Over 1 million tech questions and answers.

Hardware Raid-0\XP-Dynamic Disk Raid-0 Combo?

Q: Hardware Raid-0\XP-Dynamic Disk Raid-0 Combo?

My Eyes er bleedin_n_my heads a spinnin
Been readin Raid-0 threads n pages for weeks now

The more I read the more confusing it gets!

I have two new WD800JBs, two old Fireball Plus AS 40 gig drives,
and a 5th 20 gig Quantum drive...for...."Disk Management Console Tweaks."

A Gigabyte GA7vaxp mainboard with Onboard Promise, and an old FastTrak100 pci card.

1. Is the Promise card better then the onboard version?

2. Can I create a hardware Raid-0 array as my primary partion;
then go into Disk Management Console and create a 2ndary
Dynamic Disk Array with my old Fireballs?
Perhaps I should just keep my old Fireballs for Storage/Backup and buy another WD800jb (only 80 bucks) for a hardware controlled 3 drive array.........or single ata WD800jb with dynamic disk array.......?

Blah...........bla,bla.........blah, blah blah!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Hardware Raid-0\XP-Dynamic Disk Raid-0 Combo?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 98.4

We have a dynamic disk running raid 5 on 2000 Server. C drive is 4 GB for the system volume, and 64GB for the Data volume. We are wanting to repartition for more precise disk quota management but as far as we can tell, there is no product that will convert the dynamic back to basic so we can repartiton. Partion magic, partition manager and Volume Manager do not work on Dynamic disks. Is there any other way than a complete backup and reinstall. Any help or direction would be appreciated.
 

A:partition a dynamic disk running raid 5

Have a read of this Technet article
 

Read other 2 answers
RELEVANCY SCORE 98.4

I had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?


right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?

raid was made with the bios

A:Cant read from my raid 0 dynamic disk, after a windows 8

This one might help: Download ReclaiMe Free RAID Recovery - MajorGeeks

Read other 1 answers
RELEVANCY SCORE 96.4

Hi
Does the final RTM Windows 7 support SOFTWARE RAID-1 (dynamic disk mirroring)? I know it supports fake-raid and hardware raid but I want to use software raid because my disks are of different size. I don't want to try it myself since I would have to convert my disks to dynamic.
Windows Vista didn't support it. XP had it disabled but could be hacked. It was enabled in Windows server 2003 (and probably others).

thanks!

A:Does Win7 support SOFTWARE RAID-1 (dynamic disk mirror)

yes it does. It wasn't long ago that I used it.

Read other 6 answers
RELEVANCY SCORE 91.6

I have been doing research on purchasing 4-bay+ external RAID enclosure for myself. I have done research on software vs. hardware raids for this system, but one question still eludes me; so I am going to ask it here directly.

If I buy software RAID enclosure I will have to use some included software to set-up my raid. So, if I take my enclosure to another PC and plug it in (let's say eSATA) I will not be able to read the data, correct? If I get true hardware raid, the raid set up will be on the build in controller so I will be able to take the enclosure from computer to computer, right?

And since TS has new poll feature lets try it out...
 

A:Hardware vs. software RAID on 4-bay+ RAID enclosure

Regardless of whether you use software or hardware RAID, the enclosure will work whatever you plug it into. The only thing that might not work is connecting an individual disk (used as part of the array) into a device. It all depends on whether the device in question can read the controller used for the RAID set up.

For example, I ran with RAID 1 for two 2TB hard drives in my PC, but I can connect one of them to the same device as a non-RAID disk -- which I successfully did when the RAID broke down for an unexplained reason.

However, it is unlikely to work in a computer, and you should approach it as not working at all in anything but the RAID enclosure. It's also worth pointing out that splitting RAID disks in such a way could corrupt the data. Given that pretty much every decent RAID enclosure worth its salt will include gigabit ethernet at the size you're looking for, availability shouldn't be an issue across your LAN.

Hardware-based RAID arrays are also more reliable in operation, and have the extra benefit of being recoverable in a controller failure by replacing it with the same version as before. Software RAID's are less reliable, slower performing and in the event of a controller failure can be difficult to bring back online.

Basically, when it comes to RAID arrays, don't skimp on cost. The better the quality/controllers the more reliable and better performing it will be.
 

Read other 6 answers
RELEVANCY SCORE 91.6

I have tried to find the way to do this, but without success as I cannot see the wood for the trees. Any help or URL would be welcome.

I have a mature W7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.

A:Converting to Raid 0 Windows 7, NOT Hardware Raid 0

sorry, a mistake, duplication

Read other 2 answers
RELEVANCY SCORE 91.2

Yesterday I woke up to find my computer had bluescreened overnight. scsiport.sys was in the bsod message, and the stop error code was 7a.

---------------

0x0000007A: KERNEL_DATA_INPAGE_ERROR
(Click to consult the online MSDN article.)
A page of kernel data was not found in the pagefile and could not be read into memory. This might be due to incompatible disk or controller drivers, firmware, or hardware.

* Windows NT 4.0 Setup Troubleshooting Guide {KB 126690} NT 4 (Recommendations for the current error message are buried down inside this article, which isnít necessarily limited to NT 4.)
* Connecting a Hard Disk Drive in Slave Only Mode Leads to System Halt During Resume From Standby {KB 330100} Win XP SP1 (Windows installed on a slave drive.)
* BIOS Manufacturers Should Not Clear the IDE Decode Enable Bit in _STM ACPI Method {KB 913379} Win 2000, Win XP, Server 2003, Vista

via: http://aumha.org/a/stop.htm

--------------------

The system has preformed fairly flawlessly up to this, save for a CPU fan error which I may have caused in testing (note to self: never detach a system fan while the computer is running JUST to see if the fan readout/warning system works....) and bluescreens a while back because I had both DVD drives set to cable select.

