Over 1 million tech questions and answers.

SD host adapter not recognizing media

Q: SD host adapter not recognizing media

Hello
Would someone possibly know whymy sd host adapter works intermittently and only wone of 4 of my sd cards?

Thank you
Douglass

RELEVANCY SCORE 200
Preferred Solution: SD host adapter not recognizing media

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: SD host adapter not recognizing media

you could try to update the driver. First try in Device Manager and if that doesn't work try going to your adapter manufacture's site for an updated driver. Ask if you don't know how to do that,someone will talk you through it.

Read other 1 answers
RELEVANCY SCORE 59.6

I just installed windows 8.1 pro on an MSI z97 pc mate motherboard with I5 3.3 ghz processor, 16 gb ddr3 1600 MHz ram, with embedded realtek pcie gbe NIC. I checked and found that hardware virtualization is enabled by default in the BIOS.

I tried to set up a virtual switch using the latest bios and drivers from MSI. I created a virtual switch choosing the external option and the share with host OS option. I then connected to the VM. No network connectivity on VM but host still worked.

I then used autopatcher to update windows 8.1 on the vm. I removed and reinstalled the virtual switch choosing external option and share with host OS option. Same conditions occurred.
And then I installed the latest NIC driver. Same problem - media disconnected.

I tried this process with the latest driver from the realtek website which was a couple years more up to date. I had such high hopes! Same problem.

I then used msconfig to prevent all non-Microsoft services from starting and rebooted. I removed and recreated the switch and I was still hoping for success. Same exact conditions occurred.

These are the conditions that occur whenever an external switch with host os sharing enabled is installed in between all of these troubleshooting steps. It looks exactly the same every time...
The host machine can still access the network but it does so through the virtual switch. Ipconfig /all on the host reveals the following...
Microsoft Windows [Version 6.3.9600]
(c) 2013 M... Read more

Read other answers
RELEVANCY SCORE 54.4

My outlook express has suddenly stopped recognizing my e-mail host. It spits back an error message "the host "mail.optonline.net cannot be found Socket error11001 and error number 0x800CCC0D." I do not have norton installed, I use Mcafee Virus and firewall software. It gives me the same error message when I disable my firewall and virus software. I don't know what else it could be.
 

A:outlook express problem recognizing host

Read other 9 answers
RELEVANCY SCORE 51.6

So, I recently acquired an HP EliteBook Folio 9480m. Went through the Windows and driver updates, the usual new PC setup, and then I noticed at the bottom it said "6% and not charging". So, I go through all the troubleshooting including all the various troubleshooting recommended in forums, uninstalling drivers, running HP support assist, etc, verified that the battery and AC adapter were both working with another laptop of the same model from work, and nothing.

HP's diagnostics say that the AC adapter is not working, Windows says that the battery is not charging. The only thing left that was suggested elsewhere to do is update the BIOS, which I can't do because the laptop won't recognize the AC adapter.

Any ideas?

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Enterprise, 64 bit
Processor: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 8073 Mb
Graphics Card: Intel(R) HD Graphics Family, 1024 Mb
Hard Drives: C: 237 GB (143 GB Free);
Motherboard: Hewlett-Packard, 22DA
Antivirus: Windows Defender, Disabled (ESET is installed and enabled)
 

Read other answers
RELEVANCY SCORE 51.6

Every time I turn on my Dell Inspiron N5010 laptop, I get the following message:
"The AC adapter wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. Please connect a Dell 65W AC adapter or greater for the best system performance."
I don't know why I am getting this message since:
- I am using the 65W Dell AC adapter that came with the laptop- The adapter is charging the battery properly- The green light on the adapter stays on all the time when in use- The port connection is fine
So, other than this annoying error message, everything seems to be working fine. Should I just ignore it ?  If not, what else do you recommend I do ?

A:PC not recognizing AC adapter although it is working well.

Hi lsavinon,
Welcome to the Community,
Since you're conforming the battery is charging fine and Adapter light always stays on,try going to BIOS (Tap F2 at start up),check under the Main screen if AC adapter is getting detected normally(if it shows 65 watt adapter).
If it shows 65 watt and if you want to get rid of that error message on start up,in BIOS go to Advanced tab,find Adapter warning and disable it.
Note:Once you disable this setting for adapter warning,in future if there is a real problem with the adapter,system will not warn you about any such problem.
Thank You

Read other 44 answers
RELEVANCY SCORE 51.6

My hp computer is not recognizing any network adapters. Im running windows 7.

A:not recognizing network adapter

moved to network forum

can we see an ipconfig /all and device manager

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------



------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with th... Read more

Read other 14 answers
RELEVANCY SCORE 51.2

Hi. I recently installed 8 as a dual boot option. Everything looks to be working quite well, except that when i go to settings-wireless, it says no wireless devices and wont recognize any wifi networks. I try to go through troubleshooting but it does not help at all, and remains unable to find any networks. Im guessing it is a driver problem, but i couldn't find and drivers to fix this. I have a Toshiba satellite L775, everything works fine in Win 7. Thanks!

