Over 1 million tech questions and answers.

Headphone/Front Jack Audio w/ Realtek HD Audio

Q: Headphone/Front Jack Audio w/ Realtek HD Audio

(Not sure if I am posting in the right place, move me if necessary)
 
Hello BleepingComputer
 
I just upgraded my computer a few days ago, and I am having problems with the Front Jack Audio/Headphone.
 
Normally, I set my Headphone to run simultaneous with my Speaker with Realtek HD audi/Stereo Nix (Disable Front Jack Detection and vice versa), and I could change the volume on both devices separately.
But since I changed the motherboard, when I have realtek installed, it doesn't have the Headphone setting in Sound/Playback.
The headphone work perfectly, but its linked to the Speaker's volume, which is really annoying.
Also, the Realtek layout changed from the last one I got, and doesn't have the "Disable Front Jack Detection" option.
(Picture: http://i903.photobucket.com/albums/ac232/notyellowasian11/Untitled-1_zps2242cdba.jpg)
 
So far, I have tired..
Installing an older version of Realtek driver;
Changing the audio setting in the BIOs (HD or AC97)
Changing the audio connector on the MOBO (Hd or AC97)
Tried multiple compinations with Realtek HD audio manager settings.
Cleaned every plugs/jacks related on that.
 
So far, I couldn't been able to get the Headphone tag at all when Realtek is installed.
 
Thanks !
 
---
Here's my spec:
MOBO: ASUS P8Z77-V LX
Audio: Realtek ALC887 (MOBO default)
CPU: Intel Core i&-3770k 3.50Hz
RAM: 2x 8 GB DDR3 Corsair
GPU: Nvidia GeForce 9800 GTX+ 512 MB
OS : Windows 7 Ultimate 64x
 
Current Audio Driver: Realtek HD Audio R2.73 v6.0.1.676

RELEVANCY SCORE 200
Preferred Solution: Headphone/Front Jack Audio w/ Realtek HD Audio

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Headphone/Front Jack Audio w/ Realtek HD Audio

could try ....
 
Control Pane>View by category>Hardware and Sound>Manage Audio Devices>(select device)>configure
 
It's  a long shot, I know. Just putting it out there.

Read other 2 answers
RELEVANCY SCORE 127.6

My internal speakers seem to work fine but I can't get the sound to go into my headphones when I plug in my headphones. Is there a way how to fix this?
 

A:Problem with the Headphone Audio Jack with realtek HD audio

Read other 10 answers
RELEVANCY SCORE 127.6

omg, I was switched to a different pc at my job and the person there previously downloaded realtek to the pc and im having a problem with the headphones, when i put the headphones in i get a pop up confirming the action but im still hearing music from the speaker...its really annoying because im use to just pluging in the headphones and everything being normal...im not even sure why she downloaded this program, anyhow if you can please help, i need my music to keep me sane at work, its sooo ver depressing. the operating system is microsoft windows xp
 

Read other answers
RELEVANCY SCORE 120.4

I cannot get beats audio working via front speaker headphone jack following upgrade to windows 10. Can you provide a link to the relevant drivers please? Error Message from windows update : ? IDT - Audio Device - IDT High Definition Audio CODEC - Error 0x8007001f

A:Beats Audio not working on front headphone jack

I tried to download drivers from HP but keep finding this message: HP encountered an error while trying to scan your product.Please verify your product is powered on and connected, then try again in a few minutes.Or, view all available drivers for your product below. HP has no problems identifying my PC, details as below: Product name = h9-1335eaProduct Number = C5V41EASerial Number = [Personal Information Removed] 

Read other 3 answers
RELEVANCY SCORE 120.4

I have a Gigabyte GA-P55-UD5 motherboard with on-board sound by Realtek, and my case is Thermaltake's "Element G".

I connected the front panel audio cable to the designated connection on the motherboard, however, whenever I plug-in my headphones, the stereo is reversed! Meaning that the headphone for the Right ear is playing the audio channel for the Left ear, and vice versa.

I end up having to wear my headphones in reverse to enjoy correct stereo sound.

I checked the front panel audio connection to the motherboard, thinking that maybe I plugged it in the wrong way or something, but apparently there is only one way to plug it in.

My first guess was that this was a design flaw with the case, and that they mixed up the audio channel connections in the front panel. However, when I plugged my headphones DIRECTLY to the REAR audio jack, it's exactly the same story!

The fact of the matter is that the on-board audio is mixing up the stereo channels! I actually remember that on my previous computer with on-board audio it was the same exact problem.

1) Is this a known issue with on-board sound cards in general?

2) Most importantly, is there any way I can fix this in Windows 7? Reverse the stereo channels so that they are outputted correctly?

Thanks in advance!!

A:Front audio headphone jack reversed stereo...

Never mind. I tried a different pair of headphones and there was no problem. Apparently my cheap "Sony" headphones were just defective.

