Over 1 million tech questions and answers.

Windows 7 64 bit restarts after resuming from sleep mode

Q: Windows 7 64 bit restarts after resuming from sleep mode

After a recent clean install on a new SSD connected with ESATA rear port(and powered by a usb adapter),
ive been having this problem.

I'm running Windows 7 64 bit Professional w/ SP1
Keep in mind this computer has no internet so the only update ive installed was SP1 standalone installer. No updates past SP1....I've looked into the hotfixes and none of them seem like they would fix this specific problem.....

I leave the computer overnight

I hit the mouse or keyboard to wake the pc up.

Everything seems normal, The login screen comes up and it says locked. I type password.

As soon as i click to open a program or anything. Windows freezes and Restarts within 10 seconds. ( restart cycle, 1. Bios Splash screen 2. esata connected drives are shown 3.Resuming Windows 4. Login screen - locked)

I've noticed that instead of "Starting Windows" is says "Resuming Windows" while it restarts.

I've tested to see if a document stays open after restart and it does. So realistically the sleep is working.

It's not a major problem. It's just been annoying me for awhile. My old install did not restart itself after resuming from sleep.

I can say one thing, it's not the bios ( i did some research on the settings)
The bios is set to S3 (suspend -to - ram)
Power Settings are
Allow hybrid sleep (on)
usb selective suspend (enabled)
hibernate (off)
turn off hard disk after (20 mins)
require a password on wakeup (yes)
allow wake timers (enabled)
put the computer to sleep after (1 hour)

if you can help me out with this minor annoyance i'd truly appreciate it

Thank you
EDIT:
SOLVED
Hybrid sleep is set to (enabled/on)
I updated the SATA/IDE controllers
I updated the jmicron controller
I updated the intel chipset drivers
I changed the bios settings:
Sata controller - changed from IDE to AHCI
Mass Storage Controller - changed from IDE to AHCI

I then started to have another problem so i searched around
My computer was shutting down instead of entering sleep mode

I then followed these steps:
1) Search for "CMD"
2) Right click "CMD" and "Run as Administrator"
3) In the command line, type in "powercfg.exe /hibernate off"

Now my computer sleeps and wakes backup flawlessly plus i have a higher disk windows experience score and im getting better performace on my pc..

Thanks for your help!

RELEVANCY SCORE 200
Preferred Solution: Windows 7 64 bit restarts after resuming from sleep mode

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 7 64 bit restarts after resuming from sleep mode

Very odd. Do the event logs reveal anything?

Read other 9 answers
RELEVANCY SCORE 85.6

Every time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?

A:Windows resuming after sleep mode?

Please fill out your system specs via the option in the user control panel. If you don't know, please download and run this free application:

Speccy - System Information - Free Download

It will tell you all the specs and you can copy them into your account information

Read other 3 answers
RELEVANCY SCORE 84

My Windows 7 is:
- x64 Home Premium SP1
- the original installed OS on the system.
- an OEM version. Came pre-installed on system.

- The age of system (hardware) is 8 Months.
- The age of OS installation is 8 Months.
- Never re-installed.

Hardware is:
Sony VAIO VPC-EB46FX
Intel Core i5 CPU M480 @2.67GHz
4GB Memory

Many Thanks for your help!

A:Windows 7 reboots after resuming from Sleep and Hibernate Mode.

Unfortunately no DMP's were included.

Please try this way...
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 3 answers
RELEVANCY SCORE 84

Just got a new MSI laptop not long ago, recently starting having a few issues with BSOD's. They only occur, but consistently occur, when coming back from sleep mode, or resuming windows. Boot ups are fine, aside from rebooting after a crash...then it takes a couple of tries.I am not incredibly experienced with issues such as this, but I'll post what I know.

The BSOD's I am experiencing are as follows: MEMORY_MANAGEMENT, BAD_POOL_HEADER, PFN_LIST_CORRUPT, SYSTEM_SERVICE_EXCEPTION.

I've not run anything except Whocrashed to analyze anything, and it's result(albeit probably not accurate) was that no offending 3rd party drivers were found. The system runs completely fine doing heavy gaming, and as long as it never goes to sleep it never has any issues. Any leads at all or help finding leads would be greatly appreciated.

A:BSOD when resuming windows/coming out of sleep mode.

Apologies for the self bump, but I can no longer edit my post due to being after 15 minutes. Here's the upload.

Read other 2 answers
RELEVANCY SCORE 76.8

The zip file with the dump files I obtained according to the sticky is attached.
It only BSOD when resuming from sleep mode. I turn it back on and it is a black screen (My monitor's light is brown, as if nothing is plugged in, but it doesn't say no input device). There is no mouse or anything, just a black screen for 10 min. Then it BSOD, restarts, and windows loads. Please help, thank you.
Is Windows 7 . . .
- x64
- the original installed OS on the system? yes
- an OEM or full retail version? full retail
- What is the age of system (hardware)? 1 month
- What is the age of OS installation (have you re-installed the OS?) 5 days

A:BSOD When Resuming From Sleep Mode. Please Help

BSODs caused by PxHlpa64.sys, a driver from sonic solutions, remove/update this driver


Code:
BugCheck C9, {228, fffff88001051f74, fffff980219d2d30, 0}

Unable to load image \SystemRoot\system32\DRIVERS\amdxata.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for amdxata.sys
*** ERROR: Module load completed but symbols could not be loaded for amdxata.sys
Unable to load image \SystemRoot\System32\Drivers\PxHlpa64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PxHlpa64.sys
*** ERROR: Module load completed but symbols could not be loaded for PxHlpa64.sys
Probably caused by : PxHlpa64.sys ( PxHlpa64+2f74 )
Update ASUS monitoring system tools, they use an outdated driver

Code:
ATKDispLowFilter.sys fffff880`04590000 fffff880`04599a00 0x00009a00 0x482a5671 14/05/2008 07:03:13

Read other 7 answers
RELEVANCY SCORE 76.8

Hello Everyone,

I wish someone could help me with this, I bought my laptop a couple of months ago. I keep getting BSOD every time I resume from sleep mode. Thanks in advance.

