Over 1 million tech questions and answers.

BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

Q: BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

Hello All,

I believe the problem is the result of ntoskrnl.exe because WhoCrashed crash dump analysis says...

This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE

although occasionally it is....

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE


? Win 7 Pro
? x64
? The original OS installed on the system was Win 7 Home
? The OS is a full retail version that I installed
? 5 year old Board and chip
? I have re-installed the OS (always a clean install from a wiped drive) several times. Current install is a little over 1 year old.

? Intel Core i7 860 @ 2.8GHz
? NVidia GeForece GTX 650 Ti Boost
? Dell Studio XPS 8100 Motherboard w/ Intel H57 Chipset
? Diablotek Pro Series 550w Power Supply

? Dell
? Studio XPS 8100

Desktop

I have expanded and replaced a number parts on the system since originally purchased. I currently have 3 SATA Drives and the DVD drive attached to the motherboard as well as an external drive attached to the external eSata port. 12GB RAM. My OS resides on its own SSD and all files are stored on other drives. I am not overclocking. The only security I am running is MS security essentials.

Let me know if there is any additional info that will help. I appreciate your help.

john

RELEVANCY SCORE 200
Preferred Solution: BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

Hi

Can you update the driver to your Broadcom NetLink (TM) Gigabit Ethernet from Broadcom?
Let us know the result.

Read other 3 answers
RELEVANCY SCORE 121.6

Hello guys,
I tried resolving this issue by myself, but I can't figure it out. I'm getting BSOD on my new laptop. The laptop is brand new, I bought it about one month ago. It came with the default linux OS installed by the manufacturer, but I did a format and I installed Windows 7 Ultimate x64.
Machine specs:
Acer Aspire V3-771G 736b4G75Maii
CPU: Intel Core i7-3630QM 2.4GHz with Turbo Boost up to 3.4GHz
GPU: nVidia GeForce GT 640M 2GB DDR3 memory
RAM: 1x 4GB DDR3
HDD: 750 GB Toshiba

I got BSOD 3 times, every time I was browsing the internet using Mozilla Firefox. First couple of times I was on facebook checking some pictures and the 3rd time I was on forums looking for a solution to this problem. The BSOD happened when the laptop was on high performance settings, but i can't remember if it was plugged in or not.

As i said, the laptop is 1 month old, but it came with a broken speaker so it was sent to the service where they replaced the entire front cover. They said the reason is that the speakers are glued to the front cover so it was not possible to replace only the speakers. Before sending the laptop to the Acer service I did not experienced any BSOD and I used it for like 2-3 weeks, I even did some gaming on it.
The first BSOD occurred last week and the laptop wasn't used until yesterday when it happened again and the last BSOD happened just earlier today.

I will attach the prefmon.html and the folder with the files I got from the BSOD_Windows7_Vista_v2.64_jcgriff2_.ex... Read more

A:BSOD ntoskrnl.exe driver power state failure

I forgot to mention, from the last BSOD in event viewer i have the following events:
Event 6008
The previous system shutdown at 3:44:38 PM on ‎8/‎19/‎2013 was unexpected.

Event 1001
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8005294a10, 0xfffff80000b9c3d8, 0xfffffa8004b9a570). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081913-17596-01.

Event 41
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Event 1101
Audit events have been dropped by the transport. 0

Event 10002
WLAN Extensibility Module has stopped.

Module Path: C:\Windows\system32\athihvs.dll
Event 4001
WLAN AutoConfig service has successfully stopped.
Event 37
The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 41 seconds since the last report.

this last event shows up 8 times, one for each core. The CPU has 4 physical cores, but with hyperthreading it has a total of 8.

I did a Driver Verifier according to the instructions posted here (http://www.techsupportforum.com/foru...ed-473665.html) and there was no BSOD.

Read other 16 answers
RELEVANCY SCORE 121.6

Hey, my desktop computer keeps freezing here and there. I have a bad feeling it happens when working with my data HDD (not a system one). Some applications freeze and some not, I can restart, but it gets stuck when "Turning off" .. after few mins I get BSOD.

I've tried to boot up with driver Verifier and it freezes right after login screen .. no BSOD (within 30 mins).

The only thing I know from minidump is that it causes ntoskrnl.exe

Would someone help me to identify my problem?

Thanks in advance.

A:BSOD Driver Power State Failure ntoskrnl.exe

Welcome aboard.

Code:
fffff880`0355b488 fffff880`010bb041Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x3f041
sptd.sys is the most well known causes of a crash in windows 7. There are some technical reason behind it is that much crash prone. It is a paer of Daemon tools, so better you uninstall Daemon Tools.

Also free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 8 answers
RELEVANCY SCORE 121.6

I'm getting (seemingly) random BSOD's, and according to bluescreenview it's caused by ntoskrnl.exe. Not really sure how to fix this, and what it means.

It's a relatively fresh install of windows, built PC

AMD phenom II X4
ECS a750GM-M V7.0 motherboard
G Skill memory (4 GB)
Windows 7 Pro x64
if any of that is relevant.
All windows updates are installed
All drivers are up to date

It says I'm not permitted to upload the .dmp files, so I'll post them on Mediafire, unless there's a way I can view them myself and post them.

Mediafire link to all four dump files: http://www.mediafire.com/?psykx435dqvuabq,8m3hdbhxsquktsg,mth615eme064b6k,m6n5nd3144355os

A:BSOD, driver power state failure, ntoskrnl.exe

Hi -This is a way to see the BSOD records and post them here -Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next replyThank You -

Read other 13 answers
RELEVANCY SCORE 121.6

Hello, my computer has crash 4 times within the past two hours. I believe it has something to do with the Elgato Game Capture HD software I installed on the computer, since it seemed to only happen when I was either using it, or trying to uninstall it. Currently, I've uninstalled it, and no BSOD so far. I have updated my drivers and performed any windows updates available. Please help.

Thanks in advance.

Read other answers
RELEVANCY SCORE 120.4

Hello,

I've been having bsod's for a while ever since I disabled the Automatic Restart. I'm going to say that I figure it might have something to do with my Toshiba external hdd but I hope I can get a fix for this. I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.

