Over 1 million tech questions and answers.

Wireless turned off after lid closed or sleep (Not Power Management)

Q: Wireless turned off after lid closed or sleep (Not Power Management)

Hello All,

In the last two weeks I have been experiencing something very strange with my Windows 10 Pro. When my laptop resumes from sleep the Wireless is turned off in Windows. I don't believe it was an update because I have defer updates enabled. Unfortunately, I just noticed System Restore was turned off.

1) I have checked the power settings in Device Manager and the device is NOT checked to use power management)
2) I have updated to the latest wireless driver available.

Any ideas would be greatly appreciated.
Edit: I believe this issue has something specifically to do with Sleep because when I reboot or shutdown/power-on the Wireless is enabled and working fine. It only seems to be when Windows goes into sleep mode.

RELEVANCY SCORE 200
Preferred Solution: Wireless turned off after lid closed or sleep (Not Power Management)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Wireless turned off after lid closed or sleep (Not Power Management)

It is common behavior for any devices to be powered down if you close the lid to place into sleep mode.

Read other 0 answers
RELEVANCY SCORE 70

Using a IBM Thinkpad connected to a 32in TV as a Monitor. The power settings already show that Do Nothing is already selected for both lugged in and battery, however when the lid is closed, it still goes to sleep. It feels like there is a simple fix but
I can think of one. Any help?

Read other answers
RELEVANCY SCORE 69.2

My Yoga 920 seems to ranomly wake from sleep when the lid is closed. I'd had several occasions when travelling to find my latop completely dead when I needed it - or finding it burning up in the confines of my bag. A few times, I've been alerted to problem when I happen to hear my laptop make a notification sound. When this happens, the screen is already on when I open the lid and much of the bettery has been used. I've seen this occur both in and out of my bag. Nothing is plug into the laptop other then the dummy USB holder for the pen. I have Vantage installed and all updates have been applied. 

Read other answers
RELEVANCY SCORE 67.6

Yes, indeed the famous sleep problem that everyone seems to still have.

I have searched high and low for other users with the same problem as I do and did not get anywhere. I have a HP Pavillion M7750N for those who care to know with only one addition to it being a M-Audio Delta 44 sound card for Sound recording purposes.

My problem is that when the computer goes on sleep mode (S3) it hangs untill it finaly reboots and brings up an error in windows. In other words I can never have the computer in sleep mode or hibernation for that matter.

Since I did not find any information to help in this process I started to look deeper to the problem and I found a temporary solution. I followed Step 8 in the terrific instruction bellow:

Power Options and Sleep Mode Problems

Doing so I caught that HD Audio Control Panel (RtHDVCpl.exe) was preventing my PC to go into sleep mode.

Now I can go in sleep mode but I lost the ability to control my sound input/output that I kinda liked with Realtek. I tried to uninstall Realtek HD Audio Manager and install the latest version but with no better results.

Reason for this post is one for anyone to use in case disabling Realtek HD Audio Control Panel can do the trick to fix your problem. And second, to request help or comments to fix mine.

Sorry about the lenght of my storry. Great Forum by the way!

**For lack of better words I used the terms that I knew as I'm what they consider a French guy hehe**

A:Sleep, Hibernation & Power Management

Thanks for your input. Will look for a solution.

Read other 3 answers
RELEVANCY SCORE 66.8

Hi all.

I have built a new computer system for my parents and am having some annoying power management problems.

The system specs are:
Asus M4A7TD USB3
Athlon II x4 640
4GB RAM DDR31600
Ati Radeon 4350 1Gb

All drivers and BIOS are up to date.

The annoyances stem from the fact that when the system is powered down from Windows, the machine keeps power through the LAN Port and USB bus, keeping lights on the mouse, keyboard and card reader which is a problem for my parents. I realise that this is normal, and - I believe - so the computer can be woken up?

However, BIOS option for 'wake on LAN/KB/Mouse/USB' etc is all disabled.

There is a setting for energy savings requirement EuP, which when enabled, over rides all other settings, and when this EuP setting is selected and the computer is turned off, all power is switched off, and no lights are left on.

However, if EuP is active, and I set the computer to sleep in Windows 7, there is no way to wake the machine up from sleep other than killing power to the PSU. The power button flashes on and off but does nothing when you press it. Nothing happens with keyboard or mouse action.

However, with EuP disabled, sleep works as it should from Windows.

Is there something I'm missing?

Many thanks.

