Over 1 million tech questions and answers.

Inspiron 3668 remove filler bracket?

Q: Inspiron 3668 remove filler bracket?

Working with a new Inspiron 3668 and trying to install expansion cards. Three slots are available.
There is a hardware wrinkle that is new to me. This box uses a card retention bracket that is attached to the chassis. it swings down and snaps in place--no screw as in the other Dell boxes I have used. Nice idea.
However, the card filler brackets (the metal strips you remove when you insert PCI cards) aren't "floating" the way they do on my other Dells. They are attached somehow, and I see no obvious way to remove them. Do I pry them up or push them in or do something else? The brackets have a cross-shaped cutout as if for a Phillips screwdriver.
The 3668 service manual is quite helpful for many topics, but neglects this one, unfortunately. I appreciate any advice to help me not break anything.

RELEVANCY SCORE 200
Preferred Solution: Inspiron 3668 remove filler bracket?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Inspiron 3668 remove filler bracket?

If its what I'm thinking of they are 'welded' or soldered on with gaps to use a flat head screwdriver to push them out.

Read other 2 answers
RELEVANCY SCORE 66

Just got an Inspiron Desktop 3886.  Looking for the 2.5in SSD caddy.
Saw some other threads about this part number, but want to make sure its the same for the 3668.

Dell Part# X9FV3

Thanks!

Read other answers
RELEVANCY SCORE 65.6

Hi!

I am considering purchasing a Dell Inspiron 3668, but I have a few questions about the power supply first.

1:  What are the dimensions of the stock power supply?

2: Can it be easily removed?

3: Will something like one of these be a good fit?
EVGA 850 GQ
Corsair RM 850x
I am guessing that my current Corsair HX 750 will not fit.

Any help would be appreciated before purchasing!

A:Dell Inspiron 3668 PSU Questions

You need to look for a system in a larger chassis - just about nothing will fit inside these other than the OEM power supply.

Read other 1 answers
RELEVANCY SCORE 65.6

Since there is only one hard drive power slot on the the motherboard, which cable splitter should be used which can connect to the HHD in the 3-1/2 inch bay and the SSD in the 2-1/2 inch bay, as the two bays are about a foot apart.  Just realized that a splitter cable can be used that would bridge the two drive bays;  This allows the power cable from the Hard Drive to be split into two; with one female end going into the original HHD (hard drive) and the other female end going into the SSD.  Just would like someone from Dell to confirm that this would work before buying the splitter cable and attempting the installation.
www.amazon.com/.../ref=sr_1_2

Read other answers
RELEVANCY SCORE 64.8

I just purchased an Inspiron 3668 i5-7400. I need to upgrade to a power supply with at least 360 watts and am having great difficulty because the form factor of this Inspiron's power supply is very different  (about 9"x3.25"x2.5") than most PCs. Does anyone know of sites that have such power supplies? Been searching Amazon, Newegg, etc. without any luck.

A:Power supply for Inspiron 3668 i5-7400

The only way you're going to be able to put that capacity power supply in that system is to leave the actual power supply box outside the system and run the cables inside.
You will also most likely need an adapter to use a standard power supply with the mainboard in the Dell, which very likely uses an 8-pin connector.
www.amazon.com/.../B01A210HKO

Read other 1 answers
RELEVANCY SCORE 64.8

I have a Dell Inspiron 3668
Specs are:
i3 7100
1 tb
8 gb ram
Can i install Gtx 1050ti in this computer.

Read other answers
RELEVANCY SCORE 64.8

 
I have a Dell Inspiron 3668 with Window 10 Home. 
In the latest Microsoft update: July 11, 2017—KB4025342 (OS Build 15063.483), and the previous one from June 13, 1017, my computer has an issue with the audio.
When I plug in my headphones/earbuds, the audio has an echo type effect to it; the sounds are extremely left or right (there is no balance in the middle). It is as if I am listening to the sound behind me, or in the distance. I have tested this audio with videos, music, and games, and compared the sound balance issue with other devices (laptop, phone, mp3) by testing the same audio files.
I have already reinstalled the Realtek HD Audio Diver and I have adjusted the audio enhancements in the WAVES MaxxAudioPro audio - the issue persists.
The spatial sound is turned off and all enhancements are disabled in the Sound options.
Also, under the “Sound, video, and game controllers” section in “Device Manager,” there are two devices: Intel® Display Audio and Realtek Audio. Is it normal to have both of these present? Is there a method to disable the updates from automatically adjusting the audio?
This computer is less than two months old. I don't want to return it. 
Please help me fix this audio problem.
 
