Over 1 million tech questions and answers.

S540 Touchpad not working

Q: S540 Touchpad not working

The Touchpad on a cliŽnts S540 is not working anymore. It started with complaints about non-responsiveness when the laptop woke from sleep (after being closed and opened).I've tried to install the latest drivers (18.0.7.99) from the Lenovo website but that didn't give a solution. The laptop is running Windows 7 Professional 64bit.

RELEVANCY SCORE 200
Preferred Solution: S540 Touchpad not working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: S540 Touchpad not working

Hi Niels84,

Welcome to Lenovo Community!

As per the query we understood that you are facing issues with Touchpad not working after resuming from sleep mode on your ThinkPad S540.

Please check with updating the touchpad firmware from the below link.

http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-s-series-laptops/thinkpad-s54...

Hope this helps.

Best regards,
Hemanth Kumar



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 6 answers
RELEVANCY SCORE 62.4

Just purchased a couple of days ago a Lenovo Ideapad S540 ( Type 81NE ) but getting problem with touchpad which is not responding. Drivers available through Lenovo Vantage updated but seems that touchpad driver is missing even from Lenovo support site.

Read other answers
RELEVANCY SCORE 54.4

The Camera on my device is not working, it used to work for a while in the beginning, no idea what caused it to stop as I didn't use it that often. HW ID: USB\VID_13D3&PID_56B2&REV_1711&MI_00W10 1809 ENT (17763.805) I've tried installing windows updates, the latest camera driver from Lenovo, rebooting etc, but keep having the same error image as uploaded in any software that uses the camera.  Obviously the hardware switch has no influence either, and I've ensured the W10 privacy settings are set to allow all apps to access the webcam. any ideas or should I RMA for warranty?  













Solved!

Go to Solution.

A:Camera not working on S540-15IWL GTX

Hi? welcome to lenovo forums. seems your Camera is disabled could you please check the Camera settings in Lenovo Vantage app? if it was disabled by Vantage?  Thanks,Sam

Read other 4 answers
RELEVANCY SCORE 54.4

The Camera on my device is not working, it used to work for a while in the beginning, no idea what caused it to stop as I didn't use it that often. HW ID: USB\VID_13D3&PID_56B2&REV_1711&MI_00W10 1809 ENT (17763.805) I've tried installing windows updates, the latest camera driver from Lenovo, rebooting etc, but keep having the same error image as uploaded in any software that uses the camera.  Obviously the hardware switch has no influence either, and I've ensured the W10 privacy settings are set to allow all apps to access the webcam. any ideas or should I RMA for warranty?  

Read other answers
RELEVANCY SCORE 54.4

I recently updated my os on my S540 from windows 7 to windows 10 and updated all drivers + bios. Now my shift keys are not working. I don't think it is a hardware problem, because they stopped working both at the same time. I used the keyboard test from the lenovo and it said everything is fine...Had the same problem on Ubuntu, so it isn't os related. Are there any known problems with drivers or the bios related to the keyboard of the S540?

Read other answers
RELEVANCY SCORE 54

I purchased a new Ideapad S540-14IWL recently but couldn't find a way how to connect a secondary display via HDMI. I use Windows 10 Pro. So far I've tried the following:- using different monitors;- using different HDMI cables;- installing newer and older Intel VGA drivers;- going through the Windows 10 video troubleshooter;- switching off the laptop and/or the monitor and powering them in various sequences (as suggested in a few articles I found on the Internet);- tried to switch to the second display using Win+P, of course. No matter what, Windows is not able to detect a connected display (even after I manually push the 'Detect' button). The display itself finds no signal. Surprisingly, the Lenovo diagnostics utility couldn?t identify a problem after running both the Display and the Display Interface tests. The laptop is flashed with the latest BIOS. I read other Lenovo models have similar issued when AHCI mode is selected in the BIOS rather than RST. However, switching to RST comes with a warning that the controller change will result in all the data being erased, which I can't afford.  Any help on that issue will be appreciated. 

