Over 1 million tech questions and answers.

Network see only after Ping test window 10 tablet to window 7 desktops

Q: Network see only after Ping test window 10 tablet to window 7 desktops

Hi All - Thankyou in Advance

My issue is all the network can see each other but when u send or transfer to or from the tablet win 10 - It cannot send through wireless network even through you can tend to see all networks name on the network list etc BUT after ping 192.168.1.1 it shows 1st test no response and then 2nd to 4th shows ping 32 and 64 successful etc then I click on network and can see / Send files to all networks or the network you choose etc as Previously but NOW you can send and receive files etc - it will only work after you ping - any ideas how to solve this ? Just a head up i was thinking its along power management in WiFi but it doesn't have a setting for it on window 10 ?
and make things worst after i think about 30 minutes or so you have to ping again to see network etc

It appears something going to sleep mode or power saver mode etc but wifi or network i cannot see any information or power mangement ? Please Help - This is doing my head in !!ha

Also Try drivers update and window 10 update no change

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Network see only after Ping test window 10 tablet to window 7 desktops

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 83.6

I am using Windows Virtual PC - XP mode and my Laptop is using Windows 7 64 bit. 
how can I ping from my Windows 7 to Xp Mode and from XP mode to Window 7?
The XP Mode is inside my Windows 7.

Window 7 Ipconfig /all as Below :
Windows IP Configuration

   Host Name . . . . . . . . . . . . : SMYB2M-000818
   Primary Dns Suffix  . . . . . . . : xxx.net
   Node Type . . . . . . . . . . . . : Mixed
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : xxx.net

Ethernet adapter Local Area Connection 3:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Loopback Adapter
   Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Autoconfiguration IPv4 Address. . : 169.254.252.81(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection* 12:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Anchorfree HSS VPN Adapter #2
   Physical Add... Read more

Read other answers
RELEVANCY SCORE 76.8

hi.
i am using windows xp home on a wireless router while my bro is using windows xp pro on the LAN of the router. he is able to access my pc after i shared my drive but i couldnt access his at all. his is also shared and i hav set up a small network with the same name. i can see the name of his pc but i couldnt enter. the error msg reads :
" \\name of pc is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if u have xs permissions. Logon failure : the user has not been granted the requested logon type at this computer"

my bros pc is on Norton antivirus 2005. and both our service pack is SP1.

thanx
 

A:window xp home cant connect to pc with window xp pro on a setuped small network

Read other 12 answers
RELEVANCY SCORE 76.4

This is a weird question to ask but here it goes. I'm running windows vista 32bit and have an application that hosts a bunch of other windows inside of it. The app can only have one instance running at a time and I am limited on desktop space. Is there any way I can span the host application across some virtual desktops so I can open more of the windows and just switch desktops to view them?

Thanks in advance for any input.

A:Span window across multiple desktops?

If you have an ATI graphics card, you could try installing Hydravision. One of the feature is it lets you have multiple virtual desktops.

Read other 3 answers
RELEVANCY SCORE 76.4

Hello,
I hope someone have a solution on this.  I cannot ping window Server 2012 Domain Controller with DHCP services.  We are using IPv4 but when I try to ping from command prompt, I get general failer (see below)
Pinging server.domain [2002:c00a:102::c00a:102] with 32 bytes of data:
General failure.
General failure.
General failure.
General failure.
I noticed that the IP it is using is IPv6 which I am not using IPv6.  I can ping the 2012 server by IP address but not by hostname of the server.

Read other answers
RELEVANCY SCORE 74.4

hello friends, i just upgraded my laptop hp g62 (intel pentium  p6100 @2.00ghz) to window 10 since then have not been able to coonect to wifi network, whenever i wanna connect it says unable to connect to this network have tried to update the drivers using lan cable but whnenever i uses wifi it doesnt connect. am frustrated. pls i need ur help to fix the problems. thanks

Read other answers
RELEVANCY SCORE 70

Issue in IE11:

when parent window had a alert triggered, that makes the child window lose focus and go behind

Scenerio:

There is a button in parent page (domain A) and on click of the button Popup window (Domain B) will open and child window will communicate back to parent window. when parent window had a alert triggered, that makes the child window lose focus and go behind
only in IE11 browser.

