively you can continue to use system restore just limit the amt of disk space/shadow copy allocated to it (typically 15% so 250 gb has around 37.5 gb set aside) A typical Vista restore needs around 300 mgbs so 4gb is more then enough. Go to start, all programs, accessories right click command prompt and select "run as administrator" at the prompt type:-



Code:
vssadmin Resize ShadowStorage /For=C: /On=C: /MaxSize=4GB
Link for ERUNT:-
http://www.larshederer.homepage.t-online.de/erunt/

Read other 2 answers
RELEVANCY SCORE 79.6

Not sure when this issue started, so not sure if this has anything to do with XP Pro SP3. System Restore appears to function normally until attempt to restore. Select restore point > confirmation screen, click next > result = stays on confirmation screen. No cpu activity. Disabled SR and tried to re-register dll's. Was only able to re-register srclient.dll. Other dll's report loaded but "DllServerRegister point not found. . ." Suggestions please.

A:System Restore runs, creates restore points, but can't restore

Hello & welcome to TSF,

RESOLUTION
To resolve this issue, restart the computer. If the error still occurs, search the hard drive for the presence of the Wininit.ini file, and then rename it. To do so, follow these steps:

1. Restart your computer in Safe or DOS Mode.
2. Click Start, point to Search, and then click For Files or Folders.
3. In the Named box, type wininit.ini.
4. In the Look in box, click Local hard drives, and then click Find Now.
5. Right-click the Wininit.ini file, click Rename, type wininit.xxx, and then click OK.
6. Close the Find Files window, and then run System Restore again.
7. If the previous steps do not resolve the problem, run the following command to repair the damaged portions of your registry:
scanreg /fix

Read other 7 answers
RELEVANCY SCORE 78

My WIN7 Ultimate x64 system restore does appear to be creating system restore points manually or automatically weekly (when it should in Win7).
When I manually create a system restore point it says it was successfully created but when I check there are no system restore points shown (either manual or auto).

Win Updates also says it successfully creates a system restore point before installing updates.

The Task Scheduler service has the SystemRestore weekly auto restore point creation set to run.

sfc /scannow does not report any corruptions.

Microsoft Shadow Copy Provider service is running & set to automatic.
Volume Shadow Copy service is running & set to automatic.

Are there any other services I should check?

Has anyone come across this type of system restore points in Win7 not working problem?

A:WIN7 not creating system restore points manually or automatically

More diagnostic data attached & below.

1. Space Current Usage is 0 bytes with Max Usage set to Gb's
2. Volume Shadow Copy, Task Scheduler and Microsoft Software Shadow Copy Provider Service are Running and set on Automatic
3. Status of System Restore Service - not seen on my services list?? - what is the file name for the System Restore Service?
FYI my other Toshiba laptop (Win7 Ultimate x64 with SP1) has no problems with system restore/creating restore points but that laptop also does not list/show a System Restore Service on Services.msc
4. I have attached settings for Task Scheduler- System Restore - Triggers, Actions & History tabs

Read other 3 answers
RELEVANCY SCORE 77.2

Hello...

A quick question for those who may know the answer. I've been pretty much designated "The Official Family I.T. Guy" I'm sure there are many of you who fit under this title LOL!

My issue is trying to make factory OEM recovery discs for a brand new Samsung Laptop. I've been making factory OEM recovery discs for many name brands pretty much ASAP on Acers, Gateways and Toshiba's. This is all done after the initial OEM setup procedures.

For the life of me...this Samsung does have a recovery option but IT DOES NOT HAVE AN OPTION TO MAKE FACTORY OEM RESTORE DISCS! The reason I prefer this is because when its time replace the hard drive due to failure or upgrading to a bigger one...the OEM restore discs allows me to re-install with extreme ease.

I've contaced Samsung and they told me that the only option was to go to control panel/create a system image.

1. Is the "create a system image" to DVD(s) exactly the same result as using factory OEM restore discs when installing to a brand new hard drive?

2. In a nutshell...somewhere in the future I decide to add a bigger hard drive (brand new). I insert the system image disc 1, reboot the laptop and set it to boot from CD. Will this work just like using factory OEM restore discs?

