Over 1 million tech questions and answers.

New Build: Random Bsod, Multiple errors.

Q: New Build: Random Bsod, Multiple errors.

TRAPCOMPUTER-Thu_10_01_2015_173947_63.zip
Here are the Dmp Files

Bsod can happen a couple minutes after startup, it can happen when using Chrome, it can happen when starting up a game. I cannot isolate what exactly triggers them. I have swapped ram around, ran with one, I have used memtest and it found no issues, all drivers have been updated. I'm lost at this point and an amateur so I need some direction.

RELEVANCY SCORE 200
Preferred Solution: New Build: Random Bsod, Multiple errors.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: New Build: Random Bsod, Multiple errors.

Hi Chewbacca21,

Welcome to the 8forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:Double click the executable to open itClick on the button shown below


If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

The driver of the mouse has been flagged.
Please check here for driver updates

Code:
0: kd> lmvm Lachesis
start end module name
fffff801`59a3d000 fffff801`59a44680 Lachesis (no symbols)
Loaded symbol image file: Lachesis.sys
Image path: Lachesis.sys
Image name: Lachesis.sys
Timestamp: Fri Aug 17 09:48:44 2007 (46C552DC)
CheckSum: 00016FC6
ImageSize: 00007680
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 1 answers
RELEVANCY SCORE 78.4

I just built my first desktop and am getting regular BSOD's. They seem to be occurring at any point where the system would access RAM. I have, however, successfully installed Windows 7 Ultimate x64 and programs such as Chrome and itunes without issue. I have attached a collection of my minidump files...any assistance would be helpful. I originally intended on running 16gb of RAM but my Windows install kept bombing. I pulled out one of the 8gb sticks and the install completed. I am currently running on the 8gb. As this is my first time, I am a little confused on how to approach all of this - any direction would be helpful! Thanks in advance, Jay

A:Multiple BSOD's/Errors on new build

Probably that stick of RAM is bad or does not match the settings of the other ram. Have you taken Memtest?

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.RAM - Test with Memtest86+


   Note
Pay close attention to part 3 of the tutorial in order to rule out the faulty stick.



   Information
Errors are sometimes found after 8 passes. One error can be found after 20 passes. So be patient.



   Tip
Do this test overnight, before going to bed.

Read other 6 answers
RELEVANCY SCORE 77.6

A few weeks ago i build an entire new gaming desktop. At first all was fine but recently i started getting different blue screens.

The errors i have gotten are
0x000007e
0x000001e
0x0000050

I have run 8 passes of memtest86+ with no errors. Attached are a zip of my dmp files.

Thanks.

A:Multiple BSOD errors on brand new build.

Welcome aboard.

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
From your recent crashes, we can say that those are drive related. Update your display driver (I got an nvidia update today) update the audio driver, too!
And, Video Card - Stress Test with Furmark

Let us know the results.

Read other 9 answers
RELEVANCY SCORE 76

so i recently built my gaming desktop and every now and then windows crashes and i get a blue screen which says dumping physical memory. i read the thread about what i should upload in order to get help however i dont know how to run a system health report as i cant find the program in start.i have disabled the auto restart and have managed to see two of the errors
stop: 0x0000004e and
stop: 0x0000001a

system specs
2500k intel i5 3.3ghz
memory: corsair vengence 1600mhz 2x4gb
gpu: radeon 6950 2gb
motherboard: gigabyte z68x-ud3h-b3
hdd: 1tb black caviar

i will attach the Windows_NT6_BSOD_jcgriff2 so you kind people can help me
plz bare with me and dont get mad if i have done something stupid


the crashes are very random and i have installed all my drivers.
thankyou

A:bsod on a brand new build its random and comes as different errors

  
Quote: Originally Posted by bilal123


so i recently built my gaming desktop and every now and then windows crashes and i get a blue screen which says dumping physical memory. i read the thread about what i should upload in order to get help however i dont know how to run a system health report as i cant find the program in start.i have disabled the auto restart and have managed to see two of the errors
stop: 0x0000004e and
stop: 0x0000001a

system specs
2500k intel i5 3.3ghz
memory: corsair vengence 1600mhz 2x4gb
gpu: radeon 6950 2gb
motherboard: gigabyte z68x-ud3h-b3
hdd: 1tb black caviar

i will attach the Windows_NT6_BSOD_jcgriff2 so you kind people can help me
plz bare with me and dont get mad if i have done something stupid
the crashes are very random and i have installed all my drivers.
thankyou



These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it ca... Read more

Read other 3 answers
RELEVANCY SCORE 76

Hello, after lurking these forums and looking into my issue I cannot find a solution. I am experiencing crashes on my new PC build.

Since my first day of building it, I have experienced BSOD errors/random crashes. I cannot seem to find something that will make it crash. In other words, I cannot replicate this problem. I cannot pinpoint it to one piece of software or action on my computer. I also do not know if this is a driver related problem, or a faulty hardware problem.

There are times where I can play a game for 3+ hours on end, and not experience a crash. There are times where I boot my pc, open up a browser, and it crashes before I can load the first webpage.

Some BSOD errors include:
IRQL NOT LESS OR EQUAL TO
KMODE EXCEPTION NOT HANDLED
DRIVER OVERRAN STACK BASED BUFFER
MEMORY MANAGEMENT
SYSTEM THREAD EXCEPTION NOT HANDLED

Attached is the zip file I created from the BSOD posting instructions
Note: Many of the errors point to LgBusEnum.sys. I believe I have corrected this error as I uninstalled the Logitech Gaming Software. This errors happened when using driver verifier. I no longer get them.

Things I have tried/know:
memtest86+ on a few occasions. One test included both sticks of ram with 13 consecutive passes. No errors were found.Tested my GPU on Unigen Heaven. It can run for hours at normal temperatures unless a random crash occurs.A 15 minute test on Prime95 resulted in no crashing/overheating etcI have tried my best to make sure that I have all up-to-date dr... Read more

Read other answers
RELEVANCY SCORE 76

So, i built a system 2 weeks ago and encountered some errors.

6850k
Msi godlike x99 mobo
2x 1080 hybrids
1x corsair h115i cpu cooler
1000 watt be quiet plat label.
32gb corsair vengeance ram
250gb ssd
2tb 7.2 k rpm
1 tb m.2 ssd

When i built th systm everything seemd to work untill a random restart (read;not shutting down, just drop dead and reboot)

After playing around with oc's for the cpu, the system ,yesterday, would drop dead on starting up games like total war warhammer and gta5

After continuously crashing i tried troubleshooting the system.

Prime95 ran fine for the cpu, excluded.
Furmark crashed the system instantly.

As it would shut down and boot up immediatly i think it's safe to say its not a heating issue.

Trying a new windows install , it still crashed.
Swapped out the psu for an exact same one and now i can start and run games again , even with higher FpS than before the psu switch.

Next to that i changed the ports on my sli 1080's
As i figured one of the gpus might be broken, but testing them in single mode didnt make furmark crash the system.
After testing them i put the monitor cables in the bottom one (stated as gpu#1 even though its in pcie slot #4)

After running furmark twice in different settings and benchmarking a game on ultra it didnt drop yet.

