Over 1 million tech questions and answers.

FIPS 140 Compliance While Running Application

Q: FIPS 140 Compliance While Running Application

When you change the following registry value to "1", is FIPS enabled in realtime or does the machine need to be rebooted?

HKLM\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled

We require FIPS 140-2 compliance on all machines running WinZip. I was wondering if it was possible to enable FIPS when WinZip is opened. FIPS breaks several sites, applications, etc in our environment and trying to find the best way to be FIPS compliant so
that WinZip runs in FIPS mode. FIPS is not needed for anything other than WinZip at this point. Any suggestions?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: FIPS 140 Compliance While Running Application

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 67.2

I am currently unable to backup recovery information to Active Directory from any of my Windows 7 machines.
The error I am receiving is "Group Policy setting requiring FIPS compliance prevents recovery password from being saved to Active Directory"
I have the FIPS group policy "System cryptography: Use FIPS compliant algorithms" set to disabled for the entire domain, and have run an RSOP on the machines which shows that the policy is not enabled anywhere else.

In the local group policy on the machines it shows that FIPS is disabled as well.

Help!

Read other answers
RELEVANCY SCORE 65.6

What are the requirements for an existing application to be comaptible on Windows Vista RC1? How they are different from " Works with Windows Vista" requiremnts?

A:Requirements For Application Compliance.

I suspect that you'll have to contact Microsoft on MSDN to find that out. But, since Vista has gone RTM, I suspect they aren't very concerned with RC1 right now.

Read other 2 answers
RELEVANCY SCORE 65.2

I have a web based application and want it to port it on Windows Vista . What are the procedures I must follow to check for its compliance on safe deployment on Vista?

A:Web Based Application Compliance Testing

Let's see. I have no clue, but if I think about it, it must be:
Does your web server software work properly in Vista?
Which flavor of Vista do you plan on using?
Do you have the hardware to support it?
Have you checked into any of the documentation?
If you have checked into the documentation, promptly ignore it, set up your own test box, and see how things shake out. If what you find out on your own correlates with the documentation, then you might start to have some confidence.

That's where I would start if it were me. Essentially, a web service comes down to the web-server software, some sort of a middle tier, and I would imagine some sort of database. Are they compatible with Vista?

Read other 2 answers
RELEVANCY SCORE 47.2

I wonder if someone would be able to have a look over my log?
Win32/Somoto.A application and Win32/ELEX application found after running eset online scanner and deleted, i am not sure if I have any other nasties hiding so your help would be very much appreciated?

A:Win32/Somoto.A application and Win32/ELEX application found after running eset online scanner

Please post any logs that you have. We will be more than happy to have a look.

Read other 1 answers
RELEVANCY SCORE 46

Hi everyone, hop this is the best forum for this question.  I am in need to find information on Microsoft's Encrypting File System and if it is FIPS 140-2 "certified"  Any help would be appreciated.
Thanks

Eric Vanderveer

Read other answers
RELEVANCY SCORE 45.6

I was messing around with my firefox options in my browser options today and i came across some thing called enable fips
It was under security_devices in my firefox options. can any one tell me what it is and should it be enable.....thanks
 

A:Solved: enable fips

Read other 7 answers
RELEVANCY SCORE 45.6

hello
i have an M6500 that i recently installed a fingerprint reader in. i was running win 7 and machine was in great working order. after i loaded the drivers for fips my computer freaked out and i fresh installed win 7 OS. at that point things got really bad.
at that point i used a dod scrubber program to wipe all ssd drives and started completely over. i reinstalled win 7 and could not get it to update, of course IE 11 would not update. after a lot of research i found there is an update by MS in june/july for win 7 that keeps win 7 from updating without it.
so i scrubbed all drives again and removed ssd #2&3. at this point im very frustrated and just cant understand MS and Dell with drivers that dont work, updates that basically disable an OS, blah blah whane.
i ended up installing fresh win 8.1 and reinstalling ssd's. win 8.1 updated and system is now operating normal. though the control vault is for "NO" fingerprint reader. also the device manager does not see the physical device, i assume that is due to having no drivers for device.
if you could help me out with this i would really appreciate it. i have spent a year upgrading and refurbishing this machine. i really like it and would like to get this fixed. my knowledge with hardware is good, but my software experience is lacking and limited. thank you all in advance.

