Over 1 million tech questions and answers.

Bitlocker - Screen is only lightblue without any fields

Q: Bitlocker - Screen is only lightblue without any fields

Hi,
one Notebook (Win 8, 64x, encrypted with Bitlocker) shows on every boot only a lightblue screen with a black line on the top left site of monitor.
I can't see the password field. But if i type the password and press enter it's work and windows boot normaly.
Is there any solution to fix the boot screen of bitlocker?
I have tried to decrypt and encrypt the whole Partition - no change of behavior :/
thanks and greetz

RELEVANCY SCORE 200
Preferred Solution: Bitlocker - Screen is only lightblue without any fields

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Bitlocker - Screen is only lightblue without any fields

This issue is resolved with the final Update to Windows 8.1
After upgrade to 8.1, installing windows updates and reboot it is fixed.

The Bitlocker Screen now show the Password field ;)
thanks for your help

Read other 8 answers
RELEVANCY SCORE 66

First off, this is my first time on these forums, and i'm not sure if it's in the correct ones, so if an admin can move it or something? thx,

Allright, so about 2 and a year ago i bought my MSI, which i've been enjoying quite a lot. I use it daily for gaming and school related work, but 2 days ago, the screen suddenly turned black (while gaming) and then said a kind of "RRRRRR" noise. I restarted it, and it worked fine again.

Today, the computer did the same thing 4 times, expect that the screen turned light blue this time. It still said the "RRR" sound, I update my drivers regularly, and i just updated them before it happened again. Restarting works by the way.

I'm using a MSI GT663R, with these specs:
CPU: Intel core I7-720QM
VGA: NVIDIA Geforce GTX 460m / 1,5GB DDR5
LED Panel: 15,6 FHD, 1920x1080 (Glare Type)
Ram: DDRIII 6GB (2GB*3)
HDD: 1TB (500GB*2 RAID 0) 7200RPM
RF: 802.11b/g/n

That's atleast what it says on the sticker on the PC, note that i'm not very good with computers and i'm really hoping to get a simple fix, because i don't want to use money to get it repaired if not necessary.

Thank you really much in advance, i really love my PC, and it was quite expensive, for what i earn, so i really hope it isn't broken or something similar

Picture: m.imgur.com/ATL0fdQ

-Helpatix,
(I'll be checking on here after school and stuff )
 

A:Computer Screen Turns Lightblue?!?

Read other 9 answers
RELEVANCY SCORE 64.4

Hey guys.

Got a new build here, Pentium extreme edition 965 3.73GHZ, FOXCONN NF4SLI7AA, OCZ SLI-ready ram(2x1gb sticks, dual channel mode), and a 500GB seagate SATA harddrive.

Had a hell of a time getting xp installed in the first place - I tried 3 different cd drives, different ram, and a different video card, and finally what did it was disabling the L2 cache in the BIOS.

Got through the install with no problems(though it seemed to take a lot longer than usual.), but then when the computer restarted, it just went to a black screen. I had to turn it off and turn it back on again, it booted up as usual(But again, took QUITE a while), and it got to a screen that said "Windows is restarting the installation....."

Then it just goes to a light blue screen and stays there. I let it sit there for a good 15 minutes to no avail.

Any ideas?

A:"windows Is Restarting The Installation..." And Then Solid Lightblue Screen.

Did you load the SATA drivers for your motherboard by pressing F6 early on in the installation process? (or, did you slipstream these drivers into your installation CD?)

If that isn't the issue, then I'd suggest resetting your BIOS to the default values and attempting to install XP again. Please post the exact error that you first get when trying to install it.

Read other 5 answers
RELEVANCY SCORE 48.8

I am trying to create links to specific locations with each document between two documents. The document names will change. I can update the current name of the other document by creating a custom property called "otherDoc". I have solved most problems, however, I am unable to insert a field into the address of the link (to make the link dynamic) without utilizing the showfieldcodes command (which is very memory and time consuming since the documents I am working on are very large). Below is my code. I was wondering if there is any way to set the address as a field? Or somehow input an address and it would be understood by word to be field.
Sub link_to_other()

'pastes hyperlink to the other document
Selection.PasteSpecial Link:=True, DataType:=wdPasteHyperlink, Placement:= _
wdInLine, DisplayAsIcon:=False

'selects the hyperlink that was just inserted
Set myField = Selection.PreviousField

'creates variables
Dim temp_address As String
Dim temp_subaddress As String

'sets variables
temp_address = ActiveDocument.CustomDocumentProperties("otherDoc").Value & ".doc"
temp_subaddress = Selection.Range.Hyperlinks(1).SubAddress

'changes the hyperlink the the dynamic value
Set SCut = ActiveDocument.Hyperlinks.Add( _
Anchor:=Selection.Range, _
Address:=temp_address, SubAddress:=temp_subaddress)
End Sub

 

Read other answers
RELEVANCY SCORE 48.8

Hi all,

I?m really in need of some help from some Access experts! I?m a newbie to Access, but I got myself busy with quite a big project... I?m trying to map out the product supply to shops in the whole country. I?ve come quite far for a starter, but I keep having 3 questions, it would be great if you could help me with this!