Read other answers
RELEVANCY SCORE 66.4

I have the same problem with my Lenovo T510 and my new P70.   I setted the sleep mode and hibernate mode to "never" in the Power Management and even use : Performance setting and my P70 always go the sleep mode after 4-5 minutes if the computer is idle. I was able to avoid the problem with my T510 by pausing a video.  That avoid the computer to do in sleep mode (yes the workaround is stupid.. but it works). But that stupid workaround doesn't work with the P70.  If I let my computer without touching it, it will go in sleep mode.  Don't download anything while going to the bathroom. PS.  I have Windows 10 on both my computers. I asked the same question on Microsoft Windows 10 forums and got an answer that reset all the setting to the default value, but that didn't fix the issue.  And now that I have the same problems with two lenovo laptop, I'm not sure that the problem is only with Windows and more with Lenovo drivers.

Read other answers
RELEVANCY SCORE 63.6

I have my lenovo x230 laptop set to sleep when I close the lid. When I close the lid the "sleep" icon on the back of the screen lights up. But the batter will not last through the night on sleep mode. Within five hours or so, the battery is completely drained and I have to plug in and boot up the system. I've never seen such poor batter performance during sleep mode on any other laptop I've ever owned.  Another thread in this forum blames the USB port that allows you to charge mobile phones/etc. during low-power states and recommends disabling the "always power on" option fo this USB port in the Bios settings. I've done so, be it doesn't seem to have helped. At least my laptop still will not make it through the night in sleep mode.  At this point, it seems my ownly option is to use sleep mode only when the laptop is plugged in and hibernation mode when on batter power, which is disappointing. I've never had to worry about this in the past with other laptops.  Perhaps/probably related is the fact that the lenovo ThinkVantage Power Manager (v. 7.16) hangs at the splash screen when I try to open it, so I've been trying to manage the power through the windows control panel power settings.













Solved!

Go to Solution.

A:Lenovo x230 battery drains quickly in sleep mode; power management center won't run

Use powercfg tool from within cmd window (run it with right of Administrator) to check power efficiency.powercfg -energypowercfg -devicequery wake_armed

Read other 5 answers
RELEVANCY SCORE 62.8

Okay, I know there's a problem with the devices going to sleep, and I know that people have a fix which works. The only problem is, my device doesn't have power management:
I really don't know what to do, but I'm definitely not going back to Vista, so will someone please help me?

EDIT: I forgot to mention that the driver installed successfully, and there aren't any updates for it.

A:Wireless Power Management

hello Copyright and welcome to the forums
if you see below where it says power state mapping which says which are supported..
from what i can see this should be supported....
like i said my tut here disables the adapter before the computer goes to sleep so it shouldnt matter whether its power state is enabled...
i cant tell completely if you dont have power management but if you look lower like i have here...

you can see that the S1 S3 states (i think you know what means) are translated into D1 D3 ect and are arranged like you see here in mine i dont have dcap wake from D(X) and my computer can come out sleep fine (used to happend on 7000 x64 but not anymore on 7048)

unless i can see the lower half i can be for certain
if you want you can give vista drivers if you have not tried them..

Read other 9 answers
RELEVANCY SCORE 62.4

Hi, I have the linksys WMP300N wireless card on Win7 32bit. Anyway in the linksys properties there is no power management tab.. I want to uncheck the box that let's windows power down the device. But without the tab I can't. I know it is probably a driver issue for the WMP300N doesn't have the best driver support for win 7 but it works. Anyway was wondering if anyone knew of another way I could access the power management other then wireless properties.. Maybe through the registry?

Any help would be great

Thanks
Boardgame

A:No Power Management tab in Wireless Properties

That means that the device driver doesnt have the feature implemented, nothing you can do.

You can try going into "power options" in the control panel and seeing if you have the option there, but thats the only other place i can think of.

Read other 1 answers
RELEVANCY SCORE 56

My computer appears to sleep or at least put the monitor into sleep mode. Also, I have my keyboard/mouse plugged into an unpowered hub and they sometimes lose connection and I have to replug them. I had an issue with libusb and 64-bit so I removed it. It's a custom build with:OS: Windows 7 Ultimate x64Motherboard: MS-7599CPU: AMD Phenom II x4 955Memory: Don't remember (6gb triple channel kit DDR3 from newegg in december)Graphics: MSI Radeon 3450I've tried managing every power setting possible to no avail.Here is a snapshot of my event viewer:http://pastie.org/952145Any help would be great!

Read other answers
RELEVANCY SCORE 56

 
I get this error message about every 10 minutes, I've had Vista for about a year and it's never done this before.  I have copied the error details and posted them in this thread- please help as soon as possible.
 
Product
Windows Management Instrumentation
Problem
Stopped working
Date
11/5/2008 9:34 PM
Status
Not Reported
Problem signature

Problem Event Name: APPCRASH
Application Name: svchost.exe_Winmgmt
Application Version: 6.0.6001.18000
Application Timestamp: 47918b89
Fault Module Name: FastProx.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a69a
Exception Code: c0000005
Exception Offset: 00035193
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 8ac2
Additional Information 2: ba7e91ebe6e75f08cd0ba76dbcf4ce2a
Additional Information 3: 8ee5
Additional Information 4: 862d5b3ab1983c335905dc41ca81919c
Files that help describe the problem

Version.txt
AppCompat.txt
memory.hdmp
minidump.mdmp
 

A:Windows Management Intrumentation Stopped Working And Was Closed! -Please help!

