Over 1 million tech questions and answers.

BSOD whenever I plug new monitor in

Q: BSOD whenever I plug new monitor in

Hello,

I purchased an Acer monitor today to use as my second monitor. Whenever I plug the Acer monitor in I get a BSOD right away. I have tried to boot up my PC with just the new monitor plugged in and not my original, and I get the BSOD immidiately after I sign into my PC account. I have tried updating my drivers and restarting many times, no installation CD came with it so I'm not sure if I need to install something for it to work.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: BSOD whenever I plug new monitor in

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 47.6

This is kind of a strange problem, but my monitor plug is missing a few of the prongs that are inserted into the computer. I was wondering if this could be fixed, or do I need to buy a new monitor?
 

A:Monitor Plug

I just had a look at a spare and it seems to have a few holes where you would think pins should be, works fine.
 

Read other 2 answers
RELEVANCY SCORE 46.8

Hello,

Is there any tool to monitor IE in terms of the creating and destruction of plug-in instances?

Thank you

Read other answers
RELEVANCY SCORE 46.8

Pc is hp b6840 but no idea wgerectge actual disk drice is either
 

Read other answers
RELEVANCY SCORE 46.8

I have a little problem...
I have CTX PR705F monitor whch doesn't have drivers(even in CTX homepage). I was sad that it should be found as Plug & Play monitor and work properly. But it didn't, it found it as a standard monitor. So, does anyone know how you can chose Plug & PLay manually?
I tryed reinstallng and 'manually chosing' the drivers but couldn't find plug & PLay
Any ideas?
(I have Win ME)
 

A:Plug & Play monitor

Right-click on your desktop and chose "Properties". That will bring you to the "Display" option in "Control Panel". Click on "Settings", and then on the "Advanced" button near the bottom.

Next, click on the "Change" button near the top of the new window and then look for and select "Plug and Play Monitor". Windoze should be able to find and load the standard Plug and Play monitor drivers for you.
 

Read other 2 answers
RELEVANCY SCORE 46.8

I have an Emachine T-5026 with an Intel 915GAG board. Ubuntu 7.10 is installed. I currently have a SOYO 24" LCD monitor in the system, (1920 X 1200 native resoution).
Ubuntu will not pick this monitor up at more than 640 X 480 resolution. I couldn't find a video driver for the Linux at Intel's support page. What now?

The previous monitor was a Westinghouse 22" at 1680 X 1050 resolution. Ubuntu picked this up at a maximum of 1280 X 1024.

The Intel XP video drivers for this chipset will provide all native resolutions.
 

A:No Plug n' Play Monitor

Perhaps install an inexpensive graphics card which does have driver support for Linux.
 

Read other 6 answers
RELEVANCY SCORE 46.8

I am trying to install a 17" LCD Monitor with a no name LCD controller that has no plug and play capability. I have tried turning off hidden modes (works in 2000 Pro) and changing the monitor type to standard LCD 1280 by 1024. In the display information window it show 1280 by 1024 but it is displaying 640 by 480.

Anyone have a work around this feature of XP Pro? Oh, yes I have tried this on XP Home and it works up to 1024 by 768. Which is better then I get with XP Pro.


Thanks for any help I can get.

A:Non Plug and Play Monitor

check the manufacturers site for a driver for it,but if it is working in pro reinstall your video drivers

Read other 5 answers
RELEVANCY SCORE 46.8

Hi,

I bought a new motherboard (Asus A8R-MVP) and the thing where you plug the monitor is a male and my monitors cable is a male at the end as well. If you don't know what a male and female is, then here's a pic

Do I buy this to solve the problem?

Thanks in advance,
Henry
 

A:Need help with monitor plug and mobo

Yes that would be what you want.
 

