Over 1 million tech questions and answers.

Blue screen of death B590

Q: Blue screen of death B590

Hello. I recently started getting a lot of BSOD's with the 0xdeaddead code. I went through all fixes I could find online but they still appeared. I reinstalled my network driver twice, since that was the problem with the most people.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Blue screen of death B590

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 64.8

In need of serious help.*
To begin, I am stupid and haven't backed up any of my files so for now a windows reinstall is out of the question. (unless it's completely necessary) okay, so the problem: I was using my computer as normal. Then while on Google Chrome, it started getting slow and said "not responding" this happens all the time, to everyone so I waited and then the dreaded Blue screen of death appeared. Didn't get a look at what it said because it shut down almost immediately. After that it loaded as normal? Which is weird, I think. But got stuck after startup on the black screen of death. All I have is a cursor. Can't do ctrl+alt+del, can't load any of the safe modes. When I go on startup repair, it says "no restore points" on system restore and "could not detect a problem" on system repair or whatever it's called. There must be something to fix this?! :/ I live in hope that the whole system doesn't need to be wiped clean because as I said, I stupidly haven"t backed up my files.*

Can anyone help?? Please?

A:Stuck on black screen of death, after blue screen of death

this sounds like it should be a BSOD thread, post a seperate thread in the BSOD section following the posting instructions for BSODs, make sure you include the dump files, if you don't know how to do that, it should tell you in the BSOD posting instructions.

Read other 9 answers
RELEVANCY SCORE 64.4

HI guys
 
When booting up my laptop in "last known good configuration" mode i keep getting the blue screen of death and the laptop freezes and cuts out and is very over heated. When i have booted up in "safe mode with networking" the latop is still over heating but it dosn't freeze or i don't get the blue screen of death. I am also limited to what i can doin safe mode.
 
Any ideas what the problem could be please chaps?
 
Thanks in advance
 
Tony

A:Blue screen of death on normal boot up but no blue screen in safe mode ?

Exact wording of BSOD error message?
 
System manufacturer and model?
 
Conditions/events which may have led to this?
 
When did problem begin?
 
Louis

Read other 14 answers
RELEVANCY SCORE 62

Last month, kept getting blue screen of death with various errors at bottom: MEMORY_MANAGEMENT, CRITICAL_STRUCTURE_CORRUPTION, IRQL_NOT_LESS_OR_EQUAL. Been happening sporadically before but amped up last month for a few days. Stopped until last night, this time I got an orange screen of death and the error was CRITICAL_STRUCTURE_CORRUPTION (win32kfull.sys).
 

Read other answers
RELEVANCY SCORE 62

Hello everyone.

I have a Toshiba Satellite L450D-13X computer for the kids, and for the price it's a good laptop. Have had no issues with it until two weeks ago when the screen froze for the boys whilst playing a game and downloading a program from the net. Had to do a force shutdown and since then we have a BSoD on every boot-up. This is what we have tried:

On 'Starting Windows' we are given an option of either 'Launch Startup Repair' which ends up as BSoD or 'Start Windows Normally' which reverts back to the 'Starting Windows' option list.
Any attempt to enter 'Safe Mode' results in BSoD.
Attempting to boot an ISO of the Windows Recovery Disk on a USB key (we did highlight it and promote it to the top) results in BSoD. Borrowing a proper Window 7 installation DVD and highlighting this as an option results in BSoD.

In fact, the only option we used that threw up something different was using advanced boot options. On one of these options we got the Blue Screen of Death with the following information:

Unmountable_Boot_Volume
Disable Bios Memory Options such as caching/shadowing

Tech info

Stop: 0x000000ED (0xFFFFFA80023C2CDO 0xFFFFFFFFC0000185 0x0000000000000000 0x0000000000000000)

I don't mind erasing the hard drive and starting again, there's nothing on it that's critical. I'd very, very much appreciate a steer on this. Checked the web for stuff and nothing seems to assist in any other options. I am not particularly tech literate but can follow instructions.

Thanks in... Read more

A:Black Screen of Death/Blue Screen of Death

Hi, malbekh; and welcome to the forum. Please read these threads and post back. We will be glad to help you.

[1 - Novice] How to ask for help with a BSOD problem

http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

Read other 2 answers
RELEVANCY SCORE 59.2

Hey,I have a big problem,after my computers starts up,the blue screen comes up then disappears,then its starts the automatic repair and disappears again,then the screen goes blue and its stays like that all the time.Cant use the computer anymore,please help thanks

A:Screen satys blue after blue screen of death

Have you tried CTRL+ALT+DEL which should when you get the blue screen should take you to be able to do a factory reset.

Read other 1 answers
RELEVANCY SCORE 58.8

Hi, thanks for checking my question. I haven't found an answer to my particular situation:

Dell xps m1430 laptop w/vista (32).

It all started with a blue screen w/scrolling text after the fated restart. The blue screen text said "if this is the first time you've seen this message..." and then comp restarted, again showing the blue screen, then restarted into windows repair mode, after repair mode tried to fix the problem comp restarted, then the screen went black / blank right after the little windows loading animation (where the bar keeps moving from left to right and there's a small windows logo).
It all happened fast, so there may have been steps I forgot, but that's the jist of it.

Now screen always goes black / blank during startup after the windows loading animation, so I can't start windows in normal mode.
I can start in safe mode if I manually force shutdown by holding the power button, so I'm not imploding with fear... ok I am.

Possible causes:
1. This occured right after installing 11 vista updates (that restart was when I saw the blue screen)

2. Also occured the restart after running a patch called "Vista TCP/IP and UAC AutoPatch 6.0" I downloaded it from softpedia, the developer was listed as defcon, and their website listed was securevista.net, but the site is down(I found this out after the problem occured). The patch had lots of positive reviews, and lots of people on other sites also suggest using it to re... Read more

A:Solved: Black screen of death at startup, all began with a blue screen

Read other 7 answers
RELEVANCY SCORE 58.8

Hello.

