Over 1 million tech questions and answers.

MAC address not on modem

Q: MAC address not on modem

I have already contacted CISCO and they do not have the MAC address because the modems warranty expired in 2015. I have the Cisco 881 Modem, is it possible to hook it up to my computer to view the MAC address?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: MAC address not on modem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 53.2

Hey everyone.

I've ran into a problem that I can't quite figure out. My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.

Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP
When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'

-Restored my PC to a restore point where the Internet was working

All of these options did not work.

What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.

I'd be glad to prov... Read more

A:'No Internet Access' IP address shows router not the modem IP address

That would be your ISPs' address, the router would probably be 192.168.0.1 or 192.168.1.1 so, in the properties, advanced button for the ipv4 of your adapter, make sure both settings are on auto, and add the correct router address in the gateway box.

Read other 4 answers
RELEVANCY SCORE 52.4

Hi,
I downloaded windows 10 and now my IPV4 DNS server and Modem have the same address. I set DNS and IP to Auto in windows 10 and restarted. it will not change. so I can't stay on internet. can anyone Please Help me. Ethernet hookup

Thank-you
Moose

Read other answers
RELEVANCY SCORE 46

Hello I have recently brought myself an ethernet modem but it came without any instructions and I don't know the IP address it is an Asus AAM 6000EV. I think the IP address is 192.168.1.1 but i'm not sure does this sound right? and is there anything else i need to know? thanks. coastymad.
 

A:What IP address is my modem??

yep modem /router
it should have default of 192 168 1 1
found this quicky thing
http://www.adslguide.org.uk/hardware/reviews/2001/q4/asus_aam6000ev.asp
you will need to change the nic settings
was OS are you running and or do search here lots of stickys on setting up your network card
there may be a reset button on it ,if router is used and does not work properly try resetting
 

Read other 2 answers
RELEVANCY SCORE 46

I recently installed a DSL modem and hooked it up to my Router. Now both of them have firewalls installed, but if i connect to my modem via the 192.168.xx.xx address, all of my computer mac addresses are listed. why would the modem have that information, when the router is the one who should care...

I have static ips set up for each computer and my router set to DHCP. dont ask why, it just works.

But im worried that all someone would have to do is connect to my modem to get to my computers, they can completely bypass my router, as if it's not there :S
 

A:DSL Modem and MAC address

Read other 14 answers
RELEVANCY SCORE 45.6

Okay I have a D-Link DSL G604T Wireless ADSL Router (revision B3), I works fine it works both with the LAN and wireless parts, I am connected via a ethernet cable on the computer I am using currently and my mums iBook is connected via the wireless.

But it wont give my computer an IP address, It was working fine but recently it stopped working, I am not sure what I did to stop it from working.

I tried connecting via my wireless adapter D-Link DWL-G510 (revision C) and then I moved the modem/router into my room and used an ethernet cable and plugged it into my onboard ethernet port, it wouldn't assign me an IP for that connection either.

I don't have a MAC address filter running on the modem, there is no wireless security nothing on the modem side that blocks my computer.

I tried using static IP's for both a wireless connection and using the ethernet, it connects to the modem, and I can access the modem but not the internet. It appears that when using static IP's it isnt routing me to the world wide web.

So It must be something to do with my computer. I tried to do a system restore, but that doesn't work It goes through the process of restoring, then when it restarts it comes up with incomplete restore cannot complete process or something. I tried multiple restore dates to restore to and none worked.

I would just re-install windows and be done with it, but I dont have any means of backing up data that I dont want to loose

Does a... Read more

A:Modem won't assign me an IP address

The router does not assign you an IP. Your computer is supposed to ask for one. Since the iBook is working OK, your router is responding to DHCP requests properly and your coomputer is to blame.

When you set up the static IP configuration, did you fill in all the data correctly? IP, mask, gateway and DNS exactly as on the working client? (The last octet has to be different for the IP address of course.)

Have you removed any malware recently? It could be that the removal program overdid it. Maybe run WinSockFix..

From your PC, post the output of "ipconfig /all" command.
 

Read other 9 answers
RELEVANCY SCORE 45.6

Need some help with a problem that just started. My HP G71 laptop, with Windows 7 Home Premium, will not connect to the internet over the wireless modem I have. Other laptops in the house have no problem in fact, that is how I am typing this right now
I checked the iP address and it starts with 169. The research I have done says that is bad...I am not an expert.