My zipped minidump files: http://sdrv.ms/YPs4lS
Win7 Home Premium x64
Dell Inspiron 580S
Intel Pentium G6950 2.80GHz
4GB of RAM
Service Pack 1

Most recent crash info:On Sun 2/24/2013 1:44:16 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-16130-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80059EB060, 0xFFFFF80000B9C518, 0xFFFFFA80074604B0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Any help is greatly appreciated!

A:BSOD: Driver Power State Failure ntoskrnl.exe 0x9F

Hi and welcome to the forums.

Seems like a core Kernel level issue.

Things to do:

Run System File Checker to verify/repair the integrity of system files.
Full tutorial here: SFC /SCANNOW Command - System File Checker

Uninstall COMODO Internet Security and replace it with Microsoft Security Essentials - Microsoft Windows
Update it and run a full scan.

Go to Start>Run
Type MSCONFIG and press Enter.
Click on Startup tab, now click on Disable All.
Click Apply and OK. Reboot the system.

In addition, run chkdsk /f to repair corrupt hard drive sectors.
Full tutorial here: Disk Check

If all of the above fails, as a test, I'd suggest you to Enable Driver Verifier to find out which driver/software is causing the BSOD. Once you enable it, expect some frequent BSODs. After 24 hrs, disable the Driver Verifier and re-upload the dump files for analysis.

Let us know if it works.

The below is for information purpose only:

BugCheck Analysis:


Code:
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff80002e56000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 503f82be

DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa8005bca060

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002f3f6d2 to fffff80002ed4fc0

STACK_TEXT:
fffff800`00b9c4c8 fffff800... Read more

Read other 5 answers
RELEVANCY SCORE 120.4

Hello,

I've had 3 BSOD in the last few days, usually when my computer is asleep or when I am not actively using it. Malwarebytes anti-malware software indicates no issues, as does esot nod antivirus5.

Ran a free program (BlueScreenView v1.47 by nirsoft) which indicated a driver power state failure and/or a ntoskrnl.exe problem.

I do not know how to proceed, and would love some advice!

A:BSOD - driver power state failure or ntoskrnl.exe problem?

All of your crashes are caused by your Texas instruments USB 3.0 driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80140bfcd0, fffff80000b9c3d8, fffffa8011a2aac0}

*** WARNING: Unable to verify timestamp for tihub3.sys
*** ERROR: Module load completed but symbols could not be loaded for tihub3.sys
Probably caused by : tihub3.sys

Followup: MachineOwner
---------
Driver Reference Table - tihub3.sys
Looking at the driver we can see it is rather old:

Code:
kd> lmvm tihub3
start end module name
fffff880`053d7000 fffff880`053fb000 tihub3 T (no symbols)
Loaded symbol image file: tihub3.sys
Image path: \SystemRoot\system32\DRIVERS\tihub3.sys
Image name: tihub3.sys
Timestamp: Wed Nov 23 00:50:16 2011 (4ECC8998)
CheckSum: 00021577
ImageSize: 00024000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your driver from here: Analog, Embedded Processing, Semiconductor Company, Texas Instruments - TI.com

Read other 5 answers
RELEVANCY SCORE 120.4

I've been experiencing this BSOD on and off for a while now, and after doing some research came across a forum post suggesting to do a memtest. I've only had time to run it for 3 passes and will try for the full 8 later in the week when I have more time.

I thought I would start a thread to make sure there are no other underlying issues that could be the cause of the BSOD. Attached are the SF Files. Thanks!

A:BSOD Driver Power State Failure 0x0000009f (ntoskrnl.exe)

Hi MSB117.

The dedicated GPU is totally out!!! Does a restart brings it back?

Yes, a stop 0x9F can do it, based on sleep/hibernation settings and it is often seen for Optimus Technology/Switchable graphics. It is not the first instance.

As the GPU is causing continuous issue over a time, I would suggest you to contract Dell/Alienware servicing center.

Read other 7 answers
RELEVANCY SCORE 120.4

Hi!

I recently got a laptop from Scan.co.uk, it's a custom build using the Clevo kit.
I have been having intermittent BSOD's with a Driver Power State Failure message at random times, I can't see a discernible pattern.

It can happen whether on the desktop, chrome or gaming but generally on the desktop during minimal use.
I can play games for around 8 hours without issue but sometimes I'll get the error straight after booting up or whilst shutting down or just doing work in chrome.

I've seen people with similar issues in this forum and have tried to make sure all my drivers are up to date but I'm missing something somewhere

Any help offered would be greatly appreciated

Steps I've taken so far;

Avast Virus scan - No threatsEset online scan - No threatsAll windows Updates AppliedDism run
"Dism /Online /Cleanup-Image /ScanHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /CheckHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /RestoreHealth" - The restore operation completed successfully. The component store corruption was repaired. The operation completed successfully.

A:BSOD Driver Power State Failure ntoskrnl.exe+153ca0

Hi ApocalypseMeow & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe0011851f010
Irp is active with 6 stacks 4 is current (= 0xffffe0011851f1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001143e9880 00000000 fffff801f3aa2fc4-ffffd0002a3468f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe00117f61040 00000000 fffff800b4395fd8-ffffe0011a826f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0011a826f08
Args: 00000000 00000000 00000000 00000000


As we can see that the "nvlddmkm.sys" which is the... Read more

Read other 7 answers
RELEVANCY SCORE 120.4

Hello,

This morning when i woke up when i switched my pc's monitor i got those beloved letters.My computer was on idle,probably it fell asleep.The settings on power options were on Balanced mode.Pc is on stock clocks.No overclock made.
Heres the minidump file.
Notice: this happened a couple of days once i updated lots of windows updates.

A:BSOD - Driver power state failure - ntoskrnl.exe+75bc0

Welcome to the Forum.

AVG is contributing to your BSOD. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Rt64win7.sys Thu Feb 26 15:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Com... Read more

Read other 1 answers
RELEVANCY SCORE 120.4

Been having the occasional blue screen every few hours for the past week or two now, I've been trying to pinpoint exactly which drivers are causing the issue or if it's something more serious. It's a custom built machine and around 18 months old now, so it's not completely unlikely that some of my parts are starting to wear out. (Not overclocking)

Also, I had a hal.dll error associated with the Driver Power State Failure as well, it just didn't fit in the title.

If anyone can give me a hand with this it'd be much appreciated. I've attached the SF files as requested.

A:BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

I"m sorry that I missed this post.
Please reply back if you still need help. I'll reply after work today (after 3pm Eastern time in the US).