Read other 2 answers
RELEVANCY SCORE 46.8

When I boot my system my monitor has 3 of everything on the desk top...( I know my old eyes are bad), but I do the "add new hardware" to correct this every time...any suggestions to help me would be appreciated.
Monitor: Nec MultiSync A500 ( I now old old)
OS: win 98se
 

A:Monitor Plug and Play

Try starting your computer up in safe mode. and check the resolution setting of the graphics. If it is set too high for your old old monitor as you put it, lower the resolution. Try 800X600. Also try setting your color quality to a lower setting.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Having issue on the monitor DisplayPort Hot Plug issue on the  HP EliteDisplay E222.  The monitor wiil lost signal after reinsert the DisplayPort or the monitor power plug.  Did follow the instruction to change both Source Detection mode and DP Hot-Plug Detection mode to Always Active, some of the PC able to recover the screen after hot plug, but some of them failed. Noted that all of the PCs are using Intel(R) HD Graphic 530 Display adapter. 

Read other answers
RELEVANCY SCORE 46.4

Hey! I bought a plug and play monitor with embeded speakers.. The monitor works great! But the speakers do not!!! I have everything plugged in right and it still doesn't work.

The monitor/speakers I bought is the 17 inch LCD monitor by Westinghouse
When I go to the sound and audio devices part of the control pannel, it sais "No Audio Device"
When I go to the hardware part it says that everything is working properly.
I am running windows XP Home Edition
I was thinking my computer is confused and only thinks it is a monitor, but the speaker part has its own seperate plug (the little green type)

I don't know what else to say about it so I guess we can just start with that.
 

A:Plug and play Monitor/Speakers

Read other 9 answers
RELEVANCY SCORE 46.4

I plug in vga cable and nothing shows up. I've tested with a laptop and it work fine it showed up. So it's not the wire or the Monitor . It's the computer but idk what

Read other answers
RELEVANCY SCORE 46.4

I have a PIII 700 motherboard with an on-board SIS 630 graphics card.

I updated the drivers for the graphics card recently, and it works just fine, with one exception - when the computer boots up, it doesn not load the driver for the plug and play monitor!

If I check the display properties (via Control Panel), it seems that the monitor cannot be recognised, and consequently the power scheme settings for the monitor do not work and have to be reset.

If I run the 'Add new hardware' applet, it finds the 'Plug and Play Monitor' immediately, and the system returns to normal!

I have been to the monitor manufacturer site (Logix) and can't find any specific drivers for the monitor. That doesn't seem to be the issue. I assume that it's probably tied up with the order in which things are being loaded, but I can't work out how to alter this?

This one has me stumped. Hope someone can help.
 

A:Can't identify plug and play monitor

Read other 8 answers
RELEVANCY SCORE 46.4

Hi,
I have small Medion laptop computer with LG LCD monitor.

It all worked fine for two weeks but now when I start my PC monitror does not respond. It stays in stand-by mode. If I unplug the monitor it says "Check you input cable" so I guess monitor knows it is connected to a PC but PC won't run it.

What could be the problem?

Thanks

Read other answers
RELEVANCY SCORE 46.4

Hi, I recent came across another monitor, and I'm trying to use it as a dual display monitor (the kind where you can drag things across both monitors, etc). My graphics card is a Nvidia GeForce GT 240 and it has a VGA port and DVI port. I bought a DVI to AGP plug (DVI male, AGP female) since the other monitor has a AGP male plug. However, when I plug it in it isn't detected, nor is it detected when I plug it into the motherboard AGP port. Both monitors work when I use them with the AGP port on my graphics card. Also, in device manager, if they are both plugged in, they both show up.

Any suggestions?
 

A:Extra Monitor not being detected, may have something to do with AGP/DVI plug

I think you mean D-Sub, not AGP. AGP is a type of graphics card slot on the motherboard. On the chance that the adapter is bad, try another brand. They are relatively inexpensive.
 

Read other 2 answers
RELEVANCY SCORE 46.4

Seriously I might expect this with Windows 98 but 12 years later and I still can't plug in a new Samsung SyncMaster 226BW and have Windows set the correct resolution. The correct resolution isn't even available to set manually!

Drivers from the Samsung website are no help. Graphics card is completely up to date.

FFS!

/rant

A:It's 2010 and I still can't just plug in a monitor and have it work

I cannot help but think this is a Samsung driver issue. I have a dual LG display but had to install the driver for each for Windows to permit their respective resolutions. Another, less likely source could be ATi's CCC if you are running same.