Read other answers
RELEVANCY SCORE 53.2

Hello,I used my laptop for a couple of days and I couldn't get to make Lenovo performance mode (pressing Fn + Q to change fan speed) to work. I've seen this thread, but I don't want to risk installing wrong software. Anyone knows how to solve it without manually going to BIOS every time, and if that software is compatible with my laptop? Edit: I forgot to mention, whole software/drivers are up-to-date, both via Lenovo Vantage and via Windows Update (System version: Windows 10 Pro 1909 18363.476)

Read other answers
RELEVANCY SCORE 51.6

I have a ThinkPad S540 with a OneLink Dock (not Pro). It has work fine for several years until today. Power is getting through to the laptop from the dock but none of ports (USB, Network and HDMI) work. Ihave tried to install a new driver however, after installation I get the message:"Unable to execute file:C:\SWTOOLS\DRIVERS\TP_Onelink_Driver_v11019.exeCreateProcess failed code 740.The requested operation requires elevation". It looks to me like the Dock has died but somehow the power supply to the laptop can carry on while the cleve stuff has stopped working. Any help appreciated.

Read other answers
RELEVANCY SCORE 49.6

I use mouse usually so didn't realize this problem until I take the laptop out for work today. I have uninstalled and installed the latest touchpad driver, but it did not work. I cannot even see the touchpad device in the "device manager" or a touchpad option in "setting" Below are two screenshots. Any idea what's going on and how I should solve this problem? Many thanks!!!!

Read other answers
RELEVANCY SCORE 49.2

Until recently the touchpad used to work with the HP / Synaptic driver. 2 or 3 finger function worked and turn on / off with the orange light worked.  For whatever reason these functions don't work anymore and I don't find a driver on the HP Support site to download and install.

Read other answers
RELEVANCY SCORE 48.4

Hitouchpad on notebook not working on remote desktop without touchpad...vertical scroll....OKhotizontal scroll...not working on the notebook....touchpad, OK, (synaptics is there), hotizontal plus vertical ...OKon the desktop without touchpad, synaptics not therequestion:It is possible simulate touchpad driver on the desktop ? 

Read other answers
RELEVANCY SCORE 48.4

My touchpad stopped working; I rebooted and the touchpad worked until the password eas entered and stopped working when computer unlocked. Used MS mouse to access settings; found the touchpad was turned off! Turned it to on position and it is working fine! How did ths happened?

Read other answers
RELEVANCY SCORE 44.8

Hi all Recently I have got a Lenovo V330-15IKB (Model 81AX) and how in my job the compatibility force me to keep the OS as Windows 7, I chosed this laptop because I have seen that still have drivers for Windows 7.I begin install Windows 7 x64, took drivers from Lenovo site, but surprise, first at installing from USB when first didn't work from beginning the touchpad but didn't want to continue install because of USB drivers.I managed to install Windows 7 finally, but the drivers for Touchpad didn't want to work at all, whatever I try.The same is also the drivers for graphical card, nothing works!!!May I have some help to manage these two things working under Windows 7 x64? Many thanks in advance.

A:Lenovo V330-15IKB TouchPad not working in Windows 7 and video card drivers not working

You can try a program called DriverBooster. It can update/install missing drivers and replace faulty drivers. All of the drivers on the program are Microsoft WHQL tested and approved which means they are safe.

Read other 1 answers
RELEVANCY SCORE 44.4

As you can see there are multiple problems that have come up in this notebook. I recently reinstalled windows 10 to solve some other problems. The installation went perfect and afterward everything seemed to work fine. When my wife turned it on the blue BIOS screen came on (as it did before the installation) and I was unable to use the touchpad, mouse or arrow keys to move the selection. I rebooted and it started up fine only the keyboard did not work. I had to use the onscreen keyboard to log in. Once inside, sometimes the keyboard works and sometimes it doesn't. I've tried using the f6 to toggle the touchpad on but it didn't work. The keyboard is touch and go and now the blue screen BIOS sometimes comes up when the computer is started. Any suggestions would be appreciated. I've searched for solutions and haven't been able to find anything that works to solve these problems. I've uninstalled the drivers and rebooted for a fresh re-install of the drivers but that only temporarily fixes the problem. Thank you.

