Over 1 million tech questions and answers.

New Hard disk recognized by Windows7 but not by BIOS, install failed

Q: New Hard disk recognized by Windows7 but not by BIOS, install failed

I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.

When I am trying to load windows into it I get the error

Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu

The Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)

I have a InsydeH2O Setup Utility
Inside the BIOS the options available to me are:-

**Main**
->System Time
->System Date
->Diagonistic Log

**Security**
->Administrator Password <clear>
->Power-On Password <clear>

**Diagonistics**
->Primary Hard Disk Self Test
->Memory Test

**System Configuration**
->language <English>
->Processor C6 states <Enabled>
->Fan always on <enabled>
->Boot Options->

**Exit**

**No other options other than this are available to me in the bios**
Note:- In the BIOS Reverting back to Defaults did not work. I have already tried that

Please could you help me repair my laptop.

RELEVANCY SCORE 200
Preferred Solution: New Hard disk recognized by Windows7 but not by BIOS, install failed

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: New Hard disk recognized by Windows7 but not by BIOS, install failed

8+ hrs and lots of viewers, but no answers...

giving it a bump here

Read other 1 answers
RELEVANCY SCORE 79.6

I have two hard disks, one Seagate 120 GB one and another Maxtor d540x-4d
5400 rpm 40 GB UATA/100 drive. My problem is that the maxtor drive used to
work fine, but recently, it is recognized by BIOS and Device Manager in
Windows, but it is not shown by either the logical disk manager in disk
management or My computer. What is the problem? Any remedies? THanking you
 

A:Hard Disk recognized by bios, but not by My computer/Disk Manager

You need to partition and format a drive to see it as a drive letter in Windows.
 

Read other 5 answers
RELEVANCY SCORE 78

I currently have 2 SATA hard disks connected, then 1IDE hard disk on blue IDE slot and 2 IDE cdroms on the other IDE slot. I also have two other external drives each connected to a USB port.

The problem is that the IDE hard disk is not being recognised in BIOS, when I try to switch some settings in the BIOS IDE configuration I have managed to get it recognised but then the cdroms are not recognised, how can I get them all recognised?

Another problem I have is with the external drives. If I switch them on before the computer boots up the POST will hang, so I have to leave them off until the POST ends and switch them on while windows loads so they get recognised by windows with all their sharing settings intact. Is there a way to eliminate this annoying problem?

Thanks
 

Read other answers
RELEVANCY SCORE 77.2

I have a brand new Foxconn A7GM-S 2.0 motherboad which seems to be unable to recognize my two SATA hard disks. I have ensured that the power connectors and SATA cables are snug, and have tried each pair of the six SATA slots on the motherboard. I also don't hear either hard disk powering up upon boot.

This board is a replacement for my older motherboard, which died rather suddenly. Both hard disks were connected to the old motherboard at the time of its failure, which leads me to wonder if the disks are damaged beyond repair. Do motherboard failures generally affect connected hard disks? Or is my new motherboard defective?

Specs:
CPU = AMD Athlon 64 X2 5050e
Motherboard = Foxconn A7GM-S 2.0 (BIOS version 8.00.14)
RAM = 2 x 2 GB GSkill DDR2-6400
HDD1 = Seagate Barracuda (160 GB)
HDD2 = Western Digital Caviar (80 GB)
 

A:SATA hard disk not recognized in BIOS

Read other 11 answers
RELEVANCY SCORE 77.2

Hi all,

I know this is similar to at least one recent thread, but different enough to post.
I am upgrading my sister's machine from a 3.2Gb WD Caviar to a 40Gb Seagate U Series 5 drive, ST348023 from memory, ATA100.
The machine is running a K62 266, not sure of the Mobo, but obviously supports the AMD chip.
From what I have been able to glean from the Seagate site, this drive should be backwards compatible with any IDE connector, but when I stick it in, with the BIOS set to auto-detect all drives, the machine halts trying to detect the Seagate drive, although it will let me Ctrl-Alt-Del and also press Del to get into CMOS setup.
I have tried it as Primary Master, and as Primary Slave, both with the other HD on the same cable, and without it in at all.
Seagate's disk tools are able to detect that it is there, even when not setup in the BIOS. Seagate's disk wizard, which is an excellent tool for installing a new drive, told me that all I had to do was set BIOS settings to auto for that drive, and all would be rosy. It looks at what drive you have, what BIOS you have, and gives you instructions to suit. The documentation tells me that if the BIOS supports LBA and Large disk types, then all should be fine - it does.

Can anyone give me any ideas on what's going on? I have installed quite a number of hard drives in the past, but never come across anything like this.

Rich
 

A:Hard Disk not being auto-recognized by BIOS

Read other 7 answers
RELEVANCY SCORE 77.2

Yesterday while watching movie on my PC it appeared as black on the screen and stopped working. After restarting the PC it was not responding as the BIOS was unable to recognize the hard disk. It creates an unusual sound while BIOS searches drives.

1. I tried by bootting the PC using another hard disk but this HD does not appear in the windows.
2. I also tried to boot using Ubuntu live CD but failed to find my HD on it.

As it is not recognized by BIOS, I cann't use data recovery software to recover the data. I'm badly in need of all data in it.

Please someone help me in this regard to recover the data.


Brand: SAMSUNG
Model: HD252HJ
Capacity : 250 GB
Interface : Serial ATA 3.0 Gbps
Buffer memory : 16MB
 

A:My Samsung Hard Disk is not being recognized by BIOS

Try the freezer trick. Place your hard drive in zip lock freezer bag to protect it from moisture and freeze it overnight (or a few hours at least). Quickly hook up the frozen hard drive and try to boot from it. If it works, be prepared to copy your important data as soon as possible before the hard drive warms up too much. This is not a permanent fix but it may work long enough to save your data.
 

