Over 1 million tech questions and answers.

DV6T-7000 Failed Touchpad Firmware update; Now touchpad is d...

Q: DV6T-7000 Failed Touchpad Firmware update; Now touchpad is d...

Hello, I tried to upgrade to windows 8 and found that the touchpad became super sensitive and jumpy. Reading online I found a firmware that claimed to fix the issue and found it on HPs Support site. Mid install, it reported that it failed and forced a reboot on the laptop. When it was back up and running I found that the touchpad no longer worked. Its exactly the same issue as in these links: http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Touchpad-Not-Working-After-Faile... http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Touchpad-Firmware-Failed/td-p/23... I've tried to reflash and to get new drivers but they are not able to go through. The drivers install but don't fix anything. The flashing will quit saying I need drivers first even though I have them. I've even reformated and put the factory windows 7 image back on but it still will not work. The solutions posted in the above links didnt work for me. Does anyone have any idea on how I can fix this?

Read other answers
Preferred Solution: DV6T-7000 Failed Touchpad Firmware update; Now touchpad is d...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


Hello Everyone!So here's the situation. I updated my m6-1045dx to Windows 8 Fresh Install. Among those that I applied was sp58572.exe found here which I will refer to as "patch". However, for some reason, the updater quit and now, my touchpad DOES NOT WORK. I think it's a firmware issue in the sense that I've already reinstalled Windows 8 TWICE and yet it still does not work. I think what needs to be done is to update the driver correctly and then use the patch to correct the firmware. The problem is that I tried restarting, shutting down multiple times, reinstalling the driver (both the one provided by HP for my model and the one on the synaptics website) to no avail.Everytime, I try to run the patch, I only get the error message "A synaptics pointing device driver is required for reflasing. Please install a synaptics driver version or newer".The problem is that it doesn't work EVEN if I install a newer device driver. Any help you can give will be much appreciated. Thank you.

A:Touchpad Not Working After Failed Firmware Update

Hi kaswistry, Welcome to the HPCommunity, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that you are having some issues with your TouchPad. Go to your Device Manager and under ?Mice and other pointing devices? you should see Synaptics PS/2 Port TouchPad. If it is listed there right click and select uninstall then restart your computer and try to install sp58572.exe again. If there is an yellow ! then right click and select Update Driver Software. If anything else is listed there let me know what it is. Thank you,

Read other 3 answers

Hello help me please. My HP FOLIO 9470M NOTEBOOK PC toucpad firmware failed during flashing

Read other answers

I have a HP Pavilion dv6t-7000 CTO. Today I decided to upgrade to windows 8.I downloaded HP's touch pad Firmware update and after running it, it says there's a problem while reflashing the firmware. And now, as you can guess, my touchpad is no longer working. I have the Synaptics device driver installed. When I try to run the Firmware update again I get the Synaptics Reflash Error:"A Synaptics Pointing device driver is required for reflashing. Please install a Synaptics driver version v15.1.6.0 or newer"The touchpad doesn't show up in Device Manager, however, there's a Unknown Device and a PCI device listed in the Other devices section.I've tried to reinstall the driver and all but nothing worked thus far.Help anyone? Thanks in advance! Any suggestion appreciated.


View Solution.

A:Touchpad Firmware Failed

I actually solved this problem just several minuntes after this post. All I did was go to windows' mouse pointer settings and a pop up box appear offering me to uninstall the Synaptics driver. I have no idea how this differ from manually uninstalling the driver but click yes at this check box actually solved the problem while the manual methods didn't.

Read other 10 answers

I have a HP Folio 9470m Notebook pc (refurbished) . I downloaded HP's touch pad Firmware update and after running it, it says there's a problem while reflashing the firmware & stoped flashing at 91% & restarted my laptop automatically (say: less than 1 minutes)  And now, as you can guess, my touchpad is no longer working. When I try to run the Firmware update again I get the Synaptics Reflash Error. how can i flash 100% 

Read other answers

Hello, I had no problems with the touchpad in my first two months of owning this computer. Recently when I try to use the touchpad, the cursor bounces all over the place and I have no control over it. This is espescially annoying when I am at work and need this to work correctly when I am gathering data in an excel doc. I noticed there was a 1.17 firmware update for the synaptics driver in the care center, but when I click to install it will run for a second and then say "failed". Just updated BIOS and every other driver I could think of but it makes no difference.