Read other 1 answers
RELEVANCY SCORE 119.2

Hi

XPS L502x : 2nd generation Intel Core i7-2720QM processor 2.20 GHz with Turbo Boost
2.0 up to 3.30 GH
8Gb Ram
Windows 7 64 bit

Have been having repeated BSODs lately. Used to get them about once or twice a week but its now a few times a day that it happens.

Have attached the zip file made by the download from this site and will paste the WhoCrashed Report below.

I have tried numerous fixes and nothing has worked...getting desperate.

Thanks in advance guys


System Information (local)
--------------------------------------------------------------------------------

computer name: LAUCHLANMAC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8499937280 total
VM: 2147352576, free: 1943908352



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Sun 3/4/2012 4:14:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\030412-14710-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800D8BC4F0, 0xFFFFF80000B9C3D8, 0xFFFFFA800BDDA010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C... Read more

A:Random BSOD : ntoskrnl.exe (nt+0x7CC40) Driver Power State Failure

These were Related to Mbm3DevMt.sys F3607gw Mobile Broadband Device Management Driver from MCCI Corporation.

I would re-install the newest driver available.
The same is true for wwanussf.sys F3607gw Mobile Broadband Module from Ericsson AB

Why 2 Broadband drivers?

Read other 6 answers
RELEVANCY SCORE 118

Hello and thanks for letting me post on this awesome forum!!!!

I am fixing a family members computer and it has stumped me. I have tried everything that I can find online related to my problem outside of reinstalling but I think it could be a hardware (power or memory) issue from what i read and a reinstall wouldnt fix it.

Driver_Power_State_Failure

I cannot trigger the BSoD of cue. Ive tried quite a bit, bringing it back from sleep, full load, no load, Skyrim, and different video cards.

I have been using Bluescreenviewer / myeventviewer to give me some incite but I couldn't find anything that would help my particular problem. So i present it to the people that know more then me, the online community. I followed the BSoD posting rules but let me know. Ill be checking back frequently.

Thanks again.

PS this computer is having raid issues. I get "Degraded NVIDIA mirror 931.51G" red flashing error for a couple seconds during boot. I dont know if this is related but BSoD's did not start at exactly the same time, but quite a bit of time after, I am told.

A:Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

A few issues

1-asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2-These were all related to your NVIDIA nForce RAID Driver. Yours is from 2006. Update to current of remove.

3-Old drivers

Code:
ASACPI.sys 3/27/2005 10:30:36 PM
nvrd64.sys 11/10/2006 4:18:39 PM
SiWinAcc.sys 6/14/2007 8:02:02 PM
SiRemFil.sys 6/20/2007 3:42:10 PM
SI3132.sys 10/3/2007 2:39:29 PM
dump_nvstor64.sys 1/25/2008 11:01:22 PM
nvstor64.sys 1/25/2008 11:01:22 PM
nvm62x64.sys 10/17/2008 5:01:06 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of De... Read more

Read other 3 answers
RELEVANCY SCORE 109.6

Hi Folks,

I really hope you can help me, I followed the instructions to create the attachement.

What I know so far is that this machine has BSOD'd several times...The last 2 times a ultilty called BlueScreenViewer.exe says it's due to "Driver power state failure" caused by: ntoskrnl.exe

I checked event viewer for the time mentioned 6/17/2012 11:29:02 pm and it says there is system error "source:Bug Check" at that exact time

For anti-virus I have MS Security Essentials. For Spyware, I have Spybot S&D.
I use with Workstation 7 as a study too so it has hosed my VMs which is very disappointing. I would really like to root cause this to continue with confidence...

I know you hear this all the time...but... please help! I don't mind collecting info and checking into things, I am just out of my element a little here.

I looked throug the results of the permon report and it seems clean for the most part.

Thanks in advance,

Jay

A:BSOD "Driver power state failure" caused by: ntoskrnl.exe

Is there anything else I can do to help action this post? Thanks

Read other 9 answers
RELEVANCY SCORE 109.6

I'm getting a BSOD pretty much every time I shutdown the PC. Has only just started happening in the last couple of weeks.

DRIVER_POWER_STATE_FAILURE
caused by driver: ntoskrnl.exe

I've attached the SFDiagnostic here - thanks.

A:BSOD - ntoskrnl.exe "driver power state failure" at shutdown

Hi thedriver.

The BSODs are caused by REALTEK 2832U USB Driver (c:\windows\system32\drivers\rtl2832uusb.sys)





Quote:
Windows Error Reporting: Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys, type 0
Event Name: BlueScreen
Response: Not available
..........;Analysis symbol: X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys
............



Code:
BugCheck 9F, {3, fffffa8008604060, fffff80001f4a518, fffffa800ae4e710}

*** WARNING: Unable to verify timestamp for RTL2832UUSB.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL2832UUSB.sys
Probably caused by : RTL2832UUSB.sys

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`07778000 fffff880`07785000 RTL2832UUSB T (no symbols)
Loaded symbol image file: RTL2832UUSB.sys
Image path: RTL2832UUSB.sys
Image name: RTL2832UUSB.sys
Timestamp: Wed May 04 14:05:12 2011 (4DC10FC0)
CheckSum: 0000ACF2
ImageSize: 0000D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Some information about what this driver does: Realtek
Unfortunately I am unable to search an appropriate update for you. I hope you know the sources to get it, as you are using it.

If you can, update the driver. Otherwise, dont use it.

Read other 3 answers
RELEVANCY SCORE 109.2

I apologize in advance if this is a duplicate thread to a problem already solved previously.

Two months ago, I purchased this laptop (Alienware M17x R3) and was met with strange problems some time after owning it. An error code for memory failure, refusal to boot, BSOD with the error of DRIVER_IRQL_NOT_LESS_OR_EQUAL and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Not sure what to do, I didn't do much of anything, except check my RAM chips for contact damage, and a swapping of positions was performed. So far, those particular error messages have not happened again, except for a DRIVER_POWER_STATE_FAILURE. These happen seemingly at random, but occur more frequently when the computer is under graphics stress, such as in a Starcraft 2 match.

I have, per the posting suggestions, attached relevant files.

Thanks.

A:Driver Power State Failure, ntoskrnl.exe?

Welcome to SevenForums.