Read other answers
RELEVANCY SCORE 44

Hello, I have a lenovo thinkpad L450, windows 10 - 64 bit OS. Recently after a systemreset, my touchpad is not working properly. Touchpad click is not working but tap function works fine. Trackpoint option is also disabled and i'm not abloe to enable it even from BIOS settings. I have also tried installing synaptics driver, but didnt help. Any suggestion or advice would be helpful. RegardsAkilan 

Read other answers
RELEVANCY SCORE 44

Hello,My touchpad and the red mouse thing stopped working. The keyboard works fine tough.I did a docking station hard reset and installed the suggested Firmware Update. I detached and reatached the Display several times.The drivers should be up to date.The ThinkPad was never dropped or got in contact with any liquid or so on.Thanks for any help,bio4ema

Read other answers
RELEVANCY SCORE 42

Not really sure what genre this problem should be on. However i have recently purchased a Fujitsu Siemens Amilo Li2727 notebook. Working fine when i got it but i decided to use a usb mouse instead of touchpad now the touchpad has stopped working entirely even when usb mouse id plugged out. i really want to resolve the problem. i have already gone onto control panal, mouse but the touchpad does not come up as a device. Any help appriciated thanks.

A:Touchpad not working, usb mouse does, touchpad never works even w/o usb mouse

Hello Tristan,

Welcome to the forums.

Been a while since I had a laptop, but I seem to remember there being a setting on what to do with the touchpad when the mouse is plugged in. Unfortunately I don't remember where and have no way of finding it.

Have you tried rebooting with the mouse unplugged?

Sorry I can't be of more help. The manual for the laptop ought to have that info in it somewhere.

Gary

Read other 5 answers
RELEVANCY SCORE 40.8

I am currently using an acer travelmate b tmb115-mp-c6hb and I had to replace the harddrive. After I replaced the harddrive and installed windows 10 my touchpad doesn't work. When I open Mouse Properties and click on hardware there is nothing lised under the devices. How do I fix this?
 

Read other answers
RELEVANCY SCORE 40.8

My touchpad isn't working even I installed updated driver. Please help!! 

Read other answers
RELEVANCY SCORE 40.8

Hi!

So my touchpad has suddenly stopped working. Also, my touchpad hotkey does not work either - no image pops up like with the other fn buttons.. I've updated drivers for both the touchpad and hotkey, but to no avail!! Any ideas??!!

My machine is an ASUS UX301L NotebookPC.
 

Read other answers
RELEVANCY SCORE 40.8

Hi, I have a i5-4210U CPU. My touchpad turns itself on and off. It doesnt happen periodically, its entire sections when I am using the computer. And other days it works normally. I have tried every tip from forums: double click the top left corner of the pad (the light is not glowing at all), I have tried to update the software to the latest version, I have tried to restore to a pervious version, I have tried to uninstall and then installing the touchpad again. Nothing works, and it gets very annoying not knowing if it works every time I turn on my computer. Can someone help me?   

A:Touchpad working on and off

Hi there @Carel, May the Forums be with you!  It is a great place to find the help you need, from other users, HP experts, and other support personnel.  I understand that your touchpad on your computer is not working properly.  I am happy to help with this. Please post the full product number for your computer. See the following, if you need help with that information.  HP Desktop PCs - How Do I Find My Model Number, Serial Number or Product Number? For now please see: HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10) Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

Read other 1 answers
RELEVANCY SCORE 40.8

Hi, I bought refurbished HP Elitebook Folio from States. From Day1 the touchpad is not working, I am  using external mouse for timebeing. Please resolve this ASAP. I am based in Montreal (Canada)

Read other answers
RELEVANCY SCORE 40.8

Hello everyone, I'm new in this forum.It's for a few days now that I encounterd this annoying problem: the touchpad in my Lenovo B50-10, which let's say in his life has given me more problems than I always could have expected, is just not working anymore. I tried to look for new drivers, but it seems that's the new one installed. I can move the pointer only using an external mouse. Will you help me, please?

