Over 1 million tech questions and answers.

Windows 7 freezes after clean install

Q: Windows 7 freezes after clean install

Hey guys,

Alright, so my hard disk crashed a few days back (I was running XP Pro), so I decided to install 7.

My specs are:

Motherborad: Intel 82865GBF
Graphics: On-board 256MB graphics, they are handling the aero style well.
CPU: Intel Core 2 Duo 2.0Ghz
Ram: 3 GB
HDD: 320GB
Now, here's the problem. I installed Windows 7 and it loads up fine. Then when i'm doing anything like browsing though empty folders or opening up the control panel, the compe freezes for a few seconds, the active window says 'Not Responding' in the title bar.

I took a closer look at the Cabinet and realised that when I tell the computer to do something, the HDD light doesnt light up, then I get the Not Responding, and then 10-20 secs later, the HDD light blinks and the Not Responding window starts working.

It does this for everything I do, the HDD light has a lag of 10-15secs after which it lights up and the computer does what I had told it to do.

BTW, the Aero glass interface works great, no lags whatsoever in that respect.

Also important to know is that the HDD is completely blank, it only has Windows 7 on it, I havent installed one file or application.

So I think this is a HDD problem since it just crashed a few days back, but I can't be sure.

Ohh, last problem, My keyboard doesnt work completely (it used to with XP), in Windows 7 i couldn't press Shift or Caps Lock and some other alphabets, today morning I could press shift and Caps Lock, but those same alphabets didnt work.

The keyboard thing can either be a Keyboard problem (very unlikely) or a motherboard problem.

Please let me know guys.

Thanks.

RELEVANCY SCORE 200
Preferred Solution: Windows 7 freezes after clean install

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows 7 freezes after clean install

Okay, new problem.

Just restarted my computer and after the Starting Windows screen, all I get is a black screen with a mouse, and I can move the mouse around but nothing opens, and HDD light was blinking a lot at the Starting Windows screen but on the black screen, no blinking.

This reminds me of a virus my brother had on his laptop last week (running XP). His laptop was working fine and then he started it one day and after the windows screen it just goes black with a mouse pointer.

Read other 30 answers
RELEVANCY SCORE 66

Hello have got stuck on what should be simple.

Have successfully already got the latest current 32-Bit Windows 8.1 (upgrade 1 etc.) running smoothly (since it was released to market) using the original retail Windows 8 Pro DVD Physical Media (from Amazon [pre-order]) to upgrade from within a running & activated copy of 32-Bit Windows XP Pro SP3.

Ideally would like to move to 64-Bit Windows 8 (then 10) to access 8GB of RAM.

Have just discovered that neither my 32-Bit or 64-Bit Microsoft Windows 8 Pro Upgrade DVD's will clean install with a single blank HDD.

Both Win8 DVD's boot, then the blue 4 panel Windows logo appears, then the white dots circular spinner appears below the blue Windows logo, then the entire screen goes blank to black (but remains powered on) and nothing then seems to take place - no HDD light activity any more - nor any DVD Drive light activity that stops as well - just slow light pattern changes on my lit up (Crucial Ballistix Tracer) RAM.

The desktop has been at black screen for just over an hour now (writing this on laptop) no HDD / DVD indicator light activity - even with a brand new SATA cable!

Any ideas how to overcome this weird problem as also would ideally like to be able to clean install just Windows 8.1.

Regards.

A:Clean install of Windows 8 Freezes just after Spinner

Hi,

I am also having this problem with my win8 DVDs. The 32 bit actually throws an error screen after the spinners, but the 64 bit just goes blank/black like yours. I have no idea what to do.

Read other 2 answers
RELEVANCY SCORE 65.2

I'm trying to install a 'clean' installation of vista
I already have vista on my computer as my operating system but I have been experiencing problems.
I'm booting from the vista disc, and everything seems to be working correctly until after the first start up. Once I get to the screen where it says 'completing installation', suddenly it just stops working. It's not really frozen, but it will not continue the installation. I've tried installing it around five times and this has happened every time.
Any suggestions on how to fix this?

 

A:Windows vista clean install freezes, or shuts down

Elaborate a bit please: Do you have Vista already installed and you are trying to install another copy over the existing one? A clean install to me means that you have removed the previous installation of Vista.
 

Read other 1 answers
RELEVANCY SCORE 58.8

Hey guys, I've been trying to fix this myself but with no luck. Maybe you can give me some tips? I think it is a hardware issue which I have little to no experience with.

It all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....

Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..

...So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.

If anybody could give any advice, I would greatly appreciate it. I already installed Windows 7 on my laptop so I know it's my desktop which is causing the issues..

Gateway FX4710
Intel Core 2 Quad Q9300 / 2.5 GHz
6GB Ram / 667.0 MHz
NVIDIA GeForce 9800 GT / 512.0 MB

A:Windows 7 Clean Install: Freezes on "Starting Windows" screen

Hello mshannahnv, welcome to Seven Forums!





As you have nothing to lose on the Hard Disk Drive (HDD) have a look at the info below; be sure to post back with any further questions you may have and to keep us informed.


   Information

After you have made backups of everything you care to save and you want to do a real wipe "secure erase" to the Hard Disk Drive (HDD) have a look at this tutorial at the link below, it over-writes everything, all the old Windows code including the old Windows drivers, everything all data, giving you the best possible space to install Windows 7 to; it goes hand-in-hand with a clean install.

