Over 1 million tech questions and answers.

Black screen and flashinh dash

Q: Black screen and flashinh dash

Hi there.

I have just turned my Acer Aspire 5735 on and as soon as the logo comes up the screen turn black with a flashing dash in the top left hand corner. I can not get into safe mode, and can not press any F# except for F2 and F12. I have tried everything I have found on google but nothing works.

Please help

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Black screen and flashinh dash

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 74.4

hp ze4805wm notebook just shows a flashing dash on a black screen, then this message: Windows could not sta rt because the following file is missing or corrupt: <Windows root>\system32\hal.dll. What can I do to resolve this issue?

A:black screen with flashing dash

Hi jsharper,

Check this link out: Black Screen Issues and Troubleshooting

Hope everything works out well for you.

Read other 2 answers
RELEVANCY SCORE 74.4

Hi there.

I have just turned my Acer Aspire 5735 on and as soon as the logo comes up the screen turn black with a flashing dash in the top left hand corner. I can not get into safe mode, and can not press any F# except for F2 and F12. I have tried everything I have found on google but nothing works.

Please help
 

Read other answers
RELEVANCY SCORE 73.2

Hi! Sorry for opening a new thread but this is just so serious and I am so stressed out about it that I didn't have the patience to search if the thread is already open.
I have a black screen and white blinking dash problem. The thing is, I can't even type f2 or f4, or anything whatsoever. It is not reacting at all to the keyboard. It's the second time this is happening in 2 days, every time I turn it off (properly) and try to turn it on, it does that. After a lot of hopeless trying to turn it on or make f2 or f4 work, it just starts working again normally... And now I finally turned it on after I spent the whole morning trying and I'm working on saving all my files, but now I'm scared to turn it off. What do I do?? What is wrong with my computer?

A:Black screen with a blinking white dash

Hi and welcome to TSF when you have reached your desktop please try running these SFC /SCANNOW Command - System File Checker - Windows 7 Help Forums
How to use CHKDSK (Check Disk) | Windows 7 Forums
And yes, do please save your data first.

Read other 1 answers
RELEVANCY SCORE 73.2

hey guys


well yesterday i turned off my pc came back to it turned it on it started up for 3 seconds then the screen went black with one white flashing dash at the top left

if i restart it it happens again. I changed my monitor and it still didint work so i know its my hard drive or something


any help would be greatly appreciated





Thanks




Starline
 

A:Screen goes black with one white flashing dash

anyone have any ideas?
 

Read other 5 answers
RELEVANCY SCORE 73.2

I have an HP Pavillion dv6000, running with Windows Vista Home Premium.

When I turn on the computer, the HP intro screen turns on but then immediately goes Black with a white flashing dash in the top left screen. I can not access F8, safe mode, etc. I can only access the basic set up menu.

I never received a restore, or a Windows XP disc. Ive come to terms with the fact that I will most likely would lose my files and am willing to do a restore, but I can not get onto the log on screen. Do i need to see a tech? Please be advised I am not tech savvy and just want to get back on to my computer

Any help/links/disc downloads would be appreciated.

Thanks in advance!
 

A:Black Screen. White Flashing Dash

Read other 9 answers
RELEVANCY SCORE 72.8

My computer, which was running windows 10 without much issue, is now completely unusable for reasons beyond my comprehension. After bios messages I now only have a blinking white dash on a black screen.

I have tried various repairs, with the windows recovery usb. All automatic repairs fail due to the disk "being locked", so i have tried a few guides which involved bcdboot commands which have failed to fix anything. One command was bcdboot g: which gave an error like failed copying boot files (i forget the exact wording) .

Could some kind soul point me towards a fix, im tearing my hair out! Many thanks!
 

A:Cant boot at all. Blinking white dash on black screen?

The best fix, for the moment, is a reinstall. It is free and still in the testing stage.
 

Read other 2 answers
RELEVANCY SCORE 72.8

I have a Sony Vaio laptop with an upgrade to windows 7 from vista. Yesterday my computer was really slow so I reset it to try and speed it up. I got passed the Vaio screen but then came the black screen with the blinking dash on the top right corner. The only thing I can enter is BIOS with F2 nothing else works. I can't enter safe mode or anything else. I've tried a few things, but nothing works.

1. Reseting default values in BIOS
2. Removing everything but internal Hard Drive in boot menu.

I have a windows & start up disc

3. Ran Startup Repair: Says couldn't detect a problem if recently attached device then remove it. ( Nothings Connected)
4. System restore ( was successfull but still no go)
5. Ran chkdsk & chkdsk/r from command prompt option

I also contacted Sony Support and with the 15 minutes alotted

6. Reseated memory

I just want to be able to get into the computer one more time so I can transfer my music and some other important files to my External Hard Drive. Please HELP!!! Any help is GREATLY appreciated.
 

A:Solved: Black screen & Blinking dash on Startup

Read other 10 answers
RELEVANCY SCORE 72.8

I just recently rid my laptop of viruses with the help of boopme. However, I'm having some issues when starting it up. 3 things will either happen:
1)Stay stuck at the "Compaq" screen
2)Go passed the "Compaq" screen but then to a black screen with a blinking dash at the top left corner (If I wait long enough, like 3 long minutes, Windows 7 will eventually start up.)
3)Or go passed the "Compaq" screen, to the black screen with dash, but eventually instead of starting up, it will say something like "Operating system not found"

A:When I restart, it still goes to the black screen with the dash for like 3 full minutes

System manufacturer and model?

