Over 1 million tech questions and answers.

CD Properties Window wrong size

Q: CD Properties Window wrong size

When I insert a CD in either of my two drives the window that jumps up giving me the options of what program to use (CD Properties ) is maximized and takes up the whole screen. This just started happening. If I double click on the top blue titlebarlbar it goes back to it's smaller (normal) size. I tried holding down the ctrl. key and closing the window but the next time the computer boots it does the same thing. It is not possible to drag this type of window in any way. The only option for this type of window in the upper right corner is an X to close it. It may need a registry edit but I don't know how. To access a similar type window open "my computer, right click on any drive, the window that opens is the same type. Any help would be appreciated.
Alan

RELEVANCY SCORE 200
Preferred Solution: CD Properties Window wrong size

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: CD Properties Window wrong size

Minimize it again and this time hold down shift and close it off.

Read other 1 answers
RELEVANCY SCORE 75.2

hi guys..
is there a program or a way to change the size of a file?i mean for example i have a music with 4mb and i want to when anyone watch the propertise of this song , it shows 10mb to him???

A:show wrong size of a file in properties

no one has my answer???

Read other 4 answers
RELEVANCY SCORE 75.2

Hi,
Thanks for the help in advance.

I have a folder (actually many) that give the wrong size in MB. Right clicking on a folder and selecting properties pops up a dialog that has the size listed as 11.5MB (12,163,992 bytes). Last I checked 12,163,992 bytes = 11.6MB. Why does windows report an inconsistent size.

I need to understand where windows got the 11.5MB from.
Thanks

PS I was going to upload a screenshot of the property dialog but could not figure out how to insert a picture into this forum.
 

A:Windows folder properties gives wrong size

Read other 11 answers
RELEVANCY SCORE 72.4

I am running WinXP, SP2. I have a Fellows Internet Touchpad installed. When I go to the Control Panel and select the Mouse, the standard Microsoft Mouse window opens instead of the Cirque Touchpad window. The mouse is identified correctly as a Cirque Ps2 Touchpad and the driver is correctly specified. The special functions of the touchpad are all working ok, however without being able to open up the correct properties window, I cannot make any changes. It used to work properly. I have tried uninstalling the touchpad driver and reinstalling the touchpad driver. That does not fix it. Does anyone have any ideas on how to fix it?

Read other answers
RELEVANCY SCORE 67.6

No matter how many times I go to 'View' settings, every time I choose a new window (i.e. opening a folder) I am always met with a small-format window rather than a full-screen, full-size one. I also am met with random lists instead of 'medium-sized icons', which I have opted for and chosen as default in 'view'. Have I missed a colossally simple tick in a box?

A:'New window' selection is always the wrong size/type...

Hello James,

By default, folder views are a per folder setting, and will be the same as when last closed per folder.

In a library, the folder view is shared between all included folders in the library.

If you like, you could use the method in the tutorial below to set a default folder view for all folders.
Folder Template - Set Default for All Folders in Windows 8
Afterwards, open File Explorer, maximize it to full screen, and close File Explorer. Each time you open File Explorer it should now open full screen as it was last closed.

Hope this helps,
Shawn

Read other 1 answers
RELEVANCY SCORE 59.6

When I insert a CD in either of my two drives

the window that jumps up giving me the options

of what program to use with the encloded media
(Handler) is maximized and takes up the whole

screen. This just started happening. If I double

click on the top toolbar it goes back to it's

smaller (normal) size. I tried holding down the

ctrl. key and closing the window but the next

time it opens it does it again. Happens with my

dvd writer and dvd-rom. I noticed notepad is

opening maximized too. Any help would be

appreciated.
Alan
 

A:"Handler" Window wrong Size

Read other 7 answers
RELEVANCY SCORE 58.4

Couple of my friends have Win98 with Internet Explorer 6. The text (and pictures) run out of the browser window in most of the Webb pages. The font size change does not help, monitor resolution change does not help. What could be the problem? It looks like the problem came with some of the IE updates!
Thanks
 

A:IE 6 "wrong window size"

Hi, Have they tried manually adjusting the monitors picture adjustment using the controls underneath or in the drop open panel on the front of the monitor...or the onscreen display controls?

This type of problem can also occur if DirectX is installed incorrectly or does not play nicely with the video drivers or some other software.

They need to give you details...video card, RAM they have installed, DirectX, chipset and processor would be good, too. Laptop or desktop? 98First or Second Editon?
IE 6.0 with the cumulative updates...right up to the most current?
Were they having any virus problems, or other malware that had to be removed by any removal programs?
Do they have any DVD burners or digital cameras installed...and are they having USB problems also?
Was the Windows reinstalled, fresh or over another copy recently, and is this problem all the time or just on the Internet...
Are there any ! marks in Device Manager anywhere...
Were there any messages when doing Windows Updates?
How far is it from here to there?
Little humor to brighten up your otherwise dull morning! I am serious about the details tho!
 