Here's an output of your recent BSOD dump file:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800e3c6a10, fffff80000b9c3d8, fffffa800ed0fe10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 000000000000... Read more

Read other 9 answers
RELEVANCY SCORE 109.2

I have a 13 days old win7 pro RTM x64 system. In the past two days I had
two BSODs of similar fashion:

The machine was running for several hours at that point, and suddenly the
blue screen pops up. I wasn't really pushing the system, just browsing.

The crash dump is like this in both cases:






Quote:
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x9F (0x3, 0xFFFFFA8003B4B050, 0xFFFFF80000B9C518, 0xFFFFFA80052E0E10)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Likely the culprit is another
driver on your system which cannot be identified.



I'd appreciate any help.

A:ntoskrnl Driver power state failure

I had the same problem
I tried everything nothing worked
I saved everything in safe mode and did a re-install

But do some searching on Google
one thing I didnt try was replacing ntoskrnl.exe with one downloaded from the net
I will search for mine & post it here for you here

Also do some searching on here

Read other 9 answers
RELEVANCY SCORE 108

Hi all,

I was hoping to bring the 'big guns' on this forum to bear on my problem. My friend has an Asus UX32A notebook with Windows 8. To provide some back story (the meat of the problem is after this paragraph if you want to skip)...

It is brand new with hardly anything installed on it besides Norton 2013 and Office. It would freeze about 60 seconds after start up, for a good long while, and it seemed to get worse over time. I have done a LOT of things to it in the last two days - uninstalled Asus bloatware (which was also causing a black screen on startup problem), updated just about every driver and BIOS, disabled fast start up, disabled 'dynamictic' via cmd prompt, disabled all non-Windows services and then progressively enabled them to try to isolate a rogue one. I THINK I might have fixed it (in the end I left 7 services disabled - two Intel Management, Intel Dynamic application, Intel ME service, as well as Wireless PAN, Skype updater and Sony PC companion. I have no idea if it's one of these but the system seems not to freeze now and I have reached the end of my patience anyway). It might seem like too much but it was very difficult because e.g. to test the effect of one change I would have to restart, and the laptop would not restart because of the black screen issue, or would immediately freeze. It was very frustrating and I had to work from safe mode to start with, but now it seems to behave better.

But...

I have had several hang-during-reboots today, forcing ... Read more

A:Driver Power State Failure; ntoskrnl.exe; ntkrnlmp.exe

Check out the forum thread here "ntoskrnl.exe" BSOD - Windows 7 Help Forums

Since it is new or relatively new a complete reinstall using the ASUS recovery is recommended. That I saw on several searches.

Read other 1 answers
RELEVANCY SCORE 107.2

Hello.I am new here so please excuse me for any mistake i might make.

Just when i sing in my account i get an error and my laptop restarts.
My operating system is windows 8.
I have collected all the information you might need with SF diagnostic tool.

Attachment 48873

Hope you help me.

A:Driver Power State Failure ntoskrnl.Unkown driver.

Hi Simiskos123 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the latest dump file for informative purposes :-

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80046a3060, fffff880009bfb40, fffffa80088498f0}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys
Followup: MachineOwner
---------
1: kd> !irp fffffa80088498f0
Irp is active with 4 stacks 3 is current (= 0xfffffa8008849a50)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 2 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 ffffffffc000000e
[ 16, 0] 0 2 fffffa80046a3060 00000000 fffff88006e17018-fffffa80085907c0
\Driver\pci nvlddmkm
Args: 000000... Read more

Read other 3 answers
RELEVANCY SCORE 107.2

Hello,
I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.
My minidump file: https://drive.google.com/file/d/0Bz9...it?usp=sharing .

DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80`07d0ba10
Caused by Driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75bc0
File description: NT Kernel & System
Crash address: ntoskrnl.exe+75bc0

Windows 7 Professional x64 Service Pack 1
Lenozo Ideapad z500
8gb ram, NVIDIA GEFORCE 2gb
Intel Core i7

Any help is greatly appreciated!

A:Windows 7 Pro: Driver Power State Failure ntoskrnl.exe 0x9F

from the research Ive done previously etc; I do believe the ntoskrnl.exe possibly leads to ram issue. I would test the ram by running memtest86+ from the following link: its best to let it run overnight if possible and to run it several times to make certain it shows accurate results as sometimes errors wont show up right away. Here is the link to that:

Memtest86+ - Advanced Memory Diagnostic Tool

If you get any errors from the test; then its likely you have one or more bad ram sticks

Read other 9 answers
RELEVANCY SCORE 104.8

Win7 laptop running fine, suddenly 2 BSODs today, within an hour. First occurred while surfing (firefox), second occurred without any keyboard/mouse activity. No new hardware installed since new hard drive about a month ago. SF attached. TIA

A:Random BSODs, ntoskrnl, driver power state failure reports on minidump

Sorry for the late reply, Your dump files are not opening for me.
But you should remove some add ons to firefox, specially the adxloader.dll





Quote:
Event[10757]:
Log Name: Application
Source: SideBySide
Date: 2012-10-03T15:36:32.000
Event ID: 9
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: RWT-PC
Description:
Activation context generation failed for "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest".Error in manifest or policy file "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest" on line 2. The manifest file root element must be assembly.


It may be the cause of the crash while using firefox.

Just a question, when the keyboard and mouse was inactive and you got the crash, was the Cyberlink editing program in use? The event log says so, and actually that program failed there.

You should update the nvidia display driver, too.

Code:
Driver c:\windows\system32\drivers\nvlddmkm.sys (8.17.12.7527, 10.09 MB (10,583,656 bytes), 6/23/2011 6:38 PM)
Update your WiFi driver.

Code:
Driver c:\windows\system32\drivers\netw5s32.sys (13.1.1.1, 6.44 MB (6,755,840 bytes), 1/13/2010 3:36 PM)
Update ethernet controller driver.

Code:
Driver c:\windows\system32\drivers\yk62x86.sys (11.43.1.3, 310.28 KB (317,728 bytes), 5/26/2011 2:29 AM)
Free up the startup.
Click on the Start button
Type “msconf... Read more

Read other 3 answers
RELEVANCY SCORE 104.8

http://m.bestofmedia.com/sfp/images/...il-100x100.jpg


I hope someone can help been on this problem for a week now.

