Over 1 million tech questions and answers.

Intel USB 3.0 eXtensible Host Controller won't install

Q: Intel USB 3.0 eXtensible Host Controller won't install

A few usb devices won't be recognized and there is a yellow warning symbol in the device manager of Win 7 that there is a driver that was "installed incorrectly". I did some research on the missing driver name and found it on the Intel support site. I downloaded the Win 7 version. I ran it and it claims that my "system does not meet requirements". It's not seeing an old IDE hard drive (500gig) that I have a an external usb connected enclosure for. Very frustrated and I am not sure why Windows 7 isn't playing nice. I even uninstalled the "incorrect" driver that it stuck me with and restarted the system hoping it would possibly reinstall the drive correctly. No dice. I would greatly appreciate some fix for this as I need to get this drive read to move files from it. It is Fat32 and I can't erase it without deleting everything on it. Plus, the drive isn't recognized when I plug in the usb cable. I will post the error messages to shed hopefully some light on this.









Computer info =

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8149 Mb
Graphics Card: NVIDIA GeForce GTX 660, -2048 Mb
Hard Drives: C: Total - 114370 MB, Free - 71338 MB; G: Total - 715370 MB, Free - 52667 MB; X: Total - 228933 MB, Free - 185746 MB;
Motherboard: Gigabyte Technology Co., Ltd., Z77-HD3
Antivirus: Bitdefender Antivirus Free Edition, Updated and Enabled
--------------------------------------------------------------------------------------------------
Thank you! I hope there is a solution.

RELEVANCY SCORE 200
Preferred Solution: Intel USB 3.0 eXtensible Host Controller won't install

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Intel USB 3.0 eXtensible Host Controller won't install

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Motherboard: Gigabyte Technology Co., Ltd., Z77-HD3Click to expand...

Gigabyte GA-Z77-HD3 Motherboard
Click "Support & Downloads".
Select "Windows 7 64-bit" for the operating system.
Scroll down to "Intel USB 3.0 Driver".
Select the appropriate geographic link to download and save and then install it.

---------------------------------------------------------------

Read other 1 answers
RELEVANCY SCORE 114.4

Dell Inspiron 14 3421
Intel i3 processor
4GB RAM

I had upgraded my laptop from Windows 8.1 Pro 64 bit to Windows 10 Pro 64 bit. All the USB ports worked fine for a few days. Then suddenly, the laptop went off while playing the game Thief. (This usually happens when the laptop heats up too much, not a big deal.)

When I turned on the laptop, the two USB 3.0 ports stopped working. There was no power in either of the USB 3.0 ports. I checked this with a mini USB fan.

I went to the device manager and found a yellow triangle before Intel USB 3.0 eXtensible Host Controller.
When I double clicked on it, in the device status box, it showed "This device cannot start. (Code 10)".

I thought it was a problem with Windows 10 and degraded the OS to Windows 7 Ultimate 32 bit and installed and updated all drivers, hoping it would help. But still the same problem exists with the USB 3.0 port.

Please Help!!

Read other answers
RELEVANCY SCORE 114.4

Solution provided by DELL to a problem I have been unable to resolve on my Lenovo P50 using Lenovo Tools and Drivers. Background Info: I have Windows 7 Ult SP1 Retail on my P50, with two issues.1. MS Paint, Lenovo Battery utility and the Lenovo Network utility would never display a window when opened, just an icon in the taskbar or a splash screen, then absolutely nothing. Mouse would go jittery for about 20-30 seconds. 2. I could not get a USB3.1 external drive dock to work on the USB C port. The external drive dock came with a USB C to USB3.1 cable. Ruled out the dock as an issue. So I uninstalled all Intel drivers, Lenovo utilities and the Graphics drivers to get back to a base Win 7 install and confirmed Paint worked. Reinstalled drivers individually checking system behaviour at each step. I suspect item 1 was resolved by the most recent Lenovo graphics driver bundle. Item 2 is where DELL come to the rescue. The only Win 7 Lenovo USB 3.1 driver (Version 15.2.30.11) will not install on my system manually and fails using any of the Lenovo tools or utilities.http://pcsupport.lenovo.com/au/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P... is a dud. It was originally installed during Win7 install using the built in Admin Account before the OOBE. Uninstalled to investigate both issues. Now it will not install under my user account that is an administartor account. Google turned up DELL have Version 15.2.30... Read more

Read other answers
RELEVANCY SCORE 114.4

Hello to everyone,

So, before some time I had Win 8 and everything was fine. After a while I have had installed fresh Win 8.1 system. After that I tried and tried to make USB 3.0 in function but not successful. Trying everything, reinstalling, looking from ASUS website for drivers, but then I agreed with myself that I will wait until Win 10 came out so I had hope that this will solve my problem but it didn't! :-( I also looked on forums, different threads but no luck. I have got ASUS laptop G55VW (ROG series) and on ASUS website there is no drivers for win 10 (except 8 and 9 Series chipset) and yes, it's good to know if someone could help me, my chipset is HM77 Ivy Bridge.

Thank you in advance!