I've read countless threads and none are giving me the exact answer. I don't understand why Samsung so far is the only company that does not allow you to create factory OEM restore discs like Acer and all the others.

Looking for... Read more

A:Creating a system image on DVDs vs. making factory OEM restore discs

Win7 has built-in backup imaging which works pretty well, but is not as option-complete as other free Imaging programs like Macrium Reflect or Paragon backup 10 which are popular here.

It uses the Install DVD Repair console or System Repair CD to Recover Using An Image, will autodetect the image if placed in the root of external or another HD and kept named exactly the same.

Backup Complete Computer - Create an Image Backup
System Image Recovery
http://www.sevenforums.com/software/...e-macrium.html

Read other 9 answers
RELEVANCY SCORE 76

Can someone provide some detail about the differences in
content between Win7 system repair disc, system restore point and system image?
And perhaps I should add Dell ISO recovery image to the list.  I don't know (yet) if that is different from the Win7 system image option, or if the latter invokes the Dell ISO recovery image program instead.  If it matters, I have a Dell Precision
5510 laptop.
At the very least, is each option a superset of the other, perhaps in the order that I specify above?
Ideally, what are the folder names that each contains, if indeed their content can be described by complete folders?
I am trying to determine which of those options I need to create in order to have
complete recovery capability.
I have read the following support.microsoft.com articles:
https://support.microsoft.com/en-us/help/17423/windows-7-create-system-repair-disc
https://support.microsoft.com/en-us/help/17101/windows-7-system-recovery-options
Those descriptions are indequate for my purposes, in part because of differences in terminology.
For example, the System Recovery Disc option "can help you repair Windows", whereas the System Restore (Point) option "restores your computer's
system files".
In that context, are "Windows" and "system files" synonyms content-wise; or is one a superset of the other; or do they have some non-overlapping content?
I suspect that the System Recovery Disc contains only "Windows"... Read more

Read other answers
RELEVANCY SCORE 73.6

estore system settings and previous versions of file is greyed out on my system, I may have disabled a required service for this, can anyone point me to the right direction for this?

As I'm about to try the X-Fi MB2 mod again as the last time I tried it my system was messed up that it wont even recognize my actual X-Fi card properly. So I'm thinking a system restore can help me with this experiment.

A:System Restore - Restore system settings and previous versions of file

I'd start with system restore. Make sure it's enabled.

System Restore - Enable or Disable

Other things to check are system restore configuration, making sure system protection is turned on, and some general troubleshooting steps for system restore.

System Restore Configuration - Enable or Disable

System Protection - Turn On or Off

System Restore General Troubleshooting to Fix Issues

Read other 1 answers
RELEVANCY SCORE 73.6

Please help if you can. Internet Explorer kept freezing with hourglass, So, I did a system restore to return the computer settings to the last date that it worked properly. I returned it successfully, but internet explorer will not load at all now. It keeps giving me the message that it has to close because of an error and directs me to press 'end now'. I tricked it into opening through my 2Wire gateway and went to microsoft update to try and re-install the missing components. Gave me error message that windows installer was not installed or was disabled because i was in safe mode (which I was not). Are there steps I can take to correct this. Other windows programs are also affected. Such as System Information, Search and Help.

XP Home Edition
Version 2002
Service Pack 2 (it was 3 before restore)
Pentium® 4 CPU
2.60GHz 2.59GHz
768mb of RAM

A:Did System Restore-didn't help. System Restore opens as blank page.

Not so sure it's an infectionLet;s try a quick few scansSome types of malware will disable Malwarebytes Anti-Malware and other security tools. If MBAM will not install, try renaming it first.Right-click on the mbam-setup.exe file file and rename it to mysetup.exe.Double-click on mysetup.exe to start the installation.If that did not work, then try renaming and changing the file extension. click this link if you do not see the file extensionRight-click on the mbam-setup.exe file, rename it to mysetup and change the .exe extension to .scr, .com, .pif, or .bat.Then double-click on mysetup.scr (or whatever extension you renamed it) to begin installation.If after installation, MBAM will not run, open the Malwarebytes' Anti-Malware folder in Program Files.Right-click on mbam.exe, rename it to myscan.exe.Double-click on myscan.exe to launch the program.If that did not work, then try renaming and change the .exe extension in the same way as noted above.Double-click on myscan.scr (or whatever extension you renamed it) to launch the program.If using Windows Vista, refer to How to Change a File Extension in Windows Vista.Be sure to update MBAM through the program's interface (preferable method) or manually download the definition updates and just double-click on mbam-rules.exe to install. Then perform a Quick Scan in normal mode and check all items found for removal. Don't forgot to reboot afterwards. Failure to reboot normally (not into safe mode) will prevent MBAM from removing al... Read more

Read other 3 answers
RELEVANCY SCORE 72.4

Hello people.