Read other answers
RELEVANCY SCORE 45.6

It appears something in 1.8 is using non-FIPS compliant crypto. I had to remove our ATA server from our regulatory compliance groups in order to get the web app to work correctly. With this issue, authentication no longer works and the ATA center displays
a blank page. Did MD5 start getting used in 1.8 for authentication? Error below:

2017-07-27 15:07:52.3767 3980 11  fee81822-c43a-437d-9b61-6f9240ec2546 Error [RuntimeMethodHandle] System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.InvalidOperationException: This implementation
is not part of the Windows Platform FIPS validated cryptographic algorithms.
   at System.Security.Cryptography.MD5CryptoServiceProvider..ctor()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Security.Cryptography.CryptoConfig.CreateFromName(String name, Object[] args)
   at System.Security.Cryptography.MD5.Create()
   at [email protected](Stream item)
   at [email protected](IOwinContext context, CancellationTokenSource cancellationSrc, Stream itemToCheck)
   at Owin.OwinCompre... Read more

Read other answers
RELEVANCY SCORE 45.6

Hi,
We are a FIPS compliant shop. We have smb signing turned on. Currently we have not enabled FIPS on the windows shares.
We are having issues mounting CIFS shares onto our FIPS compliant Linux servers. It seems that while FIPS can be enabled and sec=krb5 used to mount SMB shares, it is not possible if smb signing is turned ON.
In order to be compliant can we safely assume that smb signing is a "subset" of FIPS, turn smb signing OFF and enable FIPS mode on the windows servers?
Thanks in advance.

Read other answers
RELEVANCY SCORE 45.6

A while back one of my programs didn't launch. I received an error "This implementation is not part of the Windows Platform FIPS validated cryptographic algorithms". I learned how to disable FIPS using Regedit. The problem is that every time I reboot the computer, the FIPS registry key gets re-enabled.
I'm trying to find out how to permanently remove the FIPS stuff from my computer.
I don't know what actually caused the FIPS issue to start up in the first place.

Thanks.

A:Trying to permanently remove FIPS from my PC

Hi Read the Link below ... It should be of some Help ....
Public Knowledge Base

Read other 3 answers
RELEVANCY SCORE 45.2

I ran across this in my device manager and I am not sure what Fips.sys is for. I tried to update driver.....no luck. I also tried to uninstall and reinstall no luck. Any suggestions?
 

A:Fips error in device manager

What device was it listed under, i.e., computer, disk drives, system devices?

Mollie
 

Read other 2 answers
RELEVANCY SCORE 45.2

Here's a little thread of my own for a change.

The machine is a Dell Precision 690 running XP SP3, fully updated. For no apparent reason it failed to start in Normal Mode yesterday, flashes a blue screen and restarts, and resists all attempts to make that Stop Error Message stand still. It starts in Safe Mode with Networking and allowed MalwareBytes to load and scan, finding 35 treats in the Quick Scan, all of which were fixed and after a restart, found nothing else in the Full Scan.

The system will not allow Spybot or SAS to be installed, citing administrative policy but AVG finds nothing and HJT reports no strange activity since MBAM did its job. Event Viewer tells me Fips and IntelPPM failed to load on the Normal Mode startups and that could be the problem. I've changed the Start code from 1 to 4 in the Registry to no avail but am a bit squiffy about changing it to 0. Does anyone reckon there's merit in deleting those keys completely?

For whatever historic reasons, there are no SR points to which to restore and no-one in that office knows the Administrator password and without messing around with Dell RAID drivers, I can't even get to the Repair option.

Checkdisk promises to start on the next restart but does not. sfc /scannow cannot operate in Safe Mode - that's what I call safe!

Suggestions welcome, with thanks in advance.
 

Read other answers
RELEVANCY SCORE 45.2

Is there anyway to verify that a hard drive was properly bitlockered in FIPS mode? If a drive was encrypted originally with the FIPS encryption policy turned on, and then later it's turned off, is the drive still FIPS compliant?