Just today, I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : \windows\system32\config\system."

You can attempt to repair this file by putting the winxp cd in etc...

Now when i turn on my computer there is just a black screen showing, with nothing at all on it.

Any ideas anyone?

Thanks very much for your help.
 

A:Blue screen of death, boot problems, black screen startup

It's a nasty error that requires some persistance and resourcefullness to overcome without a clean install.

If you have a Windows CD or have the recovery console installed, you might want to have a go at these directions.

http://support.microsoft.com/default.aspx?scid=kb;EN-US;307545

Forum example of a successful recovery here:

http://forums.techguy.org/showthread.php?s=&threadid=195985
 

Read other 3 answers
RELEVANCY SCORE 58.8

Today I booted my computer up to be promoted with a black screen, I gave it a good half an hour before forcing it to shutdown, to which when I booted it back up. Was then promoted with a blue screen about the video card not being able to lead, that happened twice.

I then booted it into safe mode, fiddled around with the drivers to see what was going on, after restarting it again, I got the same black screen, this kept on happening. I then concluded my best solution was to install XP, this worked the video card runs. So the card is not dead, but there are multiple blue lines going down the screen in 4 columns. After going into the device manager I saw that it claimed it was not installed, then I went to Google and downloaded the driver, after installing the computers goes to the same black screen that I got on windows 7.

I have no clue what the problem is, so any help would be most appreciated. Also I tried installing Linux, but after getting though then loading screen of the installer, it goes to the black screen. At the moment in am on my tablet so sorry if there are so many mistakes. I'll try and get some photos of how it looks.

PC Specs:

- Dell Dimension E520
- Intel pentium D
- 2gb Ram
- Nvidia Geforce 7300 LE

Photos:
N/A





Thank you, any help will be hugely appreciated.

Sean Hall.

A:Geforce 7300 LE - Blue screen of death - Multiple lines down screen.

Hi Sean,

I don't like to say it, but it sounds like the graphics card is dead. I had the same issue on an old 8800gts, it would work until I installed the drivers, then I would get very bad artifacts/lines down the screen.
I tried it on 2 different PC's with the same end result once the drivers were installed.

Paul.

Read other 5 answers
RELEVANCY SCORE 58.8

I have a Dell Latitude 5175 (Core m5-6Y57, 8GB ram, 256GB SSD) which bluescreens during full screen video playback such as Netflix or Windows media player with a Driver_power_state_failure, it doesn't happen straight away but usually after around 10-15 minutes usage.

I checked the minidump file which suggested the Intel graphics card driver was to blame, I updated that to the latest one from Dell which made no difference, updated the chipset driver, bios and then installed the latest graphics card driver from Intel again with no difference, if anything it's worse now.  The issue also occurs when the tablet is docked or when it's not docked although in normal day to day usage, it seems fine.

I've found references to this problem on some other machines, noticeably the Surface Pro 4's but not really any solution.  The next step is to try a clean build but thought I'd see if there's anything else I can try first.  The machine is out of warranty and while it's always occurred I've just lived with it as I incorrectly through the PC had a three year warranty.

A:Dell Latitude 5175 blue screen of death during full screen video playback

The text of the dump analysis is:
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, ffff9209c23f7080, ffff880c2642f7f0, ffff9209c0df93f0}
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for to... Read more

Read other 1 answers
RELEVANCY SCORE 58.8

Hello
Before i describe the problem i would like to make it clear that i would like to recover as much as possible. This problem occurred playing a game called Empires V2.1. It is a steam half 2-death match mod. I had problems in the past however i didn't not consider them problems the screen froze when the game changed map. However when it froze it wouldn't respond to Ctrl+Alt+Delete or Ctrl+Esc or the start menu button. I pressed the power button and restarted it that way. However this is when the problem occurs and i can't over come it. It starts with a normal dell screen and the loading bar crosses at the bottom as normal. Then it goes to a black page with a blue line across the top with white writing saying www.dell.com. A line (programming maybe it appears and disappears rapidly). It then goes to a black screen saying something along the lines of We are sorry for the inconvenience but windows failed to start properly. It then gives you options and no matter which option I choose I still get a blue of screen of death saying the following;

A problem has been detected and windows has been shut down to prevent damage to you computer. If this is the time you've seen this Stop error screen, restart your computer. If this appears again, follow these steps;

Disable or uninstall any antivirus, dick defragmentation or backup utilities. Check your hard drive configuration, and check for any update drivers. Run CHKDSK /F to check for hard drive corruption, and the... Read more

A:Blue Screen Of Death. Fails To Start. All Before Login Screen

Can you boot into Safe Mode? If so, try running chkdsk from Safe Mode.How to start Windows in Safe Mode

Read other 4 answers
RELEVANCY SCORE 58

So for the past 2 weeks I've been crashing none stop usually after playing game for about an hour or just browsing or watching a movie, its a mixture of Page fault in none page area, Memory management, IRQL not less or equal, among others. I don't know whats causing the crashes or any help would be greatly appreciated. i had this laptop for since early december 2009.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M500, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3836 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 320 Mb
Hard Drives: C: Total - 291444 MB, Free - 24376 MB; D: Total - 13495 MB, Free - 2249 MB; F: Total - 99 MB, Free - 95 MB;
Motherboard: Hewlett-Packard, 3642
Antivirus: Norton Internet Security, Disabled
 

A:Blue screen of death, Freezing, and black screen

Have you installed anything lately? There could be some program or service doing something that isn't needed.
How's the case temperature? Perhaps it's running too hot.
 