David
 
This is an error that usually means that the WMI Repository is corrupt.
You will need to refresh the WMI repository.
 
Make sure you are logged in with an Administrator account.
 
Go to Start / All Programs / Accessories.
Right click the Command Prompt and select the Run As Administrator option.
 
In the Command Prompt window type the following command exactly as shown, including the spaces.
 
net stop winmgmt
 
(Press ENTER)
 
Minimize the command window.
 
Open Windows Explorer and navigate down to the following folder.
 
c:\windows\system32\wbem\repository.
 
Select and delete all of the files in the repository folder.
(You will need to OK the UAC prompts)
 
Exit Windows Explorer and bring up the Command Prompt again.
Type the following command.
 
net start winmgmt
 
(Press ENTER)
 
Close the command prompt window, exit any running programs and reboot the computer.
 
When the computer restarts, the files in the repository folder will be replaced with fresh copies.
 
This should stop the error messages.
 If this post helps to resolve your issue, click the Mark as Answer button at the top of this message.

Ronnie Vernon Microsoft MVP Windows Desktop Experience

Read other 4 answers
RELEVANCY SCORE 55.2

I’m working on my daughter’s MSI A6200 laptop running Windows 7, Home Premium, 64 bit.

The computer was freezing up from time to time and then stopped working. It hung up when I tried to reboot. I went to safe mode, used msconfig to turn off all system services and start-up programs, rebooted but no change. Rebooted in safe mode with networking but all network connections are gone, the wireless adapter seems disabled but it does show in Device Manager. Interestingly, the “sleep” light on the laptop is lit. I opened control panel and clicked on Power options but nothing happens.

I downloaded Norton’s emergency bootable recovery tool and booted via a USB drive. I scanned the laptop and it found a virus but I’m embarrassed to say I didn’t write down what it was (I foolishly thought I was done). I ran it again and it came up with nothing. There may be a log somewhere but I couldn’t find it this morning. I have a feeling the virus did some damage before I removed it.

Can you help me repair my laptop? Get my wireless adapter back and resolve the power/sleep mode issue?

Thanks very much!
Steve

A:Laptop only boots in safe mode, no wireless, sleep light lit, no power options

That really, really sounds like a motherboard problem.

To eliminate hardware as a possibility I'd back up the data and reinstall to see if it fixes it or not.

Alternatively, you could try booting it off of a linux live distro CD to see if it keeps up its shenanigans.

People write bugs to do strange things though. Is the sleep light lit prior to windows actually booting, or only when in windows?

Read other 3 answers
RELEVANCY SCORE 53.6

I have a Pavilion g7 series laptop.  I just pulled it apart to replace the fan, and now when I close the lid the laptop no longer goes to sleep.  I did not make any changes in the power options, so I assume I didn't get the laptop reassembled correctly after replacing the fan.  What makes the laptop know the lid is closed to sleep, and where do I look to make sure I get it put back together correctly?  Thanks!!

Read other answers
RELEVANCY SCORE 53.6

I've had about 5 instances where I've closed the laptop and put it in my laptop bag to pull the laptop out an hour later and have it be super hot.  It seems something has hung the system up from sleeping like it should when I close the lid.  I'm sure eventually I'll start getting thermal damage, especially the Samsung 950 NVME drives, so I am a bit concerned.  I usually pay attention now that I know this happens, but occasionally forget like today and worry about the damage that could be caused if it was left for an extended amount of time. Thanks in advance for any help! Laptop is a Lenovo P50 with a Xeon processor. Memory is Kingston HyperX 4x16gb 2400mhzHard drives are Samsung 950 m.2 in raid 0, and a Samsung Evo SSD 

Read other answers
RELEVANCY SCORE 52.8

Hello, I just received an Alienware R2.  I cannot get it to wake up from sleep mode when the lid is closed with my USB keyboard or mouse.  It does wake up from sleep mode with my USB keyboard when the lid is open.  I just updated the bios to Version A05,A05.  Before I updated the new bios, it wouldn't even wake up from sleep mode by hitting the laptop keyboard.  I had to hit the power switch.  
I also have updated the video drives to Version 20.19.15.4312,A04 (Intel HD) and Version 10.18.13.5442,A02 (nVIDIA Geforce).
I am guessing this is still a BIOS problem, but is there a fix?

Thanks.

A:Alienware 13 R2 does not wake from sleep with lid closed

Hello!  So i'm a tad confused.  When you close the lid, the laptop goes to sleep, and when you open the lid it wakes up, but you want it to wake up with the lid closed?

