Over 1 million tech questions and answers.

AMD Radeon R7 HDMI port issue.

Q: AMD Radeon R7 HDMI port issue.

Hello,

The PC I have with this graphics card has become unusable due to the image onscreen often failing to appear, and when it does appear it doesn't last very long and disappears again. The TV repeatedly tries to put the image onscreen but fails and I have to switch it off. I can use the VGA port on the card without issues.

This problem has been happening for a few weeks. It would happen a few times every few hours but for most of the time the image was stable so I tolerated it. I was running the PC at 4K resolution and thought perhaps the HDMI cable can't cope with that but I don't believe this is the problem as I reduced the resolution to 1920 x 1080 and still have the same problem.

I only have one good HDMI cable and have needed to remove it regularly from the PC's graphics card to use other devices like my PlayStation 3 & 4. Also, sometimes the HDMI cable has been roughly inserted into the PC's graphics card port. I'm thinking the port has been damaged by this which is why I get the intermittent image.

I did some tests and the TV seems to be fine. Is there anything I can do? Or is a new graphics card needed?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: AMD Radeon R7 HDMI port issue.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 70.8

After upgrade to Windows 10, I cannot display from my HP laptop via HDMI to my TV. This is bad since I play movies using my laptop.

Where can I find a display driver that supports Windows 10? The laptop HDMI worked with Windows 7 & 8.

Read other answers
RELEVANCY SCORE 69.2

After I installed my new graphics card physically, I switched my display to a Sony LCD TV and plugged it into the HDMI port on the graphics card. After that, I installed all included device drivers and have since updated my Catalyst drivers. Still, I don't seem to have any sound from the TV, though I can still get sound by hooking up my speakers...

Despite that, I'd really like to get sound out of my TV. Any advice? Here are my specs:

Operating System
MS Windows 7 Home Premium 64-bit
CPU
Intel Core 2 Quad Q8300 @ 2.50GHz 37 ?C
Yorkfield 45nm Technology
RAM
8.0GB Dual-Channel DDR2 @ 399MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. CG5270 (LGA775)
Graphics
SONY TV @ 1360x768
ATI Radeon HD 5700 Series
Hard Drives
977GB Hitachi Hitachi HDT721010SLA360 ATA Device (IDE) 44 ?C
Optical Drives
HL-DT-ST DVDRAM GH40N ATA Device
Audio
High Definition Audio Device

Thanks!

A:No Sound from HDMI Port after installing ATI Radeon 5750 graphics card

Check your sound and see if your device is disabled.

Read other 9 answers
RELEVANCY SCORE 66

I am assuming that for some reason the HDMI port on this particular model is input only? If that is not the case, then I have a bad port. If it is input only then the question is how do I plug in another monitor. The other question is why in the world would it be an input port as opposed to an output port???

Read other answers
RELEVANCY SCORE 65.2

I recently bought a 720p Sony Bravia TV. My laptop is a ASUS M50Sseries with HD capabilities. I wanted to watch a movie from my laptop on my TV So I plugged the HDMI cord in from the laptop to the TV and it adjusted the resolution and the brightness of my laptop. (On a separate note, I couldn't get the sound to work on the TV either) So, once I got done I un plugged my laptop and it adjusted my resolution but my brightness didn't change back. I have tried to adjust both software brightness and hardware brightness. The software actually does change but not enough to matter and the hardware adjustment does nothing, up or down. HELP PLEASE!
 

Read other answers
RELEVANCY SCORE 57.6

My XPS 8700 doesnt have a NVidia HDMI port. What  are my options to fix this if I want to connect to my monitor using an HDMI cable (without using adapters of course)? Is there a way to connect to my monitor via the HDMI port located in the middle left of the model? What is the latter HDMI port used for if it cant  connect to a tv/pc monitor? 

Read other answers
RELEVANCY SCORE 57.6

Unable to connect my compaq cq60 PC using my Hdmi port have trouble shooted hdmi cord using another laptop  and hdmi cord is fine and working so is the TV monitor a message is comming up Signal unkown how do i fix this???? Need for my Hdmi to work on my current laptop  as i use this mostly for work any answers please!.. running windows 10 by the way.

