Over 1 million tech questions and answers.

Remote Access Server error...pls help!!

Q: Remote Access Server error...pls help!!

Operating system: Windows XP Home

Thurs. nite, something happened to my computer, where files in \WINDOWS\SYSTEM32\CONFIG\SYSTEM were corrupt or missing. This has happened before, so I threw in my Windows disk and "repaired" it.

I immediately ran the Norton Antivirus (which had updated that morning). HijackThis (nothing unusual), Adaware6 and Spybot.

I have not had a problem doing this before. However this time, I cannot get online. The two error messages I've received are:

Remote Access Server Error. A device attached to the system is not functioning.

OR

Remote Access Server Error. The request is not supported.

I uninstalled Compuserve, then reinstalled, but still get the same error messages.

Also, about 14 hrs. after the computer bombed, Nortons found a "virus":

Virus name: Suspicious Script
Feature: Script Blocking
Action Taken: Blocked
Suspicious action: File System Object: GetSpecialFolder
I called my internet server (Compuserve) who told me that I needed to uninstall, then reinstall DUN.

Please help. I'm at a friend's house, as I can't get online, so my responses might take time.....

Thanks,
Wendy

RELEVANCY SCORE 200
Preferred Solution: Remote Access Server error...pls help!!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Remote Access Server error...pls help!!

If I have to reformat the hard drive, and start from scratch, that would be ok, too. I have the Windows XP Home Edition CD. Just need the best way to do that to restore to the original settings. Computer is only 2 months old, and I do not have anything "vital" that I can't replace.....
Please help!!

Read other 3 answers
RELEVANCY SCORE 61.2

in order to install this modem that im trying to hookup...i need to close down the remote access server...but i don't know how to do it!!! please help!
 

A:remote access server

Go into control panel > services and look for the remote access server service and stop it. You can do it from a command prompt as well by opening a DOS window and typing

NET STOP "REMOTE ACCESS SERVER" /Y

Use the NET START "REMOTE ACCESS SERVER" /Y to start it again
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hi! please help.

I can't connect to my server remotely from another site... Both sites A and B has internet connection. Site B is where my server is and Site A is where Im accessing it.

problem is I can have ping replies to any computer from Site B to Site A.. but I cant do the same in reverse (request timed out)...

I already checked firewall settings on both sides but there seems to be no problem at all.. This just happen all of the sudden. worst is both sites have internet connections.

have you experienced the same problem before?

need help please..
 

Read other answers
RELEVANCY SCORE 60.4

Sorry if this topic is in the wrong section. Not sure where it goes.

I would like to setup my server to allow remote access from home. It's on an office network which is separated from the WAN by a router. So long as I'm on this network, I can access the server from any computer connected to it. I enter the https URL of my server through IE and it brings me to the helm interface (the one that comes with Windows Server 2003). I can click on Maintenance and then on Remote Desktop, and it opens a new window with the server's desktop displayed.

If I'm somewhere other than the office network, I can't access it. IE gives me a "can't find webpage" message (or something along those lines). How do I setup my server to access it from outside the office network. I'd prefer to have a similar graphical interface as Remote Desktop.
 

A:Solved: getting remote access to my server

You should be able to access it from anywhere using the MS remote desktop client that ships with xp. The catch is that you have to set your router up to forward all remote desktop requests (port 3389) to your server's ip. From the outside, put IP that your ISP assigns to your router in the remote desktop client and it should open up a login screen. The other option would be to set up an IPSEC connect on your router (if it will let you). Then you connect to your router with IPSEC VPN and it's like your on your network... where ever you are.
 

Read other 2 answers
RELEVANCY SCORE 60.4

I will attempt to be as clear and concise as possible. The situation is that a company is being purchased by another company. Company A is being asked for information by company. Company B wants all of the information required to remotely access company A's servers as soon as the transaction is completed. The problem is company A no longer has IT support or even anyone onsite who is capable of providing this information. Company B has specifically requested a domain password. I have been given this responsibility because I am the closest thing they have to support. I have established remote access between personal computers in the past. But never a company server. How can I direct those onsite through the process of accessing the required information from their servers and then possibly setting up a vpn or remote test to make sure it works? Is a domain password all that company B will require to remotely access servers and network of company A?
 