Thanks

Read other answers
RELEVANCY SCORE 44.8

After setting up Remote Assistance in group policy for our domain, I can easily use it when not in FIPS mode by typing: msra /offerra
However, if I have FIPS enabled on the PC I run this command from, the Remote Assistance session doesn?t connect.
reg add HKLM\SYSTEM\CurrentControlSet\Control\Lsa\FipsAlgorithmPolicy /v Enabled /t REG_DWORD /d 1
But it works again if I disable FIPS:
reg add HKLM\SYSTEM\CurrentControlSet\Control\Lsa\FipsAlgorithmPolicy /v Enabled /t REG_DWORD /d 0
It doesn?t matter if the other computer has FIPS enabled or not, just the helper computer that issues the ?msra /offerra? command.  How do I configure Microsoft Remote Assistance to work with a Windows 7 workstation in FIPS mode?

A:FIPS support with Microsoft Remote Assistance?

By default, the connections are encrypted when using Remote Assistance, as it uses RDP. Remote Assistance dosn't support FIPS encryption, but RDP does. Hence, you can configure RDP to use FIPS encryption.
Regarding FIPS encryption with RDP, you can have a look at the following link:
http://technet.microsoft.com/en-us/magazine/ff458357.aspxBalaji Kundalam

Read other 4 answers
RELEVANCY SCORE 44

My computer is freezing and shutting down automatically after 5 - 10 minutes after its turned on.
Event Viewer shows Intelppm and Fips driver Cannot load during boot
Following are the specifications of my PC:

Dell Laptop
Windows XP ..

I have various updates from Microsoft : SP3, IE8 and many more security updates (Almost all till date).

The same happens in Safe mode also.

I tried to restore the system also but no use..

Kindly Help.
 

Read other answers
RELEVANCY SCORE 44

I am trying to disable this security setting. I've done it through the Local Security Policy GUI and through the registry.
Each time I make this change and then reboot, it's back enabled again. I can't find why it keeps getting enabled.
Is there anything that will cause this to be re-enabled? Already verified that it's not through group policy.

Read other answers
RELEVANCY SCORE 44

I just received my M7710 with Windows 10 Pro 64-bit.
I'm having problems with the fingerprint reader from the very start. During fingerprint registration it frequent gave me a message to the effect 'unable to detect fingerprint and to clean the reader'. I eventually tapped the reader enough that it completed the registration process.
Of course the machine is brand new and it's the first time the reader has been touched by me. It looks clean.
When I try to login using the reader, the same general thing occurs. It doesn't recognize my fingerprint even after multiple attempts, and then finally either does or doesn't in the end.
So do I have a faulty reader? Is it a poor device I paid extra for? Am I doing something wrong when registering my fingerprint?
I'm simply putting my index finger on the reader, picking it up and putting it down again.
Thanks.
Tom

Read other answers
RELEVANCY SCORE 43.6

Dear Bleepingcomputers and friends,
 
I need you guys' help!
 
Have a  customer that need help getting PCI complaint [1] at five of her facilities.   So far I only have two thing left to figure out.  I only have available Window XP Pro sp3 machines to do this on. 
 
1)  I need to set up an internal IDS/IPS [2] scanner.   Antivirus doesn't count (PCI's insistence).  Wireshark?
 
2)  I need to set up an FIM [3] system on each computer with credit card information (PCI's doesn't care that the information is encrypted).  Again, Antivirus doesn't count (PCI insistence). 
 
 
 
Many thanks,
-T
 
1)  http://www.pcicomplianceguide.org/pcifaqs.php
 
2) Intrusion Detection System, Intrusion Preventions System
 
3) File Integrity Monitoring
 
 
 
 

A:need help with PCI compliance

price is everything in this question... Establish that and you can pretty much just Google it.
 
Also establishing training and user outlines/ skill-sets would be beneficial... As those XP machines could be nixxed and you could do it very cheap/free if they have decent users...

Read other 7 answers
RELEVANCY SCORE 43.2

I am currently operating XP Pro 32 bit and Directx 9. In a few days I will be installing from scratch Vista Home premium 64 bit.

What I am not sure of is whether my CPU is compliant with Directx 10.

It is an Intel Pentium D 915.

I have searched Intels site for hours to no avail.

Does anyone have an answer for me please?