Read other 5 answers
RELEVANCY SCORE 118.4

I've been finding a solution for days now and I still haven't found for this. I am using windows 7. I can clearly hear music from my 2 speakers, but when I plug my headphones into the front jack inputs......no sound! in the playback devices,it shows my headphone is not plugged in!! The mic works fine. I have DL'd the latest realtek drivers and made sure all mute's are off but still nothing. If anyone knows how to fix this, you will be a better man than I. thank u in advance
 

A:No Sound From Headphone Jack With Realtek Hd Audio Device?

hi,

Was your PC built for you or did you buy it in a shop?

If it was built for you, you might want to check that the front panel connectors are connected to the motherboard. I have seen many people forget to do this.
 

Read other 2 answers
RELEVANCY SCORE 118

Front headphone jack is now assigned as a communications device (basically call-center style headphones & mic).  I am unable to use this jack for regular headphones any longer.  I am unable to change the assignment back to simply 'headphones' -- the original setting when the PC was manufactured by HP.  Also, Beats Audio (and its Control Panel) no longer works and HP has no software download for my PC for it ("cannot find .startup file!").  How do I reassign the front 3.5mm headphone jack to be what it used to be and how do I get Beats Audio from HP if their support website doesn't even let me choose the software?

A:Front Headphone Jack Reassigned; Beats Audio No Longer Avail...

Welcome to the HP Support Forums @maadiman70! I understand that you were having an issue getting your headphones to work. I will do my absolute best to help you resolve the problem on your HP Pavilion HPE h8-1300z CTO Desktop PC.  As you know the HP Pavilion HPE h8-1300z CTO Desktop PC software and driver page does not have supported drivers for Windows 10 available.  When did the headphone jack stop working?When did the Beats Audio stop working?Have you tried to do a System Restore back to when they were working?Have you tried using the Windows troubleshooting tool?Have you tried to see if the headphones are recognized by the Desktop? Here is a document called No Sound from the Speakers or Headphones. There are some steps in it that may help you.  The best thing you can do because there are no Windows 10 drivers available for you at this point, is to do your Windows Updates and the HP Support Assistant updates. Just download and run the application and it will help with the software and drivers on your system that need updating. If this reply resolves your issue, please share the good news! Let others know this reply was helpful by clicking the Accept as Solution button at the bottom of this post. To simply say thanks, please click the Thumbs up below! If you require further assistance, I would be more than happy to continue to help you. Please re-post with the results of the troub... Read more

Read other 4 answers
RELEVANCY SCORE 116.8

Hi all,

I've just installed Windows 7 and was very happy to see all the hardware working, even my Realtek HD Audio sound card, except the front jacks.

On windows XP I could solve this by with the Sound Manager that comes with the realtek drivers, and select the "Disable front panel jack detection" check box. Unfortunately, after installing the Vista drivers, I could not start he Sound Manager app beause it said it worked only on Windows Vista.

So, if someone knows a way I could start the manager or how I could set the "Disable front panel jack detection" by modifying the registry, or ofcourse, any other way to make the front jacks work, please help.

Thanks

A:Front jack not working for Realtek HD Audio on Windows 7

I installed it and run it as is and have no problems, everything's working. I don't have to run in compatibility mode or anything. Maybe uninstall it and reinstall
Realtek

Read other 9 answers
RELEVANCY SCORE 115.6

MODS: I post this thread to isolate the most important problem from my previous thread and to make it clearer and easier to answer. I hope that's alright.

I have this on onboard Realtek HD audio card. And no matter if I connect the AC'97 or HD audio adapter to the motherboard, the sound that comes out of the frontjack is cracking. I have no phones or anything the like near my pc, the speakers are turned off and I reinstalled the drivers. Still I have this sound. Any suggestions how to fix it?

Thanks in advance

A:Realtek HD audio - Front jack makes cracking sound

If you really want a better sound output, check if your speaker or headset are plugged tightly.

But you can also lower the sound quality in the settings but this can eliminate the crackling sound. First, close the programs where sound comes out such as media players. Believe me, I had this problem on Realtek in Windows 7 too but I lowered the sound quality to 16 bits 44100 Hz, CD quality and the crackling sound was gone. I posted a screenshot. After you are done with that, refresh the desktop and play an MP3 file and hear if the sound got any better.

But if you really want some better sound, you need to buy a sound card that is fully compatible with Windows 7.

Read other 3 answers
RELEVANCY SCORE 115.6

Hi

I have spent many hours researching this and trying several solutions. I have bought brand new leads just in case. The problem seemed to start from nothing!

I use the front jack only, which I plug into my amp with a 'headphone > 2x phono' lead. Now only the left channel gives out sound. If I use the mono button on the amp it comes through both (so I've eliminated the amp being the problem). As I said I bought new leads. Still no good.

It gets worse, because I tried the rear and side jacks and get nothing through my amp. In the audio manager test screen it does give me sound through eaach REAR speaker but when its plugged into the front jack only left.

I've uninstalled the drivers, got new ones and even uninstalled Windows and tried Windows7 and I still get the same issue.

It is the onboard soundcard and I don't know if it is possible that there could be a fault.

Any help would be brilliant, thanks.

A:Realtek HD Audio Sudden Problem (One Speaker Only on front jack)

Hello & Welcome, moneylife.