Read other answers
RELEVANCY SCORE 40.8

Hello There, As the subject says, the touchpad from my notebook is not responding. And when i want to install the driver, i get a error (No appropriate driver to be installed).When i run Speccy, the mouse/touchpad is not on the list. What can i do ? 

Read other answers
RELEVANCY SCORE 40.8

hello sir , i just upgraded to windows 10 pro  and installed all the driver's and they are working perfectly except the touch pad  , i have installed the touchpad driver from hp support website but still it is not responding . i have tried all the third party software  but still it is not working.  i have installed stub32i.exe(original file name)or (file name:- sp71867.exe ) driver from hp website but still the problems remain's. please suggest me a perfect driver for my notebook. model name:- hp stream notebook-11 -d010wm (ENERGY STAR) 

A:Touchpad not working

Reinstall the Intel Serial IO Driver without Connected Standby Support chipset driver as mentioned here.

Read other 1 answers
RELEVANCY SCORE 40.8

When I open my laptop this evening my touchpad stoped working no cursor was there on screen and no light was on near to touchpad and I also tried hard reset but it didn't helped meCan you help me

A:Touchpad not working

Hi crdikshanta,Welcome to HP Support Forums! I suggest you should follow this HP Guided Solution and see if this helps you solve the problem. Let me know if this works. http://hp.dezide.com/ts/start.jsp?guide=NotebookKeyboardandTouchPadorClickPad.net&section=ignore&as=...Hope this helps! Have a nice day! Justin L.

Read other 1 answers
RELEVANCY SCORE 40.8

This Notebook was bought for me a few years ago and I stopped using it a while ago. I decided to clean it up and upgrade it a bit so I can use it for Work however it wouldn't let me reset to factory settings or do a reset because it lacked recovery files or something. So instead I installed Windows 7 on an SSD and tried to use that. Everything else works fine and I've installed all of the drivers again however the touchpad still doesn't work. It doesn't show up in Device Manager and whenever I go to mouse properties it says it can't connect to Synaptic Driver and that I should uninstall it and reinstall it after a restart. I've installed and uninstalled it numerous times and it still doesn't work. I've done hours of research to see if anybody has the same problem as I do and it doesn't seem quite as severe for anybody else since mine doesn't respond at all. I reconnected all of the wires inside properly so I'm fairly certain it isn't a hardware issue especially since everything else works just fine. TL;DR - Installed Windows 7 on the Notebook because I couldn't factory reset             - Touchpad doesn't work after installing many drivers many times.              - Likely not a hardware issue             - Doesn't show up in Device Manager              - Can't find the same issue online

Read other answers
RELEVANCY SCORE 40.8

my touchpad isn't working. the driver I2C HID device is not working and i believe that is the cause.

i have downloaded multiple driver packages off of acer but non of them worked.

I have an acer aspire E5-573 and am running on windows 10 64 bit
 

A:Touchpad not working

Read other 6 answers
RELEVANCY SCORE 40.8

My touchpad stopped working suddenly. I have tried updating drivers, troubleshooting, and doing the hp assistant scan. Please help! Thank you

Read other answers
RELEVANCY SCORE 40.8

I have a problem with synaptics mouse driver, cause tounchpad is not working. My laptop is: Probook 450 G0, OS: Windows 10.Now, I installed synaptics mouse driver on hp-support website with version: 19.0.19.48 Rev.A(5 May 2016).  The last time, when i uesed to Windows 8, Touchpad work very well. But when i upgrade windows 10, tounchpad have never worked. Although i installed with many version synaptics mourse driver on support.hp.comPlease, can you help me fix it?I hope you can support me soon. Thank you you much!I

Read other answers
RELEVANCY SCORE 40.8

My Asus touchpad won't work. Originally left button became unresponsive then entire touchpad stopped working. Was able to use the touchpad in safe mood, but now the left button seems to be becoming unresponsive again. Troubleshoot says touchpad is up to date and working properly. Help!