Read other 10 answers
RELEVANCY SCORE 52.8

I have a Dell Studio running Windows 7 Home Premium 64bit, and the laptop doesn't sleep when I close the lid, except I double-checked my settings in the control panel and it's supposed to sleep.

I've had the computer for over 6 months now and the problem first started yesterday, right after I installed the latest Windows updates. When I close the lid, the computer doesn't sleep, but even when I open the lid, nothing appears on the monitor. It's still black and unresponsive, although the power button isn't blinking, so I know it's still awake.

A:Laptop doesn't sleep when lid is closed

Hello ieatlikeawolf, Welcome to the Forum.

Could you answer a few questions?
Does the laptop go into sleep mode if you choose Sleep from the start menu?
Have you tried doing a System Restore to a point before you installed the updates?
Did you install Update KB976902 at the same time as other updates?

Read other 8 answers
RELEVANCY SCORE 52.8

Hi All
This is my first time on any forum so forgive me if I have gone to the wrong place. I have had the common problem of broken hinges on my L50 B. I have replaced both hinges and to all intent and purpose ever thing went well, i.e. the lid opens and closes great now. I have however done something wrong, the laptop now doesn't sleep when I close the lid. I have checked all the power settings and the advanced settings and they are set to sleep when lid is closed. Has anyone any idea what I may have done wrong. Can anyone tell me what the motherboard connection of the lid sensor switch looks like? Any help gratefully received.

Read other answers
RELEVANCY SCORE 52.8

Hi, Sometimes when I close the lid off my Yoga 260 Windows 10 are not going to sleep. The behaviour is really weird because the red light on the lid is blinking like when it's in sleep mode, but I can hear the rotating fan. When I open the lid it's even weirder. Windows are not locked and I am not prompt for a password. The whole system is very laggy. The mouse is moving in jumps and there is not any response to keyboard or screen touch. After few seconds/minutes the system is suddenly OK like nothing happend. This is not happening all the time and I was not able to see any pattern when this happens. What should I do to get rid of this? Thx for help.

A:Yoga 260 Dont sleep when lid is closed

It sounds like a device is having a problem entering the low-power state.  Look in the event log

Read other 2 answers
RELEVANCY SCORE 52.8

I bought this, hooked it up to my monitor and keyboard when at my desk... close the lid and it goes to sleep.  I checked forums, they assure me I can turn this off under power settings... but they of course show images of earlier Windows version.  is this no longer available in Windows 10?

A:Inspirion 15 7000, no sleep when lid closed

So you went to settings-System-Power and Sleep-Additional Power Settings and changed what happens when you close the lid  and it had no effect?
You might open an admin command prompt and type the command below and see what it shows about the Sleep option.
powercfg /a

Read other 2 answers
RELEVANCY SCORE 52.8

My Yoga 700 refuses to go to sleep when I close the screen yet if I log out and with screen open and wait a bit it does go to sleep but will awake if I close the lid I installed to latest software from your site but no difference.I would appreciate any help getting this fixed.Thank you.

Read other answers
RELEVANCY SCORE 52.8

I am not sure when this started, but my P50 is set to sleep on AC or battery after x hours of inactivity. It resumes with the touch of the power button, but all apps are closed.  I have tried setting power settings to allow for hybrid sleep, but this has not helped.  Some posts indicate that maybe apps are closing when resuming from sleep, and not when going into sleep, but i can't seem to find evidence either way.  My system has 64gb of ram and 2 512gb PCI SSD. Any suggestions on where to look? 





* Search box is your friend * I don't respond to PM if question belongs in forum

A:P50 apps closed when resuming from sleep

Now i suspect the machine is restarting or crashing somehow.  I noticed event ID for machine entering sleep, but then event ID 12 - operating system started. Minidump folder has a 0 KB DMP file at that time. Machine was set to restart on blue screen, so tha may be it.  I see minidump files from other dates too, but i have never seen a blue screen. More digging. 





* Search box is your friend * I don't respond to PM if question belongs in forum

Read other 2 answers
RELEVANCY SCORE 52.8

Hey hey, so the problem is i want to leave my laptop running when doing renders that take hours on end. I've disabled the sleep mode in every way that I know how to (see screen shots). When the lid is open it doesn't go to sleep, but when it's closed after about minutes it goes into sleep mode (all fans off etc).

This never happened with windows 7 and i've triesd programs like insomnia which haven't helped at all. Id really love to get to the bottom of this, otherwise I might have to reluctantly revert to windows 7

Anyone offering ideas would be much appreciated. Cheers

A:Unwanted sleep when laptop is closed

Hi safety1g,

FYI, I have seen this behavior before on a few Sony Vaio models, and each time it was referred back to Sony support, where they said the option to "change what the lid does when closed" is/was not supported in their power management scheme and there was no workaround for this issue. So, just consider this an FYI at this point; however, if you can't get your issue resolved quicky, I would spend 10 minutes on the phone with your laptop's manufacturing support group to see if they can confirm a similar issue.

