Over 1 million tech questions and answers.

Presicion T3600 during install Windows Server 2008R2 RAID driver problem

Q: Presicion T3600 during install Windows Server 2008R2 RAID driver problem

Hello ,

I have a T 3600 and when i want to install Windows Server 2008 R2 , i have a problem with RAID controller PERC H310.
I found drivers , during instalation process system say "no any HDD found" , i try to load drivers from USB
Load Driver
Browse - and show drivers folder on the USB
unmark chechbox "Hide drivers that are not compatible with hardware on this PC"

then i see list of the drivers ,
I select PERC H310 (from usb F:\drivers\folder\ percsas2.inf) - not working - still no HDD found
PERC H310 Adapter (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
PERC H310 Embedded (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
PERC H310 Mini (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
PERC H310 Intergrated (F:\drivers\folder\ percsas2.inf) not working - still no HDD found

Please help me to find driver with can be works properly

Read other answers
Preferred Solution: Presicion T3600 during install Windows Server 2008R2 RAID driver problem

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


We are a small medical practice, apart from the usual horizontal business applications we are running an EMR and a PM system (DBMS based applications; MS SQL Server 2008R2 & Firebird).
We have 4 servers in our network: two db servers for our EMR / PM and two domain servers ? one primary DC the other one the backup DC.

Last weekend I wanted to connect our network to a new ISP ? As this one is working on a different local subnet (10.0.10.x vs. 10.0.1.x), I needed to move the network to that new subnet.
Before I went ahead I used the free 2<sup>nd</sup> Ethernet port on our dual adapterC to create a bridge between the two subnets to test the service.
Everything looked fine ? until I broke the bridge to go ahead and tackle the subnet reconfiguration. The primary network adapter where the existing network was connected to, showed errors in the sys tray ? driver problems. Looking at the IP4 configuration
I saw that the gateway address of the adapter (static set up) was missing.
I de-installed and subsequently re-installed the driver. After a while the adapter error was popping up again with missing addresses in the static configuration.

I uninstalled and re-installed the driver another time. When the errors continued to pop up I removed the NIC and installed a new one. However it looks like the adapter errors had somehow damaged our PDC installation.
Here are the symptoms:

Our HP network printer is not printing anymore from the server... Read more

Read other answers

I have been having intermittent crashes BSOD and the bugcheck and memory dump come up with pciidex.sys Here is the memory dump
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\KyleE\Desktop\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: Server, suite: TerminalServer
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`01a49000 PsLoadedModuleList = 0xfffff800`01c8d670
Debug session time: Wed Aug 1 08:29:59.067 2012 (UTC - 7:00)
System Uptime: 1 days 12:51:20.660
Loading Kernel Symbols
Loading User Symbols

Loading unloaded module list
* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debu... Read more

A:Windows Server 2008R2 BSOD PCIIDEX

Can you post the Memory Dump files here

Have you updated your server after installation?
take a look at this
Data corruption occurs when you write data to a partition on a disk through an IDE port or a SATA port that uses IDE emulation on a Windows Server 2008 R2-based or a Windows 7-based computer

Read other 8 answers


I'm trying to delete a folder with one file in it. No matter what I try, it tells me, the domain admin, that access is denied. It won't let me take ownership.

Is there a way to get around this and get this Autodesk POS off my server?

Attached is a screenshot of the denial.


A:Unable to Take Ownership of Folder in Windows Server 2008R2

This is what I used for same problem:

Add "Take Ownership" to Explorer Right-Click Menu in Win 7, 8 or Vista

after you download, and right click on folder "Take ownership" shows.

Read other 3 answers

This is my home server I use for DLNA, backup, main storage, and streaming:
Windows server 2008 R2
Intel Core i5 3570k
asus P8z77-i Deluxe
4x Samsung f4 2tb
LSI megaraid 9260-4i
8gb Samsung 30nm ddr3
40gb Intel 320 SSD(boot)
60gb Corsair Force GT(windows server 8)
500gb Seagate Momentus(temp install files)

Originally the server had x4 635 amd processor etc and I had a perc 5i card in there and my server worked great, I had no issues at all nor when I upgraded again to i7 2600k server and threw down a megaraid lsi card in there. I was able to transfer with ease and got extremely high copy rates etc. and of course streaming was flawless.

Now that I've upgrade my system(just a week ago) I've been stressing on trying to get my system to what I had before. I CANNOT copy ANY files from or to the server through mapped drives which I mainly use to access the server itself; streaming, storage, etc. I'll get a copy popup and it'll transfer at 16.kbs and even though the file was 1meg> it simply freezes.

Accessing the mapped drive has been a nightmare, requiring me to wait minutes before being able to enter folders or even open up files becomes worst; I cannot even stream a 7meg Mp3 at all. Before I streamed my entire library of music directly off the server and had no issues at all.

I've tried: swapping routers(wndr3700-r6300) both gigabit, cat 5e/6 cable swaps, disabled netsh autotuninglevel etc, reinstalling windows server, and updating all hardware etc.

Thing to note:
... Read more

A:Windows Server 2008r2 Datacenter; slow transfers

Arkuatic welcome to the windows 7 forums.

Something leads me to question....

"I had to force install gigabit drivers as intel decided decided to not have the 82579v 2008 r2 driver support.(this is my biggest concern "

It could be the drivers not working properly. Did you try a gigabit ethernet card and disable the on-board one?


Read other 6 answers

I am running Win8.1 on my computer.

It is connected thru an internet router to my Windows Server 2008 R2 Server and my Win XP computer.