Any insights if the psu was the culprit and is it known that systems run less stable/ less well if there is something up with the psu?
 

Read other answers
RELEVANCY SCORE 75.2

[SOLVED] In case this helps anyone. It seems that the RAM itself was faulty. RMA'd the two RAM sticks and popped in two new ones. Problem solved.[SOLVED]

Hello everyone

As the thread title says, I've been getting multiple BSODs and restarts on my new pc build. Hoping for a kind knowledgeable soul who may be able to help diagnose a little further. All my pc specs are filled out in my profile.

A bit of background info. Initially the computer booted up fine for the first day or two. Checked temperatures using RealTemp (they seemed appropriate, in the 25C - 30C when doing light web browsing) and tested ram using memtest but only did 1 pass(later found out that i needed to do more than 1 pass, but it didn't show any errors on that pass that i did).

The bsod's are along the lines of IRQ not less or equal, bad_pool_header, and maybe one or two others which i can't remember at the moment.

I've been searching google for a while and can't come up with any solution. Some say uninstall/reinstall drivers. I have only installed what came with the motherboard when this started happening, so didn't try this yet(nor can i, the pc doesn't generally give me long enough to do this before restarting or bsoding).

Some suggest a sub-par psu will cause these problems. I'd say my psu may be sub-par, but many have used it succesfully for pc builds. It's this psu and came with the thermaltake v3 case. So not sure if this is the problem or not.

This is as far as I've got. I've atta... Read more

A:New PC build. multiple BSOD, random restarts

The power supply is severely lacking. It has a total of 29 amp on the +12 volt rail(s). These days the +12 volt rail pretty much powers everything in the machine, so getting a PSU with high amperage is a must. My guess, unable to decipher your bsod logs, is that's the culprit.

You must run memtest for 8 hours to test and stress every address range. However, sometimes that's not sufficient to find if the RAM is OK.

It's a pain, but after memtest, given no errors, then boot into Windows and run Prime95 for another 8 hours. This will put an unrealistic stress on the machine and tell you for sure if you're RAM is ok. If there's a problem with the RAM, it will show up relatively quick... within the first hour or so. Errors after that could also be fsb related.

After Prime, I always run dual instances of Orthos. This is going to tell me if I have sufficient vcore. Errors here are almost always fsb... given passing memtest and Orthos.

Read other 5 answers
RELEVANCY SCORE 75.2

I've been trying to fight with my newly built computer for the past week, but I just can't seem to figure out what the problem is.

I've been having all sorts of random BSOD errors, they don't seem to happen at any set interval or have any obvious cause to them. Sometimes they happen within 10 minutes of each other, sometimes 4 hours later. They all have differing codes as well. I suppose I should start from the beginning of my week and explain some of the things I did.

When I first tried to install Windows Updates, it locked up on one of the updates and stayed there for an hour, before ultimately restarting itself and saying it failed. I ended up getting all the updates to install, but then I began to get random BSOD errors. I had all sorts of different codes and couldn't figure out what to do.

Since then I've reinstalled Windows, so I lost all of those previous logs. However, this time around I was able to get all the windows updates installed with only a few security updates failing, and the ones that failed were successful after giving them a second attempt. But I've still been having the random BSOD errors.

Not all of my crashes/freezes have managed to create dumps either, some of them would go to bluescreen but hang before creating a dump file, so I'd have to manually restart them. And yesterday I tried Driver Verifier to see if I could figure out a specific cause, and while it was running it stopped giving me bluescreen errors and instead, whenever my computer would... Read more

A:New computer build - Random BSOD errors, at least 8 different codes

Please remove Gigabyte software, Gigabyte software has been flagged in a 0xC4 but is also known for causing a 0x124 which also has occured.

Code:
*** WARNING: Unable to verify timestamp for gdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for gdrv.sys
Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the drivers using custom/advanced options.


Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
3: kd> lmvm atikmdag
start end module name
fffff880`0f48e000 fffff880`10bd5000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Nov 18 06:43:17 2015 (564C0FF5)
CheckSum: 016DE370
ImageSize: 01747000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 1 answers
RELEVANCY SCORE 74.4

Hi all, long time reader, first time poster. I'm hoping I can get some help here. I've tried everything I've seen on other threads, but I'm still getting the BSODs at random times.

I recently built this new pc, and am having trouble with random BSODs with random timing. Sometimes sitting idle, sometimes I'm just moving files around or web browsing. They seem to happen between every few day and every few hours.

I ran driver verifier for a while, and uninstalled some of the things it errored on (Dameon tools, the nvidia audio driver, gigabyte EZ tune). I also ran memtest86+ for days, testing each stick and each slot. I let memtest run past pass 8 each time. The last run I did was with all sticks in all slots, and I let it run to pass 21. No errors.

I have the newest drivers for all components. That said, I think my monitor may not have compatible drivers. Dell doesn't have any available on their website. I did not install any manually (meaning whatever is installed is from windows).

I have also run disk repair on all drives, with errors detected and fixed on one. The issue persists after the disk checks.

Power is coming from a CORSAIR AX760.

Any help would be great. I've never had as many issues with a new build as this one. I'm hoping I'm missing something simple.

A:New build, multiple random BSOD with various error codes

Hi Alex, welcome to W7F.

The one dmp you provided shows an issue described in Stop D1 (DRIVER_IRQL_NOT_LESS_OR_EQUAL) bugcheck in USBPORT while transferring USB data and selecting USB interface
You might have an issue with your USB driver. Please post an image of your Device Manager.
Open the Human Interface Devices and the Universal Serial Bus controllers category.
Adjust the window so that all the data is visible.

FYI - With only one dmp, it is difficult to be sure you have the culprit. That is one reason why I need to see the Device Manager.

Read other 9 answers
RELEVANCY SCORE 74.4

I'm having multiple bsod that happens very randomly. I recently purchased an ssd it was working perfectly fine but now I just get these bsod. I think it's because my motherboard might be a slight defective but I still need help. I've been reformatting my windows to stop it, but it just keeps happening. Here are the logs of my bsod's before my last reformat. I don't know what else you I need besides the mini dumps I tried the tool but I just bsod when I use it, I can still boot my computer into safe mode.

A:BSOD Multiple Errors, New SSD, It's random

Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 74.4

Got this pc a week or so ago. BSOD seems to occur whenever I play games. I've played incremental games and used youtube for a few hours and some days it'll occur in an hour and some days it doesn't occur. It always occurs when playing most other games (on steam).

Not much I can say that isn't listed in the dump files except that Driver Verifier causes my audio to become shitty and I'll always end up with a corrupted screen (meaning I need to restart) before BSOD, so I can't seem to use that. I'll try and find a usb to run memtest+ on tonight.

A:New PC, random BSOD. Multiple Errors.

The errors you're receiving are mostly pointing to corruption or some defect in hardware. Before we start looking at drivers could you perform the steps outlined below please.

Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+



   Note


Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Run chkdsk. Disk Check

Open an elevated command prompt, type in or copy and paste sfc /scannow and hit enter.

Read other 9 answers
RELEVANCY SCORE 74.4

I've been having fairly frequent, seemingly random BSOD's lately, only major hardware change I've made recently was upgrade my videocard to my current Nvidia GTX 750 Ti.