A:Win 8 CP not recognizing my built in wireless adapter HELP

Hi there.

Toshiba should have a Windows 7 driver to install.

If not, in device manager, right click then choose Properties. Details tab. Change dropdown to say hardware ids. Copy/paste the results here (no screenshots instead of copy/paste, please.)

32 or 64 bit?

Read other 5 answers
RELEVANCY SCORE 51.2

Hey guys,

Just installed Windows 10 on a new hard drive. Everything seems to have installed just fine, but when windows finally boots up, it doesn't recognize my wireless adapter so it doesn't show my home network to connect to. Wiring it directly into my PC isn't an option since it's too far. Any suggestions?

Thanks.

A:Windows 10 not recognizing wireless adapter?

Start>Search>Network Problems>it will run Identify and repair network problems.
If N/G try unplugging router for a minute and restarting.

Read other 3 answers
RELEVANCY SCORE 51.2

Hi TSF

Last week I put together a computer. This is my third, and the first two work well. This one works almost perfectly; however, there is one error that I can't seem to get around.

Windows is having issues connecting to the network. I have a functioning ethernet cable plugged in, but it isn't recognized. When I try to diagnose the problem, I get the following error:

"Windows did not detect a properly installed network adapter driver."

When I look at the device manager, the 'Network adapters' node is gone, making most of the solutions I've seen for this problem useless...

My mobo: ASRock h61m/u3s3
LAN driver I downloaded:
ASRock > Products > Motherboard > H61M/U3S3 > Download
(Atheros Lan driver ver:1.0.0.45)
OS: Win7/64 bit

I'll post other specs if needed.

Thanks in advance for any help. I know next to nothing about networking, so problems like this tend to scare me

A:Windows not recognizing network adapter

By chance is the Adapter disabled in the BIOS? Have you tried "searching for New Hardware".

Read other 18 answers
RELEVANCY SCORE 51.2

My Toshiba Satellite A300 is having the following problem:

- When the laptop is turned OFF, the computer recognizes the AC adapter and charges the battery.
- When the laptop is turned ON, the computer DOES NOT recognize the AC adapter. It uses the battery until its depletion.
I'm only able to charge the battery with the laptop turned off. I've already tried several AC adapters and the same symtoms persist.
What could this be?
 

A:Toshiba not recognizing AC adapter when turned on...

Will the laptop power up with just the AC adapter, (battery removed)?????
 

Read other 2 answers
RELEVANCY SCORE 51.2

Hey all,
I've been running windows 7 pro 64 bit for just under a year now. Couple days ago the computer was on just sitting idle while i was around the house, then i noticed this message pop-up the windows firewall was not active and if i wanted to activate it, ever since then i have not been able to get the computer to recognize any sort of internet connection. Im on a wired connection to a wireless router (D-Link Xtreme-N Dual Band Gigbit), all other computers connected to the router work fine.

there is a red cross in the little network icon in the taskbar.

If I click that icon, it says ?No connections available?

If I click troubleshoot, it says ?Problems found - There might be a problem with the driver for the local area connection adapter?

If I look in the device manager, there IS an entry for ?Network Adapters?, in fact there are two:
1) Realtek PCIe GBE family controller (which i recognize as the one from my motherboard Asus P7P55D-E Pro
2) WAN Miniport (PPPOE) [i have no idea where this comes from, but it has a yellow exclamation sign above it]

I have uninstalled 1) from the device manager and let windows re-install it on reboot, i tried installing drivers from the CD the mobo came with, i tried going on another computer and getting updated drivers from the Realtek website, none of them worked.

if i try to uninstall the WAN miniport it does not disappear??

If I look in BIOS the contorller is there and ON.

Reboot, swapping ethernet cables, restarting... Read more

A:Help! windows7 not recognizing LAN Adapter/controller

Welcome to Seven Forums,

Have you also tried a different patch network cable? or move it to a different LAN Port of your router?

If you have a separate Modem, have you tried plugging it straight to the Modem bypassing the router?

If that didn't help at all please provide an ipconfig /all output while your computer is connected to the router.
Click on the Start Menu search box area type cmd, right click on cmd see at the top, and click on Run as Administrator. From the command prompt (black screen), Copy and Paste these ipconfig /all >c:\ipconfig.txt . Please attach the .txt file to be found in your Local Disk 'C' on your next post.

Read other 1 answers
RELEVANCY SCORE 51.2

Hi,

I am having problems connecting to a public, security-disabled access point in my school.

I am running on windows XP Pro SP3, I have an Intel Pro/Wireless 2200 BG Network card.
Windows Zero Utility keeps omitting the specifi AP I want to connect to (It doesn't list it). Every other computer in the room detects and connects to it. My PC detects all other APs that I know of.

I have also tried using the Intel PROSet/Wireless software and got the same results.

How can I fix this? Any help is greatly appreciated.

