Over 1 million tech questions and answers.

BSOD on Lenovo IdeaPad Y510p, after sleep mode usually

Q: BSOD on Lenovo IdeaPad Y510p, after sleep mode usually

Hello.

I have a Lenovo IdeaPad Y510p and it has erratic BSOD behavior, usually after sleep mode, but not always. Would love to get to the bottom of it and appreciate any help you can provide!

I've attached the necessary file as per the BSOD posting instructions.

Thanks,
Alexander

RELEVANCY SCORE 200
Preferred Solution: BSOD on Lenovo IdeaPad Y510p, after sleep mode usually

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD on Lenovo IdeaPad Y510p, after sleep mode usually

Only 48 Windows Updates installed. Most systems have 60 to 80 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

The memory dumps blame usbccgp.sys, but MSINFO32 lists ks.sys (kernel streaming of video driver)
And this seems to happen during a power down event (such as power off/hibernate/sleep/etc)

Finally, what applications do you delay using Startup Delayer?
What USB devices do you have connected?

I'm concerned about your version of Diskkeeper as it dates from Jan 2013 - well before Win8.1 was released.
Can you update it? If not, please uninstall it while we're troubleshooting.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

You may not find an update for this one, if so, just leave it be:
LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
Lenovo HD Disk Driver
http://www.carrona.org/drivers/driver.php?id=LhdX64.sys

You should be able to find an update for this one:
tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE91F3)
TAP-Win32 Adapter V9 or[br]OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.sys

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Tue Aug 12 00:25:30.146 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\081114-26531-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 1:36:16.953
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe0003cd674a0, ffffd001dccf8930, ffffe0003d130010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe0003cd674a0, Physical Device Object of the stack
Arg3: ffffd001dccf8930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0003d130010, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jul 4 22:01:31.010 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\070414-44625-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:10 days 23:40:53.512
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe000321f9060, ffffd0018027b930, ffffe0002b5505e0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000321f9060, Physical Device Object of the stack
Arg3: ffffd0018027b930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0002b5505e0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jun 10 21:02:35.060 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\061014-40625-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 11:15:43.586
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe0011b5f38e0, fffff803234ee930, ffffe0011b54a9d0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe0011b5f38e0, Physical Device Object of the stack
Arg3: fffff803234ee930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0011b54a9d0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jun 10 09:45:03.973 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\061014-30890-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 11:51:05.778
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe00176425060, ffffd001f47f8930, ffffe0016e87e010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00176425060, Physical Device Object of the stack
Arg3: ffffd001f47f8930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0016e87e010, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Jun 9 21:52:17.011 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\060914-29765-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:1 days 2:46:08.818
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe001684b88e0, ffffd001799a2930, ffffe00185a83250}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe001684b88e0, Physical Device Object of the stack
Arg3: ffffd001799a2930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe00185a83250, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat May 31 17:50:35.977 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\053114-61125-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 5:55:23.782
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe0011e5be060, ffffd0011e91b930, ffffe0011c70a480}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe0011e5be060, Physical Device Object of the stack
Arg3: ffffd0011e91b930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0011c70a480, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat May 24 12:12:08.989 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\052414-57484-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:4 days 22:01:12.795
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by :usbccgp.sys
BugCheck 9F, {3, ffffe001bbfca060, ffffd001f5ff8930, ffffe00204f609d0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe001bbfca060, Physical Device Object of the stack
Arg3: ffffd001f5ff8930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe00204f609d0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 74CN44WW(V3.05)
BIOS Release Date 09/18/2013
Manufacturer LENOVO
Product Name 20217
??????????????????????????????????????????????????????????????????????????????????????``



3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.