If your sound card is on your motherboard, I'd just suggest getting another motherboard since it's most likely a jack malfunction on your sound card.

Try this link for many great deals on sound cards. I've gotten good deals from there, and they don't scam you.

Link; http://www.newegg.com/Store/Category...e=Motherboards

Regards,
Undocked Windy

Read other 1 answers
RELEVANCY SCORE 114.8

Hello all and thank you all for reading my thread, before anything sorry for any language errors, grammar .etc!
So once again like the topic suggest's this is the question. How to change headphone front jack to rear jack & panel without realtek?
Is there possibly some other software that could achieve me changing (by software not hardware) the headphone front panel to the rear panel
without paying for new hardware? (Below I've mentioned that I got a cable from the services that they will apply on the pc in the repair center)
I looked at this thread http://www.tomshardware.co.uk/answe...-port-broke-headphones-rear-port-realtek.html
But I don't know if this will work because I tried downloading realtek for my soundcard and it looks like it doesn't support it.
I also tried installing the realtek program a couple more times but still the same error occured, otherwise it would install and I could run it.
+ I think and fear I may have the same problem where the "set as default" button isn't there because I've had this before many times in the default window sounds tool.
I am trying to find a free solution where I could do the rear port & rear panel thing by software and not having to pay anything "if that's even possible that is" (although the pc repair services are getting me this cable that will be able to do it) I should be getting the pc today but,
They are not sure if the sound will be fixed it would be one of t... Read more

Read other answers
RELEVANCY SCORE 114.4

I’m usually terrible at doing my fair share of posting solutions on the internet but found time for this one.  Come on Dell!  My wife just bought me this great new XPS for Christmas and the headphone jack first requires me to tell the laptop that there is a headphone plugged in to work…..then the menu disappeared altogether and the headphone jack was useless.   My kid’s (2 year old) ipad seems to have no issues detecting a headphone plugged in and he laughs at daddy struggling with his new laptop.  Solution:  I gave updating and rolling back drivers provided by Dell and went to the Realtek site and downloading their drivers and installing.   (HOME > Downloads > Computer Peripheral ICs > PC Audio Codecs > High Definition Audio Codecs > Software).  I at least got the headphone jack to work again,  but will apparently just have to deal with the “MaxAudioPro” menu that appears and asks me what I just stuck into the headphone jack.  I verbally say “well MaxAudioPro, it is a headphone jack with a image of a headphone next to it,  what do you think I plugged in?”
Again,  Come on Dell.  Fairly steamed here.  ….brand new laptop,  I’m not going to return it because it was a very expensive gift, and I won't dedicate time to sit on the phone with tech support because of a home issue, and I don’t need high end stuff.  I just ... Read more

A:XPS 13 9360 - Audio issues - Headphone Jack not working - Realtek MaxAudio menu comes and goes.

Because they moved to the combined audio port, they removed the option to turn off the popup.  So you will likely see that continue.  It can be useful if you use multiple devices, such as External Speakers so you can set preferences for each device.
One thing about the process I find irritating is having to select the OK button, even when the popup shows the correct device.  They need to allow the ability to just use the enter key or any key to continue the process if the correct device is already selected..

Read other 1 answers
RELEVANCY SCORE 114.4

Hello all,

I rercently came with the following problem without any reason:

I have a realtek audio chipset with my mother board.

Since some time, the HD audio drivers keeps on detecting/undetecting a device plugged in my front jack (resulting is sound cutoff, which is more than annoying). But, there is nothing plugged.

If I plug something then, the detection works right.

I'm wondering if it is a software problem, or if there is something wrong with my motherboard or my front jack connector (some kind of shortcut or whatever).

If someone as a solution I would really appreciate.

Thanks a lot in advance !

I cannot uncheck the "reload" option in the realtek driver because I need to have this detection working right.

A:Realtek HD Audio Drivers - Constantly detecting/undetecting front jack

Sounds like a loose or defective jack. No software will "fix" broken hardware. When nothing is in the jack, it's grounded and the chipset ignores or turns off the jack. When you plug something into it, the open ground signals the chipset to detect a device and notify Windows of it's presents. Windows (driver) will then allow you task the jack as necessary.

You don't give any info on your system but some manufactures have spare parts available. Most front panel assemblies are replaceable. Also make sure the front panel connections aren't loose at the motherboard. Be sure to completely power-down the PC and un-plug the power cord before checking wires inside.