Addisu
 

Read other answers
RELEVANCY SCORE 50.4

This problem appear at all Dell models...from our experience specially after a dc power jack replacement the laptop doesn't recognize the batery or AC-DC adapter...we try reseting the bios by removing the CMOS batery, didn't fix it...the only fix we found so far it's a replacement ac adapter or battery...it worked in all cases...the place to buy it...the cheaper but not the safer...ebay...buy it on your risk...if further solution found pls reply back or place an inquire at www.nydatapc.com
 

A:Dell laptop not recognizing AC-DC adapter or battery

power adapter lead gone off when pug in the laptop but the laptop wont turn on. dell d 610. what do i do pls.
 

Read other 1 answers
RELEVANCY SCORE 50.4

I have a Latitude E5550  running Windows 7 which is having this problem.  It has operated just fine since Feb 2015 when I bought it, until within the last 3 weeks when I got:
"The AC adapter wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. Please connect a Dell 65W AC adapter or greater for the best system performance."
At boot time, I get
"The AC power adapter wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. Please connect a Dell 65W AC adapter or greater for the best system performance. Strike the F3 key (before F1 or F2 key) if you do not want to see this power warning message again. Strike the F1 key to continue, F2 to run the setup utility."
The battery icon in the System tray shows "not charging" and a level of 94%.
The adapter for this laptop model does not have a status light.
NOTICE: This has happened twice. The first time I had the laptop  plugged into the AC adapter that came with it.  When it blew, I bought a new one from Dell. 
When I bought the new adapter, I swapped in each of the three sections one at a time.  I kept getting this message, until I swapped in the part that plugs into the surge protector on one end (with the ground pin) and into the adapter on the other end.  (the o... Read more

A:Latitude laptop not recognizing AC adapter, not charging

This is not a firmware problem.  A BIOS update won't fix it.
If you've already tried a new OEM Dell (not a third party) adapter to no effect, the next part to replace is the DC jack in the system:
www.parts-people.com/index.php
If that doesn't solve the problem, replace the mainboard.

Read other 1 answers
RELEVANCY SCORE 50.4

My Dell Inspiron 1501 (out of warranty and running XP Pro if that matters) has stopped recognizing the AC adapter. The adapter is a recent genuine Dell replacement for an older one that would no longer charge the battery, the second one I had had to replace because of the "AC adapter not recognized" error. It worked fine for a few weeks, and its green LED still goes on when plugged into the outlet, but now the icon in the system tray is the battery icon, not the AC icon, and the remaining battery time keeps decreasing. There is no error message; it just acts as if the AC adapter isn't there. The plug feels wobbly in the socket, so something is loose.

Googling around for information suggests that depending on what's wrong, it could be fixed with a bit of soldering, or the motherboard may need to be replaced (i.e., time to get a new computer). I've done minor repairs inside desktops, swapping out memory, drives, etc., but nothing that involved soldering. I'm also considering getting a spare battery and an external charger and swapping between batteries to keep it running -- it's a decent machine apart from its power problems and I'd rather not have to replace it just yet.

Questions:
- How can I tell whether the socket can just be re-soldered or the motherboard really would need to be replaced for the AC adapter to be recognized again?
- If it may be relatively simple to fix, are instructions available online? Pictures or diagrams would ... Read more

A:Dell Inspiron 1501 not recognizing AC adapter

Read other 11 answers
RELEVANCY SCORE 50

Help!  My Lenovo Yoga 3 14 is no longer accepting the charge from my power adapter. And, naturally, it could not have come at a more inconvenient time. When I unplug and plug it back in, it gives me the following message in the lower right-hand corner:"USB device not recognizedThe last USB device you connected to this computer malfunctioned, and Windows does not recognize it." When I click for details, it gives me this:"The last usb device you connected to this computer malfunctioned, and Windows does not recognize it. Try reconnecting the device. If Windows still does not recognize it, your device may not be working properly." Except this isn't just any USB device - it's the ever-loving power adapter for this thing! I've tried everything and I'm at my wit's end. Any help? 

A:Lenovo Yoga 3 14 No Longer Recognizing Power Adapter (USB)

I am having the same issue with my Yoga 900 13. Were you able to figure this out?

Read other 1 answers
RELEVANCY SCORE 50

Hello,

I have purchased two PCI Network Adapters and for each I have received a "The device is not configured correctly (Code 1)" error in Vista's Device Manager when trying to manually locate and add the drivers, either from the software accompanying the adapters or from the companies websites (I have tried products from Linksys and Belkin). After hours on the phone with tech support ppl, who were conviced the software I got was corrupt--not true-- I think it might be best to install a new OS (revert back to XP) because I want results.

Has anyone been able to find a way out of this predicament in VISTA?

Please note I have tried the basics, i.e. going to Device Manager and trying to search for the drivers or manually add them from software or company's website. No matter what I do, I get an error message indicating that the drivers can't be found - even if I have "browsed" to them!

Thanks very much all
 

A:PCI Network Adapter problem in Vista - Not recognizing drivers

When browsing for them make sure "Include Sub-Folders" is ticked and search "C:\". That might give you a much better chance of locating them. As for Internet locating you can't really change how it scans for that. Maybe a disk came with your hardware containing the Adapter's Drivers.
 