A:BSOD while resuming from sleep mode.

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to.



Out of 7 memory dumps there were 3 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

The WER section of MSINFO32 shows a lot of Live Kernel Events. These are errors that says Windows doesn't know why it shut down. Most often these are hardware problems, with overheating being the most common. H... Read more

Read other 3 answers
RELEVANCY SCORE 76.8

Whenever i turn the computer on after it has been asleep the sound will not play. It will not play in WMP 11 or in itunes 8. It also says that the test for the sound cant play. Then when you go into the sound control panel it says no audio devices are installed. I have installed the newest driver I could find and it still does it. The thing is, if I restart (the computer) the sound works fine. Or if i install the driver it works fine until the computer goes to sleep.

I have vista Home Premium x64 (service pack 1), AMD Phenom Quad, Nvidia 9800GT video card, Asus M2N-SLI 560 Nforce motherboard, 4 gigs of ram, and the built in sound card is a c-media cm6501. If you need to know more let me know.

thanks

jeremy

A:No sound after resuming from sleep mode

Sounds like the drivers for your sound are not loading when the computer resumes from sleeping.

Read other 4 answers
RELEVANCY SCORE 75.6

I have a gygabyte (GA-P55-UD5) motherboard with dual Lan by realtek , my computerhas been loosing the connection lately, when it returns from sleep. I have download the latest driver from realtek, I have turned off power saving options on the properties of the driver, I have reset the windows TCP/IP Winsock Catalog. I'm at my wits end with this problem.
The computer basically changes the Ip address to something else

Any help would be appreciated

A:Lost IPv4 when resuming from sleep mode

  
Quote: Originally Posted by bejitar


I have a gygabyte (GA-P55-UD5) motherboard with dual Lan by realtek , my computerhas been loosing the connection lately, when it returns from sleep. I have download the latest driver from realtek, I have turned off power saving options on the properties of the driver, I have reset the windows TCP/IP Winsock Catalog. I'm at my wits end with this problem.
The computer basically changes the Ip address to something else

Any help would be appreciated


It would help us to know the before and after IP addresses.

Also are you connecting direct to your modem or through a router?

Read other 5 answers
RELEVANCY SCORE 75.6

Hello,

Ever since I upgraded to W10 Pro (from W8.1 Pro) my PC has started bluescreening when resuming from Sleep. MEMORY_MANAGEMENT is the most common one, and the only one that has occured so far after upgrade to Build 10586 (upgraded 2015-11-13).
BSODs KMODE_EXCEPTION_NOT_HANDLED (NTFS.sys), SYSTEM_SERVICE_EXCEPTION, KERNEL_SECURITY_CHECK_FAILURE occured before upgrade to Build 10586, and might happen again. Minidumps for these disappeared during upgrade to latest W10 build

BIOS is the latest one. Ran Memtest86+ yesterday, 8 passes with all 11 tests, no errors found. Windows Memory Diagnostics didn?t find anything either.

Please help, warranty on all hardware will run out in a month and need to find out if any HW needs to be changed.
Greetings from Gothenburg, Sweden


3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041201, The subtype of the bugcheck.
Arg2: fffff6800001e090
Arg3: c7200001eda3c847
Arg4: ffffe000607d0930
Debugging Details:
------------------


DUMP_FILE_ATTRI... Read more

A:BSOD MEMORY_MANAGEMENT when resuming from Sleep mode

Have you read BSOD Posting Instructions?

Read other 11 answers
RELEVANCY SCORE 74.8

Last night, I was using my laptop to get some last minute work done. As I opened a new document, the power randomly went out and came back on one minute later. After that, I finished up what I was doing and went to bed. About 8 hours later, I woke up and heard a ringing sound, but I just thought my ears were ringing. As I got dressed, the ringing persisted.

As I needed to do something on the laptop, I flipped the screen open. Not only was the charger on, (its an igo green adapter, it usually shuts off when the laptop is off), the wifi light and hard drive light were solid. When I pressed a key on the keyboard, nothing happened. Not even using the trackpad would wake the thing up. Then I noticed that it was the laptop making the ringing. As nothing would work, I pressed and held the power button until it turned off. It started up, and I am using it to type this. When I put it to sleep again, will the same thing happen? And what caused it?
 

Read other answers
RELEVANCY SCORE 74.8

Hey there,

I recently upgraded my notebook hard drive from a Western Digital WD2500BEVT 250GB to a SAMSUNG Spinpoint M7E HM641JI 640GB hard drive (and "cloned" from the old to the new). The only problem since the switch is when I resume from sleep mode. My laptop goes into sleep mode fine, but upon resuming, it correctly shows the log-in screen (there is a password on my account) for a few seconds, then proceeds to flash a BSOD for a split-second before restarting and showing the error recovery, unexpected shutdown screen. I have looked in my minidump file folder, but no recent dumps show up, so I am not attaching the file. The event logger shows many errors, including Kernal-Power event ID 41.

I have tried playing with the sleep settings (hybrid sleep, etc.) in the Advanced Power Settings with no luck. Drivers are all up-to-date. I assume it is a problem with the new Samsung hard drive. With my old drive, the moment I woke the computer from sleep, I would be able to log-in and resume where I left off almost instantly.

I attached the Event Viewer log in a .zip file.

Windows 7 Ultimate x64 Retail
Hardware approx. 2 years old (Samsung HDD is new)
Last OS installation approx. 6-8 months ago (Old HDD was "cloned" to the new 640GB HDD)
System Health Report passed with no errors

Gateway T-6836 Laptop
Intel GM965 chipset
Intel Core 2 Duo T5750 @ 2.00 GHz
4GB Memory
Intel Graphics Media Accelerator X3100

Thanks,
Sha... Read more

A:When resuming from Sleep mode, BSOD and restart occurs

make sure you have set your system to create minidump:





Quote:
Windows 7:
Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that "Automatically restart" is unchecked
Under the Write Debugging Information header select "Small memory dump (64 kB)" in the dropdown box
Ensure that the Small Dump Directory is listed as "%systemroot%\Minidump" (without the quotes)
Click OK twice to exit the dialogs, then reboot for the changes to take effect.