I have, amongst other tables, two tables called Stock_counted and Reported_quantity.

The table Stock_counted has the following fields:
- Shop_number
- Product_code
- Quantity_counted

The table Reported_quantity has the following fields:
- Shop_number
- Product_code
- Quantity_in
- Quantity_lost_or_returned
- Quantity_out

1. What I would like to do is to make it one table based on Shop_number AND Product_code. So in one record I would like to have Shop_number, Product_code, Quantity_in, Quantity_lost_or_returned, Quantity_out and Quantity_counted. How do I do this, making sure that the quantities end up behind the right product and shop? It is possible that some shops don?t have all items, while other shops might not have all products reported, or both. On top of that, I have another table with a price for each product, which needs to be related to it as well.

2. It happens that some products are found more than once in one specific shop and therefore appear more than once in the table, with the same shop number and product code. How do I automatically SUM these quantities, so that this product only shows up once per shop?

3.... Read more

A:How to combine fields in Access 2010 based on 2 equal fields?

  
Quote: Originally Posted by Josephine87



2. It happens that some products are found more than once in one specific shop and therefore appear more than once in the table, with the same shop number and product code. How do I automatically SUM these quantities, so that this product only shows up once per shop?



select shop, product, sum(quantityfield1), sum(quantityfield2)
from sometable
group by shop, product

Read other 1 answers
RELEVANCY SCORE 45.2

Our organization requires Laptops to be Encrypted with a PIN #. One of our Laptops is giving me trouble. I have Bitlocker turned on and fully encrypted and have require Startup PIN with TPM in the Require additional authentication at startup in GPEDIT. I also have the Enable use of Bitlocker Authentication Requiring preboot Keyboard input on Slates enabled. When turning on the Laptop Bitlocker comes up with the light blue screen where you enter the PIN but the screen is blank. It doesn't say Bitlocker or have a box to enter the PIN #. Now I can just type the pin # and press enter and it works and loads windows as normal. I obviously can't give this Laptop to a user like this.

Anybody have any suggestions as to a resolution to this issue.
Thank You.

Read other answers
RELEVANCY SCORE 45.2

I enabled PC Tablet Support in the windows features section of windows 7, but i still can't get windows to pop up that on screen keyboard icon that usually displays next to any type of data input fields.

My windows is NOT installed on a tablet pc, but i recently connected a touch screen to my desktop and am hoping to get the same sort of functionality like my tablet edition of xp had.

Anyone know how to make that shortcut icon appear again?

A:On screen keyboard icon shortcut not showing next to text input fields

Try a few things. Start> Type in search box

Ease of access

Click on Ease Of Access Center in results above

2 possibilities

Use the computer without a mouse or keyboard

or

Start On-Screen keyboard

A Guy

Read other 1 answers
RELEVANCY SCORE 44

Hi,

I got a form A and a subform B. I use B to display data retrieved from a table while use B to simutaneously update that data. More particularly, if I click a row in B, that row will be display on A and the user will be able to edit that data. The forms were designed by someone in MS Access 97. I converted it to MS Access 2003 format. Therefore, I have to link form A and form B. However, I couldn't find Link Master Fields and Link Child Fields in MS Access 2003!

Any ideas? Thanks in advance!
 

A:Link Child Fields and Link Master Fields in MS Access 2003

climbingrose said:

Hi,

I got a form A and a subform B. I use B to display data retrieved from a table while use B to simutaneously update that data. More particularly, if I click a row in B, that row will be display on A and the user will be able to edit that data. The forms were designed by someone in MS Access 97. I converted it to MS Access 2003 format. Therefore, I have to link form A and form B. However, I couldn't find Link Master Fields and Link Child Fields in MS Access 2003!

Any ideas? Thanks in advance!Click to expand...

It really sounds like form A and subform B are both using the same table, and are not a Master/Child field link situation. But rather, form B (the subform) will have code in the "On Current" event that will find the current record on the form B within the form A, therefore allowing that record to be edited. Review your original post, I think you used the "B" one place where you meant to say "A". No matter what, you need to clear up with us out here if both form A and form B are using the same table.