Read other 1 answers
RELEVANCY SCORE 50

Hey hows it going? My problem with my computer is that under device manager my ethernet, USB controllers and wireless adapter appear w/o their drivers. I never had this issue before. But funnily enough, I everything is fine except for my wireless adapter. Windows cannot recognize it and so I can't install the drivers for it. This just started happening a couple of days ago but I don't really have any clue why. All I can think of is there is a virus going round.

So far all I can think of is doing a fresh install of windows.

Anything else that might see the end to this madness?

Thanks

A:Issues with devices; (error 28) not recognizing wireless adapter

Well without you knowing what brand your pc is, it is impossible to help you....

Use speccy to gather information:

Speccy - Advanced System Information Tool

Read other 1 answers
RELEVANCY SCORE 49.6

I run a laptop and projector for my church. We have a Sony VAIO AR520 powerhouse media laptop with Windows Vista. It was originally hooked up through the corresponding HDMI port to our VPL-AW15 Sony Projector but sony has replaced the port once and it quit again. We switched to the vga hookup but because it is analog and not digital, it won't allow us to play our church videos. We bought a UGA adapter usb 2. When we hook up the HDMI adapter and change the VPL-AW15 Sony projector back to the hdmi screen, the projector doesn't talk to the laptop and switch the NVIDIA to a dual screen. I am not able to manually switch it to a dual screen, thus we have no picture on the projector. Before the HDMI port went bad, all we had to do was turn on the projector first and then switch on the laptop and it automatically detected the dual setting and brought up the dual screen for our media shout programming. I have exhausted all the things I know to try so if anyone has ideas please I can use the help. Thanks in advance and God Bless!
 

Read other answers
RELEVANCY SCORE 49.6

Hey everyone,
First of all I need to say thanks for this web-page, it has helped me out in the past but this time I cant seem to find a solution to the problem that I am having. I cant connect to the internet on my laptop but on my other one I can with no problems. However my computer says it has local and internet connection. I am semi framiliar with the way things are done on this forum so here is hopefully enough information

Modem:
Motorola Surfboard sbv5120
All lights are on including online

Router:
Netgear wireless g router wgr614v10
Blue internet light lit
Also the computer I am currently using is connected to internet via that router.

Laptop with issues:
Toshiba Satellite a305
Running windows vista home premium service pack 1

I have run ipconfig and here is the copy of that

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Owner>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN
Physical Address. . . . . . . . . : 00-1F-3B-73-64-CD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::e9ad:ce... Read more

Read other answers
RELEVANCY SCORE 48.8

The internet connectivity works only wirelessly.  The direct connectivity (connecting the laptor with Cisco Router using a chord) works for sometime and goes off, and WiFi takes over.
Sounds like Dell has solution to this problem.  They tried all usual commonsense ideas and also changed the motherboard, but finally gave up or left it to fate.  There is no problem with Cisco EA3500 dual band router as I have other gadgets connected.  Tried with another another laptop (also Dell), changed chord, tried different slots in the router.
Dell 15 laptop is still covered under warranty.  
Can't Dell fix this problem?
Anyone has experienced this problem and still living with it without Dell taking initiatives to resolve?
thanks,
Shankar

A:Dell 15 7000 series Win10 Laptop not recognizing the ethernet adapter

Hello Shankar,

Please share the exact model number for the laptop. There is an option to disable the wifi when an an ethernet cord is connected to the system. Ideally this option would be there in the BIOS setup. I can get our database if you can share the exact model number. 

Read other 1 answers
RELEVANCY SCORE 48.8

Hello all,

Ive got a really annoying problem with my dvd+rw drive. Maybe its due to the fact I got it under 100 dollars but i dunno(advertised as ULTRA DVD+RW 4x4x12, But im pretty sure it is a BenQ).

Initially it was working fine. But for some reason it decided to not work. It does even recognize any type of disc I put in. Neither CDs nor DVDs. The drive light blinks for a few seconds and then goes away. Some dvds I put in the drive gets kind of loud with the light blinking. This problem is really annoying.

Its wierd too, cuz with other drives, when there is no disc inserted, when double clicked it will tell you to "please insert a disc in drive ...". However, with this dvd+rw drive of mine, it simply opens as if there is a disk inserted (obviously with an empty folder)....

Please help....Ive tried everything
Any suggestions are greatly appreciated
 

A:ATAPI DVD+RW not recognizing any media

sorry I meant:

"It does'nt even recognize any type of disc I put in. Neither CDs nor DVDs."
 

Read other 3 answers
RELEVANCY SCORE 48.8

I've reinstalled everything I can think of and moved jumpers, to no avail. Power is there, the ribbon is in the right place. The drawer opens and spins the cd around for a bit, then spits it right out. When I click on the CD in My Computer, it keeps asking to place a CD in the drive, even though there might be one in there. It's a BDV 212B-if that means anything. Thanks!
 