Read other 2 answers
RELEVANCY SCORE 56.4

I don't remember how long ago I submitted this problem, but it does not appear to have been addressed (or if it has I cant find the reply) I still have field within the properties box which do not have corresponding columns within the Explorer window. 
I seems to me to be a real case of the left hand not knowing what the right hand is doing as whoever designed these two items didn't exchange details. This was my original query "
Using Windows 10 / .wma & .wmv "properties" fields / Folder and file display columns. There are two fields in the properties
box "Content provider" and "Group description" which do not have corresponding columns within the folders. As I use both boxes, what do I do>" Nothing has changed!

Read other answers
RELEVANCY SCORE 55.6

Hello.
Im using vista ultimate x64.

When i access the local area connection window where all the TCP/IPv4 and
TCP/IPv6 are. I am unable to click on properties on any of them (yes i am the
administartor)
By other words, i am unable too access the window where you can change the
"Obtain an ip adress automatically" and "obtain dns server address
automatically" options are.

When i sellect TCP/IPv4 or TCP/IPv6, the properties button is just gray. As
is the unnistall button. When i hit the configure button, i just get sendt
back too the desktop. I am also unable to uncheck the TCP/IPv4 or TCP/IPv6
boxes on the left side of the names (or any of the other stuff)

If I hit the install button and try too install i new protocoll, i only get
a error message saying "windows cannot find the file"

Iv'e also tried it using the administrator account. But it didn't help.

What is causing this problem, and how I fix it?

Thanks in advance

Read other answers
RELEVANCY SCORE 55.6

Hello.
Im using vista ultimate x64.

When i access the local area connection window where all the TCP/IPv4 and
TCP/IPv6 are. I am unable to click on properties on any of them (yes i am the
administartor)
By other words, i am unable too access the window where you can change the
"Obtain an ip adress automatically" and "obtain dns server address
automatically" options are.

When i sellect TCP/IPv4 or TCP/IPv6, the properties button is just gray. As
is the unnistall button. When i hit the configure button, i just get sendt
back too the desktop. I am also unable to uncheck the TCP/IPv4 or TCP/IPv6
boxes on the left side of the names (or any of the other stuff)

If I hit the install button and try too install i new protocoll, i only get
a error message saying "windows cannot find the file"

Iv'e also tried it jusing the administrator account. But it didn't help.

What is causing this problem, and how I fix it?

Thanks in advance
 

Read other answers
RELEVANCY SCORE 53.2

With Windows 8.1, I am now having problems displaying and importing jpegs.   They show in odd colors, with a lot of black in them.    This wasn't the case early on, but now jpegs are impossible to work with for me.   I
only use -- Windows Photo Viewer, and place them in WORD documents.  Nothing fancy.   I cannot find a resolution here or anywhere.  Can you help?
.....
This is crazy.  When I try to save the BAD image, it looks horrible (blue, purple, heavy black frame) on my screen in PHoto Viewer, but I import it here and it looks fine.  Please, help.

Read other answers
RELEVANCY SCORE 52.8

Hi,
Thanks for all the help. I want to make my shorcuts start programs and windows (In WIndows Xp Pro SP3) at a certain position and with a certain size.

For instance I want to open Excell at position 20,30 (x,y) with a window size of 750 x 200, or maybe a internet explorer window at position 129, 357 with a window size of 562 x 397.

I gave the odd numbers in the example so that people responding will understand that I want CUSTOM SIZES. I know how to set the shortcuts to start maximized and minimized and also window tiling. That's not what I'm talking about. Does anyone know of shortcut switch that I can use?

For instance in some games if you want to start the game with cheats enabled, you put "-devmode" after the directory path in the "target" box of the shortcut properties.

Is there any other way?

There is an awesome program called "Montage3"
http://www.ideaxchg.com/montage/

which I use, but isn't exactly what I'm looking for. Please help out.

Read other answers
RELEVANCY SCORE 52

Image Properties - Attribtes V's File Size

Was uploading a image over at http://xs.to/ and there is a max. 2 MByte per file on .jpg files.
I had images that I know are under 2 MB but then get a error telling me the file is too big. I look in my ACDsee image viewer and look at the file size in window and I was way below 2MB so did not understand what was going on.
This was on a image I did Bygum posted. So I changed things by making it grayscale 16 bit but it was saved grayscale 8 bit and it got the size down below 2 MB.
But the I open the 3 images up again in PhotoImpact and clicked on Image Properties and your see that there are two sizes for each image. The file size is what your see in windows, image viewer etc.
So my guess is that http://xs.to/ the limit of 2 MB is not the file size but the Attribtes size.

What is all this on having the two sizes because I sure don't understand it.
Look at how many time bigger the Attribtes size is.

So anyone know what this means?

See screen shots
 

A:Image Properties - Attribtes V's File Size

Read other 7 answers
RELEVANCY SCORE 52

My Recycle Bin functions properly, except:
The Size Slider Bar (in Properties) is Grayed Out – and Unavailable to Change Size of Recycle Bin.