Read other 8 answers
RELEVANCY SCORE 105.6

How can I uninstall Dell Audio and only have the legacy Realtek Driver and Software in my XPS 14 (L421x)?
I installed some time age the default audio driver that I got from "Dell Drivers", this installed the "Dell Audio" + "MAXX AUDIO 4". I already uninstalled this thing, run CCleaner, deleted the folders, and downloaded and installed the legacy Realtek R 2.73 driver, but this thing (Dell Audio) is always installing with the driver.  
My system audio is ridiculously loud. I need to put my system audio in somewhat 5~15 / 100% to get "normal audio", the only way I get realistic "normal audio range" is using my SteelSeries Wireless Headset with USB, this way the system audio goes to 100% automatically and I control the audio with the scroll located in the headset, even in 100% max audio, I get a "normal 100%", it's loud, but not EXTREME like the notebook audio!
Another problem, when I plugin my Apple Earpods, they simple doesn't work, I already tested them with tons of devices at home, and they are working great. The system doesn't even recognize them.
I think that everything would be resolved if I could install the Leagacy Realtek drivers & software, not this *** loaded with bloatware from Dell, I don't care about "MAXX Audio", "MaxxSense" and all this BS. If you look with attention, all the settings located in this "Dell Audio" menu are the same in the Real... Read more

A:Dell Audio + Headphone Jack + Loud notebook audio

I forgot to mention in the main post, and I can't edit it, so here it goes:
First, Sometimes I need to run LiveUSB Linux distros in this notebook, and the audio in them is all great, realistic audio range, 100% loud but not extreme, everything OK.
Second, I'm using Windows 8.1 Pro up-to-date.

Read other 5 answers
RELEVANCY SCORE 102.8

Hello,

I have Windows 7 Ultimate 64 bit and I have a problem with sound. When I plug my speakers in front panel I have output audio, but in back panel I don't.

My Audio Manager looks like this, but front panel is enabled and back panel is disabled. It does not recognize back (ANALOG) jack.


I tried with settings in this manager but without success, I cheked Control Panel > Sound and followed instructions but still no sound if speakers is in back panel. What to do?

P.S
Sorry for bad english

A:No sound in back audio panel jack - Realtek HD Audio Manager

What is set as the Default Playback Device? If "Digital" or "HDMI" is set as default you will not get any sound from rear audio connections. "Speaker" must be set as Default Playback Device/

Read other 7 answers
RELEVANCY SCORE 102.8

Hi all,

I'd be grateful for any advice to my problem....

Last month I bought a new PC, a Dell XPS 8500 with an Intel Core i7-3770 processor. The PC has onboard audio (Realtek High Definition Audio).

I didn't buy new speakers as I have a perfectly usable set of Creative 6.1 speakers.

My problem is that although my computer plays Windows event sounds through all the speakers, applications such as iTunes only emit sound through the front pair.

I have googled the problem and as a result have configured the Realtek to use 7.1 audio but without the side pair.

Also, I have disabled the Realtek driver and have reloaded by asking Windows to select the best available.

But still the problem persists.

Any ideas?

Thanks in advance,

dagi

A:No audio except front speakers (Dell, Realtek Audio)

First, for proper operation you must use the Dell supplied sound driver. Non-Dell will either not work or install or will not work properly, and that includes the basic function Windows installed HD Audio Codec.

6.1 is an oddball speaker configuration for current technology systems, its either 2.1, 5.1 or 7.1.

I used to do a lot of support on the Dell users forum (community) and recall that certain applications will only play audio through "stereo" speakers only. My experience on the Dell forum (I had over 37,000 posts and am still registered) also is the reason I note the Dell supplied sound driver.

You could also post on the Dell community Desktop hardware section and one of the user experts there may have more suggestions.

Desktop - Dell Community

Read other 1 answers
RELEVANCY SCORE 100

Hello Eight Forums.

My trouble is the audio output through headphones - background is louder than foreground (especially in music - I often cannot hear the vocals at all; movies however are mostly fine, for reasons unknown to me; but generally, the sound is always different in some way).

I only have one pair of headphones to test it with. However these always worked fine with previous machines, and still do work fine with my iPhone 4. Although they are surely not the case, I cannot with confidence say that if it were a loudspeaker instead things wouldn't have been different.

So this is either a software or a hardware issue.

Software

My computer (details at the bottom) came with a SoundBlaster X-Fi MB3 equalizer program and RealTek High Def Audio drivers. I've uninstalled SoundBlaster hoping it would fix the issue (I didn't need an extra program like that anyway) but alas to no avail. Updating the RealTek drivers did no good still.

The only thing I haven't touched is the ghostly NVIDIA Virtual Audio Device (can it be the source of my trouble?) - I only first noticed it now when copy/pasting the Belarc data. I'll try and find out about it in the meanwhile.

Hardware

I wonder if it perhaps has something to do with my audio jack (laptop's brand new, but you can never know). I have what appears to be mic, headphone, S/PDIF and line in jacks... Is there a way to use the microphone or the line-in to test the headphones? To see if the headphone out is broken.

Any help appreci... Read more

A:Messed up headphone audio; want to check headphone jack

First, the "My System Specs" is where you fill in what you have.

Does the internal speakers on the laptop work? Is the audio OK on the internal speakers?

The SoundBlaster program(s) is a software enhancement to the basic audio chip (ReaklTek). Many PC's now come with some type of enhancement such as the SoundBlaster or in the case of HP PC's its "Beats Audio".

Read other 15 answers
RELEVANCY SCORE 95.6

The headphone/microphone jack on my laptop doesn't work. I have tried multiple headphones with it and i get the same result each time. I have tried looking for solutions but nothing has worked.