I rebooted several times and the system did not find a bootable drive - it would just hang at the cursor that displays before the XP splash screen appears. Once, my raid utility reported my RAID 0 failed. I have two Seagate 320G... Read more

A:Solved: RAID boot issues - disappearing disk - RAID question

Read other 8 answers
RELEVANCY SCORE 90.8

Guys,

Is it possible to use a separate hard disk for your OS and programs with data storage on a RAID Array consisting of two (or more) identical hard disks?

Would the system disk need to be the same size as the disks used for the RAID Array?

Thanks!

Fly'n_Blind!
 

Read other answers
RELEVANCY SCORE 90

could I add an internal non-raid hard disk drive to my computer and leave my 3 other hard disk drives in a raid 5 configuration?
ASUS tech support said that I could add optical DVD/CD drives to my SATA connections on my mobo is that correct? The mobo manual does not indicate that I can so I don't know if I should believe the tech guy or not (unless the information is buried deeply and briefly in the manual - I sure can't find it in the manual). My IDE controller on the mobo seems to be failing so I want to replace my IDE dvd and cd drives with SATA optical drives.

DVD Burner: Lite - on LH-20A1H-186
CD Burner: Lite - on LH-52R1P-185
Case: Silverstone SSTemjinTJ06
CPU: Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor
CPU Cooler: ZALMAN 9700 LED 110mm 2 Ball
Fax modem: Encore ENF656-ESW-MOPR
Motherboard: ASUS P5B Deluxe LGA 775 Intel P965 Express ATX Intel
Floppy Drive: NEC Black 1.44MB 3.5" Internal Floppy Drive Model FD1231H-302
Power Supply: OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply 100 - 240 V
RAM: Corsair 2 total 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
Video Card: eGeForce 8800GTX 768MB
Hard Drves (3): Seagate HD 320G|ST 7K 16M SATA2 ST3320620AS
Raid 5 configuration
 

A:Solved: Non Raid Disk Drive in Raid 5 configuration?

Read other 10 answers
RELEVANCY SCORE 88.4

Hello All

I have 2 500Gb SATA Seagate disks in a Raid 0 (stripe) configuration running VISTA. Was running like this for a while and then installed another 250Gb SATA Seagate drive.

My raid controller recognized this disk as a non-raid disk and I could see it was using port 2 on my raid controller (port 0 and 1 were being used by the 500Gb disks). I then preceeded to install XP on the non-raid disk (had to use F6 to install raid software while doing this install). Xp installed fine and I can access the RAID-0 disk while in XP. The problem is I cannot boot into VISTA again.

I tried playing with BOOT.ini but cant get it to recognise the RAID-0 disk as bootable. Please help!
 

Read other answers
RELEVANCY SCORE 88.4

Before I post the rest of my info, here is exactly what happened leading up to this...

My computer froze and I restarted the computer. It ran for a few more minutes and then it froze again.

Then the as it was restarting the cooling fan failed.

I restarted the computer and it tried to load a few more times but would not completely load the OS and would freeze.

Then each other time of restarting it had trouble recognizing my DVD-R/RW drive and HDD.

I checked the BIOS and trying disable then enable the RAID function in the BIOS. Also changing the Boot order to DVD-R/RW first then HDD then switching it back to no luck.

I double checked the connection to the DVD-R/RW drive and HDD.

My computer has a diagnostic function, so at start up, I ran the diagnostics and my processor and 8 GB of ram is running correctly.

When I started searching online I found a site where the exact same chain of events happened to someone else. Here is the site with the thread. (As soon as I post 5 post I will post it...) Try googling "Roasted RAID Controller" - that is the title.

Here is the link...
http://www.pcmech.com/forum/computer...ontroller.html Here is the first link about someone having the same problem as me.

Fortunately I have another cooler fan that works and have plugged it in my comp and it runs now, also if I let the computer sit the drive is recognizable but will not boot. I have an older computer I am using with a usb connector that has a power supply and multiconnec... Read more

A:No disk reserved for RAID use, RAID disabled

I waited for the computer to cool, installed the drive, and it recognized it. I immediately ran the diagnostic tests, the HDD passed the first test but not the Boot test. The computer said to restart the computer and press F8 key repeatedly for repair. I will try it again once the computer cools down, the next time I restarted it did not recognize the drive.
 

Read other 2 answers
RELEVANCY SCORE 88.4

I already looked over the RAID thread about installing and so on, but what about repair or fixing a drive. My old computer lasted for 6 years before I replaced it. So I don't know a whole a lot about RAID and SATA and only recently got a computer with new technology.

Before I post the rest of my info, here is exactly what happened leading up to this...

My computer froze and I restarted the computer. It ran for a few more minutes and then it froze again.

Then as it was restarting the cooling fan failed.

I restarted the computer and it tried to load a few more times but would not completely load the OS and would freeze.

Then each other time of restarting it had trouble recognizing my DVD-R/RW drive and HDD.

I checked the BIOS and trying disable then enable the RAID function in the BIOS. Tried it with IDE as well I don't know what the other one is, something like ACHI or AGHI. Also changing the Boot order to DVD-R/RW first then HDD then switching it back to no luck.