I’m an experienced Windows XP User.
I am using an Administrator Account.
I know exactly how the Recycle Bin should operate.

Recycle Bin Properties:
- All Tabs Function Properly
- All Command Buttons Properly
- All Check Boxes Function Properly
- All Radio Buttons Function Properly
* The Only Object Not Working is the Size Adjustment Slider Bar (remains Grayed Out):

It remains stuck at 1% for both Global (with “Use one setting for all Drives: selected)
And
Remains stuck at 1% for all Tabbed Drives (with “Configure Drives Independently” selected)

Please Help if Able - THANX !!!!!
Joe B!
 

A:Recycle Bin (Properties) Size Slider Bar Greyed Out

Read other 14 answers
RELEVANCY SCORE 51.6

I am having Acer Aspire 5052 ANWXMi-Turion Laptop.

(http://www.interweb.in/acer/2133-acer-aspire-5052-anwxmi-turion.html)

I have Windows-XP professional service pack 2 installed on it.

I am facing two problems in it:

1. If I go to My Computer and try to open any of the drives (i.e C, D, E & F) by double-clicking the drive labels, the drive is not getting opened.
But I am able to open the hard-drives using right-click-->open. This double-click problem is not happening anywhere else like in other folders etc.

2. The second problem I am facing is that I have 1GB of RAM in it(2 each of 512MB), but when I see System Properties it shows a RAM of 768MB but if I go to
System Information and check the Total Physival Memory it shows as 1024MB.
I would be really greatful if somebody can help me in resolving these issues.

A:Wrong Display Of Ram In System Properties

Hi .The memory differential...is probably caused by the fact that part of the physical RAM installed (1GB) is being used for onboard video. The System Properties info reflects the net of total RAM installed minus such allocation.What do you see if you go Start/right-click on My Computer and select Properties? Should be 768MB, if I am right.There is a setting in the BIOS which you can use to adjust the amount of RAM so used. You can set it for a lesser amount. If you only do normatl things, there is no reason to allocate more than 64MB for onboard video, IMO.http://www.ehow.com/how_2138456_configure-...rough-bios.htmlSorry, but I have no answer for your first question, although I have seen the answer posted in this forum before.Louis

Read other 3 answers
RELEVANCY SCORE 51.6

when i right click a folder on my network drive and choose properties the files and folders and the sizes just go up and up forever! see attached pic for example. there is no hope in hell theres almost the same amount of folders as there is files in there and the same goes for the size its nowhere near that.

A:whats wrong with my folder properties?

  
Quote: Originally Posted by totalguy


when i right click a folder on my network drive and choose properties the files and folders and the sizes just go up and up forever! see attached pic for example. there is no hope in hell theres almost the same amount of folders as there is files in there and the same goes for the size its nowhere near that.


Are you running a good Antivirus app? Strange things like this are often caused by virii!

Read other 9 answers
RELEVANCY SCORE 51.6

My computer has 2gb's of ram installed and my BIOS recognizes that I do as claimed and so does my System Information but right clicking on "My Computer" and Properties displays 256mb. Any one know a solution or what the problem is or if it will in fact affect my performance? I just formated to XP Pro from Media Center Edition which came with my laptop and had to change a BIOS setting for "enable native SATA support" for it to recognize my HD in order to format with XP Pro CD.

A:Wrong Ram Amount via Computer Properties

Hi

Open Task Manager (Ctrl+Alt+Del) and under the Performance tab, see what it lists under Commit Charge (K)>Limit.

You can also check in Start>Help and Support>Whats new in Windows XP>Tools (bottom left)>My Computer Information. (General Information)

Another way is Start>Run>type: msinfo32 and Enter.

Se what it losts their as the total amount of RAM picked up.

Read other 9 answers
RELEVANCY SCORE 51.6

Hey! i'm new here and i have recently noticed something wrong with my date and time properties. When i checked it it said "Datum en Tijd" where date and time is supposed to be at.
and it looks like that. D: i've been searching online on whats wrong with it but no luck. I didnt mess with the setting whats so ever. The only thing i've done was leave my laptop on overnight. So, if there is anything anyone knows on how to fix this or anything about it please help >__<
 

A:Something is wrong with my Date and Time Properties.

Read other 12 answers
RELEVANCY SCORE 51.6

I am working on an IBM I series 1300 for a customer of mine and I have a bit of a problem. The BIOS states a P3 750MHz processor but the Win XP properties shows a 477MHz P3?????????????? I have never seen this before and it seems to me that the computer is running a little slower than these have in the past. It's like it's running at 477Mhz instead of 750Mhz. Any ideas?

Thanks in advance

A:Wrong CPU specs in system properties

Sounds to me like a communications failure between your motherboard and Windows. I'd suggest updating your motherboard resource drivers (chipset, etc); these should be readily available from the website of your motherboard's manufacturer.