IE edge and other browsers we can see the popup window on top of the parent window. 


is there any fix to retain popup window on top of parent window until user closes the popup(child) window.

Read other answers
RELEVANCY SCORE 68

Whenever I try to open a new window while in tablet mode, a rectangular appears on my screen as if a new window is trying to open then my screens begins to flicker like crazy until I exit tablet mode. Does anyone know why this may be happening? I would like to be able to open two browser windows and have them stacked side to side while in tablet mode like I would if I were to have multiple apps open. Is this even possible? 

Read other answers
RELEVANCY SCORE 68

I know this sounds silly. But currently I am working on a kiosk and just want to start the Tablet PC Input (keyboard) and immediate minimize it. Is there any setting I can try under Window 7? Because every time I open the Tablet PC Input, it would be centralized on the screen. I want to start it and it immediate hide to the left without clicking anything.

Thanks in advance

A:Can I hide the Tablet PC Input to the left on startup for Window 7?

Hi Hikigaya,

I tried, but could not find a way to 'minimize' the 'Tablet PC Input' interface when not in use. The utility offers an option to 'dock' the 'work area' in different parts of the screen. You may want to place a shortcut of the application on the 'desktop screen'. That will allow you to launch the program directly from the 'main screen' and close it when not in use. On closing the application, the program gets refreshed (Current data gets lost if not saved). However, the 'Tablet PC interface' hides itself and can be retrieved by dragging it from the left side of the display screen.

To create a shortcut, click the 'Start icon' > Type 'Tablet' in the 'Search text box' > Right click 'Tablet PC Input Panel' from the 'search results' > Go to 'Send To' > Select 'Desktop (Shortcut)'

You may want to have a look at the following video that I tried creating for you; please check the attachment.

Hope this helps.

Read other 1 answers
RELEVANCY SCORE 68

The tablet ran out of power during a factory reset and bricked (windows doesn't boot up). I tried to fix it by trying to boot from usb with windows. However I made a mistake and set efi as the second boot choice. The tablet does not boot from usb for some reason and goes straight in to efi. I'm unable to access BIOS during boot.

Questions:
How do i access the BIOS from efi ?
Why doesn't windows boot from usb as it should ?

Any help would be much appreciated as I am stuck on what to do next, I am not an IT specialist but I have a basic understanding.
 

Read other answers
RELEVANCY SCORE 67.6

Hi,

Once again, a real newbie here.

I have configured a "new" computer for our workgroups network. All seems to work OK, but if I try the following command from the main server:
C:\Documents and Settings\User 1>ping 192.168.3.66

Pinging 192.168.3.66 with 32 bytes of data:

Request timed out.
Request timed out.

Ping statistics for 192.168.3.66:
Packets: Sent = 2, Received = 0, Lost = 2 (100% loss),
Control-C
^C
C:\Documents and Settings\User 1>

What might be causing this problem?

For more information, please see a related "solved" issue that I posted some days ago entitled:
"Solved: logical name for the ip address of a node in a Windows XP Worgroup"
This seems like the inverse problem.

Thanks for your help.
Andynic
 

Read other answers
RELEVANCY SCORE 67.6

Good evening ladies and gentlemen! I have some Hard Drive related questions!

I've got a home server with a couple of failing hard drives, and a need for expansion. To that end, I'll be investing in four 2TB Seagate Barracudas (ST2000DM001).