I double checked the connection to the DVD-R/RW drive and HDD.

My computer has a diagnostic function, so at start up, I ran the diagnostics and my processor and 8 GB of ram is running correctly.

When I started searching online I found a site where the exact same chain of events happened to someone else. Here is the site with the thread. Computer froze, fan quite working, "...RAID disabled"

Here is the link...
http://www.pcmech.com/forum/computer...ontroller.html Here is the first link ab... Read more

A:No disk reserved for RAID use, RAID disabled.

Read other 16 answers
RELEVANCY SCORE 88.4

I currently have 4 250gb HDD's and i am going to RAID them through RAID 0, although i am not sure whether i should use a RAID controller, or RAID them using the software in BIOS. I have found a RAID controller for $38 at my local tech store, it supports up to 4 SATA 2 (3gb/s) ports, which is what i need. Although, i am hesitant as to which would be faster, this RAID controller, or setting up RAID 0 through BIOS?

Thank you.
 

A:Hardware RAID vs Software RAID?

A $38 RAID card is likely no better, possibly even worse than the RAID offered by the motherboard, which would be considered firmware RAID, which at $38 the card is probably the same. A true high performance hardware RAID controller will cost hundreds of dollars.

But without exact model numbers it's hard to give a firm answer.
 

Read other 1 answers
RELEVANCY SCORE 88.4

Which is better: Software RAID 1 using Windows or Hardware RAID 1 using a RAID controller? Do either of them allow you to move the drive to another computer?

A:Hardware RAID vs Software RAID

https://www.adaptec.com/nr/rdonlyres..._hwraid_10.pdf

http://augmentedtrader.wordpress.com...0-things-raid/

I`m sure you`ve already Googled it, I`m just trying to pull up more info.

Read other 9 answers
RELEVANCY SCORE 88.4

I need some advice on a hardware/software issue. The basics: I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:\. (I now know from Western Digital Customer Service that I shouldn’t have done that, but let’s move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again ‘good’. Then on July 4th (wouldn’t you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (please don’t ask) and did a similar swap out. That’s when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. That’s when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well that’s not what ASUS says in their advertising, but live and learn. All that’s prologue, because my real question is whether it’s possible to break the hardware-based RAID 1 array and set up a W... Read more

A:Hardware RAID 1 to Windows 7 RAID 1

You might be able to break it if it is truly RAID1, but I would think you'd need to run a repair to get it booting again. But, we can back up a step. Why bother with RAID at all? It's wasted on a single user desktop, especially for mirroring. It isn't a good backup method, so why use it?

If it was my system, I'd run one drive internally, cut into C and D partitions, then stick the other drive in an external housing to use as a backup drive. No need to overcomplicate a system setup, and no need to mess with dynamic drives.

Read other 1 answers
RELEVANCY SCORE 87.2

First time posting :blush:,

Situation: I have two hard drives : main drive: Seagate 500GB w/ windows xp and second drive: WD 1TB blank.

Without backing up the main drive (ops...), i went ahead and enabled RAID 0 on both drives and created a RAID volume (128KB strip / Size: 1TB (931.5GB)).
NOTE: the RAID volume size is only showing the exact space of the 1TB, excluding the 500GB drive.
After realizing that I needed to create a backup image of my main drive to use RAID with an existing drive, I'm left with the "Operating System Not Found" message.

Question: If I Delete RAID Volume (which is based on the size from the blank 1TB drive), will both drives become available as non-RAID disks and keep the original data on the 500GB main drive and be able to run windows again?

I'm using software RAID through Intel Matrix Storage Manager option ROM v5.6.2

I understood that "Resetting the drives to Non-Raid" will cause all data on the disk to be lost, so this isn't the approach that I'll be taking til I find a solution to backup my data.
However, from reading the "Delete RAID Volume" option, it listed Deleting a volume will destroy the volume data on the drive(s) and cause any member disks to become available as non-RAID disks, so knowing that the RAID Volume is blank, then maybe trying this will be the answer.

When using the Microsoft Recovery Console in (RAID mode attached w/ both drives) logically there isn't ... Read more

A:RAID issue - deleting RAID volume to restore non-RAID disks

sadly, there's no way to do what you want without an existing backup.

Look at it this way;
A disk has a container ~ the partition.
The partition as a structure ~ the filesystem (eg NTFS, FAT32, RAID).
We put our data into the structure.

When we create backups, we are getting only the data itself (unless you use an image program like Ghost or Acronis where you get all three).

Deleting the RAID will give back the two independent HDs, but also breaks the structure so that the data becomes in accessible.
 

Read other 3 answers
RELEVANCY SCORE 82.8

I'm hoping someone here can help. I'm very new to Raid, so you'll have to excuse my ignorance here. I'm using an HP pavilion p6210Y with 2x 2TB, WD Caviar Green's trying to set up a raid 1 array. I've reached the Nvidia raid array setup utility, and it appears I have successfully loaded the raid drivers.
After doing this, I inserted my Windows 7 x64 home premium install disc, and it sat on "Detecting storage devices...". After a few minutes of this, I was presented with an Error stating "No disks reserved for raid use, raid disabled." Then shortly after, switches to a message stating: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."
I'm now unable to reach the Nvidia Raid setup, and unable to load the windows disc.