I'm new to this so please bear with me.
Okay so I'll give a brief explanation of what's going on.
So a couple of years ago I gave my old computer(HP Pavillion p2 Series /with Windows 7 home) to my younger siblings, because I moved and got a new computer for school. I put a secure Anti-Virus on the computer when I had it and never had a problem with it, but knowing my family they some how got it swarming with Viruses and Spyware...

My first option was to restore it to a date when I still had it, but it would only give me about 5 days ago with checking the "Show more dates" which I have never seen before. Now I know the "basics" of getting a virus off a computer, but if you guys saw this thing..
After that failed I was going to just try and simply delete everything on the computer with a Factory Default Restore. After getting into the System Recovery page, I tried to do the step by step thing it asked. I don't care to much about saving anything on it. (besides Windows of course) And it led to an option with deleting everything and restoring to a image or something? I've never heard of that but then again I'm not experienced with Windows or Computers in general. So I tried that and it was about to start it when an "error 0xe0ef000d" came up, pretty much saying it doesn't have an image to restore to.

With not having any disc's that the computer came with, I am wondering if the option of Restoring to Factory Default is still valid f... Read more

A:Factory Restore not working, error 0xe0ef000d, Image Restore?

That error means it cannot create a directory or one it is looking for does not exist, sounds like it is having problems writing or reading to the hard drive.

Did you run the extended hard drive tests?

Is it a seagate or western digital disk? How old is pc? Was it shipped with vista or win7?

Read other 8 answers
RELEVANCY SCORE 72.4

My Lenovo T60 crashed and was not able to be repaired. I do not know what caused my laptop to crash, but according to the PC Tech, the hard drive was reformatted. To be honest, I am here in the Philippines and did not bring my recovery disks with me & I am not so sure about the technical ability of the PC Tech.

That being said, he installed Windows XP Professional on my laptop and partitioned my hard drive. I have a 250 GB Western Digital HD. Before my laptop crashed, the drive was NOT partitioned. After the installation, I now have two drives, C, with 40 GB and D, with about 200 GB.

I lost a lot of photos and music, and other important documents. I decided to try to recover some of these files and used Recuva. The good news is that a lot of missing documents can be recovered. While listing the files and looking at them, I noticed that I had several System Restore points that I can recover.

My question is, can I use the most recent System Restore point that I recover and use that to reinstall all the missing software? I had MS Office 2007 Professional, MS Visio 2007, MS Project 2007, and other software that I do not have the installation disks with me.

From what I have read, System Restore will reinstall the system (registry, files, and software only) and not the My Documents folder.

If this can work, where do I put the system restore file? If need be, I can delete the new partition and resize the C partition, restore, and then repartition the hard drive afterwards.
... Read more

A:Can I use a recovered System Restore point file to restore missing sw crashed laptop?

Since you already lost everything, try the System restore but first backup everything Recuva found onto a USB key. If your version Windows was not the same what the tech installed, it might not work. Also, he should have first ask you what to do with your files before formatting.
Otherwise you will have to wait till you can re-install everything.
 

Read other 3 answers
RELEVANCY SCORE 72.4

Automatic restore points are no longer being created in System restore on Vista laptop.
Manually created restore points disappear after a short time.
The following are the figures relating to System Restore;
Used Shadow Copy storage space 0 B
Allocated Shadow Copy storage space 0 B
Maximum Shadow Copy storage space 3 GB
Every time I try to increase the allocation the Maximum storage space increases but not
the allocation, and I get a message saying
Successfully resized the Shadow Copy storage association.
Would appreciate any help.
Thanks.