Read other answers
RELEVANCY SCORE 57.6

Spoiler (Highlight to read)  Unable to connect my compaq cq60 PC using my Hdmi port have troubleshoot hdmi cord using another laptop  and hdmi cord is fine and working so is the TV monitor a message is coming up Signal unknown how do i fix this???? Need for my Hdmi to work on my laptop  as i use this mostly for work any answers please!.. running windows 10 by the way.

Read other answers
RELEVANCY SCORE 56.8

I want to use 2 displays using HDMI, but the only problem is that when I plug in my HDMI to my TV through the motherboard, it does not work. I know some do not support it which is why I am coming here. My mother board and graphics card are in my account so look there for the details on my computer. Thank you

A:Can I use my motherboard HDMI port as well as my graphics card HDMI?

I've seen a number of computers where the addition of an Add-in Video card automatically disabled the onboard adapter. The only thing that worked to restore the onboard adapter was to remove that Add-in card. You may want to consider getting a different Add-in card that has 2 HDMI ports. Or if your motherboard has 2 PCIe X16 slots get a 2nd matching card.

Read other 1 answers
RELEVANCY SCORE 53.6

I have just purchased two new monitors that have two hdmi and a vga input but my graphics card has dvi,hdmi and display port so I have one monitor running Strait hdmi and the other one running dvi converted to hdmi but that one I'd very blurb and slightly stretched. So I was wondering if it would be better to run displayport and convert it to hdmi or get a new graphics card.
 

A:Dvi to hdmi or display port to hdmi

Read other 6 answers
RELEVANCY SCORE 50.8

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

Read other 3 answers
RELEVANCY SCORE 50

Just popped in Radeon 4670 replacing 3450. Currently the HDMI is not working. With the 3450 it worked fine. When I look at settings it says that the HDMI is working but volume is 0 when I look at levels the screen is blank there. Any ideas. And I have uninstalled and reinstalled the device as well.
 

A:Radeon 4670 HDMI

maybe you Windows system not have audio engine on board?
deinstall sound card HDMI ftp://file6.mydrivers.com/sound/Realtek_HDMI_R213.zip
and reinstall AMD HDMI audio driver for XP or Vista(download from AMD official site)
=)
 

Read other 1 answers
RELEVANCY SCORE 49.6

I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon graphics and my screen picture is bigger than the display. Icons are cut in half on the left, cannot see start or time on the bottom or left or right. Display section calls it a CV TV15

how do I adjust the screen logical to fit the screen physical. This is the 1st monitor I have had that did not have buttons do do this
 

A:VIORE HDMI WIN 7I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon gra

You need to adjust the graphics settings for the correct resolution for the TV.
 

Read other 2 answers
RELEVANCY SCORE 49.6

I'm using a Dell U3415W monitor. My video card is AMD Radeon RX480. The monitor is connected via DisplayPort to my computer. The monitor is connected via HDMI to my work laptop. When I want to switch over to HDMI, it acts as if I shut off the monitor on the Displayport shifting everything over to my secondary monitor. It causes no problem, but drives me nuts because when I switch back over to DIsplayPort, I have to move my open programs around again. Is there any simple way to make this stop? If I don't use DisplayPort, and instead use HDMI/DVI combination, the behavior described does not happen. I'm guessing that is just the way it is, but I'm hoping there is an easy way to make it stop.

Read other answers
RELEVANCY SCORE 49.6

Hi. I have a HP Pavilion dv4 with AMD ATI Mobility Radeon HD 4200 graphic controller. When I installed Win 10, I was able to use the HDMI port to watch movies in my TV. Some time ago, the HDMI output didn't work anymore. I guess some Win 10 update broke the driver or something similar. I updated Win 10, I updated the controller (it says I have last version) and I checked Windows and AMD web pages without finding any useful help. Any further idea?

Read other answers
RELEVANCY SCORE 49.6

I've recently bought a HIS iCooler V Radeon 5830 from new for $170 on sale and I was wondering about it's HDMI port. I'm going to buy a LG TV/Monitor next to use with my new card (also from newegg), but I've never used HDMI before.