Read other 2 answers
RELEVANCY SCORE 51.2

hi. im new here but i hope im posting my request for help the correct way. My computer has a problem. the tabs on the display properties are not shown properly. i have tried changing themes and back to luna. However, once i reapplied the theme and close the display properties. rundll32.exe gives me an error "0x7c911e58 referenced memory at 0x00000000." anyone has an idea on what im supposed to do to restore my tabs? a reinstall of my display driver and upgrade of system bios didn't help. =[

A:Wrong Appearance Of Tabs Under Display Properties.

any help ? x.x

Read other 3 answers
RELEVANCY SCORE 51.2

hey everyone, I recently bought an HP lap i5 6200U, according to intel it suppose to be 2.80Ghz maximum but on my task manager and system properties it shows 2.40Ghz, at the same time sometimes on task manager the speed goes all the way to 2.70GHz,

A:system properties showing wrong GHz speed

Hi, CPU uses a technology called SpeedStep technology. It won't run its full speed if NOT required and it can bump up its normal speed when required. More information:          https://en.wikipedia.org/wiki/SpeedStep Regards.

Read other 2 answers
RELEVANCY SCORE 51.2

Hi Champs....

Just want a liitle suggestion and a feedback on my current query, which is as follows: -

A softwatre developed from our vendors on VB, & Access platform, has different Modules.
In each modules, there are some categories, and clicking on them opens a child window.

The size of the child window created in the software is not very comfortable in viewing the details, as the size of the window is prety small, say 2/5 of the parent window.

And, considering the Parent Window size as equivalent to that of the Excel file (maximized view), the view area for the child windows created is very small.

I am not pretty familiar with VB, and hence require a technical help on the same.
I think that the increase in size is possible, through reworking on the Forms.

Please revert with the possible solutions on the same.

Regards,
Divy
 

A:Parent Window & Child Window size

Read other 6 answers
RELEVANCY SCORE 50.8

we have a FX ApeosPort-II C4300 fuji printer. we recently updated to Office 2007 from Office 2003.
When we were using Office 2003, i was able to specify paper size for the document i wanted to print in printer's properties, however, since updated to Office 2007 i can't. Actually, i can specify the paper size by choosing custom print then edit the size i want to print but as soon as i click okay button and reopen printer properties i can see paper size did not change. I have already changed the paper size in page set up by the way.
I checked the our printer's properties and it shows under security tab for everyone can "print" section clicked. But "Managed Printer" not clicked. Only power users and administrators have that privilege.
so my question is: the reason i can't specify paper size in the printer properties because i am not a power user and don't have administrator privilege?
 

A:Solved: Can't specify paper size in printer's properties Office 2007

Off the top of my head, I'd be inclined to think you simply need to update your printer driver. Have you done so lately?

http://www.support.xerox.com/go/prodselect.asp?Xlang=en_US&metrics=HDR
 

Read other 2 answers
RELEVANCY SCORE 50.8

Good afternoon!
I received a new ViewSonic 15" flat screen monitor for a gift and while it takes a while to get use to my main problem is getting the font to be bigger, especially in my Outlook Express, and my various Instant Messenger tool bars. The optimum resolution they recommend to have for the color is 1024 x 768 pixels and when I do that it makes all the fonts extremely hard to read even with my prescription glasses. The crispness of the font is a little off also as a little bit blurry. Any suggestions to improve my viewing capacity under this resolution? I've changed the font sizes under appearance in the Display Properties. Thank you in advance if someone can help me out.
 

A:Display Properties - Font size - Flat Screen Resolution

If that resolution is not good for you, change it. Put it on whatever makes it easiest for your eyes.

ClearType may help with the bluriness, http://www.microsoft.com/typography/cleartype/default.htm
 

Read other 1 answers
RELEVANCY SCORE 50.4

I have a really weird situation here. I have two audio devices, speakers and headphones, both connected to my computer. The headphones use a usb and a audio slot and the speakers use only a audio slot. When I go in properties, they show up backwards. If audio is playing through my headphones, it says they are playing through the speakers. This really hasn't been much of an issue because it hasn't really effected anything but now I'm trying to optimize the settings of these devices. If I try to enable higher bass quality for my headphones under "headphones" in the audio section, it enhances it for the speakers. But for both devices there are different options to enable or disable so I can't use them on the correct device. I know what I'm saying probably doesn't make sense but let me put it like this. Under my headphones there is an option for optimizing "Headphone virtualization," but I can't actually put it to effect because it applies for my speakers (which seems to do nothing), and under my speakers I don't get that option. So basically what I'm saying is I can't optimize my audio devices because there is some sort of weird error.
 

A:Solved: Audio devices showing up wrong in properties.

Desktop or laptop? Which ports are each device using?
 

Read other 3 answers
RELEVANCY SCORE 50

I am trying to verify the contents of two folders on my network using Windows Explorer.  I will attached a screenshot as soon as they verify my account.
In the left pane, is my original folder selected (\\NAS02-4DD\usbshare1-2\Archive\Metal Building\A & S\Drawings\NSDrawings) and then I right click and hit properties to see the file count and size of the folder.