Neither of these are showing in the "Network" tab.

Both are Sharing folders.

Is there any way of getting these to share especially the Server?

A:Sharing in non-Windows8.1 Networks - Windows Server 2008R2

Are you saying that both the server and the XP machine aren't showing up under Network on the Windows 8 machine?

If so you will want to make sure that everything is in the same Workgroup, same Workgroup name etc. Not much information to go on here.

Read other 1 answers

In my work from time to time I help manage a server and part of my job is to keep it updated. I was wondering if anyone knows if Microsoft also tries to infect server editions in the same way it does in Win7.

I would guess that GWX doesn't gets installed in the server editions (it would be very inconvenient to see Win10 on a server ), but does Windows Update delivers anything like that?
I'm also concerned about the spyware-ridden updates (aka "telemetry"), does those also affect server versions of Windows?

I would prefer to avoid those like the plague, but I don't want to simply skip updates althogether like I do on 7 since the outbreak of the GWX virus.


Read other answers

Using a Windows 10 Pro workstation at the latest build, I am not able to see a Windows 2008R2 server as a network object.

When I click the yellow folder icon on the task bar to view my folders, and then I click to expand the "Network" section on the left sidebar, I never see the Windows 2008R2 server as one of the objects in my network.

How can I get the Windows 2008R2 server to show up here as an object?

Read other answers

Although according to the official Microsoft blog, the availability of Windows Server 2008 R2 begins this Friday, they had provided them to enterprises with Windows 7 last week actually.

Check this.

These are the snapshots of running Windows Server 2008 R2 DataCenter activated with genuine license key from Microsoft.

A:Microsoft Already Issued Keys for Windows Server 2008R2

good to know. thanks.

Read other 1 answers

Hi ,

RAID and Win 7 Home Premium newbie. Short version of long story - replaced old dead RAID Drives in Win XP system with (2) new 500GB Drives plus plan to upgrade RAM to 8GB (would have liked more but $$$) and install new OS = WIN 7 Home Premium 64 Bit.

MB is GA-EP45-UD3R Rev 1.1 and I am having trouble figuring out how to get, prepare and install the Intel RAID Drivers for 64 Bit Win 7 HP.

My main problem is that on the Gigabyte site they offer two RAID Drives.

Intel SATA Preinstall driver (For AHCI / RAID Mode) Note: Press F6 during Windows setup to read from floppy. OS: Windows XP 64bit,Windows Server 2003 64bit 0.32 MB 2009/08/11

Intel SATA RAID/AHCI Driver OS: Windows XP 32bit, Windows XP 64bit, Windows Vista 32bit,Windows Vista 64bit,Windows 7 32bit,Windows 7 64bit,Windows Server 2003 32bit,Windows Server 2003 64bit 13.10 MB 2009/08/11

The first "pre-install" driver extract to a 64Bit (bootdisk - Win XP 64?) and the second "I do not know when to use it" Driver extracts to a (iata_cd.exe).

This is where I am totally lost. Which RAID Driver and from where do I install during the clean install of Win 7.

I get the need for a USB Stick/Thumb Drive with the RAID Driver on it that Win 7 will ask to be pointed at, but which Driver????

I cannot extract anything from the iata_cd.exe. Tried 7-Zip, Universal Extractor and File Alyser - I do not see a Win... Read more

A:New RAID Array and Clean Install Win7HP-Help with RAID Driver Install

The pre-install driver will allow setup to install the files correcty on the RAID array this is offered for XP only.

When you have created the RAID array in the BIOS Utility and you launch the windows 7 setup does it show the new array as a possible install location? If so there is no need for a pre-install driver (Win7 supports a variety of RAID setup out of the box).

If you do need a pre-install driver, you have not been offered one for Win7/Vista on the Manufacturers website. The only solution to this I have found is to Download "7lite/Nlite" and build the "post install" driver into the win7 image then burn a new disk (or burn to USB pen for faster install).

Hope this helps.

Read other 9 answers

I have recently bought 2 1Tb Western Digital SATA III 6 Gb HDDs.
The idea being, that I would Install Windows 7 Ultimate 64 bit via the onboard Marvell controller in Raid 0.
I have not even got past the Collecting Information part of install, because no matter what Driver I try to load, Windows refuses the drivers because it says they are unsigned.
It tells me to load 32bit and 64bit signed drivers but I've tried every Marvell Raid driver I can find including ones from ASUS site.
Says the same every time and I either need to be told what I'm doing wrong or a driver set that works or a way of getting round the problem.
I have tried loading from Floppy and flash drive.
Might it be possible to install without the Raid drivers and add them after install, probably a stupid question but I'm amazed what some people can do sometimes.
I have the latest BIOS so that I can run with my new Phenom II x 6.
The raid array shows up fine in BIOS and shows as Disk 0 Partition 2 1861.9 GB Primary during install.

A:Marvell Raid 0 Driver Problem on SATA III 6Gb on 64 bit install

There is a way to get around the un-signed drivers... It was in a thread a short while ago.

I will try to find it, but in the mean time, google "using unsigned drivers in windows 7" and you might get a result


Found it. You can disable driver verification enforcement via advanced boot options:

Advanced Boot Options

Read other 9 answers

Hi ,
I am seeking some information like support and Compatibility of below product for platforms Win Server 2008R2 and Win Server 2012R2.
Software Name: Diagnostic Tool for the Microsoft VM
Software Version:  1.2.40329.00
Please provide the support and compatibility results for above mentioned OS platforms , Also you can provide us the details if any other support/contact channels are available.
Thanks in advance. 