Why that drive?
I've had half a dozen multiple models of Barracudas for a number of years that have consistently operated with no issues (in fact I've never had a HDD fail on me in the 15 years I've been using PCs, my 4GB Maxtor is still going strong), but when I invested in four 750GB Samsung drives, two of them failed within a year. Could be coincidence, but to be on the safe side I'll stick with Seagate Barracuda from now on.​
Anyway, this is a very significant monetary investment for me. I don't earn a lot and while I've wanted to fix my machine up for over a year now, I've not had the money (especially with the HDD price boom that's thankfully dying down now). I want to start using the server to record Live TV and CCTV, run Steam Big Picture, and continue to serve as growing file storage for my home, so the extra storage should give me plenty of breathing room for a long time to come.

So, I need to give these four new drives a thorough vetting before I put them into active service, and before the returns window for them closes!

I've never actually done any in depth HDD testing though. I don't know what (free) software/methods would be best to use, what I'm look... Read more

A:How to test new HDDs for faults within returns window?

Read other 8 answers
RELEVANCY SCORE 67.6

I have successfully turn DEP but when I go to do a test I get an error message windows explorer has closed. What idiot at Microsoft worked on this up date. I have been getting this message since Sept.09 Can any one help.

A:help got DEP off but my window Vista still closes explore I need to do test

what exactly is your issue? was DEP shutting down explorer? what made you come to this conclusion?

Read other 2 answers
RELEVANCY SCORE 66.4

I have installed window 8 on my desktop. Before July 29, 2016, I have upgraded it to window 10. now I had some issue in my system. I have formatted the system but now I am fail to upgrade again for window 10. May I upgrade it again? If yes, what is the
link and processor to upgrade the same?

Read other answers
RELEVANCY SCORE 62.8

Window Media Player is a strangely behaving when I try to play either audio CD or Video DVD.
Some times I could play audio CD and sometimes I can record CD and save it in my personal computer. 
May I doing something wrong?

Read other answers
RELEVANCY SCORE 62.8

Whenever I add an attachment to my emails, and even here on your website when I uploaded the attached pics, the 'Choose to Upload' pop-up window containing (in this case) my pics ALWAYS (but never used to) opens in the Details mode instead of Thumbnails where I can actually view the pics to be attached prior to attaching them.
I would like the default setting for this occurrence to obviously be in the Thumbnails mode.

In a related issue I would also like to be able to load more than one pic at a time when attaching pics to emails, etc...
Is there such a setting?

Thanks for the assistance
 

A:Default Settings for 'Choose File To Upload' Window, Window displays 'Details' vs 'Th

Read other 15 answers
RELEVANCY SCORE 62.8

Hi Everyone,

I am not sure which Windows update caused this, but ever since that download, whenever I close a window, the little blue disc keeps turning until the window DOES finally close. (Hope you understand what I'm saying.) This happens after closing EACH window, ALL the time.

Essentially, it takes a few extra secs for the closed window to really close. It's irritating/frustrating because I don't know how to fix it. I've put as much of my comp's info in my profile as I know or could find. Have been working with comps for six or so years. Not a total dummy, help alot of friends , and always reaching to learn more.

Have never seen this problem anywhere or it would be fixed by now, lol Can't STAND the waiting it causes til I can move onto something else.

Any suggestions?? PLEASE???

CompInfo: Vista Ultimate, IE8--See Profile for more.

I thank you for your time.

A:Closing a window causes little blue disc to turn til window finally DOES close

Welcome
Lets try two steps to see if we can fix the problem
Assuming that you are using IE go to>tools>internet options>advanced>resest and see if that helps.
Second try with clean boot to see if some software is behind the problem
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If it works follow the instructions to find the precise cause

Read other 6 answers
RELEVANCY SCORE 62.8

i couldnt think of how to describe it for the title easily and I am about to go home to maybe tomorrow I will work it out.

My Vista box is currently demonstrating curious behaviour. When I open IE7 I select a favorite and it opens a new window with that favorite in it. If I do a search with my default provider in the original window, the search results appear in a new tab in the second window.

