Over 1 million tech questions and answers.

Driver USB Serial converter - Windows 10 1803

Q: Driver USB Serial converter - Windows 10 1803

Hello, I can't find the driver for "USB Serial Converter" (USB to serial / Port COM) for the T480s (20L8)The system is Windows 10 64Bits - 1803 Thank you in advance, Regards

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Driver USB Serial converter - Windows 10 1803

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 76

Do you have any idea where could i find drivers for an USB to serial converter... i bought a generic converter with no brand so i don't know where to look...

any ideas...?

thanks

AP
 

A:USB to serial converter driver for win xp

Read other 7 answers
RELEVANCY SCORE 61.2

Windows 10 Home Version 1803 up to date, Lenovo M57 PC Intel Duo Core E6750 2.66 GHz, 3 Gb RAM, 32 bit Had two sessions with Microsoft tech support for a problem which first became obvious in Windows Live Mail. The main page of the app does not format correctly, and has some text reflected vertically from the end of strings and other errors of things misplaced. I later found some errors in browsers. MS Tech Support removed the virtual device for display and the current driver. The first person left me with the original problem without finalizing the chat session after trying several fixes. The second person removed the virtual device and replaced it with generic 2006 MS display adapter support. My resolution is now 1280x1024 on a monitor which is normally at 1920x1080. Things are able to be read, but the resolution is not in proportion. In Device Manager, Display Adapter now says Microsoft Basic Display Adapter, but the actual on board adapter is from Intel. The driver used is from 2006, and does not offer recommended resolution for the monitor. How do I use the actual Intel graphics adapter and get a driver for the current version of W10 that will display correctly?

Read other answers
RELEVANCY SCORE 61.2

Hi, after upgrading to Win 10 1803 webcam disappeared even from the device manager. I am struggling to find the webcam driver in Toshiba's website. Could you please tell me where to download it from? Thanks

Read other answers
RELEVANCY SCORE 60.4

  Hello there

I am using Windows 10. I made a Windows update. The version of the 1803 OS has been disabled after I updated the 17133.1 version. I downloaded and did not download the driver for the graphics card from Lenovo Support. He's making trouble. I also downloaded the latest driver from Intel support, which is incompatible with this version of Windows. How we can solve this problem ? 

Read other answers
RELEVANCY SCORE 59.6

Hi there,
Our replacement HP computer doesn't have a parallel port which we need to connect our computer to holiday park's security barrier arm.  We have re-connected it through an Aten USB-to-Serial (RS-232a) Converter and installed the software.
We can see it listed in the Device Manager, but it's telling us:
    Currently, this hardware device is not connected to the computer. (Code 45)
    To fix this problem, reconnect this hardware device to the computer.
How can we get this connected please?  We need to operate the security barrier arm!
Thank you,
Shelly and Julian (owners)

Read other answers
RELEVANCY SCORE 59.6

Hi all, I have a Suunto dive computer that's designed to download data to a PC software program called Suunto Dive Manager. The dive computer attaches to the PC via a hardware adapter designed to plug into a serial port. Under Windows XP, I used a USB-to-serial converter to be able to attach this adapter to a newer laptop via one of its USB ports. The Suunto software and the USB-to-serial converter are both a few years old.

Today I installed the Suunto Dive Manager software on my Windows 7 laptop. The software seems to basically run okay under Windows 7; however, when the USB-to-serial converter is attached to the laptop, the Suunto Dive Manager software reports that it finds no serial ports on the PC.

Are there known issues and fixes for using USB-to-serial converters under Windows 7? Thanks for any ideas.

A:USB-to-serial converter

Have a look at these links, and see if it applies. It's a bit archane for my experience

Suunto Dive Manager and Windows 7 [Archive] - ScubaBoard

USB/serial adapter for Suunto dive manager

I think this is more specific to the Suunto Dive Manage. Lots of possible help if you Google

Suunto Dive Manager USB-to-serial converters under Windows 7

A Guy

Read other 6 answers
RELEVANCY SCORE 59.6

I would prefer not to keep taking the Smartmedia card in and out of my Fuji MX-1700 camera to put into a card reader and I wanted to know what results I would get by hooking the serial lead into a Serial/USB converter. Everything depends on what speed the camera is capable of pushing data out of its serial port and that's what I would like to know.
 