In the right pane is the copied folder selected (\\NAS02-4DD\Archives\0Arch\Metal Buildings\A & S\Drawings\NSDrawings) doing the same thing.

You can see what the properties are by the two respective NSDrawings Properties windows.  They do not match.  However, if you physically count the files, and even look in the bottom left corner of each window (after I hit CtrlA) you will see there
are indeed 902 files in each folder.  I have re-booted all 3 machines associated with these files, and can not get them to ever read the same when I view the properties of each folder.
This is a HUGE problem when it comes to trying to verify if my files have indeed copied in full from users computers to a new N.A.S. unit.

Is there a solution or other way to verify this information without having to open each folder and view its' contents manually?  I am going to be moving about 8TB of information around, and all of it needs to be verified after moving.

Thank you.

A:Windows Explorer folder properties giving wrong data

Close thread, problem was a failing hard drive.
Sorry for wasting time, I should have inspected the drive more closely before posting.

Read other 13 answers
RELEVANCY SCORE 50

Hello, I have a problem .. again

I was following these steps until i need help on STEP 7 on this link:

http://portforward.com/networking/static-xp.htm

Well first, i went to Start>Control Panel>Network Connections and when I right-clicked on my Internet connection and i chose Properties, the Properties window showed up ..

but the Properties window disappeared.....
how can i fix this problem?
 

A:Why does my Properties window shuts off?

anyone!?

*sorry if double-posting isnt allowed here.....*

if responded, ill delete this post*
 

Read other 1 answers
RELEVANCY SCORE 50

res://C:\WINDOWS\SYSTEM\SHDOCLC.DLL/dnserror.htm#http://leader.linkexchange.com/1029798962505/X919500/showiframe?

what does this mean
 

A:properties window question

kknowles
Please create one thread per problem to avoid confusion.
Closing thread duplicate.
http://forums.techguy.org/showthread.php?threadid=91983

Dave
 

Read other 1 answers
RELEVANCY SCORE 50

Anyone know of a list of useful properties window extensions?

I have added a mediainfo tab and a file hashing tab and I quite like the idea of having useful apps right there.

A:Properties window tabs

Put to many and it can slow things down...
Moderation everything in moderation you'll live longer and healthier.

Read other 4 answers
RELEVANCY SCORE 49.2

everytime windows loads, the windows 32 properties window come up. how do i stop this?
 

A:windows32 properties window on startup

1. Open Regedit
2. Browse to HKLM or HKCU then Software\Microsoft\Windows\CurrentVersion\Run
3. Remove any entries that refer to Windows 32 or System32 or whatever.
4. Close Regedit
 

Read other 1 answers
RELEVANCY SCORE 49.2

Since I am new to the forum, I'm not sure where my problem should be posted. I am also not sure if it is a hardware or software related problem, but here it is.

Suddenly, when I try to print, the print properties dialog window does not appear when i click on the properties button. It tries to activate, but immediately reverts back to the print window. This occurs in both OpenOffice 4.1.1 and LibreOffice 4.3, both of which have previously worked fine for months. I often print to both sides of the page (echo print), but can only print on one side (default) since I cannot change the properties. The only thing I can recall that might have any bearing on the problem is that I had previously printed to a file - something I rarely do. I checked the settings and "print to file" is not selected. I am printing to a HP LaserJet Pro M1530 MFP series PCL6 printer and am using Windows 8.1 operating system. I have tried reinstalling both word processing programs and have reset the printer to default settings and updated.

If anyone can help with this problem, I would greatly appreciate your help.

A:Print properties dialog window does not appear

Printers can be very frustrating to say the least. When I've had printer problems in the past, this is what has worked for me:

1. Unplug the power to the printer
2. Wait about 30 seconds or so
3. Plug it in and let it go through it's initialization
4. Then try it again

If that doesn't work, try reloading the printer driver from the HP site. If it still doesn't work, try a system restore back to the last time the printer was working successfully. That's about all the tricks I know for printers. Hope it helps ...

Read other 1 answers
RELEVANCY SCORE 49.2

Hi,

I've had real trouble locating this particular window in Windows 10. The only way I can get to it is if I create a manual entry for a wireless network. In Windows 7 you used to be able to get to it for existing wireless networks that I had previously connected to. Does anyone have any idea how to get to it? Many thanks

A:Where is the Wireless Network Properties window from W7?

Settings app > Network & Internet > WiFi > Manage known networks. Select a network, click Properties

Wireless Network Profiles - See in Windows 10 - Windows 10 Forums

Read other 4 answers
RELEVANCY SCORE 49.2

Hi, I speak french, so my english isn't perfect, if I wrote something you didn't understand, just tell me and I'll try to better explain.