Monk

Read other 9 answers
RELEVANCY SCORE 46.4

I just got a new Compaq Desktop computer and was woundering why it detects default monitor insted of the monitor i have hooked up it wont install the driver for the monitor.
 

A:Monitor wont plug and play

Do you have the driver for your display adapter installed? Have you tried installing the monitor driver manually?
 

Read other 13 answers
RELEVANCY SCORE 46.4

I recently upgraded my board and processor from a pentium 450 to an AMD while keeping my drives. I am operating on windows 98se. My new board has built in onboard 64 meg graphics while my old system had on board 8 meg. My problem is, I cannot change the monitor settings. It is set at 16 colors and 640x480 res. I have only two color selections available, 2 and 16.
I have tried various bios changes, driver updates, reinstalling windows and also deleting the device and rebooting.

Any Ideas?
 

A:Plug and play monitor problem

Read other 7 answers
RELEVANCY SCORE 46.4

I am using windows 7 64bit and i have a hdmi cable hooked up to my monitor for my computer, I have it hooked up to the ati radeon 5770 pci express
Every since i upgraded to the latest versions of catalyst everytime i turn my computer on the screen is not the right size about 2 to 3 inches is black and i have to right click on desktop and goto ati control panel and then just click ok to make the monitor use the whole screen i have to do this everytime i start my computer and it is very annoying. How can i get it to save my settings so i dont have to do this everytime i start my pc thanks.

A:Problem with monitor and hdmi plug

Can you set up a profile?

Read other 3 answers
RELEVANCY SCORE 46.4

My monitor is a 17" TFT LCD Monitor made by Hanon Model: L-1715.
The monitor will not turn on as the PSU green light is flashing when I plug it in to the monitor. When i diconnect the monitor from the PSU, the PSU green light becomes constant like it should be, so..
the PSU green light stays constant when not plugged into the monitor.
as soon as i plug the PSU into the monitor the green light starts flashing and my monitor won't work
please help
 

A:Monitor PSU is fine until I plug it in!! WAAAATT

Read other 9 answers
RELEVANCY SCORE 46.4

Hi everybody
My name is Majid , I live in Iraq ,
Due to electric power crisis in my country , I replaced my old , 500 watts monitor with second hand Fujitsu LCD monitor (50) watts , so that I could work on UPS for longer period of time , the problem is the connector is not standard "D" type , it's MDR28 ,28 pin , having a built-in speaker , .
Any body please help me with pin assignment , to convert it to standard "D" type ?

Thank you
Majd
 

A:Fujitsu monitor plug assignment

Read other 16 answers
RELEVANCY SCORE 46

Hi.... You guys helped me so much with another problem, (birthday present for son)...hoping you can help again. Temporarily, my mom has hooked up her computer in our house, but didn't have a monitor, so used our flat panel from our Dimension 2400. We ended up using HERS (not a flat panel, but a newer dell) and tonight I switched them back. Now our my son's Dell flat panel, which is supposed to be a plug and play PLANAR, will not register. The system is using the default VGA and all the text is too big, doesn't give any other display options but 16 bit. I tried turning the computer off for about a half hour and restarting, then unplugging the monitor, turning the pc on, and plugging the monitor in after the pc was started, hoping to see the "new hardware found" msg, but nothing. Why won't it detect the right settings automatically? (I recently also reloaded the entire system from the original boot cd again, since it was really congested). Help anyone?
 

A:Help... Monitor switch, now Plug & Play won't work?

Make sure you have the correct drivers, or plug it into the other vga adapter.
 

Read other 3 answers
RELEVANCY SCORE 46

Hello all,

I have been having a problem with my monitor setup for ages and am now at the end of my tether...so need some help!

I have a Digimate L-1931W monitor, in plain speak, a 19" Widescreen TFT LCD monitor. The screen had been flickering (losing channels) for a while and I have diagnosed the cable as being the culpret (A VGA D-Sub, 15 pin cable). Change the cable you say...which I have done 3 times. Herein lays the problem.

