Over 1 million tech questions and answers.

Win7 + X-Fi: Can't decode DD/DTS (Isn't this built into

Q: Win7 + X-Fi: Can't decode DD/DTS (Isn't this built into

I'm getting a little frustrated because the latest Creative X-Fi drivers say this:






Quote:
Added Features or Enhancements:
For systems using Windows 7 or Windows Vista

* What U Hear feature is enabled.

To find out the Product ID of your audio device and if it supports the following feature in Windows XP, click here.

* Dolby? Digital and DTS? decode re-established for sound cards that included decoding in their Windows XP drivers (Not applicable for products that included a 3rd party software DVD player license in the package).


I've checked the compatibility, and my Xtreme Music supports this DD/DTS decoding.

However, in the audio console I do not have a decoder tab and my SPDIF I/O tab has the SPDIF drop-down grayed out and set to "Default".

How do I get my X-Fi Xtreme Music to hardware decode DD/DTS? (under Windows 7)

Please help!

RELEVANCY SCORE 200
Preferred Solution: Win7 + X-Fi: Can't decode DD/DTS (Isn't this built into

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Win7 + X-Fi: Can't decode DD/DTS (Isn't this built into

Quote: Originally Posted by sofakng


I'm getting a little frustrated because the latest Creative X-Fi drivers say this:






Quote:
Added Features or Enhancements:
For systems using Windows 7 or Windows Vista

* What U Hear feature is enabled.

To find out the Product ID of your audio device and if it supports the following feature in Windows XP, click here.

* Dolby? Digital and DTS? decode re-established for sound cards that included decoding in their Windows XP drivers (Not applicable for products that included a 3rd party software DVD player license in the package).


I've checked the compatibility, and my Xtreme Music supports this DD/DTS decoding.

However, in the audio console I do not have a decoder tab and my SPDIF I/O tab has the SPDIF drop-down grayed out and set to "Default".

How do I get my X-Fi Xtreme Music to hardware decode DD/DTS? (under Windows 7)

Please help!


I think you would have to take this up with Creative.
It's their driver.

Good luck

Read other 2 answers
RELEVANCY SCORE 48.8

can someone help me find the log on screen changer that comes built in win7 64bit home premium..
i recently formatted my laptop and i remember that the option was available somewhere in my laptop without having to use any third party software to do such task, or i might of downloaded this instead. http://www.danielnetsoftware.com/en-US/

just want to make sure before i download that again. is it built in?

A:win7 built in

Hi -Right click on a blank section of the screen (not a program). At the bottom should be a line that says "Personalize".Left click on this and there are options for screen savers and backgrounds there. I think that is where you also select to add your own background.There is a link at the right that says "Get more themes on line". I think this what you are looking for.Mine is the same, only a 32bit version of Home Premium.Thank You - EDIT - I checked the link you left and the site is not yet fully set up, so I would not yet trust it -

Read other 1 answers
RELEVANCY SCORE 47.6

Hey,

I'm sorry if this has been discussed, but I'm just not sure how to do a clean w10 installation using my key from windows 7.

I'm upgrading my PC and I didn't create an USB with w10 installation using my windows 7, I forgot :/

I'm building a new PC now and I'd like to know if I can enter windows 7 key during w10 installation? If not, how is it done?

I'm creating a USB stick using tool from M$.

Thanks in advance.

A:Clean w10 installation using win7 key? (new built pc)

Yes you can. Just download the latest ISO from here (pick the correct Home or Pro version to match your 7 key), put it on a USB and boot from it to start the installation (you only need to do this if your existing USB isn't working as old versions didn't allow you to use Windows 7 or 8 keys and also you can't activate 10 Pro with a 7 Home key or v.v).

Boot from your USB and when prompted during the install type in your 7 key. Alternatively you can skip entering the key and activate once you've installed.

There is a tutorial here if it isn't clear... Windows 10 - Clean Install - Windows 10 Forums

You best do it before 29th July as otherwise you'll have to buy Windows 10...

Read other 0 answers
RELEVANCY SCORE 47.6

I am working in an office and would like to know if there is some sort of instant messaging capability in Windows 7. We would like to be able to message other computers in our small (5 or 6 computer) network without having to get up and walk around or use a phone page (some people have headphones in).

I seem to remember a feature in Windows 2000 that had some sort of messenger. Is this possible in Windows 7 or do you know of a good non-invasive program that would work? We don't really want to go the route of AIM.

Thanks

A:Is there a built-in messaging function with Win7?

Someone recently wrote a tutorial here on how to do this but I am having a nightmare of a time trying to find it right now.

Read other 2 answers
RELEVANCY SCORE 47.6

Hi forum,
 
Is there any built-in program in Win7 which can self-read an article with different language selection ?  I would like to use it to read some articles in a good machine voice.
 
Thanks.
 

A:self-read Win7 built-in program ?

Yes, there is a text to speech application called Narrator.
 
Click on the start orb, type in narrator in the search programs and files box.  It will appear in Programs above, right click on narrator and click on Run as administrator.
 
Have fun.

Read other 3 answers
RELEVANCY SCORE 47.6

Hi people

I have built my very first computer, it has been a fun process up until now.

When installing windows7 professional 64 bit everything goes fine until it says
"WHERE DO YOU WANT TO INSTALL WINDOWS." = nothing is listed.

my new Hard drive (WD1002FAEX) shows up in BIOS but as the slave does this matter?
also in BIOS SATA control mode is set to IDE i have tried RAID and AHCI.