A:Automatic Restore Points No Longer Being Created In System Restore On Vista Laptop

I find this often happens when there are disk read errors. Try doing a chkdsk /r then retry creating a restore point.

Check Disk - chkdsk

Read other 12 answers
RELEVANCY SCORE 72

System info:Windows Vista Home PremiumeMachine T5226Intel Pentium D CPU 3.00GHz4 GB RAM32-bit OSAll of a sudden, I went to set a manual Restore Point and I get the same message:"Could not create the Scheduled Task for the following reason:Cannot create a file when that file already exists.(0x800700B7)"I can change the name and still get the same pop-up, I have nearly visted all forums and tried everything, except pay MS $35 for the fix,which I cannot afford to do and buy medicine, since I am disabled and Part D Medicare for drugs is Bad.Can Anyone who really knows a fix, other than just reinstall and go through all, that, it seems to set points when programs call for it, but not the operator. Any help will be appreciated and rewarded by God, through my prayers. Thanks!

A:Fix for System Restore error (0x800700B7) for Setting Manual Restore Point

Hi,
 
Thanks for posting in Microsoft TechNet Forum.
 
Based on my experience, error code 0x800700B7 indicates that the object cannot be created because an object with the same name already exists. Thus I suspect there is some shadow restore points stored on your computer. I recommend that you perform the following steps.
1. Change another location to save the new created restore point.
2. Resize Maximum Shadow Copy Storage Space by running the following command, there may be caused by limited space.
 
1) Click Start, click All Programs, click Accessories, and then right-click Command Prompt.
2) Click Run as administrator.
3) At the command prompt, type the following command, and then press ENTER:
 
vssadmin list shadowstorage /for=c:
 
4) Note the Maximum Shadow Copy Storage Space value.
5) At the command prompt, type the following command, and then press ENTER:
 
vssadmin resize shadowstorage /for=c: /on=c: /maxsize=300Mb
 
6) Close the Command Prompt window.
 
Hope this helps. Thanks.

Read other 10 answers
RELEVANCY SCORE 72

My questions are on Windows 7 System Restore, Restore Points and Backups; specifically, potentially using a Backup as a Permanent Restore Point.

Here is the situation...

About a month ago, I did a complete Factory Restore on my HP desktop and returned it to it's factory condition. After removing the bloatware and performing all the necessary Windows Updates, the Factory Restore process went off without any issues.

Today, however, I needed to use System Restore due to an issue I was having with multiple monitors that I just couldn't figure out. So, I went into System Restore and found a "Date andTime" of a restore point that was right around the same time I did the Factory Restore. That Restore Point was also the oldest and since I knew it was a known & good restore point, I decided to use it. That restore point "Description" was labeled "System Image Restore Point" and the "Type" was labeled "Backup." (See Image)



I don't recall setting up or doing any backups although, between Windows Backup, Norton Backup and HP's Backup utilities some type of backup obviously happened. FYI, I hate having all those options, as I'd rather use native Windows tools. In any case, today, I used the System Restore using the System Image Restore Point labeled as Backup and, after performing a few minor Windows Updates, everything went off without a hitch and my monitor problem was solved.

However, seeing that Restore point b... Read more

A:Windows 7 - System Restore, Saving a Backup & Permanant Restore Point

ad 1) restore points are in the shadowstorage

ad 2) yes they are overwritten when the shadowstorage is full. You can set the size of the shadowstorage with vssadmin

ad 3) for permanent backups I suggest imaging. There you control the images yourself.

Imaging with free Macrium

Read other 3 answers
RELEVANCY SCORE 72

I have 8gb of space allocated to System Restore, all monitoring my C partition only. This space is always at least 85-90% used according to the System Protection screen. In the past I have had at least 15 restore points to choose from after ticking "show more restore points." But today I went to do a restore and there were only 7 points, despite almost the full 8gb allocation being shown as nearly full, as usual.

This is happening despite relative consistency in the size of my C partition at about 60gb. As always, I have the "restore system settings and previous versions of files" option chosen. And I've checked to ensure none of the drive's other partitions were inadvertently added to monitoring.