Read other answers
RELEVANCY SCORE 60.4

Hello,
I've just started with a small company who already have AD and a file server, exchange, etc. They currently use webdav or RDS to remotely access files on the server and everyone complains about having to imput their username and password to open a file and how slow it is. I'm trying to find the best solution to give them access to the files without using the cloud. The main office, where I am has AD. 2 Remote offices have no infrastructure, but using laptops provided by us with domain cached credentials. Then there are 2 people in another country who work from home. I thought VPN either client based for everyone or static between the offices with each office having a DC and syncing files a few times a day. I'm just not sure that is the right choice for such a small company. Circa 30 people. 12 in main office, 5 in the other two offices. Also good to mention, the two other offices do not have a reliable fast internet connection. Please, what solutions do I have without using the Cloud?
 

Read other answers
RELEVANCY SCORE 59.6

I am trying to add a new remote desktop to my Server, but when i go to Computer Management Console the Local Users and Group branch is missing? I can't find it anywhere and want to know if it could be hidden or moved or something? Anyhelp is much appreciated, I've attached a print screen of my Computer Management Console (which is missing the Local Users Group)
 

Read other answers
RELEVANCY SCORE 59.6

I have this application where I want a new hire to fill out an Access record for their application. I want the HR receptionist to be able to control that new hire's use of the computer. I thought I would have the NH (New Hire) go to a computer logged into the terminal server and enter their data. I would have the receptionist create the record and get them started and the rest would just be a fill in the blanks and click the next button. A former network administrator set me up so when I click on the Remote Control to a terminal server user, I can connect without them having to give me permission. I want to set the receptionist up the same way, but I don't neccesarily want to give her admin rights. is that possible?
 

Read other answers
RELEVANCY SCORE 59.6

I have to share some PDF files with members of my organization, I have a Windows XP Pro box dedicated for this. Currently they can access it from within the office as a shared folder. I would like to make it available remotely is there a better way other then as a FTP access.

Tom
 

A:Setting up remote access file server

Yes. VPN access.
 

Read other 1 answers
RELEVANCY SCORE 59.6

I couldn't find a Windows Server2003 so i figured i might still get help in this forum...

I am trying to add a new remote desktop to my Server, but when i go to Computer Management Console the Local Users and Group branch is missing? I can't find it anywhere and want to know if it could be hidden or moved or something? Anyhelp is much appreciated, I've attached a print screen of my Computer Management Console (which is missing the Local Users Group)
 

Read other answers
RELEVANCY SCORE 59.6

Description of Systems:
Two independent family companies, each with their own LAN, FILE SERVERS and WIN98 Workstations, each operating independently and successfully using different workgroup names. One company is using WIN2000 Server and the other WIN2000 Pro on the file server and all workstations use WIN98. Both FILE SERVERS are using NTSF file system on the partitioned drive for the files being shared. Everybody has DSL. I am wanting to be able to work from my home and access the files, via the internet, on each file server.

Observations:
- I am able to intermittently map to the “WIN2000 Server” fileserver using a WIN98 workstation via the internet.
- I am able to consistantly map to the “WIN2000 Server” fileserver using a “WIN2000 Server” workstation via the internet.
- I am unable to map to the “WIN2000 PRO” fileserver, using a WIN98 workstation via the internet.
- I am able to map to one of the WIN98 workstations on the WIN2000 PRO network.
- I am able to ping the “WIN2000 PRO” fileserver but unable to map to the file I need.
- In all cases I am able to ping and/or connect, using PCAnywhere, to any and all servers and workstations from my workstation at home via the internet.

Please help!!!
 

A:Remote access to file server via the internet

Make sure that NetBIOS is bound to your network card on the server/PC you are trying to connect to. Big security risk doing this though...anyone can access your files!! If you have a firewall open to the proper ports with letting static IP's in thru them then you should be fine.
 