Regards

cogs06

A:Directx 10 Compliance

For DirectX 10 to work you need a graphics card that is capable eg ATI HD 2000 series or above

Vista is capable of running DirectX 9 and 10 so you wont need to upgrade your graphics card unless you want to use DirectX 10

Read other 10 answers
RELEVANCY SCORE 43.2

Hello all,

while evaluating a new enterprise tool for our company a question was asked to the suppliers if their software is Vista compliant. One solution only requires a thin client with IE 5.5 or higher to use and say that they will not check if their software is Vista compliant as Vista uses IE 7 and they have tested with IE7 and Windows XP and it works fine.

Is there something that could prevent their software from working in Vista? Should we require them to certify Vista compliance?

BR Martin

Read other answers
RELEVANCY SCORE 43.2

Not sure if this is the correct forum for this question...
Recently had a PCI Compliance Scan performed which I failed for the following reason: "Firewall UDP Packet Source Port 53 Ruleset Bypass".  I am using Windows Firewall in Windows 7 Pro and the only place I can find any rule that specifies
port 53 is Core Networking DNS (UDP-Out).  I am not sure if I should disable this rule or not.  Or should I block port 53 in my wireless router?
Thanks in advance!

Read other answers
RELEVANCY SCORE 43.2

I purchased a usb type c spectre late last year (the rose version with i7 and 512GB.  It generally works well but so far the power system is very disappointing.  The basic issue is I purchased this device specifically because it purports to be USB Type C compliant.  That means I should be able to charge the device with any usb type c charger provided it meets the technical specs (e.g. 45 watts and so forth).  But it doesn't.  Instead, the software settings seem to make it in effect a proprietary set up.  If so, this is objectionable and possibly contrary Australian consumer law.  The problem is that I can only charge the device with the supplied charger.  The first issue is the charger is excessively heavy and bulky.  Why does the world's slimest and lightest laptop have such a bulky charger.  It's comparable to the laptop itself.  This is just dumb!The second issue is I can't use the rest of my USB Type C set up including a large battery, and a charger in my car.  Nor can I use my phone charger.  So I have to drag the HP charger everywhere.  The third issue is that only 1 of the 3 ports actually charges other devices at the USB Type C spec.  The 2 lighting ports are not USB Type C at all - they are just 3.1 with a usb type c connector.  So they only charge the phone at 20 per cent, the phone won't transfer data, and various peripherals such as a bluetooth keyboard/mouse don't have enough juice to... Read more

Read other answers
RELEVANCY SCORE 43.2

Hello,
Can anybody tell me of a good company that provides information about Compliance management? Someone recommended the site "infolocktech"
Any recommendations on this?
_________________
Dual DVD Recorders Football News
 

Read other answers
RELEVANCY SCORE 43.2

Is there a plan to make MBSA Section 508 compliant (American with Disabilities Act)?

Read other answers
RELEVANCY SCORE 43.2

Hello,
We are using Windows 8.1 currently in a Fax Appliance. this used by medical and financial offices around the country.
We need to know if Windows 8.1 currently meets HIPAA standards for compliancy. We understand it is no longer in mainstream support, and exist now in a state of extended support and will be EOL by 2023. 
If this product does not meet HIPAA compliance standards we need to know now.
Thank you,
Ron.

Read other answers
RELEVANCY SCORE 43.2

I'm working on a government project that includes using PowerPoint slideshows on the internet. If you're at all familiar with the government, you're aware that there is a MAJOR push to make sure all files on the internet are 508 compliant (accessible to users with disabilities.) I'm hearing from some folks that PowerPoint is NOT 508 compliant, while others say it can be MADE compliant. (In my digging around, I found a download that claims to walk you through making a PP slideshow compliant.)

Has anyone out there run into this situation? Have any suggestions?

Thanks in advance!
Terry
 

Read other answers
RELEVANCY SCORE 42.8

Hi everyone,
I am currently working on an application running in Windows 7 Ultimate, and it has to be FIPS 140-2 compliance.
As far as I have researched in https://technet.microsoft.com/en-us/library/security/cc750357.aspx, there is a kind of validation process which consist in set a policy setting (secpol.msc) for using FIPS algorithms. The other step consist in checking that
a few binaries (cng.sys, bcryptprimtive.dll) are the same version than the validated from NIST. http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm#1328
I am having troubles with this last step, the thing is that I cannot find any place where it is said how to modified these binaries, e.g. hotfix, downgrade separatly these binaries, ...
Could somebody help me or clarify me this issue? Is it necessary to have the versions from NIST validated list?