Louis

Read other 5 answers
RELEVANCY SCORE 72.8

My laptop is Lenovo B50-30 20382I tried to enter the bios (fn+f2) but this time didn t work, i tried the next time and the same resultI can use the windows with no problemI don t know what to do, i really need to use the bios, i tried advanced start to enter in uefi settings but nothing. I searched through many forums but i reallt find one solution. To reset the bios by removing the CMOS battery from the motherboard. Is there any solution that i can do without removing the cmos battery?Please help me

Read other answers
RELEVANCY SCORE 72

Last night , I was watching movies on my Laptop, since google chrome wasn't working I used Internet Explorer. I opened task manager and I closed explorer.exe by accident so I shut down the computer. when i restarted it , my laptop was stuck on the white dash on a black screen , i tried reinstalling windows by can't get past the dash after the installation is done. I cant even access Safe mode. Please Help!

A:Toshiba Laptop L650 with White Dash on a Black Screen

Hi and Welcome to TSF!

Please preform a hard drive test using this guide here:

How to perform a Seagate's Seatools Test | Tech Support Forum

Read other 19 answers
RELEVANCY SCORE 72

Hello, I am trying to install Windows XP (because Windows 7 is damn slow) Corporate Edition 64-bit but after the Copying Windows Files setup portion, the setup wants to restart my computer, but after the motherboard logo, I just get the blacnk screen with white dash - if CD is inserted I get "Press any key to boot from CD....." and a white dash at the end with nothing happening. I've searched for a solution everywhere, but I didn't find my case. I have installed XP atleas 20 times on this computer, and I've never had such problem before. I thought it could be because of the 64-bit version, but after trying to install the 32-bit version I have got the same issue, which has never happened before. Windows 7 installs perfectly. I have: removed the CD from the drive; Updated the BIOS to the last version; Tried running in safe mode and nothing helped. My computer specs are: Processor: Intel Pentium DualCore @ 2.80 GHz, 4GB of DDR2 RAM, 650GB HDD SATA2, ATI HD 4770 512MB DDR5 Graphics Card, American Megatrends Inc. 0502 BIOS. I hope there's somebody out there to help me because I really want XP.
-Mucky
 

A:Black screen with white dash after first portion of Windows Setup?

Seems that Windows XP installation is not detecting or having problems with your SATA2 drive.

Try going to BIOS and Switching the SATA2 drive out of RAID mode if possible see if that helps.

Windows Xp has issues with SATA2 Drives.

Or you may need to slipstream your copy of Xp with sp2 or 3 if your cd is only SP1 for it to recognize and work with SATA drives. Also with SATA drives I believe Windows XP only recognizes 128GB 137GB SATA drives.
 

Read other 3 answers
RELEVANCY SCORE 72

I have this problem that when i boot my computer the acer logo appears and then it goes to a screen that have some text on it and then it continues to a black screen with a blinking dash pn the upper left corner. I dont actually know what the problem is and I am hoping that someone could help me.
 

Read other answers
RELEVANCY SCORE 71.2

hello, Hoping you can help

I have a Asus running Windows 7.. recently its been lagging quite a lot..
a week ago I started having issues even just getting to websites like Youtube, and it would freeze up..
I ran a disk cleaner, defragment (which said only 3 % fragmented). I also ran 2 virus scans. both Microsoft Essentials, as well as Malwarebyes cleaner..

last night again I was lagging horribly.. when I checked My Computer. it showed my C Drive was in the Red, and veryyyy near full. Yet my Partitioned D drive showed near empty..

This morning I rebooted the laptop.. as soon as it powered up to show *Asus*. from that screen it goes to a black screen, with a dash. that's all I get..

Ive tried to remove the battery and unplug.. nothing seems to help.. im at a loss. Im hoping to get into the lappy to I can transfer and delete filoes from C drive..

Any help would be greatly appreciated..

?? Is My laptop dead in the water?? or can I fix this..

Tx for your help in advance
 

A:C Drive Full - Laptop only comes on to brand name then sits on black screen with dash

Read other 10 answers
RELEVANCY SCORE 71.2

First, i restarted my stupid computer
Then, i got that grub error.
I happily fixed that.
However, when I restarted it again,
I got stuck at black screen with stupid blinkking white dash.
So I use the Recovery Disc thingy
And i clicked that first option.
Then it says, something like
unable to fix it.
Then it says that the stupid missing boot thingy is missing.
Googled for solution.
Tried those command prompt like
Fixmbr or scanos
(it says theres an installation
I typed Y for yes and still,
That boot missing chkdsk thingy still pops up)
Remove hardwares (wait whats a hardware is it those usb thingy?)
Checked the BIOS which I googled again for its meaning.(and yes, it is in order)
But never worked.
So any suggestions or explain with more detail?
Because I have no idea about these computer stuffs.
Help me !

A:Boot missing, stuck at black screen with blinking white dash, and more

GRUB can often corrupt Win7 beyond repair when on the same HD. You may end up having to wipe the HD to reinstall.