Read other 3 answers
RELEVANCY SCORE 75.6

Recently I decided to upgrade my hard disk storage space so I bought a Maxtor DiamondMax Plus 9 160GB SATA hard disk drive. Upon installing the drive I entered the Bios and went into "Intergrated Peripherals" section and set the BIOS to recognize P-ATA + S-ATA drives. When I reboot the new Maxtor drive shows up in Windows Explorer and functions normally. Also in Windows Explorer, my CD/DVD drive appears. However when I put a cd in the drive and click on the drive in Explorer I get the message to "Insert a disc into drive F:". The drive will not read the disc. When I went into Device Manager the CD/DVD drive shows up and says that it is functioning properly. Strange.....
So, I rebooted and reset the BIOS to the setup defaults (ie. P-ATA Drive Only) and when the computer boots up now the CD/DVD drive functions normally but the Maxtor drive is now not recognized. I understandObviously the Maxtor drive is not recognized because the BIOS is set for P-ATA drive only, but why when the BIOS is set for P-ATA + S-ATA is the CD/DVD drive not recognized?

My computer specs are as follows:

Processsor: Intel Pentium4 3.2C GHz (478pin/FSB800)
Motherboard: MSI i865G ATX
Bios: AMI Bios
RAM: DDR SDRAM 1GB (512MB x 2 / PC3200)
Video:nVidia GeForce FX5700 128MB AGP
Sound: CREATIVE SoundBlaster Audigy2ZS Platinum Pro
Hard Disk1:160GB Ultra ATA HDD (7200rpm)
Hard Disk2:Maxtor DiamondMax Plus 9 160GB SATA
OS: Windows XP PRo
 

A:CD/DVD Drive not recognized in BIOS after installing SATA hard disk

No one going to take a stab at this one. Please, I need some help here. Any advice would be appreciated
 

Read other 5 answers
RELEVANCY SCORE 75.2

I have an HP Compaq dx2000mt desktop that has windows7 32bit enterprise installed on it. I tried to install windows7 home 32bit to replace the enterprise OS. As I was installing it stated the old OS would be marked, XXX.old and it went forward, then came to a point where there were booting errors. and it stopped installing. Now I am left with a half install, and a full OS the boot section now in its own drive named disk 0 system reserved.
I partioned the C drive and allocated 20gb and tried to install there. I received the same errors seems that my boot.ini is stuck in the system reserved and I cant figure out how to incorporate disk 0 over to disk C, so that my boot is in the same disk drive.
I have really messed this one up. I have installed an operating system before and never had so much trouble.
Any advice would be helpful.
And please if you have an answer, something for me to do, it needs to be A.B.C.'d out step by step as Im not an expert. But I guess I already proved that...
Thank you in advance.
Katz

A:Failed install windows7 home to windows7 enterprise

Clean Install Windows 7

Read other 9 answers
RELEVANCY SCORE 73.6

After Bios update failed my hard disk looks like below Is it possible to combine 8 mb unallocated,980 mb and HP_tools to combine with C?

Read other answers
RELEVANCY SCORE 70

Ok, my wife's hard drive is toast. Can't read at all. I even removed it, put it in an external enclosure with USB connection and tried to read it on my computer, nada. Tried Spinrite on it. Nada. So, it's gone, and I can't recover anything.

I'm buying a new HD. The OEM version of Windows 7 was pre-installed by HP on the laptop. So I have no disks. I do have the 3 Recovery Disks my wife created when we bought the machine. But when I was trying to revive the harddrive one of the recovery screens said Windows 7 had to be already installed on the hard drive for that to work.

So, is there anyway for me to get Windows 7 on the new HD short of buying a new copy? The laptop does have a sticker on it with a product key.

Steve

A:Hard Drive has failed! Install Windows 7 on new HD from Recovery disk

spthomas,
HP and Compaq Desktop PCs: Looking for Recovery Discs? - HP Customer Care (United States - English)

HP Compaq dc7700 Convertible Minitower PC*-* HP Support document - HP Business Support Center

Read other 2 answers
RELEVANCY SCORE 68.4

Hello,

I have problems with updating the BIOS of my Tecra R10J. The current version is 1.4, and I want to update it to 3.0, so i have downloaded from Toshiba web site the correct file named "P006Cv300.exe" released from 11/04/2009. This is a BIOS update ONLINE into a real session of Windows 7. Simply, right click the compress exe, click run as admin and that's all but ......... for me it said :
*"[Error] The starting of service was aborted. User does not have administrator privileges"*

see below :
http://perso.orange.fr/100mo/bioserror.jpg

I've tried it with :
- closed AV, Firewall, etc ...
- disable UAC
- Run as administrator
- Tried with an another admin account
- Safe mode (bios update does not support safe mode)
- direct local administrator session

No change. Still the message "User does not have administrator privileges".
Need help please, found nothing on Google (similar Bios problem but not solved !!!!!)

Thank you

A:Update BIOS Failed on Tecra R10 with Windows7

Did you install Win7 yourself?

I believe you need to install the Toshiba Value Added Package, so the BIOS file can read the system details properly.


ps. Did you install 32bit or 64bit?

Read other 8 answers
RELEVANCY SCORE 67.6

I tried replacing the hard drive on my Inspiron 9300 with a 200G drive.  The administrative computer tools in Windows XP recognized it, but the BIOS showed it as 130G or so.  I finally had to replace the drive with a smaller one.  I had the latest BIOS version.  Is there a BIOS fix that will allow the larger hard drive to be used?

A:Hard drive not recognized by BIOS but recognized by WINDOWS Inspiron 9300

Not on the 9300s that use EIDE (parallel ATA) drives, no - the limit is 137G in BIOS setup.
 

Read other 3 answers
RELEVANCY SCORE 67.2

I just rebuilt an old system using Windows 7 Home Premium after using WinXP pro for many years. The primary hard drive is WDC 150 Mg and Win7 is installed and updated to current with SP1. I dropped a second WDC hard drive in, formatted and was going to use it for a 2nd backup unit. Both of these are sata. Both hard drives are recognized by Disk Management but when I select Computer on the start menu ONLY the primary 150 Mg drive is recognized. If I plug in an external drive, both Computer and Disk Management recognizes the external drive. How do I have Win7 recognize my backup WDC drive so I can use it.