This laptop has been giving me fits lately with malware and I have frequently been running Malwarebytes and other programs to remove. I have tried these things based on a youtube video I watched for this issue.:
1. Went to cmd prompt and tried to release and renew ipconfig. Got this message: "an error occured while releasing interface wireless network connection: The RPC server is unavailable.
2. Went to control panel/network and sharing center/change adapter settings then disabled and enable device
3. Went to properties of device, then uncheck QoS packet scheduler, then went bck in and checked it again
4. Went to services and located DHCP client.It is not listed as being started. When I tried to start it, it said : "Windows
could not start the DHCP client service on local computer. Error 1068: The dependency service or group
failed to start.
5. Tried to restore system to previous point from yesterday...did not work, go an error that said system resotre failed to extract the file C:/Windows\$NtUninstallKB62280$\485945278 from the restore point. the restore point was damaged or deleted.

No luck so far. Any ... Read more

A:Cannot connect to modem, 169 IP address

If you would like help with malware ...

Read Everyone MUST read this BEFORE posting for help in this forum and post the requested information here. When I see that you have posted the information I will move this thread to the Virus & Other Malware Removal forum.

Bump your thread there once a day--no more often--until you get a reply. They're kinda busy over there.
 

Read other 1 answers
RELEVANCY SCORE 45.6

I'm trying to find the correct information. Hooking directly into a modem is it possible to get a 192.xxx. Now I mean a normal modem. Not a modem router combo or some wireless nonsense. A basic wall then modem into a computer connection. Rebooting the computer and power cycling the modem. Using DSL or cable. Is there any way a person would get a 192.xxx ip address or is the person just not being honest and hooked up into a router?
 

A:Can you get a 192.xxx ip address connected into a modem?

Read other 14 answers
RELEVANCY SCORE 45.6

hi there , hows it going?
was down having a look at a friends computer, xp pro sp2, connected via ethernet -cable modem.
no internet connection, there is a physical connection and ive done the usual troubleshooting procedures

went into cmd and done ipconfig/all

his ip address started with a 192 address as did the default gateway etc.....DHCP is on

blinking 'ready' light on the modem itself, but noting lighting up on the 'send', 'receive' lights on the modem.

im with the same provider and my 'ready' light is on constant.

has he been cut off?? hes adament that it is on

where is this 192 ip address comming from?

ive also tried running the installation cd that came with the modem, it cannot find the NTL network and kicks back an error 800
thanks guys

robert.
 

A:modem assigning a 192 address???

Read other 8 answers
RELEVANCY SCORE 45.6

I have Hamachi running on my Vista operating system to have remote access to a desktop with Windows XP. Everything has run fine until today when I had to replace my modem on the Vista operating system that my wireless laptop runs on. Now, I have Hamachi still installed and running and I can see my remote access to the other computer, however my computer is not able to access the information from the other desktop Windows XP, because I have a new modem and do not know how to configure that new modem with the existing Hamachi.

So, my question is how do I set up the new wireless 2 modem to be seen by the Hamachi VPN network that is currently running all the time on my laptop to read the information on my business partner's desktop?
 

Read other answers
RELEVANCY SCORE 44.8

Assuming they are two separate units and not bridged.
When you ping, tracert or DDoS attack or what-have-you my IP address, who/what do you reach ?
Im understanding that a modem is just a media converter. It's got no IP address of its own.
But then Wikipedia states (under "cable modem"): "With respect to the OSI model of network design, a cable modem is both Physical Layer (Layer 1) device and a Data Link Layer (Layer 2) forwarder. As an IP addressable network node, cable modems support functionality at other layers...] ...The Network Layer (Layer 3) is implemented as an IP host in that it has its own IP address used by the network operator to maintain the device."
If it's not the modem's ip address, are they referring to TR-69..?
A scan of an ISP subnet (e.g NMAP) returns/reaches routers or modems?
 

Read other answers
RELEVANCY SCORE 44.8

I have desktop with Windows 98 SE and I am trying to connect to my cable modem using a network card. My computer can't get an IP address from my broadband service so it assigns an autoconfiguration IP address and I can't get on the Internet.

I have tried two different network cards with the same result. I have connected a laptop to the cable modem and it works fine. I have also connected my desktop via USB to the cable modem and it works fine but I need to use Ethernet so that I can eventually use a router. I have tried uninstalling and reinstalling the network card with no luck.

Does anyone have any ideas what could be causing the problem?
 

A:98 SE can't obtain IP address from cable modem

Read other 6 answers
RELEVANCY SCORE 44.8

I've had a great network for years but then my DI-624 died and I replaced it with a D-Link WBR-2310. It conected to the PC just fine and using DHCP it assigns IP's to the compters. The problem is that the Comcast modem will not give the the WAN an IP or DNS. When I check status the LAN has Host, IP and Gateway. When I check status on the WAN these are blank. Thus, I can't get on the internet using the network. I used the same cables I had with the DI-624 if that makes any difference? So, the network works and the router gives IPs but the WAN has nothing coming in. Help?
 

A:No IP Address from Modem to WBR-2310 router

Read other 10 answers
RELEVANCY SCORE 44.8

I can ping 169.136.36.18 when my laptop is connected to the company address but I cannot ping it when I am connected to the Cable Modem at home. I can reach the company network using a VPN with no problem.