So how does it work? I've noticed there are different types of cables (type a, b, c and d) and I can't find any website detailing which the Radeon 5830 uses, so I was wondering if someone knew and could tell me. Do all recent LCD monitors w/ speakers use the same kind? Will I have to buy a special cable if they don't?

I see that it can transfer audio along the cable too, how will I enable that feature? Will I even need to or is it automatic?

My system specs are:
Athlon II x4 @3ghz, 1.23v
Biostar A785g3
4 gb G. Skill Ripjaw Series @7-7-7-24
WD 640gb HDD
Windows 7 32-bit
 

A:How HDMI and Radeon 5830 will work?

The HDMI cable carries audio as well as video signal. This explains the different cable types you were asking about.
http://www.amazon.com/Mini-HDMI-Type-Male-Female-Adapter/dp/B001L2B9ZG

Just plug it in to your TV and your good to go.
 

Read other 14 answers
RELEVANCY SCORE 49.6

So I have a r9 270 which only has 1 HDMI port. I was wondering if there's a way to have 2 HDMI monitors running on my 270 which only has 1 HDMI port. Would it be worth upgrading graphics cards for this reason? I'm in need for more space so utilize live streaming and editing

A:How do I get 2 HDMI monitors running on my AMD Radeon R9 270?

What other ports do you have. If you have a DVI or a Display port you can ge a Display Port to HDMI converter, or if your monitor has a DVI port just run a DVI cable.

Read other 1 answers
RELEVANCY SCORE 49.6

Hello,
I am hoping to find some guidance on how to view the contents of my laptop on my television. It seems straightforward, but I can not seem to get it to work. I have a Panasonic TH50PX80U (720p) plasma television and HP Pavilion dv 7-1135nr laptop with an ATI Radeon hd 3200 graphics card and the Catalyst Control Center 8.4 software and drivers. I am running on Vista Home Premium 64 bit edition. My TV does not have a PC input, so I am trying to connect via the HDMI port. I have tried to start the laptop with the HDMI cable plugged in and the TV on the HDMI component. I have tried hot plugging the HDMI cable. I have tried the Fn+F4. I have tried extending my monitor in the display settings. I have tried looking up my HDMI port in the BIOS (I did not find it). I am curious as to whether this is even possible with my TV. I am at a loss; if anyone has any information that would help me it would be greatly appreciated. Thanks in advance.

A:ATI Radeon hd 3200 HDMI problems

I know you state you cannot find HDMI in the bios; however, my Asus desktop board (integrated HD3200) shows the hdmi as DisplayPort Config (Enable/Disable) Disable is default. It also states in the book that surroundview has to be enabled under the aperature setting. I have never tested these as I installed add-on card (nvidia 8800) for my build.

Not sure this helps but at least a little more info.

Read other 3 answers
RELEVANCY SCORE 49.6

It's funny that it would stop working the day I had plans with friends to play Amnesia: The Dark Descent all night. Oh, well, though.

So, here's the problem: I installed the card, and initially had no sound. After browsing the forums here, I came across the a very useful thread here. I followed all the steps that were suggested here - I upgraded my ATI Catalyst, made sure the HDMI sound driver was installed, and even tried the Realtek driver suggested on page 2. That one finally worked! This morning when I turned my computer on, everything was fine and dandy until I installed a couple updates from Windows Update, and then upon reboot, there was no sound.

None of the updates had anything to do with audio drivers. They were the malicious software removal tool, an ethernet update from athros, and an update for windows x64 systems. After having no sound, I retried all the steps, but this time to no avail.

System Specs
Windows 7 Ultimate x64
ASUS M4A78T-E motherboard
Phenom II x4 955 Black Processor
Radeon HD 5750 GPU
4GB G. Skill RAM
320 GB Western Digital HDD

***EDIT: Apparently, the Update for Windows x64 (KB976422) disabled my sound driver***

A:Radeon HD 5750 no HDMI sound

Some of the Windows updates corrupt various things. I assume reinstalling the sound driver fixed your problems.