Vic
 

Read other 1 answers
RELEVANCY SCORE 44

I am trying to find a way a edit the bitlocker text that appears if I don't have my USB key plugged in. I hate the fact that it says my drive is encrypted with bitlocker and here is the key it is looking for.

I just want to change it to say something to the order of "You are not getting in without correct permissions!", or "Stop trying to steal my data!"

Something other than Microsofts default text would be preferred.

Thanks in advance.

A:How do I customize the BitLocker key screen txt?

  
Quote: Originally Posted by 2kx2


I am trying to find a way a edit the bitlocker text that appears if I don't have my USB key plugged in. I hate the fact that it says my drive is encrypted with bitlocker and here is the key it is looking for.

I just want to change it to say something to the order of "You are not getting in without correct permissions!", or "Stop trying to steal my data!"

Something other than Microsofts default text would be preferred.

Thanks in advance.


Screen shot please. Kinda hard to search for text without knowing what it is!

Read other 3 answers
RELEVANCY SCORE 43.6

I am resetting my surface pro 3 to factory reset. it lock me out to bitlocker key. it shows me the key id. how can i retrieve the bitlocker key?

Read other answers
RELEVANCY SCORE 43.2

Hi,

I have a new computer (2 months old) but recently it started exhibiting a strange problem. Sometimes when I let the computer stay on with the Bitlocker log-in screen, it suddenly shuts off. The PSU is the Evga Supernova 1000G2 1000W and it should be Haswell-compatible.

- The temperatures are normal (CPU cores around 30-40 C, GPU also normal).

- sfc /scannow says that there are no integrity violations.

- I have already done a chkdsk /F on the boot drive.

- At boot and while Windows is not fully loaded, the gpu fans seem to spin full speed, so I thought: maybe the gpu is defective and can't handle full fan speed. Ran an OCCT stress test, and eventually the gpu fans spinned at 3000 rpm, the temp around 80 C, but no errors, no sudden shut-offs, not even after minutes in this state.

- Computer is stable while in Windows, doesn't suddenly shut off when the OS (Windows 8) is fully loaded.

This problem is a mystery to me. It can't be the power button case malfunctioning, because then it would also have to happen in the OS fully loaded sometimes, but that (up till now) never happens, while it happened multiple times in the Bitlocker log-in screen.

Oh, and one more thing: I ran MemTest, 4 successful passes, no errors.
 

A:Sudden shut-off at Bitlocker log-in screen

Read other 12 answers
RELEVANCY SCORE 43.2

I have an older Laptop that operates on  Windows 7 Ultimate,I have the Bitlocker Drive Encryption on and encrypted for Drive C:   I now started the process of encrypting my external usb hdd Drive E: which has a long way to go for it's large
size. During the encryption I needed to disconnect it so I paused the encryption like it says to do before removing or changing any files on it. I then plugged my drive into a newer laptop I have that operates on Windows 10,. I was prompted for the Bitlocker
Drive Encryption Password screen like normal just like on my Windows 7 laptop so I enter the password and it was correct and it began the encryption process again. When I finished with what I needed to do on the Windows 10 laptop I paused the encryption again
and disconnected the drive. I am now back on my Windows 7 Ultimate OS and plugged the drive in, Bitlocker Encryption Password Screen comes up again and I entered my password but now for some reason it's saying the password is incorrect?  "But It's
not incorrect",is there a reason why this has happen and a way to fix it? My second issue is that I have the recovery key written down on paper but on the fifth line of the eight lines that makes the recovery key I left out a number,did not write it correctly,
there for I cannot just reset my password using the key and get back to normal again. Any way to find the lost number to the key? As I do have the rest of it written correctly please help tha... Read more

Read other answers
RELEVANCY SCORE 43.2

Hi
After rebooting one of our test machines, bitlocker wanted the recovery key.
There were no hardware modifications on that machine.
Error message in event log:
Bootmgr failed to obtain the bitlocker volume master key from the TPM because the PCRs did not match
Event id 24635, source bitlocker-driver
 Each time the machine starts, the recovery key is needed.
Any idea how to solve that issue and why it happens?
update:
Second partition was created manually on that machine. So that's clear that bitlocker reacts...
But now: how can I confirm those changes so that the recovery key is not needed each time we boot?

A:Bitlocker enabled drive, recovery key needed during boot, PCS did not match, event id 24635, source bitlocker-driver

Hi,
 
I would like to confirm if BitLocker accepts the recovery key?
 
Please update the BIOS to improve the stability for TPM first.
 
I also would like to suggest you disable and enable BitLocker again to reset the settings.
 