This is where I show my staggering ignorance. The original cable seems to allow my windows XP machine to locate and install an appropriate driver for the monitor, and my Nvidia adapter has the monitor listed as a "M19W". Using any other VGA cable means that the monitor is listed as a "CRT" monitor in my nvidia control panel, and is impossible to change. Being CRT, it gives me no option to have the relevant widescreen resolution (in this case 1440 x 900), and also annoyingly flickers on and off as if it has a CRT gun! (when changing resolution).

Does anybody have any idea why changing a VGA cable would disable the plug and play driver installation from my monitor? Many thanks for any help.
 

A:Plug and Play Monitor Driver Issue

Not fixed...not fixed...not fixed
 

Read other 19 answers
RELEVANCY SCORE 46

Hello genius folk! Help needed please. My PC is on WinXP SP3. My monitor went kerplunk the other day so just bought a used one that I saw working perfectly before I bought it (it's a 17" Relisys). I hooked it up to my PC and loaded through to my desktop fine, except the resolution wasn't great and a white bar stayed in the middle of the screen which read OUT OF RANGE. I looked into this and did the properties>settings>monitor>change values thing and changed the resolution down a step (can't remember what resolution, sorry). I had to do the obligatory restart for values to take effect and it loads through the XP scroll page, then goes black and the same white bar with OUT OF RANGE comes up again and the whole screen is now black - I can't get out of it. Have I messed up my machine? I'm not very techy, sorry. Any clues/help on this would be most awesome. Many thanks in advance. Simon
 

A:Plug n' Pray monitor has left me puzzled - help please :)

Read other 7 answers
RELEVANCY SCORE 46

As said , my primary monitor disconnects as soon as I plug in my secondary one , the secondary one instantly becomes the only one recognized D:
Specs:
nVidia GeForce 970
Intel 4970k
Corsair 16gb ram
thanks for helping :D

Read other answers
RELEVANCY SCORE 46

I recently connected a Gateway VX1130 Diamondtron 22-inch CRT monitor to my IBM computer running Windows XP. The colors on the monitor are way off, even after trying to adjust them using the controls on the monitor itself. There's nothing wrong with the monitor; I got it from my uncle and colors showed up beautifully when he had it on his computer.

I thought downloading the monitor's driver might solve the problem, but every time I try to install it, I get a screen that says something along the lines of it won't install because the computer is using the generic Plug and Play driver instead. How can I get it to recognize the monitor's actual driver instead of the Plug and Play? And more importantly, if I am able to get the official driver to work, will the colors show up more accurately, or would I just be wasting my time?
 

A:Actual monitor driver vs. Plug and Play

Read other 16 answers
RELEVANCY SCORE 46

I have a Viewsonic Optiquest Q7b-3 monitor. For the longest time, it was working just fine on me... until just the other day. Now, whenever I plug it in, it won't turn on. If I hook up the monitor to a PC or a Laptop, the little light under the power button will flash about three times, stop, and nothing will show up on the monitor.

About half a year ago, it did something similar to this, but I was able to fix it by replacing a domed capacitor. It worked perfectly... Up until now, of course. I opened up the monitor, and after looking at all the capacitors, none of them seem bad or even domed this time.

Here's the thing though; while I have it opened up and it's plugged into the wall, I can hear a faint buzzing noise. The faint noise sounds sorta like "Wee-ooh wee-ooh wee-ooh wee-ooh", and will continue until I unplug it.

Anyone have any idea's? It is now trashcan-filler, or do you think it is still repairable?

Any replies will be appreciated. Thanks in advance~
 

Read other answers
RELEVANCY SCORE 46

DVI Monitor cable goes to what socket on the cards? Don't want to try experimenting, I'm quite unlucky at that, Any clues will be appreciated.
 

A:sli video, two 7800gtx's 4 places to plug monitor

since nobody else has answered this, I will chime in here...

With standard single video cards with dual monitor capabilty, it never mattered which output connector you used (the vid card would sense which one was plugged in)... I can only assume that it wouldn't matter in your case either. In SLI mode, the 2 cards function as 1 single card.