A:Touchpad firmware update VN7-592G

Hi ! Have you trying Unistalling the driver for the Touchpad? Must of the times unistalling the drivers and restarting your unit will actually fix the issue. If you access the Device Manager (Press Windows key +X)> Select Device Manager > Mice and other pointer device, Right Click> Unistall> Restart. Some updated on Windows sometimes will disable the proper Drivers for your unit. Hope this could help you!  

Read other 2 answers

Hi, I have installed Lenovo System Update software, which proposed to update the firmware of my Synaptics Touchpad (!not driver). The firmware update however ended up with error (see picture) and now my touchpad is not working (not even recognized as hardware in device manager). What i have tried so far:- install whatever Synaptics driver was needed- run Synreflash.exe tool in the driver folder (this ended up with message stating that I don't have any driver installed)- powering off the notebook and removing battery for 30 seconds- running the firmware update tool once again (ending up with the same message as is on the picture) My notebook model is Lenovo Thinkpad L540.  I am really desperate, since I cannot use my notebook without external mouse now

Read other answers

I did a touchpad update  and now the buttons switch around. when one works the other will pop up with a tiny menu ive never seen before. If both buttons work the touchpad wont work. I have put them to default and it works for a bit then will switch again. Didn't have this problem till that stupid update. I have a dell 15-3552 laptop and its less than 2 months old.

Read other answers

Hello all,
I recently purchased a new Inspiron 15 7000 (7537) with Windows 8.  I'm getting used to Windows 8, but really struggling with the integrated touchpad.  It's getting so frustrating I'm considering returning it.  The problems are hard to pin down, but in general:
-I often get the right click shortcut menu, when I'm just trying to click.  I've even changed both the right and left hand buttons to both be "click" (and neither be shortcut menu), but I still get the shortcut menu a lot.
-Sometimes the cursor gets stuck and doesn't respond to movements.  I've tried adjusting the touch sensitivity and disabled palm detection.  No change.
Any advice?

A:Inspiron 15 7000 (7537) touchpad frustrating!

Hi Bill,
Don't have the laptop myself yet but others have suggested uninstalling the Dell touchpad drivers and installing the ones directly from Symantec's site.
I'll link you to this owners thread, might get more help there 

Read other 26 answers

I have W10 on a new Inspiron 15 7000 Series 7559. When I have a mouse or trackball connected, I would like to turn off the touchpad. Otherwise stray fingers from typing move the mouse around.
I went to the control panel and found an option that says "Leave Touchpad On When Mouse is Connected". If I turn that off, then the touch pad is disabled. But I'm using a wireless trackball. When I turn the trackball off, the touchpad doesn't start working. I have to remove the trackball's USB dongle before the touchpad starts working. Ideally, the touchpad would work whenever the trackball isn't working. But it's not that convenient.
On my old Dell laptop, there was a hotkey for enabling the trackpad. That would be ideal. I'd like to enable it quickly depending on whether I'm using the trackball or not. I can't find any hotkey on this laptop. And I can't even find a quick way to get to the control panel setting.
Any way to make this more functional? Possible solutions would be (in order of preference):1) Have the control panel setting work whenever the trackball is turned off or missing, even if the trackball dongle is still in the USB port.
2) Have a hot-key that could enable and disable the touchpad.
3) Create a shortcut directly to the relevant control panel page.
Thanks for any help,

Read other answers

Hello -  for my x220 Synaptics touchpad I did an firmware update to 8.1 but now I want to downgrade because of some issues with Linux and OSX. Can anybody provide a source of firmware V8.0 for this touchpad (Synaptics ClickPad)? Thank youDavid

Read other answers

I have recently installed Windows 7 on my Inspiron 15 7000 - 7559. I managed to found most of the drivers and get the hardware working.
However for the Touchpad, I cannot find driver or software for it. Windows 7 just uses the default drivers PS/2 Compatible Mouse. When in the Dell drivers site, it does not have drivers for input devices.
It works fine as a regular touchpad but it does not have the additional function such as two finger scrolling etc. 
This is still fine to me until I realized that my palm will accidentally hit the touchpad when typing. Looking  at my older dell laptops, I saw that there is a palm rejection feature for the Dell touchpad.
Windows detect this trackpad as Atmel Maxtouch.
Can anyone please advise me were to find a compatible driver to solve this issue?
You help and assistance is greatly appreciated.