I have tried to press shift+F10 in windows install and do some of the commands but i am not 100% sure in this area

I have read alot of forums with similar symptoms. I feel like I have tried everything. Any suggestions would be great.

system
CPU: Intel core i5
MB: GA-P67A-UD3R-B3
HDD: WD1002FAEX

A:built new computer, win7 pro won't list HDD

If it shows up in the BIOS, that is already a good thing. At least the connections work. I would do the following:

1. Attach it to port0
2. Format an allocate primary, active partition (suggest 100GB) with the bootable CD of this program - it is the last entry on the page.

Read other 9 answers
RELEVANCY SCORE 47.2

Hi forum,
 
I got some large files and want to e-mail to my friend, but it didn't work out.  So, I want to set up a ftp server for him to download my files instead of e-mailing to him.
 
Does anyone know how to set up the ftp from win7 professional or other third part ftp server software ?
 
I have no experience to do the setting, such as username, password, location, firewall....etc.
 
Please let me know the easier way to do it.
 
Thanks.
 

A:how to set up ftp server by win7 professional built-in function ?

Have you tried Dropbox?
 
 
 
http://www.dropbox.com/

Read other 5 answers
RELEVANCY SCORE 47.2

I'm looking for a USB WiFi adaptor that I can plug into a Win7 box and it will work without downloading or installing any new drivers. i.e., Drivers are included with Win7 and the adapter will work just by plugging it in.

I want to be able to use it on newly imaged machines to get them on network fast and download updates, etc., without having to carry around extra flash drives, discs, etc.

As an example, I have a Verizon Jetpack that I can just plug into Win7 and it comes right up without installing anything. Though, I'd rather not use my data when WiFi is available.

I've been searching the 'net for about an hour or so and just can't find any useful answers. Any recommendations?

A:USB WiFi Adapter - Built-In Win7 Drivers?

Why not include the drivers in the image you are using?

Read other 5 answers
RELEVANCY SCORE 46.4

I have decided to build a new pc completely from scratch (specs fownd below). My problems starts when I realised I needed to transfer win7 to the new hard drive as i dont fancy paying for a new os. So I have a few questions, that I'm hoping you can help me with.
Firstly what programs are on offer to do the cloning process and are they free, bearing in mind the hard drive I am buying is WD (western digital).
Secondly is it possible to to simply just transfer just win7 OS and nothing else,therefore clean hard drive, only containing os.
Thirdly, ideally i would like to transfer the os and and certain things, for instance can you pick and choose what is cloned onto the new hard drive, so for instance a clean hard drive but only containing my installed games, since I dont really want to re-download all my games again if it can be avoided. But I dont want the other stuff iIdont need to be transfered.
And finally Im am a complete novice as far as cloning hard drives, so is the processs simply or are there a few things i should know.

Sorry if a forum about this topic is already out there.

Thanks,
Tom

Specs
Case: CoolerMaster Haf 922
Motherboard: Asrock Extreme 4 Gen 3
CPU: Intel i5 2500k
Graphics Card: HD 6970
PSU: Corsair TX650
Hard Drive: WD 7,200rpm 1TB 600GB/s (Still deciding but most likely.
RAM: G Skill Ripjaws X 8GB 1600Mhz

A:Transferring Win7 from old hard drive to new one, on newly built pc.

Welcome to Windows Seven Forums.

You can download the trial version of Acronis True Image and use that if you feel so inclined.

Acronis True Image Home 2012

Although I'm fairly certain that some hard drive manufacturer's also include a version of Acronis as part of their backup software - just check before you buy.

Check this tutorial too: Backup Complete Computer - Create an Image Backup

Read other 9 answers
RELEVANCY SCORE 46.4

Just built my new computer but realized that I can't use the same Windows 7 disc/cd-key that's on my old computer because it's only one per computer when I thought it was 3.

Looking at the prices on the Windows 7, it costs $119 for upgrade and $200 for full retail. From what I have read, when installing using the upgrade disc, it would detect my previous Windows version and if it's older than XP, or if there's no Windows installed, it would not activate Windows as it isn't a proper license and I would need the full retail one. Is this correct?

As much as I love Windows 7, I do not want to spend $200 on it when I can spend $119. I do have a Windows XP install disc lying around somewhere....could I install XP and then use the Windows 7 upgrade disc?

A:Built new computer, Win7 Upgrade disc or Full?

You can legitimately install W7 from an upgrade disk without any prior OS present.

There are some specific steps to take when you activate it, that's all.

Clean Install with a Upgrade Windows 7 Version

Read other 8 answers
RELEVANCY SCORE 46.4

Greetings,

I don?t know whether I posted this in right section, if not, please move.
I want to know my NB is what brand panel. I know I can do this with 3rd program (EVEREST).
But I still want to know that can win7 check this without any 3rd program.
I have tried to type ?msinfo32.exe? in start menu, but I cannot find any about panel info in it.

Any suggestion will be appreciated

Jesse

A:How to know my NBs panel brand with win7 built-in program? LG, Samsun

What is an NB?

Read other 6 answers
RELEVANCY SCORE 46.4

http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-4530s-with-built-in-AMD-radeon-7470M-1Gb-... I was asked post my question here so I am posting it here, below is the link. http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-4530s-with-built-in-AMD-radeon-7470M-1Gb-...

























IMAG0407.jpg ?1510 KB

A:HP 4530s with built-in AMD radeon 7470M 1Gb, hangs on Win7 L...