A:DVD Player not recognizing any media

Read other 6 answers
RELEVANCY SCORE 48.8

My brother has a Dell laptop. It is recognizing external usb devices, but not the media. His card reader shows up as different storage devices but he can't view anything on a memory card. The printer shows up, but he cannot print. He also gets an error when he turns on the pc.

mcshell.exe - bad image
C:/windows/nesetupm.exe.manifest is not a valid Windows image
Please check this against your installation diskette.

Any ideas would be appreciated...
 

A:USB device not recognizing media

Read other 14 answers
RELEVANCY SCORE 48.8

I have a TS H552B samsung CD/DVDW drive. For some reason beyond my comprehension it is not recognizing blank dvd disks. It thinks they are CD's Please Help?
ken
 

A:DVD Drive not recognizing dvd media

My guess would be that you have poor media there. Is it name brand or "Supermarket Special"? If the latter, get hold of something decent like Verbatim and see whether that's visible.
 

Read other 1 answers
RELEVANCY SCORE 48.8

I have an old HP NC6000 which I installed Windows 7 on. I can not get the SD card slot to work. At first it wouldn't see anything when I put a card in. After installing and un- installing several drivers from HP and Microsoft, now when I put a card in it shows up as being able to eject it If I want to. It does not show up in my computer as removable storage or any thing. I noticed in devise manager there is no SD host adapter listed. There is not even a heading for SD host adapter. The card works on my other laptop which is an NC6400. Do I need to install An SD host adapter?
 

A:Missing SD host adapter

"I have an old HP NC6000 which I installed Windows 7"...

There is probably no Windows 7 SD host adapter driver for this old laptop. Stick with XP
 

Read other 1 answers
RELEVANCY SCORE 48.4

I'm trying to burn some songs to a CD that are downloaded in my library. These are songs that I ripped from another CD. For some reason when I click on the burn tab it tells me to connect a CD burner. I know its working because I recently used it to do things from Itunes. Also today when I tried to open an email that was a video it told me to download media player. When I checked for updates it said it was fine.

Thanks
 

Read other answers
RELEVANCY SCORE 48.4

Roxio software recognizes cd burner and burns cd's without a problem. Windows Media Player 11 does not recognize the burner, hence I cannot burn cds with WMP. Windows XP Dell with both a CD burner and a DVD burner installed. What is up?
 

A:Media Player 11 not recognizing CD burner

I am having the same problem with my burner; i think it has something to do with SP2
It is claiming to be a CD-Rom [read only] and Media player is refusing to cooperate with it
i am using a Hl-Dt-ST CD-RW GCE-8483B
I'll let you know ASAP what i find out
[i am on a rampage; CD burning is part of my business >_<
 

Read other 2 answers
RELEVANCY SCORE 48.4

Hello. My 1300a dvd burner has stopped recognizing dvd media. Windows 98 now sees this drive as cd-rom only. This drive has worked fine for nearly two years without a problem. The other day I tried making a copy of my kids' Dora The Explorer dvd. But having them run around me and bumping into me, I accidently started two instances of CloneDVD, versions 1398 and 2094. After that, the dvd drive got amnesia and no longer remembered how to read dvd media. I uninstalled both versions, physically disconnecting the drive from my pc, reinstalling Windows 98, and upgrading the 1300a's firmware -- still the problem persists. Ironically, the drive has no problems with cd media. Any suggestions would be appreciated. Thank you.
 

A:NEC ND-1300A DVD+-RW Stopped Recognizing DVD Media

Could be the dvd laser len.

I have had a sony cd burner that stopped writing due to lack of power. Try yours in another PC.
 

Read other 1 answers
RELEVANCY SCORE 48.4

I'm running Windows XP SP 2. On my PC, I've got four USB ports in the back and two in the front. At first, I connected an iPod to the front ports and all was well, but later it stopped connecting, though it would still charge slowly. When I tried the ports in the back, it connected, but then stopped (though it still charged).

I've got a Creative player also, and the ports worked long enough for me to install all the wares for it. But I've been having the same problems with it recently. The bubble occasionally tells me it detected new hardware (even though it's not new), then say it malfunctioned, but it usually just tells me the device has malfunctioned and to reconnect it.

Of course, I have no problem connecting these players to a different computer.

I've also got two other things (station for wireless keyboard/mouse and the printer) plugged in to the rear ports, and they work fine.

Any ideas? And thanks.
 

A:Windows not recognizing media players

am i to assume u have an ipod? if so theres only 2 programs i know that will make an ipod work correctly. one is itunes/quicktime player which im not a fan of or a program u can purchase called dopisp by mgtek. it works wonderfully with windows media player 11. which is the latest version for windows xp. hope this helps u.
 