Read other 1 answers
RELEVANCY SCORE 59.6

I work in a small company with around 40 employess and most of them access our server through remote desktop connection. Most of them have limited capabilities and some were assigned admin rights.
Few days ago someone tried to mess with some confidential folders and we couldnt even open them logged in as administrator. Is a 2003 windows server. My question is if theres a way to track the activity and find out who might have done the changes? The IT guy said there is no way to track it, but since it must have been through one of those remote sessions I think probably theres a way?

Thank you
 

Read other answers
RELEVANCY SCORE 59.6

Hi Team,

I plan to get a mac mini. I would like to have direct access to the machine remotely, just like i did when i connected my laptop pc to my desktop pc via VNC.

My specific question :- is it possible to access the mac via a remote client so that it opens in a window on a Win7 64bit I7 pc?

I ultimately want to control the mac desktop via my win7 pc, mouse and keyboard.

Thanks in advance.

A:Remote Access to Mac mini via VNC client/server

Why wouldn't you just install VNC on your new Mac machine, allowing it to be controlled from the PC?

The product itself is cross-platform.

There are downloads for each host and each client environment.

I'm not a Mac person and only use VNC for Windows hosts and clients. But the product's description certainly shows it as being intended to be cross-platform capable.

Read other 2 answers
RELEVANCY SCORE 59.2

Hello all,

I have a LAN with four Windows XP Pro clients connected to one Windows Server 2003 machine.

I want to access the files in the server when I go abroad. How can I do that ? I've already given all the clients and the server a static IP.

Another question, are there any security threats that I must be aware of when I connect to the server remotely? I don't want to lose all my data!

Please help. Thank you.
 

A:Remote file access - Windows Server 2003

Read other 6 answers
RELEVANCY SCORE 59.2

Hey everybody,

Im hoping someone here can help me out. I am running Outlook 2007 on my laptop and Exchange 2003 on a personal server located in my apt.

When I am in my apt. connected to my wireless, as expected, I have no issues sending/receiving email through exchange.

When I am on the road however, I am obviously unable to connect to my exchange server. I setup a VPN tunnel that works successfully and when I manually dial the VPN connection or manually put outlook into offline mode (so that it dials the VPN connection), I am able to successfully get my emails through exchange.

My question is, is there away to setup outlook such that I dont have to manually dial the VPN or put it in offline mode? I set the exchange server account settings to automatically detect my connection status, but it is detecting my network connection as being ok, even though the Exchange server is not located on that network and needs to be dialed in.

I know it sounds lazy and it is, but Id rather not have to manually do anything, especially if I decide to give some of my less computer literate friends email addresses in my domain. Id rather not use IMAP and SMTP due to security issues having to open the ports on the firewall.
 

A:Outlook 2007 Remote Access to Exchange Server

Read other 6 answers
RELEVANCY SCORE 59.2

I have a Windows 2000 Server in my home office. Two people need to access this server remotely.
What can I do so these two people can gain access to files that reside on the 2000 Server?

I once had a static ip address that enabled the two users to gain access to the server.

Thank you for looking.
 

A:Setting up remote access in Windows 2000 Server

The simplest way is to configure an FTP server on the server. That doesn't require any special handling. If you don't have a static IP address, you can use DynDNS or a similar service to map your dynamic IP address to a static URL.
 

Read other 3 answers
RELEVANCY SCORE 59.2

specifically, having problems with a dial up user accessing internet remotely. gives ip address, but ip address is same as default gateway, and have to remote into server, using pcanywhere or the sort to access internet. running routing and remote access and NAT.
 

A:windows server 2003 remote access problems

http://www.catb.org/~esr/faqs/smart-questions.html
 

Read other 1 answers
RELEVANCY SCORE 59.2

I am having a very frustrating problem with unauthorized and silent/secret access of my computer. No matter what operating system I install, I am always setup as a client, and someone immediately gains access and control over my entire system. I become unable and authorized to make changes that will prevent or stop this access. I have tried making a windows 7 lite version myself, but either I do not eliminate the correct services or features that I need to, or I eliminate too much and the system does not work correctly or install at all. I do not know anything about group policy, or the snap ins, or the management console, where I know is the solution. I have tried, but while I make changes, they are reverted immediately back, and I am locked out, or lose access to those settings, or my system is shutdown remotely and it locks up, or I screw the system up and it won't boot. I am hoping someone here knows how to eliminate all possibilities, back doors, tunnels, pipes, blue tooth access, remote access, remote assistance, and or any and all third party access to my machine etc. that will permanently disallow and deny any and all remote access, remote desktop, remote assistance, Bluetooth access to my pc except for myself- one user, one log in. I hope this is the correct place to request that sort of thing on here. Or if there is one setting I can change, or service/process I can change, disable or eliminate, to stop this once and forever, I would be greatly appreciative. When I ... Read more