The second window does not display this behaviour. It works normally with my standard settings - open favorites in the current tab.

Again, favorites chosen in the first window continue to appear in the second window. Search results too.

Running IE7 in safe mode stops this behaviour but I have not installed any new software and I have removed all my temporary internet files/addon settings etc.

Any ideas would be great. Funny old game eh
 

Read other answers
RELEVANCY SCORE 62.8

Hi,
Thanks for all the help. I want to make my shorcuts start programs and windows (In WIndows Xp Pro SP3) at a certain position and with a certain size.

For instance I want to open Excell at position 20,30 (x,y) with a window size of 750 x 200, or maybe a internet explorer window at position 129, 357 with a window size of 562 x 397.

I gave the odd numbers in the example so that people responding will understand that I want CUSTOM SIZES. I know how to set the shortcuts to start maximized and minimized and also window tiling. That's not what I'm talking about. Does anyone know of shortcut switch that I can use?

For instance in some games if you want to start the game with cheats enabled, you put "-devmode" after the directory path in the "target" box of the shortcut properties.

Is there any other way?

There is an awesome program called "Montage3"
http://www.ideaxchg.com/montage/

which I use, but isn't exactly what I'm looking for. Please help out.

Read other answers
RELEVANCY SCORE 62.8

Been messing with this for days. When I open the Control Panel I do not have the option to switch the view on the left side pane. All that is there is the See Also window. I went to view, Toolbar, Customize and added the views icon to the toolbar. As long as I keep the customize toolbar box open and move it up or down I can see it on the toolbar. Once I close the Customize Toolbar window the view icon grays out on the tool bar. My back button is the same way. I checked in another users window and the control panel is fine. I have Windows XP SP3. I am the Admin on the PC. Any help would be great.
 

A:Category and Classic view window missing on Control Panel window

In the Control Panel window click on the Tools tab > Folder Options, click on the "Show common tasks in folders" button and click OK or Apply. That should restore the Category and Classic View options.
 

Read other 8 answers
RELEVANCY SCORE 62.8

I used to be able to hit cntrl-n and open multiple windows, but now, it opens in the same window. I was pretty sure there was an option in internet tools to change this setting, but cannot find it. Can someone please help me?

I'd greatly appreciate it!

Thanks in advance!
 

A:Only able to open one browser window at a time..cntrl-n opens page in same window

Read other 6 answers
RELEVANCY SCORE 62.8

well i ordered a studio xps 9000 and i forgot to ask my dell salesperson about how my free mcafee subscription be renewed if i install a window 7 free upgrade from a window vista?well my mcafee free subscription be gone forever or is there a way for me to get it back???

A:mcafee free suabscription be gone forever if install window 7 from window vista?

Me too

Read other 1 answers
RELEVANCY SCORE 62.4

I have official windows ten installed on my system , But the real time protection of window in window defender does not turn on . what can I do ?

Read other answers
RELEVANCY SCORE 62.4

i want to update window media player.my pc is window 7 ultimate 32 bits.how can update wmp.
pls official link me wmp.OR pls link me the best pc store for my win 7.

Read other answers
RELEVANCY SCORE 62.4

I have a Lenovo N580 laptop. Last week, I had to do a factory reset (with help from Lenovo Tech Support) because of compatibility problems with new software from my employer and windows 8.1 which is actually worse than windows 8. The compatibility problems caused my screen to go black. When booting, the Lenovo logo appeared and I had a cursor, but nothing else accept a black screen. I tried suggestions found here and the Lenovo help forum, but none worked and the factory reset was the last resort. Now I am back to using Windows 8 (this was actually the second factory reset due to other problems caused by win 8.1).

Anyway, everything is working (for now) and I also have Classic Shell installed. HOWEVER, before this second factory reset, when I had multiple windows open, aero peek worked fine. Now, it doesn't. I followed earlier suggestions of right clicking the taskbar, then clicking Properties, but the box for "Use Peek ..." is dimmed (grayed out) so I cannot check it to enable aero peek.