Read other 2 answers
RELEVANCY SCORE 58

Hello

I have a computer running Windows 7. Last night the computer was running fine. This morning when I turn it on, i get a black screen. To fix the problem I conducted a system restore. After it finished restoring, the computer restarts and everything worked fine. To make sure if everything was in working order, I restart it again. After the "Starting Windows" screens comes up, I get the Blue Screen of Death. I can't even read what the error says because the computer just restarts itself. I did not connect anything new to the computer. I performed a hardware diagnostics to see if it was a hardware failure but no error was found. I can't even get into safe mode. The SFC.exe will be my next step.

A:Windows 7 Black Screen then Blue Screen of Death

The SFC.exe did not work either.

Read other 4 answers
RELEVANCY SCORE 58

I've having an issue that I think some ppl had, windows 8 crashing going to blue screen of death or blank black screen and then it restarts by itself, also I have noticed that it says repairing disk in D:/

I have one SSD 120gb in the C:/ which it host the operating system and some minnor programs, in a HDD which is my D:/ drive there I have my games.

ASRock 990FX Extreme 9
AMD FX 8350
Kingston Hyper X 120GB SSD
WD black 500GB HDGB HDD
Corsair Vengeance 8gb Ram 2133Hz
Windows 8

Thanks for the time, if more info is needed I willl gather it and post it

A:How do I fix windows blue screen of death and black screen

Update, seems that some tweaking did fix the problem, go to search and type power, in the left click on the one that says change what power buttons do, then uncheck the box that it says turn on fast startup (recomended) then save changes and a restart and youre done -at least for me it worked-

Read other 19 answers
RELEVANCY SCORE 58

I am running windows 7 Ultimate 32 bit and facing with a big problem,I suppose.
-Black screen sometimes appears after windows is starting(after this)
-Blue screen of death always appears when I am trying to connect for more than 7/8/9/10 times on some of wireless networks,and very rarely appears when I'm playing a game or doing something on the internet.
-Some programs freeze sometimes such as Firefox,DivX Player,Winamp...
Please help me guys!
 

A:blue screen of death,black screen,freezing...

Read other 6 answers
RELEVANCY SCORE 58

This is what someone else wrote in another topic: http://forums.techguy.org/windows-vista/741250-windows-warning-message-win32-adware.html

"I booted my computer up today, and saw my background wasn't available anymore. Then I see the message, "Warning! Spyware detected on your computer! Install an antivirus or spyware remover to clean your computer". It says that Win32/Adware.Virtumonde and Win32/PrivacyRemover.M64 are on my computer."

I had the exact same problem but i followed the instructions that someone posted in that topic, these were the instructions posted by "drdrew1469":

"I just got through fixing this (I hope). What it did here was change the background and set the screensaver to the sysinternals bluescreen screensaver (which you may be seeing) while at the same time setting policies in the registry to disable the two aforementioned tabs in the Display properties window.

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System \NoDispBackgroundPage and [same]\NoDispScrSvrPage (they are both set to 1. Delete both entries.

Then check HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run for any funky alphanumeric filenames (I'm pretty sure it's just a random string anyway so posting the string probably won't help you much). Delete these keys and the associated file(s). (Doesn't hurt to check msconfig either, but I found nothing there)."

I thought that it had bee... Read more

A:Solved: Blue Screen of Death as screen saver

I removed two files on my harddrive, lphc1gbj0ecft.exe and lphc1gbj0ecft.scr, and now the bluescreen-screensaver is gone!
 

Read other 1 answers
RELEVANCY SCORE 58

Hi, I've been going through some problems with windows, I'll try to be the more clear and organized I can, let's start with my config and the symptoms I'm getting:PC Config:Core2Duo E6550GA P35 DS3 (rev.2.0)2x 1GB DDR2 800Mhz Kingston (in dual channel)GeForce 7200GS 256mb (512mb with turbo cache)HD321KJ Samsung Hard DriveSamsung SH-S203B DVD driveCorsair VX450W Power SupplyOS: Windows XP Pro x64 SP2 (I upgraded to sp2 just yesterday, before that I was running sp1)Symptoms: There are three types of symptoms, the most common is the pc simply restarting, note that I've already disabled the "automatically restart" in the system properties window and it keeps happening, other is the screen freezing, and then I have to restart it, and the last and less common is the famous Blue Screen of Death, also, but for only two times, instead of the freeze or the blue screen I got an empty black screen. All these types of crashes can happen independently of what I'm doing, It has happened while burning dvds with Nero, scanning with anti-virus, browsing the net, or even while I'm asleep and only the bittorrent client is up. Though, there is one peculiarity I think should be important, there's one program, the VirtualDubMod 1.5.10.2 (build 2540/release), which is used for various kinds of video manipulating jobs, that every time I'm enconding a video with it, there is a crash, and I'm convinced it's not only coincidence, cause I have tried a... Read more

A:Pc Restarting, Screen Freezing, And Blue Screen Of Death

Sounds to me like a hardware problem, but the stability test should have revealed that.I'd suggest searching your hard drive for files that end in .dmpThen use this post to perform an analysis on the .dmp files: http://forums.majorgeeks.com/showthread.php?t=35246Make sure you select the Debugging Tools for x64 Windows when downloading them.Then post the results here for us to have a look at.

Read other 38 answers
RELEVANCY SCORE 57.6

alright...i did a virus scan with Avast! Pro and then i looked at my task manager and the same amounts of one file keps on running...i went to terminate them...they were numbers.. like 1234.exe...then i got the bsod...i ran the Microsoft Degugging tools and here is what it found..