How do I fix this?

The OS is Windows 2000
 

A:Cannot Ping IP Address From Cable Modem

I remember something about the 169.xxx.xxx.xxx ip addresses being an internal address that windows uses when it can't resolve the dhcp server sometimes. I had it once with windows 98 when we where having cable problems.

You may need to add another tcp/ip protocol for you nic, configure it to use dhcp for the cable modem.

Try here for some info

http://www.wown.com/j_helmig/w2ktcpip.htm#resource

sorry not running 2k yet, just getting ready to install it for a dual boot
 

Read other 2 answers
RELEVANCY SCORE 44.8

I keep getting booted off the internet every few minutes. My modem has been re-programed by the ISP and I'm still getting a bad ip address according to the isp help desk. I also can't connect to the router setting through 192.168.1.254.

Router - Westell Model 2200 DSL Router

Please Help!!

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Jaylaptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ip3networks.com

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-18-F3-2D-13-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : ip3networks.com
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controlle
r
Physical Address. . . . . . . . . : 00-15-C5-AD-71-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::547b:2d10:3a38:2291%7(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.97(Preferred... Read more

A:Can't connect to Modem settings ip address 12.168.1.254

Read other 13 answers
RELEVANCY SCORE 44.4

Charter up my internet price and told me they would put me on a promo plan if I came in and got one of their modems. I picked up the modem (Cisco DCP3008) yesterday and hooked it up tonight. I had everything connected through my DIR 615 and Charter came up asking me if I was upgrading, etc... needing to verify and so on. I went through that and the last step it said it need to restart the modem to finalize. The modem restarted and came online, however the browser never indicated the processed had finalize. I call Charter, we wired the modem directly to my laptop and got a connection. I thought things were good. I hooked back into the router restarted the modem, all lights came on, started the router and no IP address. I went into setup and clicked clone MAC address and hit save, still no IP address after going to status, dhcp release and dhcp renew.

I reset the router back to factory settings and it still would not pull and IP address. The router worked great before the new modem. Any suggestions to get my router to pull an IP address?

Thank you.
 

A:Solved: DIR 615 will not pull IP Address with new cable modem

Read other 16 answers
RELEVANCY SCORE 44.4

Hello, I am currently trying to figure out how to hook up my Desktop computer to the internet. Recently got back my DSL. The computer is trying to get my IP address from my wireless router, rather than the modem itself. It is also showing 0.0.0.0 I have tried to use system restore to go back to when the computer was working properly, but system restore is not able to restore any points. Any help would be greatly appreciated.

Ryan

A:Computer trying to get up address from router rather than modem. Showing up 0.0.0.0.

IP address, not up address! dang phones auto correct! I talked to CenturyLink, my ISP, they told me to contact HP, contacted HP and they told me they could not help me because the computer was 6 years old. GRRR!

Read other 3 answers
RELEVANCY SCORE 44.4

I can't log into my MODEM. I was able to set it up once using the default gateway IP address about a week ago. Then my kids unplugged it and something changed when plugged back in. When I try to log into my modem using the IP address it just gives me a web page saying its unable to connect. My internet works fine, I am able to ping the address and it replies with no data loss, I can trace route to it, I can release and renew the IP address DHCP server. I am just unable to bring up the webpage to login. I have turned off my firewall (windows firewall). I am just at a loss on what to try next. I want to turn on my Wi-Fi and such, essentially administer my router for my computer. I have did a hard reset, held the button for the recommended 15 seconds with both power on and power off but no change. The modem is a Technicolor TC8717T.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 8189 Mb
Graphics Card: ATI Radeon HD 3800 Series, 512 Mb
Hard Drives: C: 55 GB (17 GB Free); E: 596 GB (587 GB Free);
Motherboard: Intel Corporation, DX48BT2
Antivirus: Microsoft Security Essentials, Enabled and Updated
 

A:Unable to connect to my MODEM via IP Address for setup

Edit: I ran the Microsoft Internet troubleshooter and I used the IP address instead of the domain name and it said "The remote device or resource won't accept the connection". So it seems something within the router is refusing to let me connect, but still acting in the MODEM role.
 

Read other 2 answers
RELEVANCY SCORE 44.4

I need to find the configuration address for an Arris modem. The instructions that I have sya that it should be at the bottem of the modem, listed as an "http." address followed by a series of numbers, but there is no "http" info on th modem. Is there a different way for me to find that number?
 

A:Configuration address for an Arris TM502G modem

http://www.ehow.co.uk/how_6067836_troubleshoot-arris-modem-502g.html

In a browser try the following 192.168.0.1 ; 192.168.1.1 ; 192.168.100.1 ; 192.168.1.100.
so will be http://192.168.0.1 or .2 or 1.1 just keep trying

http://www.arrisi.com/support/guides/500_series.asp
 

Read other 2 answers
RELEVANCY SCORE 44.4

Hi everyone, having a frustrating night getting my ADSL2+ connection going. Just got a Billion 7402G modem/router delivered and I am trying to get it working on an XP PC.