Work through these steps for Troubleshooting Windows 7 Failure to Boot - Windows 7 Forums

Read other 4 answers
RELEVANCY SCORE 54

Dear mods, I have noted a faint white dash (about 3 inches) in the middle of my P51 Screen which appeared a couple of days back. It looks somewhat like a stuck/dead pixel case. As possible solutions, I have tried the following : i. Battery Drain for 30 mins, and re-checkii. Disable/Enable the Graphic Card Provided that there are no easy solutions, I wish to know whether the replacement of screen of my product (which is still under warranty) will be covered or not? Regards,B.  

Read other answers
RELEVANCY SCORE 54

I have an Acer Travelmate 2300 running windows XP. Whenever I try and start it up a blank screen appears and a flashing white dash is there in the top left hand corner. Is there any way i can fix this?

Any help would be greatly appreciated. Thanks

A:Blank Screen with Flashing Dash On Startup

Thats apart of the operating system, is not an error so there is nothing to fix.

UNLESS thats all you ever see, but I got the impression from the post your computer still starts just fine.

If your machine is not booting and stuck at the "flashing dash" you may need to do a system repair.

Read other 2 answers
RELEVANCY SCORE 53.2

hi people i have a adven laptop but she i boot it up just goes onto a screen with a flashing dash line in corner of screen

A:flashing white dash line in corner of screen

Go into your BIOS and verify that the hard drive is listed as the first boot device. If it is, it sounds like your mbr is corrupt, or your hard drive is damagedI'm still learning Vista, not quite sure if fixmbr is the same or not. Give yhis a look:http://www.vistaheads.com/forums/microsoft...-mbr-vista.htmlhttp://support.microsoft.com/kb/927392

Read other 5 answers
RELEVANCY SCORE 52.8

I have a dell pc with windows 7. The computer loads the dell logo, the screen is black with the blinking line in the corner. I have tried all solutions that I have come across, the fixboot, replacing config files and last resort, I did a fresh install of windows. After the fresh install of windows, it worked for a few days and now it is doing it again. What is my next option?
 

A:Blinking dash in corner of screen computer wont boot.

Read other 13 answers
RELEVANCY SCORE 52.8

I have a dell pc with windows 7. The computer loads the dell logo, the screen is black with the blinking line in the corner. I have tried all solutions that I have come across, the fixboot, replacing config files and last resort, I did a fresh install of windows. After the fresh install of windows, it worked for a few days and now it is doing it again. What is my next option?

A:Blinking dash in corner of screen computer wont boot.

Hello Nicole and welcome to Seven Forums.

Since you've already done a reinstall of Windows 7 and the problem has returned, I think I'd start looking at hardware issues. Perhaps a hard drive, RAM, motherboard, etc that's failing. One of the Forum experts has prepared a couple of troubleshooting guides that might help isolate the problem. I might start with the Memtest86 and HD Diagnostics test outlined in Steps 8 and 9, first tutorial.

Troubleshooting Steps for Windows 7

Troubleshooting Windows 7 Failure to Boot

Read other 9 answers
RELEVANCY SCORE 52.8

I have been having problems with my Dell Dimension 5000 since this morning, basically I switch it on and all I get is a blank blank screen with a white dash blinking in the top left corner.

I can't access safe mode or bios settings using the function keys and I can't get further then this blank black creen with flashing dash.

I have taken out my gfx card and cleaned the dust out of the fan, checked all the cable connections inside and out. I also checked other posts for solutions but could not find any that related to mine as I can't access anything. I have also checked the Dell Diagnostic lights which indicate:


Other failure has occurred.
Ensure that the cables are properly connected to the system board from the hard drive, CD drive, and DVD drive.
Check the computer message that appears on your monitor screen.
If the problem persists, contact Dell.

Dell don't seem helpful as the computer is out of warrenty and I even get passed around or hung up on. Only thing I can think of is that my hard drive might of gone as it makes a reading noise about five times then I hear nothing even though I replaced the HD about two months ago.

Sorry for the essay, hope I can sort it out!!

A:[SOLVED] Windows XP boots up with blank screen with flashing dash

Good morning Mikey, well buddy your at the right place, just the wrong section. We have some great techs in our hardware section that will be able to help you straighten this out. You have not done anything wrong, I just want you to get the proper help that you need. Here's what you do:

Mark this thread solved using the quick tools option located at the top of this thread and selecting solved from the drop down menu. So you are in compliance with forum rules that state that you cannnot have more than one thread open at a time.

Post your problem at the link below.

http://www.techsupportforum.com/f16/

This will get you the help you need to resolve this issue. Take care and good luck.

I will monitor you to make sure your getting the help you need.

Thank you
Patmark

Read other 3 answers
RELEVANCY SCORE 52

I have an Hp pavilion a1226n desktop computer and shut off the power this morning during a bad storm. I used the regular procedures and shut it down correctly, but when i tried to boot it up earlier this morning, the only thing that comes up is a blank black screen with a flashing white dash in the upper left hand corner. I have already tried to remove reset the BIOS by removing the battery and then later restarting, but it did not help at all. Also, it wont even boot far enough for me to start in safe/real mode. Any suggestions?
Thanks for the help

A:[SOLVED] Boot problem- blank screen flashing white dash

Hi sherm12789 and welcome to TSF

Start up your computer by either tapping the F1, F2, F4, F6, F8, F10, F11, F12, or Delete keys to access the systems BIOS. For the exact information on what key to start up the System BIOS refer back to Original Manufacturer System Documentation.