Microsoft ® Windows Debugger Version 6.8.0004.0 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini040608-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055a620
Debug session time: Sun Apr 6 14:56:48.984 2008 (GMT-4)
System Uptime: 0 days 3:04:04.529
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
........................................................................................................................................
Loading User Symbol... Read more

A:Blue Screen Of Death 2

You need to fix this before we can look at the debug information:*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exeBilly3

Read other 30 answers
RELEVANCY SCORE 57.6

Hey,Ive noticed ive been getting the BSOD at random times. Most times i wont even be on the computer, I'll walk in the room and it will be at a blue screen. The only thing that i have done recently is remove the Vitrumonde.dll spyware and update my BIOS to the newest version that was for my dell laptop (it was recommended by dell). I don't know what to do to fix it, but I can get all of the information on it, and my computer.This is the "Error Signature" when i click on the "More Details" link on the error window when Windows reboots.BCCode : 1000008e BCP1 : C0000005 BCP2 : 805B2F3D BCP3 : AE27EC38BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 768_1 These are the files that would have been included in the error report to microsoft:C:\DOCUME~1\Quinton\LOCALS~1\Temp\WER850f.dir00\Mini040308-02.dmpC:\DOCUME~1\Quinton\LOCALS~1\Temp\WER850f.dir00\sysdata.xmlMy hardware specs are located in the attachment

A:Blue Screen Of Death

It may be a driver issue. Check your devices in Device Manager (Start > Run > type "devmgmt.msc" (without the quotes) and press Enter). Look for any "!" or "X" symbols.

Read other 1 answers
RELEVANCY SCORE 57.6

Hello,

I have a friends computer, it all started when i just had to install the comodo firewall and antivirus, his pc was fine, until i did that stupid software installation, then the comodo firewall started telling me there was viruses on there, so i deleted them all, after that, i updated the spybot, after a reboot, thats when a weird error message said something like could not read memory or something like that, then rebooted again, and blue screen of death, so i tried to uninstall comodo, spybot, and reinstall the video drivers, good news is, now it comes up to login to which profile, click on any profile, after 5 minutes, it will go blue screen and reboot, i looked at the event log in system and said something like bugfix or something about it encountered a bug and need to be rebooted the pc, something like that, looked it up, and checked all hardware, I DONT KNOW WHAT TO DO NOW ANY IDEAS!!! should i just do a repair on windows XP pro since i have the CD? if so, will my friend lose his programs and files if i do a repair, his Windows is SP3, and my repair cd is SP2, will it be fine (the files and programs)?

friends PC spec:
MS-7376
500w power supply
320gig sata seagate
nvideo geforce 6800 gt
win xp pro sp3

tried to install comodo firewall+antivirus version: 3.8.65951.477

PLEASE ANY IDEAS ANYTHING, ohh i also go into safe mode, and that works fine, but boot up to regular windows blue screens after 5 minutes, tried to go to msconfig, disable everything on startup, sti... Read more

A:blue screen of death!!

Well, the first thing to do is not to panic. The computer might not be working, but it is fixable compared to your state of mind...

The next thing we need to know is the exact details of the BSOD. If you can supply any error codes, and any drivers/files that it might reference, that would be helpful.

It may indeed turn out that you need to do a repair install. Your friend's programs and files should stay intact, but it would be best if they had a backup of their files. If you can, take the hard drive out and connect it to another machine as a slave drive. That should allow you to copy files across with minimal worry over a BSOD.
 

Read other 3 answers
RELEVANCY SCORE 57.6

i really was not doing anything except for browsing the web on firefox and then my pc gave me a BSOD and here is what i got from the error consolEvent Type: ErrorEvent Source: System ErrorEvent Category: (102)Event ID: 1003Date: 3/25/2008Time: 10:35:55 PMUser: N/AComputer: JEFF-LAPTOPDescription:Error code 00000019, parameter1 00000020, parameter2 81f4d580, parameter3 81f4df80, parameter4 0b400002.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.Data:0000: 53 79 73 74 65 6d 20 45 System E0008: 72 72 6f 72 20 20 45 72 rror Er0010: 72 6f 72 20 63 6f 64 65 ror code0018: 20 30 30 30 30 30 30 31 00000010020: 39 20 20 50 61 72 61 6d 9 Param0028: 65 74 65 72 73 20 30 30 eters 000030: 30 30 30 30 32 30 2c 20 000020,0038: 38 31 66 34 64 35 38 30 81f4d5800040: 2c 20 38 31 66 34 64 66 , 81f4df0048: 38 30 2c 20 30 62 34 30 80, 0b400050: 30 30 30 32 0002what does this mean?

A:Blue Screen Of Death

Check your devices in Device Manager (Start > Run > type "devmgmt.msc" (without the quotes) and press Enter). Look for any "! " or "X" symbols.Also, try running chkdsk on your hard drive.

Read other 10 answers
RELEVANCY SCORE 57.6

I keep getting a BSOD with this message:

IRQL_Not_Less_Or_Equal

I have not actually found the culprit, but I know that the file that is giving the error ends in .sys

It only seems to happen when I'm on Facebook loading a flash game like Frontierville, or another kind of application, and at the same time loading another website in a tab.

Normally I can have a video on youtube buffering, Limewire in the background playing music, a game on windowed mode, and no problem, but as soon as you introduce a Facebook application into the mix, my screen goes pixelated and if music is playing in the background, it just loops and loops until it hits the BSOD.

I'm guessing it's something to do with flash, but I'd like an expert opinion on this.

Thanks for an replies!

A:Blue screen of Death.

Do you still need help with this issue?

Please provide this information: http://www.techsupportforum.com/f217...ns-452654.html

Forum rules prohibit helping with P2P applications - so I'd suggest uninstalling it before we start working on the issue.