SSD / HDD : Optimize for Windows Reinstallation

How to Do a Clean Installation with Windows 7

Read other 9 answers
RELEVANCY SCORE 57.6

Gateway Intel Pentium DualCore Vista 32-bit
----------------
I am trying to run a clean install after my computer crashed and the unmountable boot volume problem arose. When I try to Boot From CD/DVD, Windows loads (long white bar on bottom fills up over a minute or two), it starts the next Windows Corporation page that looks as if it's starting up the computer, then simply freezes on a black screen. My boot order is CD/DVD first and I am booting to the original OS disk. (If I try to Start Computer it comes to the blue screen of death, and when I try system repair it returns to that screen.)

Any ideas or links as to how to start the clean sweep/reinstallation process? Is there software I need to run a clean sweep?

Thanks.

Read other answers
RELEVANCY SCORE 57.6

Hello
I have tried toubleshooting this problem my self with no sucsess, have tried taking computer to pc outlett to fix(they just formatted it and cbf seeing if it acually worked) with about the same luck, so hopefull there will be a smart puppy out there somewhere
I have run Vista home premium 32bit for a while, but now have decided to upgrade my pc with
Mother- Gigabyte Ga-EP45-DS3R
CPU- Intel Core 2 Quad Core 2.83gHz
GPU- ATI-HD4870X2 2Gb Pci-E
MEM- Corsair 4GB kit Twin2x4096-8500c5df w/fan
HDD- Samsung SATA2 160GB
Pwr- Thermal Take "tough power" 750watt
Case- Antec 900 Gaming Case

And heres the Problem:
I Installed XP first(i have vista upgrade) then installed Vista Flawlessly.
After about 20min of installing drivers ect it froze.Lost Power to USB devices and had to restart.
This happend once or twice more, then worked for the rest of the night.
I updated all Vista and drivers.
Even played "crysis" with all graph settings on very high without a problem.
Next day it began to freeze every time i booted windows(within 1-5min of seeing vista GUI)
It also restarted it self 1-2 times after seeing motherboard image on boot up. Then froze just before "verifying DMI pool Data".But after another restart, ran thru to windows and froze again.
I formatted it and took off "raid 0" wich i was running.
Strang thing was it did its usal freeze 1-2 times then ran perfectly that night.But next day surpirse suprise now does one of the two freezes m... Read more

Read other answers
RELEVANCY SCORE 57.2

Puchased 2 Think Centres from a local university. No operating system on either. Tried installing Win 10 with media creation tool on flash drive then the ISO on DVD. The Windows logo comes on the screen and freezes. After about a min, it says something went wrong and restarts only to the same result. Someone said I need drivers but can you install drivers without an operating system installed? the units originally had Win 7.  

Read other answers
RELEVANCY SCORE 57.2

Puchased 2 Think Centres from a local university. No operating system on either. Tried installing Win 10 with media creation tool on flash drive then the ISO on DVD. The Windows logo comes on the screen and freezes. After about a min, it says something went wrong and restarts only to the same result. Someone said I need drivers but can you install drivers without an operating system installed? the units originally had Win 7.  
 
Mod:  edited Subject line to add system type
 

A:ThinkCentre M90p: clean Win 10 install freezes

Your systems may not be supported for Windows 10, you can check here:  Windows 10 Upgrade - Supported System List

Read other 3 answers
RELEVANCY SCORE 57.2

Hello, my computer has been freezing for the past few days every time I try to login.

It will sometimes give me a pink screen, I got in once but the screen went black in a couple minutes.

I can login in safe mode fine and even normally if I do diagnostic mode from msconfig.

I tried repairing windows 7 startup, but it detected no errors. I tried a clean install but the problem stayed.

all help is appreciated
 

A:Computer freezes after login, even after clean install

"It will sometimes give me a pink screen, I got in once but the screen went black in a couple minutes"...

Sounds like a video card issue. What are your complete computer specs, and what kind of video are you running? On-board or separate video card?
 

Read other 8 answers
RELEVANCY SCORE 56.4

Hi everyone. It seems I have the worst luck with Windows these days, but here is my problem.

I have made two clean installs of Windows 2000 Professional today trying to figure out a problem. It all started with my first install. It was behaving funny, freezing on startup (after desktop icons loaded) every other reboot or so. I put the latest Via chipset drivers on there, and nVidia video drivers (to get out of 16 color mode) and then the freezing upon boot seemed to stop.

I had already made the mistake of installing a few applications such as Firefox and Atomic Clock Sync, etc. Not only did it crash on boot every other boot or so, it would always freeze 2-3 minutes after starting a VNC session (using RealVNC). I tried troubleshooting those problems all evening, and I thought I would just start clean, in case something happened along the way.

So an hour or so ago, I started the 2000 install process again. It went fine and didn't have any problems. I installed a firewall first, just to be sure I didn't get the new install infected in any way. I went to download the nVidia drivers so I could actually see things in a decent resolution and color quality. That went fine as well.

I installed RealVNC and tried it from another machine. Speed was nice and fast, but just like before, it freezes the whole computer after 2-3 minutes, and I have to do a hard reset. Same result with UltraVNC I'm afraid.

I posted this in the Windows forum because I've checked ou... Read more

A:Brand new clean install Win2k. Freezes after 2-3 minutes of use!

Read other 16 answers
RELEVANCY SCORE 56.4

Hi there,

I recently acquired the computer listed in my specs, and was having 10 second freezes when running programs or just exploring the hard drive. I have XP Pro SP2. I figured it might be windows or something so I tried running a clean install. Just after it asks for SCSI or RAID drivers at the bottom it freezes and then blue screens on me saying "A problem has been detected and Windows has been shut down to prevent damage to your computer... blah blah blah, error code STOP: 0x0000007B (0xF7CAE524,0x00000C34,0x00000000,0x00000000). So I ran the Windows disk checker after booting in my original XP Pro SP2 and it gave me the same blue screen. AFAIK I have 2 Western Digital 74GB HDs in RAID 0 configuration... I surmise RAID 0 was installed incorrectly or I have a bum hard drive.