Read other 2 answers
RELEVANCY SCORE 48

I was scanning some documents into Adobe Photoshop two nights ago using a scsi scanner and all was working fine, I installed a USB printer that same night then after testing it and was sure all was working I shutdown, but the next night when I went back into adobe photoshop to continue scanning I just get an error message saying;

"error scanner not ready! there does not seem to be a scanner installed. Please check the scsi connection and the scsi Id number"

The scsi Id is "7" and the scanner is a Blackwidow, I think made by Devcom, the interface used for scanning is called widowview, when I click on acquire scanner the Id changes to"0" and just displays the above error message

I looked in the device manager and an exclamation mark is by the scsi adapter & in the device status there is a message that reads;

"This device is using an interrupt request resource that is in use by another device and cannot be shared.
You must change the conflicting setting or remove the real mode driver causing the conflict (code 30)"

I have tried changing the IRQ which is set at (10) but it wont let me, it says windows will manage it even if I untick use automatic settings

I have looked through some other IRQ's and there are two others set at (10) these are pci audio device & IRQ holder for PCI steering, could that be the conflict?

sorry if this is so long but I am trying to give as much info as I can, plus this is driving me nuts!, I nee... Read more

A:scsi Host Adapter, conflict

Read other 16 answers
RELEVANCY SCORE 48

Installing an Adaptec AHA-150X/1510/152X SCSI Host Adapter and everything is working fine except that everytime I reboot i get the following error: "Host Adapter Diagnostic Error press F1 to boot" right after the memory count. This isn't a major problem but I would like it to boot up without having to press F1. The scanner that uses the card works just great, and there are no other noticeable problems. What am I missing here?
 

A:SCSI Host Adapter problems

Well, that usually means that there is some kind of memory conflict with the card.

Maybe with a sound card or modem you have installed... can you try taking out all cards but video and the SCSI? See if the problem goes away? You don't need to let it go into Windows of course - the error happens long before that.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 1 answers
RELEVANCY SCORE 48

I just finished going through and editing the music in my "music" file. It seemed to recognize most of my changes but some of the albums it didn't recognize and labeled them as "other". In the "music" file everything is labeled but in the media player it says that somethings aren't labeled. What may be causing this problem? Is there a way to update the player to recognize the changes or something? I am really stumped.

A:Windows Media Player - Not Recognizing Albums

did you change the id3 tags?

if not how did you change them?

Read other 1 answers
RELEVANCY SCORE 48

Hi,I have a Dell 8400 Desktop computer (P4, 630 (3.0GHZ), HT, 2 MB, Em64T running Windows XP.This problem just started 2 weeks ago. When I put an audio cd in Drive D (the top drive), Windows Media Player (10.0.0.36460) comes on but it doesn't recognized the audio cd. Instead, I get the following error message: "Windows Media Player cannot play the file. If the file is on another computer, verify that you are connected to the network." However, if I just click on the small top arrow next to "Now Playing" in WMP, it recognizes the D Drive and I can play all the tracks on the audio cd.I have no problem playing DVDs in the D Drive.I'd appreciate any help you can give me in solving this annoying problem.radioron

A:Windows Media Player 10 Not Recognizing Audio CDs

Why don't you upgrade to WMP 11 ?http://www.microsoft.com/windows/windowsme...11/default.aspx

Read other 1 answers
RELEVANCY SCORE 48

Ok, I've had this computer for about 5 years now and used 1 of the MP3 players for 3 years, the other MP3 player for about a year. They worked fine up until about 2 months ago. When you plug them the computer "sees them"; however, it won't recognize them. IE, under "my computer" I can see that they are there, but I cannot transfer files to them.

On the other hand both my camera's(photo and vid) will download onto the comp. I did not downloan anything, intentionally, prior to this condition.


On a side note, I have an aborted Windows re-install that I'd like to get rid of(happened years ago). Every time I restart I have to select whether I want to run the aborted install version, or the correct one. It's more of a hassle then a problem, but I just found this site and thought I'd throw it out there.

Thanks for any help you can provide.

A:Xp Media Stopped Recognizing 2 Seperate Mp3 Players

Forgot to add, the two mp3 players are different brands and run on different software, and I've tried re-installing the software.

Read other 3 answers
RELEVANCY SCORE 48

HP Pavilion Model m9150f For some reason it no longer recognizes My Pocket Media Disks or exteral usb drive!

A:My system is not recognizing pocket media disks or any other...

I have had a similar issue with my home computer doing this to an external drive and my Android phone. The external drive I ended up having to plug it in thru an IEEE 1394 (firewire) port for it to recognize. I suspect the issue you are running into is very similar to mine. Is your external drive's power supplied by the computer or does it have an external power source? Same for the pocket media drive. If youa re running them off of the computer power, the motherboard may no longer be supplying enough power to it to activate as it once did (assuming it worked fine like this before).  Some things to try: 1. Unplugging the external drives for a few seconds and plugging them in. 2. Use the USB ports on the back of the computer. Regardless of brand, I've found these work much better for external storage devices than front ports. 3. Make sure you have drivers installed if they are supplied by the manufacturer.4. You can also go into Device Manager and uninstall USB controllers, USB Composite Device and USB Root Hub. Restart the computer and Windows will reload all of them. Test it out then and see if that helps.