Code:
**************************Tue Aug 12 00:25:30.146 2014 (UTC - 4:00)**************************
LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE91F3)
GEARAspiWDM.sys Thu May 3 15:56:17 2012 (4FA2E2E1)
excfs.sys Tue Jan 8 11:00:53 2013 (50EC42B5)
excsd.sys Tue Jan 8 11:00:57 2013 (50EC42B9)
AcpiVpc.sys Sat Feb 16 20:52:02 2013 (512037C2)
ElbyCDIO.sys Mon Mar 4 04:21:51 2013 (513467AF)
btmaux.sys Tue Apr 23 07:28:02 2013 (51767042)
TeeDriverx64.sys Tue Jul 2 14:38:08 2013 (51D31E10)
L1C63x64.sys Tue Jul 16 02:56:31 2013 (51E4EE9F)
rtsuvc.sys Fri Jul 19 03:58:16 2013 (51E8F198)
VClone.sys Wed Jul 24 11:02:55 2013 (51EFEC9F)
iwdbus.sys Wed Jul 24 21:06:12 2013 (51F07A04)
SYMEVENT64x86.SYS Fri Jul 26 22:26:58 2013 (51F32FF2)
SRTSPX64.SYS Fri Jul 26 22:45:06 2013 (51F33432)
Ironx64.SYS Mon Jul 29 20:59:35 2013 (51F70FF7)
SYMDS64.SYS Tue Jul 30 19:29:08 2013 (51F84C44)
dump_iaStorA.sys Thu Aug 1 21:39:52 2013 (51FB0DE8)
iaStorA.sys Thu Aug 1 21:39:52 2013 (51FB0DE8)
btmhsf.sys Mon Aug 19 04:21:07 2013 (5211D573)
igdkmd64.sys Mon Aug 19 19:08:25 2013 (5212A569)
intelppm.sys Thu Aug 22 04:46:35 2013 (5215CFEB)
EX64.SYS Thu Aug 22 16:36:51 2013 (52167663)
ENG64.SYS Thu Aug 22 16:38:20 2013 (521676BC)
RTKVHD64.sys Fri Aug 30 08:59:57 2013 (5220974D)
ibtusb.sys Tue Sep 10 14:07:42 2013 (522F5FEE)
SynTP.sys Tue Sep 17 21:47:41 2013 (5239063D)
Smb_driver_Intel.sys Tue Sep 17 21:50:21 2013 (523906DD)
ccSetx64.sys Mon Sep 23 23:58:04 2013 (52410DCC)
nvlddmkm.sys Mon Oct 28 17:38:03 2013 (526ED93B)
nvpciflt.sys Mon Oct 28 17:38:28 2013 (526ED954)
NETwbw02.sys Thu Oct 31 12:37:18 2013 (5272873E)
nvvad64v.sys Wed Dec 4 18:10:01 2013 (529FB649)
SRTSP64.SYS Mon Feb 10 18:04:55 2014 (52F95B17)
SYMNETS.SYS Thu Feb 13 06:25:14 2014 (52FCAB9A)
SYMEFA64.SYS Thu Feb 27 18:32:07 2014 (530FCAF7)
IDSvia64.sys Tue Mar 4 23:30:47 2014 (5316A877)
eeCtrl64.sys Thu Mar 20 12:30:59 2014 (532B17C3)
EraserUtilRebootDrv.sys Thu Mar 20 12:30:59 2014 (532B17C3)
BHDrvx64.sys Tue May 6 03:04:20 2014 (53688974)
SbieDrv.sys Thu May 29 14:16:25 2014 (53877979)
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jun 10 21:02:35.060 2014 (UTC - 4:00)**************************
eeCtrl64.sys Wed Oct 9 16:50:19 2013 (5255C18B)
SbieDrv.sys Fri Jan 17 14:00:36 2014 (52D97DD4)
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat May 24 12:12:08.989 2014 (UTC - 4:00)**************************
EraserUtilRebootDrv.sys Wed Oct 9 16:50:19 2013 (5255C18B)



http://www.carrona.org/drivers/driver.php?id=LhdX64.sys
http://www.carrona.org/drivers/driver.php?id=tap0901.sys
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=excfs.sys
http://www.carrona.org/drivers/driver.php?id=excsd.sys
http://www.carrona.org/drivers/driver.php?id=AcpiVpc.sys
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys
http://www.carrona.org/drivers/driver.php?id=btmaux.sys
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys
http://www.carrona.org/drivers/driver.php?id=L1C63x64.sys
http://www.carrona.org/drivers/driver.php?id=rtsuvc.sys
http://www.carrona.org/drivers/driver.php?id=VClone.sys
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS
http://www.carrona.org/drivers/driver.php?id=SRTSPX64.SYS
http://www.carrona.org/drivers/driver.php?id=Ironx64.SYS
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS
http://www.carrona.org/drivers/driver.php?id=dump_iaStorA.sys
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys
http://www.carrona.org/drivers/driver.php?id=btmhsf.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=EX64.SYS
http://www.carrona.org/drivers/driver.php?id=ENG64.SYS
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=ibtusb.sys
http://www.carrona.org/drivers/driver.php?id=SynTP.sys
http://www.carrona.org/drivers/driver.php?id=Smb_driver_Intel.sys
http://www.carrona.org/drivers/driver.php?id=ccSetx64.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=nvpciflt.sys
http://www.carrona.org/drivers/driver.php?id=NETwbw02.sys
http://www.carrona.org/drivers/driver.php?id=nvvad64v.sys
http://www.carrona.org/drivers/driver.php?id=SRTSP64.SYS
http://www.carrona.org/drivers/driver.php?id=SYMNETS.SYS
http://www.carrona.org/drivers/driver.php?id=SYMEFA64.SYS
http://www.carrona.org/drivers/driver.php?id=IDSvia64.sys
http://www.carrona.org/drivers/driver.php?id=eeCtrl64.sys
http://www.carrona.org/drivers/driver.php?id=EraserUtilRebootDrv.sys
http://www.carrona.org/drivers/driver.php?id=BHDrvx64.sys
http://www.carrona.org/drivers/driver.php?id=SbieDrv.sys
http://www.carrona.org/drivers/driver.php?id=eeCtrl64.sys
http://www.carrona.org/drivers/driver.php?id=SbieDrv.sys
http://www.carrona.org/drivers/driver.php?id=EraserUtilRebootDrv.sys

Read other 11 answers
RELEVANCY SCORE 96.8

Hi, Shouldn't it be possible to reactivate this laptop from sleep mode with a bluetooth keyboard / mouse? I have another laptop and it starts up from sleep mode when i press any key or move the mouse. Are there any preferences for this in Windows or in the BIOS?  Kind regardsKristian

Read other answers
RELEVANCY SCORE 92

What is Lenovo IdeaPad y 580 keyboard key type is it ic12 or ic20 or ic47

Read other answers
RELEVANCY SCORE 84.4

Hello, unfortunatly I've got a problem with my new Lenovo laptop. I can put it to sleep just once while using power button. If i wanted to do it again I have to reboot my computer. While using sleep mode in windows, everything goes smoothly. I've checked my power management options, and everything seems fine. Does anybody know solution?