Read other answers

I have a print server running 2003 standard sp2, I have been looking for a way to allow helpdesk staff install and manage printers without logging into the server and without adding them to the admin group.

So I added them to the power users group and the print operators group, that worked fine they were able to UNC ( \\servername ) to the server and install printers, drivers, as well as uninstall drivers? printers ect????.
Now the problem??? this works great from an XP box, but when we try it from a windows 7 machine we get access denied. More specifically it acts like it is going to install the printer then when it comes to the driver installation part it fails ?Printer driver was not installed. Access is denied.?

No changes have been made to the permissions I can log into an XP machine with my profile and it works fine log out go to a Windows 7 machine use the same credentials and I get the above message access is denied. I am an admin of both machines on the windows 7 machine I have UAC turned off completely. Running XP Pro SP3 & Windows 7 pro both are 32 bit machines.

I should also add that I have made the necessary group policy changes to allow printer operators to Load/Unload device drivers and under the local policies/security options I ensured that the Prevent users from installing printer drivers was Disabled.

Any help would be much appreciated.


A:Windows 7 & 2003 Server Standard SP2 Unable to remotely install driver on print server

How do you enter the credentials on the Windows 7 machine? I've noticed that you have to use "domain\username" rather than just the username in some cases.

Read other 3 answers

Hey Guys,

Just got a T3600. It came with a clean HDD. I installed RAID HD's and created a bootable USB with which I installed Windows 10 onto the HDD. I've updated all drivers.

I want to get rid of the HDD for a SSD. The T3600 sees all drives. I've got the SSD on Disk 2 and it's formatted, primary, active, etc...

Now the fun....

I remove the HDD and put the SSD in its place. I boot from the USB and follow windows 10 install directions. It's when I tell it to install on the SSD I get the error... 0x80300024.

I've scoured the internet and have tried many tricks, but to no avail.

A little help would be awesome!!!



A:Can't install windows on SSD on T3600

Read other 6 answers

We have a new bare-metal T3600 that only came with a Free-DOS disk ( no DELL drivers CD)  and are trying to install Windows 7-64.
After booting off the W7 DVD we get to the "install drivers" point of the installation and are drivers from the support site onto a USB stick, but nothing is working.
My T3600 configure with 
PERC 310
1 SATA Drive 1TB
nVdia Quadro 600
I tried to install by using Windows 7 64 bits Enterprise ,even Pro version but not working. After that I download PERC driver from Dell web site and use during installation , seems it's not right driver for PERC.
I tried by using external DVD drive , still no working.
I tried by remove PERC 310 , HDD0 SATA cable direct to HDD and set BIOS to ATA not AHCI then using W7 Ent even Pro 64 still not working.
I tried to install into other PC (optiplex) by using this HDD and DVD drive, it's working. mean problem not from HDD and DVD !!

A:cannot install Windows 7 in to New T3600

Sorry Kowitk, the link doesn't seem to appear correctly.
Please follow the instructions below:
1. Goto: ftp.dell.com, choose Browse for Drivers (should be the 1st option)
2. Select Desktops
3. Choose Precision Workstations
4. Select T3600
5. Then choose SAS RAID,
6. On the next screen choose driver
7. Next choose Windows 7 64bit driver
8. On the next screen download the SAS RAID driver
9. Double click the .EXE and follow the wizard to unzip the file to C:\DELL\DRIVERS\XXXXX
10. Once unzipped copy the files from the folder onto a USB Flash Drive.
11. During the Windows 7 Installation, on the 'Where do you want to install Windows' screen, insert the USB Flash Drive and choose 'Load Driver'.
12. Windows will then search for the driver.
13. Once the driver is loaded click Next and the Hard Drive should now be seen and you can continue installing Windows

Read other 13 answers


I have been trying to instal Win 7 Home Premium in G30 running Win XP (Media Edition) without success.
The issue is Toshiba Raid driver is missing.

I have since download and install new driver (V1.10.0016).
Still Win 7 upgrade s/w didn't recongise.

Has everyone successfully upgraded the OS?
Thank you.

Oz Toshi

A:Qosmio G30: Cannot install Windows 7 due to missing RAID driver

> Has everyone successfully upgraded the OS?
Did you read some of the previous threads crated here in the Qosmio G forum?

For example like this one:

You could use the Vista RAID driver in order to install Win 7.
Its works properly as it was mentioned in the other thread.

Read other 3 answers

Service tag: 
<ADMIN NOTE: Service tag removed per privacy policy>
Dell Precision T3600 
I have been trying to install Windows 7 on this machine now for two days :) I have tried numerous drivers off the support website. 
This machine has two 500gb SAS drives configured with a Dell H310 SAS card. 
initially I configured both drives as a raid-1 mirror, initialized both disks and set the boot options in BIOS to ata and legacy.
I then load the Windows 7 setup and has problems finding the drives. Ok I thought get the drivers to the H310 card. No matter what driver I throw at this thing it refuses to detect any hard disk. 
I get a error messaged saying continue to load *signed drivers*
I have tried every driver on the Dell site, and also other suggestions with Intel drivers nothing has worked. 
I get the same problem the windows installer cannot see the drives. I even unraided the configuration and same problem occurs. 
This is a headache!  please is there a simple way to install windows on this heap of junk :)

A:Dell Precision T3600 Windows 7 Install problems

PCI cards in General DO NOT ENUMERATE properly or install without CHIPSET DRIVERS (F6 mass Storage Drivers) Being installed FIRST.
There are 2 fiiles at the link you want the one that is 156K
'"Windows Setup could not configure Windows on this computer’s hardware" installation error on a Windows 7-based or a Windows Server 2008 R2-based computer'.