For more information, please refer to the following link:
 
http://technet.microsoft.com/en-us/library/dd835565(WS.10).aspx
 
Regards,
 
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
 Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 8 answers
RELEVANCY SCORE 43.2

MS Access:
I have several fields in a form that uses two tables. I would like to set up a command button so that when you are on a current record, it will copy the field information from the record you are on to other fields in the same record. I do not know the SQL commands to set this up.

For example, there are name fields, address fields, and phone to be copied. Reason: One is contact information; one is survey information. In most cases the information is the same but on rare instances, the information needs to be entered (when different).
This is not an update for all records in the database. This is based individually on each record.
Not sure if you need to do On current, on click, or after update.
Not sure if default value in form can be used.
Please help.
 

A:Copy data fields in same table to other fields in same table MS Access

Read other 16 answers
RELEVANCY SCORE 42.8

I tried using HP BIOS Flashing utility on my HP Z400 Workstation, and it says it can't continue because I have Bitlocker enabled, but I don't have bitlocker on Win 7 Professional 32bit. I don't see it on the control panel or in context menus. I do see it set to manual in "Services" but the service in not running. Is there a way to find drives Bitlocked or are my drives being treated as bitlocked because of my antivirus program AVG?

A:BIOS flash error, BITLOCKER on? No bitlocker installed, Win 7 Pro

In the services window is there and option to disable or turn off...there should be. Just change the startup type from manual to disable and reboot. Then try your BIOS update.

Read other 5 answers
RELEVANCY SCORE 42.8

Hello and good afternoon, I have a issue where a manager started the Bitlocker process on the SD card in his Surface Pro 3

with Windows 8.1. The Bitlocker attempt failed at 3.4% completed but the SD card ended up being Bitlocked without providing the Bitlocker Recovery Key (I've never seen this happen before). He doesn't know the password for the SD card and of course
I've been tasked to somehow release the encryption so that he can get the required information off of the SD card. 



Is there anything that can be done to release the encryption on the SD card or has the SD card been made non-accessible moving forward?

Read other answers
RELEVANCY SCORE 42.8

The situation:

- first time setting up Bitlocker on a desktop for the C: drive
- enabled Bitlocker without TMP security through group policy + set-up a pin code
- pc has "Fast Boot" setting turned on

Problem:
- on reboot Bitlocker screen appears asking for PIN code. BUT, USB keyboard does not function.
- I cannot enter the PIN, I cannot enter BIOS

Tried all available usb ports on the tower to no avail. Have been searching the internet, but so far the solutions are: "try the on screen keyboard" (no can do, this is not a Surface), or "go to BIOS" (no can do, keyboard not working
during that step of the boot up presumably due to Fast Boot), or "change X setting in group policy" (no can do since I can't get past Bitlocker screen).

Very much in need of help as desktop is currently unusable. Thanks in advance

Read other answers
RELEVANCY SCORE 42.8

We've had a few HP 1020 and 1040 models in recently and all have the same issue. When the laptop is docked, the external keyboard does not work in the Bitlocker screen. It works in BIOS and in Windows itself, but not in Bitlocker. This means we have to open the laptop screen to input the Bitlocker PIN, then leave it open and GPO dictates that the machine hibernates when the lid is closed. We have tweaked the GPO, but to no avail. ANyone else seen this or have a solution?










Solved!
View Solution.

A:External keyboard not working in Bitlocker screen

if the bios is up to date, i would look at BIOS settings. I believe Fast Boot setting is Enabled in your case, which might cause usb devices not to be seen at the stage Bitlocker requires

Read other 5 answers
RELEVANCY SCORE 42.4

A couple of weeks ago I posed a question HERE regarding how to tell whether Windows 10 Mobile device storage was actually encrypted and if so where were the recovery keys stored. The good news, is that the device storage is indeed encrypted when turning 'Device Encryption' on. The bad news is that I still don't know where the recovery keys are stored and it can permanently lock you out of your device.

Earlier I reset a Lumia 630 running Windows 10 Mobile 10586.36 (Settings > System > About > Reset Phone) and when it restarted I was faced with a blue Bitlocker Recovery Key screen. The problem being, that it's a Desktop Bitlocker Recovery screen and as this is a mobile device it's completely useless as you can't do anything with it, it just locks you out of the device. Hard-resetting the phone (Volume Down and Power buttons) doesn't work either, it just reboots the device to the Bitlocker screen again.