Read other answers
RELEVANCY SCORE 95.2

I just installed an ASUS Xonar DX 7.1 audio card along with driver v. 5.12.8.1792. The OS used is Windows XP Pro SP3 (32-bit).

I was hoping that by inserting the headphone jack into the appropriate front panel audio port, the audio through my speakers would be cut off and the only audio output would be through the headphone.

That is not happening. Instead, the audio through my speakers continues and there is no audio through the headphone. Only after I launch Xonar DX Audio Center, and under Analog Out select Headphone, I get audio through the headphone and the audio through the speakers stops.

There must be some setting somewhere that I am missing, right? I can't find any help about this in the FAQ or Troubleshooting sections or Google.

PS: The front panel audio connector is securely connected to the front panel header of the audio card. If it weren't so, I would not get any audio from the headphone at all.
 

Read other answers
RELEVANCY SCORE 95.2

Hello. I have a new, custom build and cannot get the front audio to work. The two USB ports along side the Mic and Headphone jacks work fine.
System Specs
The motherboard is a GA-990XA-UD3. Chipset AMD RD9XO Rev 02. Southbridge AMD
SB10/950 R40. Bios Award Software Ver F8
CPU: AMD Phenom II x6 1090T Black Edition Tuban HDT90ZFBGRBOX
Memory: Corsair Vengeance 16GB 4 x 4GB CMZ16GX3M4A1600C9
OS: Win7 (6.1) Home Premium SP 1 (Build 7601) 64 bit. Direct X 11.0
Don't think it makes a difference but I am running displayport out of the graphics card (Zotac 560 ZT-50701-10M) into the monitor (NEC PA241)

I downloaded updated drivers for the Reatec HD Audio Manager but that made no difference.
Audio out from the back panel works fine.

Any advice on what to try next would be greatly appreciated!

A:GA-990XA-UD3 Front Audio - Headphone and Mic - not working

Do you have the HD Audio connection to the motherboard from the front panel? (you can try the AC97 audio connection but the HD is the one for new motherboards). I'm not familiar with the display port, but I thought that was just video only, not like HDMI which is audio and video.

Do you get rear speaker audio output? If you don't have speakers, connect the headset to the rear GREEN speaker jack to check. If there is sound, its most likely either your connection from the front panel to the motherboard or the front panel. If there is no sound at the rear green speaker jack, check the Control Panel/Hardware and Sound and finally the Sound Panel. In the playback section, your "speakers" should be set as the default audio playback device.

But, it may be the front panel assembly is defective. I've had front panel problems with a couple of cases. I just built a new system, using a Gigabyte Z77X UD5H motherboard and a Corsair Carbide 500R case. There is a fan speed switch on the front panel of the case and it was not working, I had to contact Corsair and they sent a new front panel assembly which fixed the problem.

Read other 3 answers
RELEVANCY SCORE 94.4

Immediately whenever a headphone or earbud is plugged in, the audio is crackly, until I go to the realtek audio manager which doesn't have many options. once I change the Left-Right balance to being very one-sided, the cracks and pops don't occur anymore. However all of the balance is off, voices are not audible, and SFX or background music/tracks are output very bad.Testing the left-right balance, both play the same as if the headphones are mono audio. 

Read other answers
RELEVANCY SCORE 94.4

Possible Solution:
Put Windows to Sleep, then wake it up. Headphone jack audio will be restored.

Problem:
Headphone jack randomly stopped outputting audio.
volume control at 100% and appearing to work normally. Laptop internal speakers worked fine.
Windows detects headphones plugged in, but no sound in headphones.
Uninstall sound card and realtek drivers, reboot did not fix problem.

Tested Linux live CD and headphones worked in Linux.
So hardware was definitely not broken. Only Windows was broken.

(I had this issue recently, so I'm leaving this here for search engine results and anyone who has this problem in the future)

A:Possible fix when headphone jack has no audio, everything else normal

Holy crap i love you! I reinstalled Windows 7 recently to fix this problem after trying just about everything, but after a couple of Windows updates my headphone jack wasn't working again. Found your post after filtering search results to recent hits and this trick worked! This problem only creeped up a short while ago, so maybe it has to do with recent Windows updates.

Read other 1 answers
RELEVANCY SCORE 94.4

I have this flat screen tv that I bought not too long ago. I would like to connect headphones to this tv to watch regular television but there is one big problem. It does not have a headphone jack nor audio rca(red/white) outputs. This pretty strange since this is a fairy new tv. Is there any way I can connect headphones to this tv? Would I need any adapters like somehow converting one of the audio rca inputs to an output so I can use this cable:

http://www.amazon.com/Cables-Go-Ste...1?s=electronics&ie=UTF8&qid=1300791833&sr=1-1
Any suggestions would much be appreciated
 

A:Tv with no Headphone And audio output jack

Y-shaped giszmo which has a male rca connectors
at one end, and a female audio jack at the other could really help the cause you are right
 

Read other 1 answers
RELEVANCY SCORE 94.4

I just recenlty bought a pair of CL harman kardon headphones and after plugging them into my W530 they are as flat as can be and sound horrible to tell the truth.  I plugged them into my Iphone5s and they sound amazing.  Anyone might know what would be causing this?