A:Touchpad not working

If it's fully functional in Safe Mode then the hardware is good. Try a System Restore to a time prior to when the problem 1st started. There could be an issue with the device driver, although why it would only show up in "normal mode" I can't say. Well, it could be malware hiding as your touchpad's driver, but that's a bit "out there" at this point. Might be worth checking Hardware manager, click "show hidden devices" and report any flagged devices there might be.

Read other 4 answers
RELEVANCY SCORE 40.8

http://dl.dropbox.com/u/1049398/rand...s/DSC00144.JPG
http://dl.dropbox.com/u/1049398/rand...s/DSC00145.JPG

If you CAN see (despite the crappy quality) i have some "special" functions on my laptop, such as being able to FF/pause/start my internet homepage lowering volume pausing etc, these do not work, they light up as they should when 'activated' (pressing top right corner) but then go dark again. anyone know how to fix this? it's a asus x72vn
cheerio

A:Touchpad not working to 100%

Welcome to Seven Forums. I would most likely try re-installing my Touchpad drivers, then take a look at some of the 14 different utility drivers offered.
As I'm not familiar with all the utilities or what their functions are.
I'm sorry I haven't the time right now to research them but their are plenty of very knowledgeable members here that I'm sure we can get it sorted out. Fabe http://support.asus.com/download/dow...Language=en-us

Read other 3 answers
RELEVANCY SCORE 40.8

the touchpad on my aspire 5517 has stopped working and I can use the cursor only with a mouse.I have windows 7.I tried system restore and used devise manager.












Solved!

Go to Solution.

A:Touchpad not working

This reply isn`t going to be much help to resolve the problem but I am posting because this issue is a continual problem...I also had this and also re-installed everything but to no avail...I went online and found many users experience this issue...it is the synaptics device and I have not read of one resolution...in the end I uninstalled the synaptics device and use a wireless mouse which at least doesn`t jump all over the place and works as it should...it is worth a thought maybe.













View solution in original post

Read other 11 answers
RELEVANCY SCORE 40.8

My Alps touchpad quit working awhile back. I use a mouse, but I would still like to get it working again. I tried uninstalling and reinstalling. When I try to install it the Install Wizard comes up for a second and then disappears. What's up with that? Any help appreciated.
 

A:Touchpad not working

It could be bad, how old is the laptop? You could get it fix, they would just replace the touchpad for you. Or just get a wireless mouse that uses USB instead.
 

Read other 2 answers
RELEVANCY SCORE 40.8

Hello,

I have a Dell Vostro 1510 running Windows XP. When I start my computer I get as far as the logon screen, but of course I can't click on a username to get to the desktop because the cursor won't move using the touchpad. I've never had a mouse attached to the computer so I'm guessing that buying a USB mouse and plugging it in won't solve my problem since I can't load the software? How do I get past the logon screen without having the ability to move the cursor? Everything I've read about bypassing the logon screen or using the keyboard to manipulate the cursor assumes I have the ability to get to "Start" -> "Run" or "Start -> "Settings" -> "Control Panel", which I don't.

Any help would be appreciated.

Thanks.

A:Touchpad isn't working

If you buy a basic USB mouse, you won't need any software.

It's worth a try if you want to go that route.

Have you tried booting into safe mode?

Read other 2 answers
RELEVANCY SCORE 40.8

I have a Dell Laptop having windows 7 OS , sometimes its touch pad doesn't work and it shows the bottom of the webpage.
Spam website removed - Moderator ETAF>
 

A:Touchpad not working

I have removed the link to a spam site - please do NOT post links to sites that are not relevant to the thread here

check the F keys at the top of the keyboard and see if theres one to disable/enable the touchpad
 

Read other 1 answers
RELEVANCY SCORE 40.8

the tite says all.I already tried different solutions, but can't see my mouse moving or click again with the touchpad.the mouse works good, but the touchpad is dead.any help?  there is no touchpad driver for windows 10 on lenovo website ?is that right?