If you are using any program such as CCleaner, they may clean out your minidump folder, please double check that

Read other 5 answers
RELEVANCY SCORE 74

Hello all,

I would just like to start off by saying that this is my first post. So, thank you in advance for taking the time to read this.

As the title suggests, I am having issues waking my computer. I have read through numerous threads with this same problem, but none of them seem to be having the same issues as I'm having.

Upon trying to wake my computer from sleep mode (forced sleep mode), it will either freeze and has to be reset or it has already reset itself and is sitting on the start up screen where it says something like, "Continue with previous Windows session," or "Reset and start a new Windows session."

If I choose "Continue with Previous Session" it says, "Loading Windows," but before it gets to the username welcome screen it freezes and has a blinking hyphen in the top left corner of the screen. When this happens I need to reset my computer yet again and choose the "Reset and start a new session" option.

Any ideas what might be happening? I have updated my drivers and checked my ram with Windows Memory Utility.

Oh, and just today I was testing Sleep Mode. I put the monitor to sleep but couldn't wake it back up either. I could hear the computer running but the display would not turn on. So yet again, I had to reset the computer. Not sure if this was a coincidence or if it is related (which I'm thinking it is).

Now just some FYI's:

I can only use forced sleep mode because from day 1 of building t... Read more

A:Windows 7 Restarts from Forced Sleep Mode

Do you still need assistance with this issue?

Read other 1 answers
RELEVANCY SCORE 74

I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't help. The problem only started occurring after one of the following:
- Updating Malwarebytes to latest last week
- Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were)
- Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com
Here is a log created by BluescreenView:
==================================================
Dump File : 060514-96281-01.dmp
Crash Time : 6/5/2014 7:23:39 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe001`218f88e0
Parameter 3 : ffffd000`bff2b930
Parameter 4 : ffffe001`2561d1c0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153fa0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+153f... Read more

A:Driver power state failure after resuming from sleep mode

Hi Lan1 and welcome to the forums ^_^,

I have analyzed your Dump file and below has been provided an analysis of your dump file for informative purposes :-

Code:
2: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00135b5c060, Physical Device Object of the stack
Arg3: ffffd000c3df9930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0013217d880, The blocked IRP
Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3
DRIVER_OBJECT: ffffe00135b70c30
IMAGE_NAME: usbccgp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52678625
MODULE_NAME: usbccgp
FAULTING_MODULE: fffff80157d82000 usbccgp
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`c3df98f8 fffff801`31803c1e : 00... Read more

Read other 7 answers
RELEVANCY SCORE 74

Hello,
I have an external USB 3.0 Hard Drive I use to run Portable Apps plugged into my Precision T3610 rear USB 3.0 port.  This setup worked flawlessly running Windows 7 Pro.
I upgraded to Windows 10 Pro and now my external drive disconnects causing my apps to crash when resuming from Sleep Mode.  Under Power Options, I turned off USB Selective Suspend and unchecked all "Allow the computer to turn off this device to save power" Power Management tab for all Universal Serial Bus Controllers under Device Manager.  I also updated my machine to the latest BIOS and drivers from Dell.
Since I have my Toshiba laptop running Windows 10 using the same external hard drive setup with no problems, is there a Windows 10 driver issue with Dell's USB 3.0 port?  Has anyone experienced the same problem?  Any help would be greatly appreciated.
Thanks,
Brandon

A:Precision T3610 USB 3.0 Port Disconnects resuming from Sleep Mode

behofmann,Click the link below to try some of the settings suggested in the thread on the Windows 10 forum.  When you your system drivers did you update the chipset drivers as well? Sleep/Wake Issues in Windows 10

Read other 3 answers
RELEVANCY SCORE 74

[I posted this earlier in the Crashes and Debugging section, but we think this is a hardware problem:]

Hey there,

I recently upgraded my notebook hard drive from a Western Digital WD2500BEVT 250GB to a SAMSUNG Spinpoint M7E HM641JI 640GB hard drive (and "cloned" from the old to the new). The only problem since the switch is when I resume from sleep mode. My laptop goes into sleep mode fine, but upon resuming, it correctly shows the log-in screen (there is a password on my account) for a few seconds, then proceeds to show a BSOD ***STOP 0x000000F4. Upon restart (I am forced to press the power button), the computer shows the error recovery, unexpected shutdown screen. I have looked in my minidump file folder, but no recent dumps show up, so I am not attaching the file. The event logger shows many errors, including Kernal-Power event ID 41.

I have tried playing with the sleep settings (hybrid sleep, etc.) in the Advanced Power Settings with no luck. Drivers are all up-to-date. With my old drive, the moment I woke the computer from sleep, I would be able to log-in and resume where I left off almost instantly.

I attached the Event Viewer log in a .zip file, if that would help somehow.

Windows 7 Ultimate x64 Retail
Hardware and computer approx. 2 years old (Samsung HDD is new)
Last OS installation approx. 6-8 months ago (Old HDD was "cloned" to the new 640GB HDD)
System Health Report passed with no errors

Gateway T-6836 Lapto... Read more

A:Upgraded HDD - When resuming from Sleep mode, BSOD and restart occurs

Any ideas why sleep mode no longer works once I upgraded from a 250GB to a 640GB hard drive?

Thanks

Read other 1 answers
RELEVANCY SCORE 73.2

Hello and sorry for the intrusion or any inconvenience.

I am running a "Windows XP home edition version 2002" Intel(R) Pentium(R) 4CPU 2.80GHz, 2.00GB of RAM

The problem persists after a while on the computer. My computer restarts, and/or freezes and sometimes when I try to restart my computer screen acts as if it is in sleep mode and never turns on, only after a while that I have my computer off does it start normally. Only recently have I had this problem where my anti-virus doesn't want to start up. Also when I tried to run a "GMER Rootkit Scan" my computer automatically restarted itself, so I can't do one.