Ivan

A:Intel« USB 3.0 eXtensible Host Controller driver

Try to download the driver directly from www.intel.com If there is no Windows 10 driver, download the Windows 8 driver instead. You may have to run it in Windows 8 compatibility mode. Right-click on the file and select Properties. Go to Compatibility tab and check the box to set compatibility to Windows 8. Also check the Run as Administrator box. Now it should install OK. It is a good idea to also update the chipset drivers (found in the software section of Intel download site).

Intel's site confuses you and it takes some guesswork to find a driver. Both drivers for USB 3.0 and chipset are in Software section, Chipset software. To save you the trouble, here is the direct link for the USB 3.0 driver. Yes, it says it is Windows 7 only because Windows 8 and 10 are supposed to install a driver automatically through Windows Update. So what! Download it and run it in Windows 7 compatibility mode. It should be far better than Windows Update generic USB 3.0 driver.

Read other 4 answers
RELEVANCY SCORE 114.4

I strongly believe the drivers that Lenovo have on its System Update server for the Intel USB 3.0 eXtensible Host Controller for Win 7 32 bit OS for the models of T430s and X230 are the wrong ones or they are corrupted.  Five times now after I have completed my base corporate image the USB 3.0 ports will be working correctly.  If I install the Intel USB 3.0 eXtensible Host Controller drivers from System Update for Win 7 32bit I will get a stop error and after the restart the USB 3.0 ports will stop working.  I have tested this on two X230 laptops and a T430s.  Same results across the board.   I doubt I?m the only one who has reported this issue. Any way Lenovo can confirm is they are seeing the same issue? Thanks

Read other answers
RELEVANCY SCORE 114.4

The device cannot start. Error 10.

I have installed the drivers various times and the controller will not work.

I have an MSI Z77 GD55

It is a brand new build and it will not pick up the USB 3 controller. Everything else is fine.

A:Intel(R) USB 3.0 eXtensible Host Controller (error 10)

Do you have the device code for the controller (see the hardware device info for the device in Device Manager)? It will have a VEN and DEV number.
Intel's vender number is 8086.

Read other 9 answers
RELEVANCY SCORE 114.4

Hi
I got the same issue. USB extensible host controller not signed by microsoft.
I get error code 52 and my company have policy to only use signed drivers.
 
This cause hte brand new P51 laptop for 2500 dollars not abling to use none of the USB ports.
 
I have win 10. Tried every lenovo chipsset drivers and have the latest and the greatest updates suggestet from Lenono.
 
This just blows my mind that lenovo ships out hardware without signed drivers.  


























driver_signature_usb_host_controller.PNG ?48 KB

A:[P51] Intel USB 3.1 eXtensible Host Controller and Hub Driver

Hello,
 
I have split your reply off from the Intel USB 3.1 eXtensible Host Controller and Hub Driver message thread involving the ThinkPad P50 into a separate one for your P51 for visibility.
 
If I am reading the screenshot correctly, it looks like the digital signature on the device driver for the USB host either cannot be read, is missing, or cannot be verified (which I assume means a connection being made to Microsoft's servers for verification).
 
It seems very odd to me that Lenovo would ship a ThinkPad P51 preloaded with Windows 10 containing an unsigned device driver.  And, if I am interpreting the screen correctly, the driver is actually written by Microsoft, not Intel (the "(Microsoft)" at the end of the driver's name).
 
My initial thought is that somehow the operating system install was corrupted during installation by Lenovo.  It must ben extraordinarly rare event, as I think I have seen it perhaps twice in the past twenty years or so, but that is about the only scenario I can think of where one could find a corrupt file in the preloaded operating system.
 
If this is the case, there's only one solution I can think of, and that's to order the recovery media from Lenovo, wipe the drive, and then perform a clean install of the operating system using the recovery media.  The reason that I suggest doing it this way, as opposed to using the recovery partition, is because I'm concerned that if there's a problem with one pre-load... Read more

Read other 1 answers
RELEVANCY SCORE 113.2

Hi everyone! I've been experiencing some sporadic problems where my PC will not go into sleep mode. I ran powercfg lastwake in command prompt and it came up with Intel (R) USB 3.0 extensible Host Controller. I then tried going to device manager to try and un-check the "Allow this device to wake computer" option but obviously there is no such option for it under Universal Series Bus Controllers. Does anyone know how to fix this problem?
thanks in advance

A:Intel USB 3.0 extensible host controller preventing PC from sleeping

Hi try updating the Driver for the USB Host Controller ...

Read other 3 answers
RELEVANCY SCORE 113.2

I have a Lenovo H50-50 PC running Windows 10 version 1709. The -Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) is waking my PC by itself. I verified that this is the cause by going to the Event Viewer. How can I disable that from happening?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 113.2

I have a Lenovo H50-50 PC running Windows 10 version 1709. The -Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) is waking my PC by itself. I verified that this is the cause by going to the Event Viewer. How can I disable that from happening?

Read other answers
RELEVANCY SCORE 109.6

 
I have a 7720, 17r spec edition. and my usb 3.0 stick isnt working but it does work oni my windows 8 desktop. so far neither microsoft no dell has been able to figure it out.
Im pretty sure it is the Intel USB 3.0 eXtensible Host Controller driver.  but when i try to install the one on the intel website i get a message saying that my system inst compatible. so i tried to download it from the dell website and it says it cant be found!!!

its really disapointing when your brand new computer doesnt work.