A:remote desktop and access, and server / client nightmare

Can you edit your post? Use some paragraphs to make it more easily readable to increase the chance of someone helping you.

Also, please do the following:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the results of the tool here in your next reply

Read other 1 answers
RELEVANCY SCORE 59.2

What do I need to do to make a XP machine connect to a Remote access server. This is an apple computer that establishes the connection and then the users can browse a Windows 2000 domain.
 

Read other answers
RELEVANCY SCORE 59.2

I have a Microtik router and can't figure out how to make my IP address static. I believe this is why my remote access on Plex is not working. Please help!
 

Read other answers
RELEVANCY SCORE 59.2

Hello,

I have installed SQL Server Express 2008 on my desktop and am attempting to connect to it from my lap top. I have enabled remote connections for SQL Server and opened up a port on my desktop. When I attempt to connect to the server instance from my laptop via ipaddress\sqlserver with the Windows 7 firewall turned on and the port open, the attempt fails. However, if I turn off the firewall and attempt to connect via my laptop the connection is successfull.

I followed the steps to open up the port:To enable port 1433 on Windows 7
On the Start menu, click Control Panel.
Click System and Security.
Click Windows Firewall.
Click Advanced Settings.
In the Windows Firewall with Advanced Security on Local Computer dialog, click Inbound Rules.
In the Actions panel, click New Rule?.
In the New Inbound Rule Wizard, click Port, and then click Next.
In the Specific local ports: box type 1433. Ensure that the (default) TCP radio button is selected and then click Next.
Ensure that the (default) Allow the Connection radio button is selected and then click Next.
Clear or select the Domain, Private, and Public checkboxes as appropriate, and then click Next.
In the Name box, type an appropriate name, such as SQL Server Port, and then click Finish.

Can anyone offer up any suggestion on why I can connect with the firewall turned off, but not when it is on?

Any suggestions are greatly appreciated!
Win7Newb

A:Remote Access to SQL Server Express 2008 Windows 7

  
Quote: Originally Posted by win7newb


Hello,

I have installed SQL Server Express 2008 on my desktop and am attempting to connect to it from my lap top. I have enabled remote connections for SQL Server and opened up a port on my desktop. When I attempt to connect to the server instance from my laptop via ipaddress\sqlserver with the Windows 7 firewall turned on and the port open, the attempt fails. However, if I turn off the firewall and attempt to connect via my laptop the connection is successfull.

I followed the steps to open up the port:To enable port 1433 on Windows 7On the Start menu, click Control Panel.
Click System and Security.
Click Windows Firewall.
Click Advanced Settings.
In the Windows Firewall with Advanced Security on Local Computer dialog, click Inbound Rules.
In the Actions panel, click New Rule….
In the New Inbound Rule Wizard, click Port, and then click Next.
In the Specific local ports: box type 1433. Ensure that the (default) TCP radio button is selected and then click Next.
Ensure that the (default) Allow the Connection radio button is selected and then click Next.
Clear or select the Domain, Private, and Public checkboxes as appropriate, and then click Next.
In the Name box, type an appropriate name, such as SQL Server Port, and then click Finish.

Can anyone offer up any suggestion on why I can connect with the firewall turned off, but not when it is on?

Any suggestions are greatly appreciated!
Win7N... Read more

Read other 6 answers
RELEVANCY SCORE 58.4

Greetings,

I have an amazon cloud server running server 2016 os and have been using a splashtop business account which provides a single remote user access to it (multiple users can only share a session and cannot have their own unless you go to enterprise which requires additional infrastructure).