Good luck,

my2cents

Read other 12 answers
RELEVANCY SCORE 52.8

Hi,
first time here, I have about a week experience (pulled out some hair) with windows 8/8.1, but I consider myself pretty comfortable with Windows in general.

When my win8.1 laptop is in sleep mode, I can wake it with a mere touch of my external bluetooth k/b without any issues, as long as the lid is opened. If I close the lid, I can continue to use it as its connected to a big Samsung plasma tv. But if I let the laptop go to sleep (or put it to sleep myself thru the menu), I am unable to wake it back; I need to pull it out from a/v furniture, open the lid and press the power button.

Is this a win8 thing, an Acer Aspire thing, or worse it can't be done?
Anyone else able to wake from sleep their win8 laptop w/closed lid???

Thanks

A:Waking laptop from sleep with lid closed

Try going into the power options and set the option for what to do when the lid is closed to "do nothing".

Read other 26 answers
RELEVANCY SCORE 52.8

I have an odd problem. I've noticed that when I close my XPS 13, it shuts down (as indicated by the annoying front LED) but then later on it will start back up while it's being transported. Sometimes I'll get home, take it out of the computer case, and it will be as hot as a thermal missile because it's been running.
I'm not sure why it would just randomly start up like that? I have the power options to "sleep" when lid is closed, as seen here: http://i.imgur.com/p0x1C86.png.
I don't believe I have malware because I have reset my computer to factory settings on multiple occasions and scanned with SpyBot and Windows Defender.
In Bios "Wake on LAN" is Disabled.
For the life of me I can't think what would be triggering this besides the NSA (I joke). Does this happen to anyone else? Did you find a fix for it? Was it a dell program? Or is there a faulty piece of hardware on this computer?
Any comments/suggestions would be appreciated. Thanks :)

A:Dell XPS 13 powers up after lid is closed and put to sleep

This is happening to me too. Did you ever find a solution? I just got an XPS 13 9360 and the only solution I have found is to hibernate it instead of using sleep, but this is annoying because it takes longer to wake up.

Read other 1 answers
RELEVANCY SCORE 52.8

There seem to be two times this happens. I close my laptop lid (set to sleep when closed) and then when I reopen it, it restarts and then tells me there was a blue screen. When I click on the option to look for solutions online, the pop-up window just closes and disappears. Other times it has happened when my computer was idle for a while, lid open (presumably it went to sleep), then returned to it and power button illuminated, but black screen. Nothing to do but power off - or if I close the lid for a while, it will then restart when reopened.
Seems totally random. Sometimes doesn't happen for days in a row, then twice a day.
Thanks for your help. Sorry I'm not super tech savvy.

Btw...

Toshiba Satellite A665
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
mobo: TOSHIBA PHQAA
BIOS Date: 03/28/11 17:52:56 Ver: AMI APTIO 1.80
6 GB RAM
HDD: TOSHIBA MK6465GSXN
Sound: (1) Realtek High Definition Audio (2) Intel(R) Display Audio (3) Bluetooth Hands-free Audio
GRaphics: Intel(R) HD Graphics Family
OS: Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

A:BSOD - Usually When Lid is Closed, Maybe Sleep Problem

Welcome aboard, anahata.

Your problem seems to be with your usb port/hub. Is there anything connected in the laptop's USB ports when you close the lid? Say any external HDD or something else? If so, remove those, close the lid and follow if it crashas again.

Turn USB selective suspense on to narrow down the possibility to discriminate if it is being cause by the hardware, or the USB hub driver.
USB Selective Suspend - Turn On or Off

At the same time, try to upgrade your NEC Electronics USB 3.0 Host Driver, using the link provided in the page: Driver Reference Table - nusb3hub.sys.

Let us know the results.

Read other 5 answers
RELEVANCY SCORE 52.8

Hi!I have a bizzare issue with my Gen 1 X1 Yoga. The machine will not sleep when the lid is closed. I know this is not a software issue as holding a magnet above the sensor (in between the caps lock and shift key on the left keyboard bezel) sleeps the machine. Does anyone know where / what the magnet is thats meant to interact with this sensor? I assume it is meant to be positioned somewhere in the Screen bezel? if so does anyone know if this is something that could potentially be checked / serviced by a user or will i be bringing my machine to a repair centre.Cheers

Read other answers
RELEVANCY SCORE 52.8

Hi guys hope every things good there, im fine but im facing some issues with my lenovo z580 it started 2 days ago, the laptop just don't go into sleep mode when I close the lid I removed the power management software, reinstalled but nothing the problem remains does anyone faced the same or similar issue before? Any ideas?