Errors are multiple, including Kernel_Security_Check_Failure, PFN_List_Corrupt, and System_Service_Exception.

Ran memory check and hard drive error check, no problems there.

Appreciate any help you can offer, folks!

A:BSOD's at random, multiple errors

Just to add some more information, today I've had a DRIVER_OVVERAN_STACK_BUFFER and DPC_WATCHDOG_VIOLATION bluescreen. I reinstalled video and audio drivers, no luck.

Read other 11 answers
RELEVANCY SCORE 74.4

Just upgraded mobo, ram, cpu, and video card. Keep getting random BSOD. For example, sometimes it will happen when i run the windows experience index, sometimes it won't, and same goes for other applications. It seems to happen the most when i have both sticks of RAM installed. Works fine with just one, and it doesn't matter which one it is.
I've ran memtest on both sticks of ram in every slot by themselves, and also together. No errors after 7 passes. Manually updated all drivers.

Win 7 Ultimate 64bit, Retail
AMD FX 4100
ASUS M5a97 mobo
Patriot Gamer 2 Series 8GB (2 x 4GB) Model PGD38G1600ELK
Geforce GTX 550ti
420w PSU

A:Random BSOD, multiple errors

These were all related to memory corruption (typically a drive). Please run verifier to find the mis-behaving driver.
These crashes were caused by memory corruption probably a driver.
Please run this test to find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developer... Read more

Read other 5 answers
RELEVANCY SCORE 74.4

I recently built a new system with my father and he has been having random BSODs with always a different error from day one.

Unfortunately he tried to re-install so all I have is one .dmp file since the re-install.

0x7E dxgmms1.sys was the last one he encountered, I have an email with the other errors he got BSODs from:
0x7E aswmonflt.sys
0x1A ntoskrnl.exe
0x1A ntkrnlmp.exe
0x24 ntfs.sys
0x3B ntoskrnl.exe
0xF4 ntoskrnl.exe
His system specs are in my profile also.

He tested his RAM with memtest86 for 5 hours with no errors he said.

Thanks in advance.

A:Random BSOD errors, new custom build system, tried reformat.

There is only one crash dump, which is not very informative itself.

It also appears that you already have uninstalled Avast which did not help.
But you havent employed an antivirus back. Which is not healthy. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Now, as you reported for versatile BSODs, better we take a memory test. Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. Further actions will be needed depending on the result.
___________________________________

Code:
BugCheck 24, {1904fb, fffff88007811d48, fffff880078115a0, fffff80002ac4fc4}

Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceExclusiveLite+54 )

Followup: MachineOwner
---------

Read other 9 answers
RELEVANCY SCORE 73.6

I have mostly a new build. The CPU, Mobo, SSD and GPU are all new. The RAM and PSU are taken from a previous build, but only a couple years old.

I have had problems since I got this build together. I get random crashes or freezes. Sometimes it happens every hour, sometimes I can go a couple days without one.

I have run Memtest overnight with no errors on this mobo and the previous one, and Windows Memory diagnostic with no errors all day long, so I think I can rule out the RAM.

The SSD has never reported any errors in the Seagate tool.

The CPU passed Prime95 and the intel burn test.

I have not really stressed the GPU outside of some newer games on max settings (Wolfenstien, Watch Dogs, Murdered).

I recently updated my mobo to the newest firmware (it was just released about a week ago I believe), but it hasn't helped.

I have tried this system on Windows 8.1. I was getting random freezes, but I would never get a dump. I switched to Windows 7 and now I get dumps, but still cannot diagnose this problem.

I uploaded the sevenforums diagnostic tool results. The latest dump should be with driver verifier running. It took a while to crash, I was surprised.
I don't seem to get BSODs, just the computer kinda force shuts down and restarts and I have a new dump.

Please help me.

Build:
CPU Intel Core i5 4570
MOBO MSI H87G43
RAM 4GB x2 G.Skill Ripjaws
SSD Samsung 840 EVO 500GB
GPU Gigabype Radeon R290
PSU Corsair HX750

A:BSOD New build, Random times, multiple stop codes

Welcome to the forum annoyboye,
Is the firmware of the SSD up to date?

Read other 9 answers
RELEVANCY SCORE 73.6

This PC was built nearly a year ago and I am now starting to run into sever random BSODs. I've done sever MemTest, DskChks, GPU tests, CPU tests and have not run into but one odd problem. When running a MemTest on he RAM, only twice, have I run into some errors. I removed the sticks that were reported bad. Though I'm still getting all types of errors. Occasionally y the PC will also restart on it's own.

Originally I had x4 8GB of RAM. Now I'm on 6GB. One stick seemed to be bad. But when I go back to test the other sticks I sometimes get errors, and some times will not. I've run 7 passes on each stick in different slots. Only sometimes I'll get errors, then the next test on the SAME stick, no errors.

I've checked all my drivers and made sure they were all up to date. I've gone into the PC and made sure everything was plugged in correctly. Also made sure there were no bad capacitors and other components/hardware. Everything is secure in place and correctly installed, hardware wise. Tested the Power Supply and it checks out okay as well.

This did not start occurring after some software install either. I've done complete formats and re-installing Windows 7 64-bit.

What is really odd is the BSODs and restarts happen several times in a row. After a few BSODs and restarts the PC will be fine for easily 8 hours with no problems. It all seems to happen after it's been off for a night. The first hour, give or take, after being turned on does it all occur.

Attached is my ... Read more

A:BSOD. Multiple errors. Random occurrences.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 9 answers
RELEVANCY SCORE 73.6

I built my PC about two years ago and it has sporadically had BSoD's the entire time. Sometimes it is while playing a game or just idling. I can't seem to replicate it, it just sort of happens. My first thought was perhaps bad memory. I initially had 8 GB of Corsair ram that I have ran Memtest on for multiple passes and they have all come back clean. Same for chkdsk on both of my drives (the HDD was the first primary OS drive until the SSD was purchased). They both have always come back clean. I then thought it was my cracked version of Windows 7.

I recently bought a licensed copy of windows, 8 more GB of Corsair ram, and a new video card. I added the RAM and video card first and logged in. I started getting hard freezes after 3-5 minutes of logging in with all 4 ram sticks in, then endless boot loops. I did a fresh install of Win7 with the legit copy, same thing. I removed 2 of the ram sticks( the originals) and the boot loops stopped and I was able to get windows updated and drivers installed. I put the original ram back in and after an hour or so I got the original BSoD's again. I then removed the original, leaving the new ram in. So far I have only gotten 1 BSoD naturally with the new ram in but then again, they have always been very random, sometimes having 5 in a day and then none for a few weeks. I ran driver verifier and within 2 minutes of running it caused a BSoD about the registry filter, but most of the others are critical structure corruption via ntoskrnl or ... Read more

A:Random BSoD's throwing multiple errors

Ok, I figured out how to get the attach button to work. It was something to do with my university network because while running through a VPN it works fine. Anyways, here is the required .zip files, finally.