A:Inspiron 15 7000 Series 7559 - Touchpad Windows 7

I run the laptop Dell 7559 Inspiron i7. I had the same problem but I have found the drivers that worked for me.Here is a link which has the drivers i was able to get my gestures back downloads.dell.com/.../7559_Input_Driver_GJ4DY_WN32_15.3.1.1_A00.EXE

Read other 20 answers

dell inspiron 17 7000 keyboard and touchpad not working. 

Read other answers

Hey guys,
Ive recently purchased a Dell Inspiron 15 7559 laptop and installed windows 7 x64.I've installed all the drivers from the Dell website that matched my model, however i still have issues with the touchpad. I'm able to right/left click but not scroll. I tried downloading the alps and synaptics drivers for touchpad and restarted the pc without any help.
Anyone experienced issues like this and found a solution?


Read other answers

My touchpad cuts out occasionally for no apparent reason. The scrolling, zooming and other features will no longer work. I can move the cursor around but it will lag. I have to restart or sleep/wake up the laptop to restore the touchpad functions.
Can anyone help with this issue?

Read other answers

Hi guys, I was trying to mess around with the touchpad driver on my new bought xps 13.
I tried with the latest driver on Synaptics website, but it didn't help much.
Then I found a driver on dell website that turned out to be a firmware update. Its for the 2015 version xps 13 so its outdated. I tried it anyways, and then the touchpad stopped working.
Right now the device manager cannot even detect my touchpad, and the firmware version shows from firmware update software changed from 2xxxxx to unknown.
It would be much appreciated if someone can give me the latest/compatible touchpad firmware for dell xps 13 9360. The executive file called SynReflash.exe, and it comes with mup file and package file.

A:Wanted:XPS 13 9360 Synaptics Touchpad Firmware

I have the same problem. the touchpad is still visable in the device manager but under the tab " View -> show hidden devices" I contacted dell support trough e-mail but only got the question how it happened.
I hope to get the firmware to and hope they fix the problem so not more people make the same mistake.

Read other 7 answers

Has anyone used an Inspiron 13 7000 touchpad two-finger scroll gesture and also compared it to a Surface Pro 3?
I've been using the Inspiron 13 for months but just reformatted Windows on a Surface Pro 3 last night and wow - the 2-finger scroll responsiveness is virtually instant on that device.  On the Inspiron it always seems to take a bit of time to get going. 

Read other answers

I was playing a video game on my laptop around 4:30, when the keyboard suddenly stopped working. The mouse still functioned, so I tried clicking around to see if it was just a problem with the game. Then at 4:32, the mouse stopped working, too. I decided to try turning it off, but neither holding nor pressing the power button worked, so I unplugged the laptop from the charger and left it to run out of power on it's own. At 4:35, the display froze. I know this, because up until then the clock was still working. Currently, the vent fan is still running, and the screen is frozen. No keyboard buttons work, and neither the built-in trackpad nor an HDMI mouse is working.  Is there anything I can do to fix this, or do I need to send it in?The laptop was a brand new Dell Inspiron 15 7000 Series, with Nvidia GeForce GTX and an Intel Core i7.

Read other answers

I have purchase multiple xps 13 and inspiron 13 laptops and observe the same issues.  I tend to use the touch pad with my right hand's index finger, and click the touchpad button with my left hand's index finger.  It's a quick way to get things done.  Many in my organization do this, too and have been running into problems.
However, quite frequently (but not all the time) when I click the button with my left hand the cursor jumps to another location on the screen.  Frequently this is the lower-left corner of the screen, but sometimes it is the upper right, too. This causes different windows to come into focus, or it activates the start menu.  Really , really annoying, and it happens on both laptop models.  Our previous Lenovo Yoga 2 Pro and Acer laptops did not have this issue. 
I think this has to do with the touch pad thinking that the user has two fingers on the touch pad and moves the cursor thinking the finger jumped around the pad.  Otherwise the gestures and movement of the touchpad is fine. 
Is this a known issue to Dell?  It's really aggravating and other users in my organization are complaining as well.  I may need to return the lot (3 XPS 13, 5 Inspiron 13 machines ) and look at different hardware.  