Read other answers
RELEVANCY SCORE 82.4

I am having a sleep mode problem on 100 15IBD.  If I step away for 10 seconds it goes to sleep mode.  I have fixed all the power options and it still continues. It appears there is a fix for this (I have lost that at the moment) but I was concerned about the BIOS.  Is that important?  Does that matter for the update?  I can tell you what the BIOS is if necessary. I just do not want to screw up the laptop.  I am sure many of you know what I mean. Thanks.

Read other answers
RELEVANCY SCORE 82.4

Greetings! I recently bought a new laptop, Lenovo IdeaPad Y700 15-ISK, with Windows 10 Home preloaded. I found a minor problem that happens frequently. After the laptop is idled for a period of time, 5 or 10 mins depending on plugged in or not as you know, the laptop first turns off display, then goes into sleep mode after another 5 or 10 mins. The problem is, after I come back and try to turn it back on, the screen stays black. However, I can see that the laptop is indeed responding by pressing NumLock, CapLock, or in my case, Fn-Space to turn on/off the backlight of keyboard. I checked and I have the latest windows updates and latest drivers for everything. So, any brilliant idea on this issue? Thanks in advanced.










Solved!
Go to Solution.

A:Lenovo IdeaPad Y700 15-ISK - Sleep mode problem

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y700-No-power-no-display/td-p/2228277 Does it goes to normal after reset? If yes turn off hibernate mode as soon as possible!!! you will find a way to do it in the thread above. If it doesn't go back to normal and you are stuck with a brick then the only solution is to send it for a warranty repair. There is a bug in the bios which causes that.

Read other 2 answers
RELEVANCY SCORE 82.4

i have the ideadpad 300-15isk running windows 10.often when i open the computer after sleep mode the screen won't turn back on.after the computer was in sleep mode and i open it i can see and hear it working but no matter what the screen stays off.the only soltion is a hard reset- pressing the power button until it shuts down and then restarting.how can i solve this problem? thank you

Read other answers
RELEVANCY SCORE 82.4

i have the ideadpad 300-15isk running windows 10.often when i open the computer after sleep mode the screen won't turn back on.after the computer was in sleep mode and i open it i can see and hear it working but no matter what the screen stays off.the only soltion is a hard reset- pressing the power button until it shuts down and then restarting.how can i solve this problem? thank you

A:Lenovo IdeaPad 300 15ISK - Sleep mode recovery pro...

Simply disable the ?Wake on pattern match? setting under the network adaptors advanced properties tabcredit to :http://jack.ukleja.com/fix-for-windows-7-random-wake-from-sleep-problem/

Read other 2 answers
RELEVANCY SCORE 82.4

Greetings All, My Lenovo Ideapad 100 15IBY running on windows 8 OS won't wake up from sleep mode as it automatically boots into sleep mode when powered on and the screen remains blank. I have tried reseating the ram, power on with ac adapter and also holding on the power button for a while but still no sign of waking up. The screen is perfectly Ok. The only problem is that the heat sinks gets hot than normal. Please kindly provide any fix or solution to this. Thanks

Read other answers
RELEVANCY SCORE 81.6

Hello, I have an Ideapad 510S13ISK on Windows 10 bought less than a year ago.After installing the Updates for windows (Version 1709) on December my pc started not to wake up from sleep mode, neither closing and opening the screen nor trying to wake it up using the power or any other key.I tried previously to update all drivers from Lenovo's support site.Then i tried to use a restor point created before the Windows Updates, but they still remained installed.At that point i reset the pc using the reset option by windows but the problem was still present.I updated again all drivers after the reset but nothing, it doesn't wake up. Precisely the pc seems to wake up but the screen doesn't, and it "flashes". Here a video of the probem: https://www.youtube.com/watch?v=LntcxCrlZqQ I'm sorry for my english, hope you understand. Kind regards. Marco

Read other answers
RELEVANCY SCORE 80.8

my lonove idea pad 100-15IBY JUST WONT TURN ON, there are 2 lights flashing on the laptop indicating that it is in sleep mode, when i plug the charger the charge light indcates that it is charging. if i press the power button the light goes into a solid state for a few seconds and then it just goes back to flasing again. i have have removed the internal battery hoping it will reboot nothing, i have tried to use the one key recovery button located on the side, but nothing. i have removed rams, CMOS BATTERY BUT NOTHING.  the laptop is out of warranty and i rally need it to work, i am a student and dont have much money to fix it, i use this laptop on a daily basis and my work is now stuck on it pls help...

Read other answers
RELEVANCY SCORE 80.8

in sleep mode in about 5-6 hours battery lost almost full capacity !!BIOS upgraded, drivers too.