I've had Windows 7 for about three months, and saw a similar situation about two months ago. At that point I turned off System Restore and turned it back on, and things returned to normal. But now it's happening again, and this time I don't want to lose the Restore Points I currently have. Besides, the fact that this is happening makes me both curious and uncomfortable.

I've been creating 60% of my restore points manually. Is it possible those, for some reason, use a lot more space than automatically-generated points?

Would appreciate any ideas on what could be going on, and how to address it.

A:Allocated System Restore space holds far fewer restore points now

I suspect that one of your more recent restore points is taking more than the usual amount of space. This can vary widely. This could be due to a newly installed application or some kind of update.

On the few occasions I have used system restore it has always been the most recent restore point. The further back you go the more likely it is that the restore will fail or cause more problems than it solves.

Read other 2 answers
RELEVANCY SCORE 72

Hello,
I turned on my computer and realized that all of my files and programs were missing amongst all restore points. I ran Microsoft Security Essentials and no viruses were found. Is there any way to recover the lost data or is it a lost cause. I have a Toshiba, Windows 7, Intel Pentium. I am praying that I can recover this.
Thanks,
Ryan
 

A:All files/ programs delete and system restore points..Is it possible to restore data?

Check your user's folder, are you using the same logon account ? Sometimes windows logon fails and you get directed to a temporary account + folders and all your files will seem missing, when instead you are not looking at your previous documents folder.
 

Read other 2 answers
RELEVANCY SCORE 72

I wanted to see what was in some of the restore points of 2005,
so I restored back to a previous date and found software,
photos and things that I thought had been completely erased.
Is there a way to completely erase everything that is in system restore?
 

A:Solved: Can System Restore in XP be wiped clean of all previous restore points?

Read other 16 answers
RELEVANCY SCORE 72

My questions are on Windows 7 System Restore, Restore Points and Backups; specifically, potentially using a Backup as a Permanent Restore Point.

Here is the situation...

About a month ago, I did a complete Factory Restore on my HP desktop and returned it to it's factory condition. After removing the bloatware and performing all the necessary Windows Updates, the Factory Restore process went off without any issues.

Today, however, I needed to use System Restore due to an issue I was having with multiple monitors that I just couldn't figure out. So, I went into System Restore and found a "Date andTime" of a restore point that was right around the same time I did the Factory Restore. That Restore Point was also the oldest and since I knew it was a known & good restore point, I decided to use it. That restore point "Description" was labeled "System Image Restore Point" and the "Type" was labeled "Backup." (See Image)



I don't recall setting up or doing any backups although, between Windows Backup, Norton Backup and HP's Backup utilities some type of backup obviously happened. FYI, I hate having all those options, as I'd rather use native Windows tools. In any case, today, I used the System Restore using the System Image Restore Point labeled as Backup and, after performing a few minor Windows Updates, everything went off without a hitch and my monitor problem was solved.

However, seeing that Restore point b... Read more

A:Windows 7 - System Restore, Saving a Backup & Permanant Restore Point

ad 1) restore points are in the shadowstorage

ad 2) yes they are overwritten when the shadowstorage is full. You can set the size of the shadowstorage with vssadmin

ad 3) for permanent backups I suggest imaging. There you control the images yourself.

Imaging with free Macrium

Read other 3 answers
RELEVANCY SCORE 72

I work with a large software suite. The installer for this suite is really just a collection of many stand-alone installers.

If SR is on when I run the installation, it takes a very long time. Additionally, since this is a collection of other installers, SR is somewhat useless to use as a roll-back, since all of my RPs get replaced with intermediate points from the uber-installer.

The company itself suggests turning off SR so that things won't take so long.

Last time I installed this, something went wrong. I was unable to use or uninstall this software, and I was unable to roll-back the system since the SRs were gone.

Currently, my method is to create a full system backup before I run this installer. A pain in the neck.

Is there a way to save my RPs and then turn off SR while I run this? If something goes wrong, I could then apply the saved RP? Mainly, I am concerned about customer systems where I won't be able to create this backup.

Also, while I appreciate any comments or suggestions about the pain-in-the-neck software suite, there is truly nothing I can do about that. They are getting better with each release, but in the meantime I am stuck with it.

Thanks!

A:Can I Pause/Turn off System Restore WITHOUT losing restore points?