After getting into the BIOS, look for a page that would have something like, eg. PC Health Screen or System Monitoring Page. When you have found a page similar to this post back what the BIOS says for your temperatures, voltages, and fan speeds.

Read other 3 answers
RELEVANCY SCORE 47.2

 Hi all,First post!  My Dad's Lenovo laptop goes to a black screen when starting up, so is unusable.I haven't seen it in the flesh yet but have started to research things for him and have found that 'black screen' shows up quite a lot for Windows 10 and Lenovo PCs! We were so impressed with my Dad's PC I've ended up with the same model myself:Lenovo YOGA 500 Convertible Laptop, Intel Core i7, 8GB RAM, 256GB SSD, 15.6" Touch Screen.Also labelled as: Yoga 500-15IBD Laptop (ideapad)  I see some people mentioning hardware failures and others device driver problems with the graphic card etc. but haven't read a definite cause/fix for this so far. I've just found this recent critical BIOS update for this PC which mentions the black screen problem:Software name: BDCN63WW Version 63[Important updates] Fix Win 10 lid close black screen issue.http://support.lenovo.com/gb/en/products/Laptops-and-netbooks/Yoga-Series/yoga-500-15ibd/downloads/D...I haven't seen this mentioned in the forums? Has anyone else used this?If the PC always boots to a black screen I'll obviously have trouble installing this! I'm hoping that it will boot in Safe Mode or I'm going to have some trouble installing it?! I don't know whether to install the BIOS update on my own machine which is running fine - I think I'll wait until I see my Dad's laptop first which will be in a few weeks. Has anyone had any experience of this BIOS update or other comments on this?Thanks. &nb... Read more

A:Yoga 500 'BLACK SCREEN' - BIOS update: "[Important updates] Fix Win 10 lid close black screen issue"

I'm still wondering about this... I've just updated the Lenovo Companion after seeing it mentioned in another thread. It looks like this s/w is supposed to scan the PC and recommend Lenovo updates - critical and nice to have ones. Initially the Companion was showing a critical update for Lenovo SHAREit and a recommended one for my BIOS. It says I'm currently on BDCN28WW and offered something like v61 and not the 63 I mentioned in my first post? After letting it update SHAREit and re-scanning the BIOS update is no longer being offered and still shows me on v28 ??? I'm not sure I trust this 'Companion' app!My laptop seems to be running fine so I don't want to break it updating the BIOS if it's not required. For all I know my Dad's broken one may be broken because it upgraded?! Does anyone else use/trust the Companion app?And has anyone else seen it change it's mind on recommended BIOS updates?Thanks.

Read other 4 answers
RELEVANCY SCORE 46.8

I have Windows 7 Ultimate 32 bit. So, these are my problems described in the title. I cannot change desktop from black, only can set a picture as a background.

When I am in pictures folder for example, I see blank or black thumbnails.
When I right click and go to personalize, I can see black themes instead of actual pictures.

I tried almost everything.
- reinstalling video driver
- clearing thumbnail from disk cleanup
- resetting dwm.exe
- going into safemode and then restaring into normal windows
- I tried fixing shell by using "fixshell"
- clearing & repairing registry errors
- ran an error checker
- ran a file checker

I have Microsoft Office 2010 - I heard that it could be the issue, but maybe I am not right, anyway...

I attached a print screen photo.

And, I am hopeless, any help please? Thanks

A:Windows 7 black screen, black or blank thumbnails, and black desktop themes

I noticed you're not running Aero. Click on last item, left side - "Troubleshoot problems with transparency...."

Office 2010 should not be a factor here. Public pics folder is empty - it should have sample pics in it.

Validate your OS installation - Genuine Microsoft Software

Read other 4 answers
RELEVANCY SCORE 46.4

I'm getting the black screen with movable cursor or KSOD (Black Screen Of Death) on Windows Vista.

What happens:
The system powers on.
POST
BIOS
Start windows normally
Windows splash screen
-> Black screen <-

What I can do:
I CAN enter BIOS and have reset the default settings.
I CAN press F8 to give me advanced boot options, but all options have the same result, apart from "Repair your computer".
I CAN load the "Repair your computer" option.
I CAN move the mouse around the screen.
I CAN press shift 5 times to get a dialogue to appear, but no control panel.
I CAN press the power button to shut down the system.
I CAN start up in safe mode, which is exactly the same, but with lower resolution.

I CANNOT seem to do anything else.

However, there are workarounds to accessing the hard drive:

I CAN use MSDaRT or the System Recovery Tool.
I CAN use the hard drive as an external USB hard drive on another machine.

What I've tried:
Startup Repair - Could not detect a problem.
System Restore - No restore points.
Windows Complete PC Restore - A valid restore location could not be found.
Windows Memory Diagnostics - No errors.
SFC Scan - No problems.
Stand alone system sweeper - No problems.
Hotfix Uninstall - Nothing to uninstall.

I also COULD do a partial or full "Packard Bell Recovery", which is essentially like reinstalling windows. I DO NOT want to do this.