Solved!
Go to Solution.

A:Poor audio from headphone jack

bad sound DAC chip. I use an external DAC and headphone amp when i listen to music on the ThinkPad.

Read other 9 answers
RELEVANCY SCORE 94.4

Need help fixing the skipping audio that occurs when theres no audio (when things are silent), but when i do play audio it goes away.it doesnt occur when i take the headphones out of the audio jack, speakers are fine(no skip). it seems to skip when i have the headphones plugged in, it skips constantly (silent skip)

Read other answers
RELEVANCY SCORE 94.4

I have a windows 10 laptop and up until yesterday everything was fine , and suddenly it seems that my audio jack doesn;t detect my headphone. I connect my headphone to the audio jack, but the sounds just came out my laptop's speaker. I've tried to switch to my earphone and the result is the same. I've tried several solutions like uninstalling my driver or trying to get to the sounds properties , but the results are the same. Please give me your help , and btw I'm new here.

Read other answers
RELEVANCY SCORE 94.4

Speaker audio works fine. Headphones do not recieve any audio signal. Speakers do not play when headphones are plugged in, as they should.  I could not find an official troubleshooting page for this problem on Windows 10. 










Solved!
View Solution.

A:No audio output from headphone jack

Tried some troubleshooting from another thread, and a hard reset seemed to have done the trick

Read other 2 answers
RELEVANCY SCORE 93.6

Every 2 seconds i get a notifacation that my headphones have been plugged in/unplugged.
i do have headphones, so this is REALLY annoying. i use realtek and many people have this problem but they're not on a laptop/have headphones. can anybody help me? do i need to provide more info? PLEASE HELP ME!!!!

Read other answers
RELEVANCY SCORE 93.6

I have installed Realtek drivers, the speaker is working, but there is no Headphones in the option!?
Also I have reinstalled the drivers 5-6 tyms but still couldnt get Realtek audio manager.
Please see the attachments.

Also in Manage>Device Manager, I see only "High Audio Drivers", it suppose to be mentioned "Realtek Audio drivers" right?

A:No RealTek Audio Manager and Headphone

High Definition Audio Device says the Realtek is NOT installed. High Definition Audio is the generic, basic function, sound driver that Windows installs. This is also probably the reason your headset does not work.

Are you installing the driver from Gigabyte for your motherboard? If not, here is the link to the downloads
GIGABYTE - Motherboard - Socket 775 - GA-G41M-ES2L (rev. 1.3)

Read other 8 answers
RELEVANCY SCORE 93.6

I have just bought a HP Pavilion 15 n-278sa laptop. It comes with a single 3.5mm port which is used for both audio out and line in. The laptop will work fine when outputting sound through the jack and a pair of headphones. However when i try to use the same port as a line in to record sound from an external device i am having some problems. I am trying to connect my mixer to the laptop using a standard lead, red & white one end and 3.5mm jack on the other. At first I was not getting any change whatsoever under the Recording tab in Sound settings. It just says 'not plugged in' under the microphone. After doing some research I found that the lead I was using, a 3 section plug, would not work and that was the reason there was no change when i plugged it in. I bought a 4 section plug & eureka, the laptop recognised the lead & showed this on the Recording tab. I thought my problem was sorted but this was not the case at all. As soon as I plug the red & white end of the lead into the output on the mixer, the laptop screen displays the 'not plugged in' message again as though I have unplugged the lead at the 3.5mm jack end. This makes no sense to me whatsoever?!? How can it recognise the lead is plugged in with no problems but then go back to not recognising it as soon as the other end is plugged into an external output?! Surely there must be a way of rectifying this as currently its impossible to record any sound on the laptop from... Read more

A:Headphone & Microphone Combo Audio Jack

Hi dave_holmes, Welcome to the HP Forums! I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand you are trying to connect your mixer to the notebook. After connecting  the appropriate adapter  it was showing correctly. Once you connected the mixer it disappeared. Here is a link to YouTube, which has  a selection of videos on connecting a mixer to a notebook or laptop, that may assist you.YouTube /connect mixer to laptop As it was seen correctly before you connected the mixer, the notebook is working correctly. You will need to contact the manufacturer of the mixer for instructions on connecting it to a notebook with one input/output port. 

Read other 9 answers
RELEVANCY SCORE 93.6

Hello, I recently bought a Flex 2-14 with Windows 8.1 installed and upgraded it to Windows 10 (Education Version). I haven't tried the sound on the 8.1 system - directly upgraded to Windows 10.Symptoms:When I plug in headphones, the notebook doesn't recognize them. When I unmute/mute using the F1 keys sound comes through the headphone - terrible quality, though. When I change the volume using the F2/F3 keys that switches it back to the loud speakers and so on.It seems to me that the laptop doesn't recognize the headphones at all. When I look into the sound devices in the taskbar, there aren't any headphones listed.Failed attempts to solve the problem:Updating the drivers from the Lenovo website.Updating drivers from Realtek directly.Sleeping/waking the notebook.Turning off the multichannel option with the Realtek HD Audio-Manager.I think that's pretty much all I've tried so far.Most of the times the problem just stayed the same. Sometimes it wouldn't switch back to the speaker when pressing the F1/F2/F3 keys, but that is all that my attempts changed so far.I'm thankful for any hints!