Read other 1 answers
RELEVANCY SCORE 57.6

it crashes all the time what is that?

==================================================
Dump File : Mini030812-01.dmp
Crash Time : 8/3/2012 1:13:43 πμ
Bug Check String : BAD_POOL_HEADER
Bug Check Code : 0x00000019
Parameter 1 : 0x00000020
Parameter 2 : 0x85226658
Parameter 3 : 0x85226808
Parameter 4 : 0x08360009
Caused By Driver : ndis.sys
Caused By Address : ndis.sys+d913
File Description : NDIS 6.0 wrapper driver
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.0.6002.18005 (lh_sp2rtm.090410-1830)
Processor : 32-bit
Crash Address : ntkrnlpa.exe+cdb3f
Stack Address 1 : ntkrnlpa.exe+ed184
Stack Address 2 : ndis.sys+3f58
Stack Address 3 : ndis.sys+3320
Computer Name :
Full Path : C:\Windows\Minidump\Mini030812-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 6002
Dump File Size : 141.760

A:blue screen of death please help me!!

If you would be kind enough to supply us the following information, we will be able to help.

Read other 1 answers
RELEVANCY SCORE 57.6

i am experiancing a problem where my pc randomlly wil reboot and give me a blue screen error msg "ntfs.sys error PAGE_FAULT_IN_NONPAGED_AREA" any help would be appreciated. i know u wil prob. want a file data dump... if so, can u tell me how to go about uploading this info. ~thx
 

A:Blue screen of death :(

Read this first and let us know what steps you took. Your particular error can be caused by both hardware and software issues, particulary RAM, but other reasons can exist as well.

http://www.techspot.com/vb/topic51365.html
 

Read other 3 answers
RELEVANCY SCORE 57.6

Hi all... this may be a shot in the dark... but it's a shot. I currently have windows xp with service pack 2 installed on my desktop. It's been working perfectly, no problems at all, until a couple of days ago. I was trying to start my computer in safe mode... but as it was loading the drivers for safe mode it would stop and restart saying that windows did not start properly and have to restart to save my computer. I fished around in microsoft support and it said that safe mode does not work with usb device (which my explorer mouse is) so I attatched the serial connector... restarted again, and I got a notice in my task bar that a new device had been found... and then that the drivers were installed for that device. Then I tried to restart my pc in safe mode... and it gave me the blue screen of death... the IRQL_LESS_OR_EQUAL error and the stop error 0x0000000A (0xF79A4354, 0x000000FF, 0x00000001, 0x804FE811) which to my understanding has something to do with a piece of hardware being faulty or incompatible. So I figured it was the mouse... because that was the only thing that I changed that day as far as hardware goes. About a week ago I added two sticks of RAM but I had no problems with my system. I don't know what to do about this because my pc won't do anything now. I can't start it in safe mode... and I can't start it at all no matter what I try. I NEED HELP and if there is anyone out there who can give it it would be greatly appriciated... ... Read more

A:Blue Screen of Death

Please go to www.memtest.org, download the program and test your RAM.
This is something you should have done immediately after putting in new memory.
 

Read other 3 answers
RELEVANCY SCORE 57.6

when I turn my kids computer on it go to the eventual blue screen of death, the message I get is 0X00000024(0X0011902FE, 0XF898F814,0X898F510,0XF8366185)
PLEASE HELP ME I'm tried of kids using my computer.
 

A:Blue screen of death

0x24 errors can be due to many things that is either hardware or software related. Do the following.

1. Start Menu > Run > type in ChkDsk and hit okay.

2. Run a full harddrive diagnostics; you can get a free utility from your harddrive manufacturer. if you don't know the make of your harddrive you can download a wonderful little utility that is 100% free called SIW (just google). Install and let it run. On the left will be a column. Click on the Storage Devices icon. It will list the make of your HD.

3. After, not before, you've run your HD diagnostics and there are no errors then defrag your HD, not before.
 

Read other 2 answers
RELEVANCY SCORE 57.6

I have been a windows user since my intro to computers and I built a system about a yr ago with 2 300 gig hd's. I have XP pro on my #1 drive and recently did a trial with vista on the #2 drive both sata. I came across freespire and had always heard good things about Linux but had always been leary of going away from what i was familiar with in windows. I'd always been able to choose which OS i wanted to boot up in BIOS. Anyway, I formatted the drive that i had vista installed on by using the format option when right clicking on that drive in my computer. And without much research I burned a copy of the freespire iso and installed it on the #2 drive. My first problem came about when I couldn't boot to the XP OS any longer. Grub was defaulting to the freespire. In a near panic I decided to format the #2 drive again and see if I could then boot up XP
This didn't work either, as grub remained embedded in the system and all I could get was a black screen of columns of "grub". I then went googling for an answer and came up with the Gparted boot program. After running the gparted live cd I was still unable to boot into XP and continued to get the black screen of grub. In my desperation I decided to format drive #1 and reinstall XP. I got near the end of the reinstall of XP and when it did the final restart before completing that's when I got the first Stop error screen. After a couple times of trying to repair the installation, i've given up and ... Read more