Read other 1 answers
RELEVANCY SCORE 73.6

This has been happening for some time now, but it became more frequent recently. The computer will seemingly freeze out of nowhere, sometimes creating a BSOD, sometimes not. The way the problem comes up is kinda weird. As long as I don't launch any intensive 3D applications, the crash will either happen in the first few minutes after booting, or not at all. If I make it through the first few minutes, then I can leave the PC running for weeks (literally, I tried) as long as I don't do any gaming. If, however, I get a crash, then usually I'll get multiple in a row. Once it even froze in BIOS. Even weirder, the same application/game that can, sometimes, cause it to freeze within minutes multiple times in a row, will, at other times, run with no problems for hours on end.

I've attached the zip with the last few dumps, though obviously that's not the full extend of the problem, seeing as quite a few of the freezes will leave no "evidence" behind. I also have 8 Kernel-Power (ID 41) errors in my event viewer, though that seems to be the restarts I had to force after freezing.

Thanks in advance for your help.

Read other answers
RELEVANCY SCORE 72.8

Hello,

My PC is experiencing random crashes/freezes, and BSOD, typically at start up when I start browsing the web or at times at playing PC games. My WhoCrashed analysis seems to have multiple error codes indicating driver issues but I cannot recall installing any new software recently, some of the error codes are:

On Fri 6/6/2014 12:03:42 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: Unknown (0xFFFFF8800CB48190)
Bugcheck code: 0xA (0xFFFFF8800CB48190, 0x2, 0x1, 0xFFFFF80002D050B2)
Error: IRQL_NOT_LESS_OR_EQUAL
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error.
Google query: IRQL_NOT_LESS_OR_EQUAL

On Thu 6/5/2014 11:50:22 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\060514-14508-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x50 (0xFFFFF8A229099FC0, 0x0, 0xFFFFF80002F960B9, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has ... Read more

A:Random BSOD, multiple errors - 0xFFFFF8800CB48190 & 0xFFFFF8A229099FC0

FYI, I am gong to run Memtest to determine if RAM is an issue, does anyone else have any suggestions from bug report?

Read other 7 answers
RELEVANCY SCORE 72.8

dump is included, not sure which issue to start with. it seems to have happened since windows did an update. also I get windows explorer crashed and restarts alot too

A:BSOD random blue screen different errors, one was multiple irp

  
Quote: Originally Posted by ownmart


dump is included, not sure which issue to start with. it seems to have happened since windows did an update. also I get windows explorer crashed and restarts alot too


You might want to mention it is a Mac.

The majority of these were caused by memory management (probably a driver).

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the proc... Read more

Read other 3 answers
RELEVANCY SCORE 72.8

Hi,
Could really use some help in determining what's amiss. The crashes seem to randomly occur, at least nothing that I can pin point. I also tend to think this may be cause by both drivers and hardware as on at least two occasions the computer would not restart. When powered on, it failed post and went into a series of rapid beeps. I don't believe heat is an issue but it has taken awhile before I'm able to get it to reboot on those two occasions. I've read the posting rules and I believe all of the system info is listed on my profile and hopefully I've uploaded the dump file. but please let me know if I've missed something or there is additional information required.
Thanks in advance!
Tony

A:multiple random BSOD's ERRORs 0x0000001e and 0X0000003b

Hi darenot.

There is a high possibility that the BSODs are caused by NVIDIA nForce Serial ATA Controller. The storage controller element of nvidia chipset; specially RAID. c:\windows\system32\drivers\nvstor64.sys

Code:
fffff880`02f1ba40 fffff800`02ad15d1 CLASSPNP!TransferPktComplete+0x1ce
fffff880`02f1bac0 fffff880`0110d6c8 nt!IopfCompleteRequest+0x341
fffff880`02f1bbb0 fffff880`0110d443 storport!RaidUnitCompleteRequest+0x208
fffff880`02f1bc90 fffff800`02ad830c storport!RaidpAdapterDpcRoutine+0x53

Code:
fffff880`02f1b978 fffff880`0117500fUnable to load image \SystemRoot\system32\DRIVERS\nvstor64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvstor64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor64.sys
nvstor64+0x600f
Which is too old.

Code:
Image name: nvstor64.sys
Timestamp: Tue Jun 23 03:53:37 2009 (4A400469)
It is almost impossible to find updates to nvidia chipset nowadays; specially for such an old HP.

Code:
BiosVersion = 5.27
BiosReleaseDate = 06/10/2008
SystemManufacturer = Hewlett-Packard
SystemProductName = D5468AT-ABA ALONPAV
So I would suggest you to get rid of the nvidia elements and use windows system native elements.

Boot into the BIOS. Disable RAID. Then perform a Clean Reinstall - Factory OEM Windows 7

If you follow the guide step by step, it will lead to a perfect windows install which is driver complete itself. No need to install any drivers from nvidia o... Read more

Read other 1 answers
RELEVANCY SCORE 72.8

Hello,

I've been trying to find solutions in other threads and online "help" only to find no help at all.
I would rather avoid contacting the Manufacturers if I can help it.

Some of the BSOD Error codes include:
1e, a, 24, 7e and many others.
I've had System Service Exception and Driver IRQ Equal or less (or something similar) and at this point I am at a loss.

--
System Specs:
AMD Phenom II x6 1075t 3.00GHz
4GB DDR3 RAM
nVidia GeForce 450 GTS
800w xilence PSU
Asus M4A87TD EVO Motherboard
Windows 7 x64 Home Premium SP1

- x86 (32-bit) or x64 ?
x64
- the original installed OS on the system?
yes
- an OEM or full retail version?
Full Retail I believe
- What is the age of system (hardware)?
6/7 months old
- What is the age of OS installation (have you re-installed the OS?)
No re-install as of yet, Came with windows 7.

--

I Can several high-demand games one after the other and get a clear day without crashes, then later start my Minecraft server or attempt to watch a video on YouTube and suddenly get a blue screen or random restart.
I also ran Virus Scans with Malwarebytes, Super Anti Spyware and Norton 360 and found Nothing, I did run a Check Disk and It supposedly found Hardware issues, at the least I would like to narrow it down to what It could be.
Since disabling alot of startup Items, I seem to be getting Less blue screens, Hence I'm not sure if its a false positive from the mem-check.

I've attached the Perfmon html and The Windows_nt files in one zip, an... Read more

A:Random BSOD, Hangs and Reboots, Multiple Errors

Most of these are said to be caused by ntkrnlmp.exe which tends to lead me to believe they are hardware related also a dump is pointed towards your usb drivers most likely outdated please update them.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\Windows_NT6_BSOD_jcgriff2\090511-24616-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03064000 PsLoadedModuleList = 0xfffff800`032a9670
Debug session time: Mon Sep 5 14:39:04.367 2011 (UTC - 6:00)
System Uptime: 0 days 1:20:44.209
Loading Kernel Symbols
...............................................................
................................................................
.............................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 72.8

Hi I started getting these BSOD errors around March of this year. It happens when I leave the computer idle for a while and then come back to start using it. The auto restarts started happening recently. The BSOD errors sometimes happen when playing games or watching videos or than that it's completely random. I know that overheating is not a problem since I get the errors even on a cold start. I have not overclocked anything and tried multiple memory tests, disk checks, updated drivers and even removing all programs with windows restore. None of these worked.

One thing I noticed is that when I first bought my computer I could hear the fan running at a faster speed and sometimes it would speed up even more. Now the fan is just running normally and quietly all the time.