Thank you

A:hard drive NOT recognized in computer but IS recognized in disk mgmnt.

  
Quote: Originally Posted by PERSIL


I just rebuilt an old system using Windows 7 Home Premium after using WinXP pro for many years. The primary hard drive is WDC 150 Mg and Win7 is installed and updated to current with SP1. I dropped a second WDC hard drive in, formatted and was going to use it for a 2nd backup unit. Both of these are sata. Both hard drives are recognized by Disk Management but when I select Computer on the start menu ONLY the primary 150 Mg drive is recognized. If I plug in an external drive, both Computer and Disk Management recognizes the external drive. How do I have Win7 recognize my backup WDC drive so I can use it.

Thank you


Had similarities on my pc.

Goto BIOS, there you have 4 options.

Primary Master
Secondary Master

Primary Slave
Secondary Slave

Set it as follows:

Primary Master -----> Main Boot HDD
Secondary Master -----> EMPTY

Primary Slave -----> CD/DVD RAM
Secondary Slave -----> Secondary backup HDD
Hpe it helps!

Gala

Read other 2 answers
RELEVANCY SCORE 65.2
A:Hard Disk Test Failed Hard Disk 1roduct QE24UA#ABA ID: GG8KH...

The hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail  SATA hard drive can be used. I believe this model uses a laptop/mobile hdd.Just be sure to get one of at least equal capacity as the original in order to use Recovery Media to install Windows. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.

Read other 3 answers
RELEVANCY SCORE 65.2

Hard disk type : Seagate SATA.
Model Number : ST3160215AS
Serial Number : 6RA1J7H0
Firmware Revision : 3.AAD

OS : XP SP3
Mother Borad : Intel 945 GCCR

My hard disk has passed Short DST and failed Long DST of SeaTools, do the hard disk going to fail? If yes, how to transfer my data to a new hard disk easily?

Complete description of the issue :

1.I have experienced boot up issue with my PC 2 days back. My PC not even boot into safe mode also.I got the following blue screen errors on successive restart of PC .

A. 0x00000050 ( 0xC374037F, 0x00000000, 0x804FBA19, 0X00000000 )
B. STOP : C0000135 ( Unable to locate component )
c. 0x0000007E ( 0XC0000006, 0X80698C12, 0XF79896E4, 0XF79893E0 )

2. I have removed and replaced the hard disk ( several times ). I can boot into windows now and can work normally, But,one of the above Blue sreen errors is coming all of sudden while working on PC. It is happening independent of the application I am using.

3. And the following messages are coming at the XP welcome screen and while working on the PC.

A.C:\windows\system32\drivers\etc\netloc.wlt has corrupted and unreadable. Perform CKDSK.
B.C:\windows\system32\drivers\etc\APPFCONT.DAT has corrupted and unreadable. Perform CKDSK.
C.C:\windows\system32\drivers\etc\idsflt.cfg.bck has corrupted and unreadable. Perform CKDSK.
D.Cagefile.sys has corrupted and unreadable. Perform CKDSK.

4.I have performed CHKDSK on all local drives exept local drive C. CHKDSK giving a message that " can no... Read more

A:My hard disk has passed Short DST and failed Long DST of SeaTools, do the hard disk g

In a Run box, enter "chkdsk /r"
You'll be asked if you want to run chkdsk at the next reboot. Enter "Y".
Reboot, and be prepared to wait, as it may take a long time.
 

Read other 2 answers
RELEVANCY SCORE 64.8

1. New SSD (Crucial MX300 1TB SATA III 2.5") passes hardware diagnostics UEFI tests, but isn't recognizedr in BIOS (MAIN) 2. Original 2.5" 750GB HDD (Toshiba MQ01ABD075) replaced based on Bootup Error Msg: Unmountable Boot Volume & failed DST checks 3. Bootable 16GB USB Drive with replacement Windows 10 OS (software downloaded from MS website) also not recognized in BIOS (MAIN) when plugged into any of 3 USB ports. Question: Is there some sort of BIOS RESET needed after an HDD failure (e.g. to Default settings) before it can respond properly or is there something else I'm missing? Please advise. 

Read other answers
RELEVANCY SCORE 64.8

HI all, since replacing my  HD, windows 7 worked perfectly for about 3 months then suddenly  flagged that windows is not genuine, also i am unable to install windows7 SP1, all details below and thanks
in advance for any  help




I am unable to install windows 7 SP1, i have downloaded it numerous times but it  always fails to install
Windows 7 Service Pack 1 (KB976932)
Installation date: ?2019/?07/?01 03:10 PM
Installation status: Failed
Error details: Code 80070017


Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-76HMH-M4RKY-V4HX6
Windows Product Key Hash: CegQyzk5Zd0qxFdtmueCy9UmviY=
Windows Product ID: 00371-OEM-8992671-00013
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.048
ID: {71B94676-A10A-433B-9FA8-73226A24FB25}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7600.win7_gdr.110408-1633
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaT... Read more

Read other answers
RELEVANCY SCORE 64.8

I had previously had a issue with a virus/Trojan, I downloaded multiple aintvirus/malware removel
Tools, to no avail. So I decided to do a full recovery, apon the recovery completion my system starts to reinstall windows. At that point after registry install the system gives error message that windows is unable to install to "thuis systems hardware" I have tried everything I know and was suggested via tech support.. Any ideas(besides buying a recovery CD or new OS) please help ASAP. Have college work due end of week.

And now its saying hardisk failure and bios is not recognizing my HDD..