Read other answers
A:notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

Hi,  Today I bought this model and have the same problem. If anyone know the solution, please share it here. thx arghhhh!!!!  there, in a top right  corner of the laptop, is a sensor button. Just press it and touchpad becomes alive (it dosn't look like a button at all) ADMIN EDIT - There is now an official tip which explains the N500 trackpoint function and the button to enable / disable it.Message Edited by Mark_Lenovo on 03-04-2009 01:28 PM

Read other 5 answers


I have a Dell Latitude D630 laptop that has issues. Sometimes the touchpad works, and sometimes it doesn't. I've noticed when it doesn't work, the icon in the tray has disappeared or never booted up to begin with. Sometimes it boots up and sometimes it just doesn't even boot up to the tray at all. And at other times, it does.
(Along with this, maybe it's just a coincidence, but I've been working on this for days and days but when the touchpad doesn't work, the keyboard acts up too!) This might have nothing to do with it at all.

I've done a complete reformat of the hard drive, installed Win XP Professional, reinstalled drivers over and over. Been to the Dell website and have all the newest drivers.
When I reinstall the touchpad drivers, it does work once again, but this seems to be short lived.
The laptop is 4 years old...seems strong otherwise, can handle multiple tasks fairly well, has a dual core installed.
I can't figure it out.
Can anyone help?

Thank you!!

A:Solved: Dell Latitude D630 touchpad icon in tray disappears, so does touchpad!

Read other 16 answers

We just got a Dell XPS-15z, and, we have questions about scrolling on the Cypress touchpad using the Cypress drivers.

When scrolling down (either one finger or 2 fingers), when you hit the bottom of the touchpad, is there any way for the scrolling to continue without your having to lift your finger(s) back to the top of the touchpad? On other Dell laptops, I have Chiral motion, or the scrolling continues so long as your finger is at the bottom of the touchpad? I tried enabling the "Continued Motion" option just in case that was what did it, but that did not seem to work.

Which brings up another question re what "Continued Motion" does.

Also, is there any manual/help document for this driver either on the internet, or in the software itself?

I looked on the forum and on the internet, and couldn't find any answers.


Read other answers

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP: ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

Read other answers

Hello Everyone,

My problem started after updating windows 8.1 to windows 10, of course!
First the touchpad just stopped working, for no reason.

My solution was to uninstall the drive and restart the laptop. And from time to time I had to do this proceed. Two weeks ago windows updated, and the touchpad issue's gone. . Unfortunately, another one appeared.

The feature "mousekey", which is turn it on at ease access to use the numeric keys to use them as a mouse, It's turning itself on. And doesn't matter how many times I turn it off, few seconds and it's on again.

I've tried uninstalling the drive, which after windows the last updating was "ELAN".

Then I replaced by the Toshiba drivers, which is "Synaptic", and uninstalled the drives ,the problem is the same. Because of that, I can't use my numeric key, which is annoying!! If anyone can come up with something I will be grateful.

Read other answers

Until recently the touchpad used to work with the HP / Synaptic driver. 2 or 3 finger function worked and turn on / off with the orange light worked.  For whatever reason these functions don't work anymore and I don't find a driver on the HP Support site to download and install.

Read other answers

Hi, this is very confused for me. Because the touchpad works, but I couldn't switch off it by the "yellow light". It means the yellow light can not be turn on. How to fix this problem?

Read other answers

TouchPad movement very slow  some times not working but when i hard reset Touchpad working good. Its working with external mouse very well. Each and every time i should hard reset then touchpad works fine. I am looking for permanent solution.

Read other answers


#1 For some reason my touchpad on my HP 15 (2015 model with 8.1, now upgraded to Windows 10 1511) freezes. I hate that when it happens, you cant use it for 20 or 30 seconds or so. I close my lid and open it back up and it works normal, but then after a little bit it starts doing it again. My driver is up to date, I think it maybe Synaptics? If I need to give more info, please say!