I'll be happy to provide any other information you guys need. Thanks in advance.

A:Random BSOD, auto-restart, multiple errors

Welcome

The .nfo file is corrupted






Quote:
Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here







Quote:
Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here


McAfee is a frequent cause of BSOD-s, consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials at least to test.How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)
McAfee Removal Tool - McAfee Uninstaller
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combina... Read more

Read other 9 answers
RELEVANCY SCORE 72.8

About 2 months ago I started getting daily BSOD and black screen reboots. At the time I was running Win10 and they started happening right after a windows update and video driver update. Some days the computer would reboot 3-4 times during the day.

I rolled back my video driver to latest stable, uninstalled the latest windows updates with no change.

I use computer daily for my work and had to do something quickly, so I order a 2nd SSD and installed a fresh copy on Win7x64 Ultimate w/sp1. I thought things were fixed as I went nearly 7 days before a reboot happened again.

Some times I get a BSOD, sometimes screen just goes black and system reboots. I lost several BSOD as my computer was not saving the .dmp files. Searched forums and made changes and last BSOD on 3/1 save a BAD_POOL_HEADER mini.dmp.

I've had 6 black screen reboots without BSOD or dump file since then, only record is the Kernel-Power in event log. Most happen during normal computer usage, sometimes idle with audio streaming.

I've run the following with no errors or reboots.

memtest86+ for 18+ hours
BurnInTest V8.1
FurMark

I am running BOINC in the background and have tried disabling and still get reboots. CPU / GPU temps are consistently 45-50c.

I am running default BIOS settings for both CPU and ram with no overclocking. I updated to latest BIOS at the same time as the clean install.

Any help with solving this would be appreciated.

I've attached output from DM Log Collector to this post.

I... Read more

A:Multiple random BSOD and Kernel-Power Errors

I've also run the following without errors:

SFC /scannow
chkdsk /f

Read other 1 answers
RELEVANCY SCORE 72

Hi! Thanks for reading this post :)

I've been getting blue screen crashes for the past month or so and it seems to be getting progressively worse. The BSODs began occurring about once every couple of days, now they seem to happen about 5 times a day. They seem to occur completely randomly - they can happen upon startup to even hours working perfectly and they don't seem to be associated with any particular program that's running. Most of the time the computer will crash with a BSOD but sometimes it will freeze or slow all processes right down (eg mouse would take couple minutes to respond and move to a different place on the screen). I've had this computer for less than a year and it works great in all other aspects.

I tried figuring out what was causing the problem and I bluescreenview as well as WinDbg to pinpoint the drivers responsible. The driver causing most of the crashes is ntoskrnl.exe, others are hal.dll, fvevol.sys, HIDCLASS.SYS and Ntfs.sys. When I looked them up they were all part of the Windows Update, and yes, my Windows is completely up to date. WinDbg reported that it was a memory corruption problem but I've run a memory diagnostic test and all seems fine. I'm at a loss as to how to remedy this. I've followed the posting instructions and attached the output file. I would really appreciate any help I can get.

System Spec:
Windows 7 Professional 64-bit
No OS pre-installed
Age of system ~ 5 months
Age of OS installation ~ 5 months also

Intel Core... Read more

A:Random BSOD and Freezing, Multiple Types of Errors (see post)

Ran memtest86 and found heaps of errors. I have two ram sticks and ran memtest again with each individually. One of them had errors and the other was fine. It was still under warranty so I was able to get it replaced. No errors running memtest now with both ram in place. Will see if I get any more crashes but I don't think I will.

Read other 1 answers
RELEVANCY SCORE 71.2

Hello, I have been getting random BSODs recently. There is not an obvious cause or coincidental program i am using when these appear to be happening. The errors i am getting are pfn list corrupt, memory management, and zero irq system service.

A:Random multiple BSOD errors. pfn list corrupt, memory management

Welcome
Your codes are consistently Memory.
Run for 8 passes.
Then test each stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums

Read other 1 answers
RELEVANCY SCORE 71.2

Hi everyone, I've been constantly experiencing random blue screen errors with different error messages such as:
INTERUPT_EXCEPTION_NOT_HANDLED
KMODE_EXCEPTION_NOT_HANDLED
PAGE_FAULT_IN_NONPAGED_AREA
IRQL_NOT_LESS_OR_EQUAL

My system at the moment is
Windows 7 Ultimate x64
AMD Athlon II X3 455 @3.3ghz (Stock)
4gb DDR3 1333mhz
Biostar A780L3L mobo
AMD Radeon HD 6670 GDDR5 1gb
3 80gb Seagate hard drives

I did have 8gb of ram (two 4gb sticks)which at first I thought there was a problem with the memory, so I ran Memtest86 and found out that one stick had lots of errors so I've sent that stick off to be replaced, however the BSoD's still continue. I've tried a fresh install of Windows 7 which I encountered a BSoD during the install. I did manage to install a fresh copy of Windows on the hard drive though.

After installing, the BSoD's still continued, I went into the bios and underclocked the CPU from 3.3ghz to 3.0ghz because I thought that maybe the motherboard was under some kind of stress or couldn't handle the CPU at this clock speed. This still didn't help as the BSoD's continued. I thought it might be something to do with the onboard Realtek network chip as it crashed a good few times using any internet browser. I've tried disabling the onboard network chip and using an addon wireless PCI card but this didn't seem to solve anything either.

The system seems to work fine for a while if I'm not running many programs but eventually blue screens. If someone cou... Read more

A:Constant random BSOD errors, Multiple error messages on screen

Code:
BugCheck 3D, {fffff80000b9c120, 0, 0, fffff80002c7ed04}

Probably caused by : ntkrnlmp.exe ( nt!KiInterruptDispatchNoLock+2f4 )

Code:
0: kd> lmvm Rt64win7
start end module name
fffff880`04800000 fffff880`048be000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Thu Oct 25 10:20:09 2012 (50890449)
CheckSum: 000C14E6
ImageSize: 000BE000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Realtek RTL8168D/8111D NIC driver seems to be rather outdated and causing problems, update the driver from here:Realtek
Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.

Read other 9 answers
RELEVANCY SCORE 71.2

I am working on a laptop that has been getting random BSOD usually while nothing special is running. I have run memory checks, several antivirus scans to remove a lot of malware and trojans. Finally at my wits end with this. I would very much appreciate it if someone could point me in the right direction as to what is causing it.

Acer Aspire 7750-6669
Intel Core I3-2350M
6GB memory
1TB

Thanks in advance
Whyastarin

A:Random BSOD multiple errors ntoskrnl.exe+75bc0 bug check 0x00000101

Hello whyastarin .

Please remove IRST:

Code:
lmvm iaStor
Browse full module list
start end module name
fffff880`0109b000 fffff880`011ef000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\drivers\iaStor.sys
Image name: iaStor.sys
Browse all global symbols functions data
Timestamp: Thu Jan 13 03:50:12 2011
Driver Reference Table - iaStor.sys







  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.

Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.


Remove AVAST:
Remove Avast Anti-Virus following this article - avast! Uninstall Utility | Download aswClear
Install Microsoft Security Essentials as an alternative.