A:Serial to USB Converter

Read other 7 answers
RELEVANCY SCORE 58.8

UPS & serial to USB converter

I have purchased a Belkin UPS which uses a serial port to connect to my computer.

I only have 1 serial port which is in use.

I did purchase a "USB to Serial " adapter since I do have two available USB ports.

However, my computer recognized I had new hardware but can not "see" the USB port and says it can't find software to install "USB to serial converter".

I assume I could buy another serial card if I have the space.

Any other suggestions?
 

A:[Solved] UPS & serial to USB converter

Read other 6 answers
RELEVANCY SCORE 58.8

I used a usb to serial port converter in my Toshiba Satellite laptop (donīt have a serial port), Windows Vista recognize it as a device and ready to use it. WHen I connceted a device with a null modem serial cable, it doesnīt work.

What will be the problem and its solution if any?

Thanks
 

A:usb to serial converter problem

Read other 7 answers
RELEVANCY SCORE 58.8

Hi all

I have a USB<->serial converter (several, actually) that I cannot get to work under Windows 7. I know the hardware works.

When I try to open the virtual serial port in a terminal program, I get an error message stating that it cannot open the port. When I try to use the old-fashioned command line method ("copy test.txt com7" from the "DOS prompt"), I get an "Access denied" error message.
Any ideas what the problem can be? I suspect it is some kind of access rights issue. But I need help finding it.
More details:
My computer is a dual-boot Windows 7 Ultimate 64-bit / Windows XP Pro 32-bit system. The USB serial converter worked immediately under WinXP when I rebooted, and it even works in the WinXP virtual machine under Windows 7. I have the latest certified drivers (from FTDI), which are stated to function under Win7 64-bit.

The serial converter appears as it should in the Device manager.

My computer has one physical COM port, and I can access that one without any problems.

The serial converter is a USB-RS485-WE-1800-BT from FTDI. I have tried a USB<->RS232 converter (don't have the model number here), but it behaved exactly like the other one. I also started the terminal program as an adminstrator (since I suspected access rights issues), but it did not help.

I have tried uninstalling the drivers, then installing the latest certified driver and the even later non-certified driver, but still had the same behaviour.

... Read more

A:Cannot access USB serial converter

... I can add that I also started the terminal program in XP compatibility mode, with administator's rights, but it behaved as it did before.

Read other 3 answers
RELEVANCY SCORE 58.8

I have been given a usb to serail converter to run a AMB timming loop.
My pc doesnt recognise the converter. there is no make on it or in it.(did have a look)
It comes up in device manager as USB serial controller. if i go into properties it's ID is
usb\vid_067b&pid_2303\5&285de58c&0&2
I'm running windows XP fully updated
Can anyone help time is of the essence.
need to find it's driver
 

A:Solved: usb to serial converter please help

It uses a chip made by Prolific Technology: http://www.prolific.com.tw/eng/downloads.asp?ID=31

This driver should work for XP: PL2303_Driver_XP2K_v204102.zip or this one PL2303_XP2KME98Driver_Setup.zip
 

Read other 1 answers
RELEVANCY SCORE 58.4

I have a program that collects data via a serial port. Now the port went faulty and it was replaced by one of these USB to serial converters without my knowledge. It would appear that it now loses data at times. On testing it would appear that if the data is being sent at the exact same time as the USB mouse is being used the data is lost. I found this out by continuously moving the mouse and sending data at the same time. This is a Logitech mouse. This is now running on an XP Box but now if I upgrade to Win 7 I am thinking I will have the same issues. Any thoughts on this

Now this part is just for info but also concerning a logitech mouse. The program also uses a USB Dongle and I also found on another system the dongle was shutting down and giving a dongle error on the program. On this setup they had a PS2 to USB mouse converter running a logitech USB mouse. Also when you move the mouse around the dongle shuts down. I can actually see this by the dongle light going out. (I am not worried about this one I just thought I would mention it)

A:USB to Serial Converter - Losing Data

Not to worry about this I found the information I needed USB to RS232 converters

Read other 1 answers
RELEVANCY SCORE 57.6

Can anyone advise please
I am using pentium3 but bespoke software ONLY using DOS 3.1 (I think) I need to use LPT1 but want to use a parallel to serial converter for onward transmission to another building across a fibre mux link. The serial link needs flow control in case printer off line or link down. Recommend a converter?? but How does the status (presumably CTS) get back to LPT1 ?? or is this done automatically in the converter?
Thankyou
 

A:Parallel-Serial converter/flow control

I think that all the signals are controlled by the converter...