#2: When I scroll on my touchpad up words it opens the start menu every so often when I am scrolling a lot, but when I didn't even open or even get near it or press Windows key. What is causing this? I hate it when it does this and screws up my readings then it stops scrolling and focuses more on the start menu then I have to click out of the menu and go back to what ever I was doing.


Read other answers

My hard drive that came with my device recently crashed. I bought a replacement hard drive and had to buy the Recovery Manager from HP. I received it earlier today, and for 6 hours I have been staring at the "Factory image recovery preparations" page with the first tworld items checked and the third unchecked. Progress has remained at 0 % this entire time. It says it can take hours and not look like it is actually progressing at times, but this seems incorrect. I am sure the hard drive I bought as a replacement works with my laptop.

A:DV6t-7000 HP Recovery Manager

Hi: Something doesn't seem right. It shouldn't take more than 3 hours from soup to nuts to do a recovery. While I can't help you with why the HP recovery media isn't working, if you can read all 25 characters of the W7 product key on the Microsoft sticker on your notebook's case, you can make your own plain W7 installation media and use that to reinstall Windows 7. This site claims to have genuine, unadulterated W7 ISO files for download... https://www.heidoc.net/joomla/technology-science/microsoft/67-microsoft-windows-iso-download-tool Click on the link labeled Windows ISO Downloader.exe You can use either the:  Win 7 Home SP1 or the (Retail version, but the OEM key on your PC's case should work with it)  Win 7 Home SP1 COEM (This version would be for what HP would have used--System Builder) N is for European Union (EU) countries. K is for South Korean markets. Then you can use this tool to transfer the file to a 4 GB USB flash drive or a DVD. https://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

Read other 1 answers

Hello, As the subject line mentions that I have HP Pavilion dv6t 7000 CTO quad core entertainment PC. I read in the maintenance guide that HMDI 1.4, which laptop has, supports 4k resolution. But for some reason when I connect my 4k TV to the laptop, the maximum I am getting is 1080p. How can I get 4k resolution?  

Read other answers

i cant enable bluetooth on my laptop pavilion dv6t-7000 running windows 10-64biti try automatic update driver and update windows but nothing change.can anyone help me to solve that

A:driver bluetooth for pavilion dv6t-7000 win 10

Hi: What model wireless network adapter does your notebook have? Most likely the bluetooth radio on the wireless adapter is not compatible with W10, but let me know the model, and I will see if there is a W10 driver that may work. If you don't know what model wireless adapter your notebook has, go to the device manager, click to expand the Network Adapters device category, and there you will find the name and model number of the wireless network adapter.

Read other 1 answers

Hi there please help me I need all drivers of hp pavilion dv6t-7000 notebook PC ,the product number is A3E87AAR,and serial number is [edited]

View Solution.

A:help me I need all drivers of hp pavilion dv6t-7000 noteboo...

Hi: Below is the link to the support and driver page for your notebook... http://h10025.www1.hp.com/ewfrf/wc/product?product=5273547&lc=en&cc=us&dlc=en&task=

Read other 3 answers

I have just bought Pavilion dv6t-7000 with windows 7 home premium, and I want to install original windows 8 but i can't..!!

I am Getting error

"Windows cannot be installed to this disk. The Selected disk has an MBR Partition table. On EFI systems, windows can only be installed to GPT."

I have search and found one link on HP, which says

Temporarily disable the EFI Boot Sources setting in the BIOS:
In Storage , Boot order Disable the EFI Boot Sources .

but in my laptop I didn't get any option like that..!!

Error: "Windows cannot be installed to this disk. The Selected disk has an MBR Partition table.On EFI systems, windows can only be installed to GPT." HP Pavilion u1596cn Desktop PC | HP? Support

Here are the steps what exactly I have done,

Step 1 - I have update my BIOS and now new version is f.23
step 2- Start install windows 8 with original DVD and Format drive C:
Step 3 - And now when I am trying to select any drive for windows 8 installation it gives above msg that

"Windows cannot be installed to this disk. The Selected disk has an MBR Partition table. On EFI systems, windows can only be installed to GPT."

So now what can I do..??!! Please Help me..