This is not cookie cutter you must extract the drivers and point to them on a USB storage device unzipped.  EXE OR ZIP is not F6 READABLE.

Go to another computer that has an internet connection and click the link below to download the PERC driver for your hard disk drive (either 32-bit or 64-bit):
Save the downloaded driver to a DVD or USB flash drive or an external hard drive that can be taken to the PC that you're installing Windows to.  Its an exe rename it .zip and extract the 4 files.
Next, start the installation of Windows 7 or Windows Server 2008 R2 and watch for the Load Driver option. You will see this option on the Where do you want to install Windows? screen in the lower right corner.
Connect the USB flash or external drive to the computerthat you're installing Windows or take the Windows DVD out of the drive and put the driver DVD into the drive. (You will put the Windows DVD back into that drive after the driver is loaded)
Click Load Driver,&n... Read more

Read other 2 answers

I try to join win7 pro  to Windows Server 2008  domain and i get the following error:An attempt  to resolve the DNS name the domain has fail. All firewall are disable and all network discovery are on. I can ping the server and client by computer
name. Nslookup domain name return time out error. With windows XP i was able to join to the same domain with the same configuration .The client and server configuration:

A:Windows 7 PC cannot join new windows 2008r2 server yet windows XP can

Thanks for posting in Microsoft TechNet forums.
It seems more related to server configuration.
Please refer to following article:
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name
of this computer to "" failed...."
How to Prevent Domain Controllers from Dynamically Registering DNS Names
As this forum focuses on Windows Vista specific issues, this inquiry would best be posted to Windows 7 forum:
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly
can either share their knowledge or learn from your interaction with us. 
Thank you for your understanding.
Best Regards
Magon Liu
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
 Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 3 answers

Having intermittent BSOD crashes once every couple of months tried hotfixes and everything i can think of pciidex was the original diagnostic but unable to figure it out here are a few mini dumps any input would be highly appreciated!

A:Server 2008r2 BSOD

Hi -

All dumps but 1 list this Microsoft OS driver as the probable cause -


intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD) - Windows PCI IDE Bus Driver Extension


It is likely listed as a default and is not the actual cause.

The most recent dump had bugcheck 0x124 = WHEA = Machine Check Exception.

The WHEA record indicates that CPU may be an issue. Processor 2 reporting L2 cache error -


2: kd> !errrec 856d001c
Common Platform Error Record @ 856d001c
Record Id : 01cdb53b40f701cc
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 10/29/2012 7:39:41
Flags : 0x00000000
Section 2 : x86/x64 MCA
Descriptor @ 856d012c
Section @ 856d02b4
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : GCACHEL2_ERR_ERR (Proc 2 Bank 2)
Status : 0xb22000000103010a
Bugcheck 0x124 is almost always hardware failure related. A few things I noticed in the dump files that ... Read more

Read other 1 answers

I have T3600 with LiteON 256GB SSD, GeForce Quadra, Xeon 1620, 32GB RAM. 
Trying to install clean install of Windows 10, 64-bit, 1607 build from August 2016 ISO.
The install fails everytime on 33% "Preparing files to install" step with error 0x80070570.
We tried different pendrives, an DVD also. Tried to switch disk on SATA and RAID ports. Tried to turn on/off SATA, RAID controllers, turn off audio, USB3, etc...
Tried to remove and swap RAM DIMMS
No luck - second day of failed fight. Is this machine complatible with Windows 10 at all ?? ;-(((

A:T3600 Windows 10 64-bit 1607 build - clean install failed

Your error is bad media.
Windows cannot copy files required for installation. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570
DVD's should be recorded at the slowest speed possible 1X 2X 4X max.
T3600's also require F6 Drivers for windows 7 or 8 or 10
Mass storage drivers are not optional because ATA mode for sata operation does not exist in newer UEFI bios.
Chipset/Controller Driver and Software - Helps Windows control system board components and controllers, such as USB and other internal components. This is located under the Chipset Category or Storage Controller and/or Serial ATA Category aka AHCI aka F6 drivers.
You could extract all files from this cab and then point to them at the install stage.  You cant F6 point to drivers that are in a compressed cab  they must be extracted and at the root.
Windows 10 cab file is below.
Driver Pack Contents Information for: Precision - T3600Windows10 - x86

Creative Labs Sound Blaster Recon3D PCIe Audio Card Driver
Realtek High-Definition Audio Driver
Intel Unified AMT 7 WS Management Interface Driver
A... Read more

Read other 1 answers


I have a newer Windows Server 2008R2 server that has a serious infection. I noticed our internet speed was very slow. I checked the logs on our Sonicwall firewall and the IP address for this server transferred 962GB of data in just over 3 days (usually its in the 100 of MB's). Using the connection monitor in the firewall I can see thousands of connections to random IP addresses mostly in Europe and Asia. Everything was using port 3389 (terminal server).

Around the same time some users reported that a program called "HideDragon" pops up when they login to the server (this is also a terminal serveR). I removed it using msconfig but it keeps coming back. I also noticed a program call DuBrute running which pegs my firewall at 100% usage. I can manually kill the process but it keeps coming back.

So far I've run a complete scan with latest version of Symantec Endpoint and Microsoft Safety scanner. Both come back clean. I've changed all passwords including local admin accounts and user accounts. I blocked all outgoing traffic on port 3389 and this has restored the internet bandwidth so the users are happy, but whatever is happening is still lurking behind the scene.