If you turn off system restore you will lose all restore points.



As far as I know there is no way of saving them and reinstating them if you switch system restore back on.

Read other 8 answers
RELEVANCY SCORE 72

Hello everyone, not sure why but I get an error every time I open the System Restore. I rarely have to use a restore point as I regularly maintain my computer and check for viruses and malware, but I would like to have the option just in case. When I open System Properties, and click the System Protection tab, I get this error and am unable to create a Restore Point. Attached is a screenshot and a DxDiag.txt. Any insight to this problem would be helpful, perhaps I have some windows feature disabled that I might need enabled, I am not sure. I recently did a complete reformat of my hard drive and a fresh install of Windows, maybe two months ago, and somewhere along the line I must have removed/disabled something I need for System Restore. Even third party maintenance software is unable to create restore points, such as TuneUp Utilities 2014, AVG Internet Security 2014, and UVK. I'm sure the fix for this is simple, I am just unaware of it. Thanks in advance.

A:System Restore Error, Unable to Create Restore Points

You have Tuneup Utilities? Have you looked at this?

System Restore Error 0x81000203 (Below solution at end of this mesage did not work)

Here is some other info as well including the Turbo mode problem

System Restore Error Code: 0x81000203 - Microsoft Community

Read other 3 answers
RELEVANCY SCORE 72

I am having difficulties with this.
1. Does Win 7 limit the quantity of past restore points it shows upon user request?
2. If stored elsewhere where do I find them?
3. Is there a way to set it up to show at least the last 10 restore pointsd created, or is there a smaller limit.
Right now the one and only restore point that is available is the last one. So it is like a revolving door every time a new restore point gets created, the previous one gets dropped and does not show any longer.

Given my limited competence with computer knowledge please post answers in layman terms as in Step 1.. 2 3. type.

I would appreciate help over this.

Thank you kindly

A:System Restore how to set to show every past restore point inc/manual

Hi
I believe that if you go to Backup and Restore (Start button, type Backup in the search bar at the bottom of the start menu), then click Restore button, on the screen that pops up is a blue link that says "Choose a different Date".. This will then allow you to select which backup you would like to recover your data from..

Is that what you are looking for. Apologies If I have mis-understood you.

Read other 7 answers
RELEVANCY SCORE 72

It appears that I have created 2 files that system restore uses in creating restore points.
I found that by deleating on of them, system restore returns to functionalaity.
Unfortunately, I didnt make a record of the file name that gets duplicated (slightly different duplicate).

If someone knows the file created and maintaind by the system restore process, I would appreciate you letting me know what it is so I can delete one of them.
TIA
Neil

A:System Restore- Created Duplicate Restore Point Files

Wait what is your asking? System Restore creates restore points, which are hidden in a folder called "System Volume Information" on the root of your system drive. These restore points are actually folders inside System Volume Information, each folder contains versions of system files and data of changes to your system (such as software and hardware installs). If a problem occurs you can revert to a restore point.

If you are worried you have two restores are almost identical you can clear all the restore points leaving the most recent by going to Start (Orb on Vista)->All Programs->Accessories->System Tools->Disk Cleanup.

Vista - On Vista, dialog will open click "Files from all users on this computer", then on following dialog click "OK".
XP - On XP, click "OK" on the dialog that appears.

Now it will start scanning for files that can be cleaned up. When it's done scanning a new window will appear and on the top of that window there will be some tabs, click the tab labeled "More Options". Look for the section that talks about System Restore and click the Clean Up button. Then Click "OK" on the main window. This clears all the restore points except for the most recent and should resolve your duplicate restore point problem.

I do not recommend that you ever delete files or folders in the System Volume Information, as if you need that file and your system crashes you are pretty much screwed.

-Michael

Read other 2 answers
RELEVANCY SCORE 72

Hi, this looks like the right place but apologies if not, first time posting and all.

I've been trying all day to resolve a networking issue and eventually decided to do a system restore. After doing so, the PC boots but then leaves a black screen with only the mouse pointer visible.

If I go through the Win7 auto-repair feature, the only recovery tool there is Startup Repair, the other options do not appear (System Restore, System Image Recovery, Windows Memory Diagnostic, and Command Prompt).