A:Intel USB 3.0 eXtensible Host Controller driver for 7720 inspiron 17r special edition

Hi Logan,
I apologize for the inconvenience caused. The driver for USB 3.0 is not available as Windows 8 includes native support for USB 3.0.I will recommend you to  re-install chipset drivers:

Click on 'Start ‘and right click on 'My Computer'.
Click on 'Manage' and click on 'Device Manager'.
Expand 'Universal Bus Controller' and right click on each entry named as 'USB Root Hub' and click on 'uninstall'.
Once done, restart the system and install Chipset drivers from both the links: 


INTEL Intel Management Engine Interface: http://dell.to/XfgiE3Dell Intel HM77 Chipset: http://dell.to/XtphhaCard reader: http://dell.to/VLDhsw
Steps to install a driver:

Click on 'Download File'.
Select 'Single-file download' and click on 'Continue'.
Click on 'Save' and save the driver on the desktop.
Right click on the driver from the desktop and select 'Run as administrator'.
Install the driver following the on screen instructions.
Restart the system after the installation is done. 

Once the chipset drivers are installed, make sure you install all the Windows updates and restart the system.
 Update the BIOS in case the issue is not resolved:

Click on the link: http://dell.to/12zxqbA
Click on 'Download Now'.
Select 'Single-file Download' and click on 'Continue'.
Click on 'Run' and follow t... Read more

Read other 30 answers
RELEVANCY SCORE 109.6

Hello!
I was upgrading my Latitude E5530 with Samsung 850 EVO SSD. I have downloaded OS reinstallation image from Dell support page and put it on USB flash stick. I have replaced HDD with SSD and began clean install.
First surprise was error window telling I need CD/DVD with drivers for my hardware. I saw recomendations to give Intel RST driver, it was recognized, but that did not wort, I could not continue installation. At this time USB flash stick was in USB port on the left side of the notebook.
Next I put the stick in the port on the right side of the note, and it worked like a charm, the system was deployed in 6 minutes.
Next it was attempt to install drivers. I have manually installed NIC driver, then Dell Command Update and let it install drivers. That attempt was messed. Particularly, laptop BSOD'ed on  Intel USB 3.0 eXtensible Host Controller Driver installation. In the next attempt to install same driver I get error it was unable to install.
I have tried once over, and installed drivers manually in prescribed driver installation order. At #3 there is  Intel USB 3.0 eXtensible Host Controller Driver. When I install it using setup program, laptop gives BSOD. In the next attempt to install same driver I get error it was unable to install. I knew I have to unplug all USB devices and install this driver from the drive, no matter, still BSOD.
In both cases I noticed left side USB port was not working at all, and other worked intermittently, accepting USB s... Read more

Read other answers
RELEVANCY SCORE 109.6

I have been tasked with rebuilding a handful of old(ish) Dell E6330 laptops. All with the same hardware specs, 7 series/C216 chipset family. I am losing sleep over this and could really use a fresh perspective.
 I am starting from a base Win 7 64 bit OS, provided by Dell. I have been able to update all of the drivers including BIOS except the "Intel 3.0 extensible host controller" whenever i try to install it, it gives me the BSOD just after installation.
 When i go into device manager, it shows installed, but none of the usb 3.0 ports work (which is all of them). However, when i hook the laptop up to a docking station, i can get the 2.0 ports to work, so i have a work around.
 I noticed that after i get the BSOD, under "Universal Serial Bus Controllers" in device manager, there is a Unknown Device listed in there. Though there is no yellow exclamation identifying there is something wrong, when i open it, it says "No drivers are installed for this device" when i select update driver it says the best driver software for your device is already installed (Intel R USB 3.0 Root Hub).
 
Any help is appreciated!

Read other answers
RELEVANCY SCORE 102

Recently Upgraded: Running Windows 7, 64-bit on MSI Z97 ATX board with Intel Core i7-4790K processor. I installed the drivers from the CD that came with the board from MSI.

My usage is strictly internet, e-mail and office applications. Occasional other usage is to connect additional hard disk via internal SATA and scanning for viruses and malicious programs. I do not overclock or play games.

I am trying to determine whether there is any real benefit to keeping the following:
"Intel USB 3.0 eXtensible Host Controller Driver". I thought USB3 drivers were already in W7 so why do I need this driver from Intel? I've read this; but, it never gets into whether it is an essential program or what functionality might be lost if I uninstall it.
"MSI Super Charger". I've read this; but, I can't see any real benefit, The only thing I charge from this computer is my phone and I am very well satisfied with its charging time.

 

A:Solved: What is "Intel USB 3.0 eXtensible Host Controller Driver"

Read other 16 answers
RELEVANCY SCORE 94

Hi, i have an HP Pavilion 17-G133CY laptop and i am planning to put an SSD in it for a little while and installing Windows 7 on it for fun.  I know that HP does not provide drivers for Windows 7 and i can just extract the files from the Windows 10 Driver files and should be able to install them on Windows 7.  I am able to get most of the drivers for Windows 7 but one driver is missing and i think i know why.  USB 3.0 Driver is not for download and i think that is because when Windows 10 was released USB 3.0 was implimented on more computers that it was when Windows 7 was out.  i am looking for the driver or hoping that when i install Windows 7 and run updates that it is able to get the USB 3.0 driver or i can download one that will work on Windows 7 and allow me to use all 3 of my USB ports.  I don't want to be stuck with 1 USB 2.0 Port nor USB 2.0 speeds.