I'm certain the CD drive is good, as it works fine in another computer.
BIOS:
Mediashield ROM BIOS 10.0.0.28 RPT
Copyright (C) 2009 NVIDIA Corp.
If someone would know what to do from here, please share your knowledge.
Thanks,
Chris
 

A:no disks reserved for raid use Raid disabled - Raid 1

Do you have Windows on the drive now? How did you load the drivers? Drivers won't function without an operating system, so I'm a little confused about exactly what you did.

How did you run the setup utility? Does your machine support hardware RAID or are you using software RAID? Are there RAID settings in BIOS?
 

Read other 2 answers
RELEVANCY SCORE 81.2

Hi,
I have win XP SP2 installed on an Asus A7N8X delux mobo machine (with a si 3112 sata raid controller).
I have an 120 Gb HD and have now just bought another one.

I have been reading about using the bios tool to create a striped set (raid-0). But all threads I have seen seem to suggest both drives then need reformatting.
I am hoping to avoid this, so I found some info on dynamic drives which allow you to set striped mode as well (from within windows xp).
There are 2 questions I have then, that hopefully someone can answer:
1. Will converting to dynamic disk and selecting striping in Windows XP allow me to avoid re-formatting and hence having to create huge backups?
2. Will this be the same as if I had created the raid set with the bios tool (performance and as seen from the bios) ?

Hope someone can help.

Mons

 

A:Dynamic Disks, Striping and Raid-0

1) Yes.

2) No. As far as I know, striping dynamic disks doesn't take advantage of hardware RAID controllers, at least by default, so performance will be lower. To BIOS everything seems the same as with basic disks.
 

Read other 4 answers
RELEVANCY SCORE 80.4

Hi all.
Have this annoying problem, and have tried for so long time now, that I am close to give up. Hope that somebody can help me....

Bought a clean pc with following specs:
AMD Sempron 1,8 Ghz
MSI K8 MM3 (VIA K8M800+VT8237R)
Hard drive is Samsung SP2504c SCSI

When trying to install WIN XP Pro, I hit F6 and put in my diskette With Via Sata Raid Driver. Choose "Via Raid Controller for Xp in menu and hit enter. Format system to NTFS and hit enter again. Then he ask me to put in "Via raid combo diskette". Try to put in the same and only diskette I received with my pc and hit enter but nothing happens.....have now tried this a million times....Have also tried to download the drivers from Vias page, but same result. Still asking me for combo diskette.

If somebody know how to solve this and would be so kind to put a step by step solution for me I will be extremely grateful.

Best regards
 

A:Via Raid combo diskette.....

As silly as it sounds... sometimes you need to make your own bootable floppy with the Sata Raid Drivers (that are well hidden on your chipset cd..) on it. Why VIA couldn't give you a floppy with them on there is beyond me.

I will assume that your chipset cd is similar to mine; so you want to explore the cd and go into the Bootdrv folder you see. Make sure a floppy disk is inserted in it's drive and execute the sata file that is shown in the BootDrv folder. A DOS prompt will show up and it will ask you if you want to extract the files onto your floppy. Hit y to extarct them all. The drivers, 5 or 6 (going on memory) files should now be on your floppy. Now Windows should recognise that there actually is a hard drive there.

Your chipset cd may be different to mine, if so just explore the whole thing until you find the sata executable.

Hope this helps and let me know how it goes.
 

Read other 2 answers
RELEVANCY SCORE 80.4

I have seen this question being asked a few times already. I just bought 2xSamsung Spinpoint F3 1TB drives and I created a dynamic striped partition with MBR in comuter management. If I try to install win 7, after dvd boot-up, will I be able to select the partition and install windows on it ? I know all about the advantages and disadvantages of using software raid 0. But, my question is simple. Can you just install an O/S on that type of partition (will it be detectable?) or do I have to buy a "fake raid" controller or boot some type of application first to make it detectable everytime I boot up my computer ? Thank you

A:Can I install win 7 on a Software Raid 0 MBR dynamic partition

I personally would stay away from RAID & dynamic partition, as it seems to more problems than it is worth.

Read other 2 answers
RELEVANCY SCORE 80.4

I have Home Windows 7 premium which means I cannot Encrypt, create dynamic disks, or mirror (RAID 1) my hard drives, so if this is true and I want to use any of these I need to go back to my Vista Ultimate?

A:Encrypt, dynamic disks, & mirror (RAID 1)

You don't HAVE to go back to Vista Ultimate, you can get an upgrade to Professional as an option.

Read other 6 answers
RELEVANCY SCORE 79.6

Hello all.

I have been researching this to no avail.

Here is the TL DR;

Old computer died which had two 400GB sata drives that houses a lot of family pictures and MP3s. The drives were dynamic and a 745 GB volume spanned across the drives. I now know these drives are also RAID-0, but I wanted to see if I could see any data on them and I had a USB sata dock. Learned the hard lesson that a dynamic disk wont be visible via USB no matter what (at the time I didnt know it was also a RAID-0) . I put the drive (which just happened to be the first drive) in my dock and somehow the drive got corrupted and became a basic disk. Pop up came asking if I wanted to format which of course I didn't. Odd thing is that the partition is intact (745GB) which causes the issue of not allowing me to convert it back to dynamic. It would seem if somehow I could just get it back to dynamic everything would work again or would be a heck of a lot easier to repair.

The issue is I cannot convert directly back to dynamic because it appears I don't have enough "free space" due to the partition reporting a 745GB volume which is correct.