A:Windows Failed Install after (Windows7) system recovery.

if bios is not recognising hdd it could either be a problem with drivers or your hdd is "fried"

Read other 2 answers
RELEVANCY SCORE 63.2

So this really irritates me because I just spent hundreds of dollars sending my laptop to HP last year because the hard drive completely failed. I have a 1TB hybrid hard drive and 22Gb solid state used for caching.  When I booted up my computer Intel Rapid Storage Technology said there was an issue.  When I opened it, it says that the status of: SATA disk (932 GB)(System) Accelerated, is Failed.  My SATA_Array_0001 22GB is fine though.  So I ran a System Quick Test,everything passed except Hard Drive Short DST Check: FAILEDFAILURE ID: Q4MP7Q-6RA82U-MFGJWK-60W303 This is weird because other than the computer telling me there is something wrong every time I restart it, It seems to run just fine.  Im just worried because I don't want it to randomly die on me one day.  

A:SATA disk failed and Hard Drive Short DST Check: Failed

Hi there @nmulji,  Thank you for joining in on the HP Support Forums and Welcome! This is a great place to ask questions, find solutions and get help from others in the community! I read your post on the HP Support Forums and understand that the Hard Drive in your HP ENVY TouchSmart 15t-j100 Select Edition CTO Notebook PC failed the Short DST Check.  SMART (Self-Monitoring Analysis and Reporting Technology System) uses a technology known as predictive failure analysis to tell you when a hard drive failure is imminent. Have you tried to Restore the BIOS? If not, please try this step first. Then, just to be on the safe side, back up your data that way it does not get lost. However, there might be certain conditions that cause a hard drive failure message to display when a problem does not exist (a false positive). To fix false positive hard drive errors, please try updating the hard drive firmware. You can check whether an update is available by going to the  Get software and drivers page. You will need to put in your Model Number and then click the links that pertain to the computer configuration and see if a hard drive update is available.  You could also try to do a  Disk Defragment to consolidate files and move them to another section of the drive where errors are less likely to occur. Did this reply resolve your issue or answer your question? If... Read more

Read other 1 answers
RELEVANCY SCORE 62.8

i have windows 7-64bit and mac on my laptop and i think i'm infected with $RECYCLE.BIN trojan !! i don't know how to remove this trojan from my laptop and hard disk! even antivirus didn't detect it , i searched alot for solution but i didn't get any answer ! :| i'm afraid of losing data!
 
i did as u mentioned in ur site! i hope u can help me!
 
 
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 10.0.9200.16521  BrowserJavaVersion: 10.21.2
Run by Sana at 16:33:23 on 2013-06-22
Microsoft Windows 7 Ultimate   6.1.7601.1.1252.1.1033.18.8103.5290 [GMT 4.5:30]
.
AV: avast! Internet Security *Disabled/Outdated* {2B2D1395-420B-D5C9-657E-930FE358FC3C}
SP: avast! Internet Security *Disabled/Outdated* {904CF271-6431-DA47-5FCE-A87D98DFB681}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: avast! Internet Security *Disabled* {131692B0-0864-D491-4E21-3A3A1D8BBB47}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\SYSTEM32\WISPTIS.EXE
C:\Windows\system32\WUDFHost.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\WLANExt.exe
C:\Program Files\AVA... Read more

A:$RECYCLE.BIN trojan in windows7 and hard disk

Hello, Welcome to BleepingComputer.
I'm nasdaq and will be helping you.

If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.
===

--RogueKiller--
Download & SAVE to your Desktop RogueKiller for 32bit or Roguekiller for 64bit Quit all programs that you may have started.Please disconnect any USB or external drives from the computer before you run this scan!For Vista or Windows 7, right-click and select "Run as Administrator to start"For Windows XP, double-click to start.Wait until Prescan has finished ...Then Click on "Scan" buttonWait until the Status box shows "Scan Finished"click on "delete"Wait until the Status box shows "Deleting Finished"Click on "Report" and copy/paste the content of the Notepad into your next reply.The log should be found in RKreport[1].txt on your DesktopExit/Close RogueKiller+
===

Search and delete the AdWare, PUP (Potentially Unwanted Program) installed on your computer.

Please download AdwCleaner by Xplode onto your Desktop.
Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click on Delete tab follow the prompts.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Rn].txt (n is a number).
===

Please download
Junkware Removal Tool to your Desktop.
Please close your security software t... Read more

Read other 17 answers
RELEVANCY SCORE 62.8

Had a Hard Drive booting error 3f0 after installing (unsuccesfully) Windows 7 Ultimate x64 after Ubuntu 16.10 LTS. Cannot access OS, or GRUB (Boot Manager). Can boot OS via Boot from EFI feature.

A:Hard Disk error 3f0 after installing Windows7

Which OS can you boot? Linux? Sounds like the hard drive needs to be replaced. Can you get into F2 diagnostics as you boot up to run the hard drive check?

Read other 1 answers
RELEVANCY SCORE 62.4

I bought a notebook in 2010. I upgraded to Windows 7 Pro right after purchase.

I created a Windows 7 repair disk April 2011.

My hard disk crashed this month and will be replaced and loaded (by manufacturer) to the image as of the purchase in 2010.

When I get the PC, will it help me to use the repair disk?
In my dreams, I'd want to restore Windows and maybe settings and drivers at least to the time the repair disk was created.

Any thoughts? Thanks in advance,

Tom

A:can I use Windows7 repair disk if hard drive is replaced?

  
Quote: Originally Posted by thomas1004


I bought a notebook in 2010. I upgraded to Windows 7 Pro right after purchase.

I created a Windows 7 repair disk April 2011.

My hard disk crashed this month and will be replaced and loaded (by manufacturer) to the image as of the purchase in 2010.

When I get the PC, will it help me to use the repair disk?
In my dreams, I'd want to restore Windows and maybe settings and drivers at least to the time the repair disk was created.

Any thoughts? Thanks in advance,

Tom


When you get the PC, it will have Windows on it just like when it was new. Using your Repair Disk would not put your settings or anything else that you had put on there. It is only for, well Repair. You will have to install all of your programs again.

Read other 3 answers
RELEVANCY SCORE 61.6

So after reinstalling my windows on a SSD, i cannot see my other HDD drive that I haven't even touched, It only shows up in device management in the disk drives, not in the disk management. It also shows up as dynamic. Tried using Partition wizard, but it shows that the disk is bad, so i tried converting it from dynamic to basic, but it fails to do so. I have files on it that I cannot lose, any suggestions?