You can check this site for the converter and some more details...
http://www.rad.com/products/family/mic-psx/mic-psx.htm
 

Read other 1 answers
RELEVANCY SCORE 55.2

Hello guys,

i just hav a problem with this HL 340 usb 2 serial converter drivers for windows 7 - 32 bit.can you send me a link....

A:HL 340 usb 2 serial con. driver for windows 7 - 32 bit

vista driver for usb to serial cable hl-340 Download ? Full Software Downloads - Download For All
here you go

Read other 4 answers
RELEVANCY SCORE 54.8

Hello! I used DBAN to wipe hard drive for fresh reinstallation of Windows 10. It recognized all other drivers except the PCI Serial Port. Desktop model is VW202ET.  How do I go from here? Not sure of the name for the driver though unless I'm required to open up the computer, then I'll do that if need be. Thanks!

A:PCI Serial Port Driver Windows 10

AlluraBlue Hello;Allow me to welcome you to the HP forums! I wish I had good news for you -- but I don't ... HP does not provide Win10 drivers for your model PC, so basically, you should NOT have forced an installation of Win10 because HP does not have the drivers needed to ensure full operation of all the hardware that came with your PC. Your best option is to return your PC to its original OS version, that way, you will be able to continue to use all its features.

Read other 1 answers
RELEVANCY SCORE 54.8

Hi,

Can anyone please help me, I have just tried to install the prolific USB-Serial COM PORT Driver Windows 7 Home 64 bit to connect my Garmin summit.

As hard as I have tried I cannot find a driver that works, I am using a PFRANC data cable that worked with my XP Pro PC with out any problems.

I have updated my windows drivers.

Can anyone suggest a working driver.

cheers

A:USB-Serial COM PORT Driver Windows 7 64 bit

Hello hobie21, welcome to the forum
Is this any help? Welcome to Prolific

Read other 1 answers
RELEVANCY SCORE 54

Hi all, I have performed a fresh install of Windows 10 64-bit pro on a HP 6200 pro small form factor. I am unable to locate the driver for the PCI Serial Port, hardware ID  PCI\VEN_8086&DEV_1C3D&SUBSYS_1497103C&REV_04 Any help would be greatly appreciated.

A:Windows 10 PCI Serial Port driver for HP 6200 Pro SFF

Hi: You should be able to use the W7 driver... Intel(R) AMT LMS_SOL http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5037902&swItemId=vc_138955_1&swEnvOid=405...

Read other 5 answers
RELEVANCY SCORE 54

Hello,
Several RS232 devices are having difficulties functioning on Windows 7. They worked fine on XP.
On XP they used the serenum.sys and serial.sys files as a driver. But, on Windows 7 they use the same files, but these files are 6.0. And not 5.0 anymore.
Even when I adjust the baudrate settings, etc., the devices still don't work. Could it be that these devices are too old to be used on Windows 7? Is there a way to verify this?
Dispite the difference in version number of the two files, is there a way to bypass this? And how can I check if my COM1 port is alive?
Thanks in advance.
Yours sincerely,
Hasan

Read other answers
RELEVANCY SCORE 54

I just purchased a refurbished HP Desktop from the city and they installed Windows 7 PRO, which is 64 bits, instead of the original OS which was Windows XP PRO. The model is a DC7800. All I need is the PCI Serial Port Driver. Any suggestions?

A:HP DC7800 Windows 7 x64 PCI Serial Part Driver

Drivers
Drivers & software for HP Compaq dc7800 Convertible Minitower PC - HP Support Center

Read other 1 answers
RELEVANCY SCORE 54

Hi Im trying to help a friend, he has a missing PCI serial port in device manager It shows this along with 2 other lines PCI\VEN_8086&DEV_1C3D&SUBSYS_307717AA&REV_04

A:Missing PCI serial port driver windows 10 x64

Hi,
 
See below post.  Its serial over LAN device and part of AMT.
 
https://forums.lenovo.com/t5/ThinkStation-Workstations/Missing-PCI-Serial-Port-Driver-Windows-10-S30...