Read other answers
RELEVANCY SCORE 42.8

Hello everybody,

I am having some major problems with my computer. I'm on Windows XP SP3 and around a week and a half ago I found that my computer would freeze soon after I logged on. The computer becomes totally unresponsive and nothing works.

I can log on in Safe Mode, where I found in Error Reporting that the following drivers failed to load on start up - Fips, Intelppm, SAVRT and SYMTDI.

I have recently done several antivirus/malware sweeps, using my antivirus programs and combofix, hijackthis etc - so I now believe my computer to be malware free.

However, the problem remains so I am now faced with a Windows/HDD problem and I am stuck and do not know what to do next.

Could any experts on here offer me any advice? It would be greatly appreciated.
 

A:Computer Freezes - Drivers failed to load - Fips, Intelppm, SAVRT, SYMTDI

Howdy,

Do you have the Operating System disc?
 

Read other 3 answers
RELEVANCY SCORE 42.8

Hi Team.

I have a client with banking operations.

Long time send MBSA report about scanning servers to Regulatory Office.

There is documentary support about MBSA meet some Regulation, Process or Standard?

Thanks

Read other answers
RELEVANCY SCORE 42.8

Update: Installation successful, at the cost of one RAM module (remove from system), as suggested in this thread.
However, boot still fails with 2 modules in place.

Original Post:
Hello, my version of Windows 7 has failed to install, both at boot and within windows XP. The in-OS install failed, generically stating that it couldn't read the files it was looking for. (It REALLY needs a details tab for IT experts. It could have been my raid drivers, which seem to be running afoul in other OS's...s) The boot install didn't even start stating that my BIOS was not fully compatible with APCI.
However it is a feature-laden Gigabyte model from this year! There are no BIOS updates in regards to ACPI.

MA790TX-UD4P motherboard....

In my next installation attempt I will mount the ISO with Emulation and install from there, at least until restart.

Full system specs in my profile...

Edit: I've taken a look at this thread, I should note that I have no onboard video and only have access to an Nvidia 9800 GT with this motherboard.
I will attempt the removal of the 2nd DIMM as suggested on page 2.

A:ACPI Compliance Failure? REALLY?

Welcome SI5K,


Sounds like you have been reading some posts first, good start. Must give you a for having your system specs in place. I have found in several of my installs of Win7 that the Bios settings were rather confusing as to how ACPI was enabled or not. So I just made several attemps until I got the right one recognized by Win7 install. that's just one thought. What Build # of win7 are you installing? How did you burn the DVD? 4x speed? seems to work best for most members. You did not state how much memory you have, but you say you took 1 stick out & attempted an install.

No Over-clocking of CPU, right ?

We can start here & other members will jump in with their thoughts, also. Sounds like all the right hardware, just some minor bugs to configure correctly.

" Doc "

Read other 9 answers
RELEVANCY SCORE 42.8

Hopefully this is the right forum to post in..
I do IT work and am expanding into medical practices. I understand they must be HIPPA compliant and i was wondering if I need to be certified/take a test or anything to be able to even do IT work for a medical practice (third party IT). Some have said i need to have some certification to see the confidential patient information and I was wondering if any of you could maybe be more specific and show me what requirements they must meet or what certification I need to get to legally be able to work on their stuff, being I will be exposed to private patient information. 
 
Thanks

A:HIPPA Compliance/Certification?

No, there is no certification required.  However, you do need to be fully aware of the HIPAA laws and the security systems on the computer and any transference of data must be HIPAA compliant.
 
For more information, you can read these:
 
http://www.hhs.gov/ocr/privacy/hipaa/faq/securityrule/2003.html
 
http://www.hhs.gov/ocr/privacy/hipaa/understanding/
 
http://smallbusiness.chron.com/hipaa-certification-2810.html
 
Orange Blossom

Read other 4 answers
RELEVANCY SCORE 42.8

Here's my situation. We have 4 systems that get remotely used. How ever we have been upgrading to be PCI-DSS compliant. We now need a way for these specific users to gain remote access to their desktops. Here are my thoughts but not sure which is best. So I'm just looking for your quick thoughts on this.