I now have a requirement to have more than 1 user(1-5) remoting into the machine and working in 5 seperate windows users sessions.

I am wondering if someone can reccommend a safe and secure software solution that will not break the bank.

pretty much all of the remote access solutions i have looked up so far are geared towards single user access or they depend on you having an existing IT infrastructure of some sort to basically host the ras/vpn software services.

I would love to find something simple similar to logmein, splashtop, gotomypc etc. that supports multiple user sessions and is safe and secure.

In previous situations where more than 1 users is required to login I would simply just open rdp access in aws firewall to the end user static ips to give end users access via RDP, however in this case they need to be able to access it from multiple locations which have dynamic internet ips.

I am looking for something safe, simple and inexpensive. 2 step verification would be great..

I am familiar with vpn solutions like neorouter, hamachi (from years ago) but not sure how they stack up with regards to security when compared to splashtop pro, logmein pro etc. nor am i sure... Read more

Read other answers
RELEVANCY SCORE 58.4

Hi there,

On Linux, we can easily enable remote access to MySQL server, but on Windows, I got no success so far ( a client tried to connect to MySQL on the server)

Here's the steps to do that (on the server computer):

1. Open a DOS command prompt on the server.
2. Run the following command from the mysql\bin directory:
mysql -u root --password=
3. A mysql> prompt should be displayed.
4. To create a remote user account with root privileges, run the following commands:
GRANT ALL PRIVILEGES ON *.* TO 'USERNAME'@'IP' IDENTIFIED BY 'PASSWORD';

'USERNAME' is the username to be created.
'IP' is the public IP address of the remote connection.
'PASSWORD' is the password to be assigned for this username.
(IP can be replaced with % to allow this user to logon from any host or IP)

mysql> FLUSH PRIVILEGES;
mysql> exit;

So it is. But I couldn't connect to that MySQL from another computer, both are Windows XP.

If you have any experience, I'd like to receive your help.

Thanks in advance.
 

A:Solved: How to enable remote access to MySQL server on Windows XP

Oh, I got it. It's due to my Windows Firewall. Just turn off it (unsecured) or add MySQL port (e.g. 3306) to the WFirewal's exception.

Have fun!
 

Read other 1 answers
RELEVANCY SCORE 58.4

If I should not Post this on this forum, feel free to help me and tell me a forum for this.

The other day, I built my first server (Well, not really built it, It was an HP Pavilion XD) I set it up perfectly with Windows Home Server 2011 and when I went to set up remote access, I get this (the attachments)


My router is a Linksys WRT160Nv2. I set up UPnP and did what Microsoft said here for my router: Windows Home Server Router Setup - TechNet Articles - United States (English) - TechNet Wiki

Any help?
P.S. My ISP is Wave Broadband here in Bow, Washington.

A:Remote Access not working on Windows Home Server 2011

Well, the first thing we need to know is, does the server have a static IP address or Dynamic? Normally a server will have a static IP address but sometimes not.

1. Check for a static ip address
2. If not static, change it to a static ip address

Report back what you find and we'll dig a little more.

Read other 12 answers
RELEVANCY SCORE 56.4

Hi. I have been using AVG free however when I got this new PC I cannot open the avg.com site or anything that is connected with it. What comes out is "ERROR: COULD NOT LOCATE REMOTE SERVER" What should I do? Thanks
 

A:Error: Could not locate remote server

You sure there wasnt some kind of downtime? did you try www.grisoft.com ?
 

Read other 1 answers
RELEVANCY SCORE 56.4

I got a message saying "Remote Server Error". This occured on my Opera and Firefox browser. I cannot view any websites on Opera and Firefox, but I am able to do so on Interet Explorer. Currently I have Firefox set as my default browser. It's really strange because I was able to use Firefox and today I can't.

Please help.

A:Remote Server Error Message

Hello,

What security programs are you running?

Read other 1 answers
RELEVANCY SCORE 56.4

Hi guys

I've been going to this a particular law site for sometime now, just recently I could not log on to it.
Now I know The site could be no more, but I very much doubt that given it's content, or it could be down, when sites are either down or gone it is usually quite obvious.