I have an external synth that conects via usb My problem is when i switch off the nord the usb ports crash and any new connection is not recognised until i restart my computer which when i do hangs on the shutdown page for about 10 minutes the i get bsod with error driver state failure or bad pool header.

I can start my computer then turn on and off the nord with no issues the problem only happens when i use it in cubase 7 as a midi track even if no midi signal is sent to the nord. The problem is when i turn off the nord by the power button the driver disconnects then if i try to reconnect the nord nothing happens in the device manager all usb that are still connected work but any new connection is not seen.

I have done a fresh install of windows 7 64bit updated all drivers for everything & windows updates.

I have tried disconnecting all usb devices and still the same problem. Im not over clocking or under clocking. I have tried a different usb lead, used various usb ports, external powered usb ports.

The drivers i have installed are nord a1 midi, clavia usb 3.02 driver & clavia compostite usb driver.The latest ones.

The units was working fine until about 2 weeks ago where i was able turn the unit on and off using cubase with no problems.

Hope we can find a solution to the problem.

Read other answers
RELEVANCY SCORE 102.8

Hi,

I have a 2 week old HP Envy 14, running Windows 7 Home Premium 64bit, 4GB Ram, and an ATI Radeon HD 5650 Graphics card.

Initially for the first few days the notebook worked well, no problems. This week, I encountered the dreaded BSOD. The notebook had trouble shutting down or restarting, taking 10-15 minutes or so. Upon rebooting, I get a BSOD with DRIVER_POWER_STATE_FAILURE message.

I also encountered the USB not recognizing anything that was connected to it after the computer started. If the mouse/ thumbdrive was connected before the computer booted up, it worked. If it was disconnected after booting up, and reconnected the mouse/ thumbdrive would not work. I do not get anything (no error messages or acknowledgement that anything was connected).

I checked the Device Manager, and there are no error messages.

Strange this is, these problems happen sporadically. Sometimes everything works well- USB working as it should, not issues restarting etc. Upon rebooting, the problem starts again.

I've tried updating the latest Win updates, drivers, HP bios etc but still no luck.

Please help. Thank you in advance.

A:BSOD Drive Power State Failure, ntoskrnl.exe, USB ports not working

Hi cabe and Welcome to SF!

First of all, hpdskflt.sys was mentioned in the crash dmp, it belongs to HP Mobile Data Protection System Disk Filter. I would download and install fresh copy of the driver, or might be uninstall it to see if it has anything to do with the crashes you've experienced.

For the mouse and thumbdrive, you might want to have their drivers installed properly, or perhaps you might want to try to have fresh re-install of USB driver by going to Device manager, under USB list you uninstall everything then restart your system. (To go to Device manager, right click on computer and choose manager)

In looking through your driver, I can see some out of date one:

Code:
btwl2cap btwl2cap.sys Fri Apr 03 19:28:45 2009 (49D6A9BD)
Broadcom Bluetooth L2CAP Service. Please download and install fresh update of it


Code:
RimSerial_AMD64 RimSerial_AMD64.sys Mon Nov 24 11:01:01 2008 (492ADDCD)
Virtual Serial Port driver for Blackberry. This need to be updated as soon as possible

BUGCHECK SUMMARY:

Code:
BugCheck 1000009F, {4, 258, fffffa800416d680, fffff80000b9c510}

Unable to load image \SystemRoot\system32\DRIVERS\hpdskflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : umbus.sys

Followup: MachineOwner
---------
Regard,

Tuan

Read other 7 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

I am getting the bsod error driver power state failure. It appears to be random unless i go to play star wars the old republic and it does it with in about 10 minutes of playing every time. This is fairly recent. I was playing it before for several hours with out trouble, and now it does it outside of the game. I hope you can help. Attachment 312126

Attachment 312127

A:BSOD Driver Power State Failure

Hi punkiemi.

How many days ago you installed Service Pack 1? Very recently it seems?

The zip contains two crash dumps. One, the older one is related to games. And, this time the PC was not SP1 installed.

Code:
BugCheck 116, {fffffa80066fb010, fffff8800517e664, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+97e664 )

Followup: MachineOwner
---------
Taking the age of your PC into consideration, stop 0x116 BSODs may occur under certain conditions.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

The PC seems to be overclocked.

Code:
Max Speed 2300MHz
Current Speed 2310MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Install the NVIDIA DRI... Read more

Read other 1 answers
RELEVANCY SCORE 98

? OS - Vista/ Windows 7 ? Windows 7 Home Premium
? x86 (32-bit) or x64 ? 32-bit
?What was original installed OS on system? Yes.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Factory installed.
? Age of system (hardware) 15 months.
? Age of OS installation - have you re-installed the OS? Haven't reinstalled.
? CPU Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (2 CPUs), ~2.0GHz
? Video Card NVIDIA GeForce GT 130M
? MotherBoard Mobile Intel(R) 4 Series? I'm unsure of how to find this information.
? Power Supply - brand & wattage Unsure about this as well.
? System Manufacturer MSI
? Exact model number (if laptop, check label on bottom) MS-1722

Hello, I've been having some problems with recent random BSODs. I had the same problem several months ago, but it went away on it's own. If you could give me any ideas on what's up and how we can fix it, I'd really appreciate it. Thank you!

A:BSOD: Driver Power State Failure?

Please uninstall Daemon Tools as it's sptd.sys driver is known to cause BSOD's on Win7 systems. Then use this free tool to ensure that the offending sptd.sys driver is removed from the system: DuplexSecure - FAQ

The BSOD's blame o2sd.sys - a component of your Memory Card Reader software by O2Micro. Please download and install this driver to see if that fixes the problem: MSI Global ? Download Center
Also, please take care of these:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5) - Windows Update will take care of this if it's available
speedfan.sys Sun Sep 24 09:28:47 2006 (4516880F)
giveio.sys Wed Apr 03 22:33:25 1996 (316334F5)
dump_iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
LMouFilt.Sys Tue Aug 24 1... Read more

Read other 3 answers
RELEVANCY SCORE 98

Attachment 215373

Attachment 215374

Attachment 215382
Hey!
I often get a BSOD: Driver Power State Failure. I attached my .dmp file. BlueScreenView says it's related to halmacpi.dll and ntoskrnl.exe. I hope someone knows a solution.