 

A:Dell Inspiron 3668 Audio Problem

Hi GingerSnapz,Thanks for posting.If the driver is already up to date. This may be resolved by disabling realtek audio in device manager -> restart -> enable.If updating drivers doesn't work, the problem might not be caused by drivers. You can try to run Audio Troubleshooter and see if it helps. Refer steps below:1. Type "Troubleshoot" in Windows search.2. Click "Playing Audio" then follow the on-screen instructions.

Read other 2 answers
RELEVANCY SCORE 64.8

I have a Dell Inspiron 3668 I7, 16Gb ram, Graphics card, 2TB HDD.  I have a 250 G SSD, caddy, and SATA power in hand to be installed.  Power for this SSD comes from the second HDD power jack (jack #8 in the manual.
Because of reasons I won't get into here, I have 4 external HDDs in enclosures with USB 3 interfaces and I need to have anywhere from 1 to all 4 of these drives connected and on-line depending on the application.
I would like to install a 4 port USB3 PCIe card on one of the available PCIe slots.  Problem is these cards require some sort of power (either a molex or SATA) cable to work properly.  One worry I have is the power supply in this system is only 240 watts and I am wondering if it will be enough to drive the USB card and where will I get the power from?
Does anyone have suggestions or comments?

Read other answers
RELEVANCY SCORE 64.8

Hello Dell,
  I have a Dell Inspiron 3668 with Waves Maxx Audio Pro installed.  I have been trying to figure out how to get RID of the echo/reverb sound that spews forth from my speakers.  I've been reading everyone else's post about the same stuff and the only answer that seems to be given is to uninstall and then re-download the realtek drivers and I think reinstall Waves Maxx Pro.  My question is this: can we dispense with all the install and uninstalls and use something else?  I have no idea what else to use, but the last time I bought a Dell computer I used Turtle Beach soundcard and software, maybe this is an option.  I despise the sound that my speakers are making at this moment.  There has to be some other software that can be used since it appears that realtek and maxx audio pro are fighting each other.  Come on guys, most of us WANT a positive music experience with our computers and I am one of them. Figure something else out for us.....

Sign me Completely DISAPPOINTED....

Read other answers
RELEVANCY SCORE 64.8

This is a new PC. 2 weeks old at longest.

2-3 times has not come out of sleep. Have had to hold power button to power down. It has come back up seemingly fine. The last issue was, i actually tried to shut it down myself after working on it. It seemed to be working fine and shutting down ok. Got a message saying "to save your work click cancel and go back". I hit cancel to see if there were anything needing to be saved or stopped. Instead, i got a second message stating, "Shut down blocked". Then seemed to have froze. I shut it down holding the power button. Upon start up, it gave me the option to check windows repair, or something like that. I went ahead and ran it and it said, windows repair could not repair your PC. I went and ahead and started it up normally, i noticed that Firefox tried to recover the previous sessions. I have noticed firefox crashing a few times as well.

I ran Malwarebytes threat scan, no issues. I checked malware bytes reports and noticed there were two websites blocked recently, WWW.CONVERTPDFSNOW.COM. Which i do not recall using, will have to ask my daughter if she was trying to use that.

I thought it was unusual for the new PC to not come out of sleep mode so many times now.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i5-7400 CPU @ 3.00GHz, Intel64 Family 6 Model 158 Stepping 9
Processor Count: 4
RAM: 8100 Mb
Graphics Card: Intel(R) HD Gr... Read more

Read other answers
RELEVANCY SCORE 64.8

I went to the windows 10 forums and they told me to find an amd supported driver by dell for my amd graphics card and also to revert my intel rst graphics card to a previous update. I cannot revert the intel graphics card updater through device manager and when using the "detect driver" function on dell support there was no mention of any updates needed. does anyone know how i can find amd drivers supported by dell? the driver i have currently was auto detected by the amd website.

A:Dell inspiron 3668 BSOD due to drivers?

Exactly what BSOD are you seeing, and when do you see it?
Dell's AMD drivers for the 3668 with Win 10 are here:
www.dell.com/.../driversdetails

Read other 1 answers
RELEVANCY SCORE 64

I am looking at the "new" Inspiron Desktop, & there is a discrepancy with what rear USB sockets come on this model. The general description says 4 x USB 2.0 on the rear, but the numbered picture at the bottom says 2 x 2.0 & 2 x 3.0 Can anybody confirm which is right?