EDIT: Fixed by itself, it now appears in the disk management.

A:HDD gets recognized by BIOS but I can't see it at Disk Management.

  
Quote: Originally Posted by aiceo


So after reinstalling my windows on a SSD, i cannot see my other HDD drive that I haven't even touched, It only shows up in device management in the disk drives, not in the disk management. It also shows up as dynamic. Tried using Partition wizard, but it shows that the disk is bad, so i tried converting it from dynamic to basic, but it fails to do so. I have files on it that I cannot lose, any suggestions?

EDIT: Fixed by itself, it now appears in the disk management.







Quote:
I have files on it that I cannot lose, any suggestions?


You can use Macrium ( free) to create the image.

http://www.majorgeeks.com/content/pa...2270j1060538j7
Be careful when downloading to always click "custom" and decline any of the crap it wants to add - i.e. changing search engines, home page, etc.

Make a boot cd( instructions on main page) and also after creating the image, do a Verify.

I do this by clicking Restore and browsing for the created image and you will see a link to Verify.

Put the image on a different internal hdd and if you have an external hdd, put one there as well.

Do an image backup periodically, (I do it once a week or after any major changes).

This will prevent loss of your files if you have a virus,corruption, etc.

Read other 3 answers
RELEVANCY SCORE 61.6

The problem is pretty much sum'd up in the title. I have a 1TB Western Digital Blue Caviar sata HDD hooked up to the motherboard. A while back, when I went to go boot up the PC, the HDD busy light just stayed solid, and windows 7 took a lot longer than usual to load. When it does, I can't use the hard drive. I have tried to rescan for it in disk management and exhausted all most all the fixes I can find in threads on the net.

I know it's not a totally dead disk, because a couple times the C: drive (boot drive) automatically ran CHKDSK, it seemed to repair 1 or 2 small files, a file structure, or something, and then the D drive would return for a couple days before the problem returned.

I replaced the Sata cable with a new one, it started working again, but only for a few days. I'm kind of baffled on this one. Usually I figure these things out. Any help would be greatly appreciated. Have a good day.
AMD FX(tm)-8320 Eight-Core - Gigabyte Technology Co., Ltd. 970A-DS3P - AMD Radeon R9 200 Series -
Microsoft Windows 7 Ultimate 64-bit

A:2nd HDD (1TB) is recognized in bios, not in Win 7 disk management

Are C and D both partitions on this single WD Blue?

Or do you have 2 distinct drives?

Not sure what you've tried, but have you run any Western Digital drive diagnostic utilities?

Have you connected the problem drive to several different motherboard ports?

Please tell us about your "Pennsylvania" operating system.

Read other 9 answers
RELEVANCY SCORE 60.8

Ok, so I've been using win7 for the past few years and out of the blue, it gives me a message: Microsoft Windows is not responding. So i hard-reset my computer and now windows won't load. I have the installation disc, but the disc won't install windows
on my hard drive... even after I formatted it. I also got some error message that said something about MBT or MGT or something like that, if needed, I can write it down. I'm currently using a linux usb to use my PC temporarily until I fix this.

Read other answers
RELEVANCY SCORE 60.8

Hi All,

I have an issue with the internal SATA HDD in my Pavilion dm4t laptop (PR #: XQ131AAR). The drive is working, when connecting via external USB enclosure is recognized by the PC, can read/write data, format partitions etc? When plugged in as internal HDD of the laptop, BIOS does not recognize it. When booting from Windows Installation Disk, the drive (and its partitions) are recognized, but I get the following message when trying to select a partition to proceed with Windows install:

Windows cannot be installed to this disk. This computer?s hardware may not support booting to this disk. Ensure that the disk?s controller is enabled in the computer?s BIOS menu.

Used external USB enclosure again, connected to a working PC and using TestDisk, I deleted the partition table (by zero writing it several times), then created a new MBR. When connecting back as internal drive, it is now recognized by BIOS and in the Windows installation screen, I can actually select a partition on the drive to install Windows on; the installation actually runs, but as soon as I get to the point of having to restart the PC during the installation process, upon restart the drive is not recognized anymore?

When I remove it, and repeat the same steps with TestDisk, it once again works, can start Windows installation, but it fails upon restart.

I have already read numerous forums on the topic, have tried various drive utilities. I also saw in one of the forums a suggestion to enable AHC... Read more

A:Windows cannot be installed to this disk... HDD not recognized in BIOS

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install:

Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. I would use a fresh ISO written with tool in Step 2 as yours is in question.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which overcomes certain install failu... Read more

Read other 1 answers
RELEVANCY SCORE 60.8

BIOS does not recognize the FDD. Have tried 4 different drives and different cables, no go. Could the mainboard be the culprit?

Any words of wisdom?

Appreciate your help.

 

A:Floppy Disk Drive not recognized in BIOS?

This one takes the cake. Was waiting for it to auto-detect!!! Christmas is also coming.

The old brain is fried, been looking at this thing too long.

 

Read other 2 answers
RELEVANCY SCORE 60

Hello all,

After reading a lot of stuff and attempting fixes on my own (on three computers), I'm looking for help.

My external HDD Spire circa 2006 will not show up in Explorer; here's what I've done so far:

opened disk mgmt to partition it...not showing up in disk management
opened device mgmt ....shows up
disabled and re-enabled...no luck
uninstalled and reinstalled....no luck
updated driver .... "latest driver updated"

changed ports
changed computers (older version of windows)
restarted computers

on the third computer it shows as "working properly", but still does not show up in explorer. So...

opened CMD prompt
disk utility
list volume .... not showing up in list volume (as far as I can tell)

Does anyone have ideas? I'm not sure how I can fix any potential partition problems if it doesn't show up in disk management. I'm not sure if it's "working properly" why it won't show up in explorer.

I appreciate your help.

Elizabeth
 

A:External HDD recognized in device mgmt not disk nor BIOS ...