I'm sure this is just a simple software issue real... Read more

A:Black screen with movable cursor or KSOD (Black Screen Of Death) Vista

I think I saw this post aver at Toms but I also think you gave some additional info.
I think what may be going on it during the switch from the windows low res video driver to the driver used in normal mode.

Since you can get into safe mode try to go to device manager.
Start|right click computer|properties|device manager.
Look in the display adapter.
Is there a yellow exclamation mark there?
Or is it showing the video that you know should be there?
Please post the video that the machine uses and or the PB model.

Read other 15 answers
RELEVANCY SCORE 45.6

i need to know what to do to get it off the black screen has to do with geuinnse i ant spell is said windows 7 its not a part of genunse 

Read other answers
RELEVANCY SCORE 44.4

Hi, I have this 4 year old Lenovo Y560(config below)

The discrete graphic card has probably fried a long time ago, so last year when I did a clean install of Windows, I had to disable ATI Card permanently in the device manager using safe mode and used the Intel integrated card. A few days ago, I booted up windows only to encounter, "A disk read error has occurred, press ctrl+alt+del to restart" . I tried to boot up using WIN 7 install disc, but soon after the Starting Windows logo , the screen turns black and I am left with a cursor in a black screen. I tried to boot into Safe Mode but still I encountered a black screen with just the cursor .

I booted with Ubuntu live usb and was able to access all my partition and did back up and even formatted the Windows Partition. I tried to boot using a WinPe and faced the Black screen with a cursor again. I even reset BIOS to default, changed Graphics Adapter from "Discrete' to "Switchable' and vice-versa, but no effect at all. When I boot up using Ubuntu and ran lspci | grep VGA I can see both cards listed. I even tried to boot up using Windows 10 preview disk, still I get a black screen after the Windows loading screen.


I can't afford to buy any laptop presently since I am currently at college, so using Ubuntu for now. Is ther any way to install Windows 7 again? Is it possible to get the ATI Card working properly- reballing, reflow?
Any way to permanently disable the ATI card and get w... Read more

A:Black Screen During WIN 7 POST , Black Screen Even In Safe Mode

What other graphics adapter choices are available in BIOS setup? If you choose Switchable is there software on the Lenovo site for your model that's needed? Are you using the Display adapter software from there?

Have you tested your HD with the maker's HD Diagnostic extended CD scan, followed by a full Disk Check on a single disk partition you create?

Then work through the steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums including trying an alternate install method (disk><flash stick) with new media. These steps overcome almost all install failures, so you'll be reasonably sure the problem is hardware or BIOS settings if nothing works. But don't skip any steps.

Try Clean Install Windows 10 Technical Preview to see if there's any difference with a more modern OS install. It's already a very polished OS and worth testing this.

Read other 1 answers
RELEVANCY SCORE 42.8

Hi there,

Am using a Dell Inspiron 6400 with XP. It'd been running ridiculously slowly recently so I started an AVG scan and AVG immediately threw up a file, which I then deleted, then I got a "fatal error" message flash up. Since then I havent been able to get to the log in screen, it merely goes to the black screen with cursor, and Safe Mode is just a black screen with Safe Mode in each corner. Ctrl Alt Del also doesnt work in Safe Mode for some reason, and I have no CD. Ho ho.

Anything I can do to fix this?

Thanks
 

A:Black screen & no log in/black screen in Safe Mode too

Read other 6 answers
RELEVANCY SCORE 42.8

I have been struggling with an intermittent problem for many months, and it is getting worse. I am running windows vista on a toshiba satellite laptop.

My screen will go dark (not quite as black as when the computer is off) when I am using it, and although the computer is still working, I cannot see the screen. Then, on startup, I can occasionally see flashes of the startup logo, which is enough to let me know it is loading. My cursor quits working as well.

After I run spybot in safe mode, and run it again at startup, it works for some time. (This last time was 2 days). So I believe I have a nasty virus. I run Norton 360 all the time, spybot rather frequently, and malaware bytes about once a month.

I am able to get it in safe mode by hitting the down arrow once, and hitting enter.

It is very frustrating. I don't think it is the video card, as it is repaired after spybot use.

Any suggestions?
 

A:Startup screen flickers to black, then all black screen

That is weird situation I'd say. I am unsure what actually is the issue here, perhaps one way of finding what may be happening is having a look at your Event Viewer Logs. You can find Event Viewer, in Control Panel, Administrative Tools.

Also please follow these 8-steps, and post your logs at Malware and Virus Removal Forum for analysis. Regards
 

Read other 1 answers
RELEVANCY SCORE 42

Hello,

So on my computer, something strange happens when I uninstall UxStyle. It has broken my Windows install once and it has done it again. The first time, I kept on doing system restores to see what was the problem that made that black screen. After trial and error, I narrowed it down to UxStyle. So, I deleted Windows 8 and installed Windows 7, which is what I wanted in the first place. Now, I decided to triple-boot Windows 7 with Vista and 8.1, and it has succeeded. I reinstalled UxStyle thinking it was just a problem with my old Windows install, and then uninstalled it after a few days since I felt like the regular look was better. I rebooted Windows and the same effect happened.

So, I would like to know if I can get and replace those three patched DLLs with unpatched DLLs for Windows 8.1. Could I just change the broken ones to have .old next to them and then place the ones I get here there? Also, would sfc /scannow work?