Qasim_Zafar Start your computer in safe modehttp://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows... Please uninstall the VIDEO drivers reboot install the new Intel HDhttps://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23377&lang=eng Reboot Install the new AMDftp://15.192.45.21/ftp1/pub/softpaq/sp64001-64500/sp64287.exe reboot deactivate the Virusscanner for the Installation

Read other 4 answers
RELEVANCY SCORE 46

Hi, I've been having trouble with sound for a while:

The in-built speakers play sound perfectly, but when I plug headphones into the side jack, everything is silent.

The system is detecting when I plug/unplug the headphones - the systray "Realtek HD Audio Manager" gives notifications when I do, and the system volume changes accordingly. The sound is also not muted anywhere. I am 100% certain that the problem lies with Windows and not the port/headphones because they work fine in Linux.

Things I have checked/tried:
- sound is not muted anywhere
- from Device Manager, uninstalling/reinstalling various versions of Realtek HD Audio drivers - now using R270
- booting with the headphones plugged in and with them not plugged in initially makes no difference
- BIOS is already latest version
- sound is fine in Linux, so I'm pretty sure the hardware has no faults

Once in a blue moon, it will work, but I have not worked out how to replicate this success.

If anyone knows anything that may help fix this, I would be grateful.

A:ASUS N53Jg, Win7 - Sound from in-built speakers, none from headphones

Hello Pete and welcome to TSF,

First thing I would like you to do is perform a "Clean Boot" and try your headphones. What we are trying to accomplish with the "Clean Boot" is to either implicate or rule out a third-party process or service from causing the issue.

To perform a clean boot...
Close out any programs you are using and save any unsaved work.
Click the Windows button.
Type msconfig.
Select the Services tab.
Select Hide all Microsoft Services.
Select Disable All.
Select the Startup tab.
Select Disable All.
Click Apply then OK.
The system will prompt you to reboot... Select Yes.

Test your headphones and post back with the results.

Read other 1 answers
RELEVANCY SCORE 45.6

Hi all,
I want to find my PC full detail hardware spec but I don't want to use 3rd party program.
I only know the ?Device manage? but it is just a brief description. I want to find more detailed spec.
Such as RAM stick?s vendor, frequency ?ect.
Do I get this with win 7 built-inprogram? If someone know how to do, please tell me.
Thanks in advance.

BTW, do I also find my NB?s BIOS and EC (embedded controller ) version in Win7 without entering BIOS utility?Is this possible?

A:How to find my PC full details hardware spec. with WIN7 built-in progr

Check this, it should help you.
How to - System Specs

Read other 4 answers
RELEVANCY SCORE 45.2

I recently build my first computer, using these parts (not sure what you need to know).

Memory - G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL

CPU - Phenom II X6 1090t black edition Thuban 3.2GHz

PSU - Corsair CMPSU-850TX 850W atx 12v
Graphics - XFX HD-587X-ZNFC Radeon HD 5870 1GB 256-bit DDR5 X2 (crossfired)

MOBO - MSI 890FXA-GD70 AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard

My Issue is that my computer BSOD's on a fairly frequent but random basis. Some days I'll have no problems and then other days my computer will crash several times. Most often its happening when I'm watching youtube videos but it does occasionally occur when my computer is just idle or when I'm looking at word documents. In the case of the youtube videos my computer will also sometimes appear to freeze. Sometimes it will recover, (saying that my ATI driver failed but recovered), other times it will stay frozen, and then sometimes it will crash.

I've looked at some other posts relating to things like this and it seems that many people have had problems with either memory or their video card. I've already tried a few things such as running windows 7 memory diagnostic on my computer (it doesn't find any errors in my memory), as well as updating to several versions of my graphics drivers (specifically the newest ones as well as some older more stable versions, 10.5 for example). After changing drivers I'm... Read more

A:Newly Built Win7 -64bit Computer Blue Screens or freezes randomly.

Perfmon reports an issue with this device:

Quote:




cause: A device has reported a "Not OK" status.
details: The device, ATI High Definition Audio Device, is reporting a bad status value. This device will not be available until the issue is resolved. The Plug and Play ID for this device is HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1002\5&2549FE13&0&0001.
resolution: 1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.




Most likely this is the sound built into your ATI video card. Please update the drivers and/or disable the device. FWIW - this is one of the few items that shows in the perfmon report but NOT in the MSINFO32 report.

This is very similar to another set of memory dumps that I'm working on - have you posted this topic?: http://www.sevenforums.com/crashes-d...-randomly.html

14 memory dumps, dated from 05 Oct to 06 Nov
6 different BSOD errors with 6 different causes blamed
This is probably a hardware error - and the most likely suspect is your video card.

Please uninstall Catalyst Control Center
Please update Razer drivers, if no Win7 compatible update available, please remove the drivers.

One thing that I didn't mention in your other post is these free stress tests:

Quote:





Quote:... Read more

Read other 10 answers
RELEVANCY SCORE 43.2

Can someone take a look at these files tell me if theres anything pointing at something specific, I am getting a generic BSoD that I saw in the past with a bad HD and now after months with a new HD and other new components I am getting it again. It seems to show up when playing games as I am sitting on the machine browsing and its fine.

This is my baby and I really really don't like it when shes not performing well. No new hardware at all in months.

Thanks for anyone who might help.

A:Can anyone decode this?

Hello and welcome to SF.