I can't post a DDR log because it doesn't support Server 2008. I'm leary of running any scanners that aren't designed for a server os, but I will give it a shot.

My research points to a virus\trojan called Morto, but I don't have any of the re... Read more

A:Server 2008R2 - Serious Infection\Hack

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers

? OS - Windows 2008R2 sp1
? x64 ?
? What was the original installed OS on the system?Windows 2008R2 sp1
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?OEM
? Approximate age of system (hardware)6years
? Approximate age of OS installation (if you know)6years
? Have you re-installed the OS?no

? CPU intel xeon e5506
? Video Card matrox g200
? MotherBoard (if NOT a laptop)
? Power Supply - brand & wattage (if NOT a laptop)

? System Manufacturer Dell
? Exact model number (if laptop, check label on bottom) Poweredge t710

Laptop or Desktop?desktop server

network card: Broadcom BCM5709C Nextreme II Gige
Driver date 04/02/2011

Getting BSODs on a very irregular base.
tcpip module crashes but that can have loads of causes

I'm pretty stucked here...any help anyone?

Read other answers

I have 40 Windows 7 machines in a single domain on a Server 2008R2. I have a handful of machines that are refusing to map to some individual folders on the server to which the credentials supplied have full access.  For example:
I have the following folders on my DATAPART1 (D:)
When I log in as an admin on one of these offending machines, I can map \\dc\shared\marketing   
but not    \\dc\shared\profiles.  I have full rights to both folders.  I also cannot map \\dc\shared.  I cannot find anything which prevents the folder mappings.  When I go to another
machine with my credentials, all mappings work fine.  But, when I login to a third machine, \dc\shared\profiles works, but \\dc\shared\marketing does not.
What would prevent a individual machine from mapping to a folder to which the user has full rights?  The machines that are having issues are consistent in the folders they refuse to map to. 

Read other answers

So I finally got the the right drivers, managed to stick them on a floppy disk, get windows xp install to register them and install to the RAID 0 setup (Hardware controlled)

It works fine until the pc is restarted. After I restart if there is nothing in the cd drive or floppy drive I get 'Operating system missing' boot error. The only way I can get it to boot is to have the windows xp install disk in the drive, and the floppy disk in the drive with the raid drivers on.

If i go in to the windows setup disk and try to load the drivers again to properly repair the install it gives me 'Floppy disk wrong format' error (or something like that) and I can't do anything.
I could live with this if it wasn't for the fact even though i can boot it up and get access after a restart, performance is rubbish. The system hangs and freezes randomly ectt..

I have found a win 2000 driver, extracted the files from that.
I have a Proliant ML 310 G1 Server and there is only support for windows 2000 and I need XP on it.

How can I get the RAID drivers to properly install?

Many thanks


Read other answers

This is a followup to http://www.bleepingcomputer.com/forums/topic436736.html as requested by Broni.Windows 2008 R2 server running Remote Desktop ServicesBoth Firefox and Internet Explorer lead users to 95p.com pages. For example, searching for "Hello World" within Google takes me to legit search engine results but when I click on the Wikipedia link, I get a link to http://95p.com/?search=hello%20world&subid=25&key=f10a8a2532c7caa708d7 instead.Tried both TDSSKiller (renamed to iexplorer.exe before being copied to this server - nothing found) and MalwareBytes (one Trojen.Agent found in Temporary Internet Files) but the problem remains.Proxy server settings in both browsers appear correct (blank) as do DNS and router settings.The browser hijacking appears to affect all users. GMER - http://www.gmer.netRootkit scan 2012-01-08 11:55:01Windows 6.0.6002 Service Pack 2 Harddisk0\DR0 -> \Device\00000055 VMware__ rev.1.0_Running: m113pviu.exe; Driver: C:\Users\admin\AppData\Local\Temp\pxldipow.sys---- Kernel code sections - GMER 1.0.15 ----? System32\drivers\bnqlumn.sys The system cannot find the path specified. !.text dfsc.sys 92759302 501 Bytes [00, 00, 00, 00, 00, 00, 00, ...].text dfsc.sys 927594FD 340 Bytes [00, 00, 00, 00, 00, 00, 00, ...].text dfsc.sys 92759652 1027 Bytes [00, 00, 00, 00, 00, 00, 00, ...].text dfsc.sys 92759A60 181 Bytes [00, 00, 00, 00, 00, 00, 00, ...].text dfsc.sys 9... Read more

A:Web searches hijacked - 2008R2 Remote Desktop Server

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/437042 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

Read other 26 answers

Windows 2008 R2 server running Remote Desktop Services

Both Firefox and Internet Explorer lead users to 95p.com pages. For example, searching for "Hello World" within Google takes me to legit search engine results but when I click on the Wikipedia link, I get a link to http://95p.com/?search=hello%20world&subid=25&key=f10a8a2532c7caa708d7 instead.

Tried both TDSSKiller (renamed to iexplorer.exe before being copied to this server - nothing found) and MalwareBytes (one Trojen.Agent found in Temporary Internet Files) but the problem remains.

Proxy server settings in both browsers appear correct (blank) as do DNS and router settings.

The browser hijacking appears to affect all users.