What is the right step to take from here?
 

A:Blue screen on Clean Install, Diskcheck, 10 second freezes

Read other 11 answers
RELEVANCY SCORE 55.6

Installed Win 7 Pro x86 last night on a new HD. After installing SP1, restarting freezes at the Gateway boot screen and I have to hit the power button to shut off, then turn back on. There are no alerts in device manager, so I don't believe this is a driver issue. Everything else seems to be working fine, so I don't think the HD is bad. Any help would be appreciated. Thank you.

A:Restart freezes on manufacture's boot screen after clean install

Run a startup repair and see if that fixes the issue.

Startup Repair - Run 3 Separate Times

Read other 4 answers
RELEVANCY SCORE 55.2

I have a Asus Zenbook laptop (UX31). I crushed my MBR and somehow I couldn't ever restore it so I did a new clean install (even though I have a Windows.old folder with most if not all of my old files).

And so the usual boring process began: download drivers, installing them, installing the usual software (Avast, Comodo firewall, Chrome, Office, Adobe programs...) and almost on top of that I began doing lot of work with it, sadly I have almost no time to lose.

Somewhere in that process I started noticing some performance problems: doing different things (open a new chrome tab, clicking a link, open folder, clicking low workload buttons in any program) makes the whole thing freeze for 1-4 seconds. Most of the times the mouse can still be moved during the freeze moment, other times even the mouse is freezed for those 1-4 seconds which is more annoying.

In the last install nothing like this happened, system was perfectly fluid. As far as i can remember I have installed the same drivers from the same Asus page, and the same software. Obviously something is different.

I had the suspicion it was COMODO firewall that was freezing things (its alert windows usually freeze more consistently) so I temporarily "disabled it": but problems persist.

Can you help?

A:Clean Win7 install + drivers + basic software = randome little freezes

Hello Joker mate what media are you using to install with? May I suggest this to you if you are doing a factory restore as I don't know what you are using (machine wise)

Clean Reinstall - Factory OEM Windows 7


Some system specs would be very welcome
System Info - See Your System Specs

Read other 1 answers
RELEVANCY SCORE 53.6

Finally decided to wipe my drive and reinstall windows.   PC has been working good but lately started acting strange with intermittent connectivity and the just yesterday all connected wifi devices lost their log info so that was odd.  Today when I rebooted this PC, I saw the original windows start up screen you'd see if during a fresh install or a restore and that's not right.  Finally I took at look at event viewer and saw a new NT user was added and I didn't do that so here we go again.   This time I suspect the vectors is a compromised Gateway which I have reset but will need to replace with better quality equipment than the junk Comcast is renting me.  This prompted me to run Farbar and come back to the forum for help.
 
2nd issue-  I need help with my Norton firewall settings.   I want to lock this pc down except for approved programs.
​Here is the log and thanks in advance again.  Farbar and addition below
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version: 26-12-2017
Ran by Ronin Asus (administrator) on DESKTOP-O7VPJFK (26-12-2017 17:33:55)
Running from C:\Users\Ronin Asus\Downloads
Loaded Profiles: Ronin Asus (Available Profiles: Ronin Asus)
Platform: Windows 10 Home Version 1709 16299.125 (X64) Language: English (United States)
Internet Explorer Version 11 (Default browser: Edge)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-... Read more

A:Clean Windows Install on Wiped Drive- Am I still Clean?

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> https://www.bleepingcomputer.com/logreply/666575 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of this ... Read more

Read other 9 answers
RELEVANCY SCORE 52.8

I think I have a virus or malware and have been unable to get rid of it after many tries, and I am having multiple problems with this home built computer running Windows 7Pro 64bit. I installed a retail version of Windows 7Pro 64bit and I have my original installation disk. I want to do a clean erase of my 480GB SSD and then a clean install of the same Windows 7Pro 64bit. Can you tell me how and provide any cautions etc. Thanks.

A:How can I do a clean erase of my SSD to clean install Windows 7?

Hello Joseph,

If you like, a normal clean install will also wipe the drive before installing.

Clean Install Windows 7

Read other 2 answers
RELEVANCY SCORE 50.8

Let me start out by saying a clean install is the better way to go; however there may be some instances where a motherboard swap without having to reinstall is preferred. If you are like me and want to avoid all of the custom settings, shared drives, etc; then this option can save a LOT of time.
Recently I did this task on my own network storage system or home server. Some more modern parts became available to me for doing a build. Not only was the motherboard swapped, the system drive was cloned from an ide drive to a more modern sata drive. Here is how you go about swapping boards without a clean install.
This will work on both sata and ide type drives however if you have sata and the sata controller mode is set to AHCI or Raid, you may have problems. If your sata controller mode is set to ahci, you can attempt to swap to native ide in the system bios before beginning this task. If it boots using native ide, then you should be able to do the swap. If it does not boot when changing the controller mode, then you are out of luck.
The old motherboard was a NForce4 with a single core AMD FX-55. The new board was an Epox 945 intel chipset with a Pentium D 940. It does not get much more different than those two chipsets/cpus.

With the old board still installed, do the following. During this procedure, DO NOT reboot. Tell the system later for the reboot.
1 Uninstall any software that is dependent on the old board. This would be things like onboard sound driver, onboard nic driver,... Read more

A:Moving a windows install or swapping motherboards without a clean install of windows.