I have a good computer knowledge, but the problem I have is very, very weird.
I was trying to do a test for the "indice de performance windows" (sorry I don't know the name in english, my windows 7 is french), but every time i right click properties on the "computer" window, they both disapear...
It's hard to explain, so I record it on my phone: https://www.youtube.com/watch?v=okY-ad_xIS4

Please, help me!
thanks and happy new year

A:Computer's properties window disapears

See if OPTION TWO in this tutorial helps: SFC /SCANNOW Command - System File Checker

Follow OPTION THREE and attach sfcdetails.txt in a new post in this thread.
(Use the paper clip icon just above the posting window to attach the file)

Read other 9 answers
RELEVANCY SCORE 49.2

Hey! I've just rebuilt my computer and reinstalled XP: it's gone back to the default of logging me out after 20 minutes of inactivity, and I want to change that so it doesn't log me out at all!

However, the properties window (the one you reach by right clicking on the desktop) is different to how it should be- when I first installed XP it was the normal window with the tabs for themes, desktop, screensaver, appearance and settings. However, for some reason recently all it's doing is show the tabs for themes, appearance and settings, so I can't reach the power settings that should be under the screensaver tab!

I've tried accessing power settings via the control panel, but I can't seem to find anything to turn it off or change it- any help on this one? (And any help on getting my display properties window back to how it should be, showing all the tabs?)

Thanks!
 

A:XP logging out: can't change in properties window!

copy this code into a notepad, save as restoretabs.reg

doubleclick restoretabs.reg and confirm import to registry.
 

Read other 1 answers
RELEVANCY SCORE 49.2

Mod edit; Moved to Malware Logs forum ~~ boopme All my desk top files open in a rt click window only properties and its very new I ran anti malware nothing found ran combo fix here are the results ComboFix 14-01-29.01 - becky 01/29/2014  12:00:23.2.2 - x64Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.5887.4433 [GMT -8:00]Running from: E:\ComboFix.exeAV: Microsoft Security Essentials *Enabled/Updated* {641105E6-77ED-3F35-A304-765193BCB75F}SP: Microsoft Security Essentials *Enabled/Updated* {DF70E402-51D7-30BB-99B4-4D23E83BFDE2}SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}..(((((((((((((((((((((((((((((((((((((((   Other Deletions   )))))))))))))))))))))))))))))))))))))))))))))))))..c:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgcebc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\background.htmlc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\crossriderManifest.jsonc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\extensionData\manifest.xmlc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\Extensions\kikjpgpbpnapbimplfcbcbakjacpgceb\1.25.32_0\extensionData\plugins.jsonc:\users\becky\AppData\Local\Google\Chrome\User Data\Default\E... Read more

A:files open in properties window

should hav done it befor I used  adaware and it found the culprit  now I am up and running again Gosh I love this site.

Read other 3 answers
RELEVANCY SCORE 49.2

Hello, I have been infested with ise32 Property window which keep appearing on window start up. I have scan my computer with Norton 360 and Window defender but to no avail. I would appreciate your help to solve them problem. Below is the Logfile. I look forward to your reply.Thank you.Best reguards,LeoComboFix 08-06-20.4 - xiaoleo 2008-06-27 1:49:14.1 - NTFSx86Microsoft? Windows Vista? Home Premium 6.0.6000.0.1252.1.1033.18.1669 [GMT 8:00]Running from: C:\Users\xiaoleo\Desktop\ComboFix.exe * Created a new restore point.((((((((((((((((((((((((( Files Created from 2008-05-26 to 2008-06-26 ))))))))))))))))))))))))))))))).2008-06-25 19:26 . 2008-06-25 19:26 <DIR> d-------- C:\Windows\System32\Adobe2008-06-24 01:48 . 2008-06-27 01:02 <DIR> d-------- C:\Program Files\Garena2008-06-23 23:25 . 2008-06-24 21:51 <DIR> d-------- C:\Users\xiaoleo\AppData\Roaming\Hamachi2008-06-23 23:24 . 2008-06-23 23:25 <DIR> d-------- C:\Program Files\Hamachi2008-06-23 23:24 . 2008-06-23 23:24 25,280 --a------ C:\Windows\System32\drivers\hamachi.sys2008-06-20 22:09 . 2008-06-20 22:09 <DIR> d-------- C:\Users\xiaoleo\AppData\Roaming\Fujitsu2008-06-15 00:17 . 2008-04-23 12:27 1,244,672 --a------ C:\Windows\System32\mcmde.dll2008-06-15 00:17 . 2008-04-23 12:27 428,032 --a------ C:\Windows\System32\EncDe... Read more

A:Keep Getting Ise32 Properties Window On Startup

ComboFix logs should not to be posted outside the HijackThis forums. It is an extremely powerful tool which should only be used when instructed to do so by someone who has been properly trained. ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again.Please create a new topic in the Am I infected? What do I do? forum, explaining the nature of your problem. Describe pop-ups and system tray or desktop icons that have appeared. Explain what is "going wrong" with your computer. Note any tools you have used and their respective results.If needed, we will direct you to our HJT Preparation Guide.Thank you for using BleepingComputer as your malware removal source.This topic is now closed. The BC Staff

Read other 1 answers
RELEVANCY SCORE 49.2

Hello. I have noticed a strange fact regarding my windows 7 32 bit operating system. When I delete some files in a folder, then go to properties, when i look at "Contains", it still shows the number of files i had before deletion, not the current number of files in that folder. Is there a way to repair this? Thanks in advance! (rebooted my pc, but with no success, if it is to mention)
BTW: Happy holidays

A:Strange occurence in properties window

Did you empty the Recycle Bin?