Thanks in advance
 

A:Lenovo z580 no sleep with lid closed

What power management software did you remove? You can't remove the windows power management features.
 

Read other 3 answers
RELEVANCY SCORE 52.8

HiI'm using a HP ENVY TouchSmart 15-j198ez Notebook PC running Windows 10 64bit.I have an external display, and it's the only display I need, hence, the laptop lid is always closed. The peripherals I use are:Microsoft Designer Mouse/Keyboard Wireless Kit - BluetoothWacom Intuos 4 Tablet - USBLogitech Rumblepad 2 Game Controlle - USB None of the above mentioned peripherals wake the laptop from sleep. And I am forced to open the lid everytime I need to use the laptop. Previously I was using a Logitech USB keyboard and a Logitech Wireless Mouse (wth USB dongle) - both were able to wake the laptop from sleep with no problem. Gave up on them because I needed the extra USB slots. I also have a Bluetooth speaker set, which led me to belive that the bluetooth connection of the laptop is closing whenever the laptop is going into sleep, since it starts searching for other devices to pair with. This would explain why the mouse and keyboard can't wake the laptop, even though I have checked the "Allow this device to wake computer from sleep" boxes, for both, in the Device Manager dialogue. Any solutions for this?I would also be happy if the tablet or gamepad would wake the laptop. But the "Allow this device to wake computer from sleep" check boxes are greyed out for these devices. Thanks in advance.   

Read other answers
RELEVANCY SCORE 52.4

v3-772g on Windows 8.1 won't enter sleep mode when lid closed. Was working a while ago. All power management settings remain the same. What could be the problem?

Read other answers
RELEVANCY SCORE 52.4

Hi all,
I was just wondering if you can advise on something.
My new laptop keeps waking itself from sleep in my bag. As far as I can tell, the screen comes on and does not turn off and the laptop stays on until it runs out of battery (about 9 hours). This causes the screen and laptop in general to get very hot, as it is in my bag and in a laptop sleeve.
I wondered if it was bad for the screen to get this hot? I know the components can handle it, otherwise the laptop would shut down. But I am worried about the screen.
It is the Asus UX303LA-R4338H. It has a LCD panel (matte, non-touch, if that makes a difference). Windows 8.1.
As for the waking up: I think it might have been waking after 3 hours to go in to hibernate, so I have turned off hibernation in power settings (but I am yet to try this latest change). I have no tasks scheduled to wake the laptop, all devices bar the keyboard aren't allowed to wake it, can't be woken by internet, etc. What is curious is that it when this happens it does not sleep after 15 minutes or turn off the display after 5 minutes, as per my settings. Does anyone have any ideas on this?
Summary:-
1. Is this bad for laptop screen/elsewhere on the laptop to be on, in a closed environment, and this hot for 9 hours?
2. Any further ideas why it might be turning on and then not sleeping after 15 minutes?
THANK YOU IN ADVANCE!

A:Laptop waking from sleep when closed - bad for screen?

It's definitely not good for the battery. Getting hot in the bag isn't god either. If it was me I would do a full shut down instead of sleep mode.

Read other 9 answers
RELEVANCY SCORE 52.4

Howdy folks, I did some quick searching and could not find an answers to my problem and thus am posting here. I have a X1 Carbon 3rd Gen (Type 20BS) with Windows 10 and over the past 2-3 months have noticed the following problem: Problem: After placing the computer into sleep mode via the start button and closing the lid the computer will randomly start back up. I will often open my pc after noticing how overheated it is and find that it came back on and for some reason the touchscreen has been typing and opening applications. Obviously this is very annoying and results in my computer draining its batter and random applications being opened. Any ideas on what may be causing this and how I can fix it?  Happy to provide driver details and any other diagnostics if you think it would help.  Thanks,Andy

Read other answers
RELEVANCY SCORE 52.4

When the laptop is closed, pressure on the laptop will cause it to wake from sleep. There is no option in the BIOS or device manager to disable the wake from sleep option for the keyboard. Here is someone with a similar issue with the ISK1. https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-900-keyboard-wakes-laptop-from-sleep/...  

Read other answers
RELEVANCY SCORE 52.4

Noticed that my Bluetooth headphones are connecting to the laptop while it's supposed to be sleeping with its lid closed.All the settings are configured to put it in the sleep mode when lid is closed. Is there anything else that would cause the laptop to wake up?

Read other answers
RELEVANCY SCORE 52.4

Printer is HP Inkjet
Laptop is VIAO
OS is Vista
The printer works fine after booting, however the printer does not print though the job show printing and the job cannot be deleted in these conditions:
1- the laptop has gone to sleep and is "revived" and then we try to print something local or from gmail or other online doc
2- the laptop is closed but not turned off and when it is reopened and "revived" - same problem

The only way then to make it print is to reboot the laptop - then and only then the print jobs start.