Read other 1 answers
RELEVANCY SCORE 54

Ever since I installed Windows 7 (64-bit), the Device Manager shows under Other Devices / PCI Serial Port / Properties / "The drivers for this device are not installed. (Code 28)".

I've update the drivers for my main-board (ALiveNF6G-GLAN) with the files from here and for my graphics card (GeForce 6150SE) and chip-set (nForce 430) (v15.49) from here, but the PCI Serial Port driver is still reported as not installed.

Deleting the device (and letting Windows re-detect it) doesn't work either.

I'm really frustrated by this problem because I suspect it might be the cause the Windows doesn't enter Sleep/Hibernate mode correctly (e.g., the CPU fan keeps running).

Any help would be greatly appreciated!

PS. Please ignore the system specs below this post. Those are for my PC. This problem is on my wife's PC.

A:PCI Serial Port driver not installed (Windows 7 64-bit)

Taka a look at page 43 of the manual, how to disable Serial Port.
You can download the manual from your link.

Read other 2 answers
RELEVANCY SCORE 53.6

I am a Thinkpad P1 Gen 1 user. Lenovo Vantage notified me to update the trackpad driver which is not available at the corresponding Lenono Support webpage yet. Once I updated to this driver, it paralyed the trackpad and forced me to roll back to previous driver version to solve the issue. Guys, did you encounter the same issue? For Lenono Support, how come it seems you roll out drivers again that has not been thoroughly tested? 

Read other answers
RELEVANCY SCORE 53.6

Due to old software compatibility issues, I have to run Win XP on my HP Compaq 6000 Pro AT492AV computer.  I installed a fresh OEM copy of XP and have solved all driver problems except 2: 1) PCI Serial Port, here's info from the device manager: PCI Serial Port PCI bus 0, device 3, function 3 PCI\VEN_8086&DEV_2E17&SUBSYS_3048103C&REV_03PCI\VEN_8086&DEV_2E17&SUBSYS_3048103CPCI\VEN_8086&DEV_2E17&CC_070002PCI\VEN_8086&DEV_2E17&CC_0700 2) Unknown Device, here's info from the device manager: Intel(R) ICH10D LPC Interface Controller - 3A1A ACPI\IFX0102*IFX0102 I would appreciate any help you can provide! All the best

Read other answers
RELEVANCY SCORE 53.6

After Upgrade from W8.1 Pro to W10 Pro 64 bit, the correct driver of: "PCI\VEN_8086&DEV_1D3D&SUBSYS_1589103C&REV_05\3&11583659&0&B3" (Serial PCI Connector) is missing (not available). If anybody could help ant tell me were to find the needed driver i would be glad. Many ThanksHeinz

A:hp z420 windows 10 missing driver, serial pci connection

Yes, please advise. I'm having the same issue. Same hardware same OS.

Read other 2 answers
RELEVANCY SCORE 52.8

Hi, 

I recently acquired an Optiplex 790 with an i5 2400 3.1GHz processor, 8GB of ram, a PNY 125GB SSD. and a Hitachi 1TB HDD. 
I installed a clean copy of windows 10 on it and all went well except the PCIe Slots wouldn't recognize my TV tuner card. 
After a looking into it I found the that the PCI Serial Port driver is missing and that this may be the most likely cause of my issue. 
To fix it I took the following steps:
1. Downloaded and intstalled the latest chipset drivers from the DELL website. These drivers are labelled for windows 10 use 
2. Down loaded this driver DRVR_WIN_R296702.EXE for the foxconn PCIe add in card driver.
3. Reinstalled windows 10 to see if the drivers would automatically update. 
Unfortunately none of that worked, the only other option i see is to possibly run the fox conn driver install in compatibility mode, but I worry that it won't work. 
Another possiblity is to install windows 7 install all the needed drivers, then install windows 10 over top to see if that fixes it. Or leave widows 7 as is. 
Has anyone else experienced this problem and resolved it? If so how? 
Has anyone been able to upgrade fully without issue? 