My problem is this
It keeps coming up with a 502 Proxy Error. Now I have no idea what that means and even the explanation is vague. IE:The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /sectors/inheritance-probate-trusts-and-wills/.

Reason: Error reading from remote server.

What is it and what can I do if anything to rectify it.
The site holds a lot of info I require.

Thanks guys

sincerely yours
pavlos
 

A:Error reading from remote server

Well, if you had provided a URL for the site, we'd have more to go on...
 

Read other 3 answers
RELEVANCY SCORE 56.4

Error! Could not locate remote server
this problem appear since a few days ago. when i try to access a normal site, it appears the *[Error! Could not locate remote server]* page and i have to refresh but doesnt work sometimes then i have to use IE and it works sometimes but sometimes doesnt work and i have to refresh again. I usually use opera. i think its my router but b4 i didnt get that problem. and also, a movie in my computer that i played, i see connecting to codec server, then error downloading codec. i think its also the same problem.
 

A:Error! Could not locate remote server

Hi Shakya!

The problem here could be with your DNS settings. It is the DNS server which is usually responsible for translating a domain name to the domain server and redirecting a website request. Something like www.google.com > 208.67.219.230

What you can do is that ping your DNS server and see if the response time is slow. IMO anything less then 400ms is good.

If the DNS seems slow then you can use a public DNS such as open DNS. Just change your DNS seetings to manual (in you rrouter if you are using one, else in your modem/computer as applicable) and change the values to

Primary DNS - 208.67.222.222
Secondary DNS - 208.67.222.220

This is in case you wish to use Open DNS. To know more about this service you can check out their website @ www.opendns.com; There are plenty of other free public dns servers so you can google them and ping them to see which one gives you a better response time.

Hope this helps!

Cheers!

P.S- Just to make sure, to ping you dns, check your network connection properties and note down the values in front of DNS servers; Next open a command prompt (Start > Run > cmd > OK/enter) qnd type 'ping <DNS SERVER VALUES>' without the quotes qnd press enter: This will show you the response time of your DNS server.
 

Read other 3 answers
RELEVANCY SCORE 56

On Windows7 Pro,  trying to run IIS.  The way I am used to execute is  on the browser "localhost".  I used to have the code in the directory  C:\inetpub\wwwroot.   Even before I copy,  I am hoping to see
the image IIS welcome page.  Once it is successful, want to copy the code as that was the way I used to do in Window XP.    However I am getting the following message.  I have administrator access to the machine and gave full permissions
to the folder  'C:\inetpub\wwwroot'.  Still the same message. 
Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Can someone help me to address this issue.  Thanks a lot in advance. 

A:Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Hi,


You can click the IIS hyperlink in my previous post or using this one

http://forums.iis.net/


Regards,

Vincent Wang
TechNet Community Support

Read other 19 answers
RELEVANCY SCORE 56

Hello, I have a connection to verizon dsl, and I'm getting that message "unable to connect to remote server. Its actually my sisters pc that's getting this and she's driving me crazy! I need help fast!

I have her using Opera and IE 6, I have antiVir running on her system and windows firewall also.

Please any help would be apreciated!
 

Read other answers
RELEVANCY SCORE 56

My cousin and I are trying to use remote administarator, but and error keeps poping up when I try to connect to his computer, the error says can't connect to server, could you help me figure what is wrong?
 

A:Remote Administrator ERROR:Can't connect to server

Hiya and welcome

Which version of Windows are you running?

Check you connection to the remote host via TCP/IP
At a command prompt, type: ping remote_host_name
Ex: ping 10.0.0.1
Ex: ping myserver.mycompany.com

Do you get any response?