Missing SAS (SuperAntiSpyware)... Read more

Read other 3 answers
RELEVANCY SCORE 71.2

I have been dealing with BSOD for a while now, they seem to be occurring mostly during web browsing (Firefox) and listening to music (Zune software).

A:Random BSOD multiple errors: 0x000007e, 0x00000050, 0x0000001e, 0x0000

It looks like a combination of Bit defender failing for some reason:

Code:
fffff880`07eb9368 fffff880`012f75d4Unable to load image \SystemRoot\system32\DRIVERS\avc3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avc3.sys
*** ERROR: Module load completed but symbols could not be loaded for avc3.sys
avc3+0xd5d4
Driver Reference Table - avc3.sys
And your graphics drivers being very out dated:

Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
ERROR: FindPlugIns 80070005
ERROR: Some plugins may not be available [80070005]
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88004e605fe, fffff880072789f8, fffff88007278250}

Probably caused by : atikmdag.sys ( atikmdag+4425fe )

Followup: MachineOwner
---------
Driver Reference Table - atikmdag.sys

Time stamp on your video card drivers:

Code:
kd> lmvm atikmdag
start end module name
fffff880`04a1e000 fffff880`05352000 atikmdag T (... Read more

Read other 7 answers
RELEVANCY SCORE 65.2

Having just built a home office PC I'm experiencing various and random BSD errors. Sometimes the machine boots fine, other times I get the below errors in no particular pattern.

- Memory Management
- System Service Exception
- Bad Pool Headers
- Critical Process Died
- IRQL Not Less or Equal
- Bad Pool Error
- System Thread Exception
- 0xc0000021a

BIOS and drivers are all up to date.

Having taken 1 stick of RAM out, I'm struggling to replicate the errors, although each time I boot the PC either loses network connectivity and/or various software licences get reset (Stardock Fences being one). Could the Corsair RAM or motherboard cause these errors?

PC Components:

- W10 Pro (clean install about 2 weeks ago, cloned using Macrium Reflect to new SSD below)
- i3 6100 (I'm using the Intel HD Graphics 530 )
- ASUS H170M-PLUS Motherboard
- Corsair DDR4 2133MHz (2 x 8GB)
- Samsung SM951 m.2 SSD (Also tried Samsung 840 Pro SSD with same OS install)
- Bequiet 500W PSU
- ASUS Optical Drive
- Akasa AK-HC-07BK Card Reader (using mobo 19-pin USB 3.0 header)
- Fractal Case (using 2nd mobo 19-pin USB 3.0 header)

Any help, advice, feedback appreciated.

Thanks

A:New Build PC Multiple BSD Errors

Please use the BSOD posting instruction to provide the Dumpfile BSOD - Posting Instructions - Windows 10 Forums
And fill in your System Specs.

Read other 0 answers
RELEVANCY SCORE 62.4

Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty of air flow. I installed a Cool Mater Hyper Plus 212 heatsink. I followed the instructions, and looked at a few installation videos on my phone just to be sure. I'm pretty positive everything was done correctly including the thermal paste as my system has not gone over 45C while gaming even playing games on Ultra settings.

I got one BSOD late last night, after about 6 hours of it being on but no other problems after that. Today however I have been having BSOD issues the entire time at random times from just 5 minutes up to 2 and a half hours between BSODs. They have ranged from: NTSF_FILE_SYSTEM, PAGE_FAULT_IN_NONPAGED_AREA, KMODE_EXCEPTION_NOT_HANDLED, and SYSTEM_SERVICE_EXCEPTION

I have researched the errors on google all day and tried fixes for each one such as running memory diagnostic tool, deleting the old page info from memory and creating a new one, deleted all of my video drivers and reinstalled them, and I've even opened my case to make sure all my memory and cards are plugged in all the way.

These are the errors that BlueScreenView gave me:

120313-25490-01.dmp 12/3/2013 11:01:36 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff87f`f903edfb 00000000`00000008 ffff... Read more

A:Random BSOD problems in the past 2 days. Random errors at random times

Welcome to the Forum.

Please remove the software:

Code:
Start Menu\Programs\Advanced SystemCare 7 Public:Start Menu\Programs\Advanced SystemCare 7 Public
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer



Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a known cause to BSOD's. Please remove it and use Microsoft Security Essentials it is recommended from a strict BSOD perspective, compatibility... Read more

Read other 9 answers
RELEVANCY SCORE 61.2

Multiple BSODs over the last year, sometimes while logging in, sometimes after 15 minutes of running. Have tried SFC/SCANNOW, memory test, CHKDSK, all with no reported errors. Did a system restore to Windows 8 a while back and kept getting BSODs. Could it be a hard drive problem, or a simple drive upgrade? Im currently working on trying to update all my drivers to see if that will fix it. All help is appreciated.

A:Multiple BSOD errors from multiple drivers, no luck fixing so far

Oh and I replaced the RAM and was still getting BSODs so I put my factory ones back in.

Read other 1 answers
RELEVANCY SCORE 60.4

[EDIT]
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle!

So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or none for a few days. They don't seem to happen because of any application either. They seem to occur randomly.

The error's that appear to be the most common is the 'driver_irql_not_less_or_equal' and the 'memory_managment' error. Others have occurred I just can't remember them. Another problem I've noticed is that my graphics driver would crash occasionally even though it is up to date.

I use my computer as a gaming pc and for video editing so its under some heavy pressure I would presume. Any help would be much appreciated! I attached the event files aswell.

A:Multiple BSOD's with multiple errors occuring randomly

Hello Andy!

► Uninstall the following programs.
Start Menu\Programs\AVG : Replace with Microsoft Security Essentials - Microsoft Windows
Start Menu\Programs\DAEMON Tools Pro
Start Menu\Programs\MagicDisc
Start Menu\Programs\MagicISO
► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Enable Driver Verifier

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C5, {0, 2, 0, fffff800033fc6fb}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+ca7 )

Followup: Pool_corruption
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 60.4

windows 7 x64
- original install on system but i don't have my disks. they are somewhere...
- full retail version installed
- age of the system is approximately 3 years
- age of the install is approximately 2 years

it seems to happen at random but i get BSODs. approximately 2-3 times a day for a week or so. then nothing for a few days. I cannot seem to reproduce it manually.

i've attached my dump files and health report as advised on this site.

i disabled my antivirus before running this set of error reports as a precaution.
any help would be greatly appreciated.

A:BSOD errors. multiple times during multiple programs

Have you recently added any RAM or new hardware to this system?

Uninstall Any Daemon Tools that you have installed. Those are a common reason for BSODs

try these:
SFC /SCANNOW Command - System File Checker

After:
Disk Check

Post back results please.

Read other 5 answers
RELEVANCY SCORE 60.4

Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I replaced it with a new hitachi. After installing windows and running smoothly (updating everything and installing) for several hours, I had a blue screen again. I ran memtest86, and received 0 errors, so I'm assuming it's not my RAM, and because it's a new installation of windows and a new hardrive I'm assuming those aren't the issues. I am planning on taking it in to a shop tomorrow to see if they can diagnose what's malfunctioning, but if someone here can tell enough, then I would appreciate it.