I can almost assure you that if it did not state in your video card or motherboard manual which connector to plug the monitor into, then it doesn't matter. when you plug it into any "socket" it will be recognized and configured from there. In any case it won't do any harm to plug it into a different output
 

Read other 1 answers
RELEVANCY SCORE 46

is there an abdaptor i can use and if so where do i buy one my new tower is a HPslimline model 260=p030xt  ------when i bought new tower salesman said evertthing would connect ----old tower was HP PAVILLION ELITE  HPE    THANKS ROR ANY INFO

A:Bought new tower but monitor cord won't fit new plug in take...

@KC-13 Hello;Allow me to welcome you to the HP forums! Here is a link to the specs for your HP tower PC:  https://support.hp.com/us-en/document/c05152614 Under the Back I/O Ports it shows both VGA and HDMI video jacks. You would need an adapter to connect either of these to your monitor, if it does not have either a VGA or HDMI jack.Good Luck

Read other 1 answers
RELEVANCY SCORE 46

I have just reinstalled Windows XP on my computer....Obviously my computer is not picking up my video card, monitor, etc....it is the same monitor that came with my Dell Dimension 2400 desktop computer, How do I make this work?
 

A:My Plug and Play monitor isnt working!

Read other 8 answers
RELEVANCY SCORE 45.2

Just got my new PC, but when i plug in hdmi and power cable it starts up but no signal on monitor?
 

Read other answers
RELEVANCY SCORE 45.2

Monitor displays with red background not normal white background at all websites & oulook & desktop.

could it be damaged plug?
 

A:Monitor displays everytin with red background= could be damaged plug?

Yes,
not sure what type of display we are talking about
BUT
if connected by VGA cable
check the pins in the plug - common problem , bent PIN - we used to get them a lot on projector cables - where used on a laptop and the pin gets bent but the plug still goes intothe socket
 

Read other 2 answers
RELEVANCY SCORE 45.2

I recently got a laptop the hp pavilion zv6000 and figured well cool i can just plug this into my external monitor hook my keyboard mouse etc all into it and have a nice computer so i came on here and asked how to do this becuase i was having problems a member suggested i got to the hp website which i did and they said to press the fn key then the f4 key and it will switch over and i did and it worked after i restarted my laptop it went back to the laptops screen wtf....... so i attempted to switch it back and all it did was my external monitor would flash a litle then nothing so i got mad and just shut the laptop off and walked away from it later i got back on and tried it again and it worked ummm ok..?? why...? thats weird so i was like cool and then i restarted it again and it brought it up on the external monitor again awsome! so i played some games on it to test it out and restarted it here we go again it went back to the monitor on the laptop and now it wont go back to the external monitor is there any way to set the external monitor as the primary once and for all? or untill at least i decide to take the laptop with me somewere in the settings tab of display i see something under monitor 2 that says set as primary device but it is grayed out and it wont let me click it....
 

Read other answers
RELEVANCY SCORE 44.8

Feel like an idiot asking this, but I'm setting up a new z240 workstation & monitor. The monitor came with an HDMI cable. It plugs into the monitor securely with ease. I just can't get the other end to plug into the tower.Am I overlooking something obvious? The plug is in the correct port, connections matching. It just wont click in & I'm afraid of forcing it and damaging the connections.

Read other answers
RELEVANCY SCORE 44.8

With fn + f5 , i have limited option and nothing with internal plus 2 external ...

Perhaps there is ? new driver to do so ...

Which driver ???

Thanks ? lot !!!

Read other answers
RELEVANCY SCORE 44.8

control buttons on monitor do not seem to work properly
have to keep pushing control buttons to make it go away ... then it flashes back on ......... then flashes back off
a major annoyance
that has just started
 

Read other answers
RELEVANCY SCORE 44.4

Hi guys,

I've been rearranging my workspace, and tried to connect my monitor (viewsonic 19in flat screen) with an extension svga cable. The machine powers on and I get a display, but the optimal viewing resolution (the monitor has a little popup message that says 1440x900) is not available as an option when I go into display settings.
When I look in device manager, the monitor is listed as a generic plug/play device. Do I need to manually install a driver from teh manufacturer? Previously, when just plugging the monitor directly to the machine with no cable the display looked fine, but now it doesn't look as good.

thanks,
bp
 

A:monitor detected as standard plug and play when connected with extension cable

You'd be better of with a long high quality cable then using an extension.