I have a windows XP installation disk, would you recommend me to send my computer to a fix shop?

_________________________________________________________________

DDS (Ver_09-12-01.01) - NTFSx86
Run by Brian at 11:46:39.64 on Tue 01/19/2010
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_17
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.2047.829 [GMT -8:00]

AV: PC Tools AntiVirus 6.0.0.19 *On-access scanning enabled* (Updated) {832E7172-E406-4bb2-8B19-6D29F2C93A98}

============== Running Processes ===============

C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
C:\WINDOWS\system32\svchost -k rpcss
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k NetworkService
C:\WINDOWS\system32\svchost.exe -k LocalService
C:\WINDOWS\system32\spool... Read more

A:Windows XP (restarts,freezes, screen in sleep mode)

Hi,

Please do the following:


Download ComboFix from one of the following locations:
Link 1
Link 2

VERY IMPORTANT !!! Save ComboFix.exe to your Desktop

* IMPORTANT - Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools. If you have difficulty properly disabling your protective programs, refer to this link here Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.
Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.
**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.


Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:


Click on Yes, to continue scanning for malware.
When finished, it ... Read more

Read other 11 answers
RELEVANCY SCORE 73.2

I have WinXP and my computer restarts or enters sleep mode (if sleep mode: computer can not be 'woken' from sleep) with out warning every 15 mins.

Also when it restarts it comes up with 'Windows Has Recovered from a serious error' with some files that are effected...

I have been told it could be the RAM...

Any Help?
 

A:XP - Windows restarts or enters sleep mode without warning

Hello Adam. It appears to be a Power Management issue in Windows XP. In that case, you might find the following article useful.

Configure Windows XP power management

Hope that helps.

-- Goku
 

Read other 2 answers
RELEVANCY SCORE 67.2

Has any one else experience abnormalities after resuming from sleep? I haven't done anything special with my laptop, most of all the programs on my laptop came from the Asus website.

Whenever my PC resumes from sleep, it refuses to open any application, Asus Smart Gesture crashes, so I lose my ability to scroll/slide to open charm menu, Google Chrome/Firefox similarly crash and refuse to reopen. Even restarting the computer doesn't work, because its stuck on the Restarting page.
However if I hold power button on the case, to forcefully shut it down, the PC will restart within a few seconds and works perfectly.

Device manger doesn't show any errors with drivers, but could there be a problem with the SSD not resuming from sleep?

There were no issues when running Windows 7.

HARDWARE"
Asus N56VZ
Adata SX900 256GB (the only modification)

I also noticed from day 1 that the hot keys to increase brightness freeze up when you get the higher ones, same goes for the back-lit keyboard, and wireless ON/OFF.

Read other answers
RELEVANCY SCORE 67.2

Hi all,

I am not able to resume widows 7 (64 bit) from sleep. The screen is just blank, i think the PC has crashed as the caps lock button does turn the light on the keyboard, but there is no BSOD files. My set up is

ASUS M3N78-VM
onboard Nvidia geforce 8200
AMD tripple core
Windows 7 64
compro videomate s350

i believe i have updated all the drivers and have update the bios.
please can someone help, i'm trying to use this as a media center but without sleep the pc takes to long to boot!

A:windows not resuming after sleep

I have exactly the same problem.
Did you try to dissable Asus Cool n Quiet and Q-Fan?

Read other 3 answers
RELEVANCY SCORE 67.2

My system was never able to resume from sleep. Tried several things, BIOS settings, settings for power management etc.
Thought it could be related to recovery software or other installed drivers etc.

But now: I replaced my harddisk with a SSD, did a fresh install of W7 Ultimate 64. Removed all possible hardware (tv card, usb devices except keyboard / mouse). Tried fail save options in BIOS and optimized settings as well but no luck.
Got most windows updates in place, installed all the latest drivers from the motherboard and graphics card, latest bios drivers and still getting BSOD.

Who can help me solving this so I can save lots of energy.
Followed the manual to attach zip file with minidumps etc. Please let me know when additional info is required.

Details about what happens:
When I put my system into sleep it goes well. When I try to wake my system:
often nothing happens and I have to shut it down holding start button
or I get back my desktop but within a few seconds I get a BSOD.

If I have seen it well I posted several minidumps, so I hope it is not too difficult to find the ones related to the resume from sleep.
Kind regards,

Michel

A:BSOD while resuming from sleep, or not resuming from sleep at all

Welcome aboard

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Read other 3 answers
RELEVANCY SCORE 66.4

Hi all,

I'm getting a DPC_WATCHDOG_VIOLATION resuming from sleep but I think I got one trying to shutdown once but maybe it was shutting down to sleep.

Thanks for any help.

A:DPC_WATCHDOG_VIOLATION resuming from sleep. Windows 8 64

Welcome
Tentatively it appears that your problem is due to a driver. The information given indicates a driver that is not the most likely cause. See if driver verfier can detect the true problem. Run for 36 hours
Verifying Drivers: Enable or disable the Driver verifier in Windows 8

Read other 10 answers
RELEVANCY SCORE 66.4

SOLVED, SEE BELOW

See 2nd post, I will try fix today.

Core i7 930
GIGABYTE GA-X58A-UD3R, F4 BIOS, BOARD REV 1.0
GeIL Memory Model # GV36GB1600C9TC (2GB x 3 Triple Channel)
CORSAIR CMPSU-750TX 750W ATX12V / EPS12V
XFX HD-587X-ZNFC Radeon HD 5870 1GB
Western Digital Caviar Black WD7501AALS 750GB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5
(2) Seagate 1.5TB ST31500341AS Drives used for data storage NON RAID, SATA 3.0Gb/s
Liteon DVD Burner Model iHAS124-04 SATA
Some old SB Audigy PCI sound card

Problem: Put computer into sleep mode manually or automatically via power settings. When waking up computer, Windows login screen is there and system is responsive. About 1min later the system blue screens. It appears to be I/O disk related however I have exhausted all tests that I know. One thing to note is that it seems like the hard drives don't power back up from sleep (I can't tell for sure fans are noisy) because the HDD led flashes consistently and equally (off, on, off, on) before the crash happens. Typing in the password to login to windows gives no results as once whatever is trying to happen times out, the BSOD hits.