Any idea?
 

Read other answers
RELEVANCY SCORE 52.4

Hello. I know that this problem has been dissuced already here.My device is not a plain Yoga 900, but the(Yoga 900-13ISK2.Is there a bios update that will allow me to make sure that my computer stays sleeping while I move with it? From what I read, the problem seems to be that a key in the keyboard is being pressed and that wakes up the machine.  Thanks!    Doron

Read other answers
RELEVANCY SCORE 52.4

I have the same problem, tried the aforementioned solutions, to no avail. I think this is a design flaw and no simple solution. I suspect some type of viltage control board has failed.It woukd be nice to know what the sikution is, even if it is too expensive to fix.

Read other answers
RELEVANCY SCORE 52.4

I purchased my Hp envy 360 laptop at Best Buy about a week ago. It was an open box purchase because It was in near perfect condition . I tryed charging it but it only charges when it is in sleep mode or either closed . When I plug it in while its in it has a white light and the battery days plugged in ; not charging . But when I close it there is a orange light and a couple hours later it's fully charged . I assumed I had a bad battery but I ran a battery test and it said my battery was fine . Because it charges when it's closed I assumed their was a setting I could just switch but i don't know what to do .

A:Computer only charges in sleep mode or closed

Hello Leroyfour, Please try with system restore i think that should help you with the issue. Steps to do a system restore Open Reset this PC. Go to Start > Settings > Update & security > Recovery and click Get started below Reset this PC.Reset Windows 10, but save your files. On the next screen, click Keep my files and follow the on-screen instructions to reset Windows 10.Reset this PC from Safe Mode. RegardsSATISHP4 Click " Thumb's up " icon if the question is answered/resolved.

Read other 1 answers
RELEVANCY SCORE 52.4

Hi all, hope this is in the correct forum but mods please feel free to move if not.

I've just been given a new Lenovo Yoga 2 by my work and it's running Windows 8.1 Pro.

However, I've lost work several times now as every time it goes to sleep, when it wakes up all of the apps have closed as if it shut down (the sleep light is blinking when it is asleep)! Is this normal for Windows 8 as I've never used it before and it certainly didn't do this in Windows 7?

Read other answers
RELEVANCY SCORE 52

I have a HP DV6 7000 laptop. Battery charging only works when lid is closed (sleep mode). If I close the lid and plug in the charger, the indicator light shows orange, and the battery will then proceed to charge to near full. If I open the lid prior to the orange light changing to white, the battery icon always says: __% available (plugged in, not charging). Several different chargers give identical outcomes. ALL of them will fully charge the battery in about two hours; provided that, the lid is kept closed. If I open the lid, even at say 50% charge, the orange light switches to white, and the battery icon always says: __% available (plugged in, not charging). Thanks, Ed.











Solved!
View Solution.

A:Battery charging only works when lid is closed (sleep mode)

Hi @ElyMayor   Thank you for your reply. The last thing I can suggest trying is a restore back to factory.  Performing an HP system recovery (Windows 7) While doing the recovery there is an option to backup your personal files. If you have not previously done one now is a good time. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7) You can also contact HP support for assistance. They can remotely access your system to help alleviate difficulties.  Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.World Wide Phone Support 

Read other 8 answers
RELEVANCY SCORE 52

I've had several calls with support on this issue and I'm getting conflicting answers (hardware issue to x360 does not have these features) and would love to hear from users alike. I use my laptop plugged in most of the times with external docking station, monitor, keyboard and mouse.  And I have my laptop lid closed so I can pretty much hide the laptop under my desk.  Windows 10 setting is fairly simple where I disabled "sleep" when lid closed.  Issue is that the sleep button does not work when the lid is closed.  I cannot put the computer to sleep or awake by pressing the button.  It does nothing. Also, when the laptop is sleeping (flashing white light on the sleep button) I cannot awake the laptop via external mouse or keyboard.  Nothing.  The only way to awake the laptop is to open the lid, which I have to remove the laptop from my desk slot to do and put it back in once it's awake.  I changed windows setting to allow awaking laptop via mouse/keyboard, disabled docking hub power saving, etc etc. The sleep button by the way works when the laptop is in tablet mode.  But still no external mouse/keyboard awake. Soooo.... 1. Is this issue isolated or do ALL Spectre x360 have the same limitation?2. If you have had this issue and got it fixed, please share your findings/experience.  Ideally, if the power button is disabled by design, then fine, but I would still like to awake the laptop by ... Read more

Read other answers
RELEVANCY SCORE 52

G50-45, model 80E3I have connected a 2nd monitor.In power settings you are supposed to be able to turn off sleep mode when the cover is closed.After changing the power settings I still enter sleep mode when I close the cover.Is there a way to NOT enter sleep mode when the lid is closed, as the power settings do not stop sleep mode from occuring? Thanks for any help.