A:Dell Inspiron Desktop 3668 Rear USB sockets 2.0 or 3.0?

According to the manual, the front ports are USB 3.0 (2 of them) and rear are 2.0 (four of them).
www.dell.com/.../Set-up-your-computer

Read other 1 answers
RELEVANCY SCORE 64

Hello, i recently got a Desktop Inspiron 3668, and i immediately noticed this problem:when i plug in the power supply, the pc turns on for just 1 second (all leds on, all fans working) then it shuts down automatically. Obviously there's no boot, just leds, fans and HDD working for 1 second. Then if I press the start button, it will boot correctly and no error message appears.  If i shut it down, it will shut down correctly. This problem occurs every time i connect the pc to the powert supply, or simply when i turn on the power strip. But, if i turn off the power strip (or disconnect the power supply) for less than 3-4 seconds, and then turn it on, nothing happens.No other problem on this pc, complete PSA test passed, complete online test passed. The problem appears even when there's nothing connected to the pc (no monitor, no usb, no keyboard) and any "Wake on" option is disabled from BIOS.Already send it to a dell repair center, where they changed CPU and motherboard.Any idea on how to solve this?my pc has this specs:
Intel Core i3-7100 (cache 3 MB, 3,900 GHz)
Windows 10 Home (64 bit)RAM 8 GB, DDR4, 2.400 MHz
SATA 1 TB ( 64 MB) 6 Gb/s 7.200 rpm Intel® HD 630 Dell Wireless 1707 Card 802.11bgn + Bluetooth 4.0
Driver wireless Dell 1707

A:Inspiron 3668 does a fake start when power is supplied

Do you turn off the computer by using the Shutdown command and not Hibernation that responds to a power interruption and wakes? I'm sure you do but had to ask. This model has a motherboard more like a laptop than a desktop. Its only main power is the adapter--no internal battery power--so you should not be unplugging and replugging. Treat it the same way you treat a normal power cord--unplug only when the computer is off and will not be used for extended periods of time like vacation. When you connect power it might wake the computer if the computer is not completely turned off. Or just it turns on lights and fan and shuts down when the computer is not already on.
It is my understanding that adapters should not be plugged into inexpensive power strips without battery backup. Try a direct connection to an outlet or buy a UPS unit instead of using a power strip. That is much better.Those UPS units can handle power adapters. Like this--www.newegg.com/.../ID-72
Check the bios setting for action after power interruptions. Make sure it is not set to turn on.

Read other 5 answers
RELEVANCY SCORE 63.2

I have been on the phone 6 times and chats 4 times trying to get the nimrods at customer service to identify and sell me SATA cables for a second hard drive I purchased for my brand new 3668. I bought a 1TB 2.5 inch Seagate drive and it came without cables or mounting hardware.  NO ONE HAS BEEN ABLE TO HELP ME!!  This is easy s*** my friends.  Two bloody cables.  One for power and the other data.  I have talked to Customer Care, Sales, Technical Support and they keep bouncing me around.
Does anyone have a phone number to Corporate I can call?  This is ridiculous.  I don't think I will EVER buy anything from Dell again.
> Frustrated Bob in NJ

A:Cables for 2nd hard drive - Inspiron 3668 - Idiots at Dell...

You don't need to buy cables from Dell. Open up your case and see what type of SATA III cable is being used and where to locate your new HDD. Do you need a SATA cable with a straight or a right angle connector at the ends? Do you need an 18 inch cable? Does your power supply have an extra power connector for your HDD? After you get this information go to Amazon or Newegg and order your cable; you don't need a Dell cable, SATA cables are industry standard. You will probably save some money and seeing the inside of your computer will help you plan the installation.
Be sure to look at the mounting of the existing HDD. What you may need from Dell is the hard-drive assembly with release tabs if it does not come with a spare assembly. See the Service Manual section on removing the HDD.