A:AMD USB 3.0 eXtensible Host Controller

@Dudefoxlive Did you try this one??? http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_139250_1 REO

Read other 2 answers
RELEVANCY SCORE 90.8

I'm getting this BSOD on a new Windows 7 system. I ran the dm log collector (zip file attached) and I have updated my system spec. I hope you can tell me what driver to install. I'm new at this. Thanks!

A:BSOD related to USB 3.0 eXtensible Host Controller Driver

Hello, perkinw. You have several dump files. Some of the will not open correctly, but here are the results of the ones that will.


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800524e3b4, fffff880124a33f8, fffff880124a2c50}
Probably caused by : iusb3xhc.sys ( iusb3xhc+4e3b4 )
Followup: MachineOwner
That is your Intel(R) USB 3.0 eXtensible Host Controller Driver


Code:
iusb3hub
start end module name
fffff880`05828000 fffff880`0588b000 iusb3hub T (no symbols)
Loaded symbol image file: iusb3hub.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
Image name: iusb3hub.sys
Timestamp: Thu Oct 30 05:05:14 2014 (54520D5A)
CheckSum: 00066231
ImageSize: 00063000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Intel(R) USB 3.0 Hub Driver and this is your current driver


Code:
iusb3hub
start end module name
fffff880`05828000 fffff880`0588b000 iusb3hub T (no symbols)
Loaded symbol image file: iusb3hub.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
Image name: iusb3hub.sys
Timestamp: Thu Oct 30 05:05:14 2014 (54520D5A)
CheckSum: 00066231
ImageSize: 00063000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
fffff880`1296ca88 fffff880`0f2f58bbUnable to load image \SystemRoot\... Read more

Read other 9 answers
RELEVANCY SCORE 90.8

So, I have a brand new HP Pavilion 15 Notebook PC. The other day, all the USB ports stopped working. Looks like I have a couple unknown divices missing drivers. This is what I get.. AMD USB 3.0 Extensible Host Controller 0100 (Microsoft) Code 28.  I cant find this driver anywhere, even on the AMD website. I've also updated my BIOS and chipset and just about everything else I can think of and the USB ports still dont work. They get power, I can charge a phone through them, but the laptop doesnt see what is connected.  Anyone know where to find this driver? Thanks

A:AMD USB 3.0 Extensible Host Controller 0100 (Microsoft) Code...

Hi @KFM1 , Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue on your HP Pavilion 15 Notebook and the USB not working correctly. Please note remove any and all USB devices. Disconnect all non-essential devices. I would go to the device manager and uninstall any USB devices. Restart the notebook. Here is a driver for your Notebook and Windows 8.1. I would be happy to assist if needed. How Do I Find My Model Number or Product Number?Please let me know. Thanks.

Read other 2 answers
RELEVANCY SCORE 90.8

I need the AMD USB 3.0 eXtensible Host Controller, I have an HP 110-217C with Windows 7 Prof.
The Universal Serial Bus (USB) Controller is missing in the Device Manager
Thanks

Read other answers
RELEVANCY SCORE 89.2

Greetings! I'm currently working on reinstalling win on my cousin's y580 with following specs:Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz8GB RAMGEFORCE GTX 660M Everything went smoothly until the part where I want to install USB 3.0 drivers (responsible for 2x3.0 USB and 2.0 USB port). I tried everything from installing win7 drivers, uninstalling and reinstalling them with Windows Update to forcing INTEL drivers intalation. So far no luck. Browsing the forum I happened to find the topic: https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/USB-3-0-Ports-Not-Working-Y580/m-p/3457050#M149... , where the guy assumes that motherboard is broken cause he bought it with "broken USB ports". That is not the case, ports were working just fine on win8 until the moment win10 was introduced. In the device manager the driver shows the error 10. I also came for advice to my friend using the same notebook with better specs(i7) and they are working fine for him. So my question finally is: have anyone solved this problem for the given spec already and/or is it the case of the 64bit system(not fully supported with those specs)? I am frankly out of ideas rn. Cheers, Hubert  

Read other answers
RELEVANCY SCORE 89.2

I used the Dell Command Update and the Dell Support page to locate the latest drivers.
Listed for the Optiplex 7040 was the USB 3 eXtensible Host Controller (See attached Image)
The version 4.0.6.60, A4 - Chipset_Driver_CWGRX_WN32_4.0.6.60_A4_01.EXE
If you check the detail info, the Optiplex is not listed as systems it covers.
Once I installed it I got the OS error "Windows failed to start. A recent hardware or software change might be the cause"

A:Optiplex 7040 - Latest USB 3 eXtensible Host Controller Driver v4.0.6.60 cause OS not to Boot

AaronCooper,Start the computer and tap the F12 key. Enter Safe Mode and uninstall the driver or choose from the F12 List., Last Known Good Configuration.