A:Optiplex 790 PCI Serial Port Driver Missing after Windows 10 Upgrade

That driver is not foxconn.
It is also likely that you need to install CHIPSET drivers before PCI or PCI-E devices are "seen". Note that WT64 is WINDOWS 10


Description
Supported OS
Download
Intel Management Engine 7.1 Components InstallerThis package provides the Intel Management Engine 7.1 Components Installer and is supported on the Precision, OptiPlex and Latitude models that are running the following Windows Operating Systems: XP, Windows 7, Windows 8 and Windows 10.More details
Windows 7 32-bit Windows 7 64-bit Windows 8 32-bit Windows 8 64-bit Windows XP Windows XP x64 WT64A WT32A

NEC USB 3.0 DriverThis package provides the NEC USB 3.0 Driver and is supported on OptiPlex, Precision and Latitude models that are running the following Windows Operating Systems: XP, Vista (32/64-bit) and Windows 7 (32/64-bit).More details
Windows 7 32-bit Windows Vista 64-bit Windows XP Windows Vista 32-bit Windows XP x64 Windows 7 64-bit

Intel Chipset DriverThis package provides the Intel Chipset Driver and is supported on OptiPlex, Latitude and Precision models that are running the following Windows Operating Systems: XP, Vista (32/64-bit) and Windows 7 (32/64-bit).More details
Windows 7 64-bit Windows 7 32-bit Windows Vista 64-bit Windows XP Windows XP x64 Windows Vista 32-bit


 
 

Driver
SUN1999Driver V8.2.0.0 (WHQL) with inf - 20151208

Version
Ver 8.2.0.0
Update
2016-03-18 09:38:47
Size
4.8MB
OS

Windows 10 32/64 bit
Windows 8.1 32/64 b... Read more

Read other 1 answers
RELEVANCY SCORE 52.4

HiI have downloaded the Yoga x380 Win10 x64 1803Link for download:https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-... I need the SCCM package for 1803, after I download it keeps saying the file is corrupted. I am going under "Enterprise Management" --> SCCM Package for Windows 10 --> "SCCM package for Windows 10 64-bit (1803)".   1709 and 1703 work just fine. How do I get version 1803 of these drivers?

Read other answers
RELEVANCY SCORE 52

While imaging L590 / L490 using SCCM  using the Win10 1803  driver pack - https://download.lenovo.com/pccbbs/mobiles/tp_l490_l590_w1064_1803_201908.exe Missing Driver ACPI\INT34BB\3&11583659&0 Win10 1803 build Reached out to the Lenovo Technical Advisor for our organization, after a bit of research, it was found that this device appears to be the Intel Serial I/O ? Intel Serial I/O Driver R0ZLJ01W 30.100.1727.1 What is weird, is that the above EXE installs the needed driver, C:\DRIVERS\SCCM\TP_L490_L590_W1064_1803\Port\R0ZLJ01Wbut the EXE won't extract it - but if you manually point to this directory it will install.

Read other answers
RELEVANCY SCORE 52

those tow device show error in my pc and im not able to update those two driver here is the ID'S FOR IT PCI\VEN_8086&DEV_1C3D&SUBSYS_21DA17AA&REV_04PCI\VEN_8086&DEV_1C3D&SUBSYS_21DA17AAPCI\VEN_8086&DEV_1C3D&CC_070002PCI\VEN_8086&DEV_1C3D&CC_0700 SEYSTEM BASE DEVICE PCI\VEN_1180&DEV_E823&SUBSYS_21DA17AA&REV_04PCI\VEN_1180&DEV_E823&SUBSYS_21DA17AAPCI\VEN_1180&DEV_E823&CC_088001PCI\VEN_1180&DEV_E823&CC_0880

Read other answers
RELEVANCY SCORE 51.2

Windows 10 Home Version 1803 up to date, Lenovo M57 PC Intel Duo Core E6750 2.66 GHz, 3 Gb RAM, 32 bit
 
Had two sessions with Microsoft tech support for a problem which first became obvious in Windows Live Mail. The main page of the app does not format correctly, and has some text reflected vertically from the end of strings and other errors of things misplaced. I later found some errors in browsers. MS Tech Support removed the virtual device for display and the current driver. The first person left me with the original problem without finalizing the chat session after trying several fixes. The second person removed the virtual device and replaced it with generic 2006 MS display adapter support. My resolution is now 1280x1024 on a monitor which is normally at 1920x1080. Things are able to be read, but the resolution is not in proportion.
 