All is not lost though, as it's possible to Flash the phone back to the original OS by running the 'Windows Device Recovery Tool'. When connecting the phone to the PC and running the Device Recovery Tool, the tool doesn't recognise the device though with it in it's Bitlocker Recovery state and just shows the Firmware and OS as 'Unknown'. So you then need to click on the 'My Device Was Not Detected' button and follow the on-screen prompts. After a few restarts, it will then flash the phone back to the original Windows 8 OS. Bit of a pain, but at least not to... Read more

A:Windows 10 Mobile Bitlocker Recovery Key Blue Screen

It seems Microsoft may have fixed this issue in Windows 10 Mobile build 10586.107






"Improvements to the device reset experience when BitLocker\Device Encryption is enabled by enterprise policy or by the user."

Read other 0 answers
RELEVANCY SCORE 42.4

I was using my Dell laptop today. All of a sudden the OS just shut everything down quickly and shut down. There was no error or anything like that. It just shut down.

Upon booting, I was given a screen to enter the bitlocker recovery key. I tracked it down and entered it into the laptop. The laptop then tried to boot, but blue screened. In typical MS fashion, the blue screen showed for about 1/352352th of a second so I couldn't get any real information about the error.

I tried the boot system recover option that the os presented. I tried the option to recover from the last recovery point or to recover the other way. Each time the system booted back to the same problem.

Does anyone have any idea of how I troubleshoot this? I'm lost. Thanks for your help.

A:System shut down, now bitlocker screen and windows won't start

Welcome

See if these tutorials are of any help to you:
Troubleshooting Windows 7 Failure to Boot
Troubleshooting Steps for Windows 7

Read other 4 answers
RELEVANCY SCORE 42.4

I installed several E6330 with Win10 Enterprise and BitLocker encryption.

When the laptop is docked in the keyboard stops working at the BitLocker password screen. Before that (BIOS) and after that (Win) the keyboard works. 
To top it all the error is inconsistent in it's behavior. Some times the keyboard works for a little while, most of the time it doesn't work from the start. I tried different Fast Boot options but changing those does not help.
Anyone here with similar problems or who even solved this for his systems?

Read other answers
RELEVANCY SCORE 42.4

Recently We order some model "TOSHIBA Z20T-C".Our company policy have to enable Windows bitlocker function.
I have a problem. I can't input bitlocker pin on screen keyboard when I power on the tablet or normal model .
Model "Z20T-B" is no problem.

PS:Portege Z20t-C
P/N : PT16BT-01T04Y
BIOS Version : 5.50
EC Version : 1.30
OS:Win10 or Win8.1

Read other answers
RELEVANCY SCORE 42.4

I'm trying to help my daughter who is away at college with her XPS 13 laptop purchased June 2017.  It's running Windows 10 Home.  She took it out and opened it up after class and a blue screen with BitLocker looking for the recovery key was present.  From what I've read, bitlocker isn't available on the home version, only pro and enterprise.  She can't enter the recovery key since it was never turned on, even if it was available.  I told her it will probably need to be reformatted since it's looking for something that is not available.
Has anyone seen this before? Any recommendations?  She's taking it in to the tech center later today.
I forgot to add that when she goes to her Microsoft account and looks at her devices is shows Windows 10 home AND BitLocker ON, although it was never activated.  The "Get BitLocker recovery keys" link brings her to her Onedrive account.  She says she doesn't see the recovery key anywhere on her OneDrive account.
Thanks,

George

A:Bitlocker recovery screen on Windows 10 Home version

Have her go to the link and expand the how to get recovery keys.
She might be able to go to her Microsoft account and search for Recovery Key.
support.microsoft.com/.../windows-8-bitlocker-recovery-keys-frequently-asked-questions

Read other 7 answers
RELEVANCY SCORE 42.4

We have a few computers running Windows 8.1 Pro Update 1 here. For some reason my machine has a black and white DOS-style unlock screen for BitLocker.

Another computer we have here has a modern-style, Windows 8 looking, light-blue & white unlock screen for BitLocker.

Why has my PC defaulted to this older looking UI? Is there any way to change it?

A:How To Enable Blue Bitlocker Unlock Screen At Startup

Hello Rotom, and welcome to Eight Forums.

Double check to see if the tutorial below to enable the newer Windows 8 startup screen may be able to help with this as well.

Startup Options - Enable or Disable in Windows 8

Hope this helps for now,
Shawn

Read other 3 answers
RELEVANCY SCORE 42

I turned on Bitlocker on three new Windows 8.1 laptops and saved the 48-digit recovery keys and associated identifiers, but I forgot to indicate which laptops they are associated with. Is there any way to find the identifiers/recovery keys on my laptops so I can document this? Or do I have to decrypt the laptop drives, turn off Bitlocker, and start all over again to generate new identifiers/recovery keys? My only options under Manage Bitlocker are Suspend protection, Back up your recovery key, and Turn off BitLocker.