A:G40-70 touchpad not working

Hi negozin ,
 
Welcome to the Community Forums. 
 
Have you checked the hidden devices on device manager if any of those would show with any yellow marks / unknown device? The support site do offer Touchpad driver for Win10 that you can try .
 
You can Reset the BIOS defaults by turning off the pc and using the Novo key to access BIOS set up . F9 to load defaults and F10 to save and exit . Allow to restart and check if touchpad would be able to move the mouse.  
 
Update us how it goes.
 
Regards
 

Read other 5 answers
RELEVANCY SCORE 40.8

I have a Lenovo S41. After trying the recommendation of removing the touchpad from devices, the device did not reinstall. I went to the link provided to download Lenovo drivers, and upon installation received a message that the driver I download doesn't work with my device. Yes I downloaded a driver for the S series, and a 64-bit operating system. Please help, it's very inconvenient having no touchpad!
 
 
Moderator comment: New thread created. Subject edited. Was: Re: Z50-70 touchpad is not working - Windows 10

A:S41 touchpad is not working

Good day and welcome to the community.
 
Which specific S41 model do you have? I see three on the support site: S41-75, S41-70 and S41-35.
 
Looking at each support page, I see the touchpad driver package, which is apparently a composite installer supporting three different touchpad models: Synaptics, Elan and Alps.
 
S41-75http://support.lenovo.com/us/en/products/Laptops-and-netbooks/Lenovo-S-Series-laptops/s41-75/downloa...synaptics 19.0.9.5, Elan 11.4.65.2, ALPS 8.201.1611.246
 
S41-70http://support.lenovo.com/us/en/products/Laptops-and-netbooks/Lenovo-S-Series-laptops/s41-70/downloa...SYN_19.0.13.0, ELAN_11.4.68.3, ALPS_8.201.1611.247
 
S41-35http://support.lenovo.com/us/en/products/Laptops-and-netbooks/Lenovo-S-Series-laptops/s41-35/downloa...synaptics 19.0.9.5, Elan 11.4.63.4, ALPS 8.201.1611.242
 
Does this help?
Regards.

Read other 2 answers
RELEVANCY SCORE 40.8

Hi, I've had a Lenovo P50 thinkpad for a few days, and initially the touchpad was working absoluely fine. But today it just randomly stopped functining all together. All the touchpad/tracker buttons/detection just doesn't respond.  I have to naivate my laptop using a mouse at the moment. I've tried re-installing the Synaptics pointing device driver but it didn't change anything - the touchpad is still unresponsive. I also noticed that when I drill into the "Mouse" properties under Control Panel, the touchpad/tracker options are disabled in the GUI, and only the touchpad is ticked (tracker is not ticked) - however, since they're disbaled I can't change anything.  I also checked my BIOS to see if the touchpad got disabled there, but it is actually enabled. Any ideas on what to do? Cheers

A:P50 touchpad not working

strange, just to confirm, is the trackpoint working?could it be a function + Fx key that turns off the trackpoint?I dont have my P50 handy, but just trying to help.