Read other answers
RELEVANCY SCORE 75.6

I've had my Ideapad y510p for about 2 years and recently the charger stopped working.  At first it just needed to be re-plugged in, then it needed to be plugged it at weird angles and held up to charge, then it had to be in the exact right position, with no motion.  Then it just stopped charging.   From what I've read it sounds like this may be a problem with the port, not the charger, but I've tried using a charger that fits my computer but isn't the right voltage/wattage (or w/e) and it will charge for a time, then stop, then continue to charge if I plug it into a new socket. I tested it by taking out the battery and turning it on: with the inappropriate charger, it'll still work, with the old charger, it won't turn on.   As far as I can tell, there's no physical damage to the charger, though it's possible it might have been dropped or mishandled when traveling with it.  I know for a fact I've dropped my computer several times, but I've never had charging problems immediate after, and all those instances were a good while back.   So is it more likely that my computer is the problem, or just the charger?  I still have the warranty on my laptop; if that's the problem, can I get it fixed?

Read other answers
RELEVANCY SCORE 75.6

Hi, I got my new Lenovo Ideapad y510p for a month ago, and  three weeks after it started acting wierd by having a slow startup and sometimes it just had black screen when it was starting up. Sometimes I have to hold down the  power and try several times to turn on the computer. When it do start up, at the begining (after the lenovo logo) it makes some black screen switching (not sure if it correct way to describe it), and then it take ages for it to get on the login screen, and get on desktop, its like it doesn't have an SDD. Any help?  













Solved!

Go to Solution.

A:Problems with Lenovo Ideapad y510p

Hi Zenadbeg,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your Y510p laptop is not working as expected and takes long time to boot into Windows, below are the steps to check and resolve the issue in the computer:
 

Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
If the issue persists even after performing Flee Power then resetting BIOS to its defaults should resolve the issue
To access the BIOS menu click the NOVO button which at the left-hand side of the computer next to AC power adapter jack.
Then to reset the BIOS to its defaults click on ?F9? Key and select YES.
Now Click on ?F10? Key to safe the changes that are done in BIOS, restart the computer and check if the issue is resolved.

Hope this helps!!!
 
Do post us back if the issue persists.
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 75.6

Hello guys,  I bought my Lenovo y510p for months ago, tried with several SLI games to run those. They all crash, and returns the screendriver has stopped working. I have the y510p with GT 755m sli. Any solution for this?? If I run without SLI all is working good.   

A:Lenovo ideapad Y510p SLI Crashing

Have you updated your video card drivers with the latest drivers from the Nvidia website?  Have you monitored your GPU temperatures to see if either of your GPUs are overheating?  You can try using GPU-Z to monitor your GPUs while gaming.

Read other 9 answers
RELEVANCY SCORE 75.6

Hi.I am considering buying Lenovo IdeaPad Y510p,to be more specific I want exactly this model from newegg.com. This model has 5400rpm 1tb HDD which in my personal opinion is not good enough for this laptop so I was planning to upgrade it to SSD but I am not if this is possible to remove the existing HDD and replace is with my SSD as I see no HDD bay on the back of the laptop,the manual also provides no information on how to acess the HDD. There is also no information on the size of the hard disk drive on this model,is it a regular 2.5" HDD or are they using other size drive..? I have chatted with a few representatives online,but they could not provide any specific information,one of them told me that this is possible,the other one said it is not.I hope someone can provide detailed information on this matter.Thank you. 













Solved!

Go to Solution.

A:Lenovo IdeaPad Y510p HDD Question.

hi quick5and,
 
Welcome to the Forums.
 
The official Ideapad Y510p specs sheet has not been released yet but the 1TB HDD is a regular 2.5" SATA HDD (same as the Y500, see page 38-40 of the hardware maintenance manual on how to access the HDD)
 
Other SKU of the Y510p, like this merchant, sells a hybrid 2.5" drhve (sample specs here)
 
As for upgrading the HDD to SSD, you may want to check Crucial's SSD upgrade for the Y510p or go with an mSATA drive (according to these reviews, the Y510p uses an M.2 (formally NGFF) mSATA drive).
 
Please check this pdf data sheet in the future as it will enlist the official specs for the Y510p.
 
 
Best regards,
neokenchi
 

Read other 8 answers
RELEVANCY SCORE 74.8

Hello fellow Lenovo users, i will start by saying having been a Lenovo brand user since my X41 in 2006 and having purchased over 8 laptops from the brand based on the rich experiences i have had over the years i am really disapointed at my Y510p i purchased a few years ago. After ownership of 6months i started to notice the screen would flicker as stated by hundreds of other owners.(just type Y510p screen flicker into youtube and see for yourself) I am sure this issue is not new to you  and there are many posts about this. After contact with customer services who constantly tell me it is driver/software related, which it clearly is not i would like to ask why such a prestigious brand such as Lenovo will not admit that this model was shipped with a design fault? I understand that there would be expense involved but after being an avid fan of Lenovo for over 15 years and having purchased over 13 products from tablets for my kids to phones for my wife and the new laptop i buy every 2 years for work, this is small fry. I can never buy another machine from you again now as i have lost all faith in your design/testing and the lack of willingness to accept liability when so many units have the issue makes me sad. This has become a bit of a rant, which i know is not what he forum is about but i feel people should know all the details about a company ethos before they spend their hard earned money on a sub standard machine. (at least in the Y510p)&nb... Read more

Read other answers
RELEVANCY SCORE 74.8

Hello, where i can get recovery media for my Lenovo Y510P laptop, when my recovery partition is damaged. Can anybody help me? Does anybody have original Recovery disc or someting, where i can install clean OS? If you can help me, please contact me. Its possiable that we can share media with Google Drive or someting. Thank You!Contact: Email: [email protected]  

A:Lenovo Ideapad Y510P: How to get recovery media?