In Device Manager, Display Adapter now says Microsoft Basic Display Adapter, but the actual on board adapter is from Intel. The driver used is from 2006, and does not offer recommended resolution for the monitor.
 
How do I use the actual Intel graphics adapter and get a driver for the current version of W10 that will display correctly?
 
Mod:  edited Subject line to add system type and expand problem description













Solved!

Go to Solution.

A:M57: Graphics Device Driver Error After Recent Win 10 Update 1803 (Solved: install GT 710)

@bobbear43 wrote:
Windows 10 Home Version 1803 up to date, Lenovo M57 PC Intel Duo Core E6750 2.66 GHz, 3 Gb RAM, 32 bit
 
How do I use the actual Intel graphics adapter and get a driver for the current version of W10 that will display correctly?

There is not a graphics driver for that version of Win 10, or any version of Win 10.  Your Intel processor / graphics processor is not supported by Intel for Win 10, is several generations earlier than Win 10 is supported (Ivy Bridge.)  One option is to install a graphics card that will have Win 10 driver.  Since your system has PCIe 1.1, you should install a card that has PCIe 2.0, and not the current 3.0 (which can have compatibility issues with 1.1.)
 

Read other 6 answers
RELEVANCY SCORE 50.4

Hi.  I had some problem finding the right driver for windows 10.  The Hardware Ids: PCI\VEN_8086&DEV_3B67&SUBSYS_216217AA&REV_06  I found legacy driver for T410 - itīs for windows 8 64bit, but work for windows 10 64bit.  Location here: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6irb03ww.exe

A:T 410 pci serial port driver - missing driver win10 64bit. Intel Management Engine Interface 6.2

Here is the picture of the driver updated

Read other 1 answers
RELEVANCY SCORE 47.2

I have a epson action laser plus and the only drivers available are for a mac. Is there a convertor or/and software to make it work on a windows xp system from the mac drivers. I got the printer to work off of a old pentium III 800 w/98se software years ago. But it only print documents, etc. no internet printing.
 

A:Printer driver converter

no, there is no graceful way to convert. your best bet is to use a driver model comparable to the model that you have. you may experience problems similar to the ones you are listing now. (ie limited printing capabilities, no advanced functions, inaccurate printing.)
 

Read other 4 answers
RELEVANCY SCORE 47.2

Recently i bought a new computer windows 7 ultimate computer and i prevously owned 2 other computers that i stoped using. so i took them apart for parts and i was going to add both there older IDE hard drives to my newer computer. well i was looking on ebay and i cannot figure out what to purchase and i was wondering what i would need to convert an IDE hard drive to a SATA.

I have already bought a converter which i don't think is the correct type and the link to what it looks like will be right bellow.

http://cgi.ebay.com/3-5-SATA-Serial...817?pt=LH_DefaultDomain_0&hash=item19c33f2921

Thanks for the help guys
 

A:Hard Driver converter help

Can you included your new computer specs, Make and exact model number if Big Box (Dell, HP/Compaq, etc....) or Make and exact model of the motherboard if custom built.

If your new computer doesn't have an IDE Connector on the motherboard, or is in use by the optical drive, the item you linked to may work, Never used one before myself. Or you can get something like this http://www.newegg.com/Product/Produ...de_controller_card_pci-_-15-104-214-_-Product which will add 2 IDE ports enabling up to 4 IDE Drives to be added.
 

Read other 3 answers
RELEVANCY SCORE 46.8

Have deleted .dll files in Windows. Printer spooling hanging up. Done much web search to ferret an answer to no avail. Advice appreciated.
 

A:Can not delete driver - Amyuni PDF Converter 2.07

Read other 14 answers
RELEVANCY SCORE 46.8

I have just bought this IrDa MA-660 and when i insert it into computer, it asks for Usb to Serial driver but unfortunately this driver is not included on the installation cd. i have tried to such for it on the net but in vain. Please help me and give a hint concerning this driver.
 

A:Need Usb to Serial driver

Read other 6 answers
RELEVANCY SCORE 46.8

I have just bought this IrDa MA-660 and when i insert it into computer, it asks for Usb to Serial driver but unfortunately this driver is not included on the installation cd. i have tried to such for it on the net but in vain. Please help me and give a hint concerning this driver.
 