I don't see a "Contains" choice in any folder property menu. Can you tell me how you get to it, as following the directions you gave does not show it for me.

Maybe post a screen shot of it? Make sure the window you want to capture has the focus.
Press Alt+Print Screen. That will capture the active window.
Print Screen will capture the entire screen, including properties dialogs.
Start MSPaint - Start then Run, type mspaint and press Enter.
Press Ctrl+v to paste the picture in to MS Paint.
Click File then Save as and save it to your Desktop.

Start a new reply.
Click on the Browse button below the message input area.
Navigate to where you saved the picture, select it and click on Open.
Click on Attach This File.
Once uploaded, click on Add To Post to the far right of the uploaded file.
Scroll down and click Preview Post to verify the image shows.

Read other 9 answers
RELEVANCY SCORE 49.2

Hello,
I have been infested with ise32 Property window which keep appearing on window start up. I have scan my computer with Norton 360 and Window defender but to no avail. I am currently using window vista home. Please advice me what to do. I would appreciate your help to solve them problem.
I am looking forward to your reply.

Thank you.

Best reguards,

Leo

A:Keep Getting Ise32 Properties Window On Startup

It's not unusual to receive such an error after using tools to remove malware infection.A "Cannot find...", "Could not run...", "Error loading... or "specific module could not be found" message is usually related to malware that was set to run at startup but has been deleted. Windows is trying to load this file but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads. To resolve this, download Autoruns, search for the related entry and then delete it.Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there. (click here if you're not sure how to do this.)Open the folder and double-click on autoruns.exe to launch it.Please be patient as it scans and populates the entries.When done scanning, it will say Ready at the bottom.Scroll through the list and look for a startup entry related to the file(s) in the error message.Right-click on the entry and choose delete.Reboot your computer and see if the startup error returns.IMPORTANT NOTE: ise32.exe is related to the family of worms and IRC backdoor Trojans. Backdoor Trojans, IRCBots and Infostealers are very dangerous bec... Read more

Read other 5 answers
RELEVANCY SCORE 48.8

Everytime i turn on my computer Sys32 properties appears on the screen of my window, please help me solve the problem
below is the detailed discription of the problem

Sys 32 Properties

Type: Application

Origin: c-1-3-64-8794238531-8742492-9897532

Size: 0 bytes

Thank you again
so02

A:Window Sys32 Properties Appears On Opening

Have you checked to see if you are infected? Sometimes an infection will corrupt your onboard protection - so I suggest that you try these free, online scans: http://www.bleepingcomputer.com/blogs/usas...?showentry=1252Also, could you please post a screen shot of what appears on your desktop? Here's a link on how to do that: http://www.bleepingcomputer.com/tutorials/how-to-take-and-share-a-screen-shot-in-windows/

Read other 2 answers
RELEVANCY SCORE 48.8

Quite a bizarre one - every time I try to view the properties of any file or folder, I'm met with:

"Explorer.exe - Application Error

The instruction at "0x02e1415b" referenced at "0x000000000". The momory could not be "written".

Click on OK to terminate the program
Click on CANCEL to debug the program"

Has anyone even encountered this before? Searching the forums produced nothing.

Thank you very much for your time and effort - it's well appreciated.

A:Explorer Crashes on loading Properties Window

Quote:





Originally Posted by JohnnyUK


Quite a bizarre one - every time I try to view the properties of any file or folder, I'm met with:

"Explorer.exe - Application Error

The instruction at "0x02e1415b" referenced at "0x000000000". The momory could not be "written".

Click on OK to terminate the program
Click on CANCEL to debug the program"

Has anyone even encountered this before? Searching the forums produced nothing.

Thank you very much for your time and effort - it's well appreciated.




Hi JohnnyUK have you seen this http://www.microsoft.com/resources/d...d_stp_hwpg.asp give it a shot. Also take a look at this http://www.microsoft.com/resources/d...d_stp_hwpg.asp.

Read other 2 answers
RELEVANCY SCORE 48.8

I turned on sharing for the C drive and added an Everyone group in Security to allow access to my other computer on my network. When I go to close the Properties window I a message that says "You are about to change the permissions settings on the root directory of the startup disk which can result in unexpected access problems and reduce security. Do you want to continue?".

I answered yes and it went through all the folders and gave an access denied message on system folders. After if was done I got the same message mentioned when I tried to exit the Properties window. So I removed sharing and the Everyone group. But I'm still in the same situation. I keep going through the same loop and can not exit the Properties window.
 