Part of it has likely failed, hard drives fail all the time and externals fail even more often.

First try another USB cable. If that doesn't work take the unit apart and remove the actual hard drive. You can install the drive into another enclosure to see if it's the enclosure has failed. You could also install it internally in a desktop PC and see if it works instead of another enclosure. Being that old it might be either a newer SATA interface or it could be the older PATA interface with pins; if PATA you'll need an older computer to connect it to as new computers don't have PATA connectors anymore. I wouldn't buy another enclosure for it if there is not important data on it that you must recover, being that old it's simply not worth it to just get the drive working.
 

Read other 1 answers
RELEVANCY SCORE 60

Hi All
I have a pentium3 500mhz pc, that had win98 on a 20gb hard drive (64mb ram). I added another hard drive (xp) as the 98 was not booting.. I was able to boot from the xp disk (8gb) and retrieve the data from the 98 disk.
I then removed the modem...added a network card...and another 128mb ram...My problem now is neither of the hard drives are working!!! only the cd rom drive is detected...I have changed the jumper settings...removed the memory and network card....even tried booting with no cd rom..only h/disk (checked bios settings)...and still nothing

If anyone can shed any light on this problem...or let me know if there is anything else i can try....i would be really grateful!!
thanks
Gerry
 

A:hard disk no recognized

ukgerry said:

Hi All
I have a pentium3 500mhz pc, that had win98 on a 20gb hard drive (64mb ram). I added another hard drive (xp) as the 98 was not booting.. I was able to boot from the xp disk (8gb) and retrieve the data from the 98 disk.
I then removed the modem...added a network card...and another 128mb ram...My problem now is neither of the hard drives are working!!! only the cd rom drive is detected...I have changed the jumper settings...removed the memory and network card....even tried booting with no cd rom..only h/disk (checked bios settings)...and still nothing

If anyone can shed any light on this problem...or let me know if there is anything else i can try....i would be really grateful!!
thanks
GerryClick to expand...

At a guess, if you've checked all the jumpers etc etc, IMo it might be the second stick of ram, try removing it and see what happens

HTH
 

Read other 3 answers
RELEVANCY SCORE 60

i accidentally wiped my hard drive and recovery partion on an HP Pavillion G6 laptop running a 500 Gig seagate hard drive and now it will not recognize the drive.i can not format it or do anything please help.

A:Hard disk not recognized

Try checking your hard drive connection power and IDA or SATA.

Shut down your computer, Take the cover off now find your hard drive and check to see if the power,IDE,or SATA connection are good and snug.

If the problem still exists then repair MBR
Repairing the Master Boot Record
If you want to restore the master boot record, you can simply type in the following command in CMD:

bootrec /fixmbr

You can also write a new boot sector onto the system partition with this command (which is often more useful):

bootrec /fixboot

And of course, if you just use bootrec /? you?ll be able to see all the options.

Read other 7 answers
RELEVANCY SCORE 60

I replaced the sound card in my HP Vectra VL series 8. The computer will not now recognize the single internal hard drive. I replaced the original card and it still says that there is no hard drive. I have checked all the cables and reseated the card. I used the Windows 98 start-up disk and it writes to the virtual disk, but still says there is no hard drive. In Setup it says, "None" following the "IDE Primary Master Device" heading.

Any help would be appreciated.

Don
 

Read other answers
RELEVANCY SCORE 60

I have a hard disk that I want to clone my C drive to, and I connected it via USB external; it showed up fine, I formatted it. However, since XP doesn't recognize boot drives through USB I wanted to attach it internally before I cloned my system drive over for when I do a boot test.

However, the drive that showed up just fine through USB isn't showing up when I plug it into the MB. It is recognized and is powering up, because when the system posts, the initial screen shows it is connected, and it gets warm after a few minutes, so it's working and the system can detect it, it is just not showing up in Windows.

I checked, and it's set to Slave.

What's the problem?
 

A:Hard disk not recognized?

When you say windows doesn't see it, do you just mean it does not show up in My Computer or does it not show up in Disk Management either?

If it is just My Computer that you have checked, this could be because it is not formatted, or not formatted properly, or has no Drive Letter assigned to it.

To check Disk Management, go to Start > right click my computer > Manage. In the left hand side go to Disk Management. See if the hard drive shows up in there.

If it is there, but has no drive letter, right click it and assign one, or just do another quick format since it has already been formatted.
 

Read other 1 answers
RELEVANCY SCORE 60

I got a virus, had to reinstall OS. Turn everything back on and one of my drives doesn't show up. I find it in disk management but it's only a 1tera and it's showing up as 80gb unallocated, 23gb unallocated, 811gb healthy (primary Partition) but that one has no file system listed, nor does it give me any other options than properties and help. A second primary 260 gb healthy primary partition that is the same as the former, then another 16gb unallocated. It's only a 1 tera drive so something is wrong here. I suck at backup and have some important stuff on there. Anybody know what I am looking at here? Thank you.
 

A:Hard disk not recognized

Read other 6 answers
RELEVANCY SCORE 59.6

Can i install windows7 on an old hard drive with alot of data and no previous operating system, without deleting or harming that data (many folders of office files, music, pics and so forth)?

A:how do i install windows7 on an old hard drive with alot of data?

  
Quote: Originally Posted by irons


Can i install windows7 on an old hard drive with alot of data and no previous operating system, without deleting or harming that data (many folders of office files, music, pics and so forth)?


You can't install Windows on the same partition as the data without wiping out the data.

But you could do this:

Shrink the partition containing the data if it isn't full.

That would create "unallocated space".

Then make a new partition from that unallocated space.

Then install Windows to the new partition.

Whether it's practical in your case depends on full the drive is. If it's a 500 GB partition, with only 10 GB free, you couldn't shrink it enough to hold Windows.

But if it's a 500 GB partition with only 200 being used, you could shrink by 300, make a 300 GB new partition, and install to it.

But-----fiddling with partitions has some risk to the data. You are best advised to back the data up to some other drive first.