Read other 2 answers
RELEVANCY SCORE 63.2

Hi all,
What's the best solution to get a decent dual monitor setup for our new Dell desktop?
We currently have two AOC monitors connected one via HDMI, one via VGA but the user is complaining that the VGA one is a bit blurry.
Do we just have to *** it up or would using a VGA->HDMI converter improve things?
How about adding a cheap video card with a Displayport port?
Or should i just be able to set the monitor up manually to best cope with the VGA input.
All thoughts welcome :)
TVM, Dan

Read other answers
RELEVANCY SCORE 60.8

Hello. Jist bought inspiron 7566 highest spec with 16gb RAM and 500gb ssd m.2.
I want to add 2.5 ssd hard drive but i can't do it. The sata cable and the bracket is missing.
Can't find anything on ebay or dell parts.
Please help me to find a solution.

Read other answers
RELEVANCY SCORE 59.6

Hello all,
Where would I be able to acquire the brackets that are connected to the harddrive as well as the interposer cable? Those items didn't come with my 7567 so I'll need them for my 1tb Samsung 850 EVO.
See attached pic for bracket and cable

Read other answers
RELEVANCY SCORE 58.8

Hello,
I'm looking to add a second 3.5" HDD to my Inspiron 3650.  What is the part number for the bracket that I would need to install a drive into the second 3.5" bay?
Thanks,
Damin.

A:3.5" Hard-Drive Bracket for Dell Inspiron 3650

DaminKeenan
Hello,
I'm looking to add a second 3.5" HDD to my Inspiron 3650.  What is the part number for the bracket that I would need to install a drive into the second 3.5" bay?
Thanks,
Damin.
DaminKeenan
The bracket may not be available, because the Inspiron 3650 specifications state that only 1 x 3.5" hard drive is supported, but 2 x 2.5" hard drives are supported, see page 12 Here:
http://downloads.dell.com/Manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/inspiron-3650-desktop_Reference%20Guide_en-us.pdf
Bev.

Read other 2 answers
RELEVANCY SCORE 58.4

Well done dell... You make an easy to upgrade model but expecting the user to dig into the internet to find one mounting bracket to fit?
I recently purchased 7567 the highest spec, expecting I could add hdd myself since the highest config does not include one. The shipment finally came after contacting online support for the past one and half week, I was ecited and with a brand new hddq aside I was ready to turn this machine a beaster beast. *** ya, the back lid was off, and.... There is no mounting bracketincluded in hdd slot. I tried looking into ebay but none was found.
Does anyone happen to know why Dell doing this and how this mounting bracket could be obtained?
Thanks!

Read other answers
RELEVANCY SCORE 57.6

Brand new Inspiron 3668 with Windows 10
When I select Alt-Tab as shortcut to see the Task View (of all open Windows), I see multiple blank tiles with "3459" in the title. See screenshot.

Only two active windows are open. I can switch to these fine. But the longer I use the PC, in the Task View, additional 3459 windows keeping opening and adding to the list. You cannot switch to them - just noise in the task view. Any thoughts what might be creating these fake windows?

Read other answers
RELEVANCY SCORE 57.2

I need to install a PCIe Firewire card in a new Z240 but cannot for the life of me figure out how to remove the bracket pictured below, which holds in place the Nvidia graphics card.... ....but also holds in place the normal PCI retainer clip. I have searched for instructions on this particular bracket but have found nothing, and have tried gently to move it from various angles but there seems to be no way to pull it out without putting immense pressure on the Nvidia card itself.  In the image below, the button (1) can be pressed down, and it does pull back on the wedge portion (2) which is tucked up behind the rim above the pci openings, but pushing down on the button does not come close to pulling the wedge portion clear.  As shown below, the bracket actually pins the normal PCIe retainer clip in place (1), so there is no way to open the space for a PCI card without getting this bracket off. The bracket also is directly on top of the Nvidia card (2), so if one were to push REALLY hard downward to try to remove the wedge from under the computer case rim where it is being held in place, that force would also go directly onto the top of the graphics card, which seems like a bad idea.  There must be some direction in which one can apply significant pressure to get this bracket off, but I don't want to try and discover it by trial and error, because I don't want to break the Nvidia card. Or maybe there is some simple solution that I am mis... Read more

Read other answers
RELEVANCY SCORE 57.2

Hello, I just bought the arctic cooling silencer rev 3 vga cooling fan, but before I can install it, I have to remove a sqare shape metal bracket that encircules the GPU. I have the AIW 9700 and was wondering how I can remove this ring. Tips on how to remove the ring would be greatly appreciated thank you.
 