I ran into a problem with Sonar (my recording studio software) that all of a sudden I was getting an error message to reinstall Sonar. I reinstalled and that did not fix it. On a whim I tried starting it as Administrator and it started OK, no errors. As it turned out one of the Windows updates did something to the C:\Program Data folder and just accessing the folder (it required authorization) fixed the Sonar program problem.

Read other 2 answers
RELEVANCY SCORE 49.6

Hey, I'm using an MSI ATI Radeon HD 3850 OC video card, and i'm trying to connect it to my TV using a DVI to HDMI cable. It works, but the problem is: the screen has a very red tint (like the whole screen is red, and it's fine on my regular monitor.) Does anyone know what causes this, or how to fix it? Thanks for any help
 

A:HDMI Problem with ATI Radeon HD 3850...

Read other 7 answers
RELEVANCY SCORE 49.6

Hi,

Basically I use my monitor (DVI) as my primary display and my HDTV as secondary. It was working fine, until one day it starts messing up.

The regular monitor works fine until I plug in my HDMI. When I do that, it blacks out my monitor leaving the cursor frozen on the screen. The TV has no signal.

When I boot I can see it on both screens fine.

I understand this might be a resolution problem because it worked fine when I formatted my computer until i changed the preset to 720p (This worked fine before).

I have tried to:

-uninstall drivers and reinstall drivers
-use the previous drivers
-change hdmi cables

I do not want to format or send back in my card to XFX if I don't need too. Thanks

A:Radeon 5770 HDMI problem

What happens if you just plug in your HDTV and leave the monitor unplugged?

It could be an issue with your computer not reading it correctly when it is plugged in after it has booted.

~Lordbob

Read other 8 answers
RELEVANCY SCORE 49.6

At some point last week I removed the HDMI cable from my video card to use with another device temporarily. Later, after plugging it back in I could not get anything to show up. I later hooked up an extra monitor I had laying around through one of the DVI ports and performed a system restore because the system apparently failed to boot. I have been unable to get the HDMI out to work properly.

When the HDTV is connected with the HDMI cable, both the TV and monitor hooked up via the DVI port behave as if there is no signal (e.g. displaying "no signal"). The DVI monitor does not go blank until what I assume is the Windows login screen shows up. At first all sound would stop too because I had set the HDMI out as the default sound device as well, but chaning to a different default sound device and plugging in the HDMI monitor no longer stops audio. I booted up in safe mode and the monitor plugged in via DVI port does not lose signal, but the HDMI monitor still shows nothing. I wasn't sure what do to from there.

So far I've tried uninstalling and reinstalling the driver for my graphics card, buying a new HDMI cable, and toying around with the card's settings in the Catalyst Command Center (although I barely did anything there).
 

Read other answers
RELEVANCY SCORE 49.2

hi guys.i wanted to know what kinda hdmi port my laptop has? i have a hp envy 15t k300nx laptop and i want to connect it to a benQ led monitor via hdmi purely for gaming purpose.But i dont know what type of hdmi do i have on my laptop. So if any one here knows and can help me out , i will be very thankfull.

Read other answers
RELEVANCY SCORE 49.2

I have a Dell E6410 laptop which has HDMI port. When I was try to connect bet laptop and LCD TV. it is not recognizing. How can I found the HDMI port is working or not and then how do know it has been installed properly.

A:HDMI Port

Your TV must support the resolution that your laptop's video card is putting out.

Check your TV's manual.

Read other 2 answers
RELEVANCY SCORE 49.2

I have a Dell Inspirion 24-5000 all-in-one desktop that according to the specs has an Hdmi-in port on the back.  Try as I might I can't find any info on how to use this. There are plenty of articles on Hdmi-out but none on Hdmi-in.  Any help on this would be greatly appreciated.

Read other answers
RELEVANCY SCORE 49.2

I have an LG smart TV for the past couple of months. ..all going well. Last night when I turned on my TV all i saw was the blue and mostly green of all the cable channels that i tried. Now, at that time I was using my component cables...so I removed them and tried an HDMI connection and got the same result. It turned out that when I changed one HDMI port for another ( I have 4 Hdmi ports ) the channels were in full color again. Does this mean that particular HDMI port is no good anymore? I thought all this time it was my cable box defected.
 