Very informative thanks for posting
 

Read other 13 answers
RELEVANCY SCORE 50.8

Hi
I have looked through solutions for this issue, but the suggestions don't seem to fix my issue...

I am running Windows 7 SP1 Pro 64-bit on a Dell Optiplex 760, and try to do a clean install of Windows 10, using the ISO file which I downloaded from Microsoft & burnt on to a DVD, and instructions from the tutorial on here, which are very good. I downloaded the correct 64-bit version.

I boot from the DVD, enter my region (UK), and choose custom install, and then my hard drive does not show up on the list of where you would like to install. I have all my USB's unplugged (except keyboard/mouse).

I tried deleting my partions using MiniTool Partition Wizard (bootable DVD), so that the entire disk is unallocated. That didn't fix it. I also tried creating a new partition (NTFS) of the entire drive (to get one Primary NTFS partition). That didn't work. I also tried setting that partition as 'active'. The same.

Before formatting etc, I tried a boot from the Windows 7 install DVD, and the hard drive does show up, unlike the Windows 10 DVD.

Do you think it's an issue with the Windows 10 installer?

I downloaded another version of Win10 from the MS Tech Bench page, but same issue.

After formatting etc, during the Windows 10 boot, I tried another suggestion to open up Command Prompt (Shift + F10), and ran 'diskpart' - and no drives are found. I checked the Bios, and it was there.

So presumably that is the issue. If i ran 'diskpart' with my prior Windows 7 install, diskpart sh... Read more

A:Windows 10 clean install - hard drive doesn't show up before install

Welcome toTenforums, Simon.

I am a little concerned that the Windows 10 setup program on DVD does not have drivers to properly see and interrogate the system on your PC so that the hard drive is visible. It's the second similar case on this forum that I've seen recently. You also seem to be trying to clean install on an empty PC - is this correct, because if you do so It will not activate.

After much to-ing and fro-ing, it was finally possible to *copy the Sources folder from the setup ISO file onto a partition on the hard drive, and run the setup from there, where it wasn't possible to boot from the DVD, even though it worked elsewhere.

If you still have Windows 7 installed (and you should do for Windows 10 activation purposes - if just to obtain a genuine ticket for digital entitlement), and you have the ISO download available, the solution is fairly simple. If you haven't you will need the Windows 7 key to activate the install.

You seem pretty PC savvy so, I'd ask you to follow the bolded instructions from the * in the 5th para above.

Read other 1 answers
RELEVANCY SCORE 50.8

Hello,I'm facing some little problems that a clean install would definately solve them, but I'm afraid that if I install onekey recovery afterwords, it won't be or can't be 100% integrated with the system. There's this novo key on the side that it brings onekey recovery if i shut my laptop and then press it, would it work later after a clean install of windows OS and reinstalling onekey recovery?Is there anything that is really useful by Lenovo that I'm going to miss out on, if i do a clean install? Is there any risks at all?Thank U guys

Read other answers
RELEVANCY SCORE 50.8

Hi,

I recently did a clean install of Vista Home Premium x32 and upon completion am unable to connect to the internet. I received the following error: "windows unable to install ethernet controller." Upon accessing Device Manager, I noticed yellow exclamation marks associated with my network controller. I have an Acer Aspire 5536-5224 notebook. Windows could not locate the drivers on the machine and I cannot connect to locate. As a matter of fact, I'm not sure where to begin searching for the driver! Any help you can provide will be greatly appreciated.

Thanks!

A:windows unable to install ethernet controller after vista home premium clean install

Hi -

Try this Broadcom driver from Acer Support --> http://global-download.acer.com/GDFi...e&Step3=Aspire

Acer Support --> http://support.acer.com/drivers_download.aspx



Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 50.4

This is what is happening. A friend gave me his DELL Inspririon 531 2007 Desktop. It has a pirated copy of 7 ultimate x64 (which I am not sure if this supports 64 bit). Prior to looking into how old the machine was, I was able to install 8.1 64 bit. But it wouldn't allow me to install any drivers from the DELL site. Said that the machine wasn't compatible. So, I tried with Windows 7 32 bit and I am getting this error. I have deleted all partitions, but now, I do not have that option when I choose Custom-advanced. There is no Delete option.

A few times I got the error at 5% other times at over 60%. What can I do to get this to install? It is a legit DVD of windows. Why would it have allowed 8.1 to successfully install now it is doing this? What files are missing? I have tried both deleting the partitions and not deleting. Same result.

A:Clean install error Windows cannot install required files.

Install the correct version of windows that`s on the COA, either buy a new installer from Newegg or call Dell for Recovery CD`s.

The dvd you are trying to use is corrupted and no good.

Read other 9 answers
RELEVANCY SCORE 50.4

I purchased a Toshiba Satellite C50 loaded with windows 8 but want to revert to windows 7.

I have downloaded the necessary drivers and have mounted the .exe files onto a USB pen for installation.

Before I proceed to wipe windows 8 I'd like to know - if I install 7, will my trackpad stop functioning?

If so, how do I install the relevant drivers from the USB pen?




Thanks, John

A:Clean install of windows 7 - how to install drivers from USB memory stick?

99.9% sure that W7 will identify the trackpad and install it. You just run the exe's using file explorer or Start >Run then browse. You may decide to leave the laptop as the W7 install left it but you should check Device Manager to ensure there are no unrecognised devices

Read other 2 answers
RELEVANCY SCORE 50.4

My spouses pc all of a sudden wouldn't boot, not into safe mode or anything (vista), and so we were going to upgrade anyways to windows 7, so i bought the upgrade windows 7 and attempted to do a clean install and reformatted the c: drive which has 250gb, and each time i start the install it bogs down and gets stuck on the install files and cycles over and over and never goes anywhere. I also performed a start up repair and it cycles over and over for hours on end, please help!