Read other answers
RELEVANCY SCORE 57.2

Ok, I i want to buy a wireless card, but my computer is slim so It can only use low profile ones. I found a bunch of cards i like, but they'll all Normal size brackets.

I was wondering If I can remove the bracket so it'll fit in my case.
Or will it cause some kind of problem?
 

A:Can I remove the bracket from PCI cards to make them low profile?

Read other 7 answers
RELEVANCY SCORE 56.8

Since Windows automatically updated to the Anniversary version I've had problems.  I've isolated it to the graphics card (AMD Radeon HD6850) I've decided to update my graphics card and went through the steps as detailed on the Technical Support page for my model.  However it states the only tool needed is a flathead screwdriver.  The retaining bracket and the slot lock are both secured by a screw requiring something other than a flathead screwdriver.  My guess is it is a torx screw.  Does anyone know exactly what I'll need to remove those?

A:Question on tool needed to remove the retaining bracket and ...

Hi, Documentation video shows torx head screws so you need a torx head screwdriver. Graphics Card Retaining Bracket removalBefore you begin: Remove the access panel.StepsDetach the two screws securing the graphics card retaining bracket to the PC.Pull off the bracket.Graphics Card Retaining Bracket replacement StepsThere are two tabs on the side of the bracket that fit into two slots on the side of the PC.To replace the bracket, align the tabs into the slots then swing the bracket down into place.Secure the bracket to the PC with the two screws. Review this manual.

Read other 1 answers
RELEVANCY SCORE 56.8

Can someone assist me in finding out which option is best?

Should I use this Amazon.com: Monoprice 107637 1 Port Internal SATA to eSATA Bracket (107637): Computers & Accessories

or something like this: PCI Express SATA III Card - PCIe SATA 6Gbps | StarTech.com

Will the latter perform as fast as the former? (Or will the former even work given the lengths of the cables I have to use?)

Also, I'm getting really confused when it comes to the maximum length of the sata to esata. The esata bracket comes with a 20 inch cable... and the esata cable that comes with my external drive is about 20 inches. That makes an even 40 inches. I know the maximum sata length is 40 inches... and I don't want this 40 inch chain causing corruption.....

What should I do?

***I also want to make sure using the pci express port isn't going to cause any issues with the graphics card... and I really want to make sure I'm using the fastest method possible

A:PCI Express Esata Bracket or Direct Bracket?

bump. Right now, I'm averaging 110mb-150mb a second with this bad boy Amazon.com: Mediasonic ProBox HF2-SU3S2 4 Bay 3.5" Hard Drive Enclosure - USB 3.0 & eSATA, Support SATA 3 6.0Gbps hard drive transfer rate: Electronics (WD Caviar Black).
Through using a usb 3.1 port on my mobo.

Would sata be that much better?

Read other 9 answers
RELEVANCY SCORE 45.2

I am looking for software, that I could use to fill out checks. When I try to search the web for one I end up with programs that would print a check on blank paper. I am just looking for a program that would fill out a normal check as a typewriter would.

Any help?
 

A:Check filler

You might look at RoboForm, that might do what you seek.
 

Read other 2 answers
RELEVANCY SCORE 45.2

Hi,
Does anyone know where on the web there is a program that is free that i can type on pdf forms and save them. Foxit reader kept putting evaluation marks on the form unless i boulght it.

Regards

A:PDF Form Filler

CABAReT Stage http://www.cabaret-solutions.com/en/produc...age/bundle_home

Read other 2 answers
RELEVANCY SCORE 45.2

Hi==
Does anyone know of a form filler similar to WebM8 that is not as costly? I don't want to use IE.
thanks
Joe
 

A:form filler

http://www.roboform.com/ It's freeware.
 

Read other 1 answers
RELEVANCY SCORE 45.2

Does anyone know how to take the little filler between tracks out of audio files??

Thanks Matt
 

A:CD Audio filler

Read other 7 answers
RELEVANCY SCORE 45.2

Firefox has a great feature "fill out this field" . Is there anything similar for IE7....???

A:IE7 form filler..?

I'll move this over to the Web Browsing forum since it hasn't been answered here.

Read other 3 answers
RELEVANCY SCORE 44.8

why does the form filler remember some of the forms I have filled in but not others?
 

A:MyIE2 form filler

I assume you are talking about the RoboForm plug-in.

Fillform doesn't "Remember" what forms it fills in. It just fills in information on forms which is recorded in it's identities record when you ask it to. It has no record of which forms are filled in.