A:BitLocker Identifier generated after turning on Bitlocker

Hello Edwin, and welcome to Eight Forums.

No worries. If you should ever need to unlock to drive, it'll provide you with a recovery key ID number that you can use to ID which recovery key to use. The tutorial below can give you more details about this to help get an idea if ever needed.

BitLocker Recovery - Unlock a Drive in Windows 8

Read other 5 answers
RELEVANCY SCORE 42

My BitLocker password is not working after format my c drive. instead i have my recovery that is also not working.
Please somebody help me to unlock my disk.

Read other answers
RELEVANCY SCORE 42

Hi,

i am noticing that when my pc starts up as the C drive is encrypted with bitlocker when i enter the password the bitlocker screen is only light blue yet i am still able to enter my password and login the screen just displays light blue, picture is in below link

http://lookpic.com/O/i2/579/Vd12lCW4.jpeg

any help to make it show the normal screen would be appreciated.

A:Bitlocker displays light blue screen on system startup

Can you do a print screen and post it. The link you provided states it is forbidden.

Read other 3 answers
RELEVANCY SCORE 42

Hi Team,
We see that computers are getting turned ON on Monday automatically and would show bitlocker recovery screen.
Logs show an event as below after the shutdown log ends. There are no event logs shown in between the shutdown event and Bitlocker event shown below.
Bootmgr failed to obtain the BitLocker volume master from tpm Event ID: 24636
I dont see any scheduled tasks triggering the startup.
Wake ON LAN option is disabled (Unchecked).
Troubleshooting done are as below

1-Suspend bitlocker - Restart PC.
2- Resume Bitlocker if not auto resumed.
----- Above did not help , so performed below steps

1- Suspend Bitlocker.
2- Decrypted the drives.
3- Updated BIOS and chipset.
4- Verified BIOS - whether Primary HDD is First boot device.
5- Re-encrypted the Drives.
__________________________________________________
We dont know what causes PC to turn ON itself and go to the recovery screen,
And also let us know if there is any way to find out exactly what triggered Bitlocker to go to recovery Mode.
Please help regarding this issue.
Regards
Srinidhi

Read other answers
RELEVANCY SCORE 42

Hi,

i am noticing that when my pc starts up as the C drive is encrypted with bitlocker when i enter the password the bitlocker screen is only light blue yet i am still able to enter my password and login the screen just displays light blue, picture is in below link

http://lookpic.com/O/i2/579/Vd12lCW4.jpeg

any help to make it show the normal screen would be appreciated.

Read other answers
RELEVANCY SCORE 41.6

Hi all,

I've enabled BitLocker (Win 10 Pro) on a Dell laptop Inspiron 5558 and all went well.

BUT.... When I power on the computer the familiar light blue BitLocker screen appears but there is no prompt to enter the key. Just a light blue screen, nothing else whatsoever. However, I can enter the BitLocker key (blind, of course) and then viola Windows boots up properly! So BitLocker is working.

I would normally suspect a display driver issue but the BitLocker code happens long before any device-specific display driver would load (right?). Anyone else seen this or have suggestion on what to do?

A:BitLocker normal light-blue screen but no unlock prompt. Still works!

Same Happening on a Windows 10 installed Dell Vostro 2520.
Also being reported over on the MS forums:
http://answers.microsoft.com/en-us/w...8bc3e62?page=2

Read other 3 answers
RELEVANCY SCORE 41.2

Dear Sirs! I have encryptrd system windows disc with Bitlocker., The access method is flash drive. .The encryption works normally. But I eject the flash drive and reboot the comp, the only  empty blue screen appears. and the comp  reboots
in 2-3 minutes.  This means I can not to restore access from the bitlocker key, if the flash? for example, will be broken.. Please write me how to solve it.

Read other answers
RELEVANCY SCORE 40.4

Initially I found that BitLocker on the Go supported removable media like flash drives and external drives. Why isn't a CD/DVD supported since it is considered removable media? Will this support be available in future releases?

A:Will BitLocker or BitLocker on the Go ever support CD/DVD encryption?

Hi,
 
Bitlocker to Go is not supported on CD/DVD. Your suggestion is valuable, I will forward this information to the appropriate department through our internal channel.
Both the Microsoft Product Team and Development Team will take into consideration all suggestions and feedback for future releases.
 
Currently, you may need third party software to encrypt CD/DVD.
 
Best Regards,
Niki
 
 Niki Han
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 40.4

Just been out today taking some shots of the flooding in our valley. I seem to come across a common problem which I will describe as follows:

One shot will turn out with very nice bright foreground and bright fields but the dark, moody clouds turn almost white too - ruining the shot.