If you mean the factory recovery files try Lenovo for a recovery disc set if available. If you mean for the OS alone just download the MEDIA CREATION TOOL from microsoft which you will use to download the OS installer. As to drivers go to the download site for your unit to download them.

Read other 3 answers
RELEVANCY SCORE 74.8

Hello! I have had this problem for a LONG time now, and it is getting very frustrating now. Whenever my screen has a large area of a dark color, my whole display begins to glitch out and flicker. Not only do I have this problem, but there is a problem where there are pink and green areas covering places where it shouldn't be, if that makes any sense, I don't know how to explain it. I have tried so many ways to fix it, but none have worked. I had reinstalled my drivers MULTIPLE times, I had sent it back to Lenovo for repairs, I had unplugged some cables that people had said would fix it, but still, the problem still persists. I do not know what could fix this, and it is so aggravating! It seems like everyone who had this issue as well can never get it fixed either, and their thread gets suppressed and never to be heard from again... any help is appreciated at this point, I can't even bear to look at my laptop screen anymore because the flashing and flickering irritates my eyes. This seems like a problem with ALL y510p's, and I don't understand why anything can be done about it. Thanks in advanced.

Read other answers
RELEVANCY SCORE 74.8

Hello.I am the owner Lenovo IdaePad y510p Intel i5 4200m.Not so long ago I bought a i7 processor 4810MQ.Both the i5 4200m and i7 4810MQ work on the Socket G3 also known as RPG 946B/947 or FCPGA 946 but with the difference that the intel i5 4200m has a TDP of 37W and Intel i7 4810MQ has a TDP of 57W.So after update the BIOS to version 3.08 willingly I took up the replacement processor.To my surprise, after an exchange with i5 to i7 4200m 4810MQ laptop will not turn on, for a short time (1 to 3 seconds) shone on the white button "power" but immediately afterwards extinguished.I suspect that it is a voltage input to the processor, but the BIOS is not possible because the feature voltage change is not visible / hidden. I hit it on:https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-white...but it seems to me such output last resort, and I wanted to ask what to do now.I do not want to believe that the 300W power supply does not could handle the additional 20W per processor.What to do in my Lenovo IdeaPad y510p to use Intel i7 4810MQ?I'm sorry for his handling of English who constantly grind.Thanks!!!

Read other answers
RELEVANCY SCORE 74.8

So since christmas is coming, I was thinking it would be cool to upgrade my 8gb RAm to 16gb My question is: what kind of memy card I need to my lenovo ideapad y510p? and do I need to change my old memory card aswell if im buying new one? Also is it easy to change those RAM cards ?











Solved!
Go to Solution.

A:Lenovo Ideapad y510p - memory upgrade

They're RAM sticks, not cards, and they're fairly easy to change out. I would suggest looking for something in the 1866mhz speed, though I think you need lower voltage memory. So I'd get something 1.35v or lower.




___________________________________________________________________________________________________________________Lenovo Ideapad Y500 | IntelŽ Core? I7-3630M @2.4GHz | 8GB 1600MHz DDR3 RAM | NvidiaŽ Geforce? GT 750M | 120GB Mushkin Atlas Deluxe mSATA SSD | 1TB Samsung Spinpoint M8 5400RPM HDD | 1080p Lenovo Display | IntelŽ Dual Band Wireless-AC 7260

Read other 9 answers
RELEVANCY SCORE 74.8

SO ever since last week ive been getting random blue lines when i startup. I check Devicemanager and there it is. it shows my nVidia GeForce 755m with a yellow triangle with an exclamation. Clicking properties would show "windows has stopped this device code 43". I look on the forums and find some solutions that tell me to uninstall my card and i did.  still nothing. still blue lines on my screen. I've pretty much given up at this point and im submitting to the forums. My Ultrabay card just wouldn't work. Now ive resorted to unplugging it and just using the intel integrated graphics card. 

Read other answers
RELEVANCY SCORE 74.8

I am currently having trouble disabling hyperthreading on my Lenovo Ideapad Y510P. The reason for this is because Rainbow Six Siege crashes constantly and most Reddit posts have suggested to turn it off. I have tried various solutions, but none of them have really worked. I have tried turning my cores up to four and higher and yet no luck. I cannot find hyperthreading in the BIOS setup screen. In-depth specs for my laptop will be put below. If additional information is needed, please reply. Thank you. Edition: Windows 10 HomeVersion: 1703OS Build: 15063.726Product ID: 00-326-10000-00000-AA563Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHzSystem Type: 64-bit operating system, x64-based processor

Read other answers
RELEVANCY SCORE 74

From about 3 weeks ago, my Lenovo Y510p (GT 750M Sli, purchased in 2013) started to make this weird grinding/buzzing sound at random times on the CPU side of the fan. It was barely noticeable if I had headphones on at first, but starting from the second week the noise and vibration of it grew louder. After doing some research for possible fixes, I have tried the method openining Energy Management and running the Dust Removal feature to temporary solve the problem. However, that method only worked for about a week, and starting from the third week the buzzing remains very consistent even after I run Dust Removal several times. Does anyone here know what is the problem exactly? I know for other models, people have been able to solve the problem by updating their BIO driver provided by the website. But all Y510p users seen to have that problem early enough to just get a refund or send it back for exchange/repairment using their then still active warranty. I would like to know if there's any way that I can fix this without having to spend money for the fix when it is proven it is the company side issue since even fresh new purchases of the same model ran into the same exact problem within days. 