Read other 2 answers
RELEVANCY SCORE 84.8

Hello friends,

I'm having problems trying to install Windows 7, hopefully you guys can help.

I own an HP Stream 13 like this one here: Amazon.com: HP Stream 13.3-Inch Laptop (Intel Celeron, 2 GB RAM, 32 GB SSD, Cobalt Blue) with Office 365 Personal for One Year: Computers & Accessories

It came with Windows 10 pre-installed. I get free access to Windows products via dreamspark through my school. I decided I wanted to download Windows 7. I got through the setup and ended up at the partition part where it says:
"Windows cannot be installed to this disk. Windows needs the driver for device [Intel SD Host Controller]. Click 'Load Driver' and load the required device driver."
I have tried downloading Intel's automatic driver detection utility thing, but that did not work.

I have also tried Shift+F10, diskpart, list disk, sel disk 0, clean. But it came with an error in the command prompt that says:
"Virtual Disk Service error:
Clean is not allowed on the disk containing the current boot,
system, pagefile, crashdump or hibernation volume."

I'm at a stump. Any help is greatly appreciated.

A:Unable to install Windows 7 [Intel SD Host Controller] driver needed?

Hi Uni,
W7 likes to be installed as No1, even on a virtual Drive.
Your best bet is to install 7 and make 10 the virtual,
BUT
if you only have 2gb Ram, then you'll have to use 32bit versions, or buy more Ram

The drivers should available via the HP website for that model

Roy

Read other 1 answers
RELEVANCY SCORE 81.2

I am in desprete need of help. I was having issues with my intel usb 3.0 ports so I thought I would try uninstalling the drivers then reinstalling them however whenever I try to reinstall them I get a message saying "Your computer does not meet minimum requirements" It's important I get these working as it's the only ports my capture card work in. Anyone know a work around or anything I am kind of desperate here, I need the capture card for an upcoming event.

Sabertooth Z97 motherboard, Windows 10

Read other answers
RELEVANCY SCORE 80.8

I?m downgrading a ASUS N550LF-CN100H from windows 8 to windows 7 Pro x64.

But when I try to install the driver "Intel(R) USB 3.0 eXtensible Host Controller Driver" the system crash.
I have installed the latest version of the BIOS (2.12) and changed some settings (for W7).
- Boot -> Lunch CSM = Enabled
- Security -> Secure Boot Control= Disabled

I have tried with the driver coming from the Intel site and with "Driver Genius" (same driver).
Do you have any advice to solve this issue because Asus doesn?t give any support for downgrade ?

Thanks

A:"Intel USB 3.0 eXtensible Host Cont. Driver" Crash during installation

Did you try the support section of Asus to download drivers. See this link and change to your model
ASUSTeK Computer Inc. -Support- Drivers and Download X550LA

Read other 7 answers
RELEVANCY SCORE 72

All three towers (Optiplex 780, 390, Inspiron 620) need according to driver detect, Intel ME5 Host Embedded Controller Interface Driver. Numerous attempts to install and they say success until I check again!  Is there a proper procedure to install? Or can it be ignored?
  

Read other answers
RELEVANCY SCORE 72

All three towers (Optiplex 780, 390, Inspiron 620) need according to driver detect, Intel ME5 Host Embedded Controller Interface Driver. Numerous attempts to install and they say success until I check again!  Is there a proper procedure to install? Or can it be ignored?
  

Read other answers
RELEVANCY SCORE 70.4
A:need intel ich8 family usb universal host controller drivers!

They're included in Windows...

You need to have Service Pack 1, preferably SP2, to get USB 2.0 support in Windows XP.

You may need to update the Intel Chipset drivers though: http://downloadcenter.intel.com/Det...&OSFullName=Windows* XP Home Edition&lang=eng
 

Read other 1 answers
RELEVANCY SCORE 69.6

i have been having problems out of my computer and i have been poking around so i went into my computer propertys and tere was a yellow triangle box with (!) that in the center with intel(R)ich9 family usb universal host controller 2934 2935 2936 2937 2938 2939 and usb root hub there is two of them and i cant remove them atlest if there is a way i dont know how. plus i put in my flash drive to try and lisen to some music but it wouldnt even pick it up on the computer and my dell dock wont even come on there is alot of things that wont work on my labtop

A:infected intel(R)Ich9 family usb universal host controller/usb root hub

Hello joseph92,

Right click on the affected device and select properties.

What is listed in the "Device Status" box?

Read other 2 answers
RELEVANCY SCORE 69.2

Hi,
I'm looking for driver for Intel SD Host Controller device, a part of Dell Inspiron 14 3452, for Windows 7 x64
Device ID: ACPI\VEN_8086&DEV_0F14 or ACPI\80860F14 as it appears in Windows 10 installed there now.
Hardware identifier apps detect that that's part of Braswell chipset.
 
Please help with finding the driver.
 
What I checked:
1. Intel and Dell driver download resources, including www.dell.com/.../advanced drivers for chipset, including extraction of drivers from all relevant driver packages.
2. Intel's and Dell's Update apps to find drivers.
3. Whatever Windows 7 installation app gets from the internet when pointed to go online at the start of Windows 7 installation, as there is an option to get drivers from internet at the beginning if Widows 7 installation is running from under Windows 10.
4. Alternative websites and forums for drivers.
5. Driver packages from other vendors for their laptops using likely the same hardware.
6. Drivers for Windows 10 and Windows 8.
7. Dell's support including phone based ones.
8. Intel community.
9. BIOS update - done, didn't help.
Nothing helped.
 