My NIC card works fine, and has the latest drivers. I plug in the modem as described in the manual, and follow all configuration instructions including - Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

But I am not being issued an IP address. The manual says this should just be automatic and has no recourse if it is not.

I set an IP address manually within the range of the router, and was able to logon to the modem via the webgui. But no internet access.
Billion support tells me "You should only need to login to router with default settings, navigate to Quick Start page, enter your ISP login details & apply, router should then connect, when finished save config to flash. Nothing else should be required, computer should automatically connect. Ensure that software firewalls aren't blocking access."

OK, so to do this, I need to put in the manual IP address... why is the manual saying to set my LAN connection to obtain IP and DNS setting automatically,and why is this not working for me? Anyway I change the settings to manual and reboot, try the suggestion. All firewalls are disabled.

I have now manually entered an IP address for my PC that allows me to login to the router. Without doing this I cannot even get to this setup pag... Read more

A:Solved: My ADSL modem is not giving an IP address

Read other 10 answers
RELEVANCY SCORE 44.4

I'm trying to get Ubuntu 8.04 online and to do this I need to know the private IP address of my modem, which is an NEC NTA-3110 ADSL.

The problem is that my network card is detecting a private IP address automatically (169.x.x.x) and this is not quite in the range that I would expect. Normally it is in the 192.168.x.x range. The reason it is doing this is because the router is not offering any private IP addresses.

I've googled extensively. I know this information should be in the documentation or the manual, but the ISP gave me neither. I know I should ask the ISP but they won't have anything to do with Linux. They just tell you to run the Windows set up disk.

If anyone could offer any help on this, I'd appreciate it very much.
 

A:Solved: IP Address of NEC NTA-3110 ADSL modem

Read other 8 answers
RELEVANCY SCORE 44

Please help me!

I can't use my cable modem to access the Internet and can't release my IP address in IP configuration, called custom service and talk with the technical supporter many times, they said there is nothing wrong with my computer setting, and they didn't make any repair or upgrate service in my area, they don't know what happened and can't solve it! <Can you believe that? That's exactly what the guy called technical supporter told me, and they work for earthlink.>

My operation system is WIN98. Please help me!
 

A:HELP! - can't release IP address and can't access Internet through cable modem...

Read other 16 answers
RELEVANCY SCORE 44

Hi all -
we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same.
The error message that I get is that the IP address for the network cannot be found.

I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless.

SOooo - should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router? Or has anyone heard of this and maybe has some light to shed...???
Many thanks
 

A:Cable modem to DLink Router can't find IP address

I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem.Click to expand...

Power cycling the modem is necessary when switching the device connected to it; after that there should be no need to power cycle it until the next switch.

However, the internet still intermittently shuts down,Click to expand...

Implies ISP, modem, cable or computer problem. If you have another Motorola modem you have LEDs that give a pretty good idea of what might be happening. And most modems have some LEDs. What are they telling you on the "shut downs"?

and of course turning off the computer necessitates the whole procedure again.Click to expand...

Shouldn't have to do anything but power up the computer. Can you try another computer? If the modem has a USB port can you try a USB connection?
 

Read other 1 answers
RELEVANCY SCORE 44

Can't connect to Internet, my modem is dishing out a private IP address and suber class b mask. I need to know the regular IP address and mask for Comcast but I have a feeling the modem is crapping out on me.

A:Comcast modem sb5100 giving private IP address.

Is the address 169.254.0.x ?

A view of your IP address (ipcoinfig /all) will help. You might try restarting your modem, or find out if you're getting a dynamic or static address from your ISP.

You could also have a router/modem combo device. Just realized that you posted the model. Its not a combo device.

More information will be needed to actually help you.

One last thing is to make sure that your ISP can contact your modem. You will have to call them to test the connection.

Read other 2 answers
RELEVANCY SCORE 43.2

Okay so I'm trying to connect my Xbox 360 to Live by bridging my computer's wireless connection. I've done this before for a friend in a different city and it worked fine, and I felt very proud of myself for doing so. However when I try to connect here, the modem won't assign my Xbox an IP address. I've been into ipconfig/all and tried to manually assign the same IP address to the Xbox but to no avail. Same deal with the alternate MAC address option. I've been trawling the forums for hours now and I've seen fixes for this exact issue but they haven't worked for me.

I've only got a very basic knowledge of IT and I need help. Who's keen?
To speed things along here's the readout from my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Samsung>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Boyd
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Ethernet adapter Network Bridge:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : 7A-E4-00-60-65-C5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ede7:9101:3c79:356%24(Prefer... Read more

A:Xbox 360 unable to obtain IP address from bridged wireless modem through ethernet

What connections are in the bridge?