Best tool for the job is probably Partition Wizard.

Read other 4 answers
RELEVANCY SCORE 59.6

I have a hard disk that I want to clone my C drive to, and I connected it via USB external; it showed up fine, I formatted it. However, since XP doesn't recognize boot drives through USB I wanted to attach it internally before I cloned my system drive over for when I do a boot test.

However, the drive that showed up just fine through USB isn't showing up when I plug it into the MB. It is recognized and is powering up, because when the system posts, the initial screen shows it is connected, and it gets warm after a few minutes, so it's working and the system can detect it, it is just not showing up in Windows.

I checked, and it's set to Slave.

What's the problem?
 

A:Solved: Hard disk not recognized?

Read other 7 answers
RELEVANCY SCORE 59.6

Hi guys,
I will try to explain this.First i have Asus laptop N75sf and it comes with two hard disks Seagate ST 9500423AS each 500 gb.The one i use for storing documents movies etc. it is not recognized.But i can use the laptop because the other one is good and there is my windows installed.When i turn on my laptop the hard disk makes some noise more than usual but after a while it stops.Sometimes my laptop freezes completly and i cant move my mouse nothing.So what are your suggestions ? Did the hard disk stoped working ?or something else is the problem? My laptop is only 4 months old and it hadnt got any crashes like fell on ground or something like that, that can damage the HD.
Thanks in advance

A:hard disk not recognized on laptop

It could be one of your hard drives is failing and that is the noise you are hearing. It's only 4 months old so if it was mine I would take it to the place I bought it from.

Read other 2 answers
RELEVANCY SCORE 59.6

Hello,
I brought a new 1 TB seagate free-agent external hard drive. I connected it to my laptop which runs windows VISTA.
when i connected it for the first time, there was no problem in my laptop recognizing it or its ( wotever installation if you call it so ). so I transfered all my data as a back from my laptop ( aprx abt 100gb) to the new hard drive, and even double checked it on the new hard drive and everything was fine. later i disconnected the hard drive via the SAFELY remobe hardware. Later after abt half an hour I tried connecting back the hard drive to my same laptop, but it would not just show up. i tried everything liek trying to restart my system, connecting and disconnecting my external hard drive, changing the connecting USB cable, tried on different systems ( vista, XP) but the it would just not work( but the light on the hard drive does glow up). I ve noticed that for teh first few mintues( say 5-10 mins) there is some kind of slight sound from the hard drive Now all the data is on this hard drive and i am lost. I cannot affrord a data recovery options as its very expensive.
so i was just praying and hoping that someone could please help me out of this mess. Can someone out there please help me .
Regards.
Ravi.
 

A:My external hard disk would not be recognized

My external is not always recognized. What I do and it seems to work is to power it up for a min. or two before plugging it into a usb port.
 

Read other 2 answers
RELEVANCY SCORE 59.6

Hello everyone. As of last night my HP dv6000 with Windows 7 won't start. At boot, it gives the message:

PXE-E61: media test failure, check cable
PXE-M0F: Exiting Intel Boot Agent

I researched this problem and found that this message appears when there is no apparent source for booting an OS. This is commonly either because the hard drive isn't connected properly, or the boot order is disorganized in the BIOS, but neither are the case here.

When I run a boot disk, my hard drive is recognized and passes every integrity test. However, the Windows 7 install disk does not show any storage locations (neither my internal hard drive or any external ones I have connected to test) - except, for some reason, when I choose to browse for a driver for hardware, and then my internal hard drive (and external devices I plug in) appear intact and fully navigable. Again, that's only in the submenu of browsing for drivers that is an option after the Windows installation process fails to recognize any storage media.

Any ideas why my computer doesn't notice the hard drive when booting, but seems to in every other scenario I can test?
 

A:Hard Disk Not Recognized at Boot

Read other 16 answers
RELEVANCY SCORE 59.6

HI. i am new here and this is my first message here. can anybody please help me?

my computer problem started when i turned it on and it said that due to some blah blahs that windows didn't started successfully. i was made to chose with safe mode, last known good condition (sort of) along with other things. first i picked safe mode and it just hanged. then i rebooted and choosed last known good con.. all it does was hang.

i borrowed my friends good hd and after setting my friend's hd to master and mine to slave, i accessed my files nad saw that nothing was wrong. i even scanned my hd for viruses and found none.

then i connected my cd drive to my computer (i have only one ide cable) and removed my hd. but my cd cant be recognized. then i returned my hd, make it master, added my cd drive, made it slave. nothing happens.

i returned my friend's hd set to master, mine to slave again. formatted my hd (formerly win xp, fat32) to ntfs. then i ghosted my friend's hd to my hd.
then i used my hd without cd drive.. i mean alone, and it booted up.

my problem is even if i connected my cd drive as slave, the cd drive is turned on and even can take in cd and eject it. but it cannot read any cd, saying there are no cd in it when i insert one.

after that frustating 9pm to 5 in the morning battle with my pc, i turned it off. it snoozed and then when i opened it again, same prob. after rebooting, the ram check is through, i get a message that i there are no... Read more

A:hard disk and cd drive not recognized

Try resetting bios buy using the jummpers or removing the battery (cmos battery) on the board that looks like quarter.

It always works for me


Best of Luck...
 

Read other 4 answers
RELEVANCY SCORE 59.6

I just recently bought a Samsung 3.5 500GB HD (HD502IJ) and I've already detected it using on my mobo Bios as a slave and is connected via SATA. I have another 160 HD installed via SATA and that is also being detected. My OS is WinXP SP2 and it is installed on a 160gb via IDE.

When I installed the 500GB HD I cannot see it under Disk Management nor under my computer but it appears on the task bar where it says I can safely remove the hardware, kinda like being recognized as a flash drive or something.

How can I make my computer recognize the new HDD.