Here's a few things I tried that haven't worked:
Ctrl+alt+del does nothing.
Hitting shift doesn't show sticky keys pop-up.
PC freezes when attempting to boot in safe mode.
Checked boot device OK in BIOS.
Tried logging in to the black screen.
Removed all connections and hard reset.

Any help would be really appreciated, I'm about to throw the thing out the window. It was working fine except for the networking issue before system restore.

Thanks.

A:Black screen with pointer after System Restore and no Restore Tools

Hellogreenyb118.

Scan the system for possible virus infection.
Windows Defender Offline
Let us know the results.

Read other 1 answers
RELEVANCY SCORE 72

My comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below.

However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th...and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.

Could someone please help me find the restore point I created when my computer was working perfectly?
http://forums.techguy.org/malware-r...s/453201-solved-persistent-spyware-virus.html
 

A:Solved: System Restore: Finding Manual Restore Points

Read other 8 answers
RELEVANCY SCORE 72

i am having lots of problems

-most of the time when i click on links searched by google i get redirected to ads page
-every time i restart my computer my firewall is turned off
-& i cannot restore to any previous date because when i click on restore nothing happens
-i cannot install kaspersky also
-i cannot open any page using IE


here is my hijacklog help me please
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:09:41 PM, on 4/16/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\BitDefender\BitDefender Update Service\livesrv.exe
D:\Program Files\BitDefender\BitDefender 2009\vsserv.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\TGTSoft\StyleXP\StyleXPService.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\PROGRA~1\MI6841~1\MSSQL\binn\sqlservr.exe
C:\WINDOWS\System32\TUProgSt.exe
C:\WINDOWS\Explorer.EXE
D:\Program Files\Autorun Eater\oldmcdonald.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
D:\Program Files\BitDefender\BitDefender 2009\bdagent.exe
C:\WINDOWS\system32\ctfmon.exe
D:\Program Files\Autorun Eater\billy.exe
D:\Program Files\BitDefe... Read more

A:google redirects, firewall off's, system restore doesn't restore

please help me

isnt there any one who could help me
 

Read other 1 answers
RELEVANCY SCORE 72

Hi,

I was messing around with CCleaner and deleted something to do with an old version of McAfee (which isn't even on my computer anymore) from the registry. Yes, it was stupid to mess with the registry I guess because I failed to make the backup and now my computer won't boot. I get the blue screen that says there was an error 0x0000008e, or something like that. I have tried using F8 and choosing the last known good configuration but it doesn't work. Also, I can boot into safe mode and I tried running a system restore but after it finished and I rebooted, it said that I couldn't restore from that point.

I haven't really tried another restore because I am a little afraid to do anything. I don't want to risk losing access in safe mode because I need to be able to back up some of my files if in case I have to do a reformat.

Can anyone advise me on what I should do? Should I try the earlier restore point from a few days ago? Is there a way to find an older copy of my registry somewhere on my computer?

Another problem I am having is, I can boot to safe mode with networking, but my internet will only work for about 10 to 15 mins then I keep getting "Page cannot be displayed" and have to reboot again in order to use the net. That means in order to check for repsonses from here, I have to reboot my PC every 15 mins. Any ideas for a fix for that so that I can troubleshoot the other problem easier?

Any help or ideas would be appreciated, I ... Read more

A:Can I restore registry using System Restore? Blue Screen, PC won't boot.

Read other 8 answers
RELEVANCY SCORE 72

Hi People,

I have system restore enabled for C: but not for the D: (which in my case is a recovery, as it came from the factory). I have not enabled that to be part of the system restore point creation. BUT STILL, every time there is a system restore point (either scheduled or manual) being made for C:, it also seems to create a restore point for D:. How is this possible?? Is there somewhere I could select the disks specifically other than the control panel>system>system protection?? Because here, only C: is checked.. but still restore points are being created for D:. Of course, when I uncheck the box next to D: and apply, it removes the restore point and it even asks me if I want to turn off restore point creation for that disk. I say yes, but then it comes back out of nowhere.



Thanks for any inputs/solutions. Cheers.

A:System Restore Erratic - Restore Points On Disk "not" Selected

*bump*

Anyone people??

Read other 5 answers