The other will come out with a great, dull cloudy sky but the fields and foreground are too dark to make out details like farms etc - again ruining the shot.

I can't get no happy medium. I use a Panasonic DMC FZ-5 and although it is no digital SLR it does me well for what I can afford.

Is there anyway I can correct my shots afterwards? Is this what HDR does?

I have taken two shots at different settings, one with perfect clounds and one with perfect fields. Can I correct the photo and blend the two problems?

Hope this makes sense!

thanks
 

A:Landscape - clouds bright / fields bright OR clouds atmospheric / fields too dark

Read other 16 answers
RELEVANCY SCORE 40

Hi Mr/Ms
I
flash
drive encrypted
with BitLocker 
I used
this
driver for three months my computer is broken I bought a new computer    when i was try my flash disk new computer its give me this  problem 
BitLocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected
? know my passworrd but I do not know
the BitLocker
recovery key what can i do know pls some one help me 

Read other answers
RELEVANCY SCORE 39.2

Having an issue with all Dell 7510's and associated docks we've deployed to new users at my employer. The external keyboard won't work at the Bitlocker prompt. These PC's are imaged for Win10.
I've sifted through the BIOS settings and have had no luck getting it to work. One thread I found said to make sure the Post Behavior -> Fast Boot setting is set to Thorough. Verified that is the case.
Note: if I undock and dock the PC the external keyboard will work that 1st time at the bitlocker prompt, but at next reboot it doesn't work.

Read other answers
RELEVANCY SCORE 38.4

 The windows 10 Pro computer has died, and I would like to put the in my new computer with windows 10 home.   I would like to remove the bit locker password,  so I can reinstall windows 10 pro while keeping my files and apps,  
I'm unable to do this while the drive is encrypted.  How do I remove drive encryption from the drive while I have the drive slaved to a windows 10 home computer? 

Read other answers
RELEVANCY SCORE 38

Hello there

So I'm experiencing strange BitLocker behaviour. I have this PC at work. Clean Windows 8 x64 installation, 3 HDD (AHCI), no SSD.

After I set up BitLocker to encrypt "C" partition, it gave me pop-up window, that I should restart PC to test the BitLocker loader. So I clicked Yes. And after few seconds I got this:



Mind, I'm still ABLE TO type password (i can't see sh** though), after I hit enter Windows IS booting, but it's really weird to see above picture instead of:

(at my home PC).


My GFX is OK, I tested it with games, benchmarks etc.

Any thoughts people?

Kind Regards

Bart

A:VERY strange BitLocker "enter password" startup screen

Up, anyone?

Read other 1 answers
RELEVANCY SCORE 37.6

I am trying to enable BitLocker on a Windows 7 Ultimate x32 system with TPM. I follow the Wizard and when asked to encrypt the drive I select 'Run BitLocker system check' and 'Continue' (see attached sreenshot).
The USB is inserted and contains the recovery key (.txt and .tpm). During reboot I get:

Windows BitLocker Drive Encryption Information
The system boot information has changed since BitLocker was enabled.
You must supply a BitLocker recovery password to start this system.
Confirm that the boot changes to this system are authorized.
If the changes to the boot system are trusted, then disable and re-enable
BitLocker. This will reset BitLocker to use the new boot information.

Otherwise, restore the system boot information.

ENTER=Continue

Windows then continues to start normally. After login I get an error message: BitLocker could not be enabled (see attached screenshot).
When I check TMP it shows as active, initialized and owned.

I've started out from scratch several times - same results. I can't figure out what the problem is.
This is driving me nuts.

Any help appreciated

Thanks

A:Bitlocker: BitLocker could not be enabled

BIOS: A06
DELL: d420
Hard drive: System reserved 100MB NTFS, 27.84GB NTFS

TPM
Manufacturer name: BRCM
Manufacturer version: 2.10
Specification version: 1.2
Status: The TPM is on and ownership has been taken

I've since modified the group policy settings for Bitlocker to use a PIN.
I am still getting the same results.
I follow the wizard, select check the system, reboot, enter PIN, get the same "error" messages as shown in my previous post.

This makes no sense.

Any help?

Read other 6 answers
RELEVANCY SCORE 34

Hello there

So I'm experiencing strange BitLocker behaviour. I have this PC at work. Clean Windows 8 x64 installation, 3 HDD (AHCI), no SSD.