I got used to this feature in Win 7 and was glad to see it in Win 8, but it is the only feature about Win 8 and 8.1 that I like. Thanks for your help.

A:Window doesn't open full screen when hover over IE window

Right click on the Taskbar and select Properties.

Read other 2 answers
RELEVANCY SCORE 62.4

When you move a pop up window too high the title/tool bar of the child window is hidden by the main window's tool bar/title bar. As a result the child window is stuck and can not be resized or moved back to the original position or any where you can see
the whole window. Though you can scroll the contents and all the window itself is stuck. The child window never gets the focus back. Unless you close the main window you can not get the child window back to its normal position.
Is there any way that you can move the whole window (not just the contents) back to its original location or maximize that inner window only. Any short cut to move the window only results in moving the main window not the child window. 
Thx.

Read other answers
RELEVANCY SCORE 62.4

Whenever I search in W7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to W7?

Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in W7 to act like Vista, so the file opens in a new window?

Thanks!

A:Adding 'open in new window' to search results, & opening in new window

assume this option was there on your windows 7 earlier? did you make any changes to your computer recently?

Read other 6 answers
RELEVANCY SCORE 62.4

Hi ,

I am developing a BHO in C# that is using Win32 Window with the toolbar , In all the scenarios in IE6, IE7 XP, Vista and IE8 Xp this window is displaying correctly on before IE window i.e it is showing in front, But in Vista IE Protected mode ON, this window is showing behind the IE Main Window,

How to Bring this window before the IE main in Vista Protected Mode ON.

Is there any security restrictions for this ?

Any Help would be appreciable

Kumaravel

Read other answers
RELEVANCY SCORE 62.4

Hi,

I am using Windows Internet Explorer XP - Version 6.0.2900.2180.xpsp_sp2_rtm.040803_2158.

Recently I've noticed that I cannot view in full screen anymore. Let me explain. I created a website that lets a user enter their name and social # and then choose a test in 1 of 3 languages. Once you choose a language, a new browser window opens and the test/information is displayed in this new window.

Since end of last year, it worked correctly. A new browser window would open and it would be in full screen mode. You could NOT see the very top of the page - where it gives you the page title, and the options to close the window, or minimize/expand it.

Now, all of a sudden, it displays all that information - title, close option etc. Does anyone know why this is? And how I can put it back to being full screen?

FYI - I think this may have something to do with a service pack upgrade within the last couple weeks but am not positive. Also, I know that lots of people were having issues with the Service Pack 2 and all the bugs.

Can anyone shed any light on this issue and what I can do to fix it?
Thanks.
 

A:Window XP Browser Window Not Displaying in Full Screen Anymore.

Read other 10 answers
RELEVANCY SCORE 62.4

hello folks, im running an amd athlon 2700 chip and windows xo pro..
now i dont think my system has to many issues affecting performance but something that is really peculier is when i shut down my system i get the following
"hidden window not responding" and "peer listen window not responding"
ive tried doing some research on the net regarding these but can find really no reference for it.
im wondering if that can be cause by someone listening in on an open port if yahoo mesenger is open? ive tried to clos yahoo messenger and then shutting down and sometimes i dont get the msg and other times i do any ideas?

and of course here is the hijack log
im sure i got more issues than im aware of
kinda like opening the proverbial can of worms aint it?

btw i know i have some "spyware from retrospect " on this machine.. but that is self installed to watch others activity.. previously when i needed it ..

Logfile of HijackThis v1.99.1
Scan saved at 11:54:54 PM, on 4/7/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\progra~1\mcafee\MCAFEE~2\MssSrv.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\S... Read more

A:hidden window & peer listen window issue & hijack log

The first thing you should do is to go to add/remove programs in the control panel and remove any references to viewMgr and also new.net .... then repost your log ....
 