1. VPN that is PCI compliant. Then remote desktop from within the VPN. Would this still be PCI compliant? We have a Netgear FV338 router that is VPN pci compliant, but 60 bucks a client.

2. Use a 3rd party app such as go to my pc. That claims to be PCI compliant. I find these to vulnerable to changes in PCI compliancy. Will these actually pass our test?

I am just looking for options or if anyone has come across this situation?

Read other answers
RELEVANCY SCORE 42.8

Hi guys...an odd question here and I am mad at my IT Manager !!

Being a network Admin in-charge, i want to enforce a few policies at help desk. One of them is, not to create any user account unless an email arrives from HR to HelpDesk, informing of the user's badge ID, the department he/she belongs to. The status of employment and all those things. The procedures are in place but sometimes it so happens that some head of the Dept. call our IT Manager over the phone, or send him an email directly whcih is then forwarded to our Help Desk incharge who is then left with little options but to create the account without due processes.

HelpDesk incharge is bound by his position to defy IT manager and he is scared to tell me (sometimes he does) that IT manager is forcing him to dilute the AD account creation policy.

I don't want to confront IT manager based upon inputs by Helpdesk guys but would rather put a mechanism in place, where I would automatically come to know, that an account has been created and I can ask helpdesk to provide proof of the email from HR arbitrarily and then confront the manager.

I know some Audit trails can be put and they would appear under Securty tab of Event manager ( or so I guess) but I need something more automated that would land in my mailbox.

Is this possible?
 

Read other answers
RELEVANCY SCORE 42.8

I work at a very small business with a newer credit card machine that is wired into a Netgear router with an Ethernet cable.

Credit card terminal runs thur no computer, it is hooked directly to the router.

I try to take care of all the IT concerns and problem when they come up.

The new PCI compliance rules that went into effect on Jan 31st 2018 are giving me real problems.

We have a static IP address which has not changed for about 4 years.
We always passed the PCI compliance scan done by a company called Trustwave.

For the pass 2 months we have failed the scans. The reason stated in the report is "Host not detected".

They (Trustwave) has told me that something in the router must be blocking the scan.

Basically they have been no help.

Does anyone know the solution to this problem?? I think that there must be thousands of small business with the same problem, as I tried to call Trustwave support but got only voice mail leave a call back number because of high call volume. I have been communicating with them only by email.

I am thinking that there must be a simple solution to this, but I have not found it yet.

If we passed the last 4 years and nothing on our end has changed then why can we not pass now.?

Makes no sense to me.

Anybody got any ideas ??? Should I call the bank that services the credit card machine ?

Thanks in advance for any help..................
 

Read other answers
RELEVANCY SCORE 42.8

Hi
What is a good PCI compliance security analyser primarily for Win 7 but also for later versions?
Thanks
Regards

Read other answers
RELEVANCY SCORE 42.8

Hi all - I'm having an error throughout many of the security and compliance pages in my instance - not getting too much help as yet so thought I'd post here. The errors I'm seeing are as follows:


error








The requested search root 'APCPR06A002.prod.outlook.com/ConfigurationUnits/XXXXXXXXXXXXXX.onmicrosoft.com/Configuration/Transport Settings/Rules/SafeAttachmentVersioned' is not within the scope
of this operation. Cannot perform searches outside the scope 'apcprd06.prod.outlook.com/Configuration/Services/Microsoft Exchange/ExchangeLabs'.








The requested search root 'APCPR06A002.prod.outlook.com/ConfigurationUnits/XXXXXXXXXXXX.onmicrosoft.com/Configuration/Transport Settings/Rules/AntiPhishVersioned' is not within the scope of this operation. Cannot
perform searches outside the scope 'apcprd06.prod.outlook.com/Configuration/Services/Microsoft Exchange/ExchangeLabs'.

The requested search root 'APCPR06A002.prod.outlook.com/ConfigurationUnits/XXXXXXXXX.onmicrosoft.com/Configuration/Transport Settings/Rules/SafeLinksVersioned'
is not within the scope of this operation. Cannot perform searches outside the scope 'apcprd06.prod.outlook.com/Configuration/Services/Microsoft Exchange/ExchangeLabs'.

Any thoughts?