A:UxStyle Black Flashing Post-Windows Update Black Screen

Hello lct01a, and welcome to Eight Forums.

A sfc /scannow will attempt to repair any modified or corrupted system files, so that would be a good first step.

SFC /SCANNOW Command - Run in Windows 8

Read other 6 answers
RELEVANCY SCORE 42

Bit of a long story but here I go.

I have 2 Radeon 6950 with the crossfire thing set up, it's been working well for over 2 years.

Over the last few weeks I've been having issues, mostly while watching videos (usually HD and/or full screen). The video will freeze, the audio will loop, then eventually the screen goes black and I get an error message saying "Display driver has stopped working and has recovered".
Sometimes it didn't recover and I have to turn the computer off.

What's now happening is it will freeze at the windows start up. Then after resetting I will get to windows in very very low resolution and in black and white.

So I 're-seated' the cards. I couldn't notice any obvious damage to it except the fans were very dusty so I cleaned them.
Boot it up and I still get the black and white.
I checked the device manager and it said one of the cards was having problems, I uninstalled both drivers from that menu (not quite sure if I should have done this) and for whatever reason it's now working.

However it now seems one of my cards is not being recognised. Only one display adapter is shown in the device manager and AMD catalyst only recognises one card too.

What's the best course of action to determine what's wrong with what card (still not quite sure which one it is).

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: Intel(R) Core(TM) i5-2500K ... Read more

Read other answers
RELEVANCY SCORE 42

Hello there,

So as the title says, I'm having some problems with my computer. I bought it about 4 weeks ago, and no issues with it other than when I try to play an MMO that would make the graphics card work. The graphics card that is installed in the computer was separately bought and installed, so I'm thinking it might be conflict issues with the card, but I don't know.

The way it happens is, I run the games, I can play for anything from a minute, to 15mins and then my screen says it has disconnected from the image, goes black, and I can hear my computer restart, but my screen stays black. I have to manually power off and back on for my screen to start showing images again. Once restarted i get the "Problem Event Name: Bluescreen" thing.

It's really annoying since I just bought GW2 and I can't play properly any help would be appreciated.

Also, in the Action Center it's said that my Nvidia Graphics Card has stopped working or crashed, multiple times, naming the exact times my computer crashed.. which is why I believe it has to do with my card.

A:BlueScreen playing MMO's. Screen Goes Black, Restarts and Stays Black

Code:
BugCheck 116, {fffffa800cf0e010, fffff88010aee630, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+ade630 )

Code:
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Oct 02 19:21:13 2012 (506B3099)
Follow these steps:STOP 0x116: VIDEO_TDR_ERROR troubleshooting
Overclocking -
I recommend if you are overclocking any hardware, that you reset these values within the BIOS to their default values in order to increase the stability of your system.

Please run the following tests for your graphics card and RAM:
RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferrly overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Graphics Card:Video Card - Stress Test with Furmark
Read all the steps within the hardware test tutorials very carefully,... Read more

Read other 9 answers
RELEVANCY SCORE 42

i believe virus deleted a system 32 exe file it is a confident guess. I have a true black screen nothing at all comes up doesn't load anything no hot keys work. windows 7 hp laptop I need to know if I can get into bios if f keys don't work, cd repair disk don't work. what can I do power button and wifi button lights up on keyboard and fans are running but black screen no response. it is not a graphic card problem not a hardware problem at all. please help

A:Black Screen of Death true black no keys work at all!!!HELP

Do you see the bios splash screen?
Did you ever enter BIOS before, so you know how to do it?
Do you see the win7 animated welcome screen (prior to logon)?
------
cd repair disc .... you mean this? System Repair Disc - Create

Read other 4 answers
RELEVANCY SCORE 41.6

I just bought this laptop for about 1 month, the laptop work fine before. But after...I don't know maybe after the windows update, the driver make the screen flickering and some dots appear on the screen, sometimes the screen lagging and went black. I'm pretty sure it's because of the driver because if I disable it, everything is fine,but that is just a temporary fix, every games is unplayable when I disable the driver. I tried to reinstall it using driver from Intel, Windows, Lenovo but none of them work(newest)

Read other answers
RELEVANCY SCORE 41.6

A black dot 1" in diameter and some black smears have appeared on the bottom right corner of my screen. I believe whatever page I have up is ok behind it. And I think it is getting bigger. Monitor is a Dell 19 " Analog Flat Panel. Maybe it is finished.
 

A:black dotr amd black smear on monitor screen

Read other 8 answers
RELEVANCY SCORE 41.6

When i press the power button evrythings... looks ok

all fans starts

the led on my keyboard flashes...

but the flashing led on my screen that indicate that it's sleeping does'nt stop flashing.... which mean it does'nt receive any information...

When i press restart it often solve the problem and my screen computer starts perfectly

I JUST INSTALLED A BRAND NEW POWER SUPPLY (hight quality)

.... the problem still there..

If someone know how to get a log file that would help me to determin the problem...

1- Does reseting de cmos could solve sumtin..
2- To reset cmos i need to remove the bateri for about 30 second ?
3- does a poor batery could make such problems...
4- I need hlp

Or if someone have already experienced that problem and could tell me what you did to solve the problem... i just baught a power supply antec 480 but i didnt solve anything.... my 3d card is brand new... and my cable looks fine... but who knows...
pls HLP ME

(information about this error must be written in some log files?)