Read other 2 answers
RELEVANCY SCORE 62.4

Hi guys I have strange problem when I open a window as a dialog and from this window want to open report as well as dialog but the report opens as a form type and under the first window, which is not good to me I need to see the report dialog window as first. Do you have any idea??
The code I am opening the report window is
DoCmd.OpenReport "SC_Cd", acViewReport, , , , acDialog

Thank you very much
 

A:VBA Access a report window dont stay as dialog window

Read other 10 answers
RELEVANCY SCORE 62.4

I would like to be able to open a new browser window in Firefox which would start at the identical location to the one that's open rather than opening at the home page.

In IE, File / New / Window works well for this purpose, and then if you wanted it to start at the Home Page, you could just run Explorer a second time.

It gives the flexibility of going off on other trails with the additional window, but still having the original window open. I'm not crazy about tabs which take up extra space in the browsing window. However, is there even a way to open a new tab at the same location as the current window? Maybe I'm missing the joy of tabs somehow and am stuck in my old way of thinking. Still, I would like to know if what I want is possible.

Thanks.

A:[SOLVED] Open new browse window at same location as current window

Hi I don't think that is an option but I understand what your after and this is the way I do it with keyboard short cuts of

Ctrl + C = copy (While holding down Ctrl tap the C key once)
Ctrl + V = paste
Ctrl + T = new tab
Ctrl + N = New page

OK starting with tabs which I think is the best thing since sliced bread. You have the page open that you want to start with go up to the URL at the top of the page (do it with this page) click only once on the URL this will highlight it or if you like to say select it.

Now to copy the URL Ctrl + C your computer will remember this link until you either copy something else or you shut down the computer.

Now we open a new tab Ctrl + T a new blank tab will open and the URL location is blank but with the cursor already in it so we paste the URL there by Ctrl + V and tap the enter key and you have the duplicate page

Now working with a new page there is just a couple of small differences.

You have the page open that you want to start with go up to the URL at the top of the page (once again do it with this page) click only once on the URL this will highlight it or if you like to say select it.

Now we open a new page with Ctrl + N a new page will open but the difference is it will not be blank it will be your home page so as there is already a URL that we want to get rid of. The simple way is to once again click on it only once to select it then paste the saved URL by Ctrl + V and tap the enter key and ... Read more

Read other 8 answers
RELEVANCY SCORE 62.4

Hi ,
My Window 8 automatically Window Update and now some of the icon missing
Anyone encounter this and possible to fix this ?

A:Window 8 Build 9200 RTM After Window Update Some Icon Missing

Hi kezn715, welcome to the forums, go to Installed Updates, uninstall one by one and see which update causes the problem and hide that update.

Read other 6 answers
RELEVANCY SCORE 62.4

After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode...anyone have any ideas of what to do from Safe Mode to return my boot up back to normal? All Help is appreciated

A:Window 7 Start-Up Repair completes but window fails to boot.

Work through these steps for Troubleshooting Windows 7 Failure to Start
starting with full Malwarebytes scan in Safe Mode with Networking.

Read other 5 answers
RELEVANCY SCORE 62.4

After about 10 minutes of being booted up, my computer acts very strange:

If I have a window open - any window (i.e., any application), and I click on the X (upper-right-hand corner) to exit the application, the application ends, but the display does not go away. In other words, the application has in fact ended, but the window stays on the screen.

Similarly, if I merely minimize the application, the display stays on the screen, even though in fact the application has been minimized.

I am running Windows XP Pro SP3

I've run everything, including combofix

A:Minimize or close (exit) window, window stays on screen

Hello hepplewhite212,

Could you please give me just a tad more info please? When did this start? And, do you happen to use Firefox? I see you ran ComboFix, but it looks like this started before you did so I'd like to rule that out for sure as well.