I have tried multiple pieces of software mostly from Acronis, EASEUS, and Runtime (Disk Director, GetDataBack NTFS, Raid Recovery for Windows, and Data Recovery Wizard). Problem is these products don't fully solve the problem and I cannot reliably get the data off. The one product Runtime does have is raid reconstructor - but I am not ready to spend ... Read more

Read other answers
RELEVANCY SCORE 79.6

Please help!
I have Win 7 installed on an ssd drive and data on a 2 disc Raid 0 dynamic disk setup using Win 7 (stupid I now understand)
After a few crashes I decided to clean the dust from my PC, on reboot the OS started fine but no data. I discovered one of the raid discs was not recognised in the BIOS. I checked the cables, still no drive, I moved cables and the drive came back but this time no OS, system was hanging after CMOS back up success. I stripped the system down to basics (only OS drive, no Graphics card, checked RAM) and still couldn't get the OS back. I tried system repair using the DVD still no joy. I used a different HDD and loaded a fresh copy of Win 7 but it can't read the Raid drives. They are both dynamic and foriegn in disk management. I can also read all the data from the original ssd drive and that checks out ok with no errors but still won't boot. to top it all my back up drive has just died.
Is there any way to get the fresh OS to read the Raid drives? Should they be automatically readable?
Any Ideas on getting the original OS on the SSD bootable again? I'm wary of doing a fixboot or fix mbr as I don't know if this would affect the Raid recognition.
Panic over I used the Import foriegn discs from disc manager

Read other answers
RELEVANCY SCORE 75.2

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 2
RAM: 1022 Mb
Graphics Card:
Hard Drives: C: Total - 250003 MB, Free - 225853 MB; D: Total - 226925 MB, Free - 226852 MB;
Motherboard: Dell Inc. , 0U7077, , ..CN481114B601BJ.
Antivirus: Norton Internet Security, Updated: Yes, On-Demand Scanner: Enabled
Originally every 2 - 3 mos., now every 2 - 3 wks. during windows startup I get a blue screen "A problem has been detected and windows has been shut down to prevent damage to your computer"

I disconnect power, wait a couple of minutes and restart. It restarts normally, then I get "The system has recovered from a serious error - please tell Microsoft". I send error report.

Windows error reporting responds "Download and install driver for RAID controller from Intel website".

I follow the link and download iata_env.exe but when I try to run it I get "This computer does not meet the minimum requirements for installing the software". This doesn't surprise me since I do not have a RAID controller on this system.

My question is - how do I stop Windows from looking for RAID drivers to load at startup? There is no RAID controller listed in Device Manager so I can't disable it there.

This started some months after I upgraded some Intel drivers (about 2 yrs ago) but... Read more

A:BSOD when windows tries to load RAID driver on system with no RAID<input type=

Read other 6 answers
RELEVANCY SCORE 75.2

Hi there
Yesterday my computer was shut down when I returned home.  I may have lost power but I am connected to a UPS that should have kept me safe from any surges.  Turning the computer on, my RAID5 drive (drive letter M) is gone and a mysterious new drive
has appeared, labeled as drive E, also showing as a RAW drive. In disk management, I can see that drive M is its normal size, 11177.94GB.  I am using 4x4TB drives.  Intel Rapid Storage Technologhe shows all four
drives as healthy and functional.  Drive E shows in Disk Management the same as Drive M, and I have no idea how it ended up there and what I should do with it.  My C drive shows up and works normally, where I have my OS and programs installed.
Not sure where to start, but hoping it is just an issue with the MBR?  

Read other answers
RELEVANCY SCORE 75.2

I've got two identical WD VelociRaptor 1TB Drives.
One has been setup as a storage drive for a long time, and I'm finally getting around to setting the other one up as a RAID 1 mirror.
Both were bought at exactly the same time.
I see this website, showing how to perform the feat on a PowerEdge Server: [https://markmcb.com/2015/07/21/reconfigure-dell-perc-h310-raid-0-to-raid-1/]
But pressing F10 on my system does nothing at all.
Is something like this possible on a Precision T5600? Or is this just a server capability?

Read other answers
RELEVANCY SCORE 75.2

I ordered a 3620 with 2 hard drives configured for RAID 0. It has already shipped. I realize now that I made a mistake and should have ordered the RAID 1 configuration. I realize this will reduce my total drive capacity.
Also, I'm planning on adding a 3rd HDD that I do not wanted to be included in the RAID. Any help on switching RAID levels and adding the 3rd drive would be appreciated. I'm expecting the machine to arrive tomorrow.
Thanks.

Read other answers
RELEVANCY SCORE 75.2

I've got two identical WD VelociRaptor 1TB Drives.
One has been setup as a storage drive for a long time, and I'm finally getting around to setting the other one up as a RAID 1 mirror.
Both were bought at exactly the same time.
I see this website, showing how to perform the feat on a PowerEdge Server: [https://markmcb.com/2015/07/21/reconfigure-dell-perc-h310-raid-0-to-raid-1/]But pressing F10 on my system does nothing at all.
Is something like this possible on a Precision T5600? Or is this just a server capability?