Read other answers
RELEVANCY SCORE 42.4

Hello ,

I have a application exe from my work that will only run and install on a 32 bit OS. I would like to use it on my W7 64 bit OS. I have tried right clicking on properties and then going to compatibility tab...then running it in XP or Vista mode none of them worked. I still get this error... this version of this file is not capable of running on a 64 bit OS. Is there anything else I can try? The exe ran fine with XP and Vista 32 bit.

A:Running a 32 bit application exe with 64 bit OS

What application is it?

most programs that will run on x32 and x64 operating systems usually have both install packages on the exe if it doesn't then you either need to get the x64 version or you are going to have to have to install a x32 version of xp or vista on another partion of your computer so you can at least use it some how.

Read other 4 answers
RELEVANCY SCORE 42.4

Hi,

I have been trying to make my web pages 3WC / 4.01 compliant and viewable as much as possible across different browsers (albeit not perfectly)

I have been to http://AnyBrowser.Com and checked my pages in their site viewer. I have looked at the 3WC homepage and their markup Validation service at http://validator.w3.org/

Basically according to all the above, my pages look like crap and have heaps of errors.

I have located the online HTML Tidy service at:

http://cgi.w3.org/cgi-bin/tidy

I have used this HTML Tidy in combination with the Site Viewer at AnyBrowser.com and the Validator at 3WC.

After having reviewed and noted results of my existing pages in the Site Viewer and the Validator, I put my pages through the HTML Tidy, Copied the Page Source, pasted this into Dreamweaver and uploaded new pages.

I have put these new pages back through the Site Viewer and the Validator only to find that the pages are MUCH worse than they were before.

Even in the 3WC Validator the code entered by HTML Tidy is noted as errors (ex: Doc Type is replaced by Tidy code etc).

I can't understand why HTML Tidy would allow this to happen if it is indeed supposed to promote the 3WC compliance?

I am thinking that my only option at this point is to delete my HTML Tidy pages, go back to the originals and go through the errors listed in the 3WC Validator and manually fix them one by one...which (even with the error explanations handy) I am not sure that I can do properly (or indeed ... Read more

Read other answers
RELEVANCY SCORE 42.4

(i was wondering if anyone has a list of all the hipaa guidelines for computers/networks/systems?

i've been trying to find a comprehensive list but all i can find online are legal documents. i'm looking for a list that i can use as a checklist.

like passwords must be this length and workstations must lock after so many minutes.

any assistance is greatly appreciated.

thank you. = ])
 

A:(hipaa compliance cheat sheet?)

Read other 6 answers
RELEVANCY SCORE 42.4

Hi All,
Help!
I have a customer that is trying to jump through Trustwave's
questionnaire on PCI compliance (credit cards).  This is
their explanation of one of the required tests:  they
want both "vulnerability" and "penetration testing".  Now I don't
see the difference, but they do:
       Vulnerability scanning uses automated tools to attempt
       to discover vulnerabilities in the cardholder data
       environment.  Penetration testing goes further by
       having personnel *manually* attempt to exploit
       vulnerabilities and gaps in security the same way a
       criminal would.  Without penetration testing, you may
       know where vulnerabilities may be, but you won't know
       how deep an attacker can get or what he may be able to
       steal.
"Manually"?  How is the world does one do that?  Try to log in
with telnet?  Call the local federal prison and ask to borrow
a hacker for the day?  What can I do manually that the
"automated tools" can't?
Now I an see trying to seal the hole and retesting, but
that is not what they are asking for.  They want me
to sit down and try to breaking into the thing *the same
way a criminal would*!
AAAAAAAAAHHHHH... Read more

A:PCI compliance: vulnerability vs penetration testing

Since you are already receiving help here, please continue in that thread. Do not start new threads or duplicate topics as this causes confusion and makes it more difficult to get the help you need to resolve your issues. Further, it necessitates staff spending time with housecleaning to remove those duplicate postings...time which could have been provided to others needing assistance.Thanks for your cooperation.This thread is closed. If you have any questions, please PM me or another Moderator.

Read other 1 answers
RELEVANCY SCORE 42.4

Where can I read some quick tutorial on layer 2 and layer 3 connectivity, IOS images, ISO compliance?

Thanks!
 