Details:
I can't get drivers for Windows 7 using Windows Update as now I have Windows 10 installed on that laptop. I can't use any kind of driver downloader app as now I have Windows 10 on a laptop I need drivers for, and that downloaders can get drivers only for OS version they are installed on. I need that driver to install Wi... Read more

Read other answers
RELEVANCY SCORE 63.6

I have a set of HP Z210 Workstations with E3-1245-V2 Xeon Cpu's, SSD boot drives and varying sizes of memory from 8-16GB 1600Mghz DDR3 ECC. We use Windows 8 Enterprise for these machines, with Hyper-V enabled.
We get regular driver failures from the 2 sets of USB controllers on the machines (Mainly and issue for the KB & Mouse) that can only be resolved with a full power down (not restart) and a power up. This happens at least once every 1-3 days per machine.
I had gone through the HP support, but they have advised this isn't an issue on their side, and I had agreed all along. I was just hoping to get some traction by notifying them. Anyway, after a lengthy trouble shooting session, we found that once Hyper-V
was enabled, the fault arose.
As it was an Intel chip, they I asked them. They advised that on Windows 8, the drivers are supplied via windows update and that it was not their issue.
So, how can I get this resolved? Not through HP or Intel, surely through MS? Maybe not. Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization. Also, we have templates ready for Hyper-V, I don't really
want to remove Hyper-V and use Virtual box or VMWare workstation. but I am at wits end with the fault and lack of help from the vendors.
Please help.

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure. 

Read other 3 answers
RELEVANCY SCORE 60.8

New HP Desktop with Windows 7 x64 (and latest upates). All USB ports are down because of driver error. Tried to install drivers from manufactures site (HP) and from Intel. Everytime I see the Code 52 error in device manager. I have tried everything that
I can think of. Any ideas how I can get this to work?

Read other answers
RELEVANCY SCORE 55.2

I am confused, as I'm not really that good at computers. Does this update format your computer as I have a lot of things in my computer. Please help, I have SP2.

A:Intel - Storage Intel(R) ICH9M-E/M SATA AHCI Controller Windows update

Hi smalis,Your image shows two Microsoft updates:1) MS Security Essentials virus definition update. (this should automatically update in the background)2) Intel Storage Sata Controller.Neither update will "format your computer" but my recommendation is NOT to download (#2) Intel Sata Controller from the Microsoft Update site. This type of driver from a stability and reliability standpoint is best obtained from the manufacturer of your motherboard or the manufacturer of your computer system (Dell, HP, etc) if it is OEM.

Read other 1 answers
RELEVANCY SCORE 51.2

Hi,
I recently bought Lenovo Y410 notebook and it came with windows vista home premium. As i want to install WinXP in my notebook, i tried with the WinXP CD available with me. But it didnt work, so i tried slipstreaming using nlite when i came to know that intel ich8m sata 3 port SATA Storage controller 2828 is the name of my SATA controller. But even then i am not able to install winXP. After copying all the installation files, the installation process doesnt move forward after rebooting. I am not getting the blue screen, but booting is not happening even after all the installation files are copied.

In short, i just want to install winXP on my laptop.
Inorder to try the AHCI disabling option, i checked in the advanced tab of bios, but such an option was not at all available there.
Pls help.

Read other answers
RELEVANCY SCORE 51.2

i have pentium4 2.4ghzcpu,intel 845gvsr motherboard,128mb ram,samsung 40 gb hdd.i have xp os installed.whenever i start pc a message appears,"new hardware found"usb host controller,though i insert motherboard cd it does not installs hardware,what should i do?
 

A:usb host controller

windows has detected new hardware .. it will install the drivers for it if it can otherwise it will ask for a cd .. you can also check out windowsupdate.com
cheers
 

Read other 2 answers
RELEVANCY SCORE 51.2

When I plugged in my wifi adapter in the usb slot I got the message saying I had a high speed device in a non high speed usb port. This left me a little puzzled since this is a fairly new mobo [Dfi LanParty nf4]. It recommended me getting a High Speed USB 2.0 host controller, so I checked my mobos disk and it had nothing under USB so I'm out of luck. The adapter says its running at 54mbps, so is there no problem?

Thanks,
AJ
 

A:Usb 2.0 host controller?

Is your windows XP SP2, if it isn't you need to update it to SP2. If it is SP2 go to My Computer, then view system information, then hardware, then device manager, then click the + next to Universal serial bus controllers, then uninstall all USB controllers, then restart. Once you start up in windows XP and plug in your Wifi card it will search for USB controllers, if any boxes come up just press next and let windows scan and install the drivers( USB drivers come with SP2, you dont need a CD). This should solve the problem.
 