Tests:
CPU stress: prime95, super pi, passmark burnin
HDD tests: Seagate tools and WD tools from DOS mode (booting from cd, etc)
Mem tests: Memtest86+ v4.00 via bootable CD, ran for 2hrs without error.

I've also ran some H.264 encodes for a few hours (just dvd -> mkv) and no stability issues. Pretty much as long as I leave the system running, ... Read more

A:BSOD Windows 7 x64 when resuming from sleep

heh, guess I should have read this sticky lol... seems like my problem.

Read other 3 answers
RELEVANCY SCORE 66.4

Just upgraded to windows 10 on a 2011 Dell XPS l502x.

? OS - Windows 10 x64
? What was the original installed OS on the system? Windows 7
? Windows 7 came pre-installed
? Approximate age of system (hardware) - 4 years
? Approximate age of OS installation (if you know) 3 days for win 10
? Have you re-installed the OS? no

? CPU - 2 gen i7
? Video Card NVIDA 525
? System Manufacturer DELL - XPS l502x

Read other answers
RELEVANCY SCORE 66.4

I am running a dell inspiron 17r se laptop and every time I try to use my computer after it has been in sleep mode I get a blue screen error message and my laptop automatically restarts. I do not get any blue screens at any other time besides when my computer resumes from sleep. I have done multiple fresh windows 8 installs but I am still getting the blue screen error. When I run the program "BlueScreenView" these are the two messages I receive:

032413-9187-01.dmp 3/24/2013 7:02:08 AM CRITICAL_PROCESS_DIED 0x000000ef fffffa80`13708640 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7a040 x64 ntoskrnl.exe+7a040 C:\Windows\Minidump\032413-9187-01.dmp 8 15 9200 283,112

and

032413-6140-01.dmp 3/24/2013 5:40:36 AM CRITICAL_PROCESS_DIED 0x000000ef fffffa80`1591b080 00000000`00000000 00000000`00000000 00000000`00000000 win32k.sys win32k.sys+15884080 x64 ntoskrnl.exe+7a040 C:\Windows\Minidump\032413-6140-01.dmp 8 15 9200 291,232

dropbox link to minidump files: https://www.dropbox.com/s/n2xt4ipf1p2hh86/032413-6140-01.dmp

https://www.dropbox.com/s/azilu4p6mkx59hj/032413-9187-01.dmp

I cannot seem to fix this. I appreciate any help! Thank you
 

A:Windows 8 Crashes only when resuming from sleep

run windows update

d/load and run the h/drive makers diagnostic utility on the h/drive

http://www.tacktech.com/display.cfm?ttid=287
check for virus infection ect.

run malwarebytes

http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html
 

Read other 1 answers
RELEVANCY SCORE 66.4

I am running a dell inspiron 17r se laptop and every time I try to use my computer after it has been in sleep mode I get a blue screen error message and my laptop automatically restarts. I do not get any blue screens at any other time besides when my computer resumes from sleep. I have done multiple fresh windows 8 installs but I am still getting the blue screen error. When I run the program "BlueScreenView" these are the two messages I receive:
 
032413-9187-01.dmp 3/24/2013 7:02:08 AM CRITICAL_PROCESS_DIED 0x000000ef fffffa80`13708640 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7a040 x64 ntoskrnl.exe+7a040 C:\Windows\Minidump\032413-9187-01.dmp 8 15 9200 283,112
 
and
 
032413-6140-01.dmp 3/24/2013 5:40:36 AM CRITICAL_PROCESS_DIED 0x000000ef fffffa80`1591b080 00000000`00000000 00000000`00000000 00000000`00000000 win32k.sys win32k.sys+15884080 x64 ntoskrnl.exe+7a040 C:\Windows\Minidump\032413-6140-01.dmp 8 15 9200 291,232
 
I cannot seem to fix this. I appreciate any help! Thank you

A:Windows 8 Crashes only when resuming from sleep

Hello knlmwq,If we could gather a little more information about the problem computer, it might prove helpful in pointing toward a solution.1. )  Please follow this link:  BSOD Posting Instructions Windows 8 - Windows 7 - Vista.Follow all instructions with the exception of:Create a new thread HERE and attach the file(s) after step 4Note: Both files, autoruns and JCGriff2 BSOD collection app, of Step 1 need to be in the Documents folder.Next, Upload the zipped folder to a File Sharing website of your choosing because Bleeping Computer has a 512 K only upload limit and this file will be much larger.   For a listing of free File Sharing websites see: http://technojourney.com/trending/best-alternatives-megaupload-and-filesonic-file-hosting/or you may use File Dropper or Box.com.Please post a link to the file in your next post.2. )  To help us get a better look at your computer's hardware, please download and install Speccy by Piriform. (mirror site)Run Speccy and from the top menu, select File --> Publish Snapshot.  Click "Yes" to proceed.Click, Copy to Clipboard and  paste this address into your next post.3. )  Please download MiniToolBox by Farbar, save it to your Desktop, then run it.Check the following checkbox:List Installed ProgramsThen click Go.Highlight the contents of  Result.txt.  Copy (Ctrl + C), then Paste (Ctrl + V)  the contents of this file into your next post.  

Read other 5 answers
RELEVANCY SCORE 66

On windows 8.1 updates up to date as of a couple of weeks ago.

Sometimes when it's time for the computer to shut down and sleep on the auto timer it clicks off and resets instead of sleeping.

Only started happening the past week or so.

Any ideas?

A:Computer restarts instead of going into sleep mode

Try Restoring to an older date, prior to this starting to happen.

Read other 1 answers
RELEVANCY SCORE 66

I have a Surface Pro 3 running W8.1 with all updates installed. When I wake the computer from sleep mode, all my open programs are closed and the computer has restarted. In looking at system event logs it indicates that a Kernel-Power issue occurred and the system has restarted. I know of two others in my office that have similar problems. Thanks for you help.