Thanks,
tea

Read other 10 answers
RELEVANCY SCORE 61.6

As Edge browser doesn't support modaldialog, I want to pass some value to another window using window.open
From a parent window say A, trying to open another window - ChildWindow.htm using window.open. I am unable to pass string value from A.


var dialog = window.open("Child_Window.htm?", "title", "width=550px, height= 350px,left=100,top=100,menubar=no,status=no,toolbar=no");

dialog.MyVariable = "some string value";
dialog.opener = window;

In Child window, I get undefined reading the variable in the second window.


window.MyVariable 

Read other answers
RELEVANCY SCORE 61.6

Hi folks,
I really want to move from windows vista to windows 7, i currently use window vista business os 32bits on my hp compaq 6730s but now i feel its outdated and want to move to probably window 7 ultimate or which version do you think is best? i need your assistance on how to download the one with genuine key. I have checked muy system with windows 7 upgrade advisor and i got these reports, find report in attachement pls.
Thank you in anticipation.
Wakss3.
 

A:Help, i will like to upgrade my window vista 32 bits to window 7 (HP laptop)

Read other 10 answers
RELEVANCY SCORE 61.6

dear sir/madam, 
I am stuck in package.xml bootrapper thing. Could you please provide you suggestion on it.
I have 32bit window application which has SQL Server 2008 express and .Net Framework 4.0. Application creates new SQL server 2008 Instance with "SQLInt", which is working fine on window 7 .
then i have migrated it to window 10 64bit and updates its prerequisites to SQL Server 2012 express and .Net Framework 4.6.2.
All working fine, sql server install and instance created without any issue, but facing only one issue with reinstall process.
When i run my application setup.exe file, it always download/install Pre-install component and failed because component(SQL server instance "SQLInt" already existed.
I have package.xml bootstrapp file, which has one condition. please find below
 
 <InstallChecks>
    <RegistryCheck Property ="SQLInstance" Key="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL" Value="SQLInt"/>

  </InstallChecks>

<InstallConditions>
      <BypassIf Property="SQLInstance" Compare="ValueEqualTo" Value="MSSQL10.SQLInt"/>

<InstallConditions>       
-------------

but setup.exe not checking registry for this key.
when i checked in registy, SQL Server instance created in "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Se... Read more

Read other answers
RELEVANCY SCORE 61.6

I was just wondering if there was XP hack or some small add-on freeware that would add to the taskbar or a desktop shortcut a simple toggle to quickly toggle between "Open each folder in the same window" and "Open each folder in it's own window"? Thx.
 

A:XP experts. Is there any way to ---toggle folder options--New Window/Same Window?

I don't know the answer, but playing around I found something that may serve as a workaround if you do not find something better.

I'm set to open folders in the same window. When I right click on a folder the first two menu items are usually Open and Explore, but sometimes they are reversed. If I select the 2nd item I get the folder opening in a new window.
 

Read other 3 answers
RELEVANCY SCORE 61.6

what do i do my window 7 has "this copy of window 7 is not genuine build 7600" and my system is slower than before.i used HIJACKTHIS software to scan it, please who can analyse it for me. the log file reads:Mod Edit: Removed malware log data, see No DDS, HijackThis, or ComboFix logs should be posted in this forum. - BleepingComputer.com - http://www.bleepingcomputer.com/forums/forum-56/announcement-45-no-dds-hijackthis-or-combofix-logs-should-be-posted-in-this-forum/ ~ Hamluis.

A:my window 7 has "this copy of window 7 is not genuine build 7600"

You need to provide basic information about the system manufacturer and model...what your problems are...when they began...any onscreen error messages, etc...if you really want someone to be able to guess at what might be wrong with your system.

"This copy of Windows 7 is not genuine" messages...occur for any number of reasons, none of them have anything to do with malware.

Simply put...reactivate Win 7, either online or via telephone.

Louis

Read other 2 answers
RELEVANCY SCORE 61.6

Hi,
I need to capture video of my Windows 7 screen operation and I found a very disturbing thing
what can be wrong while captureing. When I move a window it's background app does not refreshing but then when the window header is released.