A:Need Usb to Serial driver

Closing duplicate thread too: http://forums.techguy.org/windows-nt-2000-xp/672375-need-usb-serial-driver.html
 

Read other 1 answers
RELEVANCY SCORE 46.8

hi,im running vista 64 home edition and having big problems with the drivers,the disk that came the cable have 64 bit drivers but they wont work as they are not digitally signed,i have been to the manufactures website"bafo" with no success and they dont even have a contact us section,so i tried the net with no success either so i am here looking for help,thanx in advance clint. Product Information

Read other answers
RELEVANCY SCORE 46.8

Hi,
I bought a USB to Serial adapter so that I can plug in my Garmin Forerunner 201 (only has a serial connector) to my new computer (doesn't have a serial port).
So I bought this kind of nondescript adapter online, and it arrived without any drivers. I thought all USB-to-serial drivers would be the same - but apparently not! I googled for drivers, found 1,001 different drivers available, and the 2 or 3 that I downloaded did not work.
How do I go about finding the right driver?
Thanks!
Shaul
 

A:Need a USB to Serial driver

Read other 8 answers
RELEVANCY SCORE 46.8

I am using windows 7 and I have a Radio Shack USB to serial cable that I cant get it reconized no matter what I do. Even the disk that came with it does not help. Any suggestions? I need this very much as it operates my embrodiery machine.

Thank Y
 

A:USb to serial driver

If it's this one there is no Windows 7 driver. Try the Vista driver; right click on the downloaded file, select Troubleshoot compatibility, and tell it that it worked in Vista SP2. Try other choices if that doesn't work.
 

Read other 2 answers
RELEVANCY SCORE 46.8

Hi all
i developed a usb2ser.sys on windows platform (kmdf) which will show USb port as a COM port to the PC and can work with serial port application in PC.
now i got into the trouble about Read opreation with some applications.
why i mentioned "some" becz my driver is perfectly works with the app if it is implemented in the way that Readfile win32 api is calling in a thread n it gets the data if device sends..
but some application are in diffway that when ever readbuffer is full then device drver can configure the devicecotroll er to geneate a siganl to the CPU called an interrupt request...application watch this n calls read operation..if it's the case i was failuring about read operation..
am i right about what i explained cause of failure about read operation?
can any one tell me how to give an interrupt to the PC from driver when i need..
how can i show to the application there is an interrupt if it checks..
if any tell me code abouthis in KMDf it would be appreciated

Read other answers
RELEVANCY SCORE 46.8

HI! Please please please could someone help...

We've just received our new Acer PC - has Win 7 Professional (32 bit) installed on it - we've upgraded to Prof as we need the XP bit to run our navigation software (MaxSea) which I've not even got as far as loading because I sinply cannot seem to load/locate the correct driver for our Radio Shack USB-Serial (RS232) adapter for our GPS. It was so easy in Win XP... but Win 7 is rather different, and I'm not sure if it's me or if it's Win 7!!

I've tried the Prolific site as well as usbfirewire.com, I'm pretty sure I have the right driver, but I don't know what I'm doing wrong when I'm installing it....

Thanks in advance!!!

A:Help! Usb-serial driver

Hi indigo356,welcome to the forums, have a look at these drivers USB Adapter USB Serial Adapter Driver Page and if you have the original driver disc ,install them in compatibility mode Compatibility Mode the Vista drivers will work on win7 in compat mode

Read other 3 answers
RELEVANCY SCORE 46.8

Installed the WIndow 1803 update and it doest see my 2nd monitor.  The bad part about this is that I did a clean install and it automagically goes out to MS and installs 1803 without my consent. I want the previous version on my computer, but I cant seem to prevent them from updating during the process. I installed the newest drivers manually and it didnt help.This is really frustrating and MS was not any help. HELP !!!

Read other answers
RELEVANCY SCORE 46.8

I've been trying for weeks to upgrade to Windows 10 1803, it always rolls back at about 32% Today I tried a clean install of 1803 from a USB stick. It installed just fine, but then it started installing drivers for unknown devices and after installing the Intel HD driver for the video card the system became unstable with a PAGE FAULT IN NONPAGED AREA bluescreen crashing the machine after booting up. It would appear the problem may be with the Intel HD Graphics driver which hasn't been updated in some time. Anyone managed to get 1803 running successfully on B50-30? Thanks

Read other answers
RELEVANCY SCORE 46.8