A:Blue Screen Of Death

LOL, I know it's not funny to you, but I liked the part about the sledgehammer...I understand that feeling .My first impression...you've done so much that I have no clue how to undo...that I would simply say...strart over.I would delete every partition on the hard drive, write off whatever is installed if I had no backups (I keep backups)...and just take a second or two to figure out what I wanted to do and in what order.You seem to be reactive when you should be planning before acting.And...before I installed any sort of multi-boot, I would read up on the best way to do it, the order, etc.Then I would do it, slowly, with ease, because I don't like mysteries on my systems when I'm trying to get them to function.My best guess would be that your actions have somehow hosed various partitions, which is why I recommend treating them like trash.But, I don't know.In any case, there are lessons to be learned from this, I think.http://support.microsoft.com/kb/324103I don't know if you've dealt with STOP errors before...but they are just technical ways of saying "I've had enough!" The procedures for troubleshooting are further proof of that.I think you are way past the point of trying to repair a Windows install, you just need to write it off as a learning experience and start over.By the time you tried to check the various things that are on the troubleshooting procedure, you could easily have just started with a clean slate, did all the ... Read more

Read other 2 answers
RELEVANCY SCORE 57.6

I don't know why I continually get this blue screen of death. I attributed it to my children allowing my computer to continually die from leaving it unplugged. I will be on the computer and all the sudden it will freeze up then it will change over to the blue screen and eventually restart. can anyone tell me what causes this and how to fix it?
 

A:Blue Screen of Death

what does it say on the bsod screen

put the mini dumps into here and post the result

http://www.nirsoft.net/utils/blue_screen_view.html

C:\Windows\Minidump\Minidump.dmp

laptop or desktop

a desktop should not be left unplugged the cmos battery will go flat and cause all types of problems

is the time and date correct
 

Read other 1 answers
RELEVANCY SCORE 57.6

Last weekend I just fixed my computer at my friends house because he had the XP disk but now his computer is broken and the windows XP disk can't fix it! The error is "Unmountable Volume!" Can any body help because we tried the windows disk and swapping hard drives! Thank you .

A:Blue Screen Of Death!

Unmountable Boot Volume in Windows XP ( WINXP ) - http://www.windowsreinstall.com/install/wi...unmountable.htm Unmountable Boot Volume - http://support.microsoft.com/default.aspx?...kb;en-us;555302 Louis

Read other 2 answers
RELEVANCY SCORE 57.6

I just had a blue screen of death. I was able to recover, here is the line codes. A quick google search did not turn up anything. Just using my windows 7 as normal browsing the web and it just threw that blue screen up. Windows 7 home edition. Updates current. 64 bit. I have an AMD processor.

*** Stop: 0x000007E

*** ndis.sys Address FFFFF880014B8580

Base at FFFFF880014B7000

Datestamp 5034F6b2

Anyone knows what this means?

A:Blue screen of death.

Blue Screen of Death (BSOD) Posting Instructions

If you can't in normal mode, go to safe mode with networking: Safe Mode

Read other 9 answers
RELEVANCY SCORE 57.6

Hello.
I bought a computer from a computer builder, and now I have some problems. I can't get it to start. When I turn it on it goes directly to a black page where I get the options "Launch Startup Repair" or "Start Windows Normally". Both actions lead to the same Bluescreen, however if I choose the startup repair it gets stuck on the bluescreen, if I choose normal startup I get a quick (less than a second) image of the bluescreen before it reboots itself. 
This is the error I get:
 
I've tried resetting BIOS by taking out the battery, tried removing all the memory units, also tried booting it without the graphics card. The computer does not have a CD-reader or I could've tried booting from CD, and I dont have Windows 7 on a memory stick either.
 
I tried downloading Windows 7 from Pirate Bay, but I am not very tech savvy, although I can work my way around a computer I am not fully educated in this. So if someone can look past the obvious "its not legal so you shouldn't do it" and help me boot from a USB or something I'd be very grateful. 
Anyone have any suggestions of what I can do? The computer wont even start in Safe Mode. I tried and it loaded all the neccesary files, then started to load and went straight to bluescreen, again. 

Graphics Card: MSI N580GTX Twin Frozr ll
Motherboard: MSI Z77A-GD55
Powersupply: CFT-650-14CS
Harddrive: Samsung SP2504C
Memory Units: 4x Corsair 2GB DDR3
 

A:Blue Screen of Death

this is what I googled quickly I hope this helps
 
http://support.microsoft.com/kb/329293

Read other 6 answers
RELEVANCY SCORE 57.6

For some unknown reason I'm now getting the blue screen of death when I boot up my computer (a hp pavilion 760n that came with xp home edition, and which hides a portion of its 120gb hard drive for system recovery), but this is the first time it's missed up like this, since I put professional and I now want to go back to home since I no longer have a professional cd, but for some reason the f10 button that I've always used to bring up the recovery is not responding, and I was wondering if there were any other ways of getting to the backed up recovery files, Thank You in advance, and I hope I can fix this problem soon.
 

A:The BLUE SCREEN of Death!!

Read other 6 answers
RELEVANCY SCORE 57.6

hi there, i have seen lots of blue screens whilst playin world of warcraft.
it is usually IRQL_NOT_LESS_OR_EQUAL. i checked for solutions, updated drivers and even got a friend to run Ram test which said everything was fine.
however the game kept crashing, and then said i had corrupt game files.
when i tried to reinstall WOW, i got a message saying that there could be a problem with my C:/.
after putting in the CD, to see if WOW worked with it in the CD drive i got a message something like PFN_LIST_CORRUPT
i have also had windows messenger, steam freezes/stop responding and internet explorer doesnt work on my user - i am admin.
my setup is:-
intel q6600 CPU
XFX 8800GT alpha dog
2GB OCZ enhaned banwith PC6400
ASUS P5N32-E SLI
Windows Vista Ultimate
i have also had trouble with updates, but i think this is a microsoft problem and not just my PC.

any help/advice and i would be extremely grateful - hopefully no windows reinstall

btw i am a bit of a PC noob

cheer john
 

A:Blue Screen of Death :(

0x0000004E: PFN_LIST_CORRUPT -- This indicates that the memory management Page File Number list is corrupted. Can be caused by corrupt physical RAM, or by drivers passing bad memory descriptor lists.