Blue screens happened at multiple temperatures (~20C ~36C)

Blue screen 1 event log (I did not save the first problem signature)

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2013-10-13T17:27:50.558821000Z

EventRecordID 2467

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Pirro

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 26
BugcheckParameter1 0x403... Read more

A:BSOD Multiple times multiple errors 0x0000001A

Hello and welcome, please try the steps below.





Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to... Read more

Read other 1 answers
RELEVANCY SCORE 60.4

Hi,
My laptop suffers from random BSOD's errors. Sometimes, when i push power on button, nothing happens. Screen remains black, you can hear hdd&fan motion, but that's all. Sometimes it crashed during loading Windows 7, and sometimes i get BSOD's while running windows. When i tried to run memtest86 it crashed after ~1min multiple times. After changing to other 2x2gb, situation is still the same. I aslo tried to swap hdd, but it didn't help. I really don't know what's going on. I appreciate if you can help me.

I attached Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML file in zip file.

A:Multiple BSODs, random errors

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so y... Read more

Read other 2 answers
RELEVANCY SCORE 59.6

I have Malwarebytes, SUPERAntiSpyware and STOPzilla. I have run all of these and each have found multiple things, which I have chosen to fix. I am running Windows XP SPk 3 32-bit and IE 8.0.6. I have downloaded TDSSKiller to my desktop based on suggestions to another similar post. I have attempted to run it but it will not run. I have even renamed it and tried to run it but it will not run.
I have cleared all my caches and temp files, and still I keep getting the script errors and random audio.

What should I do next?

Read other answers
RELEVANCY SCORE 59.6

I hope someone can help. I have been recieving many random (to me) BSOD's.

The (Two month old) laptop gets so many that it cannot be booted into any Windows mode (including safe mode). My only option is to restore the PC using HP's F11 (factory restore).

I have managed to capture two .dmp files, and have attached the relevant items as per the sticky post.

So far I have clocked the following errors:
[STOP 0x000000F4]
[STOP 0X00000019] (BAD_POOL_HEADER)
[STOP 0X000000C4]
[STOP 0X00000050] (PAGE_FAULT_IN_NONPAGED_AREA)


Many Thanks for looking

Details:
Windows 7 64bit (Home Premium) (OEM)
Two month old HP laptop
Few days

A:Multiple BSOD, Multiple STOP errors

Hello Gingbeard,

Symantec is a frequent cause of BSOD's.
I suggest you remove it and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Let us know how you go.

Read other 9 answers
RELEVANCY SCORE 59.6

Hey EightForums,

I am new to you however not new to troubleshooting over forums as I used to run Ubuntu and as you may know that is non-stop forum troubleshooting.

So lets get into this. Having some trouble with my girlfriend's windows 8.1 PC. I've tried doing a system refresh with no luck. The BSOD happens all the time however it happens most frequently while playing the sims4 which I just bought here. I've looked through the dump files and can only find that the kernel appears to be having some issues. I've attached the standard reports from the program in the sticky.

Please advise,

Thanks,
Cbiscuit.

Attachment 54303

A:BSOD multiple errors, multiple situations

Hi CensoredBiscuit & Welcome to the forums ^_^,

Yups, non stop troubleshooting with Linux
I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sun Nov 23 13:08:07.118 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\112314-35911-01.dmp]

Windows 8 Kernel Version 9200 MP (4 procs) Free x64

Built by: 9200.16496.amd64fre.win8_gdr.130108-1504

System Uptime: 0 days 0:02:56.834

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

BugCheck 139, {3, fffff80076428790, fffff800764286e8, 0}
BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)

Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: fffff80076428790, Address of the trap frame for the exception that caused the bugcheck
Arg3: fffff800764286e8, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
BUGCHECK_STR: 0x139

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: CORRUPT_MODULELIST

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sun Nov 23 13:04:38.242 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\112314-35521-01.dmp]

Windows 8 Kernel Version 9200 MP (4 procs) Free x64

Built by: 9200.16496.amd64fre.win8_gdr.130108-1504

System Uptime: 0 days 1:12:14.968

... Read more

Read other 1 answers
RELEVANCY SCORE 59.2

I've been having all kinds of trouble with my 2-yo PC . A month ago I had the Free version of AVG installed and everything was running fine until I upgraded to the latest version. Windows started taking it's sweet time to boot, sometimes it would freeze and I ended up uninstalling it.

System specs:
Windows Vista Ultimate, 64-bit - Service Pack I
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz | LGA775 | 2394/266mhz
8gb RAM
ASUS Mobo

I'm currently getting random shutdowns, once every 2 days or so. Last night it shutdown after I started Fraps. Checked CPU temperature and googled for it's normal temp and it seems to be fine.

Quite frequently the hard drive led seems as if the PC is doing some heavy work. I check ProcessExplorer when this happens to see if there's some weird process causing this but there's nothing.

I ran CCleaner, everything seems ok. Ran startuplite, hijackit, MalwareBytes, Rootkit and nothing suspicious shows up. Except, for a variety of errors @ Event Viewer.

Some of the most recent / common errors:
- TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.
- \SystemRoot\SysWow64\Drivers\TBPanel.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
- The following boot-start or system-start driver(s) failed to load:
atapi
- Code integrity determined that the image hash of a file is not valid. The f... Read more

Read other answers
RELEVANCY SCORE 59.2

I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.

System Info
Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
MOBO ASUSTeK Computer INC. P5G41T-M LX3
BIOS Date: 01/13/11 16:27:43 Ver: 08.00.14
8.00 GB Dual-Channel DDR3 @ 533MHz (8-8-8-20)-Corsair 2x4GB
1024MB NVIDIA GeForce GT 440 (ASUStek Computer Inc)
NVIDIA High Definition Audio, Realtek High Definition Audio
2 Monitors: DELL 1908FP (Digital), Dell 1907FP(Analog) [email protected]
1) Hitachi HDS721050CLA362 ATA Device (2) WDC WD10EACS-00ZJB0 ATA Device (3) WDC WD5000AACS-61M6B2 ATA Device

I am attaching the zip file with Windows_NT6_BSOD_jcgriff2 and PERFMON.html included. I am assuming that the DMP files are included therein.

Please advise if you need more information to help solve this problem. Thank you for your help and wonderful support seen h... Read more

A:Multiple BSOD at Random Times with Multiple Drivers Identified

  
Quote: Originally Posted by a1newman


I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.

System Info
Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
MOBO ASUSTeK Computer INC. P5G41T-M LX3
BIOS Date: 01/13/11 16:27:43 Ver: 08.00.14
8.00 GB Dual-Channel DDR3 @ 533MHz (8-8-8-20)-Corsair 2x4GB
1024MB NVIDIA GeForce GT 440 (ASUStek Computer Inc)
NVIDIA High Definition Audio, Realtek High Definition Audio
2 Monitors: DELL 1908FP (Digital), Dell 1907FP(Analog) [email protected]
1) Hitachi HDS721050CLA362 ATA Device (2) WDC WD10EACS-00ZJB0 ATA Device (3) WDC WD5000AACS-61M6B2 ATA Device

I am attaching the zip file with Windows_NT6_BSOD_jcgriff2 and PERFMON.html included. I am assuming that the DMP files are included therein.