A:Lenovo IdeaPad Y510P CPU side Buzzing Noise

Bump. (Not sure if we allowed to bump here, if not I apologize)

Read other 2 answers
RELEVANCY SCORE 74

This has been an exhausting day! I've been trying to figure this out for quite awhile.

To start, I'll post some information.

My webcam was working fine yesterday! I tried doing a system reboot to the the week before that and alas the issue prevailed. My internal webcam is not being registered by my laptop!

So the solution that seemed obvious enough was to check my drivers, update them if necessary. Which I ended up doing. Alas, the issue prevailed.

Checking the device status, I received the error "Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer." The device is currently registered as 'Unknown device' as I uninstalled the driver. I was receiving the same error when I did have the original drivers though.
Looking up what the error means, it meant that the device was disconnected. I'm not entirely sure how this could happen though with an internal laptop. I also need to get a new copy of the drivers (Which don't seem to be registering the device upon installation).

Anyway any help would be appreciated as this has become a huge headache for me, and i just want to skype with my friend!
 

A:Need help with internal webcam drivers for Lenovo Ideapad y510p.

It might be that the webcam has failed if everything else has been tried.you can take it somewhere and have it looked at but im not even sure they can be fixed when they go. it might be cheaper just to get an external webcam such as a logitech.
 

Read other 1 answers
RELEVANCY SCORE 74

I have a lenovo ideapad y510p and everything was fine until for I thought I'd do the battery reset in the lenovo energy management,at first the battery was dead and laptop wouldnt turn on,,I found one way around this which is that first I take the battery out and then insert the ac adapter,the laptop turns on then I put it in hibernate while I insert battery after which it seems to charge but only after I do these steps,but if I take the adapter out and insert it back in,it would stop charging.this is all because of the lenovo energy management software battery reset.I've uninstalled it but it doesnt work.any suggestions?I'm guessing one of the steps after full charge during the battery reset the battery gets drained where it says "plugged in and not charging" until it reaches zero is the problem.

A:lenovo ideapad y510p ac adapter battery problems

 

Read other 8 answers
RELEVANCY SCORE 74

Hello, I have a ?Y510P Leonovo Ideapad? and found out, that the mainboard contains an empty port-connector labeled with ?SSD?. A picture of this connector is in the attached image. I am planning to upgrade the Laptop with an SSD-card to improve system speed. Within this context I have a couple of questions, regarding the specifications of this port and suitable SSD-cards: Does this port both accept SATA as well as PCIe SSD-cards?Is there a limitation on the maximum memory-size of the installed SSD-card? Can I install a 256GB SSD-card? (For example ?Transcend MTS400 256GB SSD?) ?Can I partition the SSD-card in a way to fully install Windows 10 on it, making it the boot partition. The SSD-card should then be visible as a standard drive C:\ under Windows.Can I also install a second operating system (Linux) onto a second partition on the SSD-card, making it a dual boot system?I would be very happy, if anyone could help me with these questions, so that I can upgrade the laptop with the appropriate SSD-card and configuration. Thanks in advance,electron8000


























2017_09_24_13_49_56_ProShot.jpg ?1680 KB

Read other answers
RELEVANCY SCORE 74

Hello, I only found out after purchasing the Y510P laptop that it for some strange reason does not support 5Ghz networks, only 2.4Ghz. This results in me having insanely slow connection every single night around peak hours (7-11pm), and I'm unable to do anything like watching movies, playing games or download stuff. Does anyone know exactly how to upgrade the wireless card on this laptop so it supports 5Ghz networks? Do I have to go out and buy another wireless card, or is it software upgrades like drivers only? I'm not a computer major so a walkthrough would be appreciated. Thanks.

Read other answers
RELEVANCY SCORE 73.2

Hi,  My ~3 year old ideapad purchased from Newegg seems to have gone south. I have Windows 8.1 installed. Last night I shut it off to bring it to class and when I got to class and tried to boot up, it wouldn't finish starting up, would sit at the logo screen for about 30 seconds before shutting down and starting over. The fans power up like it is going to start. It repeats this loop indefinitely. I tried holding the reset button next to the charger port and still nothing.  Suggestions?  Thanks 

Read other answers
RELEVANCY SCORE 73.2

Hi, when I try to boot up the laptop its goes past the lenovo screen onto the screen where you select your profile, it automatically selects my profile, then after this screen it's just black, I can see the bottom bar and the cursor but I cant click anything or do anything. I've tried a few things I've seen online to try sort this problem but nothing, and when I try to factory reset the laptop I press the lenovo button on the side of the laptop, select system recovery and it does nothing it just boosts the laptop up back to the black screen any help would be appreciated thanks.