A:Boot config not working, tried clean install, can't install windows 7

Welcome freakyfrowe

I assume from your specs this is an acer laptop. Check this thread for a lot of ideas.

Questions to use for help with Installation Issues

Disconnect all not necesssary USB devices, printers, ext monitors, TVs, etc.

Also this Tutorial on Clean Install with upgrade disc



Clean Install with a Upgrade Windows 7 Version


Edit: Optimize Hard Drive for Install

SSD / HDD : Optimize for Windows Reinstallation

Read other 9 answers
RELEVANCY SCORE 50.4

Let me start out by saying a clean install is the better way to go; however there may be some instances where a motherboard swap without having to reinstall is preferred. If you are like me and want to avoid all of the custom settings, shared drives, etc; then this option can save a LOT of time.
Recently I did this task on my own network storage system or home server. Some more modern parts became available to me for doing a build. Not only was the motherboard swapped, the system drive was cloned from an ide drive to a more modern sata drive. Here is how you go about swapping boards without a clean install.
This will work on both sata and ide type drives however if you have sata and the sata controller mode is set to AHCI or Raid, you may have problems. If your sata controller mode is set to ahci, you can attempt to swap to native ide in the system bios before beginning this task. If it boots using native ide, then you should be able to do the swap. If it does not boot when changing the controller mode, then you are out of luck.
The old motherboard was a NForce4 with a single core AMD FX-55. The new board was an Epox 945 intel chipset with a Pentium D 940. It does not get much more different than those two chipsets/cpus.

With the old board still installed, do the following. During this procedure, DO NOT reboot. Tell the system later for the reboot.
1 Uninstall any software that is dependent on the old board. This would be things like onboard sound driver, onboard nic driver,... Read more

A:Moving a Windows Install or Swapping Motherboards Without a Clean Install

Read other 16 answers
RELEVANCY SCORE 50.4

Hi

First post in this forum, and already with complaints ;-)

I installed the Windows 8 Release Preview Build 8400 on my computer. I first did an upgrade from windows 7, but that gave me some (apparently ramdon) freezes. I decided to do a clean installation on unallocated space. The same happened 3 times till now. I used the W8 File Collector (see attached W8.zip). It gave me a 'Sorry, No Dump Found'-error. You can also find two printscreens in the zip file.

I only installed a new driver for my nvidia graphics card, and the wireless D-Link adapter.

Can anyone help me out? This is driving me crazy ;-)

Thanks in advance!

Tisse

A:Windows 8 Freezes (upgrade and clean installation)

Have you installed the graphics driver from Weltweiter Marktf?hrer f?r Visual Computing Technologien | NVIDIA?

Base on my personal experience, the nvidia graphics card driver will conflict with windows 8. We need special edition of the driver.

If you haven't do that, go to the link above, choose driver download, then choose option 2 (automatically detect graphics card). Then follow instructions to install.

Read other 3 answers
RELEVANCY SCORE 50.4

Ill try to make this short and simple, i had same pc for around 3 years now, finally managed to ruin my first win 7 instalation by being lazy, that resulting in long needed reinstall, no problem there,
But after everything was done, my pc started randomly freezing for around 1-5 mins ( depends, usually around 3 mins ) then it just comes back alive like nothing happened, sometimes video driver crashes

My first thought was that my hdd finally dying on me, but after numerous test found nothing wrong on any of them and freezes doesnt always occur on hdd usage i ruled that out, some googling blamed it on new video drivers, got other ones, same, still freezing, reseted my bios to default, still same, sometimes i can turn on a game and play 2 hours straight and nothing will happen, next time i can startup movie and it will freeze 2 times in 5 mins, already reinstalled coddecs and video players

i am just running out of ideas here, never had this issue before, using same windows 7, same install, same pc and all of my drivers/programs are same ones i used

A:Windows 7 Freezes/hangs after clean reinstall

If the computer has ever crashed (BSOD), there should be a minidump log. You can check by going to C:\Windows\MinidumpIf there are dump files, attach them to this post. You can also try using a software like whocrashed but it's not as good as using WinDbg.How to read the small memory dump files that Windows creates for debuggingIn addition, review your event log by opening Event Viewer.How to use event viewerJust type event viewer into the Windows 7 start menu search bar. Or, get to it by going to Control Panel > View Small Icons > Administrative Tools > Event Viewer. View your error events.

Read other 11 answers
RELEVANCY SCORE 50

I have the Windows 7 key for the netbook but I was not given an install disc when I bought it from the store.
I believe it originally had Windows 7 Premium home edition on it and I updated it to Windows 7 SP1 Premium Home Edition.

I am having many issues with the OS and wish to either do a repair or a clean install. I'd rather do a repair so as not to have to reinstall everything, but if a clean install is recommended I can do that instead.

How do I go about it, without an installation disc?

A:How do I repair or do a clean install with no Windows 7 install disc?

Hello and welcome Alicia now hopefully you have all your data backed up because what I am going to suggest will wipe it and reset the machine to as it came out of the factory because it will have a special recovery partition for just tis sort of situation..

See this https://lionpress.wordpress.com/2008...tory-settings/

The alternative is to get an ISO for the version you have from somewhere and use the orih=gianl code to activate it.