Regards

eddie
 

Read other 2 answers
RELEVANCY SCORE 56

I`m using windows 8.1 64x
with MTS mblaze ec1561 and When in try to connect its says that 
remote computer doesn't respond
or a connection to the remote server could not be established
while on my (Friends)laptop it work like charm with same settings and same network configurations but win 7 64xbit
and before i was on win 7 it works for me too.
*Things i tried*
reconfigure network settings
dialing through dialing rules
reinstalling drivers and mobile partner

Read other answers
RELEVANCY SCORE 56

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped ... Read more

A:Linked Server from SQL Server 2008 to Access 2000 db gives error

Read other 7 answers
RELEVANCY SCORE 55.2

Hi there,

I have installed "Remote Server Administration Tools" on my Win 7, 64 bit machine so that I can monitor our server from my workstation. But I am unable to enable the server. If I click on "Remote Server Administrator Tools" (under Windows Features) and click OK, I get this message "An error has occurred. Not all of the features were successfully changed".
Do you know what could be the problem? No luck with googling...

Many thanks,
Jenish

Read other answers
RELEVANCY SCORE 55.2

Hello,

I have been using Dreamweaver for several years now and this is the first time I have received this error.

When I try to connect to the host I get a message that says the host is found. Then I get another saying it is verifying connection. This verification goes on for a while then I get "connect to host lost.' When I click on okay I get the "Dreamweaver cannot determine the remote server time."
When I click okay I get another error "An ftp error occured - cannot get remote folder information."

I have a cable modem with 2 computers set up through the modem. I uploaded Dreamweaver on the second computer and tried to connect. I get the same errors.

I have a co-worker in a different location who is able to connect to the host with no problem.

I am using Windows XP

Thank you for any help you can give.

Regeth
 

A:Error: Dreamweaver cannot determine the remote server time

Read other 8 answers
RELEVANCY SCORE 55.2

I get the above message when I am trying to connect to a wireless network through my new archos. The Archos asked me to manually type in connection information. I located the IP address, Netmask (Subnet Mask), Gateway, and DNS server by selecting 'run' from the start menu, typing in 'CMD' and typing 'ipconfig/all'.

A reply to another thread on this site 'Error! Could not locate remote server' by Shakya, suggested that the problem could be with the DNS settings. I have pinged www.google.com on my PC and the result was approx 40 ms. I have also noticed that the Archos only allows for info for one DNS server whereas the PC uses both a primary and secondary DNS server.

Am I looking in the wrong place for the connection information as I have tried different IP address's and DNS server numbers. The other IP addresses etc, I have used, come from my ISP home page which is eircom broadband. Is there a reason they differ from the info given on the 'CMD' function.

I would appreciate any advice you can give me on this matter.
Many thanks
 

A:Archos 605 wifi Error Could not locate remote server

To what wireless network are you trying to connect? Why are you not using dynamic addressing?
 

Read other 2 answers
RELEVANCY SCORE 55.2

I have an HP a1610n PC running XP. I got some kind of virus/trojan yesterday and now I can't get on the internet.It was one of those fake virus scanners that came out of nowhere and started running.I used Avast 6.0, Malwarebytes and Superantispyware but I still can't get on internet.I have Time Warner cable. My PC is plugged into my Netgear Router, which works, and I am getting on web with my laptop wirelessly thru the router.I have tried System Restore but it doesn't work.i hope there is an expert who can help.Thanks

A:No Internet-Cannot locate remote server-error 1068

Please...do not post another duplicate of your topic, which has been moved to what appears to be the appropriate malware forum. The personnel there will assist you.

http://www.bleepingcomputer.com/forums/topic426623.html/page__p__2465716#entry2465716

This topic is closed and will be deleted soon.

Louis

Read other 1 answers
RELEVANCY SCORE 55.2

I have an HP a1610n PC running XP. I got some kind of virus/trojan yesterday.It was one of those fake virus scanners that came out of nowhere and started running.I used Avast 6.0, Malwarebytes and Superantispyware but I still can't get on internet.I have Time Warner cable. My PC is plugged into my Netgear Router, which works, and I am getting on web with my laptop wirelessly thru the router.I have tried System Restore but it doesn't work.i hope there is an expert who can help.Thanks

Read other answers
RELEVANCY SCORE 54

Hi everyone,
Got error msg (Installer encountered and error: 0x80070003) when trying to install Remote server administration tools for windows 7. Any idea?
Many thanks!

info:
win7 pro 64bit sp1
admin access
package from: KB958830

A:Error when trying to install Remote Server Administration Tools for Windows 7 (0x80070003)

error: 0x80070003. The system cannot find the path specified.
Are you running the installation from a network share ? Try it locally.Benoit Lecours | Blog: System Center Dudes

Read other 2 answers
RELEVANCY SCORE 54

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 54

I have gone to the remote access and tried to click on start because it says stooped...
but says I am denied... I am the only person on the pc... am set as adminstrator but it won't let me start remote access or remote access auto manager.....
Can anyone help me here?