Read other 4 answers
RELEVANCY SCORE 51.2

Hi,

I've got a dual booting (Win 98SE/XP) Pentium II 400 MHz PC with a Aopen AX6BC Motherboard Bios 2.58. I tried connecting an external hard drive to the PC the other day and a message said I needed a High Speed Host Controller as one was not found, the Motherboard has only 1.1. I bought a PCI USB 2.0 Host Controller, installed it but the PC will not recognise it. Can someone tell me if I need to install a EHCI Driver when I can't even find OHCI in the BIOS Setup? I know a bit about the BIOS but not a great deal so can any help that's forthcoming please be in laymans terms, thanks.
 

A:USB 2.0 Host Controller help please

If it isn't recognized in either 98 or XP, I recommend changing the USB adapter for one that has a different brand of chipset on it.
 

Read other 1 answers
RELEVANCY SCORE 50.8

I am having a problem getting the computer running Vista Home Premium to load the driver for my USB card that I put in the computer. It recognizes the card, and it tells me that it is installing the driver, and then it tells me that the installation of nec pci to usb open host controller has failed. In device manager, it has the feared yellow asterisk on the nec pci to usb open host controller, both of them.
I have replaced the motherboard with a new one, exactly the same as before, an Intel D945GCFG1 motherboard. It seems to hang up when booting up, but eventually it boots up. Would this have anything to do with the installation of the nec pci to usb open host controller driver?

Read other answers
RELEVANCY SCORE 50.8

Hi,
I found this old thread which relates exactly to the problem I am experiencing:


Ricoh SD Host Controller
--------------------------------------------------------------------------------

I am able to install this , and get an updated driver off windows update.
HOWEVER, in device manager, I see this message with a yellow "!"

This device is not working properly because Windows cannot load the drivers
required for this device. (Code 31)

Click 'Check for solutions' to send data about this device to Microsoft and
to see if there is a solution available.

Any ideas how to fix this?

And there was this answer:


RE: Ricoh SD Host Controller
I figured out the problem. I have the Inspiron 6400, so your mileage may vary.

When I updated the device Ricoh SD Bus Host Adapter (under SD host adapters
in device manager) it messed up the Ricoh MMC Host Controller. So I went to
device manager and rolled back the latest version for the SD bus Host Adapter
(I am now using version 6.0.5384.4 dated 6/21/2006) and the problem was
fixed.

So the MMC controller device driver wasn't really the problem. It was just
the symptom.

Hope this helps.

"BoDEAN" wrote:

I have tried to do the same but my "driver roll back" link is faded and therefore not available.
Each time I uninstall and then install the driver it says the driver is up to date (version 6.1.7601.17514) but in Device Manager I still got the yellow triangle with the exclamation mark ... Read more

A:SD Host Controller driver

Hi,

Please go to your PC's manufacturers website & download the original/ updated by them driver.

This will fix the problem.

If you need further help please provide the make, model & operating system information to get the links. OK?

Read other 3 answers
RELEVANCY SCORE 50.8

Today I got a WD usb 3.0 PCI-e card. WDBFJ0000NNC


I installed the software on the CD it came with. Then I put the card into a free PCI-e slot. When I restarted the computer, windows gives a message that the device driver was not successfully installed. Specifically the "NEC Electronic USB 3.0 Host Controller". Any external hard drives (All WD drives) I plug it is not registered by windows.

In device manager the "NEC Electronic USB 3.0 Host Controller" has a caution (exclamation)on it.
If I look at the card, it lights up so power isn't a problem.
Does anyone know how to get the card to work?
I don't know much technical language so any simple instructions would be appreciated.

OS: windows 7 home premium 64 bit
motherboard: Intel H67 Revision B3
CPU: I5-2310

A:USB 3.0 Host Controller not found

Hi,

You should have plugged it in first, and then installed the software.

Uninstall the software, reboot, and then try and install it again. Leave the device in the PCI-e slot.

Regards,
Golden

Read other 9 answers
RELEVANCY SCORE 50.8

I know this is a well documented situation and I have seen and read a lot of information about the problems others have had with the USB 3.0 Host controller. My situation is that I have followed several different solutions only to wind up with USB's on the 3.0 hub not working after reboot. I have uninstalled and reinstalled drivers, tried this solution with several different recommended drivers for my Dell Inspiron 14z. I have also followed solution that has me delete the INFCACHE.1.
So what I have seen in my case which I have not seen anyone else talk about specifically is this.
If I leave my USP cables plugged into the computer on restart I loose all USP 3.0 functionality, when I try to run the USB 3.0 Host Controller Utility I see that I get the message "USB 3.0 Host Controller Not Found". If I unplug my USB cables and restart (or shut laptop down and then unplug USB 3.0 and restart) I get full USB 3.0 functionality. I have to wait until I see the login screen on Windows 7 home premium 64 bit to plug in the USB cables, if I try befor this I see that the Hub is recognized during BIOS then lost during the beginning phase of OS boot.

When I leave the USB cables plugged in and restart the BIOS stalls about half way through and instead of taking about min to run bios and boot to login screen it can take anywhere from 5 to 10 min to boot to login screen (USB is recognized during BIOS but lost during OS boot).



I am attached to a 1TB WD Passport external hard... Read more

A:USB 3.0 Host Controller Not Found

Do you have the latest BIOS installed?