A:Web searches hijacked - 2008R2 Remote Desktop Server

Welcome aboard Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.====================================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware,... Read more

Read other 11 answers

Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 06-05-2015 01
Ran by adax (administrator) on KLONDIKE on 06-05-2015 16:15:26
Running from C:\Users\adax\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\43W2SORD
Loaded Profiles: nurse1 & nurse2 & SleepingAccuroAdmin & test1 & laptop5 & doctor1 & doctor5 & doctor10 & doctor11 & doctor17 & doctor32 & physio2 & adax & Administrator (Available profiles: Reception & reception3 & nurse1 & nurse2 & nurse3 & exam1 & exam4 & exam7 & exam9 & exam10 & SleepingAccuroAdmin & exam11 & exam17 & laptop1 & laptop2 & cdsadmin & test1 & laptop3 & laptop4 & laptop5 & laptop6 & doctor1 & doctor2 & doctor3 & doctor4 & doctor5 & doctor6 & doctor7 & doctor8 & physio & doctor9 & doctor10 & doctor11 & dr.burns & doctor13 & doctor14 & doctor15 & doctor16 & doctor17 & doctor18 & doctor19 & doctor20 & doctor21 & laptop7 & doctor23 & doctor24 & doctor25 & doctor26 & doctor27 & access & doctor28 & doctor29 & ipad & doctor30 & doctor31 & doctor32 & doctor35 & carling & sara & physio2 & physio3 & doctor36 & doctor37 & doctor38 & doctor39 & physio4 & doctor40 & doctor33 & adax & Administrator & Cl... Read more

A:support to remove from server 2008R2 mng_minerd virus.

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/575407 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 4 answers

Hello, I am trying to install printers and drivers in a new dell poweredge 2950 server running server2003 r2 and I've tried a couple times, but I'm sure I,m missing something. I am trying to install them and share them on a network. Thanks for the help.

Read other answers

I install win 7 like I normally do. This system I installed windows 7 pro with a RAID 1 Everything installed great. I install all the updates and other programs with no problems I shut it down two days ago and went to start it yesterday, and the windows logo shows and then to an arrow and there it stops. I can move the arrow. Just a black screen. If I try and do a restore I load the RAID drivers and it can't find a windows set to do so. I know there are restore points it just doesn't show any. What's up with just the arrrow? Any help would be greatly appriciated. I don't want to reinstall everything again. There has to be something I'm missing or something I can do.

I think the the unit has started. I just can't get to or see the desktop. Does that make any sence to anyone. The drive activity is on solid it just won't boot to the destop it seems.

A:New Windows 7 Pro Install With Raid 1 Problem

See if these links can provide help...

Why is my screen black when I start Windows 7?

Windows 7 Black Screens of Death for Some AMD/ATI GPUs - Softpedia

windows 7 black screen after login, no desktop show up

Windows 7 Loads to a black screen. Whats the - Microsoft Answers

Read other 1 answers

After this last patch Tuesday my USB ports have stopped working when I get to the login screen.  The ports themselves work fine in bios mode.  Any ideas on how I can access the o/s to rollback the driver?  Keep mind my mouse and keyboard are usb and I have no ps/2 ports on the T410.  Nor, can I get in via RDC.

Thanks, Dave

Read other answers

OK, I'm probably being stupid (Monday moment) and I did look elsewhere in the forums for the answer but...

I have a new server:
Tyan Tiger 200 T Motherboard
Promise Ultra ATA100 SX6000 6cH RAID PCI
4 * 60GB ATA100 IBM 7200RMP Hard Drives

I have configured the RAID array to 4 HD RAID 0+1 so I should have a 120GB "hard drive"

I am trying to install Windows NT Server 4.0 from either CD or floppy (have tried both with same results). I get to a certain point (after loading the driver for the Promise Ultra ATA100 SX6000 RAID card using the "S" option) and the install says "Setup did not find any hard disk drives installed on your computer" and requires that I reboot and try again.

I'm probably missing something REALLY simple, please help me out...

The NT never asks me about formatting the hard drive. DOS's fdisk will recognize the hard drive but formatting a boot partition with fdisk didn't help.

Read other answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 2
RAM: 1022 Mb
Graphics Card:
Hard Drives: C: Total - 250003 MB, Free - 225853 MB; D: Total - 226925 MB, Free - 226852 MB;
Motherboard: Dell Inc. , 0U7077, , ..CN481114B601BJ.
Antivirus: Norton Internet Security, Updated: Yes, On-Demand Scanner: Enabled
Originally every 2 - 3 mos., now every 2 - 3 wks. during windows startup I get a blue screen "A problem has been detected and windows has been shut down to prevent damage to your computer"

I disconnect power, wait a couple of minutes and restart. It restarts normally, then I get "The system has recovered from a serious error - please tell Microsoft". I send error report.

Windows error reporting responds "Download and install driver for RAID controller from Intel website".

I follow the link and download iata_env.exe but when I try to run it I get "This computer does not meet the minimum requirements for installing the software". This doesn't surprise me since I do not have a RAID controller on this system.

My question is - how do I stop Windows from looking for RAID drivers to load at startup? There is no RAID controller listed in Device Manager so I can't disable it there.

This started some months after I upgraded some Intel drivers (about 2 yrs ago) but... Read more

A:BSOD when windows tries to load RAID driver on system with no RAID<input type=

Read other 6 answers

Asus A8R-MVP & Raid 0 on WD Raptor Windows Install Problem - NOW SOLVED

Hi, New here ....

Got new mobo and stuff yesterday. Long story short - created RAID 0 with 2 x WD 74 Gig drives. Managed to create the SATA ULI drivers disk, tried to install WinXP, press F6 to allow this driver.

Windows picks up the driver, loads it, then says no hard drive found. I tried this with RAID without RAID with a single other SATA, nothing.

Currently the PC is running as I installed onto a 6GIG IDE (dont ask) - then used the WD tools and 'ghosted' onto a 40 Gig partition of the RAID array.