Thank you so much

Xpwannabe
 

Read other answers
RELEVANCY SCORE 53.6

Howdy,

I need to set up my Win7 desktop so I can access it (and my home cloud) from the road with my Win7 Laptop. Should be pretty simple...except, the Remote Access Functions DO NOT APPEAR on the [System Properties] pop-up on the [Remote] Tab

See pic attached..

Cannot fill in the form, if the form ain't there.

Heeeep, please.
 

A:Remote Access: SystemProp>Remote>NO Remote Functions Visible

What version of Windows 7 is installed on your computer?


 

Read other 9 answers
RELEVANCY SCORE 53.2

Hey guys, I'm trying to set up a network at home and an running into an error when I try to get on my server. FYI I am running Windows 7 but the server is XP. Pic included.
 

A:Remote Desktop Access Error

You have a user permissions issue. Do what the message tells you with the account you are logging in with.
 

Read other 3 answers
RELEVANCY SCORE 53.2

Hello everyone,

Can someone help me on this problem to our cctv network remote access?
before its working properly when oneday i got a surprised and recieved this error.
Please help...
Thanks,
Allan Perez
ERROR

The requested URL could not be retrieved
While trying to retrieve the URL: http://122.49.210.122/
The following error was encountered:

Access Denied. Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
Your cache administrator is root.
Generated Mon, 05 Jul 2010 03:52:08 GMT by proxy (squid/2.6.STABLE21)
 

A:CCTV Remote Access Error

Are you sure that's the correct IP address?
 

Read other 1 answers
RELEVANCY SCORE 53.2

One day my internet slowed to a crawl. I'm not sure if my brother downloaded anything (he is pretty much computer illiterate) so I ran a virus test, spybot yada yada yada, removed some tracking cookies etc. It didn't help at all. I flushed the DNS and re-registered the DNS through ipconfig and I think that's where stuff got screwy. I read the event viewer and I found this multipe times, probably because I kept restarting the computer to try and fix the problem:





The Routing and Remote Access service terminated with service-specific error 340 (0x154).Click to expand...

Anyone have a fix for this? I try to start the process with services.msc, but I get this:





Windows could not start the Routing and Remote Access on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 340.Click to expand...

I turned my computer off, powered down and unpluged my router from the computer, and plugged the cable modem directly into the computer. It worked like a charm. The only problem is, my dad needs the wireless access the router delivers.

Any ideas would be appreciated. :knock:
 

A:The Routing and Remote Access error

Hi,

I found a similar problem just recently. The problem seemed to be created when MDAC 2.8 was installed. I installed MDAC 2.8 SP1 and this appeared to fix the problem. I can't say why it caused a problem but this was my experience. Good luck.
 

Read other 2 answers
RELEVANCY SCORE 53.2

Hi everybody ,
I had a small problem with my laptop a few days back ,but it was fixed when I removed and inserted the battery. But the F drive was renamed to D drive automatically. I think this was the cause of the following errors, which i noticed when I tried to use my Reliance Netconnect+ datacard and Error 711 (Cannot load the Remote Access Connection Manager Service) showed up.

I tried system restore but i noticed it was disabled and so there were no restore points.

A little research showed that Now I have the following errors:

I cannot start Remote Access Connection Manager (Error 2:Cannot find the specified
file) and cant start Remote Access Auto Connection Manager (Error 1068: The dependency or group failed to start). Both services are set to manual.
(Target file is svchost.exe -k netsvcs).

System File Scanner showed no error.
So some please help me to start these services and fix the netsvcs if its corrupted, so that I can use my datacard in peace!

Thank you guys.

A:Not able to use Datacard because of REMOTE ACCESS error

I would try an uninstall/reinstall of the software for your data card.

Read other 2 answers