Another thing you can do is read through this as it will describe how you can use any Windows DVD - a friends or family members one just read it thoroughly if that is what you want to do but make sure you read the bit about the ei.cfg removal tool Clean Reinstall - Factory OEM Windows 7

Read other 1 answers
RELEVANCY SCORE 50

I'm looking to buy a new laptop, seen a few models I like and they all come with windows 7 pre-installed. Problem is they all also come with a dozen or so pre-installed pieces of freeware/shareware/trial software that I have no use for and don't want and I would like to do a clean install of windows 7 when I buy to get rid of all these. How should I go about doing this?

I'll ask the vendors if they could provide me with some sort of recovery CD that will install the operating system and none of the junk but they might say no (I've done a bit of googling and have read they make money off including all these programmes). If they don't give me anything then could I get by with just purchasing an upgrade DVD even though I obviously won't be upgrading anything, just trying to go from bloated windows 7 to non-bloated version.

Thanks for help.

A:Clean install to replace existing windows 7 install

Hello Third Man, and welcome to Seven Forums.

You can just uninstall the bloatware software that comes with the computer in "Programs and Features" in the Control Panel just like in Vista below. Otherwise you would have to purchase a separate retail copy of Windows 7 to do a clean install with, then install all of your drivers.

Uninstall or Change a Program - Vista Forums

Hope this helps,
Shawn

Read other 7 answers
RELEVANCY SCORE 49.2

I can't find my specific install problem on the forum, so here is the problem:

I have a 4 core 64 bit HP laptop (pavilion) with a Radeon graphics card and 16 gig of ram.

I installed W10 over W7 from the laptop microsoft link when the free offer was available. I have two downloaded disks (burned from iso files), one with threshold 2 the other without.

I have tried booting from both these disks without success, the laptop just boots into the problem W10.
In the bios boot from CD is enabled but this makes no difference?

I'm sure I am missing something (maybe the disks are not configured properly but how do I find out?)
Does anyone know how I can get a clean install to work please?

A:Windows 10 re-install (clean install to fix errors)?

Is there a file and folder structure on the DVDs including a setup.exe in the root folder? Or is there just an ISO file on the DVD?

Read other 1 answers
RELEVANCY SCORE 49.2

I want to install a Install Windows 7 Ent on a Elitebook 840 G3 with Samsung NVMe M.2 SSD Disk.Which drivers do I need to integrate in the installation source (Windows 7 Ent)? Does anyone have the procedure?

A:Install Windows 7 Ent Clean Install on Elitebook 840 G3 with...

Hi: Please see this related thread... http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Installing-Windows-7-x64-Enterpr...

Read other 1 answers
RELEVANCY SCORE 49.2

I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.

So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.

However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)

The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.

I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.

I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.

Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?

Thank you in advance.

A:Clean Install of Windows 8 without install disc?

You shouldn't need to enter a product key with an oem machine.

The recovery partition and discs will likely reinstall with all the crapware.

Hard to tell without looking at it. Dell recovery program used to offer an option to reinstall without crapware. Perhaps your oem does also.

Many would like to do a clean install as you describe. Not so easy with win8 oem pre install .

Read other 47 answers
RELEVANCY SCORE 49.2

So I was backing up my computer last night with SyncBackPro, and encountered a BSOD (kernel_stack_inpage_error). Restarted computer, got other BSODs. Now, I haven't formatted my computer in quite some time, but I have the vast majority of my files backed up. Next, this morning my computer would start up, but it had a different boot screen and no programs will run("gdiplus.dll was not found"). I think I should at least do a repair install of XP, but I only have a SP1 disk from Dell. I've read about slipstreaming, but I don't fully understand the idea. Ideas? The computer is old, but has been treated very well. What can I do to revive the computer?

Read other answers
RELEVANCY SCORE 48.8

Please help. Recently after Microsoft Update & changing my virus protection program, my system is acting screwy. Browsing has slowed incredibly and the system randomly freezes, requiring a hard restart.
Any help is appreciated.
Thank You
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:08-06-2015
Ran by David (administrator) on MILLIE on 10-06-2015 22:52:15
Running from E:\Downloads\Programs
Loaded Profiles: David (Available Profiles: David)
Platform: Windows 7 Ultimate Service Pack 1 (X64) OS Language: English (United States)
Internet Explorer Version 11 (Default browser: Chrome)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
 
(NVIDIA Corporation) C:\Windows\System32\nvvsvc.exe
(NVIDIA Corporation) C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe
(Microsoft Corporation) C:\Program Files\Microsoft Security Client\MsMpEng.exe
(AMD) C:\Windows\System32\atiesrxx.exe
(AMD) C:\Windows\System32\atieclxx.exe
(NVIDIA Corporation) C:\Program Files\NVIDIA Corporation\Display\nvxdsync.exe
(NVIDIA Corporation) C:\Windows\System32\nvvsvc.exe
(Microsoft Corporation) C:\Program Files\Microsoft Security Client\msseces.exe
(Siber Systems) C:\Program Files (x86)\Siber ... Read more

A:Windows 7 slow performance. Freezes randomly. Clean virus scan.