A:HDMI port goes bad

Hard to say. That would appear to be the case, but it doesn't explain why the component input wasn't working.
 

Read other 1 answers
RELEVANCY SCORE 49.2

What do you mean the hdmi port from my graphics card? Did you find out that hdmi port was bad? If so how can I replace it.

Moderator note: Moved from this thread - http://www.techspot.com/community/topics/tv-is-not-detecting-my-pc-via-hdmi.197533/#post-1382473
 

A:Bad HDMI port?

You can't. Return the card to retailer/manufacturer for a repair if it's within warranty.
 

Read other 2 answers
RELEVANCY SCORE 49.2

I just purchased the All-in-One - 27-a027c and it has an HDMI port but when i tried to connect my xbox it doesnt display the xbox one. is there a way to make it change the display from the computer to the xbox?

Read other answers
RELEVANCY SCORE 49.2

AFTER INSTALLING WINDOWS 10. My HDMI EXIT PORT DOESN'T WORK.

Read other answers
RELEVANCY SCORE 49.2

I have an HP Pavilion P6770t that has an onboard DVI and HDMI.  I am trying to connect a second monitor to the HDMI prot but getting no video.  PC has Windows 7 - 64bit.  Went into the Screen Resolution and the monitor does not show up.  I clicked on detect and it does not see it.  I took the DVI cable from the other monitor and plugged it into the second monitor and the computer will see it.  I looked and the BIOS and there was not options for the HDMI port.  Does anyone know how to enable the HDMI port?

Read other answers
RELEVANCY SCORE 49.2

Hi - I've got a new laptop but it doesn't have an HDMI socket. Couple of questions 1) Why would I need an HDMI socket and 2) If good to have.... what exactly do I need to buy in order to adapt, let's say, a USB socket which my laptop does have of course. Info on Google refers to all manner of converters, audio cables etc etc and I'm a bit confused... Thanks
 

A:HDMI port

Read other 7 answers
RELEVANCY SCORE 49.2

Hello guys, First post....

Last night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v.

Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought

im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen!

please help!

Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)

I could figure this out on XP but windows 7 seems beyond me atm!

Thanks guys!
 

A:Using HDMI port to T.V

I'm only guessing but is there an option on your graphics card for an external monitor ?
If so it may identify the hdmi connected tv and tranmit to that as well as your PC.
You may need to adjust the screen resolution.
Is the TV calibrated to accept PC signals ?
 

Read other 1 answers
RELEVANCY SCORE 49.2

Been searching for a HDMI KVM for a couple fo weeks now.

The ATen CS692 is one brand that suits my need. They appear to be in short supply. Prices range from $87 to $150, with RRP being around $125.

Does anyone know of another brand, one that is readily available? And under $100?

I need to connect to PCs via HDMI with USB mouse and keyboard to one monitor/keyboard/mouse?

Eastern suburbs of melbourne, australia for pickup preferred. I guess mail order otherwise if nothing around.

A:Need USB HDMI 2 port KVM

I had checked with ConnectPRO product managers recently. They said by the end of this December, they will release the 2-port and 4-port version with USB DDM and supporting HDCP to meet the demands.

Read other 1 answers
RELEVANCY SCORE 49.2

I just  bought an a new 17 inch INSPIRON laptop. I plug in the HDMI cable connected to my TV and get a picture but the sound is awful   I really would like the audio to be passed from my laptop to the TV and use the sound system of the TV  But how do I do that

Read other answers
RELEVANCY SCORE 49.2

Ok well i basically want to conntect my PC to my TV to stream videos and stuff, and from what i gather it is as easy as plugging a HDMI cable in the HDMI port on my PC and then putting the other end of the HDMI cable into the HDMI port on my TV, is this correct?

My main question is however, how do i check if my PC has a HDMI port/is capable of doing this? I have had a look at the back of the motherboard and there is LOADS of slots for cabables and it's pretty hard to tell if there is actually one there, i think there is but i ain't entirely sure, i wanna know if theres anyway to check if there is one there by checking manually on the PC or something? Just to clarify there is definately one there.