Yes, install the drivers from the manufactures website. These will help your GPU set the correct resolution.
 

Read other 1 answers
RELEVANCY SCORE 44.4

Hey there people.

My problem is quite complicated, so bare with me. The problem has lasted quite a few months, me only getting around to trying to do something about it when I had time, seeing as I could just use my laptop for other things I do.

I've been reformatting/reinstalling Windows XP (Either Home or Pro) for quite a while now and have been having trouble with my monitor/video card. I'm not sure which is causing the problem.

So I've been reformatting quite a few times, and after each reformat/reinstall I've tried installing drivers (GeForce 6600 [Both the newest and the oldest versions - have tried both] and nForce 4 series) and after every time I've installed them the Display settings keep showing my monitor as Default, instead of Plug and Play as it use to do about a few months back.

Anyway, the reason this is problematic is that I can't play Battlefield 2 with these settings, and whenever I try to my computer shows an Out of Range message.

I'd really appreciate any help with fixing this problem.

Cheers.
Liam.
 

A:nVidia 6600 - Display shown as 'Default Monitor' instead of Plug and Play

Read other 6 answers
RELEVANCY SCORE 42.8

Hi
I've been having some BSOD lately when I plug in a usb memory stick. At first it could happen during games and at start up.

I first thought it was the program "magicdisk" that was the problem. One of the BSOD blamed it on a system file used by that program, but after Uninstall I still get BSOD.
I tried to revert back to an old system image, but that didn't help. And it also added "magicdisk" back, but this time I couldn't uninstall it. It said it was already uninstalled, but the registry files was still there. So I tried to clean out any remaining files and drivers from the program.

I have followed the posting instructions and attached a crash dump.
I would be very grateful if someone could take a look at them and see if they can spot the problem.

A:BSOD when I plug in a usb

  
Quote: Originally Posted by Turkletoon


Hi
I've been having some BSOD lately when I plug in a usb memory stick. At first it could happen during games and at start up.

I first thought it was the program "magicdisk" that was the problem. One of the BSOD blamed it on a system file used by that program, but after Uninstall I still get BSOD.
I tried to revert back to an old system image, but that didn't help. And it also added "magicdisk" back, but this time I couldn't uninstall it. It said it was already uninstalled, but the registry files was still there. So I tried to clean out any remaining files and drivers from the program.

I have followed the posting instructions and attached a crash dump.
I would be very grateful if someone could take a look at them and see if they can spot the problem.


These are verified and Related to nusb3xhc.sys USB 3.0 Host Controller Driver from NEC Electronics Corporation. I would re-install the newest driver available.

Read other 6 answers
RELEVANCY SCORE 42.4

Mine is a assembled system (not branded) and I experience recently BSOD when i plug usb drives, specifics.

I am not getting this when i plug my phone or portable hard disks. but on some usb sticks (1-8 GB size) most of the time getting BSOD. attached the diagnose files as you instructed. pls help to analyse and advice on the fixes

A:BSOD when plug usb drives

Various different bugcheck codes are there.
BugCheck A, {52025561, ff, 1, 834ce30f}
BugCheck BE, {8ba31604, b20b5962, 8f0d9964, e}
BugCheck 50, {20028, 0, 834b910f, 8}
Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. A screenshot before closing memtest86+ will be nice.