A:SP3 Restarts randomly when in sleep mode.

What do you have in common with the other 2 systems? I'd especially look at wifi enabled programs.

Looks to me like a networking problem, most likely with something related to the wifi.
Please run Driver Verifier according to these instructions: Driver Verifier Settings
I suspect that something is interfering with the wifi, but it hasn't left any traces in the memory dumps.

Be sure that you have ALL available Windows Updates for this system.

Analysis:
The following is for informational purposes only.

Code:
**************************Wed Mar 18 14:00:15.208 2015 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\031815-7375-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
System Uptime:0 days 2:55:00.802
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by :pci.sys
BugCheck 9F, {3, ffffe00101f9b060, fffff80218221960, ffffe001019ae270}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00101f9b060, Physical Device Object of the stack
Arg3: fffff80218221960, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe001019ae270, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_wificlass_IMAGE_pci.sys
CPUID: ... Read more

Read other 4 answers
RELEVANCY SCORE 66

Occasionally during Sleep Mode, the laptop restarts for unknown reasons. But I just noticed that it has restarted when I log in.I'm not sure whether this is caused by background updates of Windows 10, because I don't see a screen with updating or anything. AFAIK, the random restarts happened when the laptop ran on battery mode, but maybe that happens by accident.I already configured in Energy Manager that the hard disk never gets turned off, but that apparently doesn't work. What suggestions do you have to solve this random restart issue, without disabling sleep mode after X minutes?

A:Yoga 910 sometimes restarts during sleep mode

Windows will not update while in sleep mode, since your system is effectively turned off, so that is not the issue. Normally when you system is in sleep mode for a while, it eventually goes into hibernation (writes the data from memory to the hard drive) and shuts off.   This is to preserve the battery, and to prevent data loss should the battery die. The data is written to a hidden file on the root of the C:\ drive called hiberfil.sys, which is usually pretty large, about 6GB or so, and sometimes that file gets corrupted, and cannot be read when you try to resume, and thus the laptop reboot since it has no saved state from which to resume.     To fix that problem, you need to disable hibernation, and then re-enable it by following the steps below.. Disable/re-enable hibernationRight Click on Start and select Command Prompt (Admin)In the Command Prompt (Admin) window, type:  powercfg.exe /h offIt will take a minute or so for the command prompt to return as it deletes the existing hiberfil.sys fileOnce the prompt returns, type: powercfg.exe /h onThe prompt should almost immediately return, and the new hiberfil.sys file has been created.Close the Command Prompt (Admin) window Hope that helps. Cheers,

Read other 1 answers
RELEVANCY SCORE 65.6

I recently upsized my SSD drive and changed from a samsung 830 to a larger crucial drive.

This is a custom built computer that is on it's second MB and cpu combo and had been stable for years until just recently with the new drive addition, so I do not feel it is a driver or something along these lines. I am unsure if it may be RAM or just a bad SSD.

I used windows home server to re-image the c drive from the samsung to to the crucial drive. It ran with no problems for several weeks and then the Blue screens started on resuming from sleep and hibernation.

I have included the zip file from the debugging bat file as instructed from these forums. I have tried to add the dump file but the uploader is telling me it is an invalid file and not accepting it.

The blue screen does indicate that it is a kernal_data_inpage_error.

It list off half a dozen error codes as well, that I can add if needed.

Thanks for any help you can give.

A:BSOD upon resuming from sleep or hibernation on windows 7 64 bit

The uploaded zip is empty. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 9 answers
RELEVANCY SCORE 65.6

The IR camera on my P1 has started acting up when I resume from sleep. The camera works, authenticates me for Windows Hello, then the two red IR LED's keep flashing, until I log off or restart. Any idea what could be causing this? Normally they just turn off once I'm authenticated. TIA! -kj-





P1: 8850H, FHD, 16gb, 512gb, P2000, IR Camera, Windows 10 ProT450s & X201t & M93p, too

Read other answers
RELEVANCY SCORE 65.6

My system has started freezing after resuming from sleep within the last days. My computer naturally goes into sleep mode after being inactive for a period of time, my computer shuts down and has a blue blinking light on my Dell Desktop Vostro 220. After I move the mouse to wake my computer up, the computer comes up to the Windows Login screen and hangs for a couple minutes. After the minutes has passed, you are able to type your password and login to the Windows System. Once it brings up the deskop, it hangs again for several minutes before allowing to operate Windows normally. It never did this and have no clue why it would start doing it now. Could this possibly be hardware related?

I'm not sure what information would be helpful in this situation so here is a HJT log so you can see details about my system and programs that are running.

I've also done have been defragging my computer system, running thorough virus scans, dumping temp files/disk cleanup, and removing unnecessary items from Startup . None of this has seemed to help.

Any help would be GREATLY appreciated!!!!!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:08:10 PM, on 11/13/2009
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v7.00 (7.00.6002.18005)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Intel\Intel Matrix Storage Manage... Read more

Read other answers
RELEVANCY SCORE 65.2

hi, since a few days ago i have this weird problem, my latpop Y50-70 restarts everytime it enters sleep mode and I want to wake it up.I have windows 10 installed and I've uptated all the drivers.any solutions?

Read other answers
RELEVANCY SCORE 65.2

My computer has been little weird lately. When I'm doing almost nothing, and computer is basically under 0% stress ( reading FB for example ) it's okay, but soon as I start some program, and the computer goes under stress ( fans start to go faster ) it kind of 'freezes' for sec, then continues.

This hasn't really bothered me so much until today.

I Was playing League of Legends and the game ( match ) was loading. My fans were running very lightly, even thought it was loading ( I have putted the fan speeds to slowest from Asrock autotuner about 3 months ago, not a one problem has occurred until recently this weirdness ). Anyway the moment when the match was about to start, first my fans went crazy, then the screen went black, fans slowed down, and it said " computer going to sleep " or something. Then few seconds later it shutdown and restarted. This same thing happen'd 2-3 times in row, when I was trying to get back to the game. Now I'm here writing this and running a virus check. It seems like it doesn't crash until I open up some heavy program.