And also i think my Monitor may have a HDMi port, but again i am unsure so if my motherboard didn't have a HDMi port could i just plug the cable into my monitor and it would have the same affect.

My graphics card is a NVIDIA GeForce 7600 GS if that helps..

I hope this makes sense, i just don't wanna buy a HDMI cable and then find out it's no good, i hope it has one cause i'm not gonna bother using DVI converters and stuff as it's probably not that cost affective and i just wanted to do this quickly and easily...

Thanks!
 

A:How to know if my PC has a HDMI Port

Read other 8 answers
RELEVANCY SCORE 49.2

Haven't used a PC with HDMI yet, where exactly is the port on most computers?

Thanks.
 

A:Where will the HDMI port be?

It will be close to the DVI/VGA port. On the back of a dedicated graphics card or within the I/O shield if onboard graphics.
 

Read other 1 answers
RELEVANCY SCORE 48.8

Alright. I've found threads amongst threads about this but none of their solutions have worked for me. The surround sound has worked once in the past but ever since I reinstalled the OS a good while ago I haven't had surround sound out of the HDMI port since. It displays video just fine but when I go into the sound settings it just gives me the option for stereo.

What're some other common things to try to get this to work?

I've disabled all the integrated sound and integrated HDMI stuff in BIOS already as well so everything is solely relying on the ATI 4550 PCIe card.

A:ATI Radeon 4550 HDMI - Vista x32 - No Surround

I had an HD4550 video card. You don't have to disable the regular PC's audio. First, install the lastest drivers for the card from ATI (including the Catalyst Control Center) as it has the sound drivers for the built in (on the Video board) audio. Go to the Control Panel/Hardware and Sound and finally Sound. In the Playback section, select the ATI HDMI as the default playback device.

Read other 7 answers
RELEVANCY SCORE 48.8

I have just done a fresh install of Win 7 Pro on my HP. I am giving the machine to my son so did a complete wipe and installed from scratch. I've got a Radeon 5450 video card and downloaded the latest drivers.The AMD HD audio shows up in my device manager as properly installed. But when I try to configure it I get the 'this device is being used by another application'. Task Manager shows NO other apps running and I ran Msconfig to stop the two programs loading at start that came installed with Catalyst. No joy.

I would note that it all worked fine on my old installation that i wiped.

Read other answers
RELEVANCY SCORE 48.8

I just got a new work computer here (Dell Optiplex 790) and this issue is driving me nuts because my productivity is way down without three monitors, and even further because I'm spending all my time trying to get three monitors to work =D

I have two ATI Radeon HD 6350 video cards with HDMI ports. I'm using two splitters. One splitter for the main card has two Acer monitors hooked up (these work), and the other splitter has a single Acer monitor hooked up and does not work.

I know it works, because I can alternate between monitors but only two at a time.

Now - I've been doing research for about six hours and I just can't figure it out. I've been reading a lot about something called a "display port" but I can confirm that there are no display ports on either video card.

I've included a pic just for fun I guess:

A:Two Radeon HD 6350 (HDMI) not supporting three monitors

Skibbles, welcome to the Seven Forums.

Is it two cards, or is it a single card with a low profile bracket like the one shown here?

If it is a single card, then you can only run two monitors off of it unless you use a splitter. A splitter also defeats the purpose of multi monitor unless you are looking to run the same thing on both (clone).

Read other 9 answers
RELEVANCY SCORE 48.8

Up until the other day, I've been using my MSI Wind u230 netbook / Radeon HD 3200 to output to my monitor (Acer S243HL - only has 1x DVI and 2x HDMI inputs) and then occasionally swap to a Westinghouse 32" TV.

The other day: I was using my monitor then swapped to the tv, and then returned to my room to connect to the monitor and it just won't work. (To note, I've been using Win key + P to set projector only and to disconnect projector before unplugging the HDMI cable.)

The netbook screen will turn itself off (as if it detects the HDMI-out) but the screen or TV will just show "No signal."