After I set up BitLocker to encrypt "C" partition, it gave me pop-up window, that I should restart PC to test the BitLocker loader. So I clicked Yes. And after few seconds I got this:

JPG IMAGE - http://www.eightforums.com/attachments/f1/f2/22871d1370880908t-very-strange-bitlocker-enter-password-startup-screen-5jkippr.jpg

Mind, I'm still ABLE TO type password (i can't see sh** though), after I hit enter Windows IS booting, but it's really weird to see above picture instead of:


My GFX is OK, I tested it with games, benchmarks etc.
BitLocker simply cannot, for whatever reason, use my video card properly and displays those weird lines. After all - it hasn't loaded the whole Windows yet. Than again, it IS a bit strange, as Windows installers tend to work fine.


Any thoughts people?

Kind Regards

Bart

Read other answers
RELEVANCY SCORE 34
Q: fields

Can someone please help me!... I'm trying to clean up my information fields on the net. You know the ones that are use when filling out apps for job.. ie names, address, towns and such. If there a way to clean all that off.
Please help me...
Thanks
Rstoner
 

Read other answers
RELEVANCY SCORE 34

Could an mobile electromagnetic field damage computer parts if it were place in vecinity of a computer.........??
 

A:About EM fields?

Yes, especially wireless modems
 

Read other 3 answers
RELEVANCY SCORE 34

I was trying to set up my fields for ACT 2005. I screwed up and somehow now I can't edit the first and last name field. I deleted the contact field from the layout.

I need help on how to make them editable again. I have been searching and can't find any answers.

Thanks.
 

A:ACT - need help with fields

Dunno if it's a bit late... you can't edit First/Last Name fields - they are used by parsing the Contact Name field to enable searching and not supposed to be used on their own. They can also be used when importing if the import data has this info in 2 fields, and will combine them in the Contact Name field.
 

Read other 1 answers
RELEVANCY SCORE 33.6

My frnd is facing a problem that when he logs onto the net and tries to add his username and password in the respective fields he is unable to do so and there is no cursor in the field wen he clicks on it

A:My fields not working

Are you talking about login email, forum, some blog?
If so, maybe you can reinstall or reset your web browser.

Read other 1 answers
RELEVANCY SCORE 33.6

I need to be able to remove the same field within a few hundred entries in a windows application. In Family Tree Maker I need to be able to remove the "Page" field in every entry I have for every individual.

Is there a way to create a batch file or is there some app available that will allow this?? The program itself has no options to allow for this.

D.
 

Read other answers
RELEVANCY SCORE 33.6

Hi. As i type this im unsure that i will ever be able to read it if i log out. I have allowed members to send me E-mails if they might have seen this type of problem before. Let me explain.

It started when my Warcraft account got hacked. Blizzard Entertainment Locked the account when the hackers tried to move my characters to another rhelm. Paypal denied the money request. The account is restored but i have still not accessed it yet because i wanted to be sure all malware/ viruses were removed from my computer. I run PC tools Spy Doctor.

First symptoms of real trouble started when i went to change all passwords to other accounts. I used my Roomates computer that we know is clean to do this. I scanned mine fully twice using the Spy Doctor and Malware bites and it came back clean. I tried to access my paypal account using my computer and the password would not work. I emailed them a reset request. Didn't work. Tried my credit union account, invalid password. Went to my roomates computer and these same passwords logged me right in.

So I Nuked My computer. Full factory reinstall, as new, out of the box. First thing i did after it was done is reinstall spy doctor. But now i need to re-register it so it can do it's full job. I send for the license code, they give, Don't work. I try to goto my PC tools account, Invalid password. I send for another reset. And it don't work. but these still work on my roomates computer. THis is AFTER I did a full reinstill.

The O... Read more

A:Password Fields

It can be your IP adresse has been blocked by that transferswebsites because they detected that your PC was infected.To be sure there is no infection: Just follow the steps on http://www.bleepingcomputer.com/forums/topic34773.html (Preparation Guide For Use Before Using Malware Removal Tools and Requesting Help). When post your (Hijackthis log +) DDS Log: Be patient, it's very busy at this forum. A professional expert will view your logs and will help you with that problem. Do not use tools (like ComoFix) without professional experience/helper.Good luck.

Read other 2 answers
RELEVANCY SCORE 33.6

Where does a person learn MS access. I have the book that comes with the program but 75% of what I want to do is not in there. I learnt the basics of the program from the book only. Every time I need to know something a little advanced I have to come to this web site.
Anyway I have another question. I have a database called "Petty Cash" with about a 10 records in it and I would like to show all the records in a report, even null value fields or zero fields. For example one of my records is "gas" the child fields are (I think that is the right terminology) "Amount", "Tax" & "Total" but they do not have any values for this month so they do not appear in my report. Also if I have a caluclation in some fields and if the value is zero it does not show any thing, cant I make it show zero dollars by default?

thanx again memebers.
 

A:Null or Zero value fields

Read other 10 answers