* This error is a good indication that your issue is with corrupted memory.

Therefore, go to www.memtest.org and download their free utility that is used to test RAM. Either choose the floppy disk version or ISO to burn to a CD. After you get it on a floppy or CD...

1. Go into your BIOS which you can get to when you boot up and press the Del ket. If it gets to the Windows splash screen you will need to reboot and immediately start pressing the Del key.

2. Your BIOS screen will come up. Look for the boot sequence screen. You'll want to place either your floppy drive or your CD/DVD drive as first bootable. This means when the system starts up it can access where you placed MemTest.

3. Reboot with the floppy or CD already in place. The test will take over. This takes a long time and it needs to run through a minimum of 7 passes.

4. Any errors and you have RAM that needs to be replaced.

I also suggest you read the sticky here by Julio entitled "Before you post your minidumps..."
 

Read other 1 answers
RELEVANCY SCORE 57.6

I get the BSoD everytime I log on in any mode. This is what the screen reads.
A problem has been detected and windows has been shut down to prevent damage
If this is the first time youve seen this restart your computer if it reappears follow these steps
Check disc space if a driver is identified disable the driver, try changing video adapters.
Check for bios update, disable bios memory options such as cache or shadowing use safe mode
tech info *** STOP:0X0000008E (0xc0000005,0x805647d7,0xf81c2640,0x00000000)
Cant get into safe mode, no new hardware added, Thanks for any help. Dell laptop with xp installed
 

A:Blue Screen of death

Read other 12 answers
RELEVANCY SCORE 57.6

I am facing the same problem as joeturbo. It would be so helpful if you guys could help me out with this.I have attached the minidump files.Thanks in advance.

A:Blue Screen of Death

Hi -

Please follow these instructions --> BSOD Posting Instructions

Regards. . .

jcgriff2

.

Read other 3 answers
RELEVANCY SCORE 57.6

I've recently come across this problem. My computer froze up, so I did a hard restart (just holding down the power button until it turned off). The computer restarted and came to the loading screen. I let it sit there for about 10 minutes, and I received an error message. I restarted it again in safe mode and again received this error message.

***STOP: 0x00000024 (0x001902FE,0xF89C4B66,0xF89C4868,0xF83806D4)

Ntfs.sys - Address F83806D4 base at F836F000, Datestamp 45CC56a7***

any ideas on what i can do here?
 

A:Blue Screen Of Death

Read other 16 answers
RELEVANCY SCORE 57.6

Hi,Seems that many people are having BSOD.I have been having may BSOD since last few months. I got approximatly 4-5 BSOD in 2 months. This is how it happened, when I was running AVG 8.0 anti-virus while surfing on the internet all of a sudden the blue screen pops up saying something like: "the system needs to shut down to prevent damage, begginng dumping physical memory." Also every since I got the first BSOD, i've noticed that when I download something that is about 12mb it takes up like 100 mb from my C: drive, sometimes when I even download a small small small file that is only like 3mb it uses about 100mb from my C: Before I had 20.8GB, after I downloaded Ad-aware and Spybot S&D it decreased to 19.2 GB. Now it's 18.8 GB.I have read many topics regarding BSOD, and it still happens, but not occasionaly.Can someone help, also how do you copy the BSOD error code?? Regards,Extremeboy

A:Blue Screen Of Death

There are at least 2 ways to initially approach getting info on BSODs: a. If there is a printed message onscreen, write it down exactly as it appears. b. Lacking an onscreen message, users can try to trace BSOD info in Event Viewer.One thing that everyone probably ought to do on a system: Disable Auto Reboot On System Crash - http://www.theeldergeek.com/auto_reboot_on_system_crash.htm The reason? To give users a better chance at getting valuable data which may aid in troubleshooting system issues.If auto reboot is enabled, many times there will not necessarily be any documentation on what the error was, details, etc....because there wasn't sufficient time for XP's mechanism to record what happened (as opposed to rebooting). Disabling that provides XP a chance to document.Event Viewer is probably (IMO)...the most useful troubleshooting tool which XP has, since it will often provide info leading to ideas about what to do to resolve problems. But, if it's not used...users just wind up guessing or unable to guess what needs adjustment.Louis

Read other 26 answers
RELEVANCY SCORE 57.6

I don't really understand what's wrong. I recently updated my graphics card to a new one. I made sure everything is plugged in correctly and so forth. Hopefully, somebody could help me figure out my problem.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000099
BCP2: 0000000000067723
BCP3: 0000000000000002
BCP4: 00000000000BD522
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\072813-15085-01.dmp
C:\Users\Asterion\AppData\Local\Temp\WER-31371-0.sysdata.xml
 

A:Blue Screen of Death

Read other 10 answers
RELEVANCY SCORE 57.6

I have repeatedly gotten the blue screen saying a problem has been detected and windows has shut down to prevent damage to your computer. I am using windows 7 and I did a virus scan with AVG and got rid of a virus called root kits only to have it back during another virus scan. How do I fix the blue screen and get rid of the virus? I have already disabled the automatic reboot. Thanks!
 

A:Blue Screen of Death

you should have posted in the security section and asked for help cleaning the system

http://forums.techguy.org/virus-other-malware-removal/943214-everyone-must-read-before-posting.html
 

Read other 2 answers
RELEVANCY SCORE 57.6

Hi,

I built myself an expensive rig, and I am overclocking it. I've had the blue screen of death allot lately. I've always been able to figure out the problem, so there are no worries. All I'm wondering is if the BlueScreen will hurt your hardware or damage the code in the operating system, or is it just an incident that in no way affects the computer later?
 