Read other answers
RELEVANCY SCORE 52

About a month ago, I had my friendly Dell rep dispatch a tech to replace my Bluetooth module and CD drive. Afterwhich, Bluetooth still wouldn't work, and I'm positivie that it's a software issue. I called them back about that issue, and the one I'm asking about below, and according to Dell, my only option is to reinstall windows. He didn't grasp the fact that I couldn't back up my files.

Since the repair, my laptop won't go into sleep, hibernate, or shut down when I close the lid. I also started getting a 'last backup failed' error, and when I try and backup or create a restore point, I get a the 'insuffecient memory for VSS Shadow copy' message with error 0x800423F1.

It will shutdown when I use the shutdown in the windows orb, as well as it goes into some form of sleep/hibernation when I push the power button. The reason I say that is when I open it up and push the power button again, I get a 'resuming windows' message and screen.

Also, I don't think it's a mechanical issue. Reason being, when I close the lid, and open it back up, my mouse will freeze and act drunk for 3-15 seconds. To me that says that for some reason, the program that commands sleep/hibernation is not firing off, or firing off to completion.

I've tried several tutorials/suggestions from this website and others regarding adjusting power settings, disabling wake from sleep in device manager, doing repairs from the windows disk, etc.

I'd appreciate any and all ideas- I don't want to reload Vista... Read more

A:Dell Vista X32 Won't hibernate, sleep, shut down when lid is closed

Welcome
Start with an SFC command
run 3 times if errors are found
System Files - SFC Command

If that does not work, do a system restore from before the problem
System Restore - How to

Read other 85 answers
RELEVANCY SCORE 52

Hello all, I currently have an issue with at least 2 users... When working on a Win10 T450s laptop, docked to an UltraDock with an external monitor while the laptop lid closed, ejecting the laptop(with lid closed but computer on) from the dock does not cause the laptop to automatically go to sleep. I have all Windows 10 settings configured to sleep when it detects the laptop lid as closed. This can be a real problem if the user thinks the laptop is going to sleep automatically and puts in their laptop bag with the laptop on, and potentially cause overheating issues and damaging the laptop. Is there a setting I'm missing or is this a bug? For time being I'm instructing users to manually put their laptop to sleep prior to undocking. Thank You, -Mark

Read other answers
RELEVANCY SCORE 52

Basically, this started happening after I had to shut my computer down via the power button after Windows went unresponsive for 11 hours. After turning it back on the next day, it worked fine, but a couple hours later it started going to sleep while I was using it. I checked all of the power settings, including advanced, and all of them are set to "Never" and "Nothing", including what to do when the power button is pressed or the lid is closed. It still does this.

I checked the event viewer and found a Information level entry for Kernel-Power at the times it went to sleep. The general information for this was as follows (with everything moved to one column, because it formatted weirdly here):

The system is entering sleep.

Sleep Reason: Button or Lid

Log Name: System
Logged: 12/28/2016 11:34:05 AM
Source: Kernel-Power
Task Category: (64)
Event ID: 42
Keywords: (4)
Level: Information
Computer: BlakesLaptop-PC
User: N/A
OpCode: Info

This is from the first one, the others are pretty much the same.

There were no events listed at any level above Information at or around those times. All other entries around those times are to be expected when the computer goes to sleep and wakes back up.

This also seems to happen at about the same part of the day, from 10:30am to 12:00pm.

Another thing that I just found while typing ... Read more

Read other answers
RELEVANCY SCORE 51.6

My google searches are being redirect to various sites and i receive a error message saying "dell wireless wlan card has stopped working" but im still using my wireless internet just fine. They both started acting up after an ill advised download from a bit torrent site. I scanned my computer with malwarebytes and it found some infections but did not do anything for me, then i scanned with avg anti-virus and it found nothing. (malwarebytes and avg anti-virus are the only anti virus software i have and are both fully updated)

My computer is a Dell Inspiron 1501 with Windows Vista Basic
AMD Athlon 64 x2

Whenever im redirected i get 1 of 2 images in the address bar (see attachment)

A:Google redirects + Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.Please download OTL from following mirror:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt <-- Will be minimizedIn the upper right hand corner ... Read more

Read other 2 answers
RELEVANCY SCORE 51.2

I cracked my screen and replaced with a new one.   Now when I close the lid, it won't go to sleep; rather it goes to tablet mode.   I have to press the power button to make it go to sleep.   I put back the original screen and it goes to sleep as it should.   I've tried two different brand new screens and it will never go to sleep when closed.    Lenovo doesn't sell replacement screens so I'm forced to go to ebay or Amazon.   I have checked setting to make sure it goes to sleep when the lid closes.   The magnets are in the replacements.  Hmm, has anyone ever experienced this?  Any recommendations what to do?   Thank you for your input.  

Read other answers