I tried a shorter HDMI cable, tried the other input on the monitor, still nothing. Strangely enough, checking the displays in Catalyst or the Screen Resolution properties, it can detect both the TV and the monitor. There's just no signal coming out.

Even stranger: trying to connect another laptop to the monitor (which used to work) displays "No signal" too.

Now I'm confused. Could it be a software issue? Could I have broken an HDMI port somewhere that somehow broke the other two HDMI cables in turn? Help?

A:HDMI-out stopped working, Win x64, Radeon HD 3200

Does the same HDMI input on the TV function properly if you connect, say a gaming console to that port, or a dvd player to that port?

Read other 9 answers
RELEVANCY SCORE 48.8

Hi, I've recently bought a large plasma tv and would like to use it as a second monitor. I have a radeon 9600. I've bought a DVI to HDMI cable and run setup wizard on the catalyst control centre to detect my tv. After selecting my options which include reducing the display to 1024x768 there is still no picture at all. Panasonic TV has been detected by the card/software. The Catalyst Control Centre is version 7. The TV is on HDMI channel 1. The cable is plugged in the HDMI slot 1 and DVI on my graphics card. Anything else I've missed?
 

Read other answers
RELEVANCY SCORE 48.8

I have AMD Phenom X4 desktop running Vista 64 bit with 4GB Ram.
The Graphics Card is ATI Radeon HD 3200 with 780G chipset.
The monitor is ASUS 23.6" HD ready monitor with HDMI input.
The Card also has HDMI output but when i connect the monitor with HDMI cable the resolution suffers, images are blurred & the screen size reduces. I have black borders on all 4 sides. The only good thing is color intensity increases.
The driver s/w version is 8.531.0.0
The monitor works well in VGA mode & tested it with other HDMI inputs - it works well there.
Just the HDMI output from PC has problems

Any suggestions as to how i can get a true HDMI video & full screen?
Regards

A:Re : HDMI Video problems With ATI Radeon HD 3200

the radeon 3200 is an integrated video solution. how much ram is set aside for the video right now? you should have the option in bios to allocate more ram and if so, allocate 512mb or as much as you can. secondly, download the latest software drivers from amd: Drivers & Tools | GAME.AMD.COM

Read other 3 answers
RELEVANCY SCORE 48.8

Hey there guys, my card has an HDMI slot, and I've read that it needs some sort of connector for sound? It didn't come with that or a slot on the card for any wire, but windows does detect it as a ATI DP Output, so I should be able to plug in something with HDMI and get sound from it too correct?

Also... Can the HDMI out work as an HDMI in? Is there something I can use/get that would let this happen? Thanks

A:Radeon HD5870 HDMI/Audio questions

ok yes you should be able to get sound from it, and i've never seen any card that has a hdmi in but i could be wrong

Read other 1 answers
RELEVANCY SCORE 48.8

Sir i have dell gx620 desktop optiplex whenever i use to LPT or COM port for programming purpose its shown an error that  I/O SYSTEM SERVICE IS PRESENT BUT THE DRIVER CANNOT BE CONNECTED TO please solve my problem thanks in advance

Read other answers
RELEVANCY SCORE 48.8

I feel very comfortable around computers, not the sharpest but I can make them work for me.  I purchased an Inspiron 20 Model 3043 in Feb 2016.  It has an HDMI port.   Can I assume that a computer described as "all in one" and in this age of computers, would have an HDMI that operates as an output??

Read other answers
RELEVANCY SCORE 48.8

I buy this woderful notebook with win 8.1 , all works fine, but... the hdmi port seems is not working... nothing appens when i plug the hdmi cable... the tv doesn't recognize the pc... i don't think is a broken port, i think some driver or bios misconfiguration...can you help me please? My video card is the intel 400, i have latest updated driver.. edit: i just read this topic: http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G500-no-output-on-HDMI/m-p/1510940/highlight/t... really cannot i use hdmi ouput because bios doesn't support it??  in 2014?? i can't believe it...please tell it is not true...












Solved!

Go to Solution.

A:HDMI port on G500

Solved... I just used another hdmi cable, with a plug slightly longer... in fact the socket on g500 is  slightly recessed inside than other normal devices...

Read other 3 answers