Read other answers
RELEVANCY SCORE 57.6

I have a custom build computer that giving me the blue screen of death 5 min after I turned the computer on,i just paid some moron 150.00 to fix this issue but still happening.I had purchased all new parts for this computer just about.new hard drive mother board and memory cpu. new keyboard and mouse as well
am using my old graphics card which worked fine on my old computer with no issues.

this is the message I received today not sure this is much help.
Problem signature:



Problem Event Name: BlueScreen

OS Version: 6.1.7601.2.1.0.768.3

Locale ID: 1033

Additional information about the problem:



BCCode: 1e

BCP1: 0000000000000000

BCP2: 0000000000000000

BCP3: 0000000000000000

BCP4: 0000000000000000

OS Version: 6_1_7601

Service Pack: 1_0

Product: 768_1
Files that help describe the problem:



C:\Windows\Minidump\071913-21918-01.dmp

C:\Users\Owner\AppData\Local\Temp\WER-38625-0.sysdata.xml

 

A:blue screen of death

Hi cindyc1974, Welcome to TSG.

Please go to C:\Windows\Minidump and copy the minidump folder to the desktop. Compress it and upload it here. HOW TO: Click Go Advanced /Scroll down to Manage Attachments, Browse to the compressed file and upload.
 

Read other 1 answers
RELEVANCY SCORE 57.6

First time I am seeing the BSoD, system specs are in profile, uploaded Reports.
I installed Teamspeak 3 and was playing Bad company 2, have no problems with any other games. It did this to me 3 times in a row.

No overclocking, temps are fine, Ive run a CHKDSK /R everything is good to go and was about to run a memcheck but I don't have the time right now.

Correct me if I am wrong but if it was the memory shouldnt I be seeing this at random times, even when idle, and not just in this one instance?

If I forgot anything let me know.

Any help would be great, thanks ahead of time.

A:Blue screen of death

Hi,

All your dump files point to 0x124 error, it usually related to hardware error but can also caused by 3rd driver.
I suggest you to uninstall Gigabyte EasyTune6 driver because it have some issues with Windows 7.

Code:
GVTDrv64.sys Mon Sep 04 23:10:02 2006
If the problem persist, then follow this troubleshooting steps:
Stop 0x124 - what it means and what to try

Also I notice that several crash related to PnkBstrB.exe which the problem can be related to BC2 server.
http://www.sevenforums.com/crashes-d...ing-bfbc2.html
Log:

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03041e50
Debug session time: Sat Apr 23 19:05:30.234 2011 (GMT-8)
System Uptime: 0 days 0:12:17.264
Loading Kernel Symbols
...............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********************************************************... Read more

Read other 3 answers
RELEVANCY SCORE 57.6

Hey i was told by my friend who is having the same problem that i have the blue sceen of death, i restart my computer and it loads the windows xp part then it showed up with a blue screen for like a split second and restarts. lately it hasnt been doing it but im typing this in safe mode atm its the only way i can as it auto reboots wen im in windows for like a min plz help heres my hijackthis log file
 

A:Blue screen of death PLZ! help

Read other 7 answers
RELEVANCY SCORE 57.6

Hello everyone. I new to this whole BSOD thing. I just recently purchased a brand new Sony Vaio Laptop with Vista loaded on it...well its been less than a week and i'm already getting BSOD alot. I get the following message once the laptops restarts:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C042E138
BCP2: C0000185
BCP3: 0619D8C0
BCP4: 85C273D3
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini021008-10.dmp
Click to expand...

I've also attached a zip file with the last three dump files... please help
 

A:Blue Screen of Death!!!!

From the looks of your minidumps I'm thinking you have a problem either with bad ram or your hard disk or its controllers

One dump indicates "memory corruption"; another shows the faulting module as "ataport.sys"

Another is a core system driver "win32k.sys" which can be caused just about by anything, but the STOP type is 7A, which is discussed here and looks also like a drive issue >> http://msdn2.microsoft.com/en-gb/library/ms793989.aspx

BugCheck 7A, {92c037d0, c0000185, 2ba05864, 936f426c}

Unable to load image \SystemRoot\System32\win32k.sys, Win32 error 2Click to expand...
>> 0xC0000185, or STATUS_IO_DEVICE_ERROR, is caused by improper termination or defective cabling on SCSI devices, or two devices attempting to use the same IRQ.
To test the ram run mdsched.exe read the additional info and run the extended tests.

Also, run eventvwr.msc and look at the Windows > system log for NTFS, atapi, or volsnap errors which indicate drive problems.

If you cannot resolve the problem yourself, contact the computer vendor and start talking about warranty support.

It's possible the drive is not making good contact inside the case.
 

Read other 1 answers
RELEVANCY SCORE 57.6

We just got done cleaning up my computer extensively but now I'm getting memory dumps all the time. I might be just converting a avi file to dvd or playing an old game and it will freeze up and go to a blue screen explaining the memory dump. Can you help.

A:Blue Screen Of Death

Error message specifics?

Louis

Read other 17 answers
RELEVANCY SCORE 57.6

Brand new unit out the boxJust after set up blue screen crashes and resets8 times nowSays Windows did not install

A:Blue screen death on new PC

Hi RustyBucket,  Sorry this happened to you. If it were me, there are two things I would do: 1) Try to run a full recovery from the Hard Drive. You can access the Recovery options before the PC boots to Windows. Here are instructions for this:http://support.hp.com/us-en/product/HP-22-b000-All-in-One-Desktop-PC-series/10734597/model/11875100/... 2) If Recovery doesn't work, I would take it back to the store where I got to see if I could get a replacement. Or I would contact HP to have them repair the PC. This option would take the time to ship it to HP though and have them send it back.

Read other 2 answers