I suspect I need to create a WinXP slipstream CD, yet the driver seemed to load OK, why no drives found?

Thanks in advance.

A:Asus A8R-MVP & Raid 0 on WD Raptor Windows Install Problem

You used wrong drivers perhaps? Or put together the floppy wrong.

Read other 4 answers

I just built a new computer
AMD FX 3.1 8core
Asus Sabertooth 990fx
16gb Corsair DDR31600
2 WD Caviar Black 1tb
2 OCZ Vertex 2 60gb - Raid 0
Thermaltake 1200w modular PSU
Antek 300 Black

I put all this together and plugged my 2 SSDs into SATA 1 and 2 and left the 2 tb drives unconnected for the moment. I loaded up windows 7 ultimate X64 on a flashdrive and went into the bios. Set drives to RAID and driver to legacy, (I dont really understand how to set up the other UEFI raid controller). On boot I pressed ctrl-f and set up raid 0, 64 bit stream and fast. Set my 2 drives to yes and named it SSD120 then cleaned the MBR with ctrl-y, and let it use the max size.
I booted into windows 7 install and set up the drivers, selected my 120gb drive and away it went. 5 minutes later everything was copied over and 6 minutes after that I was booting into Windows 7.
I decided too late I wanted to run server 2008 and use hyper V to set up a few other machines and a domain in my home. So not really caring I just nuked my computer right away. I swapped the windows 7 flash drive for my server 2008 flash drive. Formatted the SSDs and recreated the raid. Again it states they are functional and the bios recognizes them. When I boot into the server 2008 install and load the windows 7 raid drivers I cannot see any drives whatsoever. Even if I go back to the windows 7 install. Do I need to pull the drives out and reformat them with a sata-usb cord or what? I am at the end of where I can t... Read more

A:Raid 0 2x ssd Sabertooth 990fx Server 2008 install (no drives found)

Make sure the raid drivers are on the USB drives, most of the time even in the new operating systems, RAID still requires driver disks to be able to install on them.

Read other 2 answers

Hi there. I am pulling my hair out and hope someone can help me. I have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration.

After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. " NO SIGNED DRIVER FOUND, PLEASE INSERT CD/DVD/ FLOPPY, bla bla bla ", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.

After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed
"during" the Windows installation.

Now...WHAT DRIVER??? WHERE??? WHO??? WHAT?? HOW?? Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??

Sorry, I am so aggravated. Please help.


A:New Win 7 Install after RAID SETUP- What Driver??

ASUS Motherboard M4A87TD EVO. look under Utilities.
ASUSTeK Computer Inc. - Motherboards - M4A87TD EVO
RAID - Wikipedia, the free encyclopedia
Good luck with your Raid.

Read other 3 answers

I checked T3600 and 3610 - the only difference is BIOS firmware, even BIOS chips are the same. T3600 has Intel ME firmware 7th version - that is why Xeon v2 are not recognized by the 3600 system, they need later 8th version of ME. Upgrade of ME formware is a difficult procedure  - You need to fit the size and other attributes of old ME region. The simpliest way would be to read both BIOS chips from 3610 motherboard and clean data region in ME but I don't have any T3610 systems. Another way is to analyze BIOS file for T3610 and drag out the firmware for T3600. If anybody has T3610 - please reply

Read other answers

I have an HP P6530F desktop with Windows 7 Home Premium 64 bit SP1. The HP Support program that periodically scans my computer is offering an optional update for Intel RAID Driver and Configuration Software. I have attached a screenshot of the specifics.

My computer seems to be running fine. Is this update something I should bother with?

A:Intel RAID Driver and Configuration Software Update - Should I Install

If you're not running a RAID setup then no, leave it well alone.

Read other 1 answers

it was a normal day at my Internship and i was trying to install Windows 2000 advanced server on an hp NetServer lp1000r and accuired the needed drivers for the scsi adapter from here when i got the drivers on a floppy disk i started the windows 2000 advanced server setup cd en pressed f6 to load the additional driver but when i selected the driver i got this error:  Spoiler (Highlight to read)File \win2000\ultra160\adpu160m.sys caused an unexpected error (18) at line 1215 in D:\nt\private\ntos\boot\setup\oemdisk.c.press any key to continueFile \win2000\ultra160\adpu160m.sys caused an unexpected error (18) at line 1215 in D:\nt\private\ntos\boot\setup\oemdisk.c.press any key to continue  I have no idea why this error pops up. My guess is that it could be windows 2000 install disk or totally something else and yes i am aware that this server is no longer supported by hp support, but the worst part is that the person who gave the server to me didn't gave the factory floppy with it.  This really needs to be resolved if possible, because this server is going to be reused. I was however trying to mail this to HP support but the webpage got shutdown or something like that where i could have gotten the mail. the broken link is here Sorry if my english is a little weird. I'm actually Dutch. (Nederlands)  

Read other answers

Heya. I've had a couple different posts on here because of some pretty mad malware. Basically, my comp won't load to the login screen, so another member and I determined it was best to do a fresh install.

Now, I have a recovery console on my hard drive (forgot what program made it) and I have the recovery CD. The hard drive recovery will accept my raid drivers and send me through, however, when I try to get to recovery from my DVD it gives me the old fatal error oooooo7xb or what not. Of course I need to utilize the DVD version to install windows, and believe it or not I'm using the same floppy I used when it work. I did mess with my BIOS settings to get something else to work, so now I'm stuck.

Can i do a clean install from windows(safe mode works, regular mode won't) or is it absolutely best to do it from Dos recovery?