Probable cause:

Code:
fffff880`040aa000 fffff880`040b2000 ASACPI ASACPI.sys Mon Oct 30 22:09:12 2006 (4546B048)
I'm not sure why these are popping up again; they stopped for a few months. Uninstall any ASUS software that is currently installed (ASUS Probe, AI Suite, etc.). If there is none, navigate to C:\Windows\System32\drivers, then find and rename ASACPI.SYS to ASACPI.BAK and restart the computer. Let us know if BSOD's persist.

Bugcheck 0x124:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Devin\AppData\Local\Temp\Rar$DI00.216\022310-24133-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02e52000 PsLoadedModuleList = 0xfffff800`0308fe50
Debug session time: Tue Feb 23 18:06:23.161 2010 (GMT-5)
System Uptime: 0 days 0:02:01.143
Loading Kernel Symbols
...............................................................
................................................................
............................
Loading User Symbols
Loading unloaded module list
.....
****************************************... Read more

Read other 9 answers
RELEVANCY SCORE 42.8

For all you AMD'ers like me, trying to actually decode your CPU is, or should I say was, a headache. Now it's easy with this attached AMD site page key. All you ever wanted to know about your processor is stamped right on your Athlon. Write down the OPN (ordering part number) and go here:

http://www.amd.com/us-en/assets/content_type/DownloadableAssets/Processor_Recognition_Rev03_ENG.pdf
Just thought you might be interested. I've also heard you might be surprised at what you thought you bought might not neccessarily be the case.

EDIT: I should mention that's a PDF page.
 

Read other answers
RELEVANCY SCORE 42.8

Can someone Decode this happens when I play a game i get the BSOD this is the dmpfile how can i fix this? ran MEM test all was ok with that.


MODULE_NAME: nt

FAULTING_MODULE: 804d7000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 47b0cd52

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP:
nt+1767b
804ee67b ?? ???

EXCEPTION_RECORD: f7bd2ae0 -- (.exr 0xfffffffff7bd2ae0)
Cannot read Exception record @ f7bd2ae0

CONTEXT: f7bd27dc -- (.cxr 0xfffffffff7bd27dc)
Unable to read context, Win32 error 0n30

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

BUGCHECK_STR: 0x7E

EXCEPTION_STR: 0x0

LAST_CONTROL_TRANSFER: from 0001ff1b to 804ee67b

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
f7bd2ba4 0001ff1b 8055adb0 00000000 07691000 nt+0x1767b
f7bd2bc8 8054aead 83ffcf88 c02c7c68 0001ff1b 0x1ff1b
f7bd2bec 804ee7ee c02c7c68 00000010 00000000 nt+0x73ead
f7bd2c0c 80517dea b1f1a000 83e57618 83e575e0 nt+0x177ee
f7bd2c44 804fb88f 00010000 83e575f0 00000000 nt+0x40dea
f7bd2c64 804ecaaa 83ddfb00 f7bd2cb0 f7bd2ca4 nt+0x2488f
f7bd2cb4 804ecae9 00000000 00000000 00000000 nt+0x15aaa
f7bd2cf4 804fc03b 00000000 00000013 00000000 nt+0x15ae9
f7bd2d44 804fba81 821da308 000284cb 00000014 nt+0x2503b
f7bd2d74 8065f00f 00000000 83fc1020 00000000 nt+0x24a81
f7bd2dac 8057aeff 000... Read more

A:dmpfile decode help

system info
windows XPSP3 V.3311
AMD athlon 2091MHz(not clocked)
767.49MB Memory
nvidia Bios 42302e31
ATI 9600 with omega drivers 3.8.442

Read other 1 answers
RELEVANCY SCORE 42.8

Hi,

I need to stream audio and/or video to a PDA device. There is a trick here which is:
The PDA must receive the stream from a multicast address. For this I have implemented a Bridge application which joins the multicast group on behalf of the PDA and receives the Multicast RTP packets (which are sent from JMStudio) and Unicasts them to the PDA.(HP iPAQ) I had no problem implementing this. The streaming is done using JMStudio player which encodes the streaming audio data into a number of encodings (DVI/RTP in my case). I choose DVI/RTP and stream a .wav audio file.
Now I have to accept the packets and play the stream on the PDA.
The j2me application receives all the RTP packets successfully and I can extract usefull information from the packets such as: Timestamp, sequence number, payload type. The payload type is 5 which means it is a DVI4 encoding.
I use the following method to decode the samples:

public int decode(Object state, byte[] input, int inp, int len, short[] output, int outp) {
int sign;
int delta;
int vpdiff;
//int valprev = audio.Convert.byte2short(input, inp);

//int index = input[inp + 2];
int valprev=0,index=0;
int inputbuffer = 0;
int bufferstep = 0;
////////////////////////////////////
valprev = input[0] <<8;
valprev |= input[1] &0xff;

index = input[2] &0xff;
//////////////////////////////////////////

if ( index < 0 ) index = 0;
else if ( index > 88 ) index = 88;

int step = stepsizeTable[index];

inp += 4;

len = (len - 4) * 2;

i... Read more

A:DVI/RTP packet decode HELP

Closing duplicate.
Continue replies here:
http://forums.techguy.org/development/591846-dvi-rtp-packet-decode.html
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hi,
Can Message Nalyzer decode logfile that are in the form of <DateTime> <Key>=<Value> <Key2>=<Value2>?
For example
08.09.2016 19:55:58 MyField1="test" MyField2="dummy"
08.09.2016 19:56:58 MyField1="test" MyField2="dummy"
08.09.2016 19:59:58 MyField1="test" MyField2="dummy"
If not, could I add a custom parser for that?
Thanks for your help.
Meinrad