Thanks,

A:Hard Disk not being recognized in My computer

Format it, create at least one partition.Disk Management In Windows XP - http://support.microsoft.com/kb/309000/ \Disk Management - http://www.theeldergeek.com/disk_management.htm Louis

Read other 3 answers
RELEVANCY SCORE 59.6

hi guys,

I have been using this WD external hard disc from last one year. all of a sudden its not getting recognised in my computer. below are some details...

- I am using windows XP.
- tried restarting the laptop, no luck.
- change the USB cable that woks with another external HD.
- It is identified at the USB icon on the desktop as USB Mass storage device, but my computer will not recognise.
- In th disc management its not getting recognised.
- my laptop is recognising different hard disc drive and able to see the contents in it.
 

A:My external hard disk is not getting recognized

It's possible that the disk has gone bad or the controller inside the external enclosure has gone bad. One option would be to remove the drive from the external case and either install it in the PC or put it into another external enclosure and see if it works.
 

Read other 1 answers
RELEVANCY SCORE 59.6

Hello, can anyone help me with these:

I have bought new Verbatim Store N Go external hard drive (500 GB) for my HP laptop, which only supports USB 2.0.

Windows XP PS3 cannot recognize the device, once connected with 2.0 USB. If I try to connect it at friends laptop, it works instantly in 3.0 hub but also doesnt work with the 2.0 hub on the same computer, which runs Vista (it says USB device is not recognized)

I have followed the recomendations about disabling infcache.1 in c:\windows\inf\, still no success.

Thanks for any useful advice.
 

Read other answers
RELEVANCY SCORE 59.6

Sorry to join the group and start with a problem!

It all started a few weeks ago, my computer started to have problem to boot I used to receive a message "K BOOT FAILURE INSERT DISK AND PRESS ENTER", I had to turn the computer off and on and once every 20 or 30 attempts I was lucky to start Windows XP. I contacted HP and they asked me to disconnect the HD and reconnect it, did not work.
HP suggested to try recovering Windows XP, but didn't work either.

I assumed the problem was the hard drive, so I bought a new Seagate 200 GB and intalled it as master and the old as a slave, to do that I had the problem of booting it, I discovered that pressing F8 (safe mode) my computer started correctly.

So installed the new disk, re-installed Windows XP, installed SP2 yesterday and today I have the same problem, but the message is different "DISK BOOT FAILURE, INSERT DISK AND PRESS ENTER". I have not been able to boot even with F8.

While enetring BIOS it does not recognize the HD's, and yesteday while installing Windows XP it recognized both perferctly!

Can somebody help me??????
 

A:Hard Disk Drives not recognized

go back to bios
make sure you have the boot order correct
remove the old drive make sure new one is ide channel 1 or sata channel 1
boot again if it boots yer ok
add the old drive boot again
depending on how you loaded OS
you may have kept the old drive as active boot and it is going bad
the above will check to see if you install the new drive right
no boot install again without old drive in machine
is this ide or sata or both??
 

Read other 2 answers
RELEVANCY SCORE 59.2

A hard disk partition of my Lenovo G50-70, which has a capacity of 1 TB, has been leading to system freezes for the past few days. Also, i can't copy several files from this partition to any external devices via usb. I ran a hardware scan in lenovo solution center and it failed 3 tests - targeted read test, random seek test and SMART short self test. I'm hoping to get any solutions for this from the experts here and any other users who have faced the same problem or know something about this. The result code of the Hardware scan - WHD01V00M-DL7W5M ?

A:Lenovo G50-70 failed 3 Hard disk tests during hard...

Hi RGN007 , 
 
Welcome to the Community Forums. 
 
Calling technical support would be able to decode error WHD01V00M-DL7W5M using specific internal tools but as it is very evident at the moment with the described performance issue , you may need to replace the harddrive.  
 
S.M.A.R.T. test is a harddrive integrity measure to alert users to backup their files as much as they can to avoid data loss before everything breaks down and make the harddrive unbootable. 
 
Check your warranty and give technical support a call for replacement harddrive. 
 
Hope this help answer your query. 
 
Regards

Read other 2 answers
RELEVANCY SCORE 59.2

My sons K-12 supplied homeschooled HP Notebook quit working. It is not loading Windows 7 OS. It is giving a Hard Disk 1 Fault and Hard Disk 1 quick (303) code.Along with a start up fail. Does this mean the hard drive is toast? And he needs a new notebook?please advise.Thank You

A:getting start up failed "hard disk 1 quick" (303) and a hard...

Hi, Yes, the HDD has gone bad and you will have to replace the HDD.I would also suggest you to run the startup test by tapping F2 as soon as you power on the system.More details about the test http://support.hp.com/us-en/document/c01443317 Details on Troubleshooting http://support.hp.com/us-en/document/c01443371 You can buy one from a local store or also from  http://partsurfer.hp.com (by using the product # of your notebook)





Although I am an HP employee, I am speaking for myself and not for HP.

Read other 9 answers
RELEVANCY SCORE 58.8

AMD Athlon 2200+ with 256MB of DDR Ram.
Biostar M7VIQ motherboard
60GB hard drive
DVD-ROM
DVD-RW

Computer has been starting erratically for awhile. Sometimes it will start., other times it fails and says "HARD DISK NOT FOUND..."

I think the hard drive it finished. With power on I do not feel that 'gyro' effect you normally feel from spinning platters in a good drive.

So I tried a brand new 80GB hard drive. After numerous reboots the BIOS finally recognized it. I was then able to install WinXP. When installation was complete, I did a few Windows updates. Now I'm getting "HARD DISK NOT FOUND..." message again.

Thinking the motherboard battery could be failing, I tried a new one. Made no difference.

I tried new IDE cables. Made no difference.

I set BIOS settings all to default settings. Made no difference. Tried optimized settings. Same thing.

I'm running out of ideas. Anyone have any idea what could be wrong?

PS: Bootup each time is EXTREMELY slow.
 

A:Solved: Hard drive not recognized by BIOS

DOH!

I'm an idiot. I removed the jumper from the new drive (not listed in jumper options) and it is seen every time by the BIOS.

Boots normal speed also...
 

Read other 1 answers