A:Can't exit Properties window for C drive after sharing

Open task manager and end the process all "explorer.exe" and "rundll32.exe"
 

Read other 2 answers
RELEVANCY SCORE 48.8

I've been fighting properties window since I installed window 10...
I use this function a lot. The problem is the properties window opens in the background.
So I have to minimize all the windows I have open to see the properties window.
The weird thing is the properties window is the only one that does that, When I open a new
window of anything it opens in the forground.
Is there a way to force the properties window open in the forground...Thanks...

A:How to force the properties window open in the foreground!

I fixed it.. If anyone is having this same issue... This is what I used to fix my problem... It's for Windows 7 but it applies to windows 10...
http://answers.microsoft.com/en-us/i...6-aa3364b4b1a7

Read other 0 answers
RELEVANCY SCORE 48.8

I have a large number of files which I am changing the naming convention for in the Title detail and am getting frustrated having to right click for properties and anvigate tabs ebfore being able to change each one. I can see the Title of the files in the Details view of the folder they are in, but there cannot find a way to edit them in that view other than the manner previosuly stated.

That being said, does anyone know of a workaround that would allow me to change each title without aving to jump through hoops to edit them?

Thanks in advance.

-Clockwork

A:Wish to edit detail properties of files in window

Welcome to the Forums Clockwork,

So if I get it correctly you want to rename multiple files at once?
If so, go to the folder they are located in, click anywhere in the folder, hit crtl and a at the same time to select all the files and then hit F2

After that you'll see that the name banner of the first file in the folder turned empty. You can now type the name you want it to have in, and hit enter. It will change all the files to that name, followed up by a number.
Hope that that helps!
Nommy

Read other 5 answers
RELEVANCY SCORE 48.8

HelloI have been infested with Sys32 properties window which keep appearing on window start up. I have tried by Norton anti virus also but it never works. I would appeciate if you help me to solve this problem. Below is the window which appears:Sys 32 PropertiesType: ApplicationOrigin: S-1-5-21-1482476501-1644491937-682003330-1013Size: 0 bytesThanks and best regardsRajEdit: Moved topic from Introductions to the more appropriate forum. ~ Animal

A:Window Sys32 Properties Appears On Opening

The System32 folder opens at startup because of a corrupt system registry value. The value could have been corrupted for a number of reasons to include malware or installing/uninstalling a program from the Internet which did not install/uninstall itself properly.Click on the link below:http://www.kellys-korner-xp.com/xp_tweaks.htmScroll down to #260 and click "System32 Folder Opens Upon Boot" in the right column. You will be prompted to download xp_systems32opens.vbs. Save the file to your desktop and double-click on it to run the script. Since the script modifies certain registry settings you may receive an alert from your anti-virus or any script blocking program. Ignore the warning and allow it to continue.The problem could also be caused by empty run entries in your startup shortcuts which will open the system32 folder. Check the startup run registry entries and remove those entries. See System32 Folder Opens When Logging on to Windows.These steps involves making changes in the registry. Always back up your registry before making any changes. If you are not familiar with working in the registry, then you should NOT attempt to make any changes on your own. Improper changes to the registry could adversely affect your computer and render it inoperable. ERUNT is an excellent FREE tool that allows you to to take a snapshot (backup) of your registry before making changes and restore it when needed.

Read other 1 answers
RELEVANCY SCORE 48.4

hey guys, i'm working on my father's computer. long story short the new mobo i purchased seems to be having a little difficulty.

MSI board #KM4AM-V

my problem is that the fan doesn't want to sit on the cpu properly without coming into some contact with a chipset heatsink and what i believe to be a diode. i have a generic fan that is for the amd cpu xp series.

http://www.msicomputer.com/product/p_spec.asp?model=KM4AM-V&class=mb take a look at the mobo.

i have never had this problem before. the previous mobo did not have this problem either.

has anybody else had this problem or am i just lucky??

if so any recommendations for a different fan or is contact between the fan
and the above mentioned parts acceptable ??
 

A:wrong size fan??

heatsinks can get quite hot. so no touching! and if youve tried putting the heatsink on a few times, youve obviously damaged the thermal compound on its base, and it needs to be replaced.
about the mobo, first of all, for the amd athlon xp series, you should have never gone for a via chipset based motherboard. thats not a diode, its a capacitor, and can melt easily if t stays at temperatures like 60C for some time. id recommend looking for a little smaller heatsink, but dont get something too small, as it wouldnt cool the cpu properly
 

Read other 1 answers
RELEVANCY SCORE 48.4

I recently reformatted my computer, (Athlon, 2.08, 512mb, 120GB HD, etc...) but the computer is only saying that my hard drive is 4.87GB or something like that, what gives? I've never experienced a problem like this after completing a reformat....does anyone know how I can get the rest of my HD back???
 

A:Wrong HD size!!

Read other 6 answers