Read other 1 answers
RELEVANCY SCORE 42.4

hi

from time to time when i plug in a flash ( stick ) into my usb ports, 1 out of 7 times i get a BSOD

i've made a clean install again, no programs installed and i'm still getting BSOD

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1048

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80003163FB9
BCP3: FFFFF88002A55700
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

A:BSOD flash plug in

  
Quote: Originally Posted by jmagic


hi

from time to time when i plug in a flash ( stick ) into my usb ports, 1 out of 7 times i get a BSOD

i've made a clean install again, no programs installed and i'm still getting BSOD

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1048

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80003163FB9
BCP3: FFFFF88002A55700
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1



Hi and welcome

his crash was caused by fastfat.sys It is used for fat formated drives. Originally from vista, should have been replaced if you did a clean install

I would run a system file check
type cmd in search>right click and run as admin>sfc /scannow

If you are overclocking STOP.

Ken

Read other 7 answers
RELEVANCY SCORE 42.4

Recently, i have BSOD everytime i plug USB Devices like External HDD or USB Flashdisk, it's not happen when i plug USB Mouse

this the zip

Read other answers
RELEVANCY SCORE 42.4

Hello everyone,

I'm in desperate need of someone helping me to find a solution cause i have found nothing at all to fix it.
The issue is that everytime i plug a USB Flash pen on any of my USB ports i get the BSOD screen with the error IRQL_LESS_OR_NOT EQUAL...

if anyone can share some info on it or maybe links to fix it i would really be great.

this is my PC specs:
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Model: ASUS P5Q3 DELUXE @ Wi-Fi n
BIOS: BIOS Date: 05/26/09 21:34:55 Ver: 08.00.14
Processor: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
VGA: NVIDIA GeForce 8400 GS
Sound Card: Creative SB X-Fi Fatality Pro


if anyone needs any additional information please let me know so that i can give them.

Thank you in advance for any help.

A:BSOD when i plug my USB Drive

please folow this instructions:
http://www.sevenforums.com/crashes-d...tructions.html

Read other 6 answers
RELEVANCY SCORE 42.4

Hello,
This is my first post to that forum .
My pc crashes from time to time mostly when i plug in a usb stick to usb3 slots mostly.I reinstall all my drivers did hdd test/memtest and everything seems to work perfect.So im confused what happening and i need your help.
im posting also the .zip file as instruction
said.

A:BSOD when i plug in usb stick mostly (f4)

You are running a Lenovo Product ID (PID) on an MSI board.
This makes your installation counterfeit.
Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.

Code:
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Moustakias
Registered Organization:
Product ID: 00426-OEM-8992662-00497 <-- Lenovo PID on MSI board
Original Install Date: 3/8/2014, 12:26:07 PM
System Boot Time: 12/21/2015, 1:25:33 PM
System Manufacturer: MSI
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.

Read other 2 answers
RELEVANCY SCORE 42.4

i've just built my new comp and i've bought the razer megalodon 7.1 headset it seems to work on all other computer besides the one i just made every time i go to plug it into a usb port is get the bsod with IRQL_NOT_LESS_OR_EQUAL i've tryed all my ports and all my usb ports are 3.0 last time i did it, it short circuited my power supply and as far as i know all my drivers are up to date i hope some one can help.

thanks
 

A:bsod when i plug in my headset

IRQL_NOT_LESS_OR_EQUAL typically indicates a driver issue. Uninstall, reboot, reinstall the Razer software/drivers.
 

Read other 1 answers
RELEVANCY SCORE 42

I'm getting a BSOD everytime i plug in a USB into the laptop. This happened the first time yesterday. I tried again with the same pen drive, BSOD again. Tried with another, BSOD again. Although when i connected my phone through a USB cable, everything was fine. I could access the phone.

64 Bit Windows 7
OEM
Laptop is about 3 years old.

Attachment with gcgriff2 and perfmon.

A:BSOD everytime i plug in a pen drive

  
Quote: Originally Posted by strangelove101


I'm getting a BSOD everytime i plug in a USB into the laptop. This happened the first time yesterday. I tried again with the same pen drive, BSOD again. Tried with another, BSOD again. Although when i connected my phone through a USB cable, everything was fine. I could access the phone.

64 Bit Windows 7
OEM
Laptop is about 3 years old.

Attachment with gcgriff2 and perfmon.



These were Related to PDFsFilter.sys PerfectDisk OptiWrite Filter Driver for Server from Raxco Software, Inc. I would remove it at least to test.

Read other 3 answers