Read other answers
RELEVANCY SCORE 93.6

Hey guys,So I was working on my HP Pavillion notebook and I accidentally tangled my earphone around my neck and broke them, leaving the headphone 3.5mm tip in the audio jack.        I tried everything to remove it, I soldered the end of the broken piece back onto it and tried to pull it out but couldn't, I tried super glue, and glue gun but everything failed. I even contacted and reached out the service centre in my city but they said they will charge me for the whole board coz they won't fix it and instead they will replace it (even though my laptop was only 2 months old). I have given up on getting rid of the broken piece and want any of you guys to help me changing my driver. I tried to uninstall the audio jack from device manager and enabled the speakers but it still won't work I tried several ways to contact HP support but they are out of reach and won't have a similar issue on its forums and guides. if you guys could help me out, that would be amazing.I am immensely grateful for any input or words of advice. Sending it to service is out of the question for monetary reasons.Thank You!

Read other answers
RELEVANCY SCORE 93.6

Hey, I have a flex 14 ideaPad and up until recently everything's been running smoothly audio-wise (when headphones were and were not plugged in), except for randomly a couple of days ago when I plugged headphones into the jack and no sound came through either the headphones or the speakers, although the headphones were detected by the laptop. When I unplugged them sound would come through the speakers again. I tried again with a different set of headphones but the problem reoccurred which lead me to believe the problem is with the laptop, after searching for solutions online I decided to delete and then reinstall the audio drive (Realtech HD Audio Manager). This fixed the problem for a couple of days but now the same problem has returned. I am confused as to whether this is a hardware/software based problem as when I reinstalled the driver it did solve the problem so it couldn't really be hardware related. Would anyone know what the problem is? Should I just keep on deleting and reinstalling the driver? Again the headphones are detected by the laptop, they do not appear as their own playback device though (is this always the case?) Thanks, Tiernan










Solved!
Go to Solution.

A:Flex 14 Headphone Jack/Audio Issue

The Realtek configuration on the Flex has Windows only show a single, common device for all the audio outputs.
 
Here's the latest Realtek driver. If the issue persists after, I would recommend a warranty call.
 
http://www.realtek.com.tw/downloads/downloadsview.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...

Read other 3 answers
RELEVANCY SCORE 93.6

Hi, I just gave m laptop to be repaired in HP and when I got back, the audio jack (Headphone) was not working. The speaker is working fine but the audio jack is not working at all. I couldn't even find the headphone in playback devices. I tried to upgrade my Laptop from windows 8 to 10, but no luck there Laptop Model: HP ENVY TouchSmart 4 UltrabookOS: Windows 10 (Upgraded from windows 8). All updates are installedProduct Number: D2X03EA#ABD I tried all the options I could find on the internet. Please help. Thanks and Regards,Vivek

Read other answers
RELEVANCY SCORE 93.6

How is the microphone jack on the front panel wired? I was told this jack works as Microphone and LINE IN. Is the jack a 3-pole stereo jack or 4-pole jack? If it is 4-pole, does it comply with CTIA standard wiring (Ring2 is common and Sleeve is microphone)?

Read other answers
RELEVANCY SCORE 93.6

Hey guys,So I was working on my HP Pavillion notebook and I accidentally tangled my earphone around my neck and broke them, leaving the headphone 3.5mm tip in the audio jack.        I tried everything to remove it, I soldered the end of the broken piece back onto it and tried to pull it out but couldn't, I tried super glue, and glue gun but everything failed. I even contacted and reached out the service centre in my city but they said they will charge me for the whole board coz they won't fix it and instead they will replace it (even though my laptop was only 2 months old). I have given up on getting rid of the broken piece and want any of you guys to help me changing my driver. I tried to uninstall the audio jack from device manager and enabled the speakers but it still won't work I tried several ways to contact HP support but they are out of reach and won't have a similar issue on its forums and guides. if you guys could help me out, that would be amazing.Thank you!.

Read other answers
RELEVANCY SCORE 93.6

there is no headphone option on my ideapad 310 , only speakers option. i tried uninstalling the sound drivers and the re-installing them  but it proved to be  useless. now audio is being being played through headphones although my laptop has no headphone option on the "playback" tab ,,however after a while the headphone disconnects and then the sound comes out from the speakers again. I'm using windows 1064-bit. Hope anybody out there can help me out. thanks.

Read other answers
RELEVANCY SCORE 93.6

When I plugged in the headphone into the audio jack, there is no sound.  The sound is coming from the internal speakers.  I just installed System Mechanic and ran a system analysis.  I don't know if the registry was changed or what.  There is not a problem with the headphone; I tried another headphone and have the same problem.  The laptop detects the headphone, an icon shows in the Notifications area saying a device was plugged in.