Thanks for replies
 

A:PITCH BLACK!!!(black screen when you press power you know what i mean?)

Read other 16 answers
RELEVANCY SCORE 41.2

How do I get rid of Dash? My dtr d/l it and I don't want it! It doesn't have an uninstall feature and it doesn't come-up in my add/remove programs files.
 

A:Uninstall Dash

Delete all the files in Windows Explorer associated with that program. The files will be in whatever folder you installed that program into. Hopefully you created a seperate folder to put that program into. That would make it easy to locate them.

What is Dash anyway? What's it do? Do you have a website link for it? Maybe one of us could download it and give you a list of the files to delete. Or perhaps you could email the program writers and have them tell you what files to remove.
 

Read other 1 answers
RELEVANCY SCORE 41.2

How does one automatically make a long (alt-0151) dash appear in fields that are a value of zero ion excel 2000?
 

A:Dash for Zero in Excel?

pick the entire spreadsheet with the little square on the upper left of the sheet. Right click - format cells - and go to custom and find this _(* #,##0_);_(* (#,##0);_(* "-"_);_(@_)

When you do this anytime you enter a zero in any cell you'll have the - you want.
 

Read other 3 answers
RELEVANCY SCORE 41.2

HI Guys
I have just bought a VICO MARCUS 5 dash cam which is not being recognized in my desktop but working OK in the laptop.

The same disk was used on both computers which is Win 7 home premium service pack 1, first of all both computers did not recognize the dash cam but after trolling the internet a suggestion was plug in dash cam first before turning computer on and it worked fine on the laptop but still not working on the desktop.

I have gone into device manager and all usb drivers are installed ok I have also gone in and done add a device but still the same problem it does not add the dash cam.

Any help would be appreciated because it is beginning to annoy now.

Cheers
Norman

A:DASH CAM NOT RECOGNIZED IN WIN 7

Hi are you plugging it in the front or rear ports, I would suggest the rear as they have better power.

Read other 19 answers
RELEVANCY SCORE 41.2

New to vista -upgraded from windows xp now I cant play any of the Dash games-no matter what I download it wont let me play lastest error message could not find any DIRECT 3D Devices--I have gone to dowload sites but nothing seem to work

thanks
lisa

A:dash games

Hi,

Are your specs right?

You are showing that you only 503MB of RAM or is that your hard drive space.

What is the exact model of your PC & do you have a internal or a additional graphics card? Also do you have the correct drivers?

Nvidia = Nvidia Autodetect

ATi = AMD Driver Autodetect

Read other 1 answers
RELEVANCY SCORE 41.2

Weird stuff is happening. Recently our expired domain was picked up by another company. As soon as that happened, no one could access exchange through VPN. You can ping the server by its IP, but no longer by it's name. After talking to Dell, they told me to go into the cleints PC and take out the mydomain.com from the suffix. That worked until the PC went into standby, then it could no longer access exchange. Had to reboot in order to get it back. Well, Dell said they can no longer help me, have to call Microsoft. But it still seems like this is a DNS issue with our old domain. When we ping our server by name, it resolves to the new owners of our old domain. So it seems like a pointer needs to be in place some how. Any thoughts on this. Thanks.

Running 1 domain server with exchange on it, and two storage servers.
Exchange 2000 and Server 2000.
 

A:VPN and exchange with a dash of DNS

jgsketch said:

Weird stuff is happening. Recently our expired domain was picked up by another company. As soon as that happened, no one could access exchange through VPN. You can ping the server by its IP, but no longer by it's name. After talking to Dell, they told me to go into the cleints PC and take out the mydomain.com from the suffix. That worked until the PC went into standby, then it could no longer access exchange. Had to reboot in order to get it back. Well, Dell said they can no longer help me, have to call Microsoft. But it still seems like this is a DNS issue with our old domain. When we ping our server by name, it resolves to the new owners of our old domain. So it seems like a pointer needs to be in place some how. Any thoughts on this. Thanks.

Running 1 domain server with exchange on it, and two storage servers.
Exchange 2000 and Server 2000.Click to expand...

If your no longer have a public domain you can access everything by the IP addresses of the destination servers.

If the VPN clients were connecting to a DNS name, e.g. vpn.yourcompany.com, they will be able to connect to the old IP associated with that entry. The same goes for the Exchange server, if it was mail.yourcompany.com they will be able to connect to it with the current IP address.

It depends on what you have in place for the VPN if the netbios names will connect you to your internal server. Since you lost your domain name you'll have to either purchase a new one with a free DNS... Read more

Read other 3 answers
RELEVANCY SCORE 41.2

My Gateway computer froze up, so i shut it off by using the power butter. When i turn it back on, all a get is a blinking dash on the top left. I tried rebooting and pressing F8 in order to try a safe mode, but it just goes back to the blinking dash.

A:Blinkiing dash

Hello freyjr

You will need an XP installation CD to fix this. It is OK to borrow one if need be just to run this fix.