A:Precision T5600 w/ PERC H310 - Adding a drive and going from RAID 0 to RAID 1

F10 is not for Desktops.How to set up Dell PowerEdge RAID Controller H310 cards on a Precision workstationDell PowerEdge RAID Controller (PERC) storage controller cards H310, H710, H710P, or H810 on Dell Precision workstations T1600, T3600, T5600, or T7600. For more specific information on the controller card or workstation, refer to that product’s user guide.To install the PERC    Turn off your workstation and all attached peripheral devices.    Disconnect your workstation from the electrical outlet and remove the workstation cover.    Insert the PERC into the SLOT1 (preferred) or SLOT4 expansion slots.        Earlier T7600 workstation may need to use SLOT4 because the HDD data cable is not long enough to reach to SLOT1.    Connect the hard disk drive (HDD) data cable to the H310 connector labeled A SAS.    Connect the AUX_LED cable to the H310 connector labeled SAS_ACT_LED_Conn.    Install HDDs in the desired order, starting with 0 as the first HDD and note the HDD numbers.        For T7600, HDD numbers 0-3 are available with a single HDD data cable with upgrade options for 4-7.        For T5600 and T3600, HDD numbers 0-1 are available with a single HDD data cable with upgrade options for 2-3.    Replace your workstation cover.    Reconnect your w... Read more

Read other 1 answers
RELEVANCY SCORE 75.2

I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to use the drive letter R: because D: was not available in the list option. When I start some programs, the program is looking for the data on D: drive. Is there any way to change the letter of my raid storage from R: to D:?

Thanks
Jeff

A:RAID 5 switched from single storage to raid 5, lost drive letter

It's possible the cd-rom/dvd drive assigned itself as d: before the new raid was created.
This should be solvable using the windows disk management tool if that's the case.

Read other 2 answers
RELEVANCY SCORE 74.4

Does anyone know anything about the Adaptec 2100s raid controller?
the setup is 2x20 gig mirrored drives for O/S.
3x40 gig raid 5 drives (hot swap)

does the card automatically rebuild the raid 5 if a drive dies and is replaced, or do I have to rebuild it with the configuration tool during post?
I don't use the disk management software included!

running 2000 advanced server on a simply computers systemax server.
please help
 

A:Hardware RAID

I think it will automatically repair it's self, but see: http://www.adaptec.com/worldwide/pr...ts/ASR-2100S&type=Product&productid=ASR-2100S
 

Read other 1 answers
RELEVANCY SCORE 74

The computer has been fine for around 2 years, never an issue. About an hour ago I reboot the machine and instead of having my RAID 1 as my C drive, I now have two identical drives, the C drive and the H drive.

How do I get them back to where they belong?

In the BIOS SATA is still set to RAID, and I admit that I didn't do the raid config. I am assuming it was RAID 1 because both drives are still working, just working separately instead of as one.

Any suggestions?

Windows 7 Pro 64bit

Read other answers
RELEVANCY SCORE 74

I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes black and reboots. The windows recovery screen appears and asks if I want to run the startup repair or start windows normally. I selected the startup repair. Windows goes through it's paces and tries to repair but fails. It says "NoRootCause" and the problem is likely caused by a recent system change or upgrade. I have the feeling windows needs some kind of RAID drivers or something. The onboard RAID is a P5W DH Deluxe motherboard. Any ideas? Is this even possible to do?

A:Windows 7 System Image - Restore Non-RAID to RAID 0+1

MetalliMyers, welcome to the Seven Forums.

Assuming you built the RAID while still using the single disk this is what worked for me when I was experimenting with RAID,

1. Install drives and configure the array

2. Boot to Windows and install the necessary RAID driver

3. Make a full backup after the drivers are installed

4. Used imaging program (at the time I used Acronis True Home, but should work with any imaging app) to put the backup on the array

5. Disconnected the single drive after imaging just to remove it from causing any problems

6. Started up and it booted to Windows

No promises but it should work. Failing that you are looking at a fresh install of Windows.

Read other 8 answers
RELEVANCY SCORE 74

I have a computer running XP which was built with a pair of 80 GB hard drives which have met their limit in terms of free space so the user is wanting to upgrade. These drives appear to be running in some kind of RAID setup via the motherboards built in RAID feature (not a PCI card running this setup). This is the first time I've encountered a RAID setup in a home-based PC.

One other minor problem I have is this motherboard (an Asus ABN-VM) only has two SATA ports, which are both used, so I'm going to have to clone to an external drive as an image file and then connect the new single 500 GB drive and clone back from that image to the new drive. However, come to think of it, I have an adapter that would allow me to connect the new drive to the PC via USB so... scratch that concern I guess.

I decided to take the plunge and see what Clonezilla would do with the external USB drive I have and the two 80 GB drives in the PC. When the main menu appeared I told it that I wanted to work in device_to_image mode and then told it to mount all drives. It then asked me to select the drive I wanted to use as the source but it presented both drives as individual drives, not a single mirror as I was expecting the motherboard to present it as. So... don't know what to do from here.

Perhaps there's another cloning utility out there I could run from within Windows or could boot from a disc that would recognize this array and clone it to a single drive properly. Any suggest... Read more

A:Need to clone a RAID mirror (two drives) to a non-RAID, single HD

If the drives are mirrored then imaging one drive should be all you need. If the drives are striped then the two drives are being combined together to make ~160GB drive.

I guess to determine this, what is the capacity of the main 'logical' drive? 80 or 160'ish?
 

Read other 1 answers
RELEVANCY SCORE 74

hello everyone,

I am thinking to renew the whole data in current raid1 array md0. My environment is:

raiddev /dev/md0
raid-level 1
persistent-superblock 0
chunk-size 16
nr-raid-disks 2
nr-spare-disks 0
device /dev/hdb1
raid-disk 0
device /dev/hdd1
raid-disk 1

this '/dev/md0' is /home, so I'm not booting from this disk and the other file systems including root and /boot are on /dev/hda.

What I want to do is to renew the whole data in /home.