My screenshot to see the problem:
https://dl.dropboxusercontent.com/u/...2015.44.46.png

I tried these options in Windows 7 but nothing could solve.
https://dl.dropboxusercontent.com/u/...2015.47.57.png
Thanks in advance!
Szabolcs

Read other answers
RELEVANCY SCORE 61.6

I have been having problem with my computer. I can't get online playing game the window close buy itself and the memory is to low I try to defragged. But every time the computer turn on the screen say memory insufficient. And when I open an program the message pop up say the memory is come to minimum. I lost everything I don't know where I put the computer disk at. With out the disk can i upgrade my computer to Window Vista? Or can I just go buy another Window XP to fix the computer first? Can you help me fix the problem above? Which software should I used to fix my computer? I don't have any money right now to get another computer.

* Remove temporary Internet files
* Remove any downloaded program files
* Empty the Recycle Bin.
* Remove Windows temporary files.
* Remove installed programs I no longer use
* Defragged.

Thank you very much I have try everything but nothing work. Can I just upgrade my computer. Please try to help me thank you again.
 

Read other answers
RELEVANCY SCORE 61.6

Hi,

This may sound stupid but i need to relocate the window close and resize buttons to the lower part of the window instead of the top so i can move the window to the upper part all the way up and it doesnt bounce back. Is it possible?

Thank you.

A:Can i move the X window close button to the bottom of the window?

Any answer please?

Read other 3 answers
RELEVANCY SCORE 61.6

My previous post:
http://www.bleepingcomputer.com/forums/t/493706/winlogonexe-application-error/
 
 
DDS log:
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 9.0.8112.16476  BrowserJavaVersion: 1.6.0_33
Run by KaraBang21 at 15:06:56 on 2013-05-09
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.8167.7046 [GMT -4:00]
.
AV: Norton Internet Security *Disabled/Outdated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Norton Internet Security *Disabled/Outdated* {D8BEB080-B73A-17E3-1B37-B6B462689202}
FW: Norton Internet Security *Disabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Windows\system32\svchost.exe -k imgsvc
C:\Windows\System32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\SearchIndexer.exe
C:\Windows\System32\WUDFHost.exe
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\system32\taskhost.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Media Player\wmpnetwk.exe
C:\Windows\system32\svchost.exe -k LocalServiceAndNoImperso... Read more

A:Window 7 runs slow and layout looks like window 2000

Hi  karabang
I will be handling your log to help you get cleaned up. Please give me some time to look it over and I will get back to you as soon as possible.
White Warrior
 

Read other 7 answers
RELEVANCY SCORE 61.6

I have a set of scheduled tasks, all of which run programs written in Open Object REXX. Consequently, the Command Prompt windows where these tasks runs inherit their icons (at the top left of the window) from the rexx.exe program that handles my scripts.

This means that all of these REXX tasks display the same icon in the taskbar, or system area, which is unhelpful.

I doubt that there's any way of influencing the icon from my REXX code itself, but is there some sort of wrapper program that I could run, which would allow me to choose different icons for each of the scheduled tasks? Perhaps by running my REXX from some program other than a Command Prompt window?

I'll also go and ask the REXX community, so we'll see who gets there first!

I realise that this is something of a long shot, but if I don't ask, I'll never get...

A:Setting the window icon for a command prompt window

  
Quote: Originally Posted by swiftie


[I]s there some sort of wrapper program that I could run, which would allow me to choose different icons for each of the scheduled tasks?


You're asking us how to create a Shortcut.

Read other 9 answers
RELEVANCY SCORE 61.6

I just got a new laptop with Windows 7, 64 bit system.
When I open an email...it opens correctly, but when I want to double click for the next window to open, I have to have toRIGHT click that window and instruct Windows to "Open to new Window".

Is there any global command that can activate this procedure automatically.
Thank you
Dieter
 

Read other answers