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Delete this programs using the Add/Remove Programs applet.KMP Service (HKLM-x32\...\4F6D5E84-5826-4394-9F40-3A9A19165651_is1) (Version: - KMP) <==== ATTENTION===Open notepad (Start =>All Programs => Accessories => Notepad). Please copy the entire contents of the code box below. 
start

CreateRestorePoint:
EmptyTemp:
CloseProcesses:

HKU\S-1-5-21-2367785155-1929964237-1315972698-1001\Control Panel\Desktop\\SCRNSAVE.EXE -> none
ShellIconOverlayIdentifiers: [DropboxExt1] -> {FB314ED9-A251-47B7-93E1-CDD82E34AF8B} => No File
ShellIconOverlayIdentifiers: [DropboxExt2] -> {FB314EDA-A251-47B7-93E1-CDD82E34AF8B} => No File
ShellIconOverlayIdentifiers: [DropboxExt3] -> {FB314EDB-A251-47B7-93E1-CDD82E34AF8B} => No File
ShellIconOverlayIdentifiers: [DropboxExt4] -> {FB314EDC-A251-47B7-93E1-CDD82E34AF8B} => No File
HKLM\SOFTWARE\Policies\Microsoft\Internet Explorer: Policy restriction <======= ATTENTION
HKU\S-1-5-21-2367785155-1929964237-1315972698-1001\SOFTWARE\Policies\Microsoft\Internet Explorer: Policy restriction <======= ATTENTION
SearchScopes: HKU\S-1-5-21-2367785155-1929964237-1315972698-1001 -> {892E9960-FF19-4E21-9450-BAA857CB8A58} URL = http://www.ask.com/web?q={searchTerms}&s... Read more

Read other 2 answers
RELEVANCY SCORE 48.4

Z570 hangs freezes on boot with Black Screen after clean Installation of Windows 10.  Have an Z570 that I wanted to resurect to Windows 10, bought a license, installed and all appeared to be working.  Device manger showed all devices recognised without me haveing to install any drivers.  Then I rebooted it, first reboot after the install and now it hangs on boot after bios and first glimse of Windows 10 startup.  After 3 failed boots, get the option to repair, reset.  Neither have worked.  If it picked up all the devices and found built in drivers for everthing why is there an issue?  I am going to try to install from scratch again, but do not hold much hope.  I cannot go back to windows 7 as I no longer have the media. Any help, suggestions appreciated.  Have you had this issue and found a resolution?

Read other answers
RELEVANCY SCORE 47.2

I need help. I tried to install Win8 Pro on my Dell PC, but I didnt know the clean install was the best way to go and now my computer will not boot to the OS. It boots then goes black. Any ideas?

A:Windows 8 Pro w/o clean install

Welcome to EightForums.

Did you run
How to use Standlone Windows 8 Upgrade Adviser
first?

Read other 3 answers
RELEVANCY SCORE 47.2

Hey guys I was away for a while, and... now I'm back,
Anyways I got a new problem and I'm hoping one of you wise people
here can help me solve it once more.

Well I found my recovery disks for windows XP,
the computer I'm doing the install on is Compaq (the model is SR1520NX).
I'm install Windows XP sp2

Most things run smoothly (when i run the recovery disks it moves to
Compaq PC recovery which I assume is normal).

However the problem is when copying the files during the installation
several files often pop up such as COPY.MSI saying it cannot copy
and I have to options to (abort, Retry or ignore), which I believe causes problems in the installation.
IF I chose to ignore/skip it, after reaching 100% (sorry if i'm not being clear here)
It repeatedly copies all the files again.. I've seen that happen four times with no end result.

I'm looking for guidance and ... basically just what to do.
That computer is the main computer that I use for... mainly everything
so I'm looking to get it fixed asap.

Thanks for your attention.

I don't believe the CDs are at fault here since I have done this once before (a long time ago though.)
There are two recovery disks if that helps (but that's probably normal as well )

As well, there have been several problems with this computer previously,
not only being infected with malware (which is hopefully removed) so if you decide
that information is of any use please ask and i would love to tell you all... Read more

A:Clean install for Windows XP

I have had this problem before I fixed it by going herehttp://www.metacafe.com/watch/506140/clean_any_scratched_cd_or_dvd_with_ease/ it is most probably a dirty cd or a cd wityh scratches.

Read other 14 answers
RELEVANCY SCORE 47.2

The BIOS sequence is set to boot first on the DVD. My hard drive already has win7 but is seriously buggy. The problem here is after I clicked "on press any key", I did not see any option to erase the drive so I ended up to have a windows.old. So it is not a clean reinstall. Help?

Read other answers
RELEVANCY SCORE 47.2

Hello I am trying to get a clean install of Windows 7 on my new SSD. I disconnected my old hard drive, placed the DVD in, pressed any key, got the download bar saying windows etc etc. When the download bar finishes I get to the screen that is shown on step 3. Thing is I only see the background and my mouse, I dont get the install windows box. Then after a few seconds my computer reboots to the download bar and the process goes on infinitely.

Could this possibly be due to me being connected through an Nvidia card? Being that Im running only the empty ssd and not the hard drive with the graphics card installed on it that maybe there is a graphical glitch?

OR is it possibly due to me not setting up the SSD properly? I have assigned the SSD a spot, but I am unsure if I need to go through more steps. Thank you guys in advance

Read other answers
RELEVANCY SCORE 47.2

The BIOS sequence is set to boot first on the DVD. My hard drive already has win7 but is seriously buggy. The problem here is after I clicked "on press any key", I did not see any option to erase the drive so I ended up to have a windows.old. So it is not a clean reinstall. Help?

A:how to clean install windows 7

Welcome aboard learnmore7.

Here you go: How To Clean Install Windows 7

Read other 3 answers
RELEVANCY SCORE 47.2

Hello,

I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...

So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft? Am I going to get any issues from using this key? I've never actually done this before with a COA key so... Help would be appreciated.

Slasher

A:Windows 7 Clean Re-install from COA key

  
Quote: Originally Posted by SlasherIT


Hello,

I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...

So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft? Am I going to get any issues from using this key? I've never actually done this before with a COA key so... Help would be appreciated.