Read other 8 answers
RELEVANCY SCORE 40.8

I have been using my external mouse with my m11x. and when removed my touchpad usually works fine. But recently, my touchpad isn't working.
Whenever my my external mouse is plugged my touchpad is disabled automatically and I did this by enabling the setting on my AlienTouch settings. My problem right now is when I unplug my external mouse my touchpad doesn't respond anymore. I try going to the AlienTouch setting and this is what it gives me:
System.NullReferenceException: Object reference not set to an instance of an object. at AlienLabs.TouchPad.Domain.Classes.TouchPadAPIClass.GetPropertyValue(SynDeviceProperty property) at AlienLabs.TouchPad.Domain.Classes.TappingServiceClass.get_IsTapEnabled() at AlienLabs.TouchPad.App.Presenters.TappingPresenter.refresh() at AlienLabs.TouchPad.App.Views.Classes.ViewFactoryClass.newTappingView() at AlienLabs.TouchPad.App.Views.Classes.ViewFactoryClass.newView(ViewType type) at AlienLabs.TouchPad.App.Views.Classes.ViewRepositoryClass.getByType(ViewType type) at AlienLabs.TouchPad.App.Presenters.TouchPadPresenter.activate(ViewType type) at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised) at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args) at AlienLabs.TouchPad.App.Helpers.EventTriggerClass.fire(ViewType value) at AlienLabs.TouchPad.App.Presenters.NavigationPresenter.changeViewLinkSelected() at AlienLabs.TouchPad.App.View... Read more

A:my touchpad is not working.

I had the same problem. It was suggested I plug my external usb mouse into a different usb port. My external mouse always did work, but the touchpad didn't.  When I plugged the external mouse into a different USB the touchpad started to work. This may help you?

Read other 1 answers
RELEVANCY SCORE 40.8

I have a Packard bell notebook that has touchpad problem.

at first the was windows 8 were the touchpad was working well but when i installed window 10 by formatting the pc its not working. I tried to download drivers from different website and try to install different windows again but only for windows 7 which is working. i don't know now what to do as all just failing. The model number is MS2397, ENTG71BM-C8J0.

Read other answers
RELEVANCY SCORE 40.8

Hi,I've just recently bought an Open Box HP Pavillion 15 - AY009DX(X7T50UA). I immediately updated it using the Windows Update setting. After the update, everything seemed to work well except for the touchpad. I tried checking the Mouse Properties but there is nothing listed under Hardware and there was no other tabs except for the 4 which are Buttons, Pointers, Pointer Options, and Hardware. Everything I've read regarding this problem said to click Device Settings which I don't have.I also tried to check the Device Manager but it didn't show "Mice and other pointing devices" until I showed hidden devices. That must mean that there's something wrong with it. When I clicked the drop down arrow of "Mice and other pointing devices" there was one named "Microsoft PS/2 Mouse" and it also has an error sign (yellow triangle with a black exclamation mark inside). It says "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)."I tried to Update Driver Software and it changed into Synaptics SMBus Touchpad but it's still not working. I also rebooted the laptop after that but it's still not working. I uninstalled the Synaptics driver and installed the driver manually from the HP website and it's still not working even after rebooting it. I've also done the one where you remove the battery to clear it from electric charges or something and then holding down the power button for a minute and it still didn't work. I've tried to load setup... Read more

Read other answers
RELEVANCY SCORE 40.8

Im using HP Pavilion DV-6 1161 TX...I installed Windows 7 ultimate OEM the other day..The touchpad doesnt seem to work at all...Installed the synaptics drivers time and again...but nothing seems to work...Most of the times, the touchpad power light is always on and refuses to turn off...Im using an external mouse for the time being...If any1 could find a solution to this problem....it would be really helpful..Also the synaptics doesnt show up in the device manager...

A:Touchpad Not Working

Go to device manager (type it in on start menu search) and go to 'Mice and other pointing devices'. Double click on the 'PS2 Port Touchpad' (or something like that) and look at driver status. If there is anything interesting, please tell us.

I am note sure why installing the latest drivers doesn't help .

Read other 8 answers
RELEVANCY SCORE 40.8

The touchpad on my Dell Inspiron 7537 is not working. The cursor disappears, and the touchpad is not recognized. Sometimes when I start the computer the touchpad works fine until I type something with the keyboard - then it disappears again. When I look in Device Manager I can only see the “Dell Touchpad” if I click on Hidden Devices. I have uninstalled and reinstalled it, updated the driver, uninstalled and reinstalled the driver, and reinstalled Windows 10. After I reinstall Windows 10 the touchpad works for a short time, and then disappears again. I also replaced the touchpad itself. I have run out of ideas to try. Any suggestions?
Thanks - Kett

Read other answers