It looks to me from your ipconfig /all that you may have an ethernet port connected to the Xbox and some other connection bridged with the wireless.
 

Read other 2 answers
RELEVANCY SCORE 33.6

Windows 2000

I know I have the modem hooked up right, I know the dial up is hooked up right, It keeps saying there is no dial tone so I unchecked the dial tone detection and you could hear the modem dial up right away but it would dial once and then nothing. There is a phone dialer hooked up on this computer will that make a difference if it will dial out or not? there is only one place to plug the RJ11 line in. Most have the phone jack and the line jack this one doesn't. This guy had a bunch of spyware and a few trojans etc on his computer and asked it I would help him. I caught a bunch of stuff but I have to be able to dial up so I can update the programs I am running. Need some suggestions, Thanks The modem is a HCF 56K MCI Modem and like I said it is hooked up right you can query it and it gets answers and no dial tone but unchecking the dial tone detection box you can then hear it dial up but does it once and then nothing. I no the line is good.
 

A:Solved: Windows 2000 SP4- has modem and phone dialer- can't get modem to work- Help

did w2k id it or did you supply the drivers?

2k doesn't like a lot of hardware.
 

Read other 3 answers
RELEVANCY SCORE 33.6

I have solved about every problem just by reading other people's questions (as the rules state).......it has worked every time until now. access violation at address 4003b648 in module rt170.bpl. write of address 0000000d I have not found this, I hope I didn't overlook it...I'm learning a great deal from this forum and I don't want to waste everybody's time...I'm still a newbie and the more I learn, the more I realize that I don't know sh**. Anyway,thanks for your help...this is a great place to learn.

A:access violation at address 4003b648 in module rt170.bpl. write of address 0000000d

Just my guess...Access violation...usually means a RAM/memory error.Address 4003b648 appears to be a memory address.Module rt170.bpl...seems to be part of IE.What's the related error data as reflected in Event Viewer?Take a look: http://www.justanswer.com/questions/uekb-c...running-windowsOne answer by Rick Rogers (helpful MS-MVP) indicated that either updating the SP to the most current or reinstalling IE would be the answer.Louis

Read other 4 answers
RELEVANCY SCORE 33.6

I just got a brand new Vaio and something happened. This message pops out on the screen - Access violation at address 036E0820 in module 'iesdsg.dll' . Read of address 25202E67

Anyone know what is this and how to fix it?
 

Read other answers
RELEVANCY SCORE 33.6

I have a web address that auto completes in my address bar even after I have gone to tools, internet options, clear history, delete cookies, delete temp files.

The address is www.bodymiracleatlanta.com/models03.html

Any suggestions?
 

A:Solved: Internet address won't leave address auto complete history

Read other 15 answers
RELEVANCY SCORE 33.6

The problem was found when I was using the TuneUp DiskCleaner to scan the hard drive labled F (the "File" drive). The scanning was stopped when it reached a folder (a folder that contains html pages that someone sent to me and I saved there), and a error message popped up saying "Access violation at address 019C44F3. Read of address 83C70A78."

I repeated the scanning and the exactly same thing happened -- even the error address reported was the same.

I tried to delete the folder from the explorer window. But everytime after I press the "delete" button, the explorer just breaks down, while that folder remains there the next time I open the explorer. The same thing happens in when I tried to delete it in the safe mode.

Strangely, I was able to rename the folder. It just can't be deleted.

Since everytime the same error address was reported, I assumed there could be some defect with the hard drive. So I launched a thorough scan of the F drive using TuneUp Disk Doctor, which reached the deepest level by checking every 512 bytes sector. The scan took about 20 minutes, but nothing wrong was found.

Can any one help me figure out what's wrong? Thanks.

A:Access violation at address 019C44F3. Read of address 83C70A78.(RESOLVED)

Hi there and welcome to TSF.
First, check the permissions on the folder. Right click on it then select properties. Make sure the folder isn't "read-only". If you still can't delete it, try using the utility MoveonBoot. You can download it from this site.. This allows you to mark the folder for removal next time you reboot.

Read other 9 answers
RELEVANCY SCORE 33.6

I have been unable to insert an address from my Yahoo email address book for some time now and I have decided to ask for help.

All I am doing is opening Yahoo mail and trying to compose a new email to send to someone who is already in my contacts. When I click "to:" or "insert address" my address book shows up. But when I place a check mark and try to "insert checked contacts" I go to this address on a blank page: http://us.mc1612.mail.yahoo.com/mc/kioskHandler

I see that this has been asked before but no one had replied and I can't find the answer doing a search.

Can anyone help?