Access the "Identities" record by clicking the tray icon and selecting Identities/Edit.

Or in the RoboForm Toolbar, click the arrow next to "RoboForm, highlight "Windows" and select Identities from the pop out menu.
 

Read other 2 answers
RELEVANCY SCORE 44.8

does anyone know of a free program that can change a .pdf to have the ability to type on it and print and possibly save it?
 

A:Adobe pdf form filler?

Read other 9 answers
RELEVANCY SCORE 44.8

I'm putting together a Blog and I am adding a Questionnaire which I would like to be Filler Active. Could someone please assist me with this? I do have Libre Office and Open Office as programs in my system if needed. Thank you!

Read other answers
RELEVANCY SCORE 44.8

Hello,
I got thousand's of music files and I want to fill them with tag's. What program you would recommend for auto filling directed music files with tags?
EDIT: Program should automaticly find tags in internet.
 

A:Music files tag's filler

Free: Picard
Not Free, but free trial: Jaikoz
 

Read other 1 answers
RELEVANCY SCORE 44.8

I am looking for some type of software that can export data from a database and automatically fill in designated fields on a form.

Another option would be to fill out one general form and have the program automatically fill out the data on multiple other forms. The general idea is to avoid filling out multiple forms with the same information manually.

Any info or ideas would be appreciated.
 

A:database form filler

I've never used anything like what you are referring too, but I did find this website that may be what you are looking for

http://www.roboform.com/
 

Read other 1 answers
RELEVANCY SCORE 44.8

Windows 7 Home on a PC

I am unable to get the Firefox Form Filler add-on to work. I've added all of my information and I've followed the directions but it doesn't fill any forms.
I had Robo-Form but it doesn't work on this Firefox and it only remembers 10 passwords and I didn't like LastPass.

Is there a secret to getting it to work?

Thanks!
 

A:Firefox Form Filler Add-on

Want to try this one? https://addons.mozilla.org/en-US/firefox/addon/pdfescape-extension/
 

Read other 2 answers
RELEVANCY SCORE 44.8

I just installed Adobe Acrobat 4.05 on my IBM Aptiva 500 running Win 98. I then tried installing Adobe Filler and the install aborts claiming that it can't find Adobe Exchange v3.0 or above. What is Adobe exchange? When I look at Adobe's site I can't find it. Of course it doesn't help that their site search engine wasn't working this morning nor the ability to write technical feedback to them. If anyone knows and can help me, I'd appreciate it.

 

A:Adobe Acrobat Filler

Assumption:

You've installed the full-blown version of Acrobat and NOT Acrobat Reader, is that right?

Questions:

Did you uninstall any previous versions?
Did you do a complete install? To my knowledge, Exchange came with Acrobat.
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hi again folks. I was on Computercops/biz and ran across a freebie Password & form filler called www.handypassword.com and wondered if anyone has heard of or used it. Novasoft, established in 1992 is providing it, however, the about us site shows address in Novosibirsk, Russia. It says it's a world wide provider of Integrated technology, but wondered if it would be safe to use.
Appreciate your feedback. Thanks donricha
 

A:Password & form filler

Read other 8 answers
RELEVANCY SCORE 44.4

Sorry for the slightly duplicate question, but I haven't seen any exact instructions for adding an SSD drive to a 3668 desktop. I've seen that it needs a splitter for the power portion of it, but not any actual instructions, or if it needs a bracket of any sort. Maybe there are instructions for another model that are exactly the same? I'd like the SSD to be primary and the 1 TB that comes with it to be secondary. Thank you.

Read other answers
RELEVANCY SCORE 44

I use OmniForm 5.0 and its Filler program on many client computers (100+) to process form documents. Program works flawlessly under XP. With the use of Vista I have a few computers that have been experiencing the same problem.. in trying to open certain forms Windows pops up a error window that says it has encountered a problem and needs to shut down.

This is a problem that occurs only on Vista, and only on a few (4-5) machines. OmniForm Filler will always open OK. However, when I attempt to open certain individual forms it begins to open the form and after several seconds pops up the error message. Sometimes the form will open and everything will work OK, but when you close the form and try to reopen it shuts down. It seems that if the forms is a larger document that it takes more time to open it and somehow the system times out.