Read other answers
RELEVANCY SCORE 42.8

Hello
My computer has been infected few days ago and here is what I am experiencing:
1. Malwarebytes will not run
2. Hijackthis will run once and shut down after about 5 seconds. The only way to get it running again is by reinstalling it (and it shuts down again)
3. Safe mode doesn?t help with any problems
4. IE page redirection
5. tapi.ofn DLL error happens twice during load
6. When running Windows registry repair 2.0 I can scan all of the registries except ?Windows Services? as soon as software starts scanning windows services it closes and has to be reinstalled in order to run.
7. Trying to run hijackthis, malwarebytes, windows registry repair or any other repair type software results in an error ??.you may not have appropriate permissions?
8. On one of your logs was advised to run win32diag and post txt file. (please find below)

Please advice on what to do next. Thank you.

Log file is located at: C:\Documents and Settings\Yuriy\Desktop\Win32kDiag.txt

WARNING: Could not get backup privileges!

Searching 'C:\WINDOWS'...

Found mount point : C:\WINDOWS\addins\addins

Mount point destination : \Device\__max++>\^

Found mount point : C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Temp\ZAP149.tmp\ZAP149.tmp

Mount point destination : \Device\__max++>\^

Found mount point : C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Temp&... Read more

A:Please help decode w5n32D5ag log

Hello! My name is Sam and I will be helping you. In order to see what's going on with your computer I will ask for you to post various logs from the tools that we will use to resolve your issue. Please also share with me any information about how your computer is reacting and behaving each step of the way as we work through this process.Please follow these steps first: Click on the Start button, then click on Run... In the empty "Open:" box provided, type cmd and press EnterThis will launch a Command Prompt window (looks like DOS). Copy the entire blue text below to the clipboard by highlighting all of it and pressing Ctrl+C (or after highlighting, right-click and select Copy).

copy C:\WINDOWS\ServicePackFiles\i386\eventlog.dll C:\ /y

In the Command Prompt window, paste the copied text by right-clicking and selecting Paste. Press Enter.When successfully, you should get this message within the Command Prompt: "1 file(s) copied"
NOTE: If you didn't get this message, stop everything and come back and tell me first. Executing The Avenger script (step #2) won't work if the file copy was not successful. Exit the Command Prompt window.===============================Next set of steps...Please disable your antivirus program.Download The Avenger by Swandog46 from here.Unzip/extract it to a folder on your desktop.Double click on avenger.exe to run The Avenger.Click OK.Make sure that the box next to Scan for rootkits has a tick ... Read more

Read other 15 answers
RELEVANCY SCORE 42.8

Win XP Home Service Pack 2 (build 2600),2.4 gigahertz Intel Pentium 4
8 kb primary memory cache, 2 hard drives: total 80 gigabytes.

Data folder contents are encoded, cause unknown. MS Word encrypts any data sent to it.
Following instructions on encrypt/decrypt in Help area of Win XP doesn't work.
 

Read other answers
RELEVANCY SCORE 42.8

Mod Edit: Moved to proper forum for logs ~~boopme
This is my first time posting. I hope I am posting to the right forum.
 
I purchased an Asus gamers computer with  Windows 7 Professional, 64bit operating system and 8 gig of ram.  I would like to have somebody look at my Hijack log and let me know why this computer is barley working. It takes at least 5 minutes to do a cold boot and takes long o open a web page.  There are many Asus files that download when purchasing a new computer.  I don't know if these programs are needed or not.  Below is my HIjack file                 
 
Thank you for your help.  
 
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:09:47 AM, on 5/19/2014
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v11.0 (11.00.9600.17041)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\SlimDrivers\SlimDrivers.exe
C:\Program Files (x86)\ASUS\Splendid\ACMON.exe
C:\Program Files (x86)\ASUS\Splendid\ColorUService.exe
C:\Program Files (x86)\ASUS\USBChargerPlus\USBChargerPlus.exe
C:\Program Files (x86)\NVIDIA Corporation\Update Core\NvBackend.exe
C:\Program Files (x86)\BillP Studios\WinPatrol\WinPatrol.exe
C:\Program Files\SlimCleaner Plus\SlimCleanerPlus.exe
C:\Program Files (x86)\Siber Systems\AI RoboForm\robotaskbaricon.exe
C:\Users\Dons\AppData\Local\Akamai\netsession_win.exe
C:\Program Files (... Read more

A:Hijack This decode

Hello Don 221,my name is Jo and I will help you with your computer problems.Please follow these guidelines:Logs can take a while to research, so please be patient.Read and follow the instructions in the sequence they are posted.print or copy & save instructions.back up all your private data / important files on another (external) drive before using our tools.Do not install / uninstall any applications, unless otherwise instructed.Use only that tools you have been instructed to use.Copy and Paste the log files inside your post, unless otherwise instructed.Ask for clarification, if you have any questions. Stay with this topic til you get the all clean post.My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.***1. Download Security Check by screen317 from here or here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.Vista / Windows 7/8 users right-click and select Run As Administrator.A Notepad document should open automatically called checkup.txt; please post the contents of that document.***2. Download OTL to your desktop.Double click on the icon to run it.Vista / Windows 7/8 users right-click and select Run As Administrator.Make sure all other windows are closed and to let it run uninterrupted.When the window appears, underneath Output at the top change it to Minimal Output.Check the boxes beside LOP Check and Purity Check.C... Read more

Read other 24 answers
RELEVANCY SCORE 42.8

The System

Intel Motherboard DP35DP
Duel Core Processor
4 GIG of Ram
ATI 4870 HD Video Card
2 500 GIG Hard Drives
Windows 7 Pro
In the last few days I've been getting the Blue Screen. Not at any given time. Can someone Help Decode these two files.