Although I am an HP employee, I am speaking for myself and not for HP.Make it easier for other people to find solutions, by marking the answer ?Accept as Solution? if it solves your problem.***Click on ?Kudos? STAR to say thanks!***

Read other 2 answers
RELEVANCY SCORE 47.6

I am using Windows XP. I recently installed a new modem. The modem works beautifully, but I cannot print. When I look at the device manager I notice that the Adaptec AHA-1502 SCSI Host Adapter is using IRQ 10 and I/O Range 0140-0154. THe Generic 56K HCF Data Fax Modem is also using IRQ 10 I/O Range EC00-EC07 and Memory Range E9000000 - E900FFFF. There is a check mark on both property boxes for use automatic settings. No Conflicts are listed in the conflicting device list for the modem, but the conflicting device list for the SCSI host adapter lists these conflicts:
Interrupt Request 10 used by: Generic 56k HCF Data Fax Modem
Intel(r) 82371AB/EB PCI to USB Universal Host Controller.
The Use automatic check box is checked but grayed out in the property box for the modem, but is checked and not grayed out in the property box for the SCSI host adapter. Any suggestions?
 

A:Modem Conflicts with SCSI Host Adapter

Hi,

If it were mine I would go to Start, Control Panel, System, Hardware, Device Manager and delete all references to a modem.

Shut down and move your modem to PCI #3 or the third slot down from the AGP slot)

Boot up and enter BIOS setup menu.....when you get there, then go to the PnP area and DISABLE it if you are using WinXP. (If it were Win98, then you would enable it)

Save and Exit and reboot

When it boots, add the latest and best drivers from the manufacturer's website for the modem.

That should solve your problem.
 

Read other 1 answers
RELEVANCY SCORE 47.6

I want to connect several VM's mainly Cisco router to same network adapter (vmnet1 host-only network adapter) and want to pass multiple VLAN's as Tagged. I am able to achieve this requirement through bridged network adapter but unable to do so through host-only
adapter. I am using Windows 7 as main OS and VMware Workstation 11.
I have gone through several tech forums but unable to find answer for it. Though in multiple forums one statement was common that Windows will strip the VLAN information when packet received/transmits through network adapter.
I would really appreciate if anyone can help me with this.

Read other answers
RELEVANCY SCORE 47.6

Appreciate some assistance.

Was changing BIOS settings (PnP/PCI Configuration) while installing a modem (IRQ 3 was set to Legacy/ISA), and enabled "Reset Configuration Data". What in the heck possessed me to do that, do not know. Saved changes, exited BIOS, and after
that, got the following message on the screen:
"Host adapter hard reset timeout.
BIOS not installed.
Unable to enable/disable host adapter shadow RAM."

Have a SCSI hd connected to an Adaptec Host Adapter (1540CF/1542CF). Tried Control>A to access the BIOS of the AHA, but NOTHING happened. Needless to say, cannot access the SCSI drive C:/

Did I fry the goose on this one? Needless to say, need some help.

 

A:Host Adapter hard reset timeout?

Can you not get back into the bios??

If not, try taking the battery out and putting it back in and restarting.
 

Read other 3 answers
RELEVANCY SCORE 47.6

What network adapter settings mean vms can communicate with each other but not with host? Thanks
Vmware Workstation 10

A:Network adapter settings to isolate vm from host

Hi there

Some sort of Switch / subnet probably required here with firewall settings also perhaps to block communications from the subnet.

I think this is more of a Networking issue than a VM one itself. The other question - do you still want the HOST to have access to the Internet.

I've only done this where I've had a SINGLE VM which needed Internet access for a "Dodgy site" --was testing a Virus and so I attached the NIC physically to the VM and disabled networking on the HOST while I was testing.

However if you need Internet and LAN access on the HOST and you have more than one VM running concurrently I should ask the Network gurus as this is outside my area of expertise. I suspect also you might need two Physical NIC's for this - one for the Host and one for the subnet your VM's are on - but I can't give any more help than that.

Try asking @Kari -- I'm sure he's done things like that but he uses HYPER-V which is also a good system if you have W10 pro or Enterprise.

Cheers
jimbo

Read other 5 answers
RELEVANCY SCORE 47.2

Hi!
I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable. Has anyone else had this problem?

Also, this is my first post, so I'm sorry if I posted something incorrectly!

A:Vista not recognizing DVDs while Media Center is Running

Use a program like PowerDVD, it works much better for DVD's.

Read other 4 answers
RELEVANCY SCORE 47.2

We recently purchased a used dell Inspiron 660 from a computer
recycler. They had removed the hard drive. We have replaced the hard drive. We got
a Dell Windows 8.1 recovery media for windows 8.1 products 64 bit DVD on Ebay. It
has PN JDNFT on the DVD and PN ORGH4G on the label on the sleeve seal. When
beginning to reload Windows with this DVD it does not automatically find the COA in
the Bios and it asks for a COA Key. I used an utility and found the Bios key. I tried manually entering this key and it says that
it is an invalid key. Do I have the incorrect recovery disk, or is there another
problem? Windows 8 label indicates that the computer originally had window 8 (not pro).