System:
32-bit Windows 7 Professional
Acer 5741 notebook
2-3 years old
OS has been re?nstalled 1,5 year ago
Ridder

A:BSOD: Driver Power State Failure

Problem Devices:
Code:
Ethernet Controller PCI \ VEN_14E4 & SUBSYS_036D1025 & DEV_1692 & REV_01 \ 4 & 12119FE & 0 & 00E0 The drivers for this device are not installed.
Photosmart Premium C309g-m ROOT \ MULTIFUNCTION \ 0000 This device is disabled.
Officejet Pro 8500 A910 ROOT \ MULTIFUNCTION \ 0002 The drivers for this device are not installed.
Officejet Pro 8500 A910 ROOT \ MULTIFUNCTION \ 0003 The drivers for this device are not installed.
Virtual Serial Bus Enumerator ROOT \ SYSTEM \ 0002 39
Photosmart Premium C309g-m ROOT \ IMAGE \ 0000 This device is disabled.
The Ethernet driver and Virtual Serial Bus Enumerator drivers should be taken care of. Please make sure all drivers are installed from Acer support. If you need help determining drivers, let us know.


Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Problematic Software:
Code:
Start Menu\Programs\TuneUp Utilities 2011 Public:Start Menu\Programs\TuneUp Utilities 2011 Public
... Read more

Read other 5 answers
RELEVANCY SCORE 98

i get this at least once a day because i dont turn my computer off and it gets really frustrating sometimes.

attached is the minidump file.

please if somebody could help me out :)

A:BSOD power state driver failure

FYI - I have severe eye problems. If I don't respond to your postings, please PM another staff member for assistance.

Please provide this info for a more complete analysis: http://www.techsupportforum.com/foru...ta-452654.html

The memory dump points to your network drivers as the cause. In most cases updating these will fix the problem.

BUT, the antivirus/Internet Security application that you use can also cause this. Uninstalling it and installing a freshly downloaded copy can fix that.

Also, this may be caused by a hardware problem. But the diagnosis of that is done by trying the above things.

Another possibility is the Gigabyte EasyTune software - but I'm not 100% sure that that's involved in this situation. To test, uninstall it and see if it stops the BSOD's.

Finally, the memory dump (crash) seems to have occurred during the sleep/hibernate transition. As such you should also reinstall the chipset, storage, and video drivers for your system.

Good luck!

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\092611-22854-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 26 11:52:36.081 2011 (UTC - 4:00)
System Uptime: 0 days 1:23:55.251
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`03ab1a10 fffff800`044... Read more

Read other 1 answers
RELEVANCY SCORE 98

I just got my ASUS G750 from Bestbuy a few weeks ago. I've been encountering this same BSOD since I got it (after installing programs). Lately it seems to be happening when I close a game from the battle.net app and attempt to open another. Other than that it almost seems to happen completely at random.

Thanks for the help!

A:BSOD Power State Driver Failure

Hi SnakeDoc919 & welcome to the forums ^_^,

I have analyzed your dump files and they all are of bugcheck code Driver_Power_State_Failure with the first parameter as 3. Below is analysis for informative purposes :-

Code:
**************************Thu Jun 26 03:19:19.764 2014 (UTC + 5:30)**************************Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001e4732880, ffffd001624aa930, ffffe001e4759670}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``


On further analysis, the driver blamed is the "acpi.sys" which is a Windows component, and chance of it being at fault is extremely unlikely. Below is a list of the 3rd party drivers installed on your PC and I think that the ASUS Bloatware is causing all this. I have highlighted those Asus Bloatware drivers as well.

Code:
**************************Thu Jun 26 03:19:19.764 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
AiCharger.sys Fri Sep 23 07:34:40 2011 (4E7BE938)
btwl2cap... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi,

? OS: Windows Vista SP2
? 64-bit
? No previous installed OS
? Age of system (hardware) - 2 years, 3 months
? Age of OS installation - have you re-installed the OS? 2 years, 3 months, never re-installed
? CPU - Don't know
? Video Card - nVidia - Display - NVIDIA GeForce 7600 GS
? MotherBoard - Don't know
? Power Supply - Don't know

The problem is sometimes when I want to shut my computer down it takes AGES. After waiting about 20 minutes, it will just BSOD and be fine when I re-boot it. Sometimes, but not as often, after I turn on my computer back from sleep mode it will go very slow for about 20 minutes then just randomly BSOD.

Thanks in advance to anyone that can help!

A:BSOD Driver Power State Failure

Hi -

The BSOD dump shows OS corruption. The likely cause is unknown hardware failure.

Run memtest86+ --> http://www.memtest.org/#downiso
- one stick at a time, alternate the slots

Run chkdsk /r

Run HDD diagnostics

Regards. . .

jcgriff2

.



Vista x64 SP2 - - BSOD BUGCHECK 0x9f (0x3,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\Mini041310-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18160.amd64fre.vistasp2_gdr.091208-0542
Machine Name:
Kernel base = 0xfffff800`0204e000 PsLoadedModuleList = 0xfffff800`02212dd0
Debug session time: Tue Apr 13 21:25:44.807 2010 (GMT-4)
System Uptime: 7 days 0:29:19.048
Loading Kernel Symbols
..........................................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis... Read more

Read other 9 answers
RELEVANCY SCORE 98

New Computer Setup. Seemingly Random BSODs several times a day.

At first it was just happening when playing games, or running AUTOCAD. But now it just crashed while watching Hulu. I tried reinstalling all drivers I could think of and even did a whole system wipe with no luck.. still BSing.



I've attached my Seven Forums .zip as instructed.

From Mini-Dump:
Loading Dump File [C:\Users\iJoeTime\Desktop\073112-12901-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00210842?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`0175a212?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03007000 PsLoadedModuleList = 0xfffff800`0324b670
Debug session time: Tue Jul 31 19:55:46.086 2012 (UTC - 7:00)
System Uptime: 0 days 22:31:20.914
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
..........
**************... Read more

A:BSOD - Driver Power State Failure

Please fill out your system specs. Click the link in my signature to do it.

Read other 9 answers
RELEVANCY SCORE 98

I'm getting this error when the system goes to a power down state I think. If I leave it on over night next morning I have the BSOD with this error. Not sure what to do about it. I uploaded the info files.