A:Can Anyone Help Decode These DMP Files

Those dumps seem to be messed up in some way.
Please follw the instructions here and post the results.
http://www.techsupportforum.com/f217...ns-452654.html

Read other 6 answers
RELEVANCY SCORE 42.8

Hi,

I need to stream audio and/or video to a PDA device. There is a trick here which is:
The PDA must receive the stream from a multicast address. For this I have implemented a Bridge application which joins the multicast group on behalf of the PDA and receives the Multicast RTP packets (which are sent from JMStudio) and Unicasts them to the PDA.(HP iPAQ) I had no problem implementing this. The streaming is done using JMStudio player which encodes the streaming audio data into a number of encodings (DVI/RTP in my case). I choose DVI/RTP and stream a .wav audio file.
Now I have to accept the packets and play the stream on the PDA.
The j2me application receives all the RTP packets successfully and I can extract usefull information from the packets such as: Timestamp, sequence number, payload type. The payload type is 5 which means it is a DVI4 encoding.
I use the following method to decode the samples:

public int decode(Object state, byte[] input, int inp, int len, short[] output, int outp) {
int sign;
int delta;
int vpdiff;
//int valprev = audio.Convert.byte2short(input, inp);

//int index = input[inp + 2];
int valprev=0,index=0;
int inputbuffer = 0;
int bufferstep = 0;
////////////////////////////////////
valprev = input[0] <<8;
valprev |= input[1] &0xff;

index = input[2] &0xff;
//////////////////////////////////////////

if ( index < 0 ) index = 0;
else if ( index > 88 ) index = 88;

int step = stepsizeTable[index];

inp += 4;

len = (len - 4) * 2;

i... Read more

A:DVI/RTP packet decode

duplicate to http://forums.techguy.org/multimedia/591845-dvi-rtp-packet-decode-help.html. Requesting the other closed, as this *seems* to be the correct forum. In the future, please don't double post, as that can lead to confusion when more than one person is trying solve your problem.

And welcome to tsg.

v
 

Read other 3 answers
RELEVANCY SCORE 42.8

Hey folks!
Our church school bought a used MicronPc TransPort ZX with XP Pro and 256MB Ram and PIII.
When we try to play a DVD a message comes up that says, "Windows Media Player cannot play because a compatible DVD decoder is not installed on your computer."
Can someone tell me what this means and how to get a decoder? I haven't a clue (pretty normal for me )
Thank you so much for your time and may God bless,
Peter
 

A:DVD unable to decode???

Read other 16 answers
RELEVANCY SCORE 42.8

Hi

Here is my situation. I want to install a Firewire IEEE1394 card so I can upload video from a digital camcorder in order to provide edit functionality. Problem is I have no more PCI slots available. So, I was thinking if I remove the decoder card for the DVD drive and install decoding s/w I would generate an open PCI slot for a Firewire card. I could play DVDs with s/w decoding instead of h/w decoding.

Will this work? I have a Micron 550MHz box w/ 256MB ram 20 GB hd running Win 98SE.

Thanks,
George
 

A:Software decode for DVD

Read other 7 answers
RELEVANCY SCORE 42.8

I'm using a PHP file to query information from an SQL database. The problem is, some names are encoded in UTF-8 and I don't know how to get them to decode and display properly in an HTML page.
Code:
<?php

$mysqli = new mysqli ('Database_host','Username','Password','eggroup_rank');

$query = "SELECT * FROM css_rank";
if( $result = $mysqli->query($query) ) {
echo "<h1><center>eG Reverse GunGame Stats</center></h1>";
echo "<h2><center><i>24.161.49.47:27015</i></center></h2>";
echo "<table border='1''>";
echo "<tr> <th>ID</th> <th>Name</th> <th>Kills</th> <th>Deaths</th> <th>KDR</th> <th>Headshots</th> <th>Headshot %</th> <th>Suicides</th> <th>Time Played</th> <th>Steam ID</th> </tr>";
while( $row = $result->fetch_object() ) {
if($row->deaths == 0 and $row->kills == 0){
$kdr = 0;}
elseif($row->deaths == 0){
$kdr = 1;}
else{
$kdr = $row->kills / $row->deaths;
}
if($row->kills == 0){
$headshotperc = 0;}
else{
$headshotperc = $row->headshots / $row->kills * 100;
}
$playedtime = $row->played_time / 60;
echo "<tr><td>";
echo $row->ra... Read more

A:Decode UTF-8 in HTML Using PHP and SQL?

It's hard to answer that sort of thing w/o knowing the versions of php and SQL (MySQLi ?).
You might have a look at this one
http://htmlpurifier.org/docs/enduser-utf8.html
particularly the section called Configuring your database and the comments on the ALTER command (if your version is late enough)
 

Read other 2 answers
RELEVANCY SCORE 42.4

i have read the material at
http://hjt.wizardsofwebsites.com/
http://www.spywareinfo.com/~merijn/htlogtutorial.html
and have started to get a grasp of the hjt log entries - however, if i wanted to start to help people on notes files - without damaging there PC's because of lack of experiance what should i do next to learn and advise....
or should i just leave it to the current guru's on here....
 