Please advise if you need more information to help solve this pr... Read more

Read other 2 answers
RELEVANCY SCORE 58.8

I had been getting BSODs on an older custom PC so I decided it was time to upgrade and I recently put together a new system and have been having irregular BSOD errors since day 1. I initially thought that it was the RAM because that was the only other part besides the hard drives that was recycled from my old build but I ran memtest for 7 passes and then 10 passes and received no errors. A problem I have also been having is that my RAM will not boot to windows at it's rated speed of 1600mhz and with XMP enabled. I finally got it to boot to 1600 when I increased the timings by 2 or 3 on each but that didn't seem to solve anything. I should've clarified that I get BSOD when the RAM is set to auto or when it's set to manual or anything else in between. I am also able to run Prime95 for about 6 hours along with browsing and gaming with no issues until I BSOD eventually. I've attached the many dump files I've accumulated since I started logging them. The only consistent thing that keeps popping up is ntoskrnl.exe which I doubt to be the actual cause. Hopefully someone can help.

A:BSOD After New System Build, Many Different Types of BSOD Errors.

An update of sorts. It seems my adobe flash player is crashing a lot after extended periods of viewing online videos and streaming. Also in the latest crash dump file in my zip folder my computer would hang and freeze and barely respond and when I looked at the resources panel my cpu was at a constant 100% before it crashed.

Edit: Here's another dump file from another BSOD.

Read other 9 answers
RELEVANCY SCORE 58.4

So since putting together my first Intel build I have been getting all sorts of BSOD errors when booting up my computer. They seem to change pretty often but some of the most common ones have been:

MEMORY_MANAGEMENT
BAD_POOL_HEADER
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

The errors only occur when booting up my computer; once it 'diagnoses' itself I don't seem to have any problems after that, and I never get BSOD on restarts. So far some of the things i've tried:

- Updating all drivers numerous times
- Uninstalling/reinstalling graphics driver in safe mode
- Disabling start-up processes
- Checking BIOS is up to date
- Running disk checks
- Running system file check
- Running virus scans
- Running Windows Memory Diagnostic
- Uninstalling unnecessary software
- Disconnecting external USB devices, as well as network adapter

Then yesterday I noticed that the PC boots up fine with only one ram stick inserted, but I get BSOD when both are inserted. I tried the other stick on its own and again it booted up fine. Then I tried them both together again, but in a different configuration, and I got BSOD. So I ran memtest86 on one of the sticks overnight, and this was the result:

Am I right in thinking that this means the RAM stick is faulty? I am going to run memtest on the other stick tonight.

In the meantime though, I was wondering if anyone could have a look at my logs (attached) and tell me if there's anything else causing the problem?

A:Various BSOD errors on new build

3]Am I right in thinking that this means the RAM stick is faulty? I am going to run memtest on the other stick tonight.



That is right yes, the 0x50 is a bit known for being there when memory problems occur

Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ffffc0000290af28, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff803a952ac12, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000002, (reserved)

Read other 0 answers
RELEVANCY SCORE 58.4

I recently built a new rig for a combination of rendering, video editing, and some gaming. Over the past five days I've had 6 BSoD errors at seemingly random times.

The first error occurred while I was running a game and checking my CPU temperature with a third party app. It read SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

The second two errors occurred right after I booted from the first error (one after the other). I would type in my pin to be greeted by:
MEMORY_MANAGEMENT

I've also run into PFN_LIST_CORRUPT while watching a video.

IRQL_NOT_LESS_OR_EQUAL while my computer was in sleep mode.

And CRITICAL_PROCESS_DIED while running the first time setup for a game.

The files that seem to be repeatedly related to these crashes are hal.dll and especially ntoskrnl.exe (although the first crash also referenced ACPI.sys).

I am running windows 10 with the following specs.
i7-6700k
GeForce GTX 980Ti
16 GB of HyperX Fury DDR4 2666
MSI Krait Gaming Motherboard

The processor is water cooled and there is a decent amount of airflow through the case (plus every time I've checked temperatures they've been below 30c), so I don't think this is an overheating issue.

Things I've tried so far:

sfc/ scannow did not return any errors (I did not do this with an install disc, however, so I don't know if that would change anything).

I did a memory test with Windows Memory Diagnostic (standard test) and it did not return any errors.
Addendum to this: when I tried to ru... Read more

Read other answers
RELEVANCY SCORE 58.4

Hi, relatively new to all this, built a pc, and there are constant errors, the most common of which is Kernel Security Check Failure. Any ideas?

Thanks

A:Various BSOD errors in new build.

Update drivers in red. Uninstall Gigabyte bloatware and start HW testing as this appears to be a HW issue. Memtest first for eight passes per stick please.

Code:
gdrv.sys Fri Mar 13 04:22:29 2009 (49B9D175)
Gigabyte Easy Saver - mobo power utility driver
http://www.carrona.org/drivers/driver.php?id=gdrv.sys

MBfilt64.sys Fri Jul 31 05:40:32 2009 (4A7267B0)
Realtek HiDefinition Audio driver (file labelled as Creative Audio Driver) - Was found in the latest Win8 version available from Realtek on 07Sep2013
http://www.carrona.org/drivers/driver.php?id=MBfilt64.sys

mv_process.sys Tue Feb 22 10:22:20 2011 (4D63804C)
Marvell Semicondutor process notification driver. Most often associated with Marvell Storage Controller drivers
http://www.carrona.org/drivers/driver.php?id=mv_process.sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

mv91cons.sys Wed Jun 6 12:26:38 2012 (4FCF305E)
Marvell 91xx Confige Device Driver for 6G SATA Controller
http://www.carrona.org/drivers/driver.php?id=mv91cons.sys

iaStorA.sys Mon Jan 14 19:00:27 2013 (50F447BB)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

dump_iaStorA.sys Mon Jan 14 19:00:27 2013 (50F447BB)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=... Read more

Read other 1 answers
RELEVANCY SCORE 58

Hello , im having random BSOD issues and after a BSOD i can use my PC again but the problem is it keeps happening randomly and i will be able to use again
Here are some of the errors i have got:
PAGE FAULT IN NON PAGED AREA
BAD or CORRUPTED POOL
MEMORY MANAGMENT
I have the files Windows_NT6_BSOD_jcgriff2 and perfmon files included in this post
System specs
Os: Windows 7 home premium 64 bit
I have bought this about a week ago , i had it built.
Proccesor : AMD FX 6100 Proccesor
gpu :nvidia gtx 560
ram: 8gb
hard drive : 1tb

A:Random BSOD errors happening at random times

Hello, welcome to SevenForums!

I have taken a look at your provided dump files. There are tons of memory management and memory corruption errors. Before we continue, if any of your hardware is overclocked, PLEASE reset your clocks to stock for diagnostic purposes.

First off, before we continue onto memory.... in your drivers list I noticed you have sptd.sys listed, which is the driver for Daemon Tools. Please uninstall Daemon Tools from your system as it's known to cause many issues in the Windows 7 environment. Once you've done so, restart and then run DuplexSecure's sptd uninstaller to fully remove sptd.sys from your system. After you've done so, restart again.

Next, tons and tons of memory management and memory corruption errors as I've said earlier. Please read the following thread to download and install Memtest to test your memory for any bad sticks.

Read other 9 answers