I have Vista Home Premium 32 using Firefox. The version is the latest version of Firefox but this has happened in many previous versions of Firefox. (I was lazy [or in a hurry] and just typed in the address of the entity to which I was communicating as a work around.)

Thanks
Wayne Margot

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 305250 MB, Free - 214622 MB; H: Total - 238472 MB, Free - 192816 MB;
Motherboard: , C19/MCP51
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Solved: Yahoo email unable to insert address from address book

Concerning my post above: I turned on my older XP computer and I had no problem with inserting an address from the Yahoo! address book.

I compared all my settings in both computers and noticed that I had different settings relating to how pop-ups are handled. XP reminded me that the address book takes the form of a pop-up. On my Vista I had pop-ups opening up (?) in a webpage. That is the page which came up blank. After I have corrected the settings, I no longer have a problem.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi
I would like to hide the address bar but still be able to use the forward and back buttons and some other features.  I have add the rege key to remove nav bar but that removes everything.  Im using this in a citrix xendesktop environment. 
I will deploy a site but don't want the users to navigate to other sites.  For instance go to our intranet site but stop them from going to our firewall gui page. So when they click on links I wont them to be able to go back to the previous page. 
Any ideas?

A:IE 11 Hide Address bar but keep Forward and Back buttons or disable typing in address bar

Hi,
It's designed by default, and we cannot only hide address bar. Thanks for your understanding.
Yolanda Zhu
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 33.6

I am running xp pro. I can not get an internet connection through my ethernet card. When I hook up my modem through usb it works fine but unable to utilize my full download speed capabilities. Hooked the modem up via ethernet to laptop and it worked just fine. The only thing I can find wrong that I don't know how to fix or what is causing it is the fact that the physical address of the card comes up as the broadcast address (FF-FF-FF-FF-FF-FF). Very strange. Can someone please suggest a fix for this (and dont say update the drivers) although it could likely be something as simple that I have overlooked.
 

A:Solved: ethernet card shows broadcast address as physical address

Read other 16 answers
RELEVANCY SCORE 33.6

I am using Outlook 2003 and run Windows XP.

When I create a new message I begin typing the name of the recipient and I would like it to match up with an address I have in my Outlook contact list. However, it does not read from there. It only seems to look at addresses that I have already sent to in the past. How can I get it to read from the address book? If I click on "TO" or "CC" it brings up another window with a list of addresses from my contact list. From there I can have it pull from the list. I would like to be able to do it withot the extra step.

Thanks!
 

A:Solved: Outlook 2003 dowes not automatically pull address from address book for email

That is how autocomplete works, from used addresses stored in the NK2 file.
This explanation and keyboard shortcut might help you.
Where do Outlook's auto-complete suggestions come from?
 

Read other 3 answers
RELEVANCY SCORE 33.6

i have a modem "hsp56 mr"
amd athlon 1800+
if anyones interested this where i got the particular pc
it seemed like a kicka** deal at the time still does regardless
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2053229285&rd=1
anyhoo
i'm using xp pro service pack 1 2002
it seems to have this deal where it take an hour to log on then just sputters out after home page
earthlink advice to update driver . that's been a bit of a problem
as i went to the manufact. website i couldn't find my modem.
yeah i know i'm "disturbed" but if anyone has any ideas that'd one less facit of technology i 'd no longer be ignorant of
 

A:hsp56 mr modem need driver xp modem website stupid jerks

Try the link below for your driver for xp.

http://www.windowsxp-drivers.com/drivers/50/50274.htm
 

Read other 1 answers
RELEVANCY SCORE 33.6

Just moved in and brought my ADSL wifi modem Belkin F1PI241EGau with me, but over here there is cable and the provider supplied me with their modem motorola Surfboard SB5101E. I would like to connect these two to use the wifi. Would that be possible?

Thank you
 

A:Can i connect my adsl2/2+ wifi modem/router to cable modem?

Not really. The ADSL router doesn't have the correct WAN interface. You need a standard router with an Ethernet WAN connection.
 

Read other 3 answers
RELEVANCY SCORE 33.6

Morning everybody!
Okay... I recently got Cable Connection Internet (lan)..with the external modem...that has (NIC) connection and (USB) in the back....My other computer which sits right next to my dell is down right now, and i don't have a hub or another ethernet cable at this moment, but eventually both computers are gonna be connected one into the other and that one into the internet...I don't really know if I'm supossed to bridge or not, since other one is down and i cannot use wizard to set up on this one...BUT I was reading on the different connection types and there one that says home phoneline network using an internal modem, DSL, or cable modem....can I connect a basic phone line from internal 56K modem into the other (computer thats down) Internal 56K? or use the extra USB connection from external cable modem and connect that way?.I'd like to go into other computer and see whats going on..
 

A:home phoneline network using an internal modem, DSL, or cable modem.