Anyways, I got some Minidumps. I'm hoping you could analyze them and check if you can find any reason for this.

My specs are in my profile.

Thanks in advance !

- BenQ

A:Computer goes into sleep mode, then immediately restarts.

I can't read rar. It does sound like a overheating problem. Use a program like this.
Open Hardware Monitor - CNET Download.com

Remove the over clock and see if you still have the same problem.

Read other 7 answers
RELEVANCY SCORE 65.2

When I place the laptop in sleep mode (regardless of method of doing so), it restarts after coming out from sleep mode. Any sugestions for how to correct this would be appreciated.

Read other answers
RELEVANCY SCORE 64.8

Hello,

I have a Dell XPS L702X (i5 -2.3 Ghz, 6GB RAM) laptop running Windows 7 Home Premium 64-Bit that has been giving me issues for some time now and I haven't been able to find a solution. Windows explorer works fine when I start the computer. However, after resuming from sleep, 90% of the time trying to open any explorer window (my computer, my docs, etc.) will not work. I can open up documents within their respective applications (a word doc by opening word first, for example). But double clicking folders doesn't do anything, neither from the desktop nor from the start menu. When this happens, I've noticed 2 instances of explorer running in the task manager, in order to get it to work again I have to force quit both of them and log off. When I log on again, it usually works again. HOWEVER, if I leave an explorer window open before putting the laptop in sleep mode, it works fine upon resuming.

All drivers are up to date, as well as the Bios version. This has been driving me crazy for some time, would appreciate if anyone has an solution. Thanks!

Read other answers
RELEVANCY SCORE 64.8

After 9 months of trying to run this down, installing and reinstalling Win7, updating drivers etc. I finally solved a problem I have been having with Windows 7 crashing when resuming from sleep mode. Hopefully this will help others.

The problem I had showed in the Event Viewer as a Kernel Power Error and the symptoms were, when resuming from sleep, that the screen would slowly (every few seconds) cycle from black then back to showing the desktop / open windows. The cursor would also be mostly non-responsive and the taskbar background would be black when the screen was on. Also, a video driver error message would pop up in the notifications area at the bottom of the screen. Ultimately I would have to do a hard re-boot by pressing and holding the power button. The Event Viewer error message referred to the video driver atikmdag.

My machine is a core 2 duo Toshiba A300-ST4004 laptop with an ATI Radeon Mobility HD3650 video card.

SOLUTION (actually - a work-around): by minimizing all active windows (i.e., showing the desktop) before putting the machine into "sleep" mode, my system now sleeps / resumes from sleep without any issues or crashing. Seems unbelievable that something so simple would work, but it does. System has been stable for over 48 hours without a crash.

I hope this helps others.

A:Problem Solved with Windows 7 Crash When Resuming from Sleep

Thanks for the solution.

Let me just try this. I ll close the lid after minimizing all windows i.e. cltr+D and then reopen lets see if it crashes again or not.

thanks again.

Read other 2 answers
RELEVANCY SCORE 64.4

Hello this is my first post and I'll try to describe the issue best I can

Specs:
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (4 CPUs), ~3.3GHz
Memory: CORSAIR VENGANCE 2X 2gig 1600mhz ddr3 2 X 4gig 1600mhz ddr3 1.50v = 12gig of Ram
Video Card: Powercolor Radeon HD6950
Operating System: Windows 7 Ultimate 64-bit
Motherboard: Asus P8P67 R3 Socket 1155 USB 3.0 Bluetooth 8 Channel Audio ATX Motherboard
Power : Antec TruePower New 650W Modular PSU
The Issue started to happen after adding more Ram (extra 8 gig of ram on top of 4) and Replacing Fried GPU (ASUS HD 6850 )
all at the same Time)
so what happens? when I turn on the PC it switches off after 3 seconds (blank screen) I repeat the process 1-3 times (for some reason its random. Rarely it switches on straight away)
like 1 in 10 I'll get message that that over clocking failed on top of that (everything is on stock settings) mostly after sleep mode

after all of that to proceeds to boot and everything works fine. it does not stop me in normally using the machine but its definitely annoying and I would like to fix it since I'm not planing on reinstalling system from scratch anytime soon
 

A:Solved: constant restarts reqired after sleep mode

Read other 8 answers
RELEVANCY SCORE 64.4

Whenever I put the screen down for the night, or after classes, when I open it up again, it informs me of an automatic restart due to a problem it has encountered with files in the Minidump folder and a Local sysdata.xml file. I have attached the file.

A:BSOD after sleep mode. Constant restarts after hibernate.

Please check to ensure that you have ALL available Windows Updates. It may take several trips to get them all.

Please uninstall the MotionInJoy program and physically remove the controller from your system (it's blamed in 2 of the memory dumps).
The xusb21.sys driver that dates from 2009 is known to cause BSOD's in some Windows systems. Unfortunately, there is no update available for this driver - so the only "solution" is to get another later-model controller (with the xusb22.sys driver).

Please uninstall the Paragon Software Group Apple Partition Map Driver as it is blamed in 2 of the memory dumps.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Tue May 13 02:46:54.447 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\051314-14406-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 7:23:45.189
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by :ntkrnlmp.exe ( nt!KiSwapContext+76 )
BugCheck 9F, {4, 12c, fffffa8010d554c0, fffff880009f4810}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting... Read more

Read other 1 answers
RELEVANCY SCORE 64.4

Hello.

After upgrading from windows 8 to windows 10, the laptop wont wake up correctly and just restart.

I have an Asus Q551LN

* Upgraded the latest drivers of everything, including the intel hd graphics, the same with the nvidia integrated ones and then downgraded.
* I did a clean install of my OS.
* Checked and settled many options in the power management, recommended from other users/forums/etc.
* Disabled and Enabled again the Intel Management Engine
* Flashed new BIOS firmware.