A:BSOD Driver power state failure

Your crashes are being caused by McAfee. It has a 2008 driver attached to it. You should update to a newer version of McAfee, and if you already have, the old version may not have been completely removed. Uninstall, download a fresh copy of the most up to date installer for McAfee, and re-install McAfee to see if that resolves the crashes.

How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal tool (MCPR.exe)


If the above does not work, remove McAfee completely using MCPR and replace it with either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Also, update the following driver:
Code:
fffff880`04784000 fffff880`047b6000 Rt64win7 Rt64win7.sys Thu Feb 26 02:04:13 2009 (49A65B0D)
It is your LAN driver, and you can find the update through HP Support for your model:
HP Support & Drivers | United States

You can also find it here:
Rt64win7.sys
->
Realtek

Read other 1 answers
RELEVANCY SCORE 98

Hi there, begging someone to help me.
Today when I using my laptop it stucked ,and I reboot it by press the power button,and when it rebooted it stucked at Welcome,and then the blue screen then driver power state failure I tried to reinstalled my os but problem was still here. I found when I uninstalled the Nvidia driver the os can work normally. Really really want someone to help. Thx a lot.

A:BSOD driver power state failure

  
Quote: Originally Posted by Mucbox


......... driver power state failure ..................
I found when I uninstalled the Nvidia driver the os can work normally.


Good info. It occurs.

We need to see the data as per the Blue Screen of Death (BSOD) Posting Instructions.Attach it in your next post in this thread.

Read other 8 answers
RELEVANCY SCORE 98

Hey all! I'm new here and hoping you might be able to help me with my BSOD! I'm getting a Driver Power State Failure. It's strange, the computer starts to lag (the mouse pointer starts to get sticky) then eventually it will hang. Only happens when I first boot the machine in the morning then its usually okay after an immediate restart. But it does seem to happen daily.

I've run the memory test & hdd tests as suggested in the sticky and they run fine without error. I have attached the files as requested along with a minidump from the BSOD. The information also requested in the sticky is below:

? OS - Windows 7 SP1
? x64
? Nothing preinstalled - I built it
? OS OEM bought alongside hardware
? Age of system - about 3 months
? Age of OS installation - 2 months (reinstalled OS once to try and repair this issue)

? CPU - Intel i7 2600K (Clocked at 4.2Ghz)
? Video Card - Nvidia GTX280
? MotherBoard - Asus Maximus IV Gene Z
? Power Supply - Tagan TG800-BZ 800W
? Corsair 160Gb SSD
? WD 500Gb HDD

? System Manufacturer: Me

Hope you can help!

Many thanks.

A:BSOD - Driver Power State Failure

Edit: wrong thread. Whoops!

Read other 5 answers
RELEVANCY SCORE 98

I have an ASUS S56CM laptop with Windows 8.1.

For the past few days I have been getting a BSOD (Driver Power State Failure) upon start up. Leading up to this, my computer would freeze completely at random times not that often and I had to do a hard shut down to fix it.

The past three days have been identical. When turning my computer on from a completlely off state, it takes forever to start then eventually gives me the BSOD. The 0% thing never loads so I do a hard shut down and turn the computer back on. It still takes forever to start (8 minutes +) but I don't get a BSOD and am able to use the computer fine. Then when shutting down, it takes over 6-8 minutes as well. Before all this, my computer would get to the log in screen in under one minute.

I had a program called "WhoCrashed" but it hasn't logged any of the BSOD's from startup, only ones that I had when the computer was already on. For one of them, it told me the error may have been caused by iastora.sys which was the Intel Rapid Storage Technology driver. I tried to delete this as well as installing a newer version but it didn't fix anything.

A:BSOD Driver Power State Failure

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!
Add to that the release of the Win10 preview and my system messing up - and I'm way behind on replying to topics. Sorry!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 8 answers
RELEVANCY SCORE 98

Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things first, i need to find out why i cannot shut down so hopefully someone can ... Read more

A:BSOD - driver power state failure

  
Quote: Originally Posted by onyxquark


Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things... Read more

Read other 9 answers
RELEVANCY SCORE 98

I know little about computers but I can follow directions well.

This is my computer

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4089 Mb
Graphics Card: NVIDIA GeForce 9800M GTS , 1024 Mb
Hard Drives: C: Total - 295242 MB, Free - 181383 MB;
Motherboard: Gateway , IMV , Not Applicable , INVALID
Antivirus: avast! Antivirus, Updated and Enabled

It has been giving me the blue screen of death at least daily for over a week usually around 8 pm but it does like to mix things up and do it at other times. It was doing this same kind of thing this past march and I reformated which fixed the problem. However I would rather not do that again. I did a system restore back to the begining of the month but that didn't help.

Based on Blue screen viewer most of my prolems have been caused by ntoskrnl.exe. I have attached JPEGs of what it shows
 

Read other answers
RELEVANCY SCORE 98

Hello there, I hope someone would be able to point me in the right direction of the cause of a BSOD. I have pasted the memory dump below.

Thanks in advance.
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Eden of Africa\Documents\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`6ce07000 PsLoadedModuleList = 0xfffff800`6d0d3aa0
Debug session time: Wed Oct 8 07:14:18.844 2014 (UTC + 2:00)
System Uptime: 0 days 17:52:34.531
Loading Kernel Symbols
...............................................................
................................................................
...............................................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********************************************... Read more

A:BSOD - driver power state failure - IRP

Hello, Welcome to EF!

To be able to better help you, please follow the Blue Screen of Death (BSOD) Posting Instructions

-Justin

Read other 1 answers
RELEVANCY SCORE 98

Hello at all.

Sometimes when i try to shut down my compuer, it hangs for a little bit and than i get a bsod with the driver power state failure 0x9F.

This is not every time but randomly.

I hope anyone can help!!!

? OS -Windows 7
? x64
? What was original installed OS on system? Windows 7 x64
? Full retail
? Age of system (hardware)- 1 year
? Age of OS installation - have you re-installed the OS? one year, never re installed

? CPU - intel i5 [email protected] 3,4GHz
? Video Card - Nvidia GTX 680
? MotherBoard - Asus P8Z77-V LX
? Power Supply - BeQuiet & 750w

A:BSOD driver power state failure

Hi, and welcome to TSF.

Please navigate to c:\windows\minidump, zip up any minidumps you find and attach to your next post.