A:Reloading windows 8.1 from recovery media not recognizing COA in Bios

8.1  media will not recognize 8.0 keys.
You have to use the Non Activation Key and then change it online.
Once installed and online you run Slui.exe 4
Showkeyplus may be required to get the actual key in bios
https://github.com/Superfly-Inc/ShowKeyPlus/releases/download/ShowKeyPlus6125/ShowKeyPlus.zip
 
Version history: Update Version 1.0.6125 Bugfix:

Version check returning null error

Bug fix:

Product key checking referencing incorrect dll. on Windows
Since you have 8.1 media you will need to use the 8.1 home key.

Install now, Activate later

In previous versions, it was possible to install Windows without key, run it as trial for up to 120 days, and enter a product key later. This option on first sight seems to have been removed as of Windows 8.

Pre-install Windows 8.x or Windows 10 with a generic key. These keys can only install Windows. It's not possible to activate using these keys.

XKY4K-2NRWR-8F6P2-448RF-CRYQH (Windows 8 Pro) RR3BN-3YY9P-9D7FC-7J4YF-QGJXW (Windows 8 Pro MCE) FB4WR-32NVD-4RW79-XQFWH-CYQG3 (Windows 8 [Home])
XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB (Windows 8.1 Pro) GBFNG-2X3TC-8R27F-RMKYB-JK7QT (Windows 8.1 Pro MCE) 334NH-RXG76-64THK-C7CKG-D3VPT (Windows 8.1 [Home])

VK7JG-NPHTM-C97JM-9MPGT-3V66T (Windows 10 Pro) YTMG3-N6DKC-DKB77-7M9GH-8HVX7 (Windows 10 Home - multi language)
BT79Q-G7N6G-PGBYW-4YWX6-6F4BT (Windows 10 Home - single language)
 

Read other 1 answers
RELEVANCY SCORE 47.2

Hey guys, quick noob question here..

I'm trying to hook up a new wireless network in my house and bought a new N 300mbps router and an upgraded wireless adapter.

When setting up the router, does it need to be hard connected to a host PC or can it just be connected to the modem only for the network to operate?
I want the modem and router to be off in another room while i connect to it via my new wireless network adapter on my PC. Does the network (router/modem) need to be connected to a host PC to work properly? If this is the case, then i just bought a new network adapter for no reason....

Thanks for any assistance.
 

A:Wireless adapter, router- is host computer required??

Router goes to modem. That's all you need. The only time a hard-wired connection is handy is when you want to change the router's settings or update its firmware, but otherwise it needs to be connected to nothing else.
 

Read other 2 answers
RELEVANCY SCORE 46

I installed a PCI firewire card that i ordered, and my computer doesnt boot. It makes a couple of beeping noises (more than usual) and the computer just doesnt boot. I think it might be an IRQ conflict between the PCI firewire card and my new AGP graphics card, because my monitor doesn't work whenever the firewire card is in. These are some devices in my PCI slots: sound card, modem card, and ethernet adapter. Here are the specs: 500 MHz PC, pentiumIII, 512MB SDRAM, Windows XP Pro.

Is there a way I can install my PCI firewire card and make the computer boot? Thanks in advance for any advice.
 

A:Installed PCI 1394 Firewire Host Adapter, computer doesnt boot

Look up the beep codes in your motherboards manual and see what they mean exactly. It can be something as simple as a loose keyboard cable.

You could also try putting the controller in another PCI slot. The first and the last PCI slots are not the best ones to use since usually those share resources with other motherboard devices.
 

Read other 1 answers
RELEVANCY SCORE 46

Good Morning;

RE: server with an AIC SCSI Host Adapter, on boot goes thru
Channel A ok, then goes to Channel B, makes start-up request of Iomega Jaz IGB, and FAILS...actual chanel B target Id #4 says...."Unexpected scsi command failure ", followed by a bunch of stats (locations). Hardware mgr indicated the Jaz device checks out ok, (Jaz only dvice on B channel but the channel itself indicates its functional)-

Anybody have a suggestion where to begin to look for source of problem? doesnt appear channel corrupt just the jaz device itself, more likely, its scsi channel B settings- any troubleshooting assit would be genuinely apprteciated!

regards
Webz
 

A:[SOLVED] SCSI Host Adapter produces start-up request failure...

Read other 16 answers
RELEVANCY SCORE 45.2

hello all,

just have a relatively simple question here. i am privy to somewhat sensitive info not meant for the general public and i store my files on a thumb drive for convenience so i can use any of the various agency machines. If i open a file from my thumb drive, can it somehow be recovered from the host computer I was using after i have disconnected from it? sorry i'm a n00b
 

A:Removable media recovery from host

I guess you're thinking that data could have been cached on the host and might
be accessible via the cache.

It would be hard to locate and quickly lost due to normal operations.
Some persistent data might be left if the system were to hibernate with the device
attached. The hiberfil.sys file would be present for someone to scan through.

If some data were encrypted, then the act of decrypting would leave tidbits in the temp\ directory.
Use Disk Cleanup after you dismount the USB and before you logoff.
 

Read other 4 answers