Read other answers

Server is 2008R2. It is a primary domain server.

I have not yet joined all client hosts to the domain. Can not do that for awhile yet. Some hosts are joined but most are not.

I have directories on the server that are shared with "everyone" as read/write. One, for backups, I really need all clients to see easily.

When I go to Network Neighborhood on the XP box all the shares on the server show up.

On Vista and 7... the server itself does not even show up.

What is going on here?

Read other answers

I too am having this exact same problem. Unfortunately, your entry is the only one that seems to describe my situation exactly and there hasn't been any reply.

Did you ever manage to get this issue fixed? If not, what kind of system are you running? I too have Vista Business Edition and think the problem might be with my hardware...That's just a thought though. By comparing hardware, we might be able to find some common link besides Vista. I believe it my be my motherboard. I have an Elitegroup 755-A2. The rest of my specs should be in my post here....I just registered so I'm not exactly sure if they will show up.

I look forward to your reply.

A:Raid driver problem

Read other 7 answers

I've built a new system with the following components:
ASUS A8V Deluxe - Motherboard (onboard RAID controller)
AMD 64 FX 53 - Processor
Koolance PC2-650B - Case/Liquid processor cooling
Kingston KHX3200 (2x512) - RAM (on motherboards compatibility list)
BFG GeForce 6800 GT OC - Video card
WD Raptor 74 (x2) - SATA Hard Drives

I set up the RAID with it's controller (ctrl+f) and have deleted and recreated it once to see if that fixed my problem. The Windows XP cd I have is legal and it boots. I try to install a third party driver for the RAID and the installation works but when the Windows install gets to the step just after the mass driver installation it says it cannot find any mass storage devices to install Windows on to. I've checked the motherboard manual multiple times to make sure I have everything plugged into the right SATA ports and the array lists itself as functional in the bios. What am I missing?

A:RAID Driver Problem?

Read other 16 answers

I posted my problem under networking but this looks like a better place to get answers. please check out my other thread and let me know what you think.

A:Windows 2000 server with RAID 3 ERRORS...

Multiple posts are never a good idea.

Read other 1 answers

Hi there, i'm running windows server 2003 on one of my PC's at home and think i screwed up lol.

i have a K8N4-E Deluxe Mobo and it has 4 Sata Ports on the chipset and 4 Sata ports thorugh a SI Raid. So i now have 5 HD's and the 4 on the chipset all get reconized properly but when i try to plug #5 into the raid sata port 1 its not reconized by the system. i'm pretty sure its because i didnt install the raid drivers when i was installing windows, so my question is there a way to install the raid drivers onto the system now that windows has been fully loaded. i dont really wanna format and reinstall everything since installing everything that has to be installed takes FOREVER. i've looked on the Asus website and SI's website and dont seem to see a way.

Any information would help.


A:Windows Server 2003 Raid Drivers

if you have the raid drivers it shouldn't be an issue to install them as long as they are digitally signed by M$ then should work great. If they aren't digitally signed then it will probably work, but there is no guarantee.

Read other 2 answers

I have an Acer TimelineX 3830TG Ultrabook. It doesn't have a DVD drive. It has 2 USB 2.0 slots and 1 USB 3.0 slot, which is a Renesas powered port that can be used to charge a phone for instance when the computer is turned off.

I am trying in install my copy of Windows8 Pro 64bit via a USB flash drive I have tried many different applications and more than once for each. I keep getting an error that there is a driver that I need for my computer that isn't on the installation media and that it is likely for a USB, DVD, HDD device. I have tried using the Windows 7 inf files form my windows7 install and every driver that is available for both Windows 8 and 7. Which was a painstaking process to no avail. I just went out and bought a USB DVD drive and although I haven't tried it yet

I am pretty sure that i am going to run into the same problem as it will also be connected to a USB port. What I really have a hard time wrapping my head around is the fact that if the driver was such a problem how would I be able to boot from it in the first place??? And further more Windows 7 has no problem installing from USB. I have succesfully installed Windows 8 onto a VM and it had the same problem until I diabled the USB. So I am 90% sure that it is the USB that is causing the grief. Short of installing over a network which I have never successfully accomplished before and I don't have access to another computer to even try to do this anyway, so that is a non-starter.

So ... Read more

Read other answers


OS: Windows Server 2008 R2 SP1
Storage: 1x SSD
Board: Supermicro X9SRW-f

Currently the SATA option in the BIOS is set to AHCI. Windows boots to the desktop without issue.

Objective: Convert AHCI to Raid mode. Use the onboard chipset to create a mirrored array with 2x SSDs.

I've downloaded the driver disc for this board and installed the Intel Rapid Storage driver/software. I reboot and change the SATA mode to Raid. Windows starts to load and immediately blue screens. Changing the SATA mode back to AHCI allows me to boot successfully.

There are a few other drivers from the disc. Installing these drivers causes Windows to no longer boot to AHCI or Raid mode.
iaStorA.inf : Installs RSTe AHCI Raid Controller Miniport + RTS Filter Driver
iaStorB.inf : Installs RSTe AHCI Raid Controller Miniport + RTS Filter Driver

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci (Start set to 0)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (Start set to 0)

How can I turn on the raid option and get Windows to boot without error? Registry hack? Other drivers?

*Note the O.S. has been cloned to the SSD. I do not have the option to fresh install Windows.

A:Windows Server 2008 R2 SP1 Change from AHCI to Raid

Raid requires 2 drives do you have the second matching drive installed?

Which Raid config are you trying to use Raid 0(striping) or Raid 1(Mirroring)?

Read other 7 answers