Slasher


I am not 100% sure but the COA key on your laptop is for the OEM version of Windows that came with the system. I believe you will have to use the key that you received with the retail version .
Rich

Read other 7 answers
RELEVANCY SCORE 47.2

I am waiting for the Evo 960 to come out so I can install it and do a "clean" install of Windows 10. Could someone who has done this give me any advice or tips that coudl be useful? What BIOS settings do I need to change so I can boot with the Windows installation ISO image in a USB drive?What specific drivers did you install?Anything else I should watch out for when I do a clean Windows install and any applications that you recommend that I install? I plan to install the drivers and apps from the followinng Lenovo Web site and then install Samsung SSD Magician. Anything else I'm missing?http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P70... and Software|Drivers and Software&beta=false

A:Clean Windows Install on P70

I don't believe it has begun to ship yet so "Could someone who has done this" is unlikely.  You first need to make sure it is recognized in the BIOS.  If it isn't, no driver will help.  When I tried a 950 in a P70, it was impossible to set ATA passwords.  Given that limitation, it did work, but the BIOS identification was wrong.  I tried a clean install, but I don't remember if it was onto the 950.  I created a USB stick from the microsoft site in a UEFI environment and set the P70 to UEFI only.

Read other 2 answers
RELEVANCY SCORE 47.2

Completed the clean install but didn't get to install my drivers yet but created a new profile and set up the operating system. Powered it down and today when I turned it on to install the drivers it won't pull up the sign in screen. I get the blue windows sign in screen background but nothing to actually Sign in.

A:Help! did clean install of windows 7

Hello debz8683 and welcome to Seven Forums.

Hard to diagnose what might have happened but it's possible there was a glitch or hiccup during the clean install. Since this install is so new, I think I'd start all over again. If you're trying to clean install a factory OEM version of Windows 7, you might want to go through these tutorials.

Clean Reinstall - Factory OEM Windows 7

Clean Install : Factory COA Activation Key

And this tutorial has general information about doing a Clean Install.

Clean Install Windows 7

Read other 6 answers
RELEVANCY SCORE 47.2

I downloaded Windows 7 pro from my MSNDAA account and I loaded it and im running it as my os. But I wanted know if i could clean install windows 7 when it officialy comes out on top of the windows 7 I have on my laptop now or erase the windows 7 im running now

A:windows 7 clean install

Yes, you should be able to do that. It wouldn't matter whats on there because a clean install is just reformatting the HD and installing it fresh.

Read other 4 answers
RELEVANCY SCORE 47.2

Hi, i asked this question a while a go, so i thought i would try again lol. I have a Sony Vaio laptop (VGN-S3HP) and it's mashed, won't go into how as it's too long. So i want to do a clean install, i only have a WinXP Home disc, currently the laptop has Home ed, is it possible to do a clean install of Home ed on the laptop?

A:Clean install of Windows XP

I take it you mean that the laptop currently has Xp Pro??.....Yes you can do a clean install with Home Edition but you need to have a valid license key to activate/register it so if this disc has been given to you, you'll have problems without the right/legit key :)

Read other 2 answers
RELEVANCY SCORE 47.2

This is how I use to install WIN7, I had a cd-rom and I just put the the system recovery disc, waited for it to load, then clicked on the command prompt icon, command prompt opened, then i just looked for the partition and folder where my WIN7 installation files are, once there in the folder, i typed setup.exe
The installation screen opened and follow all the steps, selected the partition c: where I wanted it to be installed, and it was fine
Now, I have no cd-rom and system reapir disc, so I opted to use grub4dos to boot "system repair disc" or a software kind of similar called "pcwindowsrecovery" from SD card(2Gb) or a USB drive(1 Gb), my goal was just to open the command prompt and look for my WIN7 installation folder on a secondary partition, everything was normal but when I got to the drive selection to install WIN7, and selected like always the C:, I got this error:
That's not my screenshot, but the error is the same, I have three partitions on my hard drive, with the CD-ROM booting system repair disc, i had no problems, but now with the SD or USB i have problems, I even format the partition but it wont work, do I need to fix anything using diskpart before looking for my WIN7 on my hard disk and run the setup? Any help o method to fix the problem? why with the cd-rom method worked fine, but with the SD and USB, it does not?
I hava the SD card, is there any way I can use YUMMI or grub4dos, to install windows 7 but without having to put the all ... Read more

A:Please help me with a clean install of windows 7

why don't you just clean up and start fresh the normal way. You seem to be drastically over complicating this. Have a look here to get your drive cleaned up, it needs to be wiped after all that partitioning madness.
SSD / HDD : Optimize for Windows Reinstallation

Read other 9 answers
RELEVANCY SCORE 47.2

Hi there,
since when I've upgraded Windows 8.1 to Windows 10, my notebook seems much more slow.
I would like to know if there's a way to do a clean installation of Windows 10 without loosing the base partitions used for the "factory restore".

Thank you.

A:Clean install Windows 10

Do in-place upgrade or clean installation. Don't not re-format hard disk when you install a new windows.
www.technig.com/windows-10-in-place-upgrade

Read other 4 answers
RELEVANCY SCORE 47.2

I have a Win 8 Pro with MC license. I would like to start cleanly by formatting and installing 8.1. Is the ISO available officially for DL? Also will my Win 8 Pro key work with 8.1?

A:Clean install of Windows 8.1?

Hello Wildgoat,

You're Windows 8 Pro key would only work if you upgraded to Windows 8.1 from within the activated Windows 8 Pro. You would have to have a Windows 8.1 product key to clean install Windows 8.1 directly.

Currently, the Windows 8.1 ISO file is only available to TechNet and MSDN subscribers. We'll know more tomorrow (18th) when full versions of Windows 8.1 will be available in retail outlets.

Hope this helps for now,
Shawn

Read other 4 answers