Is there any way to do this by switching /dev/hdd1 with all new data copied, then sync this new data to the other raid disk (/dev/hdb1) : FROM /dev/hdd1 (the disk just added with new data) TO /dev/hdb1 (currently active raid disk)??

Usually, after switching the HDD to new one, data in /dev/hdb1 is to be copied to /dev/hdd1 for recovery. But in my case, I want to do the opposite.

I would be so appreciated by all your helps,
Thank you,
 

A:RAID question: how can I renew the data in raid array?

I'm not sure what you want to do.. You want to copy something to the /dev/hdd disk (from another computer maybe) and then copy the data from /dev/hdd to the RAID array?

Since you are using RAID1 then it should be fairly simple.
You just simulate disk failure by removing /dev/hdd. You could do this by making the hdd drive hdc instead (jumper it to be the secondary master). Now you mount the "hdc" drive (that really was you hdd) and copy whatever you want to /dev/md0.
Since it's a RAID1 array then all the data that goes to md0 is written to hdb and when the /dev/hdd comes back the RAID is syned onto both disks again.

I'm not sure if that makes any sense to you. Can't be less obscure than your post though
 

Read other 7 answers
RELEVANCY SCORE 74

I keep trying to migrate it using minitool partition wizard but whenever the action has been completed it won't boot from the SSDs windows recovery comes up. Any suggestions?
 

Read other answers
RELEVANCY SCORE 74

I have a Dell Precision 390 with a single disk on SATA0.
Could I add a pair of Raid 0 (stripped) drives on SATA2 and SATA3?
Why?
Well I have a pair of disks from a dead pc which I'd like to recover data from. They are configured as a Raid 0 pair.
I doubt this configuration would work, but I just thought I'd ask!

A:Dell Precision 390 desktop mixed raid and non raid?

I posted this nearly 4 years ago and 7000 people looked at it. No one had an answer...

Read other 1 answers
RELEVANCY SCORE 74

Hi all,
My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing and BSODs that came once in a while.

Before deleting the RAID array, I went and used the Seagate (my HDDs) .iso file and used their diagnostic tool to check the drives. I did a long test of one of the HDD (Device 1) and it passed. I deduced that this was at least a good drive. I didn't do a long test for the other HDD (Device 0). But with both, after a short test, both passed.

I then went into the RAID manager (DOS-looking screen before Windows starts) and then 'reverted' Device 1 to non-raid. Then decided to choose 'delete RAID setup' for the Device 0. All good so far. I rebooted and Windows actually started fine. This is where I'm at right now as I type this. No freezing so far!!!

What I wanted to know is how do I find out which HDD Windows is booting off from? Is there a command line I can use in command prompt window in DOS mode to find out this info? It'd be great to know that I'm not on Device 0 since I haven't done a Seagate diagnostic long test on that one.

Also, I'd ideally want to have the second (Device 0) HDD formatted so that I can leave it in my tower and use it as an external HDD with Syncback. This is the closest thing I can have to RAID and I'm perfectly happy ... Read more

A:RAID - deleted RAID array, Windows 7 ok but I have questions

You can do into Disk Management and it will tell you which drive is used for booting. It will say it is active.

I am confused as to one part. You say you want to leave the second drive in your computer, but use it as an external. You can use one as your main drive, and use the other for backup...however a good backup process involves a drive that isn't readily available all the time. That being said, something like SyncToy from Microsoft will allow you to choose folders and on a schedule or manually, copy them to the second drive. I use this on my wife's laptop to keep her photos backed up to our server.

RAID has no place on a desktop system, so you are better off without it. But to get started, just go into Disk Management to see how your drives are configured now. Post a screenshot if need be.

Read other 6 answers
RELEVANCY SCORE 74

Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. did i do something wrong? using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..

A:Win 7 raid 0 setup / missing raid controller driver

Try loading the JMicron drivers from the motherboard manufacturer. RST is for Intel chipsets.

Read other 1 answers
RELEVANCY SCORE 74

i have an MSI 915P/G motherboard with two maxtor 160GB HDD's as a RAID 1 array. my mobo has an onboard RAID controller. the system worked. wanted to reinstall xp, so i performed [email protected] killdisk on my c: partition. now windows doesn't see my RAID array. i installed an additional seagate SATA HD and was able to install XP on it. device manager displays a yellow question mark by my RAID controller, but if i install drivers for the RAID my computer fails to boot and goes to windows 'safe mode or last known good OS' screen. safe mode just keeps rebooting, last known good takes me back to RAID controller driver problems.
any ideas of how to get my data off the d: partition of my maxtor drives would be great.

Read other answers
RELEVANCY SCORE 74

My mum recently gave her computer to me since she got a netbook and thought that she wasn't getting enough use out of such a computer. An error message kept showing up when I powered on the computer, apparently this had been showing up for some time.
It was on the Intel Matrix Storage Manager before Windows started, one of the physical disks were listed in red. However, the computer was still in full working order, but I wanted to get rid of the screen that kept coming up, so in an attempt to fix it, I went into the Matrix Storage Manager's configuration utility and not knowing what it would do, reset the disk listed in red to Non-Raid.

Now ever since I've done that, I've seen nothing except the BIOS, all that comes up after the Matrix Storage Utility now is a device listing and it says at the bottom 'DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER'. I inserted an OS disk and nothing would come up. Since then, the closest thing I've had to progress was by going into the BIOS settings and changing the hard disks SATA mode to 'IDE'.
After setting it to that, the Matrix Storage Utility doesn't show up, which I thought was a good sign at first, but then afterwards the same final screen shows up, but the message at the bottom had changed.