Nothing worked for me.

If someone can help me clarify the problem, I would be very grateful.

Read other answers
RELEVANCY SCORE 64.4

Hello All,  I really hope someone can help me with my issue as i have tried calling HP support but i keep getting bounced around which is really disgusting. I have an Elitebook 9480m which i recently purchased. I noticed when i put the laptop to sleep it works fine BUT when i try to wake it up, it automatically reboots which is annoying. I need help on this.  Thanks 

Read other answers
RELEVANCY SCORE 64

I've got two 4K babies hooked up to the P72 and it's fantastic to work with.  However, the windows all cram into the laptop screen when I go back to use the computer after being away. Do you know of any robust software that'll 'memorise' the position of windows?





P72 Xeon 96GBX1 Carbon 16GB 1TBP50 Xeon 64GB RAID0 2x970 Pro

Read other answers
RELEVANCY SCORE 64

I don't mind the password protection on my windows 8 laptop, and i must have disabled it when i first got the computer. It still has a password on startup, but not when resuming from sleep mode, and i think it used to have that. i want it back, How do I get it?

A:[SOLVED] I want to enable the password protection when resuming windows from sleep

Please see here How to enable or disable Windows 8 password query when resuming from sleep mode?

Read other 3 answers
RELEVANCY SCORE 63.6

Hi,I have updated a few days ago to windows 10 creators update and ever since have the following problem.whenever the computer recovers from sleep, as soon I move the mouse or type anything or login with the fingerprint the computer crashes (BSOD) and I get the following error message:SYSTEM_THREAD_EXCEPTION NOT HANDLED I have updated all drivers but didn't work. Useless to say I'm very annoyed since i need to work with my laptop and the sleep function is critical.Can somebody help me?  

Read other answers
RELEVANCY SCORE 63.6

Hello,

I just installed a fresh Windows 7 Home x32 French on a new PC of a friend.
I installed french Windows Live Mail Version 2011 (Build 15.4.3555.0308) .

Everything works great except when the PC goes out from sleep state, WLM is then unable to retrieve all the waiting emails while the PC was sleeping.
It is only able to get just the last email sent me 3-4 mn before the awakening.
Even if I press F5 several times, no emails at all is downloaded.

On my personal Desktop Windows 7 Ulimate x64 english, I use Outlook 2010 but for fun I installed WLM 2011 same version. Even when I launch it, several days after the last send/receive performed manually, my WLM retrieve all the waiting emails.

TOTALLY unable to understand this stupid behavior.

Thanks for your help

A:Emails missing from Windows Live Mail 2011 after resuming from sleep

I resolved my issue.
I just let you known the fix in case of others falls in the trap.

1) I had to know that the mailbox of the Internet Provider was hosted invisibly by Gmail
2) I had to know that Gmail allows only ONE download for each email. After the uniq download the email is flagged as downloaded and nobody else could get it again except from getting connect to WebMail Gmail
3) I configured my Windows Live Hotmail to retrieve the emails from this email adress
4) I configured as well Windows Live Mail to retrieve the emails from this email adress

Consequence:
As Windows Live Hotmail retrieve email every 30mn (PS: max 50 emails each time), when WLM was not running (PC in sleeping mode) all the emails were downloaded to Hotmail. When WLM was running and was retrieving email every 10mn everything went pretty good except if the hotmail extraction occurred just between 2 WLM extractions thus stolen eventual emails from WLM.

Solution:
I removed the reception of the mails from my Live ID of Windows Live Hotmail

Read other 1 answers
RELEVANCY SCORE 63.2

Hi, I've got a Toshiba Satellite Pro A120 (1.5 yrs old; Intel core 2 CPU 2.33GHz; 2GB RAM) with Vista Business (SP1 32bit) and often when I put it to sleep, it will hang or crash on resume forcing me to to do a hard shut down. Sometimes the screen will just be totally black and hang, and sometimes it will get to vista's "resuming" splash screen or even the login screen and then hang/crash. Often the disk activity LED will remain on indefinitely (due to the hang) even though I can't hear any disk activity. As far as I'm aware all my drivers are up to date. I'm just so fed up with loosing documents and personal settings now I've got to do something about it, and from googling, it seems this is a pretty widespread problem but I've not come across a solution that's worked for me - I've even installed the extra KB patch that was meant to fix it.

Also, sometimes when I put it to sleep (fully charged) and not use it for a a few hours, I find that the laptop has lost power during sleep because the battery has been run flat and the ventilation grille feels warm, even though I know that the battery can normally last much much longer on sleep. Is it possible that the computer resumed itself from sleep to hibernate after 200 mins on battery (as my power settings dictate) and then crashed whilst resuming, causing it to drain itself flat (since it my laptop should have entered automatic hibernation on the critical battery warning unless it was unable to respond)? Is this a pow... Read more

Read other answers
RELEVANCY SCORE 63.2

Hi! I am new to the forum but I hope that you will help me with my BSOD problem.
Last week I got the first BSOD when I was working and testing VB/macros in Excel, and the laptop (Asus U46S SSD) restarted itself afterwards. The same thing happened this week, but now as it was when coming out of sleep mode the bluescreen came.
From the instructions on how to post the BSOD threads, these are the info files:
Attachment 230449
I apologize that the text in the files are in Norwegian, but I did not manage to change the installed OS language.

Thank you for this lifesaving forum.
Best regards,
Vega

A:BSOD d1 when coming out of sleep mode, + possibl excel. Lapt restarts.

Welcome aboard, Vega.

► Your webcam is somehow behind the crashes.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff8800ac0cf2c, 2, 8, fffff8800ac0cf2c}

Probably caused by : usbvideo.sys ( usbvideo+4f2c )

Followup: MachineOwner
---------
You may either use any third party program to run the cam, or How to Reinstall Usbvideo.Sys | eHow.com is some instructions to reinstall it.

► Another thing is your nvidia display driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8009874a20, fffff8000454b4d8, fffffa8007685cf0}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error... Read more

Read other 9 answers