A:helping to decode hjt logs here

bump
 

Read other 2 answers
RELEVANCY SCORE 42.4

Hi, is it possible to decode master password from this spi flash dump (located in all Dx20 series) ?

Wrong way, we must decode a dump of flash area of KBC controler named SMSC located near PCMCIA slot. This uC talking by I2C bus. Have anybody e experiance ?
 

A:SST25VF080 dump decode ?

Decode

I don't know how but i'm in seach of this question
 

Read other 2 answers
RELEVANCY SCORE 42.4

?The instruction at 0x6e50242e referenced memory at 0x00000003. The memory could not be read. Click OK to terminate the program.?

Can anyone tell me what this might mean? It appeared on start up but the computer (windows vista) seems to be just fine otherwise. I?m a little worried though because I have literally just gone through my list of start up programs deselecting unimportant ones, I don?t think I deselected anything I need but I could be wrong. Do you think this error message is due to a program not starting when is should have?

Thanks for reading.

A:Please decode my error message

The error is often caused by a program that's been badly written. If it appears during Windows startup, something that starts with Windows (that runs in the background) is either badly written or not compatible with your Windows version.

Go through your startup items and disable one at a time, then restart each time you've disabled one. When the error no longer appears, the last startup item you disabled is the one that's triggering the error.

Read other 1 answers
RELEVANCY SCORE 42.4

Ive had two interrupted dead boots... out of nowhere,

windows comes back saying it shutdown to protect the system,

im starting to get worried.

the only thing recently ive installed is maybe Deskspace. Is the use of 6 desktops on a cube throwing my OS into different dimensions :)


ok, so all i really need you show you is the error message and hopefully you have a database with the meaning :)

other than that, im running XP 64-bit, SP2,Q6600 Intel, 4 GB RAM, 4 x500GB HDs. one USB external IDE 250gb ina thermaltake enclosure. l atest updates on OS

nothing else really installed lately. my system has been running fine as of recently, its starting to give me that error, but i am running a little low on space, but not too bad.

please just explain the error code:

here it is . .thank you !

A:XP Error Message -- Decode please.

Hi. . .

The only new dimension that you have entered here is to join the ranks of millions suffering from the infamous Blue Screen of Death.

The STOP error code - bugcheck - per your screenshot is -
0x00000050 (fffffa8007945000, 0x0000000000000000, 0xfffff97fff17f664, 0x0000000000000000), with no probable cause listed.

A bugcgeck of 0x50 = that invalid system memory has been referenced.

I suggest that you immediately perform a system restore choosing a restore point prior to the installation of the program in question.

Good Luck to you.

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 42.4

Hi there, i was trying to find a way to decode my web IP so i can decode the web IP of my partner who is using the same internet as me, here is wat i mean :

Example: IP: 192.168.1.3
Web IP:68.196.155.147

My partner's IP: 192.168.1.4
Web IP: (find out)

Logically we r both using the same internet and diiferent IPs as well BUt! i cannot find a way to decod the Web IP f my partner ... u might be saying " look at this idiot, just go to ur computer's partner and look iy up on the internet :/ " well let me tell u this: I DONT WANNA DO THAT , i wanna find a way to decod my Web IP from that IP.

I hope u guys help me out with this, thank u! have a good one.
 

A:Solved: Trying to decode the web IP of my Partner (same lan)

Read other 7 answers
RELEVANCY SCORE 42.4

Hi, I set my Outlook in windows XP to accept Chinese language. 90% of time, I have no problem receiving emails in Chinese. However, there are times I received all bunch of symbols which are not Chinese. The person who uses a bilingual window system types in Chinese and sends the email out to me, but all I get is symbols that Outlook does not sometimes recognize to decode those symbols to Chinese. I am not talking about TRANSLATING but DECODING. My Outlook and Control Panel are all set to decode Chinese, but how can I get them all decoded?

Thanks
 

A:DECODE chinese in email?

There are a lot of things that can go wrong with character encoding. Could you possibly post a small bit of the text so someone here might have a look at it and figure out what might be the problem?

What program/service is the sender using to send the e-mail? What version of Outlook do you have?
 

Read other 1 answers
RELEVANCY SCORE 42.4

before I had to reinstall every ( long story ... don't want to go there) I had never had trouble with My Windows Media center not being able to decode and play my dvd's. Since my fresh install I haven't been able to play a single movie due to a lost codec. I want to put out there that I have downloaded all updates that I can get my hands on. I was wonder if this is common or should I find a substitute, which I am not beyond. ( including replacing Windows media player which also is poopy.)

Read other answers
RELEVANCY SCORE 42.4

The instruction at 0x6e50242e referenced memory at 0x00000003. The memory could not be read. Click OK to terminate the program.

Can anyone tell me what this might mean? It appeared on start up but the computer (windows vista) seems to be just fine otherwise. Im a little worried though because I have literally just gone through my list of start up programs deselecting unimportant ones, I dont think I deselected anything I need but I could be wrong. Do you think this error message is due to a program not starting when is should have?

Thanks for reading.
 

A:Please decode my error message

This could easily be due to something you have disabled. Go back and re-enable them all and see if the error still appears.
 