'Boot from CD:'
(Then after a couple of seconds loading it comes up with)
Missing Operating System

Since I've had this problem, I've tried 3 discs to try and save my o... Read more

A:Solved: Reset my Raid 0 Array to Non-Raid and now nothing's working, help please :(

Read other 15 answers
RELEVANCY SCORE 74

Hi..thanks for the help...I have XP installed on a non raid drive C: I am trying to install XP on a RAID0 set up.....I have tried to install the raid set up but the puter reboots after a BSOD right when it tries to get to my desktop...is it because of some conflict with another OS on the non raid drive? I tried to disconnect the non raid drive before booting up the raid XP but still..no dice...any ideas?
Thanks
FoxK
 

Read other answers
RELEVANCY SCORE 73.6

I just purchased an Thinkpad Extreme 2nd Gen. 20QVS0FP00When I was talking to a friend who has more tech knowledge than I do, he asked if I installed  another 1 Tetra bite SSD would it be possible to have a raid 1  set up. I said I didn't know. He said to ask if a Hardware Raid 1 is possible.If yes any suggestions would be appreciated.Also if he installs it would that void the extended  warrenty?Thank you for your help

Read other answers
RELEVANCY SCORE 73.6

i read that with current technology, software RAID will provide better performance (uses faster CPUs). is it true? what other factors will you consider and which shld i choose

also if i use software RAID whats a good software? i think i will either use RAID1 or 5.

A:RAID (Software or Hardware)

For a home computer, then software RAID is probably the best to go for. Hardware RAID starts to get expensive if you want the best speeds.

RAID5 is probably better to go for, as in your other thread, you were wanting a performance increase. RAID1 is just mirroring, so you write the file to one disk, then write the same file to the second disk. Read speeds are the same as what they would be with just a single drive, and write speeds are slower.

RAID5 is striping with parity, as I explained in your other thread. A file is striped across two drives, and then to the third drive. Read speeds are increased like with RAID0, as you're only reading half the file from each disk, but write files are slower too because of the parity checking.

Read other 3 answers
RELEVANCY SCORE 73.6

Hi there

Looking at nice fast SAS RAID stuff for the VM --any idea if it's possible to pass thru the RAID controller to the VM without Windows seeing it or the HDD's it will be attached to -- I want mega fast I/O so I want to use RAID 0 -- not worried about failure as I have enough backup.

I want the attached HDD's to the RAID controller to go straight to the VM as "Raw" HDD's.
Possible from Windows Host or not.

No problem with current setup although Windows still shows the 2 HDD's (Non SAS) that I've attached to the VM as "Non initialized". (HDD's formatted XFS). It would be nice if Windows didn't even SEE these drives so ALL the I/O was totally done by the VM..

What I'd also like is a really stripped down version of Windows so most of the resources can go to the VM which I'm using as a Server. Was looking at Windows 2016 server - but it's hopelessly expensive for home users - although you can get a Trial.

Cheers
jimbo

A:HYPER-V with Hardware SAS RAID only on VM - possible ?

Might be tricky. I mean, there's of course an option to use physical disks on Hyper-V vm, but to do that the disks must be set offline on host first. Using host hardware RAID controller on a vm is if not completely impossible but at least very tricky and difficult.

There's very little information available about using RAID on Hyper-V virtual machines, the information available suggests you should use either software RAID or Storage Pools / SAN.

A bit older TechNet article still worth to read: Planning for Disks and Storage

This is also a good series of articles: Storage planning for Hyper-V Hosts (Part 1) :: Windows Server 2012 :: Articles Tutorials :: WindowsNetworking.com

Kari

Read other 1 answers
RELEVANCY SCORE 73.6

Hi there,
I hope you can help me and i also hope that i explain myself properly.
I have just installed a RAID controoler card into my PC and am about to install XP Pro.
The CD that came with the card contains 184meg of data. When the option to press F6 to install third party RAID drivers comes up, i press it and then press S.
I am then asked to insert the disk that contains the drivers into drive A, my problem is that 184meg doesnt fit onto a floppy. Can you tell me a way around this issue please?
Thanks for your time.
Ad
 

A:RAID hardware headache

Read other 6 answers
RELEVANCY SCORE 73.6

Ok, here's the deal. This morning I woke up to see that XP had bluescreened. I had no choice but to kill the power. I then booted to see that my Striped RAID array was offline. This has happened before (the offline RAID, not the prior bluescreen though), and the solution was always very simple. If my RAID went offline, which it has a couple times in the past year, I could simply delete the array, and re-create it again exactly as it was. It would then show up as functional and all would be well.

So, I went to do exactly this. Everything seemed to be going right, but then i got the "insert boot disk" error on boot. When I rebooted again, I looked closer at my RAID configuration as it flashes on the screen at boot. It showed that my total space was 0MB. I went back into my RAID controller setup (ctrl+F) and again tried to delete the array, but no matter if I make the array automatically, or manually, it still detects the total size of the array as 0MB. The odd thing is, it detects the proper drives seperately (ie. both show up as the 120 gig drives that they are with 120 gig capacity in the RAID configuration), but once they are put into an array, the array's capacity is automatically 0MB and there is no way to change this.

Only two things come to mind: Either my RAID controller is messed up, or POSSIBLY the RAID controller is trying to read the MBR (I don't know if it would do this and i wouldn't think so), which may have become corrupted with ... Read more

A:Problem with hardware RAID :(

Read other 10 answers