Thanks a lot,

A:I can not install windows 8 on My Pavilion dv6t-7000..!! :( Plz Help

As the new MOBO's now have a uEFI/BIOS firmware.
How to install Windows 64 bit on a uEFI/BIOS firmware:
UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with
UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

Read other 6 answers

My laptop fan is very loud and the laptop has started throwing an error about it during boot.  If I need to replace the fan, can you advise on the part number and instructions? Model #: A3E82AVDisplay info is Intel HD Graphics 4000.

A:HP Pavilion dv6t-7000 CTO Entertainment Notebook PC Fan and ...

Hi,Manual: page 26 lists the HP part and it's numberhttp://h10032.www1.hp.com/ctg/Manual/c03582006I assume yours is Intel processor powered board.For use only on computer models equipped with an Intel processor and a graphicssubsystem with discrete memory682061-001For use only on computer models equipped with an Intel processor and a graphicssubsystem with UMA memory682060-001�If yours is integrated graphics, get the second one.Page 77-81 replacement procedure. It needs major disassembly.RegardsVisruth

Read other 2 answers

My touchpad stopped working; I rebooted and the touchpad worked until the password eas entered and stopped working when computer unlocked. Used MS mouse to access settings; found the touchpad was turned off! Turned it to on position and it is working fine! How did ths happened?

Read other answers

il mio pc lenovo ideapad 110 da ieri pomeriggio mi sta creando problemi. in particolare il touchpad è del tutto ineìsensibile così come i tasti al di sotto, senza che vi sia stata alcuna caduta o utilizzo particolare. Sapete come posso fare per risolvere il problema prima di mandarlo in assistenza?
Google translated.......
my pc lenovo ideapad 110 since yesterday afternoon is causing problems. in particular, the touchpad is completely ine sensitive as well as the keys below, without any particular fall or use. Do you know how I can solve this problem before sending it for assistance?Thank you
Mod's Edit: Google translated for benefit of English readers. Since this is an English forum, please post in English as it will ensure a better response. Thanks!
Mod's Edit: Google tradotto a beneficio dei lettori inglesi.Poiché si tratta di un forum in inglese, si prega di inviare in inglese in quanto assicurerà una risposta migliore. Grazie!

Read other answers

Hitouchpad on notebook not working on remote desktop without touchpad...vertical scroll....OKhotizontal scroll...not working on the notebook....touchpad, OK, (synaptics is there), hotizontal plus vertical ...OKon the desktop without touchpad, synaptics not therequestion:It is possible simulate touchpad driver on the desktop ? 

Read other answers

So if you thought your new shiny Yoga had a bad touchpad, it may not be the touchpad at all! My Yoga 720 15.6 was acting really strange where every so often using the touchpad wouldnt work, and trying to use the keyboard wouldnt work at all. I first thought it was a touchpad issue but realized that this is a system wide issue. Something is causing Windows to start hitching. I turned off Adaptive Brightness in Power settings and the problem has gone away! I had a hunch it was this when I noticed the adaptive brightness was doing its job of gradually changing the brightness but looked like it was lagging while it was dimming/brightening itself. Lenovo Support: Please address this problem through any channels necessary because I want Adaptive Brightness but right now I have to have it disabled in order to use Windows without any hitches.

Read other answers

I replaced the screen on my Pavilion dv6, and to do that I had to take off the sticker that is over the display speakers. Now I would like to replace the sticker as it doesn't sit flat against the computer. In the manual the part is named display bezel screw cover (pdf page 98, booklet page 90) On the PartSurfer, under the display options it says "Speaker mesh sticker needed". So those are the two names I have found for this item. But I do not know how to obtain it. 

A:How can I get a Pavilion dv6t-7000 Speaker Mesh Sticker?

Did this not get an answer? I need one too and have only found price gougers wanting over $30 for the sticker. The stupid replacement screen cost only $75! Curse you HP! It is bad design to put screws behind non-replaceable stickers! Shame on your product managers for allowing such an explicit design flaw...

Read other 5 answers

So I have the same issue with 3 dv6t-7200 laptops. I went to HP site and the sticker is $191.70 each.    I am seriously confused and pissed if this is just for the sticker.  

A:Re: How can I get a Pavilion dv6t-7000 Speaker Mesh Sticker?