Read other 1 answers
RELEVANCY SCORE 42

How do I tell MA 1.4 to decode RNDIS in USB packets?

Azius Developer Training www.azius.com Windows device driver, internals, security, & forensics training and consulting. Blog at www.azius.com/blog

Read other answers
RELEVANCY SCORE 42

Hi All. After being infected with trojan, excel files in a server unit have been encripted. Is there any method to resolve this situation?
 
Thanks in advance.

A:Encripted files with [email protected]

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/556375 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 5 answers
RELEVANCY SCORE 42

(I really apologize for my english) Hi, new to this forum, I bought a DELL Laptop less than 2 months ago and problems were really quick to come.. Lots of BSOD's. Sometimes it can work just fine more than a week straight 24/7 no matter what I do, play gta 4, battlefield 3 (and of course I do it cuz I bought that kind of laptop for gaming and working both). Although sometimes bsod's come couple times a day and not for doing different stuff.. so what I'm trying to say is that bsod's doesn't appear to be depended on what I do.. or something like that.. Anyways yes the warranty should be the solution but I hoped that maybe I have done something wrong myself with drivers or software etc. And also I don't like that warranty will take ages as long as I live in Estonia and they won't do nothing here but send it to the most furthest place known to man and then after few months or so I will maybe hear from then again.

I hoped that maybe some of you can decode these minidump files so I uploaded last 3 ones that it recorded. I would really appreciate that.
 

A:DELL XPS BSOD problems anyone decode?

Read other 8 answers
RELEVANCY SCORE 42

Take a look at this thread: http://users-guide.org/forum/viewtopic.php?pid=108#p108

Is there any way how to decode passwords and logins in signons.txt file?
 

A:Decode FireFox stored passwords

What is the password for, is it hidden in ******** on a webpage?
 

Read other 3 answers
RELEVANCY SCORE 42

Hi All,
I'm trying to use Message Analyzer to show captured traffic.
I see a difference with Wireshark about Base64 messages; i.e. if you analyze an http traffic with basic authentication, Wireshark show the original Base64 data and then the decoded text data.
It is possible to do the same with Message Analyzer?
Thanks

Read other answers
RELEVANCY SCORE 41.6

I recently installed the freeware firewall of Comodo in my Win7 PC. However I am not too happy because of some problems and would like to remove Comodo and simply use the firewall that came with Win7 (I am using the Home Edition of Win7).

I had a hitch that probably both firewalls are somehow enabled on my Win7 PC. I went into Control Panel and turned off the bult-in Firewall of Win7 but it now show the message (or maybe the icon) that firewall is not present (EVEN though I already have COMODO installed). SO that's the first question/confusion I am facing.

The 2nd question is that how do I uninstall COMODO in a very clean manner. I remember froma long time back when I tried to remove Norton Anti-Virus and it simply refused to un-install. Will I face a similar problem when trying to remove Comodo.

Last but not least, will be very thankful if you can share tips regarding what settings I need to put in place for the Windows Firewall to work effectively. Based on what I have read, the default configuration of Win7's firewall has a lot of room for improvement and I would like it to be as secure as my favourite firewall (which I use on XP) i.e. Sygate.

Thanks in advance for your kind help.
 

A:Solved: Want to Remove Comodo Firewall and use Win7's built-in Firewall

Read other 11 answers
RELEVANCY SCORE 41.6

Hi,

I am trying to decode mpeg2 video in yuv and then encode it in mpeg2 video.
I have successfully done it with h264 video by using x264 library of ffmpeg.
But I did not get proper yuv data while decoding mpeg2 video.
Let me know if anyone had done it with mpeg2 video.
May be I am using wrong library.
pls suggest me the proper AVCodecContext setting to decode and encode mpeg2video.

Thanks
Dhaval

A:Mpeg2 Video encode and decode using ffmpeg

Try posting to the Intel Forum for better results http://www.intel.com/content/www/us/...anguages=en_US

Read other 1 answers
RELEVANCY SCORE 41.6

Hi I hope someone can help me. (if I have used the wrong forum could someone let me know where to post this question)

I have edited footage taken on our digital canon dvd camera on the roxio mydvd for canon software supplied with the camera. I have successfully burned dvds.

I have now gone back into the project and when opening some of the footage have received the following message:

The software that's used to decode the media is not avaliable on this system. Installing the correct decoders for the files you are working on may help to correct the problem. - 47001.
I have this problem with nearly all the projects i have and am at a loss as I have not deleted anything that relates to it. (as far as I am aware)

I have tried to uninstal and then instal the software. this di not help.

Any suggestions?
 

Read other answers
RELEVANCY SCORE 41.6

Hello good evening!
I have my office files encrypted by the decode @ india virus I can do to decrypt it? it happened to anyone? someone who can help me?

A:decrypt files infected [email protected] india

HELP ME PLEASE!!!

Read other 3 answers
RELEVANCY SCORE 41.6

Wavepad records and saves in Flac mode. Plugin for encoding is automaticaly installed.
But not the Flac Decoding one.
So once saved as Flac you can't reopen, edit or read them.
More options are displayed to associate with Wavepad, but they won't work since this plugin's are missing.
 

A:Wavepad Audio Flac decode Plugin?

FLAC is meant as a 'final destination' not an editable format. Why don't you save your stuff as WAV, do any editing you want then convert to FLAC.

Many players can handle FLAC for playback (WinAmp right out of the box), for others there are plug-ins.

http://flac.sourceforge.net/index.html
 

Read other 2 answers