Also, check BIOS for a setting for USB Legacy. It should be either ENABLED or AUTO - AUTO is an option. (USB Legacy is needed to support USB before Windows starts... and your description mentions USB not working till Windows starts?).

p.s. Please update the Dell model # in your System Specs

/* EDIT */
do NOT disable USB Legacy

Read other 9 answers
RELEVANCY SCORE 50.8

My SD card slot does not work.
I am able to install this , and get an updated driver off windows update.
HOWEVER, in device manager, I see this message with a yellow "!"

This device is not working properly because Windows cannot load the drivers
required for this device. (Code 31)

Have carried out an sfx /scannow but no corrupted files are reported.
Any ideas how to fix this?


My computer's make is Advent and I cannot get any joy from anyone online regarding my problem. I have posted to the Advent's forum and again, no one seems to know or answer.
These are the details:
Advent fp9004
Windows 7 Home Premium 32bit.

If you can provide a link to a driver's update, will this install automatically after downloading, or do I need to force the installation and what is the recommended way?

I would be very grateful for any information.
Ton

A:Ricoh SD Host Controller

Hello & welcome to sevenforums,

If you get an updated driver from Windows Update it means its on your computer now, you could manually try to install the Ricoh driver from the Device Manager .


from the device manager right click, search manually on your computer the path.

Follow this tutorial:
Driver Install - Device Manager

You could try to locate the driver name in C:\Windows\System32\DriverStore\FileRepository



If not working...the only link i founded for ricoh drivers v6.0:
ftp://ftp.hp.com/pub/softpaq/sp37501-38000/sp37872.exe

Download the softpack sp37872 and extract it with 7-Zip for 32-bit Windows

Before:
Create yourself a restore point

Run the Setup.exe inside the extracted folder sp37872.

Note:
You can also manually install the driver from the Device Manager by pointing the search to look at the extracted softpack sp37872 if running the setup.exe doesn't work properly on your machine.

Read other 9 answers
RELEVANCY SCORE 50.8

Hi ALL
I have bought a new HP pavilion 17-p001sa it is a win8 laptop. I prefer win 7 but it seems the manufacturers
don't want to produce win 7 machines. My problem is I changed the boot to legacy and loaded my win 7 ultimate OS now comes the problems 1 USB ports do not work I have the AMD Host controller and chipset drivers for win 7 but they are on both USB and DVD Both will not load I can understand USB not working but the DvD should work. but open files will not work to let me load them. It is not a bootable dvd any ideas please

Read other answers
RELEVANCY SCORE 50.8

Hi, I found the USB-IF xHCI USB Host Controller in device manager not compatibale and the error is (This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)).The operating system is Windows 8.1 64bitI have a Spectre XT Touchsmart 15t-4000.Please need yor support to work this device properly. 

Read other answers
RELEVANCY SCORE 50.8

Hello, I bought a USB audio recording interface and in the fine print contained in the manual it says that VIA USB host controllers are not compatible. Can the host controller be changed or is this a motherbooard issue?
 

A:USB host controller problem

Read other 6 answers
RELEVANCY SCORE 50.8

I have an acer aspire sa90 with 0 upgrades running vista home premium service pack 1.

I have been having a problem with my usb 2.0 host controller "standard enhanced pci to usb host controller" when it is enabled my wireless network adaptor "belkin N" is not detected, I therefore have to run my pc with the controller disabled which means all my usb 2.0 ports are now 1.1.

I have tried reverting pc back to factory settings to no avail, Ihave tried uninstalling the controller I have tried updating the drivers but I have the latest version already. I tried downloading a hotfix from microsoft that seemed to be for my problem but when I try to run it says it's not for my version of windows even though i got it from the vista section

I am at a loss here I don't want to have to do a clean install mainly because i haven't got a copy of vista any help is much apreciated.

A:problem with usb 2.0 host controller

update i have been to acers website but they don't have the drivers i have run several scans on my system and they all tell me that my usb ports are all microsoft ports. so i am unable to find out who has made my ports to try n get updated drivers.

Read other 1 answers
RELEVANCY SCORE 50.8

Hi All,
I believe my computer had a virus and damaged windows xp home installation, most motherboard devices were showing the error message. I have completed a XP Repair and have got all devices working except for USB Host Controllers and thus the USB Ports.
When i go to 'Device Manager' and click the USB Controllers i get the yellow triangle / exclamation mark.
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I have deleted devices and scanned for hardware changes - no change.
Completed Second Repair - No Change
SP2 & SP3 - No Change.
Can i get ports working again or perhaps are ports unrepairable ?
Really can't format at this point.

Any Ideas guys ?

Thanks in Advance
 

A:USB Host Controller - Error 19

are they enabled in bios?
 

Read other 2 answers
RELEVANCY SCORE 50.8

Hi,
I have just reinstall my operating system and everything goes smoothly except that I found an yellow exclamation mark in 'NEC PCI to USB Open Host Controller' under Universal Serial Bus Controller.However when I turn off my PC,I encountered problem in swithing on again.I have to continuously press the startup button in order for it to boot again.Is that yellow exclamation mark the cause of this problem?If not,then what has happen to my PC?How do I get rid of that eclamation mark?I am running on windows XP Pro Serv.Pk2.Thank you for your advice and rescue!
 

A:NEC PCI To USB Open Host controller???

Read other 16 answers