Inspiron 15 series 3543
Realtek HD Audio Device

A:No sound when headphone is plugged into audio jack

Hello. See if it will work when you switch from the Realtel driver to the Windows native audio driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked.7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, then no need to restart.
[To get back to the Realtek driver, do it again but reverse the names in steps 2 and 7.]

Read other 7 answers
RELEVANCY SCORE 93.6

Hi I have Alesis Nitro Kit electronic Drums and i want to record my stuff to my HP ENVY 15-k002ne Notebook PC, i only have headphone jack on my laptop and i want to turn that into audio input. it is possible?

Read other answers
RELEVANCY SCORE 93.6

Hi,  I just made some driver update and windows ( windows anniversary ) update and after installing i do not have any sound with the built in spaker or with my headphone plugged with a jack anymore. But with a usb headphone it works! When i go to the Windows playback devices window there is no device present. I already update the Audio drivers and restart run the audio troubleshooting tool in Windows but nothing new it doesn't work. Gauthier  

Read other answers
RELEVANCY SCORE 93.6

I recently installed a Kinivo Bluetooth adapter (BTD-400) on my HP G71-340US laptop (Windows 7 64-bit OS).  Although the bluetooth adapter works as expected, my headphones don?t get any audio output when plugged into the laptop jack.  I checked the Manage Audio Devices / Sound / Playback panel and the ?Independent Headphones? (IDT High Definition Audio CODEC) are in working order.  In fact, the Headphones can be seen changing status on the Playback panel when I plug in or remove the headphone connection.  So the hardware seems to be working fine just like before. I ran the Microsoft Troubleshooting tool and it did find an issue with the Independent Headphones but was unable to automatically fix it.  The problem was identified as: Audio device isn't set as default.  However, the "Independent Headphones" are listed as the "Default Communications Device" on the Playback tab. I?m not sure what I need to do next to resolve this issue.  Please advise. Thanks.Jeff

Read other answers
RELEVANCY SCORE 93.6

Firstly, I updated to Win 10 about 4 months ago and this problem only showed up yesterday.  Please! read this first (opens in new page and I pasted it just in case) http://h30434.www3.hp.com/t5/Desktop-Audio/HP-Envy-Desktop-headphone-jack-not-working/td-p/4010564 Scroll down to where "RandShouse" writes:"1. Click the Start button.2. Type Beats Audio and select the Beats Audio Control Panel.3. Select Advanced Settings from the top menu.4. Under Jack Information uncheck the box that says Enable auto pop up dialog, when device has been plugged in." What's happening is that my laptop's audio is working with earbud, headphones (anything that works with the headphone jack). But the problem is that terrible Beats software. So if I watch a youtube video with the earbuds then remove them, the laptop audio works perfectly fine! Then Beats kicks in and recognizes that I just unplugged a device when it says "You just unplugged a device." Which makes pefect sense. Because I just removed the earbuds. And for a few seconds, the audio from my laptop (speakers) works perfectly fine. But then Beats audio malfunctions and says that "You just plugged a device...". WHICH IS WRONG. So I tried to follow the steps written by RandShouse but step 4 is not even there. For some reason, I don't have the checkbox and I could go to Control Panel > Sys and Security > Hardware and Sound > Realtek. But I don't have realtek (which has it's better way of dis... Read more

Read other answers
RELEVANCY SCORE 93.6

So my sound completely stopped working the other day and im trying to figure out whats going on. Ive tried updating my drivers and deleting them and reinstalling them but nothing has worked. I have no idea what to do im thinking it may be a hardware problem any suggestions 

Read other answers
RELEVANCY SCORE 93.6

Hi I have had audio issues with my Envy 15 for ages (possibly since W10 upgrade?) and they are now really irritating me. The output on the headphone jack is completely flat - no bass or treble, horrible to listen to. The internal speakers work fine. I have the "IDT High Definition Audio Codec" installed, version 6.10.6491.0. I have tried changing this to "High Definition Audio Device" - this makes the Headphone jack work perfectly, but the internal speakers tinny and horrible. I have searched the forum and can see plenty of people have this problem, but no clear solution. HELP!! Thanks 

Read other answers
RELEVANCY SCORE 93.6

Hi, I just gave m laptop to be repaired in HP and when I got back, the audio jack (Headphone) was not working. The speaker is working fine but the audio jack is not working at all. I couldn't even find the headphone in playback devices. I tried to upgrade my Laptop from windows 8 to 10, but no luck there Laptop Model: HP ENVY TouchSmart 4 UltrabookOS: Windows 10 (Upgraded from windows 8). All updates are installedProduct Number: D2X03EA#ABD I tried all the options I could find on the internet. Please help. Thanks and Regards,Vivek

Read other answers
RELEVANCY SCORE 93.6

I've recently been having a problem with my headphones. The computer recognizes that I've plugged them in but it still uses the external speakers and there's no sound coming through the headphones. I've tried more than one pair of headphones and it still doesn't work. Restarting the computer worked once but not anymore. 










Solved!
Go to Solution.

A:Speaker/headphone/audio jack problem

There is usually a hardware switch in the socket, which is engaged when you put the plug in. Seems like it might be mechanically broken.

Read other 9 answers