The following is a copy of the Event Log that was created:

Error 1/9/200Error 1/9/2009 12:47:57 PM Application Error 1000 (100)9 12:47:57 PM Application Error 1000 (100)
Log Name: Application
Source: Application Error
Date: 1/9/2009 12:47:57 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: ggfh-PC
Description:
Faulting application OmniFill.exe, version 5.0.0.0, time stamp 0x3ba28a52, faulting module OmniFill.exe, version 5.0.0.0, time stamp 0x3ba28a52, exception code 0xc0000094, fault offset 0x000852de, process id 0x348, application start time 0x01c97... Read more

A:OmniForm Filler 5.0 closes when opening

Contact Omniform. Chances are that so few people here use that application, and even fewer will have any technical knowledge to be helpful.http://support.nuance.com/

Read other 3 answers
RELEVANCY SCORE 44

You guys probbaly heard of oblytile the custom tile maker for win 8.

It has an option to convert shortcuts to tiles but its not detecting most of my shortcuts.I know you can manually choose the program path but it doesnt work when different shortcuts share the same .exe .

For example the Office Infopath 2013 is in fact 2 programs : InfoPath Filler and InfoPath Designer and Indeed ther are 2 shortcuts.But they are not detected by Oplytile so I have to point the program path to the Infopath.exe. The problem is that the tile created opens the Infopath Filler and not Designer which I inted to use more often.

So how should I proceeed in order to add to oblytile shortcuts list the above programs or maybe there is a way to make the Infopath.exe to open the Designer instead the Filler?

Read other answers
RELEVANCY SCORE 44

We are looking for some type of software or program that can extract contact information from a current database and insert the data into specified fields in a pdf fillable form (i.e. name, address, social security number, etc.)

We are a financial planning firm and store information about all of our clients/prospects in a database called Client Data Systems made by EZ-Data Inc. The database is similiar to Access (I think) in that it stores data in tables that correlate to specific areas of information regarding each particular contact in the database.

We spend a signifcant amount of time filling out forms and applications for each client. For some clients we end up filling out 10 or more forms and most of the time we are filling out the same information, like name, address, social security number, and birthdate. In our opinion this is a huge waste of time that should be able to be solved with the right technology.

We would like to find a way to have each of these forms/applications saved as a fillable PDF document. We would then specify the contact whose information needed to be in the forms and the program would automatically extract the data from our database and insert it into the specified fields in the form.

If anybody has any ideas please let me know.
 

A:Form filler/database extraction

Sounds more like a mail merge function. You could also do it in a mail merge sort of setup and then output the Word docs to distiller. There are ways for Acrobat to connect directly to back end databases like SQL. Here is just one article I have found:

http://www.planetpdf.com/mainpage.asp?webpageid=1945
 

Read other 2 answers
RELEVANCY SCORE 44

Does anyone know about a good Freeware PDF form filler program or Ajax site where I can upload/open a pdf to fill in the forms on it?

If Yes. PLEASE reply!!

TIA
 

A:PDF Form Filler -- Online or Offline

www.pdffiller.com is one of possible solutions. It is very simple: you can upload, print, Email, fax, or export your form. Additionally you don`t have to install any software.
 

Read other 1 answers
RELEVANCY SCORE 44

How do I stop my comp.from remembering names or #`s I type?

A:Auto Complete/form Filler

Tools, Internet Options, Content, Auto Complete.

Read other 3 answers
RELEVANCY SCORE 44

Hi,

I'm currently using Roboform to fill in any forms and passwords and it's coming in really handy.

Only problem is it's not freeware and now it has stopped working and will only allow me 10 passwords.

Can anyone recommend something similar, that is freeware?

Thanks!

Sarah

A:Form filler/password manager

key walletKeyWallet is a desktop utility that spares you the trouble of filling in your logins, passwords, and other personal data manually. You can automatically fill in data in browser forms (IE, Netscape, Opera, and so on), Java applets, Windows forms, and others. KeyWallet supports skins and encrypts your data using the Blowfish encryption algorithm.freeware also, aww cute baby

Read other 4 answers
RELEVANCY SCORE 43.6

I was wondering what is the max watts the PCIe x16 card slot can draw in the Dell Inspiron 3668 desktop?

A:3668 Max Watts Used In PCIe x16 Slot?

I believe the max wattage ANY pcie x16 slot can draw is 75w.  If you go over that you have to use a 4-8 pin plug from the power supply.  

Read other 1 answers