Read other 7 answers
RELEVANCY SCORE 33.6

Windows 2000 pro

Just put this operation system on and it won't find a driver for the modem. It had windows 98SE on it and put windows 2000 pro reset it to NTFS and got the system going etc. I took the modem out. It isn't in a pci or isa slot it looks like a miniture APG Slot. A little brown slot above the pci slots looks only a couple of inches long. If anyone knows what you call that slot I would like to know. Anyway All it says on the modem is this

AMR 2002/16
MODEL fb pctel AMR
Cyber Solutions Corporation

Any help would be great. Thanks
 

A:Solved: windows 2000 pro- driver for a modem-never heard of this modem-help

Read other 8 answers
RELEVANCY SCORE 33.6

I am attempting to configure PC-Alarm and Security System. Part of this program allows for notifying me via cell phone if one or more of the residence smoke alarms have gone off, alarms for the doors, or someone is attempting to gain access to our home computer. The test fails because it needs a modem supporting voice communications. I am not sure whether our modem does, or does not support voice communications. I do know that our present modem is>PCTEL 2304WT V.9x MDC Modem.

We operate an Inspiron 8200 w/XP.

Sincerely,

The Gillette Family (Ron)
 

A:PCTEL 2304WT v.9x MDC Modem/Does this>Modem supports voice communications?

According to this document on the Dell website their PCTel modem does not have voice capability, unfortunately:

http://docs.us.dell.com/support/edocs/comm/r35323/en/intro.htm

I've being carrying out a search for alternative drivers to provide voice capability for the PCTel modem in my Inspiron 8500 but so far no luck. Some more information on this website:

http://www.modemsite.com/56k/pctel.asp

Brendan Mullan
 

Read other 2 answers
RELEVANCY SCORE 33.6

My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.

In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there any way to do this? Is there a way to disable the modem in the SBG901?

Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection. I am using Windows 7.

Thanks!
 

A:(Comcast) Connect Modem To Wireless Router/Modem Combo!

Is there any way to do this? Is there a way to disable the modem in the SBG901?Click to expand...

Perhaps a really skilled electronics engineer or technician could take it apart, separate the modem from the router portion and add an ethernet WAN port.
 

Read other 2 answers
RELEVANCY SCORE 33.6

I have searched high and low for an answer and am at a loss as to how to fix this issue. I have a u300 modem that with smart view or just drivers seems to work fine directly hooked to my computers. However when try to attach to the cradlepoint router it recognizes the modem however it shows it as off line and network miss configured.

Both modem and router have up to date firmware. I have used 3 different ctr500 routers with the same result. And yes it is compatible according to cradlepoint. And yes I have tried to connect another usb device that a friend had and it connected with no problems.

My service provider is melinicom who is a reseller for the sprint network and yes the device is a sprint franklin u300 device

Any help is greatly appreciated.
 

Read other answers
RELEVANCY SCORE 33.2

In the past I've maintained my address book using the built-in Address Book utility that came with Windows. Once each year, I would import my Address Book (.WAB) file into Outlook 2003/XP. (I don't use Outlook for email.) Then I would use the Mail Merge feature in Word 2003/XP to make and print address labels on standard Avery label sheets to simplify address of my Christmas cards.

Since I'm now using Windows 7, and the familiar Address Book utility is no longer available, how can I print my address labels? I have both Windows Address Book (.WAB) and Comma-Separated Values (.CSV) files that contain my address book data. So, I guess I need to know two things:
Which program or utility (preferably free) can I use to print my address labels.
How do I import my address data into that program?

If it helps, I am already a user of Gmail and Google Drive. Thanks.
 

A:Solved: Address Label Printing without Windows Address Book

Hi Jim,
Assuming you still have Microsoft Office (any version) you can use the Word mail merge feature and use your .csv file as your data source - no other programs necessary. What version of Office are you using?
 

Read other 3 answers
RELEVANCY SCORE 33.2

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:14:35 PM, on 10/30/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\PDF Complete\pdfsty.exe
C:\Program Files\Hewlett-Packard\HP ProtectTools Security Manager\PTHOSTTR.EXE
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe
C:\WINDOWS\system32\igfxsrvc.exe
C:\WINDOWS\SMINST\Scheduler.exe
C:\Program Files\Hp\HP Software Update\HPWuSchd2.exe
C:\WINDOWS\system32\AccelerometerSt.exe
C:\Program Files\Lightspeed Systems\SecurityAgent\satray.exe
C:\Program Files\Common Files\LightScribe\LightScribeControlPanel.exe
C:\WINDOWS\system32\ctfmon.exe
C:\program files\WIDCOMM\Bluetooth Software\BTTray.exe
C:\Program Files\Hewlett-Packard\IAM\bin\asg... Read more

A:Help. Virus sending spam through my email to every address in address book. Log help

Hello and welcome to TSF

Please follow the instruction outlined in our sticky entitled http://www.techsupportforum.com/secu...oval-help.html

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

If there is no response to this post within 72hrs, this thread will be closed.