A:Layer 2 and 3 connectivity, IOS images, and ISO compliance???

http://www.thecertificationhub.com/networkplus/the_osi_ref_model.htm
 

Read other 1 answers
RELEVANCY SCORE 42.4

I am having a issue playing Blu Ray disks. I continue to get a HDCP compliance error everytime I try to play a Blu Ray video.  I am using arcsoft TMT6 on windows 7. I checked to make sure my monitor and video card are both HDCP compliant, and they both are. I used to be able to watch Blu Ray movies, and I'm not sure what changed, or why I cant watch them now. Also, I used cyberlink BluRay advisor and it said my "software player was not found" and "video connection type is digital without HDCP". Those are the only two problems found. I have a HP 2310 series wide lcd display and have a ATI Radeon HD 5570 video card, and am using a HDMI cable to the monitor. Can someone please help me with this. 

A:HDCP Compliance Issue, Everything is Compliant Though???

Hi Eric,   The Cyberlink BD Advisor only look for a Cyberlink BD software player.  You might very well have a perfectly good BD HDCP certified software player and Cyberlink won't indicate that you have it.  Your non-Cyberlink BD player might need updating to play the new BD titles.  The other issue might be a loose or faulty HDMI cable, a bad video card, corrupted video driver or a monitor problem. Power off the PC and monitor. Check the cables for tightness.  Be sure that you monitor has only one video connection and that it is a HDMI cable. Now try a monitor reset by unplugging the monitor's power cord and then hold down the power button for 30 seconds.  If you still have issues then try reinstalling the video card driver or installing the latest AMD driver from the AMD web site.

Read other 2 answers
RELEVANCY SCORE 42

Log Name:      Application
Source:        Application Error
Date:          2018/1/19 16:18:41
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      XXXXXXXXXX
Description:
Faulting application name: War3.exe, version: 1.27.0.52240, time stamp: 0x56bd0de1
Faulting module name: AcLayers.DLL, version: 6.3.9600.16384, time stamp: 0x521582eb
Exception code: 0xc0000374
Fault offset: 0x00017861
Faulting process id: 0x1b5c
Faulting application start time: 0x01d3917347ee6f3e
Faulting application path: C:\Users\10148_000\Desktop\dzclient\warcraft iii frozen throne\War3.exe
Faulting module path: C:\Windows\AppPatch\AcLayers.DLL
Report Id: b3bc40eb-fd66-11e7-8258-90489a189882
Faulting package full name: 
Faulting package-relative application ID: 
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2018-01-19T22:18:41.000000000Z" />... Read more

Read other answers
RELEVANCY SCORE 42

Hello guys..

Ok, so the problem is when i'm running any app like Google Chrome, Windows Live Messenger, or any other, even sometimes when i open a windows folder (Explorer.exe), it freezes for a while (i'd say for 1 minute) and then *puff* continues running, and later happens again, and again.... Its been happening for like a week now, and before that i didn't have this problem ... So my guess is some freaking windows update, but i hope you can help me solve this issue.

Here are my DESKTOP specs:

OS: Windows 7 Ultimate (32 bit)
Processor: Intel(R) Core(TM) 2 Quad CPU Q8200 @ 2.3 GHz 2.3 GHz
RAM: 4.00 GB
Intel(R) G41 Express Chipset

Note that i recently bought this computer

I really hope you guys can help me out...
THANKS IN ADVANCE

Sorry for my english its not very strong.. Hope you can understand my problem
 

A:Win 7 freezes when an application is running... PLEASE HELP!

Read other 6 answers
RELEVANCY SCORE 42

Hi all,
yesterday i was performing some routing maintenance on my pc, and i noticed there was an evernt log showing an error of an application that was stored in the path. (Please note i didnt mistype VLC).
C:\Users\{myuser}\Appdata\roaming\LVC\lvc.exe
It was always giving me an error code 0x0000005. I am worried if this is some sort of virus.
when i checked with a windows defender and avg i got no virus. It was also using the visual basic command line script process when i checked task manager.
What else could i do to check out the problem?
Thanks

EDIT: I tried searching online, but i found no results

A:Unknown application running on my pc

Searching with Startpage shows one link to a fix for some virus and a couple of links to Garmin GPS software. Nothing else of substance.
Lycos found an article about an old Server 2000 bug and a Lee Van Clief screensaver.
I'd try every search engine you can think of until something makes sense.

Read other 2 answers