Read other answers
RELEVANCY SCORE 73.2

I'm running my Lenovo ideapad y510p with Windows 10 64-bit operating system and tried to get miracast working on the computer. Miracast needs NDIS 6.40 suppurted wifi drivers and it seems that my computer only has NDIS 6.30. As I have understand, 6.40 support should be available, but Lenovo dosen't have any drivers that I can see with NDIS 6.40 support. My wifi is Intel centrino wireless-N 2230 running driver version 15.18.0.1 from 30.4.2015. Can found any newer drivers. How to fix this, or is Lenovo once again laking up to date drivers in their computers? Name NdisVersion---- -----------Ethernet 6.30Wi-Fi 6.30Bluetooth Network Connection 6.30

Read other answers
RELEVANCY SCORE 73.2

Hi all,Recently i've noticed my Y510P had high temperatures whilst gaming. (90C on 4700MQ and 98C on both GT755's) so i decided to replace the thermal paste.The problem is that when i press the power button, only the power led goes on, nothing else happens. No fans spin, no screen, no keyboard light, etc.What i've tried:Unplug the battery and try to boot with chargerTake out 2nd gpuReseated everythingTried external monitorHeld the power button down for 60sReseated the CPUTurning it on without RAMTurning it on without SSDStill nothing happens, anyone got an idea?

Read other answers
RELEVANCY SCORE 73.2

Hi all,Recently i've noticed my Y510P had high temperatures whilst gaming. (90C on 4700MQ and 98C on both GT755's) so i decided to replace the thermal paste.The problem is that when i press the power button, only the power led goes on, nothing else happens. No fans spin, no screen, no keyboard light, etc.What i've tried:Unplug the battery and try to boot with chargerTake out 2nd gpuReseated everythingTried external monitorHeld the power button down for 60sReseated the CPUTurning it on without RAMTurning it on without SSDStill nothing happens, anyone got an idea?

Read other answers
RELEVANCY SCORE 72.4

Hello all, could someone have a look at my dmp files. Although windbg points in the direction of PCI.SYS causing the stop errors, my knowlegde is far from sufficient to take the next step. When the laptop goes into sleep or hibernation mode, it crashes. Pretty consistent. Problem was introduced after an huge automatic update but this is something I realesed myself later. Thank you!

A:BSOD pci.sys error everytime after sleep mode Lenovo T420

Welcome

The BSoD seems to be caused by the older drivers of your Intel(R) Wireless WiFi Link Adapter driver


Code:
0: kd> !irp fffffa800bc8b630
Irp is active with 4 stacks 2 is current (= 0xfffffa800bc8b748)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800a2ce050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64
Args: 00015500 00000000 00000005 00000003
[ 16, 2] 0 e1 fffffa800a027c70 00000000 fffff800038c8200-fffffa800b348ab0 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00015500 00000000 00000005 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800b348ab0

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm NETwNs64
start end module name
fffff880`05cdc000 fffff880`0655e000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Mon May 02 03:33:01 2011 (4DBDD18D)
CheckSum: 0083E... Read more

Read other 9 answers
RELEVANCY SCORE 72.4

I would greatly appreciate any help in solving what is a pesky BSOD, after a new Win7 Ultimate 64 bit installation, from Lenovo Rescue Disks.

I have owned the laptop for several years, with no BSOD problems. The new install was after Lenovo had updated their drivers for rescue disks for the very fast Lenovo W520.

As instructed, I am attaching for upload my System Information file, and the SF Diagnostic Tool info.

Help is greatly appreciate!

Thanks!

Richard D

System: Lenovo W520, Corsair 16GB ram, Samsung 1TB 540, details in file

A:BSOD When Coming Out of Sleep Mode, After New Install Lenovo W520

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Also update the display driver. Drivers - Download NVIDIA Drivers

Let us know the results.

Read other 1 answers
RELEVANCY SCORE 71.6

Hi, My lenovo IdeaPad Y510p laptop is showing the light on the power button but does not get started. I even tried removing the battery and running the laptop only on power cord but still the problem persists. It seems that the laptop is not getting booted at all but will keep on showing the light on the power button of the laptop. Pleaes let me know what is supposed to be done.It has been just two months since I bought this laptop and it was working fine earlier. Thanks for your quick reply.  

A:Lenovo Ideapad Y510p laptop not booting but showing light on power button

Hi Harsh,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that your Y510p Laptop is not turning ON. I suggest you to perform the Flee-Power, below are the steps to perform the same:
 

Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.

If the issue persists even after performing Flee-Power, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
 
Click here to open a link where you can select the country and get the exact contact support number. I?m sure they will be a great help.
 
Do post us back for further queries.
 
Best Regards
Shiva Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 7 answers
RELEVANCY SCORE 70

As I explained in another thread. When I attempt to boot into Safe Mode, only a black screen appears and rarely the safe mode background flashes for a second. I'm able to move my cursor around, but that's it. I do not understand why this is happening and what I can do to remedy this situation. I would appreciate any type of help. Thank you. 

A:Lenovo y510p Windows 8.1 Safe mode won't boot.

I'm wondering if the graphics adapter used on the computer is not compatible with the generic VGA drive Windows 8.1 uses for safe mode. Has the driver for the graphics adapter ever been updated? I noticed this on the specs. If you have the model with the two adapters, it's possible they conflict with the safe mode video driver. I saw a post where the computer had both an Intel and Nvidia adapter.
Dual (2x) NVIDIA® GeForce® GT755M 2GB (on select models) via Ultrabay
Single (1x) NVIDIA® GeForce® GT755M 2GB
I'm not sure it would make a difference but what happens when you disable Secure Boot and Fast Boot in BIOS. Does it let you access safe mode then?

Read other 4 answers
RELEVANCY SCORE 66

Hi folks I'm new to the forums to please excuse me. I'm currently posting from my phone so when my laptop comes on I'll attach the debug file.