Read other 2 answers
RELEVANCY SCORE 33.2

Hi,
I have a problem for over a week now that when I type a certain website in URL address bar it directs me to a different website.
I tried looking at the lmhosts - seems ok.

I also tried going back to a restore point of a time when I didnt have the problem, didnt help.

I would thank you very much for trying to advice me.

Best,
Sefi

A:typing web address brings me to a diiferent address in explore and mozilla

There are a few reasons for this.

First sometimes the site you are looking to visit isa "front" site and is for the most part fake. It is created to get search engines to list it high on the list of returned results.
When you try to use the search link to go to the site you get redirected to the site the creators/owners actually want you to visit. There are various reasons they may want this, but I will not go into the why for now other than to tell you it usually involves visitor counts and or subscriptions translating into money.

Second this is a common symptom of maleware/spyware.
It is also a redirect to a website they are hoping if you see it enough you will get interested and pay to join.
It may have installed as a legit program without your permission.
This would be why the restore did not work.

There are other reasons, but I will only deal with these first as they are the two most common.

If it is only happening on one site I would just forget about that site as it is a lost cause.
If it is happening on more than one site then I would run a few good spyware scans and at least one good anti-virus scan if not more than one to make sure you "catch" it if that is in fact what is wrong.

If you do not already have them I would reccomend installing

spywareblaster http://www.javacoolsoftware.com/sbdownload_setup.html
spybot s&d http://www.safer-networking.org/index2.html
ad-aware se http://www.lavasoft.... Read more

Read other 1 answers
RELEVANCY SCORE 33.2

DDS (Ver_09-02-01.01) - NTFSx86 Run by Jordzgy at 12:57:04.56 on Thu 03/05/2009Internet Explorer: 6.0.2900.2180 BrowserJavaVersion: 1.6.0_11Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.766.417 [GMT -8:00]AV: avast! antivirus 4.8.1335 [VPS 090305-0] *On-access scanning enabled* (Updated)============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\Program Files\Alwil Software\Avast4\aswUpdSv.exeC:\Program Files\Alwil Software\Avast4\ashServ.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\WINDOWS\system32\nvsvc32.exeC:\Program Files\Alwil Software\Avast4\ashMaiSv.exeC:\Program Files\Alwil Software\Avast4\ashWebSv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\wscntfy.exeC:\WINDOWS\system32\RUNDLL32.EXEC:\WINDOWS\RTHDCPL.EXEC:\Program Files\Java\jre6\bin\jusched.exeC:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exeC:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exeC:\Program Files\DNA\btdna.exeC:\Program Files\WinZip\WZQKPICK.EXEC:\Program Files\Yahoo!\Messenger\ymsgr_tray.exeC:\Program Files\Mozilla Firefox\firefox.exeC:\Documents and Settings\Jordzgy\Desktop\dds.scr============== Pseudo HJT Report ===============uStart Page = hxxp://www.google.com/uURLSearchHooks: Yahoo! Toolbar: {ef99bd32-c1fb-11d2-892f-0090271d4f88} - c:\progra~1\yahoo!\companion\installs\cpn\yt.dllBHO: &Yahoo! Toolbar Helper: {02478d38-c3f9-4efb-9b51-7695eca05670} -... Read more

A:access violation at address 00409942. Write of address 00401000

Hello. I am PropagandaPanda (Panda or PP for short), and I will be helping you.Download and Run OTListItPlease download OTListIt by OldTimer to your desktop.Open OTListIt by double clicking its icon. If you are using Windows Vista, right click OTListIt2.exe and select Run As Administrator.Click Run Scan without changing any settings. When the scan is complete, a logfile will open.Copy the contents of the log into your next reply. It will be saved as OTListIt.txt where OTListIt.exe is located.Download and Run Scan with GMERWe will use GMER to scan for rootkits.Please download GMER.zip to your desktop from any of the links below:LINK1, LINK2Right click on GMER.zip and select "Extract All".Close all other open programs as there is a slight chance your computer will crash.Double click GMER.exe. If you are using Windows Vista, right click the icon and select "Run as Administrator". Your security programs may detect GMER's driver trying to load. Allow it.You may see a warning saying "GMER has detected rootkit activity". If so, select NO.Leaving the settings at default, click Scan.When the scan is complete, click Save and save the log onto your desktop.Please include the log in your next reply.Please tell me what changes have been made to the computer since your topic was started. Also give me an update on any symptoms.With Regards,The Panda

Read other 2 answers
RELEVANCY SCORE 33.2

How do I find a form in my 95 programme thats easy to make an address book??? in simple terms please
 

A:Making a client address db, w/posting address's from an old index file

Read other 7 answers