Hi @benmroz3, Welcome to the HP Forum!  It is a terrific place to find answers and tips! For you to have the best experience on the HP forum, I would like to direct your attention to the HP Forums Guide. First Time Here? Learn How to Post and More.  I understand that you are looking to replace the  mesh that covers the display speakers. You did locate one on the HP website but it was 191.70. Here is the HP ENVY dv6 Notebook PC Maintenance and Service Guide. When I checked the manual the part number is for the display screw kit which includes the mesh cover. The part number is 682093-001 and when I checked the HP Parts store, the price is as you stated $191.70. You can contact HP Support to see if they can order the part and provide you the price or if  you have questions. Contact HP Support  Fill out the online form and follow the prompts. You could also try a web search with the part number to locate one. Please let me know if this resolves the issue by marking this post as "Accept as Solution".  To simply say thanks, click the ?Thumbs Up? below!    If you require further assistance let me know and I will gladly do all I can to help.

Read other 1 answers

Hi all.

I have a friend who is having trouble making his Toshiba Satellite L50-A (PSKLWA-004001), Touchpad work. He said it hasn't been working several months so he has been using a USB mouse instead.

I first tried installing the driver from 'mytoshiba' and no drivers were available for windows 10 (64bit) so I tired the windows 8.1 driver and that didn't seem to work.

Then I saw that Synaptics had a windows 10 driver (same at pinned thread) especially for the touch pad so I installed the PS/2, SMBus one which I believe is the one built-into the laptop and it installed, restarted and no luck there either.

I did the latest windows updates and then it also detected an update for the touchpad driver, so it then installed via windows update and still no luck.

I know that this is not a simple case of Fn+f5 because the function key settings show that the touchpad is enabled and strangely the device manager does not have any device listed under mouse/pointing devices other than the USB mouse.

I believe this is a case, of the right driver has been found but is not installing, but I could be wrong .

Read other answers

hello, when i try to install the intelligent touchpad driver i get the error message "slp check failed". my OS is win7, installed on the 24gb ssd.

A:slp check failed when installing touchpad driver

ok it doesnt matter anymore, it seems to work with another driver now, but thanks for reading anyways!

Read other 2 answers

My XPS13 L322x cypress touchpad has completely failed.
I have tried uninstalling/reinstalling both the software and driver to no avail.
I have replaced the entire touchpad but this did not fix the issue.
Any further suggestions?

A:XPS13 L322x Win7 Failed touchpad

Hi Sophia Pearl
Thanks for writing to us.
If the touchpad is not working inspite of replacing the hardware and updating the drivers the only other component to be suspected is motherboard.
Do provide us your system tag#, email address and name via private message,by clicking on my name
in blue and then select send a private message.
Let us know if you wish to know the part# for the motherboard.

Read other 1 answers

Hi, I tried to install the sypnaptic touchpad driver but failed and it showed the message below . I have tried both the driver downloaded from the hp website and sypnaptic website and they both failed.  I did find a forum saying that it could be trustedinstaller.exe that is missing so I tried looking into that but the  programme is still there. I've been using my touchpad regularly recently so it could be of great help if there's a way to solve this.  

A:Failed to install synaptic touchpad driver

mlinh_to wrote:Hi, I tried to install the sypnaptic touchpad driver but failed and it showed the message below . I have tried both the driver downloaded from the hp website and sypnaptic website and they both failed.  I did find a forum saying that it could be trustedinstaller.exe that is missing so I tried looking into that but the  programme is still there. I've been using my touchpad regularly recently so it could be of great help if there's a way to solve this.  Try installing this driver and see if the issue persists: http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48277.exeThis is the official HP driver listed for your notebook model.

Read other 1 answers

Hi just got my new laptop yesterday , DV6t-7000, and before posting my problem I've search everywhere include these forums for a solution.  I've all ready updated the bios, and updated the 650m with the newest drivers from HP's website.  I know that in the bios under "system configuration" there should be an option to change from "dynamic" to "fixed" graphics, but that option isn't there.  Was looking forward to using this laptop for gaming, but was thinking that since I'm still within my 21 days that I should just return the laptop and maybe wait until they fix this issue.

A:DV6t-7000 Quad Help with Geforce 650m switchable graphics

still hoping, looking for a solution

Read other 9 answers