Basically I set my laptop to sleep instead of shutting it down and when I went back to resume my work (about 20 hours later) it was running very slow.

I was searching for my 'Calculator' but made a typo so I tried backspacing the letter but nothing happened. Chrome (which I had opened at the time) was unresponsive and so was my taskbar.

I waited a while to see if anything would happen but nothing did so I forced shut down.

I left it off for almost a half hour and when I put it on I got that error 'Unmountable_Boot_Volume' and it needed to restart and so it did but then the error came up again this time it did an automatic repair which lasted a few seconds then it was diagnosing which lasted a few seconds and then I got the following message:

Automatic Repair
Your PC did not start correctly.
Press restart to restart your PC which might sometimes fix the problem. You can also press Advance options to try other options to repair your PC.

I clicked restart and it did.. I got a black screen for a minute or two but I got to log in. But once again everything was moving slow so as the start menu seemed to be working I shut down the laptop. (It's currently off)

Can anyone assist me with this problem?
It would be really good if I can actually find out what's really wrong with my laptop.
Thanks.

P.S. See attachment

A:BSOD Unmountable_Boot_Volume Lenovo Y510P

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

For this crash, I suggest you follow the tutorial below for troubleshooting.
If you have any question, please ask them.
Troubleshooting stop 0x7B and stop 0xED. - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 66

BSOD-xperts:
I've suddenly been afflicted with BSOD's on my Lenovo Y510P running Win 8.1. Everything was fine until about 2 weeks ago and then I started experiencing multiple BSOD's to the point that I had to boot in SafeMode. After doing some research, it looked like the issues were related to video (NVIDIA GeForce GT 750M) and wireless/bluetooth drivers. I upgraded all of those and everything was fine for a week until this morning when I got another BSOD. After looking for the bug check that it reported, I stumbled on this forum and saw some excellent responses so I thought I'd give it a whirl. I downloaded BlueScreenView and ran that and I've attached the output. I have also attached output from the MiniToolBox tool. I also tried to upload the mini-dump files but I get a message saying I'm "not permitted to upload this kind of file" but I'm happy to do so if I'm allowed to.  Here is a link the output from the Speecy tool as well - http://speccy.piriform.com/results/j7BzfFXyiX3xHgrhWQqHjXV. Would someone be so kind as to give it a look and let me know your thoughts? Thanks!
 

 

A:BSOD in Windows 8.1/Lenovo Y510P

Can you please upload the whole minidump so I can examine it?
 
It is located in C:\windows\minidumps. Select the most recently created file.

Read other 3 answers
RELEVANCY SCORE 66

Will the laptop charge and work like normal if I use the 120w charger instead of a 170w one?  Or do I need the 170w charger whether I want to game or not? I dont want to remove my SLI card. 

Read other answers
RELEVANCY SCORE 65.6

When i close the lid or turn off the laptop the first time, it is fine, and goes to sleep and i can wake it up again. But the second time i do it, the power light stays on and doesn't blink like it shoud, and when i try to awake it, it doesn't wake up, but i still cannot hear the hard drive, the screen doesn't turn on. I have tried turning on or off Hybrid sleep, resetting the laptop, closing the lid slower, closing the lid faster, every time, it just freezes and i have to hard reset it. The laptop is only 1 day old, and has an almost fresh install of Windows 7, with Minecraft, Firefox, Speedfan and Ultradefrag installed. I tried searching online, but i found apsolutely nothing. And sorry for my bad English in some areas, english is not my main language

Read other answers
RELEVANCY SCORE 65.6

Hello, unfortunatly I've got a problem with my new Lenovo laptop. I can put it to sleep just once while using power button. If i wanted to do it again I have to reboot my computer. While using sleep mode in windows, everything goes smoothly. I've checked my power management options, and everything seems fine. Does anybody know solution?

Read other answers
RELEVANCY SCORE 65.2

Hello folks, I hope to find finaly a solution with you.For straters, I have a lenovo ideapad yoga 11s model 20246. So far from what I have read is that due to the flashing power button im faced with the common sleep mode problem.What have i tried so far:- Several combinations of holding the power button- disconnecting the battery and hold power putton- combination of above mentioned and AC adapter either pluged and not- removing ram Two days ago I managed somehow to boot it up by a combination with the reset button. After that I changed several power managment options so that the system wont enter sleep mode again. After running it for like 1 hour it crashed showing colored stripes and making harsh noises. Since then I havent been able to boot it up again (back to blinking power button). Currently im letting the battery drain so I hopfully will be able to boot later and make a factory reset or maybe install win10 from scratch. If you have any further advice I would highly appreciate it !!! thank you in advance  for good measure here is also a photo of the internals... 


























DSC_0116.JPG ?8722 KB

Read other answers
RELEVANCY SCORE 65.2

Hi  A recurrent question but I did not find the answer for my laptop and the Lenovo setting application doesn't provide the feature. I want to be able to charge my phone on the USB port when the laptop is in sleep mode with AC plug-in. Where can I find for my laptop the option "USB always on" ? I check the BIOS and nothing there around USB charging and the Lenovo setting application section Power Management does not show any option for the USB. Should I go in a special application ? Is it standard or should I install the Lenovo companion ? Thanks for your helpRgdsNicolas

Read other answers