Configure your PC to boot from CD if it isn't already set up that way. You may need to enter the BIOS to configure the PC to boot from the CD.
Set the boot order to
Floppy (if present)
CDROM
Hard Disk
SAVE and EXIT

Start your PC with the XP Setup CD in the drive. When you see the "Press any key to boot from CD..." prompt, do so and let the CD-based boot process begin.

When the Recovery Console option is offered ("Press R to start the Recovery Console"), do so. You may be asked which Windows installation to enter, in which case type the number of the Windows installation you wish to work on (usually "1").

When prompted, enter the Administrator's password for that Windows installation. If you did not set a password just press ENTER

At the command prompt, type
fixmbr
ENTER

Then type
fixboot
ENTER

Type
Exit
ENTER
to leave the Recovery Console and reboot the PC

.

Read other 1 answers
RELEVANCY SCORE 41.2

My laptop is a IBM Thinkpad T40, which i had to rebuild using parts from another T40
It has a 1.5 GHz Processor Intel, Centrino Mobile
512MB of RAM
A 40GB HDD
and Windows XP Pro Completely updated
Upon a rexent start up, after turning it off last night normally, it ceased functioning.
Now after the IBM Thinkpad start screen it merely displays a flashing white dash in the upper left corner. I have some files on there that hadn't been backed up. (I back up every Friday it died on a Thursday of all the rotten luck.) Suggestions about what i can do to get it working again?

A:Flashing Dash

Take the drive out, mount it in an external enclosure, attach it to a working computer by USB cord and copy out files that you can access. After that run hard drive diagnostic utilities like hitach drive fitness test and check to make sure it is completely fine before reinstalling in the original computer. You can try booting into safe mode, or last known good configuration or you can try a repair install of the OS. If nothing else works, format and reinstall the OS from scratch.

Read other 3 answers
RELEVANCY SCORE 41.2

Hey thanks for thsi forum i hope you can help me
I removed the dashbar from gator.com :evil: and with addaware
but i still thinking that the local regystry had been modified like the localNRD

Here?s my log :
Logfile of HijackThis v1.98.2
Scan saved at 11:37:54 a.m., on 09/09/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Archivos de programa\Archivos comunes\Symantec Shared\ccSetMgr.exe
C:\WINDOWS\Explorer.EXE
C:\Archivos de programa\Archivos comunes\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\CTSvcCDA.EXE
C:\Archivos de programa\Archivos comunes\Microsoft Shared\VS7Debug\mdm.exe
C:\Archivos de programa\Norton AntiVirus\navapsvc.exe
C:\Archivos de programa\VeriSign\NAVI\naviagent.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Archivos de programa\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\Archivos de programa\TELMEX\Prodigy Infinitum\app\TangoService.exe
C:\Archivos de programa\HighCriteria\TotalRecorder\TotRecSched.exe
C:\ARCHIV~1\VISION~1\OneTouchMon.exe
C:\ARCHIV~1\TEXTBR~1.0\Bin\INSTAN~1.EXE
C:\Archivos de programa\Archivos comunes\Symantec Shared\ccApp.exe
C:\ARCHIV~1\TELMEX\PRODIG~1\app\TangoManager.exe
C:\WINDOWS\System32... Read more

A:I removed the dash bar but...

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box where it says ?Turn off System Restore?. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it?s clean, you may turn it back on and create a new restore point.

Go to My Computer->Tools->Folder Options->View tab and make sure that Show hidden files and folders is enabled. Also make sure that the System Files and Folders are showing/visible also.

Then, open Hijack this and click the ?config? button in the ?other stuff? area. Then, click ?misc tools?, then ?open process manager?. Please ?kill? the following processes (you must kill them one at a time):

TotRecSched.ex e


Make sure to close any open browsers you have. Check and fix the following in HijackThis (make sure not to miss any):

O2 - BHO: i-Nav IDN Resolver - {CE000992-A58C-4441-8938-744CD72AB27F} - C:\Archivos de programa\VeriSign\i-Nav\i-nav_4_2_0.dll
O4 - HKLM\..\Run: [TotalRecorderScheduler] C:\Archivos de programa\HighCriteria\TotalRecorder\TotRecSched.ex e
O4 - Global Startup: Adobe Gamma Loader.lnk = ?
O4 - Global Startup: VAIO Action Setup (Server).lnk = ?
O9 - Extra button: Ayuda de i-Nav - {CE000992-A58C-4441-8938-744CD72AB27F} - http://idn.verisign-grs.com/plug-in/support/index.jsp (file missing)
O9 - Extra 'Tools' menuitem: Ayuda de i-Nav - {CE000992-A58C-4441-8938-744CD72AB27F} - http://idn.verisign-grs.com/plu... Read more

Read other 1 answers
RELEVANCY SCORE 41.2

My latest theme/suite entitled dash! For Windows 7 & 8.1

Includes RocketDock Skin, Potplayer, CAD & Miranda!

Read other answers
RELEVANCY SCORE 41.2

A few times now I have been in internet explorer and then the screen with go back and forth from black screen back to internet screen and back and forth between the 2 for a few minutes and then will hit me with a blue screen with a bunch of writing on it and then will restart. It seems to run fine after the computer restarts itself but this has happened a few times now!
 

A:Screen flips back and forth from black screen to normal then blue screen

Welcome,
Can you provide a few details [remember we can't see or touch your system] about the hardware and software?
Thanks

Read other 3 answers