I'm not sure what the analysts do in cases like this but the BSOD.zip that you attached contains your perfmon report but its in German. Anything you can do about that from your end?

Read other 6 answers
RELEVANCY SCORE 98

I've been coming across this bsod for a few weeks now, it only happens when i put the computer into sleep/hibernate. It even happens sometimes when the computer tries to start from a cold boot. The only hardware change i've made to the computer was a new wireless adapter from netgear model no.: WNA3100. I made sure to download the latest driver to support windows 8 but the bsod still occurs.

Heres a link to my minidump file if anyone can analyze it and tell me which driver is causing the problem it would be much appreciated.

https://skydrive.live.com/?cid=284E7...02A97481AA!105

Thanks

Read other answers
RELEVANCY SCORE 98

Atleast once a day i get the BSOD. Usually It will crash while im playing a game. I have attached an SFdebugfiles zip i hope this will help to resolve my issuse.

A:BSOD Driver Power State Failure

Hi Crinall & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sun Aug 24 07:36:48.770 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001987d5880, fffff801244d1930, ffffe001987e5b00}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Aug 23 05:28:42.138 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001b5dee060, ffffd001dddc6930, ffffe001b5dd6010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

???????????????????????????... Read more

Read other 3 answers
RELEVANCY SCORE 98

hey
sometimes when i shut down my computer it takes forever to shut down and then i get a BSoD. i attached a zip file with the dumpfiles.
hope you guys can help me
regards kayabrico

A:Driver power state Failure BSoD

Hi,

The attached DMP files are all of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

IMAGE_NAME: asmthub3.sys

MODULE_NAME: asmthub3

FAULTING_MODULE: fffff88006d73000 asmthub3

Running an !irp on the blocked IRP address (4th parameter of the bugcheck) we get:


Code:

0: kd> !irp fffffa80148ba3c0
Irp is active with 7 stacks 6 is current (= 0xfffffa80148ba5f8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8013d45430 00000000 fffff80002e776f0-fffffa80155be4c0 Success Error Cancel pending
\Driver\asmthub3 nt!IopUnloadSafeCompletion
Ultimately, it appears asmthub3.sys is the culprit here, wh... Read more

Read other 19 answers
RELEVANCY SCORE 98

Hi to all!
I'm r2. I'm having a problem on my system:
Processor: Intel core i7 875k, 9months
Motherboard: Maximus III gene, 4months
Memory: 8gb Ripjaws 1600mhz, 1.5year
Videocard: HD4870, 1.5year
Power supply: ocz sxsII 600w, 4months
Hard drive: WD 500gb, 1.5year

OS: Windows 7 x64
Observation:
Clean install OS 4 times. Shared the same symptoms
- it occurs when an application does not respond, but I can move through windows normally without lag. Then this application cannot be terminated under windows task manager. Since this application did not respond, I decided to shut it down. "logging off" for about 2-3minutes then "shutting down" for about 10-12minutes then BSOD appears stating "POWER DRIVER STATE FAILURE". It restarts automatically, freezes on windows log on screen (because I have to input password). Both mouse and keyboard does not move, even if reconnected. Rebooting the system on 'safe mode' does the trick on going inside windows, the event viewer shows: a bunch of 'network list service' and smb redirector shows at very short interval.

Even at 4th install of OS(delete drive, format to a new drive then install windows 7), error is still there.
It's been 2 weeks now, and it's very frustrating knowing that the error would show up.

thanks,
r2

A:BSOD Power Driver State Failure

Hi -

You have no Windows Updates installed.

Install ALL outstanding Windows Updates, including Windows 7 SP1 -

www.update.microsoft.com


Regards. . .

jcgriff2


`

BSOD SUMMARY

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Apr 30 13:29:01.674 2011 (GMT-4)
System Uptime: 0 days 3:08:37.658
Probably caused by : HDAudBus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_HDAudBus.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`066d3a20 fffff800`03fd9518 fffffa80`07364010
BiosVersion = 2103
BiosReleaseDate = 12/15/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 2930
CurrentSpeed: 2942
??????????????????????????????????????????????????????????????????????????????????????``

Read other 17 answers
RELEVANCY SCORE 98

I've had the same BSOD twice now whilst playing Call Of Duty - Modern Warefare 3. The game freezes then the BSOD appears.

I have also attached the 2 minidumps

? OS - Windows 7 Ultimate Service Pack 1
? x86 x64 ?
? What was original installed OS on system? Windows 7 Ultimate
? OS - Full retail version
? Age of system (hardware) - 3 Years
? Age of OS installation - Approx 1-2 Months old

? CPU - Intel Core 2 Quad Q6600 @ 2.4GHz
? Video Card - HIS ATI 5850
? MotherBoard - Asus P5K Deluxe WiFi
? Power Supply - 600W SEASONIC M12-600 Modular

? System Manufacturer - Self Build

A:BSOD - Driver Power State Failure

Perfmon reports an issue with a PS2 keyboard. If you're using a USB keyboard, it's safe to ignore this message.

You have 2 different wired network controllers (Realtek and Marvell). Why is this? Why isn't the Marvell device either removed from your system or disabled in the BIOS?

You have a Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
Win7 doesn't like these devices, and will Blue Screen in a heartbeat if you use older drivers. Here's my rant on these devices:

Quote:




I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.




MSINFO32 points to disk issues and cites your jraid.sys (RAID) drivers (as does both memory dumps). Please:
- run hardware diagnostics on all hard drives: HD Diagnostic (read the details at the link) - Test ALL of the hard drives.
- update the RAID drivers (if they are the most current version - uninstall them, then install a fresh copy).
- check the RAID array for problems (I don't have much knowledge about RAID - try over in the Hardware Forums).

The Asus P5 series of mobo's has some issues with memory settings/timings/voltag... Read more

Read other 13 answers
RELEVANCY SCORE 98

My laptop has been having issues with sleep, hibernate, shutdown, etc... On all of these functions it shuts down the graphics, turns off the speakers and wifi, and then just hangs without shutting down. Every now and then it will work properly for a few days and then go back to giving me grief.

The BSOD error is relatively new, maybe for the last two to three weeks. I've only noticed it when the computer is trying to go into sleep mode.

I have attached the results of the Sf Diagnostic Tool.

Thank you in advance for your help.

A:BSOD Driver Power State Failure

Bump

Read other 1 answers